Update version to v1.4.163 and commit

Bump golang.org/x/net from 0.35.0 to 0.36.0 in the go_modules group across 1 directory

Pattern_Descriptions/pattern_extracts.json

@@ -122,7 +122,7 @@
     },
     {
       "patternName": "analyze_threat_report_trends",
-      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou are a super-intelligent cybersecurity expert. You specialize in extracting the surprising, insightful, and interesting information from cybersecurity threat reports.\n\nTake a step back and think step-by-step about how to achieve the best possible results by following the steps below.\n\n# STEPS\n\n- Read the entire threat report from an expert perspective, thinking deeply about what's new, interesting, and surprising in the report.\n\n- Extract up to 50 of the most surprising, insightful, and/or interesting trends from the input in a section called TRENDS:. If there are less than 50 then collect all of them. Make sure you extract at least 20.\n\n# OUTPUT INSTRUCTIONS\n\n- Only output Markdown.\n- Do not output the markdown code syntax, only the content.\n- Do not use bold or italics formatting in the markdown output.\n- Extract at least 20 TRENDS from the content.\n- Do not give warnings or notes; only output the requested sections.\n- You use bulleted lists for output, not numbered lists.\n- Do not repeat ideas, quotes, facts, or resources.\n- Do not start items with the same opening words.\n- Ensure you follow ALL these instructions when creating your output.\n\n# INPUT"
+      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou are a super-intelligent cybersecurity expert. You specialize in extracting the surprising, insightful, and interesting information from cybersecurity threat reports.\n\nTake a step back and think step-by-step about how to achieve the best possible results by following the steps below.\n\n# STEPS\n\n- Read the entire threat report from an expert perspective, thinking deeply about what's new, interesting, and surprising in the report.\n\n- Extract up to 50 of the most surprising, insightful, and/or interesting trends from the input in a section called TRENDS:. If there are less than 50 then collect all of them. Make sure you extract at least 20.\n\n# OUTPUT INSTRUCTIONS\n\n- Only output Markdown.\n- Do not output the markdown code syntax, only the content.\n- Do not use bold or italics formatting in the markdown output.\n- Extract at least 20 TRENDS from the content.\n- Do not give warnings or notes; only output the requested sections.\n- You use bulleted lists for output, not numbered lists.\n- Do not repeat trends.\n- Do not start items with the same opening words.\n- Ensure you follow ALL these instructions when creating your output.\n\n# INPUT"
     },
     {
       "patternName": "answer_interview_question",
@@ -402,7 +402,7 @@
     },
     {
       "patternName": "extract_business_ideas",
-      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou are a business idea extraction assistant. You are extremely interested in business ideas that could revolutionize or just overhaul existing or new industries.\n\nTake a deep breath and think step by step about how to achieve the best result possible as defined in the steps below. You have a lot of freedom to make this work well.\n\n## OUTPUT SECTIONS\n\n1. You extract all the top business ideas from the content. It might be a few or it might be up to 40 in a section called EXTRACTED_IDEAS\n\n2. Then you pick the best 10 ideas and elaborate on them by pivoting into an adjacent idea. This will be ELABORATED_IDEAS. They should each be unique and have an interesting differentiator.\n\n## OUTPUT INSTRUCTIONS\n\n1. You only output Markdown.\n2. Do not give warnings or notes; only output the requested sections.\n3. You use numbered lists, not bullets.\n4. Do not repeat ideas, quotes, facts, or resources.\n5. Do not start items in the lists with the same opening words.\n\n# INPUT:\n\nINPUT:"
+      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou are a business idea extraction assistant. You are extremely interested in business ideas that could revolutionize or just overhaul existing or new industries.\n\nTake a deep breath and think step by step about how to achieve the best result possible as defined in the steps below. You have a lot of freedom to make this work well.\n\n## OUTPUT SECTIONS\n\n1. You extract all the top business ideas from the content. It might be a few or it might be up to 40 in a section called EXTRACTED_IDEAS\n\n2. Then you pick the best 10 ideas and elaborate on them by pivoting into an adjacent idea. This will be ELABORATED_IDEAS. They should each be unique and have an interesting differentiator.\n\n## OUTPUT INSTRUCTIONS\n\n1. You only output Markdown.\n2. Do not give warnings or notes; only output the requested sections.\n3. You use numbered lists, not bullets.\n4. Do not repeat ideas.\n5. Do not start items in the lists with the same opening words.\n\n# INPUT:\n\nINPUT:"
     },
     {
       "patternName": "extract_controversial_ideas",
@@ -438,7 +438,7 @@
     },
     {
       "patternName": "extract_jokes",
-      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou extract jokes from text content. You are interested only in jokes.\n\nYou create bullet points that capture the joke and punchline.\n\n# OUTPUT INSTRUCTIONS\n\n- Only output Markdown.\n\n- Only extract jokes.\n\n- Each bullet should should have the joke followed by punchline on the next line.\n\n- Do not give warnings or notes; only output the requested sections.\n\n- You use bulleted lists for output, not numbered lists.\n\n- Do not repeat jokes, quotes, facts, or resources.\n\n- Ensure you follow ALL these instructions when creating your output.\n\n\n# INPUT\n"
+      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou extract jokes from text content. You are interested only in jokes.\n\nYou create bullet points that capture the joke and punchline.\n\n# OUTPUT INSTRUCTIONS\n\n- Only output Markdown.\n\n- Only extract jokes.\n\n- Each bullet should should have the joke followed by punchline on the next line.\n\n- Do not give warnings or notes; only output the requested sections.\n\n- You use bulleted lists for output, not numbered lists.\n\n- Do not repeat jokes.\n\n- Ensure you follow ALL these instructions when creating your output.\n\n\n# INPUT\n"
     },
     {
       "patternName": "extract_latest_video",
@@ -446,7 +446,7 @@
     },
     {
       "patternName": "extract_main_idea",
-      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou extract the primary and/or most surprising, insightful, and interesting idea from any input.\n\nTake a step back and think step-by-step about how to achieve the best possible results by following the steps below.\n\n# STEPS\n\n- Fully digest the content provided.\n\n- Extract the most important idea from the content.\n\n- In a section called MAIN IDEA, write a 15-word sentence that captures the main idea.\n\n- In a section called MAIN RECOMMENDATION, write a 15-word sentence that captures what's recommended for people to do based on the idea.\n\n# OUTPUT INSTRUCTIONS\n\n- Only output Markdown.\n- Do not give warnings or notes; only output the requested sections.\n- Do not repeat ideas, quotes, facts, or resources.\n- Do not start items with the same opening words.\n- Ensure you follow ALL these instructions when creating your output.\n\n# INPUT"
+      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou extract the primary and/or most surprising, insightful, and interesting idea from any input.\n\nTake a step back and think step-by-step about how to achieve the best possible results by following the steps below.\n\n# STEPS\n\n- Fully digest the content provided.\n\n- Extract the most important idea from the content.\n\n- In a section called MAIN IDEA, write a 15-word sentence that captures the main idea.\n\n- In a section called MAIN RECOMMENDATION, write a 15-word sentence that captures what's recommended for people to do based on the idea.\n\n# OUTPUT INSTRUCTIONS\n\n- Only output Markdown.\n- Do not give warnings or notes; only output the requested sections.\n- Do not start items with the same opening words.\n- Ensure you follow ALL these instructions when creating your output.\n\n# INPUT"
     },
     {
       "patternName": "extract_most_redeeming_thing",
@@ -474,7 +474,7 @@
     },
     {
       "patternName": "extract_product_features",
-      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou extract the list of product features from the input.\n\nTake a step back and think step-by-step about how to achieve the best possible results by following the steps below.\n\n# STEPS\n\n- Consume the whole input as a whole and think about the type of announcement or content it is.\n\n- Figure out which parts were talking about features of a product or service.\n\n- Output the list of features as a bulleted list of 16 words per bullet.\n\n# OUTPUT INSTRUCTIONS\n\n- Only output Markdown.\n\n- Do not give warnings or notes; only output the requested sections.\n\n- You use bulleted lists for output, not numbered lists.\n\n- Do not repeat ideas, quotes, facts, or resources.\n\n- Do not start items with the same opening words."
+      "pattern_extract": "# IDENTITY and PURPOSE\n\nYou extract the list of product features from the input.\n\nTake a step back and think step-by-step about how to achieve the best possible results by following the steps below.\n\n# STEPS\n\n- Consume the whole input as a whole and think about the type of announcement or content it is.\n\n- Figure out which parts were talking about features of a product or service.\n\n- Output the list of features as a bulleted list of 16 words per bullet.\n\n# OUTPUT INSTRUCTIONS\n\n- Only output Markdown.\n\n- Do not give warnings or notes; only output the requested sections.\n\n- You use bulleted lists for output, not numbered lists.\n\n- Do not repeat features.\n\n- Do not start items with the same opening words."
     },
     {
       "patternName": "extract_questions",

