* add span
* update ethereumapis
* align server with ethereumapis
* benchmark
* naive implementation
* rename two status functions
* new Inbound and Outbound status functions
* tests
* 'enr:' prefix
* refactoring
* gzl
* case when one filter is empty
* empty filter condition fix
* deepsource
* rename getPeer to peerInfo
* bring back correct version of ethereumapis
* go mod tidy
* Add new GetVersion API to Health Service
This is to support showing version information in the web ui.
Since health.go is built through validator bazel, we can use
`shared.GetVersion` directly.
Backend for: prysmaticlabs/prysm-web-ui#107
* Run goimports and update-go-pbs
* go mod tidy
Co-authored-by: Raul Jordan <raul@prysmaticlabs.com>
* Update go-libp2p to 0.12.0
go-libp2p 0.12.0 made some significant changes to the stream interfaces around
stream closing:
* Close now closes in both directions and frees the stream. However, unlike
FullClose did, it doesn't _wait_ for the remote peer to respond with an EOF.
* To close for writing, call CloseWrite (like one would on a TCP connection, etc.).
This patch:
* Replaces calls to FullClose with Close where appropriate.
* Replaces calls to Close with CloseWrite where appropriate.
* Removes redundant Close calls.
* Calls Reset to where appropriate to indicate that the request/response was
aborted. Unlike Close, this will not flush and will not cause the remote peer
to read an EOF. Instead, the remote peer will read an ErrReset error.
* Ensures we always either close or reset streams. Send wasn't closing the
stream on some error paths.
* Now that stream closing is async, we explicitly wait for a response when
"hanging up" on a peer (so we don't hang up before they receive our
response/goodbye message).
* update bazel
* Gazelle
* revert unintentional bazel workspace change
* appease an overzealous linter
* update to latest
* Refactor encoder
* gazelle
* Gazelle
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
Co-authored-by: Nishant Das <nishdas93@gmail.com>
Co-authored-by: Raul Jordan <raul@prysmaticlabs.com>
* Update blst to v0.3.1 and incorporate subgroup changes
* go mod tidy
* gofmt
* Update bzl blst dependency
* Remove unnecessary check for nil
* Run bazel run //:gazelle -- fix
* Update blst to v0.3.2
* fix sha
Co-authored-by: Nishant Das <nishdas93@gmail.com>
Co-authored-by: Victor Farazdagi <simple.square@gmail.com>
Co-authored-by: Raul Jordan <raul@prysmaticlabs.com>
* fix build from source
* clean up
* update again
* change everything
* workaround for now
* fix versioning
* all passing now
* fix build issues
* clean up
* revert use of MulVerify
* gaz
* stub
* Apply suggestions from code review
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
* fix all
* fix test
* todo
* fix stub
* revert back
* make deep source happy
* Update shared/bls/herumi/public_key.go
* Update shared/bls/blst/signature.go
* Update shared/bls/blst/signature_test.go
* imports
* move iface to common, export errors
* rm iface build
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
Co-authored-by: terence tsao <terence@prysmaticlabs.com>
* remove unused cache states map
* correct typo
* Remove unused array
* Add lock around deposits cache chainstart pubkeys
* Copy attestation before grabbing lock. This may reduce lock contention time as other callers wanting the lock do not need to wait as long for the lock to become available.
* Copy attestation before grabbing lock. This may reduce lock contention time as other callers wanting the lock do not need to wait as long for the lock to become available.
