If, for some reason, Redis decides not to execute the script, we need
to pop the function and error handler from Lua stack. Otherwise, eventually
the Lua stack will explode.
Relevant only for 7.0-rc1 and 7.0-rc2.
* Fix race condition where node loses its last slot and turns into replica
When a node has lost its last slot and finds out from the SETSLOT command
before the cluster bus PONG from the new owner arrives. In this case, the
node didn't turn itself into a replica of the new slot owner.
This commit adds the same logic to the SETSLOT command as already exists
for the cluster bus PONG processing.
* Revert "Fix new / failing cluster slot migration test (#10482)"
This reverts commit 0b21ef8d49.
In this test, the old slot owner finds out that it has lost its last
slot in a nondeterministic way. Either the cluster bus PONG from the
new slot owner and sometimes in a SETSLOT command from redis-cli. In
both cases, the result should be the same and the old owner should
turn itself into a replica of the new slot owner.
On error, redis-cli was returning `REDIS_ERR` on some cases by mistake. `REDIS_ERR` is `-1` which becomes `255` as exit code. This commit changes it and returns `1` on errors to be consistent.
This feature adds the ability to add four different types (Bool, Numeric,
String, Enum) of configurations to a module to be accessed via the redis
config file, and the CONFIG command.
**Configuration Names**:
We impose a restriction that a module configuration always starts with the
module name and contains a '.' followed by the config name. If a module passes
"config1" as the name to a register function, it will be registered as MODULENAME.config1.
**Configuration Persistence**:
Module Configurations exist only as long as a module is loaded. If a module is
unloaded, the configurations are removed.
There is now also a minimal core API for removal of standardConfig objects
from configs by name.
**Get and Set Callbacks**:
Storage of config values is owned by the module that registers them, and provides
callbacks for Redis to access and manipulate the values.
This is exposed through a GET and SET callback.
The get callback returns a typed value of the config to redis. The callback takes
the name of the configuration, and also a privdata pointer. Note that these only
take the CONFIGNAME portion of the config, not the entire MODULENAME.CONFIGNAME.
```
typedef RedisModuleString * (*RedisModuleConfigGetStringFunc)(const char *name, void *privdata);
typedef long long (*RedisModuleConfigGetNumericFunc)(const char *name, void *privdata);
typedef int (*RedisModuleConfigGetBoolFunc)(const char *name, void *privdata);
typedef int (*RedisModuleConfigGetEnumFunc)(const char *name, void *privdata);
```
Configs must also must specify a set callback, i.e. what to do on a CONFIG SET XYZ 123
or when loading configurations from cli/.conf file matching these typedefs. *name* is
again just the CONFIGNAME portion, *val* is the parsed value from the core,
*privdata* is the registration time privdata pointer, and *err* is for providing errors to a client.
```
typedef int (*RedisModuleConfigSetStringFunc)(const char *name, RedisModuleString *val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetNumericFunc)(const char *name, long long val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetBoolFunc)(const char *name, int val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetEnumFunc)(const char *name, int val, void *privdata, RedisModuleString **err);
```
Modules can also specify an optional apply callback that will be called after
value(s) have been set via CONFIG SET:
```
typedef int (*RedisModuleConfigApplyFunc)(RedisModuleCtx *ctx, void *privdata, RedisModuleString **err);
```
**Flags:**
We expose 7 new flags to the module, which are used as part of the config registration.
