empty commit

docs/modules/usage/llms/llms.md

@@ -4,11 +4,11 @@ OpenHands can connect to any LLM supported by LiteLLM. However, it requires a po
 
 ## Model Recommendations
 
-Based on our evaluations of language models for coding tasks (using the SWE-bench dataset), we can provide some recommendations for model selection. Some analyses can be found in [this blog article comparing LLMs](https://www.all-hands.dev/blog/evaluation-of-llms-as-coding-agents-on-swe-bench-at-30x-speed) and [this blog article with some more recent results](https://www.all-hands.dev/blog/openhands-codeact-21-an-open-state-of-the-art-software-development-agent).
+Based on a recent evaluation of language models for coding tasks (using the SWE-bench dataset), we can provide some recommendations for model selection. The full analysis can be found in [this blog article](https://www.all-hands.dev/blog/evaluation-of-llms-as-coding-agents-on-swe-bench-at-30x-speed).
 
 When choosing a model, consider both the quality of outputs and the associated costs. Here's a summary of the findings:
 
-- Claude 3.5 Sonnet is the best by a fair amount, achieving a 53% resolve rate on SWE-Bench Verified with the default agent in OpenHands.
+- Claude 3.5 Sonnet is the best by a fair amount, achieving a 27% resolve rate with the default agent in OpenHands.
 - GPT-4o lags behind, and o1-mini actually performed somewhat worse than GPT-4o. We went in and analyzed the results a little, and briefly it seemed like o1 was sometimes "overthinking" things, performing extra environment configuration tasks when it could just go ahead and finish the task.
 - Finally, the strongest open models were Llama 3.1 405 B and deepseek-v2.5, and they performed reasonably, even besting some of the closed models.
 

frontend/__tests__/utils/extractModelAndProvider.test.ts

@@ -59,9 +59,9 @@ describe("extractModelAndProvider", () => {
       separator: "/",
     });
 
-    expect(extractModelAndProvider("claude-3-5-sonnet-20240620")).toEqual({
+    expect(extractModelAndProvider("claude-3-5-sonnet-20241022")).toEqual({
       provider: "anthropic",
-      model: "claude-3-5-sonnet-20240620",
+      model: "claude-3-5-sonnet-20241022",
       separator: "/",
     });
 

frontend/__tests__/utils/organizeModelsAndProviders.test.ts

@@ -15,7 +15,7 @@ test("organizeModelsAndProviders", () => {
     "gpt-4o",
     "together-ai-21.1b-41b",
     "gpt-4o-mini",
-    "anthropic/claude-3-5-sonnet-20241022",
+    "claude-3-5-sonnet-20241022",
     "claude-3-haiku-20240307",
     "claude-2",
     "claude-2.1",