README.md

@@ -34,13 +34,18 @@
 - [`fabric`](#fabric)
   - [Navigation](#navigation)
   - [Updates](#updates)
-  - [Intro videos](#intro-videos)
   - [What and why](#what-and-why)
+  - [Intro videos](#intro-videos)
   - [Philosophy](#philosophy)
     - [Breaking problems into components](#breaking-problems-into-components)
     - [Too many prompts](#too-many-prompts)
   - [Installation](#installation)
     - [Get Latest Release Binaries](#get-latest-release-binaries)
+      - [Windows:](#windows)
+      - [MacOS (arm64):](#macos-arm64)
+      - [MacOS (amd64):](#macos-amd64)
+      - [Linux (amd64):](#linux-amd64)
+      - [Linux (arm64):](#linux-arm64)
     - [From Source](#from-source)
     - [Environment Variables](#environment-variables)
     - [Setup](#setup)
@@ -52,12 +57,15 @@
   - [Our approach to prompting](#our-approach-to-prompting)
   - [Examples](#examples)
   - [Just use the Patterns](#just-use-the-patterns)
+    - [Prompt Strategies](#prompt-strategies)
   - [Custom Patterns](#custom-patterns)
   - [Helper Apps](#helper-apps)
     - [`to_pdf`](#to_pdf)
     - [`to_pdf` Installation](#to_pdf-installation)
   - [pbpaste](#pbpaste)
-  - [Web Interface](#Web_Interface)
+  - [Web Interface](#web-interface)
+    - [Installing](#installing)
+    - [Streamlit UI](#streamlit-ui)
   - [Meta](#meta)
     - [Primary contributors](#primary-contributors)
 
@@ -341,11 +349,6 @@ for pattern_file in ~/.config/fabric/patterns/*; do
     }
     "
 done
-
-yt() {
-    local video_link="$1"
-    fabric -y "$video_link" --transcript
-}
 ```
 
 This will allow you to use the patterns as aliases like in the above for example `summarize` instead of `fabric --pattern summarize --stream`, however if you pass in an extra argument like this `summarize "my_article_title"` your output will be saved in the destination that you set in `obsidian_base="/path/to/obsidian"` in the following format `YYYY-MM-DD-my_article_title.md` where the date gets autogenerated for you.
@@ -391,48 +394,60 @@ Usage:
   fabric [OPTIONS]
 
 Application Options:
-  -p, --pattern=             Choose a pattern from the available patterns
-  -v, --variable=            Values for pattern variables, e.g. -v=#role:expert -v=#points:30"
-  -C, --context=             Choose a context from the available contexts
-      --session=             Choose a session from the available sessions
-  -a, --attachment=          Attachment path or URL (e.g. for OpenAI image recognition messages)
-  -S, --setup                Run setup for all reconfigurable parts of fabric
-  -t, --temperature=         Set temperature (default: 0.7)
-  -T, --topp=                Set top P (default: 0.9)
-  -s, --stream               Stream
-  -P, --presencepenalty=     Set presence penalty (default: 0.0)
-  -r, --raw                  Use the defaults of the model without sending chat options (like temperature etc.) and use the user role instead of the system role for patterns.
-  -F, --frequencypenalty=    Set frequency penalty (default: 0.0)
-  -l, --listpatterns         List all patterns
-  -L, --listmodels           List all available models
-  -x, --listcontexts         List all contexts
-  -X, --listsessions         List all sessions
-  -U, --updatepatterns       Update patterns
-  -c, --copy                 Copy to clipboard
-  -m, --model=               Choose model
-  -o, --output=              Output to file
-      --output-session       Output the entire session (also a temporary one) to the output file
-  -n, --latest=              Number of latest patterns to list (default: 0)
-  -d, --changeDefaultModel   Change default model
-  -y, --youtube=             YouTube video "URL" to grab transcript, comments from it and send to chat
-      --transcript           Grab transcript from YouTube video and send to chat (it used per default).
-      --comments             Grab comments from YouTube video and send to chat
-      --metadata             Grab metadata from YouTube video and send to chat
-  -g, --language=            Specify the Language Code for the chat, e.g. -g=en -g=zh
-  -u, --scrape_url=          Scrape website URL to markdown using Jina AI
-  -q, --scrape_question=     Search question using Jina AI
-  -e, --seed=                Seed to be used for LMM generation
-  -w, --wipecontext=         Wipe context
-  -W, --wipesession=         Wipe session
-      --printcontext=        Print context
-      --printsession=        Print session
-      --readability          Convert HTML input into a clean, readable view
-      --serve                Initiate the API server
-      --dry-run              Show what would be sent to the model without actually sending it
-      --version              Print current version
+  -p, --pattern=                    Choose a pattern from the available patterns
+  -v, --variable=                   Values for pattern variables, e.g. -v=#role:expert -v=#points:30
+  -C, --context=                    Choose a context from the available contexts
+      --session=                    Choose a session from the available sessions
+  -a, --attachment=                 Attachment path or URL (e.g. for OpenAI image recognition messages)
+  -S, --setup                       Run setup for all reconfigurable parts of fabric
+  -t, --temperature=                Set temperature (default: 0.7)
+  -T, --topp=                       Set top P (default: 0.9)
+  -s, --stream                      Stream
+  -P, --presencepenalty=            Set presence penalty (default: 0.0)
+  -r, --raw                         Use the defaults of the model without sending chat options (like temperature etc.) and use the user role instead of the system role for patterns.
+  -F, --frequencypenalty=           Set frequency penalty (default: 0.0)
+  -l, --listpatterns                List all patterns
+  -L, --listmodels                  List all available models
+  -x, --listcontexts                List all contexts
+  -X, --listsessions                List all sessions
+  -U, --updatepatterns              Update patterns
+  -c, --copy                        Copy to clipboard
+  -m, --model=                      Choose model
+      --modelContextLength=         Model context length (only affects ollama)
+  -o, --output=                     Output to file
+      --output-session              Output the entire session (also a temporary one) to the output file
+  -n, --latest=                     Number of latest patterns to list (default: 0)
+  -d, --changeDefaultModel          Change default model
+  -y, --youtube=                    YouTube video or play list "URL" to grab transcript, comments from it and send to chat or print it put to the console and store it in the output file
+      --playlist                    Prefer playlist over video if both ids are present in the URL
+      --transcript                  Grab transcript from YouTube video and send to chat (it is used per default).
+      --transcript-with-timestamps  Grab transcript from YouTube video with timestamps and send to chat
+      --comments                    Grab comments from YouTube video and send to chat
+      --metadata                    Output video metadata
+  -g, --language=                   Specify the Language Code for the chat, e.g. -g=en -g=zh
+  -u, --scrape_url=                 Scrape website URL to markdown using Jina AI
+  -q, --scrape_question=            Search question using Jina AI
+  -e, --seed=                       Seed to be used for LMM generation
+  -w, --wipecontext=                Wipe context
+  -W, --wipesession=                Wipe session
+      --printcontext=               Print context
+      --printsession=               Print session
+      --readability                 Convert HTML input into a clean, readable view
+      --input-has-vars              Apply variables to user input
+      --dry-run                     Show what would be sent to the model without actually sending it
+      --serve                       Serve the Fabric Rest API
+      --serveOllama                 Serve the Fabric Rest API with ollama endpoints
+      --address=                    The address to bind the REST API (default: :8080)
+      --config=                     Path to YAML config file
+      --version                     Print current version
+      --listextensions              List all registered extensions
+      --addextension=               Register a new extension from config file path
+      --rmextension=                Remove a registered extension by name
+      --strategy=                   Choose a strategy from the available strategies
+      --liststrategies              List all strategies
 
 Help Options:
-  -h, --help                 Show this help message
+  -h, --help                        Show this help message
 
 ```
 
@@ -503,6 +518,21 @@ You can use any of the Patterns you see there in any AI application that you hav
 
 The wisdom of crowds for the win.
 
+### Prompt Strategies
+
+Fabric also implements prompt strategies like "Chain of Thought" or "Chain of Draft" which can
+be used in addition to the basic patterns.
+
+See the [Thinking Faster by Writing Less](https://arxiv.org/pdf/2502.18600) paper and
+the [Thought Generation section of Learn Prompting](https://learnprompting.org/docs/advanced/thought_generation/introduction) for examples of prompt strategies.
+
+Each strategy is available as a small `json` file in the [`/strategies`](https://github.com/danielmiessler/fabric/tree/main/strategies) directory.
+
+The prompt modification of the strategy is applied to the system prompt and passed on to the
+LLM in the chat session.
+
+Use `fabric -S` and select the option to install the strategies in your `~/.config/fabric` directory.
+
 ## Custom Patterns
 
 You may want to use Fabric to create your own custom Patterns—but not share them with others. No problem!
@@ -575,16 +605,16 @@ alias pbpaste='xclip -selection clipboard -o'
 
 ## Web Interface
 
-Fabric now includes a built-in web interface that provides a GUI alternative to the command-line interface and an out-of-the-box website for those who want to get started with web development or blogging.  
+Fabric now includes a built-in web interface that provides a GUI alternative to the command-line interface and an out-of-the-box website for those who want to get started with web development or blogging.
 You can use this app as a GUI interface for Fabric, a ready to go blog-site, or a website template for your own projects.
 
 The `web/src/lib/content` directory includes starter `.obsidian/` and `templates/` directories, allowing you to open up the `web/src/lib/content/` directory as an [Obsidian.md](https://obsidian.md) vault. You can place your posts in the posts directory when you're ready to publish.
 
