21 KiB
Procedure - F1 '22 Tests
F1 2022 (F1 '22) is installed via Steam, and considered automated for runs via Markbench. Game settings must be changed in-game prior to a scheduled run in Markbench, and the game exited prior to setting up Markbench.
In Steam, make sure that the In-Game overlay is disabled by going to Steam > Settings > In Game and toggling on the "Enable the Steam Overlay while in-game" followed by toggling it off. There is currently a bug in Steam that it shows as off by default despite the overlay being enabled.
In Markbench, select the F1_22 test from the list on the left side of the Run Test(s) tab and ensure that the Run checkbox beside it is checked. Fill in the settings as follows:
- Project Slug should be the same as the Project Slug you are generating data for
- Test Parameter should be the same as the Test Parameter you are selecting to run, e.g. 'Games-1080', 'Games-1440', 'Games-2160' etc
- Scheduler Delay should be set to 5
- Recording Delay & Recording Timeout should be set to 0
- Repeat should be set to a minimum of 3 for a default run, unless changes are otherwise required
1920x1080
Games-1080
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Set Ray Traced Shadows to Off
- Set Ray Traced Reflections to Off
- Set Ray Traced Ambient Occlusion to Off
- Set Ray Traced Transparent Reflections to Off
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 1920x1080
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Ensure Anti-Aliasing is set to TAA
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
Games-1080-Rt
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 1920x1080
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Ensure Anti-Aliasing is set to TAA
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
2560x1440
Games-1440
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Set Ray Traced Shadows to Off
- Set Ray Traced Reflections to Off
- Set Ray Traced Ambient Occlusion to Off
- Set Ray Traced Transparent Reflections to Off
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 2560x1440
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Ensure Anti-Aliasing is set to TAA
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
Games-1440-DLSS3
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Set Ray Traced Shadows to Off
- Set Ray Traced Reflections to Off
- Set Ray Traced Ambient Occlusion to Off
- Set Ray Traced Transparent Reflections to Off
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 2560x1440
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Set Anti-Aliasing to NVIDIA DLSS
- Ensure DLSS Super Resolution Mode is set to Quality
- Ensure that DLSS Super Resolution Sharpness is set to 50
- Set DLSS Frame Generation to On
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
Games-1440-DLSS3-Rt
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 2560x1440
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Set Anti-Aliasing to NVIDIA DLSS
- Ensure DLSS Super Resolution Mode is set to Quality
- Ensure that DLSS Super Resolution Sharpness is set to 50
- Set DLSS Frame Generation to On
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
Games-1440-Rt
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 2560x1440
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Ensure Anti-Aliasing is set to TAA
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
3840x2160
Games-2160
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Set Ray Traced Shadows to Off
- Set Ray Traced Reflections to Off
- Set Ray Traced Ambient Occlusion to Off
- Set Ray Traced Transparent Reflections to Off
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 3840x2160
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Ensure Anti-Aliasing is set to TAA
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
Games-2160-DLSS3
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Set Ray Traced Shadows to Off
- Set Ray Traced Reflections to Off
- Set Ray Traced Ambient Occlusion to Off
- Set Ray Traced Transparent Reflections to Off
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 3840x2160
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Set Anti-Aliasing to NVIDIA DLSS
- Ensure DLSS Super Resolution Mode is set to Quality
- Ensure that DLSS Super Resolution Sharpness is set to 50
- Set DLSS Frame Generation to On
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
Games-2160-DLSS3-Rt
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 3840x2160
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Set Anti-Aliasing to NVIDIA DLSS
- Ensure DLSS Super Resolution Mode is set to Quality
- Ensure that DLSS Super Resolution Sharpness is set to 50
- Set DLSS Frame Generation to On
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
Games-2160-Rt
In-game, navigate to Game Options > Settings > Graphics Settings.
- Set Detail Preset to Ultra High
- Ensure Ambient Occlusion is set to HBAO+
- Set Variable Rate Shading to Off
Video Mode
- Set Resolution to 3840x2160
- Ensure Display Mode is set to Fullscreen
- Ensure VSync is set to Off
- Ensure Anisotropic Filtering is set to 16x
- Ensure Anti-Aliasing is set to TAA
Benchmark Mode
- Ensure Track is set to Canada
- Ensure Weather Type is set to Wet
- Ensure Number of Laps is set to 3
- Ensure Loop Benchmark Test is set to Off
Once settings are adjusted correctly exit the game. Run tests via Markbench. Results should be uploaded via the Upload tab after all runs have completed successfully.