frontend/src/i18n/translation.json

@@ -535,8 +535,7 @@
     "pt": "Socket não inicializado",
     "ko-KR": "소켓이 초기화되지 않았습니다",
     "ar": "لم يتم تهيئة Socket",
-    "tr": "Soket başlatılmadı",
-    "no": "Socket ikke initialisert"
+    "tr": "Soket başlatılmadı"
   },
   "EXPLORER$UPLOAD_ERROR_MESSAGE": {
     "en": "Error uploading file",
@@ -549,8 +548,7 @@
     "pt": "Erro ao fazer upload do arquivo",
     "ko-KR": "파일 업로드 중 오류 발생",
     "ar": "خطأ في تحميل الملف",
-    "tr": "Dosya yüklenirken hata oluştu",
-    "no": "Feil ved opplasting av fil"
+    "tr": "Dosya yüklenirken hata oluştu"
   },
   "EXPLORER$LABEL_DROP_FILES": {
     "en": "Drop files here",
@@ -559,7 +557,6 @@
     "zh-TW": "將檔案拖曳至此",
     "es": "Suelta los archivos aquí",
     "fr": "Déposez les fichiers ici",
-    "no": "Slipp filer her",
     "it": "Trascina i file qui",
     "pt": "Solte os arquivos aqui",
     "ko-KR": "파일을 여기에 놓으세요",
@@ -577,8 +574,7 @@
     "pt": "Espaço de trabalho",
     "ko-KR": "작업 공간",
     "ar": "مساحة العمل",
-    "tr": "Çalışma alanı",
-    "no": "Arbeidsområde"
+    "tr": "Çalışma alanı"
   },
   "EXPLORER$EMPTY_WORKSPACE_MESSAGE": {
     "en": "No files in workspace",
@@ -591,8 +587,7 @@
     "pt": "Nenhum arquivo no espaço de trabalho",
     "ko-KR": "작업 공간에 파일이 없습니다",
     "ar": "لا توجد ملفات في مساحة العمل",
-    "tr": "Çalışma alanında dosya yok",
-    "no": "Ingen filer i arbeidsområdet"
+    "tr": "Çalışma alanında dosya yok"
   },
   "EXPLORER$LOADING_WORKSPACE_MESSAGE": {
     "en": "Loading workspace...",
@@ -605,8 +600,7 @@
     "pt": "Carregando espaço de trabalho...",
     "ko-KR": "작업 공간 로딩 중...",
     "ar": "جارٍ تحميل مساحة العمل...",
-    "tr": "Çalışma alanı yükleniyor...",
-    "no": "Laster arbeidsområde..."
+    "tr": "Çalışma alanı yükleniyor..."
   },
   "EXPLORER$REFRESH_ERROR_MESSAGE": {
     "en": "Error refreshing workspace",
@@ -619,8 +613,7 @@
     "pt": "Erro ao atualizar o espaço de trabalho",
     "ko-KR": "작업 공간 새로 고침 오류",
     "ar": "خطأ في تحديث مساحة العمل",
-    "tr": "Çalışma alanı yenilenirken hata oluştu",
-    "no": "Feil ved oppdatering av arbeidsområde"
+    "tr": "Çalışma alanı yenilenirken hata oluştu"
   },
   "EXPLORER$UPLOAD_SUCCESS_MESSAGE": {
     "en": "Successfully uploaded {{count}} file(s)",
@@ -633,8 +626,7 @@
     "pt": "{{count}} arquivo(s) carregado(s) com sucesso",
     "ko-KR": "{{count}}개의 파일을 성공적으로 업로드했습니다",
     "ar": "تم تحميل {{count}} ملف (ملفات) بنجاح",
-    "tr": "{{count}} dosya başarıyla yüklendi",
-    "no": "Lastet opp {{count}} fil(er) vellykket"
+    "tr": "{{count}} dosya başarıyla yüklendi"
   },
   "EXPLORER$NO_FILES_UPLOADED_MESSAGE": {
     "en": "No files were uploaded",
@@ -647,8 +639,7 @@
     "pt": "Nenhum arquivo foi carregado",
     "ko-KR": "업로드된 파일이 없습니다",
     "ar": "لم يتم تحميل أي ملفات",
-    "tr": "Hiçbir dosya yüklenmedi",
-    "no": "Ingen filer ble lastet opp"
+    "tr": "Hiçbir dosya yüklenmedi"
   },
   "EXPLORER$UPLOAD_PARTIAL_SUCCESS_MESSAGE": {
     "en": "{{count}} file(s) were skipped during upload",
@@ -661,8 +652,7 @@
     "pt": "{{count}} arquivo(s) foram ignorados durante o upload",
     "ko-KR": "업로드 중 {{count}}개의 파일이 건너뛰어졌습니다",
     "ar": "تم تخطي {{count}} ملف (ملفات) أثناء التحميل",
-    "tr": "Yükleme sırasında {{count}} dosya atlandı",
-    "no": "{{count}} fil(er) ble hoppet over under opplasting"
+    "tr": "Yükleme sırasında {{count}} dosya atlandı"
   },
   "EXPLORER$UPLOAD_UNEXPECTED_RESPONSE_MESSAGE": {
     "en": "Unexpected response structure from server",
@@ -675,8 +665,7 @@
     "pt": "Estrutura de resposta inesperada do servidor",
     "ko-KR": "서버로부터 예상치 못한 응답 구조",
     "ar": "بنية استجابة غير متوقعة من الخادم",
-    "tr": "Sunucudan beklenmeyen yanıt yapısı",
-    "no": "Uventet responsstruktur fra serveren"
+    "tr": "Sunucudan beklenmeyen yanıt yapısı"
   },
   "LOAD_SESSION$MODAL_TITLE": {
     "en": "Return to existing session?",
@@ -810,325 +799,95 @@
   },
   "FEEDBACK$EMAIL_PLACEHOLDER": {
     "en": "Enter your email address",
-    "es": "Ingresa tu correo electrónico",
-    "zh-CN": "输入您的电子邮件地址",
-    "zh-TW": "輸入您的電子郵件地址",
