documentation/docs/install/mac/docker.md

id, title, sidebar_label

id	title	sidebar_label
docker	Installing Prysm on macOS with Docker	Installing with Docker

NOTICE: The Prysm installation script is the easiest and most efficient way of installing the latest binaries. Instructions for using it can be found here.

Prysm can be installed on macOS systems with Docker. This page includes instructions for performing this method.

Have questions? Stop by the #documentation channel on Discord and let us know.

Dependencies

For Docker installations:

• A modern macOS operating system
• The latest release of Docker installed

Installing the beacon chain and validator

1. Ensure you are running the most recent version of Docker by issuing the command:

docker -v

2. To pull the Prysm images, issue the following commands:

docker pull gcr.io/prysmaticlabs/prysm/validator:latest
docker pull gcr.io/prysmaticlabs/prysm/beacon-chain:latest

This process will also install any related dependencies.

For advanced users, the beacon-chain and validator images with Busybox debugging tools bundled in can be fetched instead by appending -alpine to the end of the images in the pull commands above. For example: docker pull .../prysm/validator:latest-alpine.

Connecting to the testnet: running a beacon node

Below are instructions for initialising a beacon node and connecting to the public testnet. To further understand the role that the beacon node plays in Prysm, see this section of the documentation.

NOTICE: It is recommended to open up port tcp/13000 and udp/12000 on your local router to improve connectivity and receive more peers from the network. To do so, navigate to 192.168.0.1 in your browser and login if required. Follow along with the interface to modify your routers firewall settings. When this task is completed, append the parameter--p2p-host-ip=$(curl -s ident.me) to your selected beacon startup command presented in this section to use the newly opened port.

To start your beacon node, issue the following command:

docker run -it -v $HOME/.eth2:/data -p 4000:4000 -p 13000:13000 -p 12000:12000/udp --name beacon-node \

  gcr.io/prysmaticlabs/prysm/beacon-chain:latest \
  --datadir=/data

This will sync up the beacon node with the latest head block in the network.

Not getting enough peers? Refer to the improve P2P connectivity section of this documentation for tips on network configuration.

NOTICE: The beacon node must be completely synced before attempting to initialise a validator client, otherwise the validator will not be able to complete the deposit and funds will lost.

Staking ETH: Running a validator client

For step-by-step assistance with performing a deposit and setting up a validator client, see the activating a validator section of this documentation.

Once your beacon node is up, the chain will be waiting for you to deposit 32 Goerli ETH into a validator deposit contract in order to activate your validator (discussed in the section below).

If you need Goerli ETH, follow the instructions found on prylabs.network to use the testnet faucet. Otherwise, you can contact a team member on Discord to be sent some.

Please note that it may take up to 12 hours for the nodes in the network to process a deposit. Once the node is active, the validator will immediately begin performing its responsibilities.

In your validator client, you will be able to frequently see your validator balance as it goes up over time. Note that, should your node ever go offline for a long period, a validator will start gradually losing its deposit until it is removed from the network entirely.

Congratulations! If you've made it this far, you are now running Ethereum 2.0 Phase 0.

Managing the beacon node with Docker

Below are various methods of controlling the beacon node in Docker installations.

The beacon node can be halted by either using Ctrl+c or with the command:

docker stop beacon-node

To restart the beacon node, issue the following command:

docker start -ai beacon-node

To delete a corrupted container, issue the following command:

docker rm beacon-node

To recreate a deleted container and refresh the chain database, issue the start command with an additional --clear-db parameter:

docker run -it -v $HOME/.eth2:/data -p 4000:4000 -p 13000:13000 -p 12000:12000/udp --name beacon-node \

  gcr.io/prysmaticlabs/prysm/beacon-chain:latest \
  --datadir=/data \
  --clear-db