resin settings, some tines support tweaks

TODO.md

@@ -1,5 +1,6 @@
 TODO:
   * Make flat stem support default
+  * make flat inner shape default
   * support repositioning to print on the back surface of the keycap
   * implement regular polygon for skin extrusions
   * switch to skin-shaped extrusions by default

customizer.scad

@@ -1130,7 +1130,7 @@ module upside_down() {
 module sideways() {
   $key_shape_type = "flat_sided_square";
   $dish_overdraw_width = abs(extra_keytop_length_for_flat_sides());
-  extra_y_rotation = atan2($width_difference/2,$total_depth);
+  extra_y_rotation = atan2($width_difference/2,$total_depth); // TODO assumes centered top
   translate([0,0,cos(extra_y_rotation) * total_key_width()/2])
   rotate([0,90 + extra_y_rotation ,0]) children();
 }
@@ -1158,7 +1158,14 @@ module auto_place() {
     translate_u(x,-y) children(child_index);
   }
 }
-module arrows(profile, rows = [4,4,4,3]) {
+
+// suggested settings for resin prints
+module resin() {
+  $stem_slop = 0;
+  $stem_inner_slop = 0;
+  $stem_support_type = "disable";
+  children();
+}module arrows(profile, rows = [4,4,4,3]) {
   positions = [[0, 0], [1, 0], [2, 0], [1, 1]];
   legends = ["←", "↓", "→", "↑"];
 
@@ -3308,7 +3315,7 @@ function unit_length(length) = $unit * (length - 1) + 18.16;
 
 // extra length to the vertical tine of the inside cherry cross
 // splits the stem into halves - allows easier fitment
-extra_vertical = 0.6;
+extra_vertical = 100;
 
 module inside_cherry_cross(slop) {
   // inside cross
@@ -3494,7 +3501,7 @@ function unit_length(length) = $unit * (length - 1) + 18.16;
 
 // extra length to the vertical tine of the inside cherry cross
 // splits the stem into halves - allows easier fitment
-extra_vertical = 0.6;
+extra_vertical = 100;
 
 module inside_cherry_cross(slop) {
   // inside cross
@@ -3690,7 +3697,7 @@ function unit_length(length) = $unit * (length - 1) + 18.16;
 
 // extra length to the vertical tine of the inside cherry cross
 // splits the stem into halves - allows easier fitment
-extra_vertical = 0.6;
+extra_vertical = 100;
 
 module inside_cherry_cross(slop) {
   // inside cross
@@ -4049,7 +4056,7 @@ function unit_length(length) = $unit * (length - 1) + 18.16;
 
 // extra length to the vertical tine of the inside cherry cross
 // splits the stem into halves - allows easier fitment
-extra_vertical = 0.6;
+extra_vertical = 100;
 
 module inside_cherry_cross(slop) {
   // inside cross
@@ -4292,7 +4299,7 @@ function unit_length(length) = $unit * (length - 1) + 18.16;
 
 // extra length to the vertical tine of the inside cherry cross
 // splits the stem into halves - allows easier fitment
-extra_vertical = 0.6;
+extra_vertical = 100;
 
 module inside_cherry_cross(slop) {
   // inside cross
@@ -4361,7 +4368,7 @@ module tines_support(stem_type, stem_support_height, slop) {
         }
 
         // 2 vertical tines holding either side of the cruciform
-        for (x = [1.15, -1.15]) {
+        for (x = [2, -2]) {
           translate([x,0,$stem_support_height / 2]) {
             cube([
               0.5,
@@ -6086,6 +6093,7 @@ module shape(thickness_difference, depth_difference=0){
   }
 }
 
+// Not currently used due to CGAL errors. Rounds the shape via minkowski
 module rounded_shape() {
   color($primary_color) minkowski(){
     // half minkowski in the z direction
@@ -6174,9 +6182,9 @@ module top_placement(depth_difference=0) {
   top_tilt_by_height = -$top_tilt / $key_height;
   top_tilt_y_by_length = $double_sculpted ? (-$top_tilt_y / $key_length) : 0;
 
-  // minkowski_height = $rounded_key ? $minkowski_radius : 0;
+  minkowski_height = $rounded_key ? $minkowski_radius : 0;
 
-  translate([$top_skew_x + $dish_skew_x, $top_skew + $dish_skew_y, $total_depth - depth_difference]){
+  translate([$top_skew_x + $dish_skew_x, $top_skew + $dish_skew_y, $total_depth - depth_difference + minkowski_height/2]){
     rotate([top_tilt_by_height, top_tilt_y_by_length,0]){
       children();
     }
@@ -6296,9 +6304,7 @@ module outer_total_shape(inset=false) {
 // takes all the bits and glues them together. requires configuration with special variables.
 module key(inset=false) {
   difference(){
-    outer_total_shape(inset) {
-      children();
-    };
+    outer_total_shape(inset);
 
     if ($inner_shape_type != "disable") {
       translate([0,0,-SMALLEST_POSSIBLE]) {

src/key.scad

@@ -24,6 +24,7 @@ module shape(thickness_difference, depth_difference=0){
   }
 }
 
+// Not currently used due to CGAL errors. Rounds the shape via minkowski
 module rounded_shape() {
   color($primary_color) minkowski(){
     // half minkowski in the z direction
@@ -112,9 +113,9 @@ module top_placement(depth_difference=0) {
   top_tilt_by_height = -$top_tilt / $key_height;
   top_tilt_y_by_length = $double_sculpted ? (-$top_tilt_y / $key_length) : 0;
 
-  // minkowski_height = $rounded_key ? $minkowski_radius : 0;
+  minkowski_height = $rounded_key ? $minkowski_radius : 0;
 
-  translate([$top_skew_x + $dish_skew_x, $top_skew + $dish_skew_y, $total_depth - depth_difference]){
+  translate([$top_skew_x + $dish_skew_x, $top_skew + $dish_skew_y, $total_depth - depth_difference + minkowski_height/2]){
     rotate([top_tilt_by_height, top_tilt_y_by_length,0]){
       children();
     }
@@ -234,9 +235,7 @@ module outer_total_shape(inset=false) {
 // takes all the bits and glues them together. requires configuration with special variables.
 module key(inset=false) {
   difference(){
-    outer_total_shape(inset) {
-      children();
-    };
+    outer_total_shape(inset);
 
     if ($inner_shape_type != "disable") {
       translate([0,0,-SMALLEST_POSSIBLE]) {

src/key_transformations.scad

@@ -195,7 +195,7 @@ module upside_down() {
 module sideways() {
   $key_shape_type = "flat_sided_square";
   $dish_overdraw_width = abs(extra_keytop_length_for_flat_sides());
-  extra_y_rotation = atan2($width_difference/2,$total_depth);
+  extra_y_rotation = atan2($width_difference/2,$total_depth); // TODO assumes centered top
   translate([0,0,cos(extra_y_rotation) * total_key_width()/2])
   rotate([0,90 + extra_y_rotation ,0]) children();
 }
@@ -223,3 +223,11 @@ module auto_place() {
     translate_u(x,-y) children(child_index);
   }
 }
+
+// suggested settings for resin prints
+module resin() {
+  $stem_slop = 0;
+  $stem_inner_slop = 0;
+  $stem_support_type = "disable";
+  children();
+}

src/stem_supports/tines.scad

@@ -36,7 +36,7 @@ module tines_support(stem_type, stem_support_height, slop) {
         }
 
         // 2 vertical tines holding either side of the cruciform
-        for (x = [1.15, -1.15]) {
+        for (x = [2, -2]) {
           translate([x,0,$stem_support_height / 2]) {
             cube([
               0.5,

src/stems/cherry.scad

@@ -2,7 +2,7 @@ include <../functions.scad>
 
 // extra length to the vertical tine of the inside cherry cross
 // splits the stem into halves - allows easier fitment
-extra_vertical = 0.6;
+extra_vertical = 100;
 
 module inside_cherry_cross(slop) {
   // inside cross