-    "ko-KR": "이메일 주소를 입력하세요",
-    "no": "Skriv inn din e-postadresse",
-    "ar": "أدخل عنوان بريدك الإلكتروني",
-    "de": "Geben Sie Ihre E-Mail-Adresse ein",
-    "fr": "Entrez votre adresse e-mail",
-    "it": "Inserisci il tuo indirizzo email",
-    "pt": "Digite seu endereço de e-mail",
-    "tr": "E-posta adresinizi girin"
+    "es": "Ingresa tu correo electrónico"
   },
   "FEEDBACK$PASSWORD_COPIED_MESSAGE": {
     "en": "Password copied to clipboard.",
-    "es": "Contraseña copiada al portapapeles.",
-    "zh-CN": "密码已复制到剪贴板。",
-    "zh-TW": "密碼已複製到剪貼板。",
-    "ko-KR": "비밀번호가 클립보드에 복사되었습니다.",
-    "no": "Passord kopiert til utklippstavlen.",
-    "ar": "تم نسخ كلمة المرور إلى الحافظة.",
-    "de": "Passwort in die Zwischenablage kopiert.",
-    "fr": "Mot de passe copié dans le presse-papiers.",
-    "it": "Password copiata negli appunti.",
-    "pt": "Senha copiada para a área de transferência.",
-    "tr": "Parola panoya kopyalandı."
+    "es": "Contraseña copiada al portapapeles."
   },
   "FEEDBACK$GO_TO_FEEDBACK": {
     "en": "Go to shared feedback",
-    "es": "Ir a feedback compartido",
-    "zh-CN": "转到共享反馈",
-    "zh-TW": "前往共享反饋",
-    "ko-KR": "공유된 피드백으로 이동",
-    "no": "Gå til delt tilbakemelding",
-    "ar": "الذهاب إلى التعليقات المشتركة",
-    "de": "Zum geteilten Feedback gehen",
-    "fr": "Aller aux commentaires partagés",
-    "it": "Vai al feedback condiviso",
-    "pt": "Ir para feedback compartilhado",
-    "tr": "Paylaşılan geri bildirimlere git"
+    "es": "Ir a feedback compartido"
   },
   "FEEDBACK$PASSWORD": {
     "en": "Password:",
-    "es": "Contraseña:",
-    "zh-CN": "密码：",
-    "zh-TW": "密碼：",
-    "ko-KR": "비밀번호:",
-    "no": "Passord:",
-    "ar": "كلمة المرور:",
-    "de": "Passwort:",
-    "fr": "Mot de passe :",
-    "it": "Password:",
-    "pt": "Senha:",
-    "tr": "Parola:"
+    "es": "Contraseña:"
   },
   "FEEDBACK$INVALID_EMAIL_FORMAT": {
     "en": "Invalid email format",
-    "es": "Formato de correo inválido",
-    "zh-CN": "无效的电子邮件格式",
-    "zh-TW": "無效的電子郵件格式",
-    "ko-KR": "잘못된 이메일 형식",
-    "no": "Ugyldig e-postformat",
-    "ar": "تنسيق البريد الإلكتروني غير صالح",
-    "de": "Ungültiges E-Mail-Format",
-    "fr": "Format d'e-mail invalide",
-    "it": "Formato email non valido",
-    "pt": "Formato de e-mail inválido",
-    "tr": "Geçersiz e-posta biçimi"
+    "es": "Formato de correo inválido"
   },
   "FEEDBACK$FAILED_TO_SHARE": {
     "en": "Failed to share, please contact the developers:",
-    "es": "Error al compartir, por favor contacta con los desarrolladores:",
-    "zh-CN": "分享失败，请联系开发人员：",
-    "zh-TW": "分享失敗，請聯繫開發人員：",
-    "ko-KR": "공유 실패, 개발자에게 문의하세요:",
-    "no": "Deling mislyktes, vennligst kontakt utviklerne:",
-    "ar": "فشل المشاركة، يرجى الاتصال بالمطورين:",
-    "de": "Teilen fehlgeschlagen, bitte kontaktieren Sie die Entwickler:",
-    "fr": "Échec du partage, veuillez contacter les développeurs :",
-    "it": "Condivisione fallita, contattare gli sviluppatori:",
-    "pt": "Falha ao compartilhar, entre em contato com os desenvolvedores:",
-    "tr": "Paylaşım başarısız, lütfen geliştiricilerle iletişime geçin:"
+    "es": "Error al compartir, por favor contacta con los desarrolladores:"
   },
   "FEEDBACK$COPY_LABEL": {
     "en": "Copy",
-    "es": "Copiar",
-    "zh-CN": "复制",
-    "zh-TW": "複製",
-    "ko-KR": "복사",
-    "no": "Kopier",
-    "ar": "نسخ",
-    "de": "Kopieren",
-    "fr": "Copier",
-    "it": "Copia",
-    "pt": "Copiar",
-    "tr": "Kopyala"
+    "es": "Copiar"
   },
   "FEEDBACK$SHARING_SETTINGS_LABEL": {
     "en": "Sharing settings",
-    "es": "Configuración de compartir",
-    "zh-CN": "共享设置",
-    "zh-TW": "共享設定",
-    "ko-KR": "공유 설정",
-    "no": "Delingsinnstillinger",
-    "ar": "إعدادات المشاركة",
-    "de": "Freigabeeinstellungen",
-    "fr": "Paramètres de partage",
-    "it": "Impostazioni di condivisione",
-    "pt": "Configurações de compartilhamento",
-    "tr": "Paylaşım ayarları"
+    "es": "Configuración de compartir"
   },
   "SECURITY$UNKNOWN_ANALYZER_LABEL":{
     "en": "Unknown security analyzer chosen",
-    "es": "Analizador de seguridad desconocido",
