chore: rename CLI argument --tracing-otlp-level to --tracing-otlp.filter (#19061)

Co-authored-by: Claude <noreply@anthropic.com>

docs/vocs/docs/pages/cli/reth.mdx

@@ -124,10 +124,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/config.mdx

@@ -110,10 +110,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db.mdx

@@ -175,10 +175,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/checksum.mdx

@@ -127,10 +127,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/clear.mdx

@@ -119,10 +119,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/clear/mdbx.mdx

@@ -118,10 +118,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/clear/static-file.mdx

@@ -121,10 +121,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/diff.mdx

@@ -154,10 +154,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/drop.mdx

@@ -117,10 +117,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/get.mdx

@@ -119,10 +119,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/get/mdbx.mdx

@@ -127,10 +127,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/get/static-file.mdx

@@ -127,10 +127,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/list.mdx

@@ -160,10 +160,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/path.mdx

@@ -114,10 +114,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/repair-trie.mdx

@@ -117,10 +117,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/stats.mdx

@@ -127,10 +127,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/db/version.mdx

@@ -114,10 +114,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/download.mdx

@@ -172,10 +172,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/dump-genesis.mdx

@@ -113,10 +113,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/export-era.mdx

@@ -178,10 +178,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/import-era.mdx

@@ -173,10 +173,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/import.mdx

@@ -174,10 +174,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/init-state.mdx

@@ -197,10 +197,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/init.mdx

@@ -162,10 +162,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/node.mdx

@@ -1004,10 +1004,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/p2p.mdx

@@ -111,10 +111,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/p2p/body.mdx

@@ -331,10 +331,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/p2p/bootnode.mdx

@@ -122,10 +122,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/p2p/header.mdx

@@ -331,10 +331,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/p2p/rlpx.mdx

@@ -108,10 +108,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/p2p/rlpx/ping.mdx

@@ -108,10 +108,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/prune.mdx

@@ -162,10 +162,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/re-execute.mdx

@@ -175,10 +175,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage.mdx

@@ -111,10 +111,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/drop.mdx

@@ -176,10 +176,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/dump.mdx

@@ -169,10 +169,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/dump/account-hashing.mdx

@@ -126,10 +126,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/dump/execution.mdx

@@ -126,10 +126,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/dump/merkle.mdx

@@ -126,10 +126,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/dump/storage-hashing.mdx

@@ -126,10 +126,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/run.mdx

@@ -397,10 +397,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/unwind.mdx

@@ -170,10 +170,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/unwind/num-blocks.mdx

@@ -118,10 +118,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.
 

docs/vocs/docs/pages/cli/reth/stage/unwind/to-block.mdx

@@ -118,10 +118,10 @@ Tracing:
 
           [env: OTEL_EXPORTER_OTLP_TRACES_ENDPOINT=]
 
-      --tracing-otlp-level <FILTER>
+      --tracing-otlp.filter <FILTER>
           Set a filter directive for the OTLP tracer. This controls the verbosity of spans and events sent to the OTLP endpoint. It follows the same syntax as the `RUST_LOG` environment variable.
 
-          Example: --tracing-otlp-level=info,reth=debug,hyper_util=off
+          Example: --tracing-otlp.filter=info,reth=debug,hyper_util=off
 
           Defaults to TRACE if not specified.