 ### Installing
 
-The GUI can be installed by navigating to the `web` directory and using `npm install`, `pnpm install`, or your favorite package manager. Then simply run the development server to start the app.
+The GUI can be installed by navigating to the `web` directory and using `npm install`, `pnpm install`, or your favorite package manager. Then simply run the development server to start the app.
 
-_You will need to run fabric in a separate terminal with the `fabric --serve` command._
+_You will need to run fabric in a separate terminal with the `fabric --serve` command._
 
 **From the fabric project `web/` directory:**
 
@@ -604,7 +634,10 @@ To run the Streamlit user interface:
 
 ```bash
 # Install required dependencies
-pip install streamlit pandas matplotlib seaborn numpy python-dotenv
+pip install -r requirements.txt
+
+# Or manually install dependencies
+pip install streamlit pandas matplotlib seaborn numpy python-dotenv pyperclip
 
 # Run the Streamlit app
 streamlit run streamlit.py
@@ -617,6 +650,14 @@ The Streamlit UI provides a user-friendly interface for:
 - Creating and editing patterns
 - Analyzing pattern results
 
+#### Clipboard Support
+
+The Streamlit UI supports clipboard operations across different platforms:
+
+- **macOS**: Uses `pbcopy` and `pbpaste` (built-in)
+- **Windows**: Uses `pyperclip` library (install with `pip install pyperclip`)
+- **Linux**: Uses `xclip` (install with `sudo apt-get install xclip` or equivalent for your distro)
+
 ## Meta
 
 > [!NOTE]

cli/cli.go

@@ -73,7 +73,10 @@ func Cli(version string) (err error) {
 	}
 
 	if currentFlags.ChangeDefaultModel {
-		err = registry.Defaults.Setup()
+		if err = registry.Defaults.Setup(); err != nil {
+			return
+		}
+		err = registry.SaveEnvFile()
 		return
 	}
 
@@ -156,6 +159,11 @@ func Cli(version string) (err error) {
 		return
 	}
 
+	if currentFlags.ListStrategies {
+		err = registry.Strategies.ListStrategies()
+		return
+	}
+
 	// if the interactive flag is set, run the interactive function
 	// if currentFlags.Interactive {
 	// 	interactive.Interactive()
@@ -166,7 +174,7 @@ func Cli(version string) (err error) {
 	var messageTools string
 
 	if currentFlags.YouTube != "" {
-		if registry.YouTube.IsConfigured() == false {
+		if !registry.YouTube.IsConfigured() {
 			err = fmt.Errorf("YouTube is not configured, please run the setup procedure")
 			return
 		}
@@ -241,7 +249,7 @@ func Cli(version string) (err error) {
 	}
 
 	var chatter *core.Chatter
-	if chatter, err = registry.GetChatter(currentFlags.Model, currentFlags.ModelContextLength, currentFlags.Stream, currentFlags.DryRun); err != nil {
+	if chatter, err = registry.GetChatter(currentFlags.Model, currentFlags.ModelContextLength, currentFlags.Strategy, currentFlags.Stream, currentFlags.DryRun); err != nil {
 		return
 	}
 

cli/flags.go

@@ -69,6 +69,8 @@ type Flags struct {
 	ListExtensions                  bool              `long:"listextensions" description:"List all registered extensions"`
 	AddExtension                    string            `long:"addextension" description:"Register a new extension from config file path"`
 	RemoveExtension                 string            `long:"rmextension" description:"Remove a registered extension by name"`
+	Strategy                        string            `long:"strategy" description:"Choose a strategy from the available strategies" default:""`
+	ListStrategies                  bool              `long:"liststrategies" description:"List all strategies"`
 }
 
 var debug = false
@@ -267,13 +269,14 @@ func (o *Flags) BuildChatRequest(Meta string) (ret *common.ChatRequest, err erro
 		ContextName:      o.Context,
 		SessionName:      o.Session,
 		PatternName:      o.Pattern,
+		StrategyName:     o.Strategy,
 		PatternVariables: o.PatternVariables,
 		InputHasVars:     o.InputHasVars,
 		Meta:             Meta,
 	}
 
 	var message *goopenai.ChatCompletionMessage
-	if o.Attachments == nil || len(o.Attachments) == 0 {
+	if len(o.Attachments) == 0 {
 		if o.Message != "" {
 			message = &goopenai.ChatCompletionMessage{
 				Role:    goopenai.ChatMessageRoleUser,

common/domain.go

@@ -13,6 +13,7 @@ type ChatRequest struct {
 	Language         string
 	Meta             string
 	InputHasVars     bool
+	StrategyName     string
 }
 
 type ChatOptions struct {

core/chatter.go

@@ -10,6 +10,7 @@ import (
 	"github.com/danielmiessler/fabric/common"
 	"github.com/danielmiessler/fabric/plugins/ai"
 	"github.com/danielmiessler/fabric/plugins/db/fsdb"
+	"github.com/danielmiessler/fabric/plugins/strategy"
 	"github.com/danielmiessler/fabric/plugins/template"
 )
 
@@ -24,6 +25,7 @@ type Chatter struct {
 	model              string
 	modelContextLength int
 	vendor             ai.Vendor
+	strategy           string
 }
 
 func (o *Chatter) Send(request *common.ChatRequest, opts *common.ChatOptions) (session *fsdb.Session, err error) {
@@ -35,6 +37,9 @@ func (o *Chatter) Send(request *common.ChatRequest, opts *common.ChatOptions) (s
 	if len(vendorMessages) == 0 {
 		if session.Name != "" {
 			err = o.db.Sessions.SaveSession(session)
+			if err != nil {
+				return
+			}
 		}
 		err = fmt.Errorf("no messages provided")
 		return
@@ -140,6 +145,19 @@ func (o *Chatter) BuildSession(request *common.ChatRequest, raw bool) (session *
 	}
 
 	systemMessage := strings.TrimSpace(contextContent) + strings.TrimSpace(patternContent)
+
+	// Apply strategy if specified
+	if request.StrategyName != "" {
+		strategy, err := strategy.LoadStrategy(request.StrategyName)
+		if err != nil {
+			return nil, fmt.Errorf("could not load strategy %s: %v", request.StrategyName, err)
+		}
+		if strategy != nil && strategy.Prompt != "" {
+			// prepend the strategy prompt to the system message
+			systemMessage = fmt.Sprintf("%s\n%s", strategy.Prompt, systemMessage)
+		}
+	}
+
 	if request.Language != "" {
 		systemMessage = fmt.Sprintf("%s. Please use the language '%s' for the output.", systemMessage, request.Language)
 	}

core/plugin_registry.go

@@ -8,6 +8,7 @@ import (
 	"strconv"
 
 	"github.com/danielmiessler/fabric/plugins/ai/exolab"
+	"github.com/danielmiessler/fabric/plugins/strategy"
 
 	"github.com/samber/lo"
 
@@ -44,6 +45,7 @@ func NewPluginRegistry(db *fsdb.Db) (ret *PluginRegistry, err error) {
 		YouTube:        youtube.NewYouTube(),
 		Language:       lang.NewLanguage(),
 		Jina:           jina.NewClient(),
+		Strategies:     strategy.NewStrategiesManager(),
 	}
 
 	var homedir string
@@ -86,6 +88,7 @@ type PluginRegistry struct {
 	Language           *lang.Language
 	Jina               *jina.Client
 	TemplateExtensions *template.ExtensionManager
+	Strategies         *strategy.StrategiesManager
 }
 
 func (o *PluginRegistry) SaveEnvFile() (err error) {
@@ -94,6 +97,7 @@ func (o *PluginRegistry) SaveEnvFile() (err error) {
 
 	o.Defaults.Settings.FillEnvFileContent(&envFileContent)
 	o.PatternsLoader.SetupFillEnvFileContent(&envFileContent)
+	o.Strategies.SetupFillEnvFileContent(&envFileContent)
 
 	for _, vendor := range o.VendorManager.Vendors {
 		vendor.SetupFillEnvFileContent(&envFileContent)
@@ -109,7 +113,7 @@ func (o *PluginRegistry) SaveEnvFile() (err error) {
 
 func (o *PluginRegistry) Setup() (err error) {
 	setupQuestion := plugins.NewSetupQuestion("Enter the number of the plugin to setup")
-	groupsPlugins := common.NewGroupsItemsSelector[plugins.Plugin]("Available plugins (please configure all required plugins):",
+	groupsPlugins := common.NewGroupsItemsSelector("Available plugins (please configure all required plugins):",
 		func(plugin plugins.Plugin) string {
 			var configuredLabel string
 			if plugin.IsConfigured() {
@@ -125,7 +129,7 @@ func (o *PluginRegistry) Setup() (err error) {
 			return vendor
 		})...)
 
-	groupsPlugins.AddGroupItems("Tools", o.Defaults, o.PatternsLoader, o.YouTube, o.Language, o.Jina)
+	groupsPlugins.AddGroupItems("Tools", o.Defaults, o.PatternsLoader, o.YouTube, o.Language, o.Jina, o.Strategies)
 
 	for {
 		groupsPlugins.Print()
@@ -206,7 +210,7 @@ func (o *PluginRegistry) Configure() (err error) {
 	return
 }
 
-func (o *PluginRegistry) GetChatter(model string, modelContextLength int, stream bool, dryRun bool) (ret *Chatter, err error) {
+func (o *PluginRegistry) GetChatter(model string, modelContextLength int, strategy string, stream bool, dryRun bool) (ret *Chatter, err error) {
 	ret = &Chatter{
 		db:     o.Db,
 		Stream: stream,
@@ -258,5 +262,6 @@ func (o *PluginRegistry) GetChatter(model string, modelContextLength int, stream
