mirror of
https://github.com/CoolProp/CoolProp.git
synced 2026-01-14 16:38:00 -05:00
149 lines
5.1 KiB
ReStructuredText
149 lines
5.1 KiB
ReStructuredText
|
|
.. _Labview:
|
|
|
|
***************
|
|
Labview Wrapper
|
|
***************
|
|
|
|
.. contents:: :depth: 2
|
|
|
|
Pre-compiled Binaries for windows
|
|
=================================
|
|
|
|
Shared library
|
|
--------------
|
|
|
|
You will need to download the release shared library for windows from :sfdownloads:`sourceforge <shared_library/Windows>` or the development version of the shared library from :sfnightly:`the buildbot server <shared_library/Windows>`. If you are on 32-bit windows, download the __cdecl version. For 64-bit, there is only one calling convention.
|
|
|
|
Place the downloaded shared library next to your library
|
|
|
|
Available libraries
|
|
-------------------
|
|
|
|
:download:`CoolProp.vi` :
|
|
Basic Library to get the properties from CoolProp.dll
|
|
|
|
:download:`CoolProp.llb` :
|
|
More advanced library, allowing to compute thermodynamic diagrams, real-time calculation of properties,
|
|
measurement processing, etc. There is :download:`additional information <CoolProp & Labview.docx>` available for the use of the llb library
|
|
|
|
User-Compiled Binaries for windows
|
|
==================================
|
|
|
|
Check out :ref:`the instructions to build your own shared library <shared_library>`. It should be a __cdecl DLL for 32-bit windows.
|
|
|
|
User-Compiled Binaries for VxWorks (cRIO)
|
|
=========================================
|
|
|
|
Once the toolchain is configured
|
|
--------------------------------
|
|
|
|
To compile::
|
|
|
|
cmake ../.. -DCOOLPROP_VXWORKS_LIBRARY_MODULE=ON -DCMAKE_TOOLCHAIN_FILE=../../dev/cmake/Toolchains/powerpc-vxworks-crio.cmake -DCMAKE_CXX_FLAGS="-D__powerpc__"
|
|
|
|
Use pre-built toolchain from FirstForge
|
|
---------------------------------------
|
|
|
|
Instructions from http://firstforge.wpi.edu/sf/wiki/do/viewPage/projects.c--11_toochain/wiki/BinaryInstall
|
|
|
|
Debian GNU/Linux (Wheezy/Testing)
|
|
|
|
Note: Because of minimal dependencies this may work on other Debian based distributions (e.g. Ubuntu). This is, however, experimental.
|
|
|
|
This currently uses GCC 4.8.0 and Binutils 2.22-8 (default in debian testing).
|
|
|
|
Add this line to /etc/apt/sources.list to add the repository::
|
|
|
|
deb http://debian.repo.frc.s3.amazonaws.com jessie main
|
|
|
|
Add the maintainer key for the repository::
|
|
|
|
sudo wget http://debian.repo.frc.s3.amazonaws.com/rbmj.gpg.key
|
|
sudo apt-key add rbmj.gpg.key
|
|
|
|
Run the following commands::
|
|
|
|
sudo apt-get update
|
|
sudo apt-get install gcc-powerpc-wrs-vxworks
|
|
|
|
Set the WIND_BASE environmental variable (or add to ~/.profile)::
|
|
|
|
export WIND_BASE=/usr/powerpc-wrs-vxworks/wind_base
|
|
|
|
Building your own toolchain for VxWorks Target
|
|
----------------------------------------------
|
|
|
|
Instructions from http://firstforge.wpi.edu/sf/wiki/do/viewPage/projects.c--11_toochain/wiki/ManualInstall
|
|
|
|
Generic Linux/UNIX
|
|
|
|
These are the instructions to build from source manually. Note that some lines begin with $ and some begin with #. Lines that start with a $ can be run as a regular user. Lines that start with # must be run as root (on most distributions, just prefix the command with 'sudo').
|
|
|
|
1: Download all the components::
|
|
|
|
$ wget http://ftp.gnu.org/gnu/gcc/gcc-4.8.2/gcc-4.8.2.tar.bz2
|
|
$ wget http://ftp.gnu.org/gnu/binutils/binutils-2.23.1.tar.bz2
|
|
$ wget ftp://ftp.ni.com/pub/devzone/tut/updated_vxworks63gccdist.zip
|
|
|
|
2: Set WIND_BASE::
|
|
|
|
# echo 'export WIND_BASE=/usr/powerpc-wrs-vxworks/wind_base' >> /etc/profile
|
|
$ source /etc/profile
|
|
|
|
3: Install the WindRiver headers and development resources::
|
|
|
|
$ unzip updated_vxworks63gccdist.zip
|
|
# mkdir -p /usr/powerpc-wrs-vxworks/wind_base/target
|
|
# mkdir -p /usr/powerpc-wrs-vxworks/share/ldscripts
|
|
# cp -R gccdist/WindRiver/vxworks-6.3/host /usr/powerpc-wrs-vxworks/wind_base
|
|
# cp -R gccdist/WindRiver/vxworks-6.3/target/h/. /usr/powerpc-wrs-vxworks/sys-include
|
|
# ln -fsT /usr/powerpc-wrs-vxworks/sys-include/wrn/coreip /usr/powerpc-wrs-vxworks/wind_base/target/h
|
|
# sed '/ENTRY(_start)/d' < /usr/powerpc-wrs-vxworks/wind_base/target/h/tool/gnu/ldscripts/link.OUT > /usr/powerpc-wrs-vxworks/share/ldscripts/dkm.ld
|
|
|
|
4: extract binutils and gcc, and the dependency libraries::
|
|
|
|
$ tar -jxf gcc-4.8.2.tar.bz2
|
|
$ tar -jxf binutils-2.23.1.tar.bz2
|
|
$ cd gcc-4.8.0
|
|
$ ./contrib/download_prerequisites
|
|
$ cd ..
|
|
|
|
5: Build & install binutils::
|
|
|
|
$ mkdir binutils-build
|
|
$ cd binutils-build
|
|
$ ../binutils-2.23.1/configure --prefix=/usr --target=powerpc-wrs-vxworks --disable-nls
|
|
$ make -j4
|
|
# make install
|
|
$ cd ..
|
|
|
|
6: Build & install gcc::
|
|
|
|
$ mkdir gcc-build
|
|
$ cd gcc-build
|
|
$ ../gcc-4.8.2/configure \
|
|
--prefix=/usr \
|
|
--target=powerpc-wrs-vxworks \
|
|
--with-gnu-as \
|
|
--with-gnu-ld \
|
|
--with-headers \
|
|
--disable-shared \
|
|
--disable-libssp \
|
|
--disable-multilib \
|
|
--with-float=hard \
|
|
--enable-languages=c,c++ \
|
|
--enable-libstdcxx \
|
|
--enable-threads=vxworks \
|
|
--without-gconv \
|
|
--disable-libgomp \
|
|
--disable-nls \
|
|
--disable-libmudflap \
|
|
--with-cpu-PPC603 \
|
|
--disable-symvers \
|
|
CFLAGS_FOR_TARGET='-mstrict-align -mlongcall -g -O2' \
|
|
CXXFLAGS_FOR_TARGET='-mstrict-align -mlongcall -g -O2'
|
|
|
|
$ make -j4
|
|
# make install
|