```
#define REDISMODULE_CONFIG_MODIFIABLE 0 /* This is the default for a module config. */
#define REDISMODULE_CONFIG_IMMUTABLE (1ULL<<0) /* Can this value only be set at startup? */
#define REDISMODULE_CONFIG_SENSITIVE (1ULL<<1) /* Does this value contain sensitive information */
#define REDISMODULE_CONFIG_HIDDEN (1ULL<<4) /* This config is hidden in `config get <pattern>` (used for tests/debugging) */
#define REDISMODULE_CONFIG_PROTECTED (1ULL<<5) /* Becomes immutable if enable-protected-configs is enabled. */
#define REDISMODULE_CONFIG_DENY_LOADING (1ULL<<6) /* This config is forbidden during loading. */
/* Numeric Specific Configs */
#define REDISMODULE_CONFIG_MEMORY (1ULL<<7) /* Indicates if this value can be set as a memory value */
```
**Module Registration APIs**:
```
int (*RedisModule_RegisterBoolConfig)(RedisModuleCtx *ctx, char *name, int default_val, unsigned int flags, RedisModuleConfigGetBoolFunc getfn, RedisModuleConfigSetBoolFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterNumericConfig)(RedisModuleCtx *ctx, const char *name, long long default_val, unsigned int flags, long long min, long long max, RedisModuleConfigGetNumericFunc getfn, RedisModuleConfigSetNumericFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterStringConfig)(RedisModuleCtx *ctx, const char *name, const char *default_val, unsigned int flags, RedisModuleConfigGetStringFunc getfn, RedisModuleConfigSetStringFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterEnumConfig)(RedisModuleCtx *ctx, const char *name, int default_val, unsigned int flags, const char **enum_values, const int *int_values, int num_enum_vals, RedisModuleConfigGetEnumFunc getfn, RedisModuleConfigSetEnumFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_LoadConfigs)(RedisModuleCtx *ctx);
```
The module name will be auto appended along with a "." to the front of the name of the config.
**What RM_Register[...]Config does**:
A RedisModule struct now keeps a list of ModuleConfig objects which look like:
```
typedef struct ModuleConfig {
sds name; /* Name of config without the module name appended to the front */
void *privdata; /* Optional data passed into the module config callbacks */
union get_fn { /* The get callback specificed by the module */
RedisModuleConfigGetStringFunc get_string;
RedisModuleConfigGetNumericFunc get_numeric;
RedisModuleConfigGetBoolFunc get_bool;
RedisModuleConfigGetEnumFunc get_enum;
} get_fn;
union set_fn { /* The set callback specified by the module */
RedisModuleConfigSetStringFunc set_string;
RedisModuleConfigSetNumericFunc set_numeric;
RedisModuleConfigSetBoolFunc set_bool;
RedisModuleConfigSetEnumFunc set_enum;
} set_fn;
RedisModuleConfigApplyFunc apply_fn;
RedisModule *module;
} ModuleConfig;
```
It also registers a standardConfig in the configs array, with a pointer to the
ModuleConfig object associated with it.
**What happens on a CONFIG GET/SET MODULENAME.MODULECONFIG:**
For CONFIG SET, we do the same parsing as is done in config.c and pass that
as the argument to the module set callback. For CONFIG GET, we call the
module get callback and return that value to config.c to return to a client.
**CONFIG REWRITE**:
Starting up a server with module configurations in a .conf file but no module load
directive will fail. The flip side is also true, specifying a module load and a bunch
of module configurations will load those configurations in using the module defined
set callbacks on a RM_LoadConfigs call. Configs being rewritten works the same
way as it does for standard configs, as the module has the ability to specify a
default value. If a module is unloaded with configurations specified in the .conf file
those configurations will be commented out from the .conf file on the next config rewrite.
**RM_LoadConfigs:**
`RedisModule_LoadConfigs(RedisModuleCtx *ctx);`
This last API is used to make configs available within the onLoad() after they have
been registered. The expected usage is that a module will register all of its configs,
then call LoadConfigs to trigger all of the set callbacks, and then can error out if any
of them were malformed. LoadConfigs will attempt to set all configs registered to
either a .conf file argument/loadex argument or their default value if an argument is
not specified. **LoadConfigs is a required function if configs are registered.
** Also note that LoadConfigs **does not** call the apply callbacks, but a module
can do that directly after the LoadConfigs call.
**New Command: MODULE LOADEX [CONFIG NAME VALUE] [ARGS ...]:**
This command provides the ability to provide startup context information to a module.
LOADEX stands for "load extended" similar to GETEX. Note that provided config
names need the full MODULENAME.MODULECONFIG name. Any additional
arguments a module might want are intended to be specified after ARGS.
Everything after ARGS is passed to onLoad as RedisModuleString **argv.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <matolson@amazon.com>
Co-authored-by: sundb <sundbcn@gmail.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
This commit improve malloc efficiency of the slots_info_pairs mechanism in cluster.c
by changing adlist into an array being realloced with greedy growth mechanism
Recently the cluster tests are consistently failing when executed with ASAN in the CI.
I tried to track down the commit that started it, and it appears to be #10293.