 			model, defaultModel, defaultVendor, errMsg)
 		return
 	}
+	ret.strategy = strategy
 	return
 }

go.mod

@@ -19,7 +19,6 @@ require (
 	github.com/samber/lo v1.49.1
 	github.com/sashabaranov/go-openai v1.38.0
 	github.com/stretchr/testify v1.10.0
-	golang.org/x/term v0.29.0
 	golang.org/x/text v0.22.0
 	google.golang.org/api v0.223.0
 	gopkg.in/yaml.v2 v2.4.0
@@ -91,7 +90,7 @@ require (
 	go.opentelemetry.io/otel/trace v1.34.0 // indirect
 	golang.org/x/arch v0.14.0 // indirect
 	golang.org/x/crypto v0.35.0 // indirect
-	golang.org/x/net v0.35.0 // indirect
+	golang.org/x/net v0.36.0 // indirect
 	golang.org/x/oauth2 v0.27.0 // indirect
 	golang.org/x/sync v0.11.0 // indirect
 	golang.org/x/sys v0.30.0 // indirect

go.sum

@@ -244,8 +244,8 @@ golang.org/x/net v0.15.0/go.mod h1:idbUs1IY1+zTqbi8yxTbhexhEEk5ur9LInksu6HrEpk=
 golang.org/x/net v0.21.0/go.mod h1:bIjVDfnllIU7BJ2DNgfnXvpSvtn8VRwhlsaeUTyUS44=
 golang.org/x/net v0.25.0/go.mod h1:JkAGAh7GEvH74S6FOH42FLoXpXbE/aqXSrIQjXgsiwM=
 golang.org/x/net v0.33.0/go.mod h1:HXLR5J+9DxmrqMwG9qjGCxZ+zKXxBru04zlTvWlWuN4=
-golang.org/x/net v0.35.0 h1:T5GQRQb2y08kTAByq9L4/bz8cipCdA8FbRTXewonqY8=
-golang.org/x/net v0.35.0/go.mod h1:EglIi67kWsHKlRzzVMUD93VMSWGFOMSZgxFjparz1Qk=
+golang.org/x/net v0.36.0 h1:vWF2fRbw4qslQsQzgFqZff+BItCvGFQqKzKIzx1rmoA=
+golang.org/x/net v0.36.0/go.mod h1:bFmbeoIPfrw4sMHNhb4J9f6+tPziuGjq7Jk/38fxi1I=
 golang.org/x/oauth2 v0.27.0 h1:da9Vo7/tDv5RH/7nZDz1eMGS/q1Vv1N/7FCrBhI9I3M=
 golang.org/x/oauth2 v0.27.0/go.mod h1:onh5ek6nERTohokkhCD/y2cV4Do3fxFHFuAejCkRWT8=
 golang.org/x/sync v0.0.0-20190423024810-112230192c58/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=

nix/pkgs/fabric/gomod2nix.toml

@@ -242,8 +242,8 @@ schema = 3
     version = "v0.35.0"
     hash = "sha256-XT1VU0+m1nZbhrMYXN2+eaKBlScfiT4bCBgXu4mfa1Q="
   [mod."golang.org/x/net"]
-    version = "v0.35.0"
-    hash = "sha256-kCLhhvzHQCvUqC8kGhgMbVLUROG4ZeZNVGOVVv6tSAE="
+    version = "v0.36.0"
+    hash = "sha256-2c9AvnizBMCaqKPzwF2IMlRfvjRNDFmxIYhrgZjhOm0="
   [mod."golang.org/x/oauth2"]
     version = "v0.27.0"
     hash = "sha256-TBKV2c/m0SgPqrJSE0ltJXfImrYPafNuziLN25jgsYY="
@@ -253,9 +253,6 @@ schema = 3
   [mod."golang.org/x/sys"]
     version = "v0.30.0"
     hash = "sha256-BuhWtwDkciVioc03rxty6G2vcZVnPX85lI7tgQOFVP8="
-  [mod."golang.org/x/term"]
-    version = "v0.29.0"
-    hash = "sha256-aIupP/iNJKzHPUt0F7SaXc3u17h8plEPyQeypO7ilW8="
   [mod."golang.org/x/text"]
     version = "v0.22.0"
     hash = "sha256-kUwLNFk9K/YuWmO5/u2IshrmhT2CCuk+mAShSlTTeZo="

nix/pkgs/fabric/version.nix

@@ -1 +1 @@
-"1.4.156"
+"1.4.163"

patterns/analyze_malware/system.md

@@ -24,7 +24,7 @@ Extract at least basic information about the malware.
 Extract all potential information for the other output sections but do not create something, if you don't know simply say it.
 Do not give warnings or notes; only output the requested sections.
 You use bulleted lists for output, not numbered lists.
-Do not repeat ideas, facts, or resources.
+Do not repeat references.
 Do not start items with the same opening words.
 Ensure you follow ALL these instructions when creating your output.
 

patterns/analyze_threat_report/system.md

@@ -29,7 +29,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 - Extract at least 10 items for the other output sections.
 - Do not give warnings or notes; only output the requested sections.
 - You use bulleted lists for output, not numbered lists.
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat trends, statistics, quotes, or references.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.
 

patterns/analyze_threat_report_trends/system.md

@@ -18,7 +18,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 - Extract at least 20 TRENDS from the content.
 - Do not give warnings or notes; only output the requested sections.
 - You use bulleted lists for output, not numbered lists.
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat trends.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.
 

patterns/coding_master/system.md

@@ -44,7 +44,7 @@ Do not give warnings or notes; only output the requested sections.
 
 You use bulleted lists for output, not numbered lists.
 
-Do not repeat ideas, quotes, facts, or resources.
+Do not repeat ideas, habits, facts, or insights.
 
 Do not start items with the same opening words.
 

patterns/create_flash_cards/system.md

@@ -0,0 +1,14 @@
+# IDENTITY 
+
+You are an expert educator AI with a 4,221 IQ. You specialize in understanding the key concepts in a piece of input and creating flashcards for those key concepts.
+
+# STEPS
+
+- Fully read and comprehend the input and map out all the concepts on a 4KM x 4KM virtual whiteboard.
+- Make a list of the key concepts, definitions, terms, etc. that are associated with the input.
+- Create flashcards for each key concept, definition, term, etc. that you have identified.
+- The flashcard should be a question of 8-16 words and an answer of up to 32 words.
+
+# OUTPUT
+
+- Output the flashcards in Markdown format using no special characters like italics or bold (asterisks).

patterns/create_network_threat_landscape/system.md

@@ -27,7 +27,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 - Extract at least 10 items for the other output sections.
 - Do not give warnings or notes; only output the requested sections.
 - You use bulleted lists for output, not numbered lists.
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat insights, trends, or quotes.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.
 

patterns/create_report_finding/system.md

@@ -33,7 +33,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 - Extract at least 10 items for the other output sections.
 - Do not give warnings or notes; only output the requested sections.
 - You use bulleted lists for output, not numbered lists.
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat quotes, or references.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.
 

patterns/extract_article_wisdom/dmiessler/extract_wisdom-1.0.0/system.md

@@ -25,5 +25,5 @@ Take a step back and think step by step about how to achieve the best result pos
 1. You only output Markdown.
 2. Do not give warnings or notes; only output the requested sections.
 3. You use numbered lists, not bullets.
-4. Do not repeat ideas, quotes, facts, or resources.
+4. Do not repeat ideas, quotes, habits, facts, or references.
 5. Do not start items with the same opening words.

patterns/extract_article_wisdom/system.md

@@ -24,7 +24,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 - Extract at least 10 items for the other output sections.
 - Do not give warnings or notes; only output the requested sections.
 - You use bulleted lists for output, not numbered lists.
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat ideas, quotes, facts, or references.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.
 

patterns/extract_business_ideas/system.md

@@ -15,7 +15,7 @@ Take a deep breath and think step by step about how to achieve the best result p
 1. You only output Markdown.
 2. Do not give warnings or notes; only output the requested sections.
 3. You use numbered lists, not bullets.
-4. Do not repeat ideas, quotes, facts, or resources.
+4. Do not repeat ideas.
 5. Do not start items in the lists with the same opening words.
 
 # INPUT:

patterns/extract_ctf_writeup/system.md

@@ -24,7 +24,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat vulnerabilities, or references.
 
 - Do not start items with the same opening words.
 

patterns/extract_insights_dm/system.md

@@ -175,7 +175,7 @@ END OUTPUT EXAMPLE
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat insights.
 
 - Do not start items with the same opening words.
 

patterns/extract_jokes/system.md

@@ -16,11 +16,10 @@ You create bullet points that capture the joke and punchline.
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat jokes, quotes, facts, or resources.
+- Do not repeat jokes.
 
 - Ensure you follow ALL these instructions when creating your output.
 
-
 # INPUT
 
 INPUT:

patterns/extract_main_activities/system.md

@@ -0,0 +1,21 @@
+# IDENTITY
+
+You are an expert activity extracting AI with a 24,221 IQ. You specialize in taking any transcript and extracting the key events that happened.
+
+# STEPS
+
+- Fully understand the input transcript or log.
+ 
+- Extract the key events and map them on a 24KM x 24KM virtual whiteboard.
+ 
+- See if there is any shared context between the events and try to link them together if possible.
