mirror of
https://github.com/TheRobotStudio/SO-ARM100.git
synced 2026-04-30 03:00:08 -04:00
6 lines
787 B
Plaintext
6 lines
787 B
Plaintext
This is an experiment in printing the entire SO-Arm as a single piece that can then articulate once the supports are removed.
|
|
The clearances are only 0.2mm between all parts which has proven to be ok in test pieces, but I find hard to believe will work on the whole thing.
|
|
I shall know by tomorrow morning whether it will move after printing on a Bambu A1, with a 0.4mm brass nozzle, 0.2mm layer thickness with supports above 30degrees in light green PLA+.
|
|
Yes, the colour of PLA effects the end result. Probably due to subtle chemical differences in the dyes but I've no clear hard evidence or research to support this guess.
|
|
I'd welcome any feedback on different machines and settings and whether the finished print can be made to move freely with the present clearance between parts.
|