Looking at the commit, i realize it didn't affect this test / flow, other than the
replacement of the slots_info_pairs from sds to list.
I concluded that what could be happening is that the slot range is very fragmented,
and that results in many allocations.
with sds, it results in one allocation and also, we have a greedy growth mechanism,
but with adlist, we just have many many small allocations.
this probably causes stress on ASAN, and causes it to be slow at termination.
There are a few places that use a hard coded const of 128 to allocate a buffer for d2string.
Replace these with a clear macro.
Note that In theory, converting double into string could take as much as nearly 400 chars,
but since d2string uses `%g` and not `%f`, it won't pass some 40 chars.
unrelated:
restore some changes to auto generated commands.c that got accidentally reverted in #10293
a missing of resp3 judgement which may lead to the crash using `debug protocol push`
introduced in #9235
Similar improvement in RM_ReplySetAttributeLength in case the module ignored the
error that returned from RM_ReplyWithAttribute.
Co-authored-by: Oran Agra <oran@redislabs.com>
To remove `pending_querybuf`, the key point is reusing `querybuf`, it means master client's `querybuf` is not only used to parse command, but also proxy to sub-replicas.
1. add a new variable `repl_applied` for master client to record how many data applied (propagated via `replicationFeedStreamFromMasterStream()`) but not trimmed in `querybuf`.
2. don't sdsrange `querybuf` in `commandProcessed()`, we trim it to `repl_applied` after the whole replication pipeline processed to avoid fragmented `sdsrange`. And here are some scenarios we cannot trim to `qb_pos`:
* we don't receive complete command from master
* master client blocked because of client pause
* IO threads operate read, master client flagged with CLIENT_PENDING_COMMAND
In these scenarios, `qb_pos` points to the part of the current command or the beginning of next command, and the current command is not applied yet, so the `repl_applied` is not equal to `qb_pos`.
Some other notes:
* Do not do big arg optimization on master client, since we can only sdsrange `querybuf` after data sent to replicas.
* Set `qb_pos` and `repl_applied` to 0 when `freeClient` in `replicationCacheMaster`.
* Rewrite `processPendingCommandsAndResetClient` to `processPendingCommandAndInputBuffer`, let `processInputBuffer` to be called successively after `processCommandAndResetClient`.
Avoid printing "Killed by PID" when si_code != SI_USER.
Apparently SI_USER isn't always set to 0. e.g. on Mac it's 0x10001 and the check that did <= was wrong.
The PR extends RM_Call with 3 new capabilities using new flags that
are given to RM_Call as part of the `fmt` argument.
It aims to assist modules that are getting a list of commands to be
executed from the user (not hard coded as part of the module logic),
think of a module that implements a new scripting language...
* `S` - Run the command in a script mode, this means that it will raise an
error if a command which are not allowed inside a script (flaged with the
`deny-script` flag) is invoked (like SHUTDOWN). In addition, on script mode,
write commands are not allowed if there is not enough good replicas (as
configured with `min-replicas-to-write`) and/or a disk error happened.
* `W` - no writes mode, Redis will reject any command that is marked with `write`
flag. Again can be useful to modules that implement a new scripting language
and wants to prevent any write commands.
* `E` - Return errors as RedisModuleCallReply. Today the errors that happened
before the command was invoked (like unknown commands or acl error) return
a NULL reply and set errno. This might be missing important information about
the failure and it is also impossible to just pass the error to the user using
RM_ReplyWithCallReply. This new flag allows you to get a RedisModuleCallReply
object with the relevant error message and treat it as if it was an error that was
raised by the command invocation.
Tests were added to verify the new code paths.
In addition small refactoring was done to share some code between modules,
scripts, and `processCommand` function:
1. `getAclErrorMessage` was added to `acl.c` to unified to log message extraction
from the acl result
2. `checkGoodReplicasStatus` was added to `replication.c` to check the status of
good replicas. It is used on `scriptVerifyWriteCommandAllow`, `RM_Call`, and
`processCommand`.
3. `writeCommandsGetDiskErrorMessage` was added to `server.c` to get the error
message on persistence failure. Again it is used on `scriptVerifyWriteCommandAllow`,
`RM_Call`, and `processCommand`.