-    "zh-CN": "选择了未知的安全分析器",
-    "zh-TW": "選擇了未知的安全分析器",
-    "ko-KR": "알 수 없는 보안 분석기가 선택되었습니다",
-    "no": "Ukjent sikkerhetsanalysator valgt",
-    "ar": "تم اختيار محلل أمان غير معروف",
-    "de": "Unbekannter Sicherheitsanalysator ausgewählt",
-    "fr": "Analyseur de sécurité inconnu choisi",
-    "it": "Analizzatore di sicurezza sconosciuto selezionato",
-    "pt": "Analisador de segurança desconhecido escolhido",
-    "tr": "Bilinmeyen güvenlik analizörü seçildi"
+    "es": "Analizador de seguridad desconocido"
   },
   "INVARIANT$UPDATE_POLICY_LABEL": {
     "en": "Update Policy",
-    "es": "Actualizar política",
-    "zh-CN": "更新策略",
-    "zh-TW": "更新策略",
-    "ko-KR": "정책 업데이트",
-    "no": "Oppdater policy",
-    "ar": "تحديث السياسة",
-    "de": "Richtlinie aktualisieren",
-    "fr": "Mettre à jour la politique",
-    "it": "Aggiorna policy",
-    "pt": "Atualizar política",
-    "tr": "İlkeyi güncelle"
+    "es": "Actualizar política"
   },
   "INVARIANT$UPDATE_SETTINGS_LABEL": {
     "en": "Update Settings",
-    "es": "Actualizar configuración",
-    "zh-CN": "更新设置",
-    "zh-TW": "更新設定",
-    "ko-KR": "설정 업데이트",
-    "no": "Oppdater innstillinger",
-    "ar": "تحديث الإعدادات",
-    "de": "Einstellungen aktualisieren",
-    "fr": "Mettre à jour les paramètres",
-    "it": "Aggiorna impostazioni",
-    "pt": "Atualizar configurações",
-    "tr": "Ayarları güncelle"
+    "es": "Actualizar configuración"
   },
   "INVARIANT$SETTINGS_LABEL": {
     "en": "Settings",
-    "es": "Configuración",
-    "zh-CN": "设置",
-    "zh-TW": "設定",
-    "ko-KR": "설정",
-    "no": "Innstillinger",
-    "ar": "الإعدادات",
-    "de": "Einstellungen",
-    "fr": "Paramètres",
-    "it": "Impostazioni",
-    "pt": "Configurações",
-    "tr": "Ayarlar"
+    "es": "Configuración"
   },
   "INVARIANT$ASK_CONFIRMATION_RISK_SEVERITY_LABEL": {
     "en": "Ask for user confirmation on risk severity:",
-    "es": "Preguntar por confirmación del usuario sobre severidad del riesgo:",
-    "zh-CN": "询问用户确认风险等级：",
-    "zh-TW": "詢問用戶確認風險等級：",
-    "ko-KR": "위험 심각도에 대한 사용자 확인 요청:",
-    "no": "Be om brukerbekreftelse på risikoalvorlighet:",
-    "ar": "اطلب تأكيد المستخدم على مستوى الخطورة:",
-    "de": "Nach Benutzerbestätigung für Risikoschweregrad fragen:",
-    "fr": "Demander la confirmation de l'utilisateur sur la gravité du risque :",
-    "it": "Chiedi conferma all'utente sulla gravità del rischio:",
-    "pt": "Solicitar confirmação do usuário sobre a gravidade do risco:",
-    "tr": "Risk şiddeti için kullanıcı onayı iste:"
+    "es": "Preguntar por confirmación del usuario sobre severidad del riesgo:"
   },
   "INVARIANT$DONT_ASK_FOR_CONFIRMATION_LABEL": {
     "en": "Don't ask for confirmation",
-    "es": "No solicitar confirmación",
-    "zh-CN": "不要请求确认",
-    "zh-TW": "不要請求確認",
-    "ko-KR": "확인 요청하지 않음",
-    "no": "Ikke spør om bekreftelse",
-    "ar": "لا تطلب التأكيد",
-    "de": "Nicht nach Bestätigung fragen",
-    "fr": "Ne pas demander de confirmation",
-    "it": "Non chiedere conferma",
-    "pt": "Não solicitar confirmação",
-    "tr": "Onay isteme"
+    "es": "No solicitar confirmación"
   },
   "INVARIANT$INVARIANT_ANALYZER_LABEL": {
     "en": "Invariant Analyzer",
-    "es": "Analizador de invariantes",
-    "zh-CN": "不变量分析器",
-    "zh-TW": "不變量分析器",
-    "ko-KR": "불변성 분석기",
-    "no": "Invariant-analysator",
-    "ar": "محلل الثوابت",
-    "de": "Invarianten-Analysator",
-    "fr": "Analyseur d'invariants",
-    "it": "Analizzatore di invarianti",
-    "pt": "Analisador de invariantes",
-    "tr": "Değişmez Analizörü"
+    "es": "Analizador de invariantes"
   },
   "INVARIANT$INVARIANT_ANALYZER_MESSAGE": {
     "en": "Invariant Analyzer continuously monitors your OpenHands agent for security issues.",
-    "es": "Analizador de invariantes continuamente monitorea tu agente de OpenHands por problemas de seguridad.",
-    "zh-CN": "不变量分析器持续监控您的 OpenHands 代理的安全问题。",
-    "zh-TW": "不變量分析器持續監控您的 OpenHands 代理的安全問題。",
-    "ko-KR": "불변성 분석기는 OpenHands 에이전트의 보안 문제를 지속적으로 모니터링합니다.",
-    "no": "Invariant-analysatoren overvåker kontinuerlig OpenHands-agenten din for sikkerhetsproblemer.",
