New test fails on valgrind because strtold("+inf") with valgrind returns a non-inf result
same thing is done in incr.tcl.
(cherry picked from commit c3b7bde914)
This bug seems to be there forever, CLIENT REPLY OFF|SKIP will
mark the client with CLIENT_REPLY_OFF or CLIENT_REPLY_SKIP flags.
With these flags, prepareClientToWrite called by addReply* will
return C_ERR directly. So the client can't receive the Pub/Sub
messages and any other push notifications, e.g client side tracking.
In this PR, we adding a CLIENT_PUSHING flag, disables the reply
silencing flags. When adding push replies, set the flag, after the reply,
clear the flag. Then add the flag check in prepareClientToWrite.
Fixes#11874
Note, the SUBSCRIBE command response is a bit awkward,
see https://github.com/redis/redis-doc/pull/2327
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 416842e6c0)
(cherry picked from commit f8ae7a414c)
The existing logic for killing pub-sub clients did not handle the `allchannels`
permission correctly. For example, if you:
ACL SETUSER foo allchannels
Have a client authenticate as the user `foo` and subscribe to a channel, and then:
ACL SETUSER foo resetchannels
The subscribed client would not be disconnected, though new clients under that user
would be blocked from subscribing to any channels.
This was caused by an incomplete optimization in `ACLKillPubsubClientsIfNeeded`
checking whether the new channel permissions were a strict superset of the old ones.
(cherry picked from commit f38aa6bfb7)
(cherry picked from commit 9caeadb866)
Check the validity of the value before performing the create operation,
prevents new data from being generated even if the request fails to execute.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
(cherry picked from commit bc7fe41e58)
(cherry picked from commit 606a385935)
Issue happens when passing a negative long value that greater than
the max positive value that the long can store.
(cherry picked from commit 41430af6a821c551abb862666ef896f2c196dea6)
Authenticated users can use string matching commands with a
specially crafted pattern to trigger a denial-of-service attack on Redis,
causing it to hang and consume 100% CPU time.
(cherry picked from commit e75f92047c22e659d49bba3a083cd0c9935f21e6)
In #7875 (Redis 6.2), we changed the sds alloc to be the usable allocation
size in order to:
> reduce the need for realloc calls by making the sds implicitly take over
the internal fragmentation
This change was done most sds functions, excluding `sdsRemoveFreeSpace` and
`sdsResize`, the reason is that in some places (e.g. clientsCronResizeQueryBuffer)
we call sdsRemoveFreeSpace when we see excessive free space and want to trim it.
so if we don't trim it exactly to size, the caller may still see excessive free space and
call it again and again.
However, this resulted in some excessive calls to realloc, even when there's no need
and it's gonna be a no-op (e.g. when reducing 15 bytes allocation to 13).
It turns out that a call for realloc with jemalloc can be expensive even if it ends up
doing nothing, so this PR adds a check using `je_nallocx`, which is cheap to avoid
the call for realloc.
in addition to that this PR unifies sdsResize and sdsRemoveFreeSpace into common
code. the difference between them was that sdsResize would avoid using SDS_TYPE_5,
since it want to keep the string ready to be resized again, while sdsRemoveFreeSpace
would permit using SDS_TYPE_5 and get an optimal memory consumption.
now both methods take a `would_regrow` argument that makes it more explicit.
the only actual impact of that is that in clientsCronResizeQueryBuffer we call both sdsResize
and sdsRemoveFreeSpace for in different cases, and we now prevent the use of SDS_TYPE_5 in both.
The new test that was added to cover this concern used to pass before this PR as well,
this PR is just a performance optimization and cleanup.
Benchmark:
`redis-benchmark -c 100 -t set -d 512 -P 10 -n 100000000`
on i7-9850H with jemalloc, shows improvement from 1021k ops/sec to 1067k (average of 3 runs).
some 4.5% improvement.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 46393f9819)
(cherry picked from commit b12eeccddd9318a5d97a5aee2dad88999dfad53f)
in Redis 7.0 this fix covers KEYS as well, but in 6.2 and 6.0 it doesn't,
this is because in 7.0 there's a mechanism to avoid sending partial replies
to the client, and in older releases there isn't, and without it there's a
risk that the client would be able to read what looks like a complete KEYS
command.
Authenticated users issuing specially crafted SETRANGE and SORT(_RO)
commands can trigger an integer overflow, resulting with Redis attempting
to allocate impossible amounts of memory and abort with an OOM panic.