When rewrite the config file, we need read the old config file first,
but the CONFIG_MAX_LEN is 1024, so if some lines are longer than it,
it will generate a wrong config file, and redis cannot reboot from
the new config file.
Rename CONFIG_MAX_LINE to CONFIG_READ_LEN
Use exit code 1 if redis-cli fails to connect.
Before https://github.com/redis/redis/pull/10382/, on a connection failure,
exit code would be 1. After this PR, whether connection is established or not,
`noninteractive()` return value is used as the exit code. On a failure, this function
returns `REDIS_ERR` which is `-1`. It becomes `255` as exit codes are between `0-255`.
There is nothing wrong by returning 1 or 255 on failure as far as I know but it'll break
things that expect to see 1 as exit code on a connection failure. This is also how we
realized the issue. With this PR, changing behavior back to using 1 as exit code to
preserve backward compatibility.
fix#10439. see https://github.com/redis/redis/pull/9872
When executing SHUTDOWN we pause the client so we can un-pause it
if the shutdown fails.
this could happen during the timeout, if the shutdown is aborted, but could
also happen from withing the initial `call()` to shutdown, if the rdb save fails.
in that case when we return to `call()`, we'll crash if `c->cmd` has been set to NULL.
The call stack is:
```
unblockClient(c)
replyToClientsBlockedOnShutdown()
cancelShutdown()
finishShutdown()
prepareForShutdown()
shutdownCommand()
```
what's special about SHUTDOWN in that respect is that it can be paused,
and then un-paused before the original `call()` returns.
tests where added for both failed shutdown, and a followup successful one.
After migrating a slot, send CLUSTER SETSLOT NODE to the destination
node first to make sure the slot isn't left without an owner in case
the destination node crashes before it is set as new owner.
When informing the source node, it can happen that the destination
node has already informed it and if the source node has lost its
last slot, it has already turned itself into a replica. Redis-cli
should ignore this error in this case.
Implement a new cluster shards command, which provides a flexible and extensible API for topology discovery.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Currently the sort and sort_ro can access external keys via `GET` and `BY`
in order to make sure the user cannot violate the authorization ACL
rules, the decision is to reject external keys access patterns unless ACL allows
SORT full access to all keys.
I.e. for backwards compatibility, SORT with GET/BY keeps working, but
if ACL has restrictions to certain keys, these features get permission denied.
### Implemented solution
We have discussed several potential solutions and decided to only allow the GET and BY
arguments when the user has all key permissions with the SORT command. The reasons
being that SORT with GET or BY is problematic anyway, for instance it is not supported in
cluster mode since it doesn't declare keys, and we're not sure the combination of that feature
with ACL key restriction is really required.
**HOWEVER** If in the fullness of time we will identify a real need for fine grain access
support for SORT, we would implement the complete solution which is the alternative
described below.
### Alternative (Completion solution):
Check sort ACL rules after executing it and before committing output (either via store or
to COB). it would require making several changes to the sort command itself. and would
potentially cause performance degradation since we will have to collect all the get keys
instead of just applying them to a temp array and then scan the access keys against the
ACL selectors. This solution can include an optimization to avoid the overheads of collecting
the key names, in case the ACL rules grant SORT full key-access, or if the ACL key pattern
literal matches the one used in GET/BY. It would also mean that authorization would be
O(nlogn) since we will have to complete most of the command execution before we can
perform verification
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
In a benchmark we noticed we spend a relatively long time updating the client
memory usage leading to performance degradation.
Before #8687 this was performed in the client's cron and didn't affect performance.
But since introducing client eviction we need to perform this after filling the input
buffers and after processing commands. This also lead me to write this code to be
thread safe and perform it in the i/o threads.
It turns out that the main performance issue here is related to atomic operations
being performed while updating the total clients memory usage stats used for client
eviction (`server.stat_clients_type_memory[]`). This update needed to be atomic
because `updateClientMemUsage()` was called from the IO threads.
In this commit I make sure to call `updateClientMemUsage()` only from the main thread.
In case of threaded IO I call it for each client during the "fan-in" phase of the read/write
operation. This also means I could chuck the `updateClientMemUsageBucket()` function
which was called during this phase and embed it into `updateClientMemUsage()`.
Profiling shows this makes `updateClientMemUsage()` (on my x86_64 linux) roughly x4 faster.