-    "ar": "يراقب محلل الثوابت وكيل OpenHands الخاص بك باستمرار للتحقق من المشاكل الأمنية.",
-    "de": "Der Invarianten-Analysator überwacht kontinuierlich Ihren OpenHands-Agenten auf Sicherheitsprobleme.",
-    "fr": "L'analyseur d'invariants surveille en permanence votre agent OpenHands pour détecter les problèmes de sécurité.",
-    "it": "L'analizzatore di invarianti monitora continuamente il tuo agente OpenHands per problemi di sicurezza.",
-    "pt": "O analisador de invariantes monitora continuamente seu agente OpenHands em busca de problemas de segurança.",
-    "tr": "Değişmez Analizörü, OpenHands ajanınızı güvenlik sorunları için sürekli olarak izler."
+    "es": "Analizador de invariantes continuamente monitorea tu agente de OpenHands por problemas de seguridad."
   },
   "INVARIANT$CLICK_TO_LEARN_MORE_LABEL": {
     "en": "Click to learn more",
-    "es": "Clic para aprender más",
-    "zh-CN": "点击了解更多",
-    "zh-TW": "點擊了解更多",
-    "ko-KR": "자세히 알아보기",
-    "no": "Klikk for å lære mer",
-    "ar": "انقر لمعرفة المزيد",
-    "de": "Klicken Sie, um mehr zu erfahren",
-    "fr": "Cliquez pour en savoir plus",
-    "it": "Clicca per saperne di più",
-    "pt": "Clique para saber mais",
-    "tr": "Daha fazla bilgi için tıklayın"
+    "es": "Clic para aprender más"
   },
   "INVARIANT$POLICY_LABEL": {
     "en": "Policy",
-    "es": "Política",
-    "zh-CN": "策略",
-    "zh-TW": "策略",
-    "ko-KR": "정책",
-    "no": "Policy",
-    "ar": "السياسة",
-    "de": "Richtlinie",
-    "fr": "Politique",
-    "it": "Policy",
-    "pt": "Política",
-    "tr": "İlke"
+    "es": "Política"
   },
   "INVARIANT$LOG_LABEL": {
     "en": "Logs",
-    "es": "Logs",
-    "zh-CN": "日志",
-    "zh-TW": "日誌",
-    "ko-KR": "로그",
-    "no": "Logger",
-    "ar": "السجلات",
-    "de": "Protokolle",
-    "fr": "Journaux",
-    "it": "Log",
-    "pt": "Logs",
-    "tr": "Günlükler"
+    "es": "Logs"
   },
   "INVARIANT$EXPORT_TRACE_LABEL": {
     "en": "Export Trace",
-    "es": "Exportar traza",
-    "zh-CN": "导出跟踪",
-    "zh-TW": "匯出追蹤",
-    "ko-KR": "추적 내보내기",
-    "no": "Eksporter sporing",
-    "ar": "تصدير التتبع",
-    "de": "Ablaufverfolgung exportieren",
-    "fr": "Exporter la trace",
-    "it": "Esporta traccia",
-    "pt": "Exportar rastreamento",
-    "tr": "İzlemeyi dışa aktar"
+    "es": "Exportar traza"
   },
   "INVARIANT$TRACE_EXPORTED_MESSAGE": {
     "en": "Trace exported",
-    "es": "Traza exportada",
-    "zh-CN": "跟踪已导出",
-    "zh-TW": "追蹤已匯出",
-    "ko-KR": "추적 내보내기 완료",
-    "no": "Sporing eksportert",
-    "ar": "تم تصدير التتبع",
-    "de": "Ablaufverfolgung exportiert",
-    "fr": "Trace exportée",
-    "it": "Traccia esportata",
-    "pt": "Rastreamento exportado",
-    "tr": "İzleme dışa aktarıldı"
+    "es": "Traza exportada"
   },
   "INVARIANT$POLICY_UPDATED_MESSAGE": {
     "en": "Policy updated",
-    "es": "Política actualizada",
-    "zh-CN": "策略已更新",
-    "zh-TW": "策略已更新",
-    "ko-KR": "정책이 업데이트되었습니다",
-    "no": "Policy oppdatert",
-    "ar": "تم تحديث السياسة",
-    "de": "Richtlinie aktualisiert",
-    "fr": "Politique mise à jour",
-    "it": "Policy aggiornata",
-    "pt": "Política atualizada",
-    "tr": "İlke güncellendi"
+    "es": "Política actualizada"
   },
   "INVARIANT$SETTINGS_UPDATED_MESSAGE": {
     "en": "Settings updated",
-    "es": "Configuración actualizada",
-    "zh-CN": "设置已更新",
-    "zh-TW": "設定已更新",
-    "ko-KR": "설정이 업데이트되었습니다",
-    "no": "Innstillinger oppdatert",
-    "ar": "تم تحديث الإعدادات",
-    "de": "Einstellungen aktualisiert",
-    "fr": "Paramètres mis à jour",
-    "it": "Impostazioni aggiornate",
-    "pt": "Configurações atualizadas",
-    "tr": "Ayarlar güncellendi"
+    "es": "Configuración actualizada"
   },
   "CHAT_INTERFACE$INITIALIZING_AGENT_LOADING_MESSAGE": {
     "en": "Starting up!",
@@ -1517,8 +1276,7 @@
     "pt": "Conversa de chat",
     "es": "Conversación de chat",
     "ar": "محادثة تلقيم",
-    "fr": "Conversation de chat",
-    "tr": "Sohbet Konuşması"
+    "fr": "Conversation de chat"
   },
   "CHAT_INTERFACE$UNKNOWN_SENDER": {
     "en": "Unknown",