Related to the hang reported in #11671
Currently, redis can disconnect a client due to reaching output buffer limit,
it'll also avoid feeding that output buffer with more data, but it will keep
running the loop in the command (despite the client already being marked for
disconnection)
This PR is an attempt to mitigate the problem, specifically for commands that
are easy to abuse, specifically: KEYS, HRANDFIELD, SRANDMEMBER, ZRANDMEMBER.
The RAND family of commands can take a negative COUNT argument (which is not
bound to the number of elements in the key), so it's enough to create a key
with one field, and then these commands can be used to hang redis.
For KEYS the caller can use the existing keyspace in redis (if big enough).
Before this commit, TLS tests on Ubuntu 22.04 would fail as dropped
connections result with an ECONNABORTED error thrown instead of an empty
read.
(cherry picked from commit 69d5576832)
This solves several problems in a more elegant way:
* No need to explicitly use `-lc` on x86_64 when building with `-m32`.
* Avoids issues with undefined floating point emulation funcs on ARM.
(cherry picked from commit f26e90be0c)
* Fix test modules linking on macOS 11.x.
* Use macOS 10.x for FreeBSD VM as VirtualBox is not yet supported on
11.
(cherry picked from commit 6d5a911707)
This test sets the master ping interval to 1 hour, in order to avoid
pings in the replicatoin stream incrementing the replication offset,
however, it didn't increase the repl-timeout so on slow machines
where the test took more than 60 seconds, the replicas would drop
and reconnect.
```
*** [err]: PSYNC2: Partial resync after restart using RDB aux fields in tests/integration/psync2.tcl
Replica didn't partial sync
```
The test would detect 4 additional partial syncs where it expects
only one.
(cherry picked from commit b0250b4508)
In moduleFireServerEvent we change the real client DB to 0 on freeClient in case the event is REDISMODULE_EVENT_CLIENT_CHANGE.
It results in a crash if the client is blocked on a key on other than DB 0.
The DB change is not necessary even for module-client, as we set its DB to 0 on either createClient or moduleReleaseTempClient.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit e4eb18b303)
Fix a few issues with the recent #11463
* use exitFromChild instead of exit
* test should ignore defunct process since that's what we expect to
happen for thees child processes when the parent dies.
* fix typo
Co-authored-by: Binbin <binloveplay1314@qq.com>
(cherry picked from commit 4c54528f0f)
During a diskless sync, if the master main process crashes, the child would
have hung in `write`. This fix closes the read fd on the child side, so that if the
parent crashes, the child will get a write error and exit.
This change also fixes disk-based replication, BGSAVE and AOFRW.
In that case the child wouldn't have been hang, it would have just kept
running until done which may be pointless.
There is a certain degree of risk here. in case there's a BGSAVE child that could
maybe succeed and the parent dies for some reason, the old code would have let
the child keep running and maybe succeed and avoid data loss.
On the other hand, if the parent is restarted, it would have loaded an old rdb file
(or none), and then the child could reach the end and rename the rdb file (data
conflicting with what the parent has), or also have a race with another BGSAVE
child that the new parent started.
Note that i removed a comment saying a write error will be ignored in the child
and handled by the parent (this comment was very old and i don't think relevant).
(cherry picked from commit ccaef5c923)
When FLUSHDB / FLUSHALL / SWAPDB is inside MULTI / EXEC, the
client side tracking invalidation message was interleaved with transaction response.
(cherry picked from commit 6f0a27e38e)
Fix#11030, use lua_rawget to avoid triggering metatables.
#11030 shows how return `_G` from the Lua script (either function or eval), cause the
Lua interpreter to Panic and the Redis processes to exit with error code 1.
Though return `_G` only panic on Redis 7 and 6.2.7, the underline issue exists on older
versions as well (6.0 and 6.2). The underline issue is returning a table with a metatable
such that the metatable raises an error.
The following example demonstrate the issue:
```
127.0.0.1:6379> eval "local a = {}; setmetatable(a,{__index=function() foo() end}) return a" 0
Error: Server closed the connection
```
```
PANIC: unprotected error in call to Lua API (user_script:1: Script attempted to access nonexistent global variable 'foo')
```
The Lua panic happened because when returning the result to the client, Redis needs to
introspect the returning table and transform the table into a resp. In order to scan the table,
Redis uses `lua_gettable` api which might trigger the metatable (if exists) and might raise an error.