* Set capacity to 1 since it is known that the slice will be 1 after insertion
* require validatorSlashingPreconditionCheck caller to hold lock
* Add lock for voluntary exits pool HasBeenIncluded
* Require rate limiter retrieveCollector to hold lock
* Add lock requirement assertions in sync
* Remove unused struct
* remove ClearCachedStates API
* field initSyncState is unused
Co-authored-by: Raul Jordan <raul@prysmaticlabs.com>
* Update pubsub and fix topicIDs
* WIP filter
* Add suggested code from @bidlocode
* add tests and fix bugs
* more tests
* Wait until state initialized to accept pubsub filtering
* rename for clarity and clarify comment
* fix test builds
* Autofix issues in 2 files
Resolved issues in the following files via DeepSource Autofix:
1. beacon-chain/p2p/pubsub_filter.go
2. beacon-chain/p2p/pubsub_filter_test.go
* @nisdas pr feedback
* pr feedback and fuzz fix
* Update beacon-chain/p2p/pubsub_filter.go
* Must have protocol suffix
* Must have protocol suffix
* gofmt
* rm test, fix panic
* Fix tests
* Add isInitialized check
* Add a few more tests for better coverage
* cache fork digest, make pubsub filter part of the p2p service
* rename service
* gofmt
* Add comment
* fix
Co-authored-by: deepsource-autofix[bot] <62050782+deepsource-autofix[bot]@users.noreply.github.com>
Co-authored-by: Nishant Das <nishdas93@gmail.com>
Co-authored-by: prylabs-bulldozer[bot] <58059840+prylabs-bulldozer[bot]@users.noreply.github.com>
* remove unused code
* remove defer use in loop
* Remove unused methods and constants
* gofmt and gaz
* nilness check
* remove unused args
* Add TODO for refactoring subscribeWithBase to remove unused arg. It seems too involved to include in this sweeping PR. https://github.com/prysmaticlabs/prysm/issues/7437
* replace empty slice declaration
* Remove unnecessary type conversions
* remove redundant type declaration
* rename receivers to be consistent
* Remove bootnode query tool. It is now obsolete by discv5
* Remove relay node. It is no longer used or supported
* Revert "Remove relay node. It is no longer used or supported"
This reverts commit 4bd7717334.
* Delete unused test directory
* Delete unsupported gcp startup script
* Delete old k8s script
* build fixes
* fix build
* go mod tidy
* revert slasher/db/kv/block_header.go
* fix build
* remove redundant nil check
* combine func args
Co-authored-by: prylabs-bulldozer[bot] <58059840+prylabs-bulldozer[bot]@users.noreply.github.com>
Co-authored-by: Victor Farazdagi <simple.square@gmail.com>
* more descriptive password validation error
* include change wallet password fixes
* balance and jwt improvements
* allow for different wallet dirs specified on startup
* ensure wallet password is always validated
* fix up prysm tests
* gaz
* test pass
* pass balances tests
* wrap up fixes
* radek feedback
* fix up tests
* cors fix
* add tests for validator status
* pass tests
* fix n
* skip content type test
* package level cache and send over feed
* package level cache for derived
* all tests passing
* gofmt
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
Co-authored-by: prylabs-bulldozer[bot] <58059840+prylabs-bulldozer[bot]@users.noreply.github.com>
* open web
* Update shared/browser/browser_test.go
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
* Update shared/browser/browser.go
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
* add to depz.bazel
* run gazelle
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
Co-authored-by: prylabs-bulldozer[bot] <58059840+prylabs-bulldozer[bot]@users.noreply.github.com>
* Revert PR #7429 to fix building on windows
* Revert PR #7429 to fix building on windows
Co-authored-by: prylabs-bulldozer[bot] <58059840+prylabs-bulldozer[bot]@users.noreply.github.com>
* Add a journald log format option.
Add an accepted value "journald" for the --log-format flag so that
logs are directed to journald with the correct error level.
* fix docker images
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
* Implement and test GetWeakSubjectivityCheckpoint
* Go mod tidy
* Add mock
Co-authored-by: prylabs-bulldozer[bot] <58059840+prylabs-bulldozer[bot]@users.noreply.github.com>
* Add blst third party dep
* initial build
* add init
* blst passing tests
* add feature flag
* blst and herumi for spec tests
* maybe this works for mac
* Actually set feature flag
* Add stub for VerifyMultipleSignatures for blst
* verifyCompressed
* use correct cores sizes
* aggregate public keys
* add multi-sig verification
* encode not hash
* revert back
* go mod tidy
* update blst to latest commit
* add batch decompress
* fix
* add test
* gofmt
* update blst
* go mod tidy
* remove kubesec, fix
* mod tidy
* disable some remote cache
* disable some remote cache
* disable some remote cache
* disable some remote cache
* Switch to -D__ADX__
* update
* tidy
* fix build
* Make blst for only linux,amd64
* gofmt
* lint
* lint
* gazelle
* fix build tag
* more stub methods
* shift adx instructions to x86
* fix arm64
* Revert "fix arm64"
This reverts commit 4d34ac21b7.