For an integer string like "123456789012345678901" which could cause
overflow-failure in string2ll() conversion, we could compare its length at
the beginning to avoid extra work.
* move LONG_STR_SIZE to be in declared in util.h, next to MAX_LONG_DOUBLE_CHARS
Better check the monitors list argument instead of server.monitors in the function,
although they are basically the same in the context, so this doesn't have any
impact on the current code.
When updating SENTINEL with master’s new password (command:
`SENTINEL SET mymaster auth-pass some-new-password`),
sentinel might still keep the old connection and avoid reconnecting
with the new password. This is because of wrong logic that traces
the last ping (pong) time to servers. In fact it worked fine until 8631e64
changed the condition to send ping. To resolve it with minimal risk,
let’s disconnect master and replicas once changing password/user.
Based on earlier work of yz1509.
The following usage will output an empty newline:
```
> redis-cli help set
empty line
```
The reason is that in interactive mode, we have called
`cliInitHelp`, which initializes help.
When using `redis-cli help xxx` or `redis-cli help ? xxx`,
we can't match the command due to empty `helpEntries`,
so we output an empty newline.
In this commit, we will call `cliInitHelp` to init the help.
Note that in this case, we need to call `cliInitHelp` (COMMAND DOCS)
every time, which i think is acceptable.
So now the output will look like:
```
[redis]# src/redis-cli help get
GET key
summary: Get the value of a key
since: 1.0.0
group: string
[redis]#
```
Fixes#10378
This PR also fix a redis-cli crash when using `--ldb --eval`:
```
[root]# src/redis-cli --ldb --eval test.lua test 1
Lua debugging session started, please use:
quit -- End the session.
restart -- Restart the script in debug mode again.
help -- Show Lua script debugging commands.
* Stopped at 1, stop reason = step over
-> 1 local num = redis.call('GET', KEYS[1]);
redis-cli: redis-cli.c:718: cliCountCommands: Assertion
`commandTable->element[i]->type == 1' failed.
Aborted
```
Because in ldb mode, `COMMAND DOCS` or `COMMAND` will
return an array, only with one element, and the type
is `REDIS_REPLY_STATUS`, the result is `<error> Unknown
Redis Lua debugger command or wrong number of arguments`.
So if we are in the ldb mode, and init the Redis HELP, we
will get the wrong response and crash the redis-cli.
In ldb mode we don't initialize HELP, help is only initialized
after the lua debugging session ends.
It was broken in #10043
* fix-replication-comments
The described capacity
`and to schedule a new BGSAVE if there are slaves that attached while a BGSAVE was in progress`
was moved to `checkChildrenDone()` named by `replicationStartPendingFork`
But the comment was not changed, may misleading others.
* remove-misleading-comments
The described capacity
`to schedule a new BGSAVE if there are slaves that attached while a BGSAVE was in progress`
and
`or when the replication RDB transfer strategy is modified from disk to socket or the other way around`
were not correct now.
* stats and latency commands have non-deterministic output.
* the ones about latency should be sent to ALL_NODES (considering
reads from replicas)
* the ones about running scripts and memory usage only to masters.
* stats aggregation is SPECIAL (like in INFO)
Deleting a stream while a client is blocked XREADGROUP should unblock the client.
The idea is that if a client is blocked via XREADGROUP is different from
any other blocking type in the sense that it depends on the existence of both
the key and the group. Even if the key is deleted and then revived with XADD
it won't help any clients blocked on XREADGROUP because the group no longer
exist, so they would fail with -NOGROUP anyway.
The conclusion is that it's better to unblock these clients (with error) upon
the deletion of the key, rather than waiting for the first XADD.
Other changes:
1. Slightly optimize all `serveClientsBlockedOn*` functions by checking `server.blocked_clients_by_type`
2. All `serveClientsBlockedOn*` functions now use a list iterator rather than looking at `listFirst`, relying
on `unblockClient` to delete the head of the list. Before this commit, only `serveClientsBlockedOnStreams`
used to work like that.
3. bugfix: CLIENT UNBLOCK ERROR should work even if the command doesn't have a timeout_callback
(only relevant to module commands)
In some special commands like eval_ro / fcall_ro we allow no-writes commands.
But may-replicate commands are no-writes too, that leads crash when client pause write:
