Version 60

README.md

@@ -6,10 +6,12 @@ This is the release repository for Fan Control, a highly customizable fan contro
 
 ## New
 
+* Ryzen 5000 support
+* <b>Refined more compact card UI</b>
+* <b>Start % (activation % before) and Stop % are now separated</b>
+* Hysteresis can now be switched from one-way (down only) to two-way (up and down)
+* Average function for the mix curve
 * Start with Windows setting
-* New fan curve type : "Target". Will hold the configured "load" fan speed until the idle temperature is reached.
-* Support for newer Nvidia RTX cards with NvAPIWrapper
-* Support for external sensors with .sensor files (see Example.sensor in your application folder)
 
 ## Installation
 
@@ -29,7 +31,7 @@ This is the release repository for Fan Control, a highly customizable fan contro
 * Save, edit and load multiple profiles
 * Multiple temperature sources ( CPU, GPU, motherboard, hard drives, ".sensor" file )
 * Custom fan curves
-* Fine tune the fan control response with steps, activation %, response time and hysteresis
+* Fine tune the fan control response with steps, start %, stop %, response time and hysteresis
 * Mix different curves and sensors together
 * Modern, dashboard-style UI
 * Works as a background application with a customizable tray icon
@@ -41,7 +43,7 @@ This is the release repository for Fan Control, a highly customizable fan contro
 * Linear : Temperature based linear function
 * Graph : Temperature based custom curve
 * Target: Temperature based that holds speed until target temperature is reached
-* Mix : Use two different curves and apply a mix function (Max, Sum)
+* Mix : Use two different curves and apply a mix function (Max, Sum, Average)
 * Sync : Sync to an existing control
 * Flat: Set a fixed %
 

version.json

@@ -1,4 +1,4 @@
 {
-  "Number": 47,
-  "Message": "Prevent multiple instances running from the same folder\r\n-Hide individual fan speed cards\r\n-Updated LibreHardwareMonitor (NCT6687D support)"
+  "Number": 60,
+  "Message": "- Help dialog for each fan curve type when clicking on its logo icon \r\n- Target fan curve now has reponse time parameter"
 }