* add one more in
* Revert "Revert "fix arm64""
This reverts commit 1c8ae24ad1.
* try darwin now
* Revert "try darwin now"
This reverts commit 6f884714b8.
* Add sha256
* remove TODO
* checkpoint
* finally builds
* fix up
* add tag
* try again
* explicit disabling
* remove
* select properly
* fix
* better
* make CI happy too
* Update .bazelrc
* Update .bazelrc
* fix tests
* revert back
* Update shared/bls/blst/public_key.go
Co-authored-by: Victor Farazdagi <simple.square@gmail.com>
* Update shared/bls/blst/public_key.go
Co-authored-by: Victor Farazdagi <simple.square@gmail.com>
* clean up tests
* more clean up
* clean up
* add
* Update shared/bls/blst/signature.go
* Update shared/bls/blst/signature.go
* Update .buildkite-bazelrc
Co-authored-by: Preston Van Loon <preston@prysmaticlabs.com>
* try again
* remove go tag
* revert change
* gaz
* gazelle ignore
Co-authored-by: nisdas <nishdas93@gmail.com>
Co-authored-by: Victor Farazdagi <simple.square@gmail.com>
Co-authored-by: prylabs-bulldozer[bot] <58059840+prylabs-bulldozer[bot]@users.noreply.github.com>
* Sync with ethapi
* Implementation and test
* Handle mock
* Fix ProposeExit for e2e
* Merge refs/heads/master into participation
* Preston's feedback
* Merge branch 'participation' of github.com:prysmaticlabs/prysm into participation
* Revert "Revert "Update fastssz" (#7100)"
This reverts commit b954db9704.
* Preston's patch
* Merge branch 'master' of github.com:prysmaticlabs/prysm into revert-7100-revert-6760-update-fssz
* Update fssz, add regression test case
* more HTR with fssz
* fix some tests
* only one test left
* Make it so that HTR will work
* gofmt, imports
* gofmt, imports
* fix
* Merge branch 'master' of github.com:prysmaticlabs/prysm into revert-7100-revert-6760-update-fssz
* fix
* Merge branch 'master' into revert-7100-revert-6760-update-fssz
* Merge refs/heads/master into revert-7100-revert-6760-update-fssz
* gaz
* Merge branch 'revert-7100-revert-6760-update-fssz' of github.com:prysmaticlabs/prysm into revert-7100-revert-6760-update-fssz
* Merge refs/heads/master into revert-7100-revert-6760-update-fssz
* fix test
* Merge branch 'revert-7100-revert-6760-update-fssz' of github.com:prysmaticlabs/prysm into revert-7100-revert-6760-update-fssz
* Merge refs/heads/master into revert-7100-revert-6760-update-fssz
* define auth endpoints
* add intercepter with tests
* auth functions
* fix up the auth functions
* add functions for storing and saving the hashed password from the validator db
* validate strong password input and simplify jwt claims
* tests for db funcs
* comments for db funcs
* wrap up the authentication tests
* register auth srv
* use proper db iface package and check if existing password
* fix broken tests and add new test to check if password already exists
* use roughtime
* rlock to check the auth paths
* Merge refs/heads/master into auth-rpc
* Merge refs/heads/master into auth-rpc
* Merge refs/heads/master into auth-rpc
* leave out the stream interceptor
* resolve confs
* Merge branch 'master' into auth-rpc
* confs
* Merge branch 'auth-rpc' of github.com:prysmaticlabs/prysm into auth-rpc
* Merge refs/heads/master into auth-rpc
* Merge refs/heads/master into auth-rpc
* Merge refs/heads/master into auth-rpc
* Merge refs/heads/master into auth-rpc