frontend/src/utils/organizeModelsAndProviders.ts

@@ -26,7 +26,6 @@ import { extractModelAndProvider } from "./extractModelAndProvider";
  */
 export const organizeModelsAndProviders = (models: string[]) => {
   const object: Record<string, { separator: string; models: string[] }> = {};
-
   models.forEach((model) => {
     const {
       separator,
@@ -46,6 +45,5 @@ export const organizeModelsAndProviders = (models: string[]) => {
     }
     object[key].models.push(modelId);
   });
-
   return object;
 };

get-docker.sh

@@ -1,744 +0,0 @@
-#!/bin/sh
-set -e
-# Docker Engine for Linux installation script.
-#
-# This script is intended as a convenient way to configure docker's package
-# repositories and to install Docker Engine, This script is not recommended
-# for production environments. Before running this script, make yourself familiar
-# with potential risks and limitations, and refer to the installation manual
-# at https://docs.docker.com/engine/install/ for alternative installation methods.
-#
-# The script:
-#
-# - Requires `root` or `sudo` privileges to run.
-# - Attempts to detect your Linux distribution and version and configure your
-#   package management system for you.
-# - Doesn't allow you to customize most installation parameters.
-# - Installs dependencies and recommendations without asking for confirmation.
-# - Installs the latest stable release (by default) of Docker CLI, Docker Engine,
-#   Docker Buildx, Docker Compose, containerd, and runc. When using this script
-#   to provision a machine, this may result in unexpected major version upgrades
-#   of these packages. Always test upgrades in a test environment before
-#   deploying to your production systems.
-# - Isn't designed to upgrade an existing Docker installation. When using the
-#   script to update an existing installation, dependencies may not be updated
-#   to the expected version, resulting in outdated versions.
-#
-# Source code is available at https://github.com/docker/docker-install/
-#
-# Usage
-# ==============================================================================
-#
-# To install the latest stable versions of Docker CLI, Docker Engine, and their
-# dependencies:
-#
-# 1. download the script
-#
-#   $ curl -fsSL https://get.docker.com -o install-docker.sh
-#
-# 2. verify the script's content
-#
-#   $ cat install-docker.sh
-#
-# 3. run the script with --dry-run to verify the steps it executes
-#
-#   $ sh install-docker.sh --dry-run
-#
-# 4. run the script either as root, or using sudo to perform the installation.
-#
-#   $ sudo sh install-docker.sh
-#
-# Command-line options
-# ==============================================================================
-#
-# --version <VERSION>
-# Use the --version option to install a specific version, for example:
-#
-#   $ sudo sh install-docker.sh --version 23.0
-#
-# --channel <stable|test>
-#
-# Use the --channel option to install from an alternative installation channel.
-# The following example installs the latest versions from the "test" channel,
-# which includes pre-releases (alpha, beta, rc):
-#
-#   $ sudo sh install-docker.sh --channel test
-#
-# Alternatively, use the script at https://test.docker.com, which uses the test
-# channel as default.
-#
-# --mirror <Aliyun|AzureChinaCloud>
-#
-# Use the --mirror option to install from a mirror supported by this script.
-# Available mirrors are "Aliyun" (https://mirrors.aliyun.com/docker-ce), and
-# "AzureChinaCloud" (https://mirror.azure.cn/docker-ce), for example:
-#
-#   $ sudo sh install-docker.sh --mirror AzureChinaCloud
-#
-# ==============================================================================
-
-
-# Git commit from https://github.com/docker/docker-install when
-# the script was uploaded (Should only be modified by upload job):
-SCRIPT_COMMIT_SHA="711a0d41213afabc30b963f82c56e1442a3efe1c"
-
-# strip "v" prefix if present
-VERSION="${VERSION#v}"
-
-# The channel to install from:
-#   * stable
-#   * test
-DEFAULT_CHANNEL_VALUE="stable"
-if [ -z "$CHANNEL" ]; then
-	CHANNEL=$DEFAULT_CHANNEL_VALUE
-fi
-
-DEFAULT_DOWNLOAD_URL="https://download.docker.com"
-if [ -z "$DOWNLOAD_URL" ]; then
-	DOWNLOAD_URL=$DEFAULT_DOWNLOAD_URL
-fi
-
-DEFAULT_REPO_FILE="docker-ce.repo"
-if [ -z "$REPO_FILE" ]; then
-	REPO_FILE="$DEFAULT_REPO_FILE"
-fi
-
-mirror=''
-DRY_RUN=${DRY_RUN:-}
-while [ $# -gt 0 ]; do
-	case "$1" in
-		--channel)
-			CHANNEL="$2"
-			shift
-			;;
-		--dry-run)
-			DRY_RUN=1
-			;;
-		--mirror)
-			mirror="$2"
-			shift
-			;;
-		--version)
-			VERSION="${2#v}"
-			shift
-			;;
-		--*)
-			echo "Illegal option $1"
-			;;
-	esac
-	shift $(( $# > 0 ? 1 : 0 ))
-done
-
-case "$mirror" in
-	Aliyun)
-		DOWNLOAD_URL="https://mirrors.aliyun.com/docker-ce"
-		;;
-	AzureChinaCloud)
-		DOWNLOAD_URL="https://mirror.azure.cn/docker-ce"
-		;;
-	"")
-		;;
-	*)
-		>&2 echo "unknown mirror '$mirror': use either 'Aliyun', or 'AzureChinaCloud'."
-		exit 1
-		;;
-esac
-
-case "$CHANNEL" in
-	stable|test)
-		;;
-	*)
-		>&2 echo "unknown CHANNEL '$CHANNEL': use either stable or test."
-		exit 1
-		;;
-esac
-
-command_exists() {
-	command -v "$@" > /dev/null 2>&1
-}
-
-# version_gte checks if the version specified in $VERSION is at least the given
-# SemVer (Maj.Minor[.Patch]), or CalVer (YY.MM) version.It returns 0 (success)
-# if $VERSION is either unset (=latest) or newer or equal than the specified
-# version, or returns 1 (fail) otherwise.
-#
-# examples:
-#
-# VERSION=23.0
-# version_gte 23.0  // 0 (success)
-# version_gte 20.10 // 0 (success)
-# version_gte 19.03 // 0 (success)
-# version_gte 26.1  // 1 (fail)
-version_gte() {
