"""
Inverted Pendulum MPC control
author: Atsushi Sakai
"""

import math
import time

import cvxpy
import matplotlib.pyplot as plt
import numpy as np

# Model parameters

l_bar = 2.0  # length of bar
M = 1.0  # [kg]
m = 0.3  # [kg]
g = 9.8  # [m/s^2]

nx = 4  # number of state
nu = 1  # number of input
Q = np.diag([0.0, 1.0, 1.0, 0.0])  # state cost matrix
R = np.diag([0.01])  # input cost matrix

T = 30  # Horizon length
delta_t = 0.1  # time tick
sim_time = 5.0  # simulation time [s]

show_animation = True


def main():
    x0 = np.array([
        [0.0],
        [0.0],
        [0.3],
        [0.0]
    ])

    x = np.copy(x0)
    time = 0.0

    while sim_time > time:
        time += delta_t

        # calc control input
        opt_x, opt_delta_x, opt_theta, opt_delta_theta, opt_input = \
            mpc_control(x)

        # get input
        u = opt_input[0]

        # simulate inverted pendulum cart
        x = simulation(x, u)

        if show_animation:
            plt.clf()
            px = float(x[0])
            theta = float(x[2])
            plot_cart(px, theta)
            plt.xlim([-5.0, 2.0])
            plt.pause(0.001)

    print("Finish")
    print(f"x={float(x[0]):.2f} [m] , theta={math.degrees(x[2]):.2f} [deg]")
    if show_animation:
        plt.show()


def simulation(x, u):
    A, B = get_model_matrix()
    x = np.dot(A, x) + np.dot(B, u)

    return x


def mpc_control(x0):
    x = cvxpy.Variable((nx, T + 1))
    u = cvxpy.Variable((nu, T))

    A, B = get_model_matrix()

    cost = 0.0
    constr = []
    for t in range(T):
        cost += cvxpy.quad_form(x[:, t + 1], Q)
        cost += cvxpy.quad_form(u[:, t], R)
        constr += [x[:, t + 1] == A @ x[:, t] + B @ u[:, t]]

    constr += [x[:, 0] == x0[:, 0]]
    prob = cvxpy.Problem(cvxpy.Minimize(cost), constr)

    start = time.time()
    prob.solve(verbose=False)
    elapsed_time = time.time() - start
    print(f"calc time:{elapsed_time:.6f} [sec]")

    if prob.status == cvxpy.OPTIMAL:
        ox = get_numpy_array_from_matrix(x.value[0, :])
        dx = get_numpy_array_from_matrix(x.value[1, :])
        theta = get_numpy_array_from_matrix(x.value[2, :])
        d_theta = get_numpy_array_from_matrix(x.value[3, :])

        ou = get_numpy_array_from_matrix(u.value[0, :])
    else:
        ox, dx, theta, d_theta, ou = None, None, None, None, None

    return ox, dx, theta, d_theta, ou


def get_numpy_array_from_matrix(x):
    """
    get build-in list from matrix
    """
    return np.array(x).flatten()


def get_model_matrix():
    A = np.array([
        [0.0, 1.0, 0.0, 0.0],
        [0.0, 0.0, m * g / M, 0.0],
        [0.0, 0.0, 0.0, 1.0],
        [0.0, 0.0, g * (M + m) / (l_bar * M), 0.0]
    ])
    A = np.eye(nx) + delta_t * A

    B = np.array([
        [0.0],
        [1.0 / M],
        [0.0],
        [1.0 / (l_bar * M)]
    ])
    B = delta_t * B

    return A, B


def flatten(a):
    return np.array(a).flatten()


def plot_cart(xt, theta):
    cart_w = 1.0
    cart_h = 0.5
    radius = 0.1

    cx = np.array([-cart_w / 2.0, cart_w / 2.0, cart_w /
                   2.0, -cart_w / 2.0, -cart_w / 2.0])
    cy = np.array([0.0, 0.0, cart_h, cart_h, 0.0])
    cy += radius * 2.0

    cx = cx + xt

    bx = np.array([0.0, l_bar * math.sin(-theta)])
    bx += xt
    by = np.array([cart_h, l_bar * math.cos(-theta) + cart_h])
    by += radius * 2.0

    angles = np.arange(0.0, math.pi * 2.0, math.radians(3.0))
    ox = np.array([radius * math.cos(a) for a in angles])
    oy = np.array([radius * math.sin(a) for a in angles])

    rwx = np.copy(ox) + cart_w / 4.0 + xt
    rwy = np.copy(oy) + radius
    lwx = np.copy(ox) - cart_w / 4.0 + xt
    lwy = np.copy(oy) + radius

    wx = np.copy(ox) + bx[-1]
    wy = np.copy(oy) + by[-1]

    plt.plot(flatten(cx), flatten(cy), "-b")
    plt.plot(flatten(bx), flatten(by), "-k")
    plt.plot(flatten(rwx), flatten(rwy), "-k")
    plt.plot(flatten(lwx), flatten(lwy), "-k")
    plt.plot(flatten(wx), flatten(wy), "-k")
    plt.title(f"x: {xt:.2f} , theta: {math.degrees(theta):.2f}")

    # for stopping simulation with the esc key.
    plt.gcf().canvas.mpl_connect(
        'key_release_event',
        lambda event: [exit(0) if event.key == 'escape' else None])

    plt.axis("equal")


if __name__ == '__main__':
    main()