+
+# OUTPUT
+
+- Write a 16 word summary sentence of the activity.
+ 
+- Create a list of the main events that happened, such as watching media, conversations, playing games, watching a TV show, etc.
+
+# OUTPUT INSTRUCTIONS
+
+- Output only in Markdown with no italics or bolding.

patterns/extract_main_idea/system.md

@@ -18,7 +18,6 @@ Take a step back and think step-by-step about how to achieve the best possible r
 
 - Only output Markdown.
 - Do not give warnings or notes; only output the requested sections.
-- Do not repeat ideas, quotes, facts, or resources.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.
 

patterns/extract_patterns/system.md

@@ -34,7 +34,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 - Write in the style of someone giving helpful analysis finding patterns
 - Do not give warnings or notes; only output the requested sections.
 - You use bulleted lists for output, not numbered lists.
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat patterns.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.
 

patterns/extract_product_features/dmiessler/extract_wisdom-1.0.0/system.md

@@ -25,5 +25,5 @@ Take a step back and think step by step about how to achieve the best result pos
 1. You only output Markdown.
 2. Do not give warnings or notes; only output the requested sections.
 3. You use numbered lists, not bullets.
-4. Do not repeat ideas, quotes, facts, or resources.
+4. Do not repeat ideas, quotes, habits, facts, or references.
 5. Do not start items with the same opening words.

patterns/extract_product_features/system.md

@@ -20,7 +20,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not features.
 
 - Do not start items with the same opening words.
 

patterns/extract_recipe/system.md

@@ -23,10 +23,10 @@ Take a step back and think step-by-step about how to achieve the best possible r
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
-
 - Do not start items with the same opening words.
 
+- Do not repeat ingredients.
+
 - Stick to the measurements, do not alter it.
 
 - Ensure you follow ALL these instructions when creating your output.

patterns/extract_wisdom/dmiessler/extract_wisdom-1.0.0/system.md

@@ -25,5 +25,5 @@ Take a step back and think step by step about how to achieve the best result pos
 1. You only output Markdown.
 2. Do not give warnings or notes; only output the requested sections.
 3. You use numbered lists, not bullets.
-4. Do not repeat ideas, quotes, facts, or resources.
+4. Do not repeat ideas, quotes, habits, facts, or references.
 5. Do not start items with the same opening words.

patterns/extract_wisdom/system.md

@@ -48,7 +48,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat ideas, insights, quotes, habits, facts, or references.
 
 - Do not start items with the same opening words.
 

patterns/extract_wisdom_agents/system.md

@@ -42,7 +42,7 @@ You are an advanced AI system that coordinates multiple teams of AI agents that
 
 - All GENERALIST output agents should use bullets for their output, and sentences of 15-words.
 
-- Agents should not repeat ideas, quotes, facts, or resources.
+- Agents should not repeat ideas, insights, quotes, habits, facts, or references.
 
 - Agents should not start items with the same opening words.
 

patterns/extract_wisdom_dm/system.md

@@ -82,7 +82,7 @@ Think about the most interesting facts related to the content
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat ideas, insights, quotes, habits, facts, or references.
 
 - Do not start items with the same opening words.
 

patterns/extract_wisdom_nometa/system.md

@@ -44,7 +44,7 @@ You extract surprising, insightful, and interesting information from text conten
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat ideas, insights, quotes, habits, facts, or references.
 
 - Do not start items with the same opening words.
 

patterns/improve_report_finding/system.md

@@ -31,7 +31,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 - Extract at least 10 items for the other output sections.
 - Do not give warnings or notes; only output the requested sections.
 - You use bulleted lists for output, not numbered lists.
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat quotes, or references.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.
 

patterns/raycast/yt

@@ -7,7 +7,7 @@
 
 # Optional parameters:
 # @raycast.icon 🧠
-# @raycast.argument1 { "type": "text", "placeholder": "Input text", "optional": false, "percentEncoded": true}
+# @raycast.argument1 { "type": "text", "placeholder": "Input text", "optional": false, "percentEncoded": false}
 
 # Documentation:
 # @raycast.description Run fabric -y on the input text of a YouTube video to get the transcript from.

patterns/summarize/dmiessler/summarize/system.md

@@ -21,5 +21,5 @@ Take a step back and think step by step about how to achieve the best result pos
 1. You only output Markdown.
 2. Do not give warnings or notes; only output the requested sections.
 3. You use numbered lists, not bullets.
-4. Do not repeat ideas, quotes, facts, or resources.
+4. Do not repeat ideas, or quotes.
 5. Do not start items with the same opening words.

patterns/summarize_debate/system.md

@@ -60,13 +60,10 @@ Find the evidence each party would accept to change their mind.
 
 - Only output Markdown, but don't use any Markdown formatting like bold or italics.
 
-
 - Do not give warnings or notes; only output the requested sections.
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
-
 - Do not start items with the same opening words.
 
 - Ensure you follow ALL these instructions when creating your output.

patterns/transcribe_minutes/system.md

@@ -35,7 +35,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 - Write CHALLENGES as 2-3 sentences.
 - Write NEXT STEPS as 2-3 sentences.
 - Do not give warnings or notes; only output the requested sections.
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat actionables, decisions, or challenges.
 - You use bulleted lists for output, not numbered lists.
 - Do not start items with the same opening words.
 - Ensure you follow ALL these instructions when creating your output.

plugins/strategy/strategy.go

@@ -0,0 +1,231 @@
+package strategy
+
+import (
+	"encoding/json"
+	"fmt"
+	"io/fs"
+	"os"
+	"path/filepath"
+	"sort"
+	"strings"
+
+	"github.com/danielmiessler/fabric/plugins"
+	"github.com/danielmiessler/fabric/plugins/tools/githelper"
+)
+
+const DefaultStrategiesGitRepoUrl = "https://github.com/danielmiessler/fabric.git"
+const DefaultStrategiesGitRepoFolder = "strategies"
+
+func NewStrategiesManager() (sm *StrategiesManager) {
+	label := "Prompt Strategies"
+	strategies, err := LoadAllFiles()
+	if err != nil {
+		strategies = make(map[string]Strategy) // empty map
+	}
+	sm = &StrategiesManager{
+		Strategies: strategies,
+	}
+	sm.PluginBase = &plugins.PluginBase{
+		Name:             label,
+		SetupDescription: "Strategies - Downloads Prompting Strategies (like chain of thought) [required]",
+		EnvNamePrefix:    plugins.BuildEnvVariablePrefix(label),
+		ConfigureCustom:  sm.configure,
+	}
+
+	sm.DefaultGitRepoUrl = sm.AddSetupQuestionCustom("Git Repo Url", true,
+		"Enter the default Git repository URL for the strategies")
+	sm.DefaultGitRepoUrl.Value = DefaultStrategiesGitRepoUrl
+
+	sm.DefaultFolder = sm.AddSetupQuestionCustom("Git Repo Strategies Folder", true,
+		"Enter the default folder in the Git repository where strategies are stored")
+	sm.DefaultFolder.Value = DefaultStrategiesGitRepoFolder
+
+	return
+}
+
+type StrategiesManager struct {
+	*plugins.PluginBase
+	Strategies map[string]Strategy
+
+	DefaultGitRepoUrl *plugins.SetupQuestion
+	DefaultFolder     *plugins.SetupQuestion
+}
+
+type Strategy struct {
+	Name        string `json:"name"`
+	Description string `json:"description"`
+	Prompt      string `json:"prompt"`
+}
+
+func LoadAllFiles() (strategies map[string]Strategy, err error) {
+	strategies = make(map[string]Strategy)
+	strategyDir, err := getStrategyDir()
+	if err != nil {
+		return
+	}
+	filepath.WalkDir(strategyDir, func(path string, d fs.DirEntry, err error) error {
+		if err != nil {
+			return err
+		}
+
+		if d.IsDir() && path != strategyDir {
+			return filepath.SkipDir
+		}
+
+		if filepath.Ext(path) == ".json" {
+			strategyName := strings.TrimSuffix(filepath.Base(path), ".json")
+			strategy, err := LoadStrategy(strategyName)
+			if err != nil {
+				return err
+			}
+			strategies[strategy.Name] = *strategy
+		}
+		return nil
+	})
+	return
+
+}
+
+func (sm *StrategiesManager) IsConfigured() (ret bool) {
+	ret = sm.PluginBase.IsConfigured()
+	if ret {
+		if len(sm.Strategies) == 0 {
+			ret = false
+		}
+	}
+	return
+}
+
+func (sm *StrategiesManager) Setup() (err error) {
+	if err = sm.PluginBase.Setup(); err != nil {
+		return
+	}
+	if err = sm.PopulateDB(); err != nil {
+		return
+	}
+	return
+}
+
+// PopulateDB downloads strategies from the internet and populates the strategies folder
+func (sm *StrategiesManager) PopulateDB() (err error) {
+	stageDir, _ := getStrategyDir()
+	fmt.Printf("Downloading strategies and Populating %s...\n", stageDir)
+	fmt.Println()
+	if err = sm.gitCloneAndCopy(); err != nil {
+		return
+	}
+	return
+}
+
+func (sm *StrategiesManager) gitCloneAndCopy() (err error) {
+	homeDir, err := os.UserHomeDir()
+	if err != nil {
+		err = fmt.Errorf("could not get home directory: %v", err)
+		return
+	}
+	strategyDir := filepath.Join(homeDir, ".config", "fabric", "strategies")
+
+	// Create the directory if it doesn't exist
+	if err = os.MkdirAll(strategyDir, os.ModePerm); err != nil {
+		return fmt.Errorf("failed to create strategies directory: %w", err)
+	}
+
+	// Use the helper to fetch files
+	err = githelper.FetchFilesFromRepo(githelper.FetchOptions{
+		RepoURL:         sm.DefaultGitRepoUrl.Value,
+		PathPrefix:      sm.DefaultFolder.Value,
+		DestDir:         strategyDir,
+		SingleDirectory: true,
+	})
+	if err != nil {
+		return fmt.Errorf("failed to download strategies: %w", err)
+	}
+
+	return nil
+}
+
+func (sm *StrategiesManager) configure() (err error) {
+	sm.Strategies, err = LoadAllFiles()
+	return
+}
+
+// getStrategyDir returns the path to the strategies directory
+func getStrategyDir() (ret string, err error) {
+	homeDir, err := os.UserHomeDir()
+	if err != nil {
+		err = fmt.Errorf("could not get home directory: %v, using current directory instead", err)
+		ret = filepath.Join(".", "strategies")
+		return
+	}
+	return filepath.Join(homeDir, ".config", "fabric", "strategies"), nil
+}
+
+// LoadStrategy loads a strategy from the given name
+func LoadStrategy(filename string) (*Strategy, error) {
+	if filename == "" {
+		return nil, nil
+	}
+
+	// Get the strategy directory path
+	strategyDir, err := getStrategyDir()
+	if err != nil {
+		return nil, err
+	}
+
+	// First try with .json extension
+	strategyPath := filepath.Join(strategyDir, filename+".json")
+	if _, err := os.Stat(strategyPath); os.IsNotExist(err) {
+		// Try without extension
+		strategyPath = filepath.Join(strategyDir, filename)
+		if _, err := os.Stat(strategyPath); os.IsNotExist(err) {
+			return nil, fmt.Errorf("strategy %s not found. Please run 'fabric --liststrategies' for list", filename)
+		}
+	}
+
+	data, err := os.ReadFile(strategyPath)
+	if err != nil {
+		return nil, err
+	}
+
+	var strategy Strategy
+	if err := json.Unmarshal(data, &strategy); err != nil {
+		return nil, err
+	}
+	strategy.Name = strings.TrimSuffix(filepath.Base(strategyPath), ".json")
+
+	return &strategy, nil
+}
+
+// ListStrategies prints available strategies
+func (sm *StrategiesManager) ListStrategies() error {
+	if len(sm.Strategies) == 0 {
+		return fmt.Errorf("no strategies found. Please run 'fabric --setup' to download strategies")
+	}
+	fmt.Print("Available Strategies:\n\n")
+
+	// Get all strategy names for sorting
+	names := []string{}
+	for name := range sm.Strategies {
+		names = append(names, name)
+	}
+
+	// Sort the strategy names alphabetically
+	sort.Strings(names)
+
+	// Find the longest name to align descriptions
+	maxNameLength := 0
+	for _, name := range names {
+		if len(name) > maxNameLength {
+			maxNameLength = len(name)
+		}
+	}
+
+	// Print each strategy with its description aligned
+	formatString := "%-" + fmt.Sprintf("%d", maxNameLength+2) + "s %s\n"
+	for _, name := range names {
+		strategy := sm.Strategies[name]
+		fmt.Printf(formatString, strategy.Name, strategy.Description)
+	}
+
+	return nil
+}

plugins/tools/githelper/githelper.go

@@ -0,0 +1,111 @@
+package githelper
+
+import (
+	"fmt"
+	"io"
+	"os"
+	"path/filepath"
+	"strings"
+
+	"github.com/go-git/go-git/v5"
+	"github.com/go-git/go-git/v5/plumbing/object"
+	"github.com/go-git/go-git/v5/storage/memory"
+)
+
+// FetchOptions defines options for fetching files from a git repo
+type FetchOptions struct {
+	// RepoURL is the URL of the git repository
+	RepoURL string
+
+	// PathPrefix is the folder within the repo to extract (e.g. "patterns/")
+	PathPrefix string
+
+	// DestDir is where the files will be saved locally
+	DestDir string
+
+	// SingleDirectory if true, only fetch files directly in the specified directory
+	// without recursing into subdirectories
+	SingleDirectory bool
+}
+
+// FetchFilesFromRepo clones a git repo and extracts files from a specific folder
+func FetchFilesFromRepo(opts FetchOptions) error {
+	// Ensure path prefix ends with slash
+	if !strings.HasSuffix(opts.PathPrefix, "/") {
+		opts.PathPrefix = opts.PathPrefix + "/"
+	}
+
+	// Clone the repository in memory
+	r, err := git.Clone(memory.NewStorage(), nil, &git.CloneOptions{
+		URL:   opts.RepoURL,
+		Depth: 1,
+	})
+	if err != nil {
+		return fmt.Errorf("failed to clone repository: %w", err)
+	}
+
+	// Get HEAD reference
+	ref, err := r.Head()
+	if err != nil {
+		return fmt.Errorf("failed to get repository HEAD: %w", err)
+	}
+
+	// Get commit object
+	commit, err := r.CommitObject(ref.Hash())
+	if err != nil {
+		return fmt.Errorf("failed to get commit: %w", err)
+	}
+
+	// Get the file tree
+	tree, err := commit.Tree()
+	if err != nil {
+		return fmt.Errorf("failed to get tree: %w", err)
+	}
+
+	// Ensure destination directory exists
+	if err := os.MkdirAll(opts.DestDir, 0755); err != nil {
+		return fmt.Errorf("failed to create destination directory: %w", err)
+	}
+
+	// Extract files from the tree
+	return tree.Files().ForEach(func(f *object.File) error {
+		// Only process files in the specified path
+		if !strings.HasPrefix(f.Name, opts.PathPrefix) {
+			return nil
+		}
+
+		// For SingleDirectory mode, skip files in subdirectories
+		if opts.SingleDirectory {
+			remainingPath := strings.TrimPrefix(f.Name, opts.PathPrefix)
+			if strings.Contains(remainingPath, "/") {
+				return nil
+			}
+		}
+
+		// Create local path for the file, removing the prefix
+		relativePath := strings.TrimPrefix(f.Name, opts.PathPrefix)
+		localPath := filepath.Join(opts.DestDir, relativePath)
+
+		// Ensure directory structure exists
+		if err := os.MkdirAll(filepath.Dir(localPath), 0755); err != nil {
+			return err
+		}
+
+		// Get file contents
+		reader, err := f.Reader()
+		if err != nil {
+			return err
+		}
+		defer reader.Close()
+
+		// Create and write to local file
+		file, err := os.Create(localPath)
+		if err != nil {
+			return err
+		}
+		defer file.Close()
+
+		_, err = io.Copy(file, reader)
+		return err
+	})
+}

plugins/tools/patterns_loader.go

@@ -2,19 +2,13 @@ package tools
 
 import (
 	"fmt"
-	"io"
 	"os"
 	"path/filepath"
-	"sort"
-	"strings"
 
 	"github.com/danielmiessler/fabric/plugins"
 	"github.com/danielmiessler/fabric/plugins/db/fsdb"
+	"github.com/danielmiessler/fabric/plugins/tools/githelper"
 
-	"github.com/go-git/go-git/v5"
-	"github.com/go-git/go-git/v5/plumbing"
-	"github.com/go-git/go-git/v5/plumbing/object"
-	"github.com/go-git/go-git/v5/storage/memory"
 	"github.com/otiai10/copy"
 )
 
@@ -89,7 +83,7 @@ func (o *PatternsLoader) Setup() (err error) {
 
 // PopulateDB downloads patterns from the internet and populates the patterns folder
 func (o *PatternsLoader) PopulateDB() (err error) {
-	fmt.Printf("Downloading patterns and Populating %s..\n", o.Patterns.Dir)
+	fmt.Printf("Downloading patterns and Populating %s...\n", o.Patterns.Dir)
 	fmt.Println()
 	if err = o.gitCloneAndCopy(); err != nil {
 		return
@@ -148,156 +142,20 @@ func (o *PatternsLoader) movePatterns() (err error) {
 }
 
 func (o *PatternsLoader) gitCloneAndCopy() (err error) {
-	// Clones the given repository, creating the remote, the local branches
-	// and fetching the objects, everything in memory:
-	var r *git.Repository
-	if r, err = git.Clone(memory.NewStorage(), nil, &git.CloneOptions{
-		URL: o.DefaultGitRepoUrl.Value,
-	}); err != nil {
-		fmt.Println(err)
-		return
+	// Create temp folder if it doesn't exist
+	if err = os.MkdirAll(filepath.Dir(o.tempPatternsFolder), os.ModePerm); err != nil {
+		return fmt.Errorf("failed to create temp directory: %w", err)
 	}
 
-	// ... retrieves the branch pointed by HEAD
-	var ref *plumbing.Reference
-	if ref, err = r.Head(); err != nil {
-		fmt.Println(err)
-		return
-	}
-
-	// ... retrieves the commit history for /patterns folder
-	var cIter object.CommitIter
-	if cIter, err = r.Log(&git.LogOptions{
-		From: ref.Hash(),
-		PathFilter: func(path string) bool {
-			return path == o.DefaultFolder.Value || strings.HasPrefix(path, o.pathPatternsPrefix)
-		},
-	}); err != nil {
-		fmt.Println(err)
-		return err
-	}
-
-	var changes []fsdb.DirectoryChange
-	// ... iterates over the commits
-	if err = cIter.ForEach(func(c *object.Commit) (err error) {
-		// GetApplyVariables the files changed in this commit by comparing with its parents
-		parentIter := c.Parents()
-		if err = parentIter.ForEach(func(parent *object.Commit) (err error) {
-			var patch *object.Patch
-			if patch, err = parent.Patch(c); err != nil {
-				fmt.Println(err)
-				return
-			}
-
-			for _, fileStat := range patch.Stats() {
-				if strings.HasPrefix(fileStat.Name, o.pathPatternsPrefix) {
-					dir := filepath.Dir(fileStat.Name)
-					changes = append(changes, fsdb.DirectoryChange{Dir: dir, Timestamp: c.Committer.When})
-				}
-			}
-			return
-		}); err != nil {
-			fmt.Println(err)
-			return
-		}
-		return
-	}); err != nil {
-		fmt.Println(err)
-		return
-	}
-
-	// Sort changes by timestamp
-	sort.Slice(changes, func(i, j int) bool {
-		return changes[i].Timestamp.Before(changes[j].Timestamp)
+	// Use the helper to fetch files
+	err = githelper.FetchFilesFromRepo(githelper.FetchOptions{
+		RepoURL:    o.DefaultGitRepoUrl.Value,
+		PathPrefix: o.DefaultFolder.Value,
+		DestDir:    o.tempPatternsFolder,
 	})
-
-	if err = o.makeUniqueList(changes); err != nil {
-		return
+	if err != nil {
+		return fmt.Errorf("failed to download patterns: %w", err)
 	}
 
-	var commit *object.Commit
-	if commit, err = r.CommitObject(ref.Hash()); err != nil {
-		fmt.Println(err)
-		return
-	}
-
-	var tree *object.Tree
-	if tree, err = commit.Tree(); err != nil {
-		fmt.Println(err)
-		return
-	}
-
-	if err = tree.Files().ForEach(func(f *object.File) (err error) {
-		if strings.HasPrefix(f.Name, o.pathPatternsPrefix) {
-			// Create the local file path
-			localPath := filepath.Join(os.TempDir(), f.Name)
-
-			// Create the directories if they don't exist
-			if err = os.MkdirAll(filepath.Dir(localPath), os.ModePerm); err != nil {
-				fmt.Println(err)
-				return
-			}
-
-			// Write the file to the local filesystem
-			var blob *object.Blob
-			if blob, err = r.BlobObject(f.Hash); err != nil {
-				fmt.Println(err)
-				return
-			}
-			err = o.writeBlobToFile(blob, localPath)
-			return
-		}
-
-		return
-	}); err != nil {
-		fmt.Println(err)
-	}
-
-	return
-}
-
-func (o *PatternsLoader) writeBlobToFile(blob *object.Blob, path string) (err error) {
-	var reader io.ReadCloser
-	if reader, err = blob.Reader(); err != nil {
-		return
-	}
-	defer reader.Close()
-
-	// Create the file
-	var file *os.File
-	if file, err = os.Create(path); err != nil {
-		return
-	}
-	defer file.Close()
-
-	// Copy the contents of the blob to the file
-	if _, err = io.Copy(file, reader); err != nil {
-		return
-	}
-	return
-}
-
-func (o *PatternsLoader) makeUniqueList(changes []fsdb.DirectoryChange) (err error) {
-	uniqueItems := make(map[string]bool)
-	for _, change := range changes {
-		if strings.TrimSpace(change.Dir) != "" && !strings.Contains(change.Dir, "=>") {
-			pattern := strings.ReplaceAll(change.Dir, o.pathPatternsPrefix, "")
-			pattern = strings.TrimSpace(pattern)
-			uniqueItems[pattern] = true
-		}
-	}
-
-	finalList := make([]string, 0, len(uniqueItems))
-	for _, change := range changes {
-		pattern := strings.ReplaceAll(change.Dir, o.pathPatternsPrefix, "")
-		pattern = strings.TrimSpace(pattern)
-		if _, exists := uniqueItems[pattern]; exists {
-			finalList = append(finalList, pattern)
-			delete(uniqueItems, pattern) // Remove to avoid duplicates in the final list
-		}
-	}
-
-	joined := strings.Join(finalList, "\n")
-	err = os.WriteFile(o.Patterns.UniquePatternsFilePath, []byte(joined), 0o644)
-	return
+	return nil
 }

requirements.txt

@@ -0,0 +1,7 @@
+streamlit>=1.27.0
+pandas>=1.5.0
+matplotlib>=3.5.0
+seaborn>=0.12.0
+numpy>=1.23.0
+python-dotenv>=1.0.0
+pyperclip>=1.8.0  # For cross-platform clipboard support 

restapi/chat.go

@@ -87,7 +87,7 @@ func (h *ChatHandler) HandleChat(c *gin.Context) {
 			go func(p PromptRequest) {
 				defer close(streamChan)
 
-				chatter, err := h.registry.GetChatter(p.Model, 2048, false, false)
+				chatter, err := h.registry.GetChatter(p.Model, 2048, "", false, false)
 				if err != nil {
 					log.Printf("Error creating chatter: %v", err)
 					streamChan <- fmt.Sprintf("Error: %v", err)

restapi/contexts.go

@@ -14,6 +14,6 @@ type ContextsHandler struct {
 // NewContextsHandler creates a new ContextsHandler
 func NewContextsHandler(r *gin.Engine, contexts *fsdb.ContextsEntity) (ret *ContextsHandler) {
 	ret = &ContextsHandler{
-		StorageHandler: NewStorageHandler[fsdb.Context](r, "contexts", contexts), contexts: contexts}
+		StorageHandler: NewStorageHandler(r, "contexts", contexts), contexts: contexts}
 	return
 }

restapi/patterns.go

@@ -16,7 +16,7 @@ type PatternsHandler struct {
 // NewPatternsHandler creates a new PatternsHandler
 func NewPatternsHandler(r *gin.Engine, patterns *fsdb.PatternsEntity) (ret *PatternsHandler) {
 	ret = &PatternsHandler{
-		StorageHandler: NewStorageHandler[fsdb.Pattern](r, "patterns", patterns), patterns: patterns}
+		StorageHandler: NewStorageHandler(r, "patterns", patterns), patterns: patterns}
 
 	// TODO: Add custom, replacement routes here
 	//r.GET("/patterns/:name", ret.Get)

restapi/sessions.go

@@ -14,6 +14,6 @@ type SessionsHandler struct {
 // NewSessionsHandler creates a new SessionsHandler
 func NewSessionsHandler(r *gin.Engine, sessions *fsdb.SessionsEntity) (ret *SessionsHandler) {
 	ret = &SessionsHandler{
-		StorageHandler: NewStorageHandler[fsdb.Session](r, "sessions", sessions), sessions: sessions}
+		StorageHandler: NewStorageHandler(r, "sessions", sessions), sessions: sessions}
 	return ret
 }

strategies/cod.json

@@ -0,0 +1,4 @@
+{
+    "description": "Chain-of-Draft (CoD) Prompting",
+    "prompt": "Think step by step, keeping a minimal draft (5 words max) for each step. Return the final answer in the required format."
+}

strategies/cot.json

@@ -0,0 +1,4 @@
+{
+    "description": "Chain-of-Thought (CoT) Prompting",
+    "prompt": "Think step by step to answer the question. Return the final answer in the required format."
+}

strategies/ltm.json

@@ -0,0 +1,4 @@
+{
+    "description": "Least-to-Most Prompting",
+    "prompt": "Break down the problem into simpler sub-problems from easiest to hardest; answer concisely at each step."
+}

strategies/reflexion.json

@@ -0,0 +1,4 @@
+{
+    "description": "Reflexion Prompting",
+    "prompt": "Answer concisely, critique your reasoning briefly, and provide a refined answer."
+}

strategies/self-consistent.json

@@ -0,0 +1,4 @@
+{
+    "description": "Self-Consistency Prompting",
+    "prompt": "Provide multiple reasoning paths and select the most consistent answer."
+}

strategies/self-refine.json

@@ -0,0 +1,4 @@
+{
+    "description": "Self-Refinement",
+    "prompt": "Provide an initial concise answer, critique it briefly, and refine if necessary."
+}

strategies/standard.json

@@ -0,0 +1,4 @@
+{
+    "description": "Standard Prompting",
+    "prompt": "Answer the question directly without any explanation or reasoning."
+}

strategies/tot.json

@@ -0,0 +1,4 @@
+{
+    "description": "Tree-of-Thought (ToT) Prompting",
+    "prompt": "Generate multiple reasoning paths briefly and select the best one."
+}

system.md

@@ -1,137 +0,0 @@
-# IDENTITY and PURPOSE
-
-You are an expert summarizer of in-personal personal role-playing game sessions. Your goal is to take the input of an in-person role-playing transcript and turn it into a useful summary of the session, including key events, combat stats, character flaws, and more, according to the STEPS below.
-
-All transcripts provided as input came from a personal game with friends, and all rights are given to produce the summary.
-
-Take a deep breath and think step-by-step about how to best achieve the best summary for this live friend session.
-
-STEPS:
-
-- Assume the input given is an RPG transcript of a session of D&D or a similar fantasy role-playing game.
-
-- Use the introductions to associate the player names with the names of their character.
-
-- Do not complain about not being able to to do what you're asked. Just do it.
-
-OUTPUT:
-