-	if [ -z "$VERSION" ]; then
-			return 0
-	fi
-	version_compare "$VERSION" "$1"
-}
-
-# version_compare compares two version strings (either SemVer (Major.Minor.Path),
-# or CalVer (YY.MM) version strings. It returns 0 (success) if version A is newer
-# or equal than version B, or 1 (fail) otherwise. Patch releases and pre-release
-# (-alpha/-beta) are not taken into account
-#
-# examples:
-#
-# version_compare 23.0.0 20.10 // 0 (success)
-# version_compare 23.0 20.10   // 0 (success)
-# version_compare 20.10 19.03  // 0 (success)
-# version_compare 20.10 20.10  // 0 (success)
-# version_compare 19.03 20.10  // 1 (fail)
-version_compare() (
-	set +x
-
-	yy_a="$(echo "$1" | cut -d'.' -f1)"
-	yy_b="$(echo "$2" | cut -d'.' -f1)"
-	if [ "$yy_a" -lt "$yy_b" ]; then
-		return 1
-	fi
-	if [ "$yy_a" -gt "$yy_b" ]; then
-		return 0
-	fi
-	mm_a="$(echo "$1" | cut -d'.' -f2)"
-	mm_b="$(echo "$2" | cut -d'.' -f2)"
-
-	# trim leading zeros to accommodate CalVer
-	mm_a="${mm_a#0}"
-	mm_b="${mm_b#0}"
-
-	if [ "${mm_a:-0}" -lt "${mm_b:-0}" ]; then
-		return 1
-	fi
-
-	return 0
-)
-
-is_dry_run() {
-	if [ -z "$DRY_RUN" ]; then
-		return 1
-	else
-		return 0
-	fi
-}
-
-is_wsl() {
-	case "$(uname -r)" in
-	*microsoft* ) true ;; # WSL 2
-	*Microsoft* ) true ;; # WSL 1
-	* ) false;;
-	esac
-}
-
-is_darwin() {
-	case "$(uname -s)" in
-	*darwin* ) true ;;
-	*Darwin* ) true ;;
-	* ) false;;
-	esac
-}
-
-deprecation_notice() {
-	distro=$1
-	distro_version=$2
-	echo
-	printf "\033[91;1mDEPRECATION WARNING\033[0m\n"
-	printf "    This Linux distribution (\033[1m%s %s\033[0m) reached end-of-life and is no longer supported by this script.\n" "$distro" "$distro_version"
-	echo   "    No updates or security fixes will be released for this distribution, and users are recommended"
-	echo   "    to upgrade to a currently maintained version of $distro."
-	echo
-	printf   "Press \033[1mCtrl+C\033[0m now to abort this script, or wait for the installation to continue."
-	echo
-	sleep 10
-}
-
-get_distribution() {
-	lsb_dist=""
-	# Every system that we officially support has /etc/os-release
-	if [ -r /etc/os-release ]; then
-		lsb_dist="$(. /etc/os-release && echo "$ID")"
-	fi
-	# Returning an empty string here should be alright since the
-	# case statements don't act unless you provide an actual value
-	echo "$lsb_dist"
-}
-
-echo_docker_as_nonroot() {
-	if is_dry_run; then
-		return
-	fi
-	if command_exists docker && [ -e /var/run/docker.sock ]; then
-		(
-			set -x
-			$sh_c 'docker version'
-		) || true
-	fi
-
-	# intentionally mixed spaces and tabs here -- tabs are stripped by "<<-EOF", spaces are kept in the output
-	echo
-	echo "================================================================================"
-	echo
-	if version_gte "20.10"; then
-		echo "To run Docker as a non-privileged user, consider setting up the"
-		echo "Docker daemon in rootless mode for your user:"
-		echo
-		echo "    dockerd-rootless-setuptool.sh install"
-		echo
-		echo "Visit https://docs.docker.com/go/rootless/ to learn about rootless mode."
-		echo
-	fi
-	echo
-	echo "To run the Docker daemon as a fully privileged service, but granting non-root"
-	echo "users access, refer to https://docs.docker.com/go/daemon-access/"
-	echo
-	echo "WARNING: Access to the remote API on a privileged Docker daemon is equivalent"
-	echo "         to root access on the host. Refer to the 'Docker daemon attack surface'"
-	echo "         documentation for details: https://docs.docker.com/go/attack-surface/"
-	echo
-	echo "================================================================================"
-	echo
-}
-
-# Check if this is a forked Linux distro
-check_forked() {
-
-	# Check for lsb_release command existence, it usually exists in forked distros
-	if command_exists lsb_release; then
-		# Check if the `-u` option is supported
-		set +e
-		lsb_release -a -u > /dev/null 2>&1
-		lsb_release_exit_code=$?
-		set -e
-
-		# Check if the command has exited successfully, it means we're in a forked distro
-		if [ "$lsb_release_exit_code" = "0" ]; then
-			# Print info about current distro
-			cat <<-EOF
-			You're using '$lsb_dist' version '$dist_version'.
-			EOF
-
-			# Get the upstream release info
-			lsb_dist=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[:space:]')
-			dist_version=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[:space:]')
-
-			# Print info about upstream distro
-			cat <<-EOF
-			Upstream release is '$lsb_dist' version '$dist_version'.
-			EOF
-		else
-			if [ -r /etc/debian_version ] && [ "$lsb_dist" != "ubuntu" ] && [ "$lsb_dist" != "raspbian" ]; then
-				if [ "$lsb_dist" = "osmc" ]; then
-					# OSMC runs Raspbian
-					lsb_dist=raspbian
-				else
-					# We're Debian and don't even know it!
-					lsb_dist=debian
-				fi
-				dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
-				case "$dist_version" in
-					12)
-						dist_version="bookworm"
-					;;
-					11)
-						dist_version="bullseye"
-					;;
-					10)
-						dist_version="buster"
-					;;
-					9)
-						dist_version="stretch"
-					;;
-					8)
-						dist_version="jessie"
-					;;
-				esac
-			fi
-		fi
-	fi
-}
-
-do_install() {
-	echo "# Executing docker install script, commit: $SCRIPT_COMMIT_SHA"
-
-	if command_exists docker; then
-		cat >&2 <<-'EOF'
-			Warning: the "docker" command appears to already exist on this system.
-
-			If you already have Docker installed, this script can cause trouble, which is
-			why we're displaying this warning and provide the opportunity to cancel the
-			installation.
-
-			If you installed the current Docker package using this script and are using it