This code is not running inside `pcall` (Lua protected call), so raising an error causes the
Lua to panic and exit. Notice that this is not a crash, its a Lua panic that exit with error code 1.
Returning `_G` panics on Redis 7 and 6.2.7 because on those versions `_G` has a metatable
that raises error when trying to fetch a none existing key.
### Solution
Instead of using `lua_gettable` that might raise error and cause the issue, use `lua_rawget`
that simply return the value from the table without triggering any metatable logic.
This is promised not to raise and error.
The downside of this solution is that it might be considered as breaking change, if someone
rely on metatable in the returned value. An alternative solution is to wrap this entire logic
with `pcall` (Lua protected call), this alternative require a much bigger refactoring.
### Back Porting
The same fix will work on older versions as well (6.2, 6.0). Notice that on those version,
the issue can cause Redis to crash if inside the metatable logic there is an attempt to accesses
Redis (`redis.call`). On 7.0, there is not crash and the `redis.call` is executed as if it was done
from inside the script itself.
### Tests
Tests was added the verify the fix
(cherry picked from commit 020e046b42)
when we know the size of the zset we're gonna store in advance,
we can check if it's greater than the listpack encoding threshold,
in which case we can create a skiplist from the get go, and avoid
converting the listpack to skiplist later after it was already populated.
(cherry picked from commit 2189100383)
When `zrangestore` is called container destination object is created.
Before this PR we used to create a listpack based object even if `zset-max-ziplist-entries`
or equivalent`zset-max-listpack-entries` was set to 0.
This triggered immediate conversion of the listpack into a skiplist in `zrangestore`, which hits
an assertion resulting in an engine crash.
Added a TCL test that reproduces this issue.
(cherry picked from commit 6461f09f43)
Before #9497, before redis-server was shut down, we did not manually shut down all the clients,
which would have prevented valgrind from detecting a memory leak in the client's argc.
(cherry picked from commit 1376d83363)
Consider the following example:
1. geoadd k1 -0.15307903289794921875 85 n1 0.3515625 85.00019260486917005437 n2.
2. geodist k1 n1 n2 returns "4891.9380"
3. but GEORADIUSBYMEMBER k1 n1 4891.94 m only returns n1.
n2 is in the boundingbox but out of search areas.So we let search areas contain boundingbox to get n2.
Co-authored-by: Binbin <binloveplay1314@qq.com>
(cherry picked from commit b2d393b990)
This PR handles several aspects
1. Calls to RM_ReplyWithError from thread safe contexts don't violate thread safety.
2. Errors returning from RM_Call to the module aren't counted in the statistics (they
might be handled silently by the module)
3. When a module propagates a reply it got from RM_Call to it's client, then the error
statistics are counted.
This is done by:
1. When appending an error reply to the output buffer, we avoid updating the global
error statistics, instead we cache that error in a deferred list in the client struct.
2. When creating a RedisModuleCallReply object, the deferred error list is moved from
the client into that object.
3. when a module calls RM_ReplyWithCallReply we copy the deferred replies to the dest
client (if that's a real client, then that's when the error statistics are updated to the server)
Note about RM_ReplyWithCallReply: if the original reply had an array with errors, and the module
replied with just a portion of the original reply, and not the entire reply, the errors are currently not
propagated and the errors stats will not get propagated.
Fix#10180
(cherry picked from commit b099889a3a)
It used to return `$-1` in RESP2, now we will return `*-1`.
This is a bug in redis 6.2 when COUNT was added, the `COUNT`
option was introduced in #8179. Fix#10089.
the documentation of [LPOP](https://redis.io/commands/lpop) says
```
When called without the count argument:
Bulk string reply: the value of the first element, or nil when key does not exist.
When called with the count argument:
Array reply: list of popped elements, or nil when key does not exist.