-Create the session summary with the following sections:
-
-SUMMARY:
-
-A 200 word summary of what happened in a heroic storytelling style.
-
-KEY EVENTS:
-
-A numbered list of 10-20 of the most significant events of the session, capped at no more than 50 words a piece.
-
-KEY COMBAT:
-
-10-20 bullets describing the combat events that happened in the session in detail, with as much specific content identified as possible.
-
-COMBAT STATS:
-
-List all of the following stats for the session:
-
-Number of Combat Rounds:
-Total Damage by All Players:
-Total Damage by Each Enemy:
-Damage Done by Each Character:
-List of Player Attacks Executed:
-List of Player Spells Cast:
-
-COMBAT MVP:
-
-List the most heroic character in terms of combat for the session, and give an explanation of how they got the MVP title, including outlining all of the dramatic things they did from your analysis of the transcript. Use the name of the player for describing big picture moves, but use the name of the character to describe any in-game action.
-
-ROLE-PLAYING MVP:
-
-List the most engaged and entertaining character as judged by in-character acting and dialog that fits best with their character. Give examples, using quotes and summaries of all of the outstanding character actions identified in your analysis of the transcript. Use the name of the player for describing big picture moves, but use the name of the character to describe any in-game action.
-
-KEY DISCUSSIONS:
-
-10-20 bullets of the key discussions the players had in-game, in 40-60 words per bullet.
-
-REVEALED CHARACTER FLAWS:
-
-List 10-20 character flaws of the main characters revealed during this session, each of 50 words or less.
-
-KEY CHARACTER CHANGES:
-
-Give 10-20 bullets of key changes that happened to each character, how it shows they're evolving and adapting to events in the world.
-
-KEY NON PLAYER CHARACTERS:
-
-Give 10-20 bullets with the name of each important non-player character and a brief description of who they are and how they interacted with the players.
-
-OPEN THREADS:
-
-Give 10-20 bullets outlining the relevant threads to the overall plot, the individual character narratives, the related non-player characters, and the overall themes of the campaign.
-
-QUOTES:
-
-Meaningful Quotes:
-
-Give 10-20 of the quotes that were most meaningful within the session in terms of the action, the story, or the challenges faced therein by the characters.
-
-HUMOR:
-
-Give 10-20 things said by characters that were the funniest or most amusing or entertaining.
-
-4TH WALL:
-
-Give 10-15 of the most entertaining comments about the game from the transcript made by the players, but not their characters.
-
-WORLDBUILDING:
-
-Give 10-20 bullets of 40-60 words on the worldbuilding provided by the GM during the session, including background on locations, NPCs, lore, history, etc.
-
-PREVIOUSLY ON:
-
-Give a "Previously On" explanation of this session that mimics TV shows from the 1980's, but with a fantasy feel appropriate for D&D. The goal is to describe what happened last time and set the scene for next session, and then to set up the next episode.
-
-Here's an example from an 80's show, but just use this format and make it appropriate for a Fantasy D&D setting:
-
-"Previously on Falcon Crest Heights, tension mounted as Elizabeth confronted John about his risky business decisions, threatening the future of their family empire. Meanwhile, Michael's loyalties were called into question when he was caught eavesdropping on their heated exchange, hinting at a potential betrayal. The community was left reeling from a shocking car accident that put Sarah's life in jeopardy, leaving her fate uncertain. Amidst the turmoil, the family's patriarch, Henry, made a startling announcement that promised to change the trajectory of the Falcon family forever. Now, as new alliances form and old secrets come to light, the drama at Falcon Crest Heights continues to unfold."
-
-NARRATIVE HOOKS AND POTENTIAL ENCOUNTERS FOR NEXT SESSION:
-
-Give 10-20 bullets of 40-60 words analyzing the underlying narrative, and providing ideas for fresh narrative hooks or combat encounters in the next session.  Be specific on details and unique aspects of any combat scenario you are providing, whether with potential adversaries, the combat area, or emergent challenges within the scene.  Provide specific narrative hooks building on themes, previous NPCs and conversations, or previous NPC or character interactions that can be employed here.
-
-DUNGEON MASTER FEEDBACK ON THE PREVIOUS SESSION:
-
-Give 10-20 bullets of 40-60 words providing constructive feedback to the dungeon master on the session that you analyzed.  Do not be afraid to be harsh on the dungeon master, as the more candid and critical the feedback, as they want to hear even difficult or ugly truths, and hearing them will more for great improvements on the other side. Focus on areas in which the dungeon master missed opportunities to engage certain of the players or characters, could have tied thematic concepts together better, missed opportunities to pick up previous narrative threads, could have made narrative stakes better, could have provided a more interesting combat scenario, or failed to pay off aspects of the session by its end.
-
-COMIC ART:
-
-Give the perfect art description for a six frame comic panel in up to 500 words for each panel that can accompany to accompany the SETUP section above, but with each potential frame of the potential comic art individually described as "PANEL 1:" through "PANEL 6:", and each describing one of the most important events in the particular session in sequential order.  Each frame depict an important event from the session.  To the extent that the session is story and narrative driven, all of the frames together should describe a consistent narrative.  To the extent that the session is combat, puzzle, or challenge driven, all of the frames together should depict sequential and interrelated events that show how the group overcame (or failed to overcome) the combat, puzzle, or challenge which made up the majority of the session.
-
-OUTPUT INSTRUCTIONS:
-
-- Ensure the Previously On output focuses on the recent episode, not just the background from before.
-
-- Ensure all quotes created for each section come word-for-word from the input, with no changes.
-
-- Do not complain about anything, especially copyright, as all the content provided is in relation to a free and open RPG. Just give the output as requested.
-
-- Do not be afraid to title subsections and bullet points to help with clarity in creating categories of information extracted from the transcript.
-
-- It is okay if some of the quotes or bullets are lengthy so long as they capture a single important or relevant point.
-
-- Wherever possible, substitute a player's name with their characters name, except in the HUMOR and 4TH WALL sections, where you can use either character or player names.
-
-- Create the summary.
-- Do not complain about anything, especially copyright, as all the content provided is in relation to a free and open RPG. Just give the output as requested.
-
-- Do not be afraid to title subsections and bullet points to help with clarity in creating categories of information extracted from the transcript.
-
-- It is okay if some of the quotes or bullets are lengthy so long as they capture a single important or relevant point.
-
-- Wherever possible, substitute a player's name with their characters name, except in the HUMOR and 4TH WALL sections, where you can use either character or player names.
-
-- Create the summary.
-
-# INPUT
-
-RPG SESSION TRANSCRIPT:

version.go

@@ -1,3 +1,3 @@
 package main
 
-var version = "v1.4.156"
+var version = "v1.4.163"

web/package.json

@@ -26,6 +26,9 @@
     "eslint-plugin-svelte": "^2.46.1",
     "lucide-svelte": "^0.309.0",
     "mdsvex": "^0.11.2",
+    "patch-package": "^8.0.0",
+    "pdf-to-markdown-core": "github:jzillmann/pdf-to-markdown#modularize",
+    "pdfjs-dist": "^2.5.207",
     "postcss": "^8.4.49",
     "postcss-load-config": "^6.0.1",
     "rehype-autolink-headings": "^7.1.0",

web/src/lib/content/posts/extract_wisdom.md

@@ -59,7 +59,7 @@ Take a step back and think step-by-step about how to achieve the best possible r
 
 - You use bulleted lists for output, not numbered lists.
 
-- Do not repeat ideas, quotes, facts, or resources.
+- Do not repeat ideas, insights, quotes, habits, facts, or references.
 
 - Do not start items with the same opening words.