```
(cherry picked from commit 39feee8e3a)
Fix#9410
Crucial for the ms and sequence deltas, but I changed all
calls, just in case (e.g. "flags")
Before this commit:
`ms_delta` and `seq_delta` could have overflown, causing `currid` to be wrong,
which in turn would cause `streamTrim` to trim the entire rax node (see new test)
(cherry picked from commit 7cd6a64d2f)
This commit 0f8b634cd (CVE-2021-32626 released in 6.2.6, 6.0.16, 5.0.14)
fixes an invalid memory write issue by using `lua_checkstack` API to make
sure the Lua stack is not overflow. This fix was added on 3 places:
1. `luaReplyToRedisReply`
2. `ldbRedis`
3. `redisProtocolToLuaType`
On the first 2 functions, `lua_checkstack` is handled gracefully while the
last is handled with an assert and a statement that this situation can
not happened (only with misbehave module):
> the Redis reply might be deep enough to explode the LUA stack (notice
that currently there is no such command in Redis that returns such a nested
reply, but modules might do it)
The issue that was discovered is that user arguments is also considered part
of the stack, and so the following script (for example) make the assertion reachable:
```
local a = {}
for i=1,7999 do
a[i] = 1
end
return redis.call("lpush", "l", unpack(a))
```
This is a regression because such a script would have worked before and now
its crashing Redis. The solution is to clear the function arguments from the Lua
stack which makes the original assumption true and the assertion unreachable.
(cherry picked from commit 6b0b04f1b2)
In #8287, some overflow checks have been added. But when
`when *= 1000` overflows, it will become a positive number.
And the check not able to catch it. The key will be added with
a short expiration time and will deleted a few seconds later.
In #9601, will check the overflow after `*=` and return an
error first, and avoiding this situation.
In this commit, added some tests to cover those code paths.
Found it in #9825, and close it.
(cherry picked from commit 9273d09dd4)
If the last bytes in ziplist are corrupt and we decode from tail to head,
we may reach slightly outside the ziplist.
(cherry picked from commit a3a014294f)
Introduced in #8179, this fixes the command's replies in the 0 count edge case.
[BREAKING] changes the reply type when count is 0 to an empty array (instead of nil)
Moves LPOP ... 0 fast exit path after type check to reply with WRONGTYPE
(cherry picked from commit 06dd202a05)
Following #9483 the daily CI exposed a few problems.
* The cluster creation code (uses redis-cli) is complicated to test with TLS enabled.
for now i'm just skipping them since the tests we run there don't really need that kind of coverage
* cluster port binding failures
note that `find_available_port` already looks for a free cluster port
but the code in `wait_server_started` couldn't detect the failure of binding
(the text it greps for wasn't found in the log)
(cherry picked from commit 7d6744c739)
Prevent clients from being blocked forever in cluster when they block with their own module command
and the hash slot is migrated to another master at the same time.
These will get a redirection message when unblocked.
Also, release clients blocked on module commands when cluster is down (same as other blocked clients)
This commit adds basic tests for the main (non-cluster) redis test infra that test the cluster.
This was done because the cluster test infra can't handle some common test features,
but most importantly we only build the test modules with the non-cluster test suite.
note that rather than really supporting cluster operations by the test infra, it was added (as dup code)
in two files, one for module tests and one for non-modules tests, maybe in the future we'll refactor that.
Co-authored-by: Oran Agra <oran@redislabs.com>
(cherry picked from commit 4962c5526d)
Tracking invalidation messages were sometimes sent in inconsistent order,
before the command's reply rather than after.
In addition to that, they were sometimes embedded inside other commands
responses, like MULTI-EXEC and MGET.
(cherry picked from commit fd135f3e2d)
* Add keyname tags to avoid CROSSSLOT errors in external server CI
* Use new wait_for_blocked_clients_count in pause.tcl
(cherry picked from commit 5dddf496ce)
The allow list is done by setting a metatable on the global table before initializing
any library. The metatable set the `__newindex` field to a function that check
the allow list before adding the field to the table. Fields which is not on the
allow list are simply ignored.
After initialization phase is done we protect the global table and each table
that might be reachable from the global table. For each table we also protect
the table metatable if exists.
Use the new `lua_enablereadonlytable` Lua API to protect the global tables of
evals scripts. The implemetation is easy, we simply call `lua_enablereadonlytable`
on the global table to turn it into a readonly table.
There was no check min-slave-* config when evaluating Lua script.
Add check enough good slaves for write command when evaluating scripts.
Co-authored-by: Phuc. Vo Trong <phucvt@vng.com.vn>
The execution of the RPOPLPUSH command by the fuzzer created junk keys,
that were later being selected by RANDOMKEY and modified.
This also meant that lists were statistically tested more than other
files.
Fix the fuzzer not to pass junk key names to RPOPLPUSH, and add a check
that detects that new keys are not added by the fuzzer to detect future
similar issues.
(cherry picked from commit 3f3f678a47)
This was recently broken in #9321 when we validated stream IDs to be
integers but did that after to the stepping next record instead of before.
(cherry picked from commit 5a4ab7c7d2)