-			again to update Docker, you can safely ignore this message.
-
-			You may press Ctrl+C now to abort this script.
-		EOF
-		( set -x; sleep 20 )
-	fi
-
-	user="$(id -un 2>/dev/null || true)"
-
-	sh_c='sh -c'
-	if [ "$user" != 'root' ]; then
-		if command_exists sudo; then
-			sh_c='sudo -E sh -c'
-		elif command_exists su; then
-			sh_c='su -c'
-		else
-			cat >&2 <<-'EOF'
-			Error: this installer needs the ability to run commands as root.
-			We are unable to find either "sudo" or "su" available to make this happen.
-			EOF
-			exit 1
-		fi
-	fi
-
-	if is_dry_run; then
-		sh_c="echo"
-	fi
-
-	# perform some very rudimentary platform detection
-	lsb_dist=$( get_distribution )
-	lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')"
-
-	if is_wsl; then
-		echo
-		echo "WSL DETECTED: We recommend using Docker Desktop for Windows."
-		echo "Please get Docker Desktop from https://www.docker.com/products/docker-desktop/"
-		echo
-		cat >&2 <<-'EOF'
-
-			You may press Ctrl+C now to abort this script.
-		EOF
-		( set -x; sleep 20 )
-	fi
-
-	case "$lsb_dist" in
-
-		ubuntu)
-			if command_exists lsb_release; then
-				dist_version="$(lsb_release --codename | cut -f2)"
-			fi
-			if [ -z "$dist_version" ] && [ -r /etc/lsb-release ]; then
-				dist_version="$(. /etc/lsb-release && echo "$DISTRIB_CODENAME")"
-			fi
-		;;
-
-		debian|raspbian)
-			dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
-			case "$dist_version" in
-				12)
-					dist_version="bookworm"
-				;;
-				11)
-					dist_version="bullseye"
-				;;
-				10)
-					dist_version="buster"
-				;;
-				9)
-					dist_version="stretch"
-				;;
-				8)
-					dist_version="jessie"
-				;;
-			esac
-		;;
-
-		centos|rhel)
-			if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
-				dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
-			fi
-		;;
-
-		*)
-			if command_exists lsb_release; then
-				dist_version="$(lsb_release --release | cut -f2)"
-			fi
-			if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
-				dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
-			fi
-		;;
-
-	esac
-
-	# Check if this is a forked Linux distro
-	check_forked
-
-	# Print deprecation warnings for distro versions that recently reached EOL,
-	# but may still be commonly used (especially LTS versions).
-	case "$lsb_dist.$dist_version" in
-		centos.8|centos.7|rhel.7)
-			deprecation_notice "$lsb_dist" "$dist_version"
-			;;
-		debian.buster|debian.stretch|debian.jessie)
-			deprecation_notice "$lsb_dist" "$dist_version"
-			;;
-		raspbian.buster|raspbian.stretch|raspbian.jessie)
-			deprecation_notice "$lsb_dist" "$dist_version"
-			;;
-		ubuntu.bionic|ubuntu.xenial|ubuntu.trusty)
-			deprecation_notice "$lsb_dist" "$dist_version"
-			;;
-		ubuntu.mantic|ubuntu.lunar|ubuntu.kinetic|ubuntu.impish|ubuntu.hirsute|ubuntu.groovy|ubuntu.eoan|ubuntu.disco|ubuntu.cosmic)
-			deprecation_notice "$lsb_dist" "$dist_version"
-			;;
-		fedora.*)
-			if [ "$dist_version" -lt 39 ]; then
-				deprecation_notice "$lsb_dist" "$dist_version"
-			fi
-			;;
-	esac
-
-	# Run setup for each distro accordingly
-	case "$lsb_dist" in
-		ubuntu|debian|raspbian)
-			pre_reqs="ca-certificates curl"
-			apt_repo="deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] $DOWNLOAD_URL/linux/$lsb_dist $dist_version $CHANNEL"
-			(
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c 'apt-get -qq update >/dev/null'
-				$sh_c "DEBIAN_FRONTEND=noninteractive apt-get -y -qq install $pre_reqs >/dev/null"
-				$sh_c 'install -m 0755 -d /etc/apt/keyrings'
-				$sh_c "curl -fsSL \"$DOWNLOAD_URL/linux/$lsb_dist/gpg\" -o /etc/apt/keyrings/docker.asc"
-				$sh_c "chmod a+r /etc/apt/keyrings/docker.asc"
-				$sh_c "echo \"$apt_repo\" > /etc/apt/sources.list.d/docker.list"
-				$sh_c 'apt-get -qq update >/dev/null'
-			)
-			pkg_version=""
-			if [ -n "$VERSION" ]; then
-				if is_dry_run; then
-					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
-				else
-					# Will work for incomplete versions IE (17.12), but may not actually grab the "latest" if in the test channel
-					pkg_pattern="$(echo "$VERSION" | sed 's/-ce-/~ce~.*/g' | sed 's/-/.*/g')"
-					search_command="apt-cache madison docker-ce | grep '$pkg_pattern' | head -1 | awk '{\$1=\$1};1' | cut -d' ' -f 3"
-					pkg_version="$($sh_c "$search_command")"
-					echo "INFO: Searching repository for VERSION '$VERSION'"
-					echo "INFO: $search_command"
-					if [ -z "$pkg_version" ]; then
-						echo
-						echo "ERROR: '$VERSION' not found amongst apt-cache madison results"
-						echo
-						exit 1
-					fi
-					if version_gte "18.09"; then
-							search_command="apt-cache madison docker-ce-cli | grep '$pkg_pattern' | head -1 | awk '{\$1=\$1};1' | cut -d' ' -f 3"
-							echo "INFO: $search_command"
-							cli_pkg_version="=$($sh_c "$search_command")"
-					fi
-					pkg_version="=$pkg_version"
-				fi
-			fi
-			(
-				pkgs="docker-ce${pkg_version%=}"
-				if version_gte "18.09"; then
-						# older versions didn't ship the cli and containerd as separate packages
-						pkgs="$pkgs docker-ce-cli${cli_pkg_version%=} containerd.io"
-				fi
-				if version_gte "20.10"; then
-						pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
-				fi
-				if version_gte "23.0"; then
-						pkgs="$pkgs docker-buildx-plugin"
-				fi
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "DEBIAN_FRONTEND=noninteractive apt-get -y -qq install $pkgs >/dev/null"
-			)
-			echo_docker_as_nonroot
-			exit 0
-			;;
-		centos|fedora|rhel)
-			repo_file_url="$DOWNLOAD_URL/linux/$lsb_dist/$REPO_FILE"
-			(
-				if ! is_dry_run; then
-					set -x
-				fi
-				if command_exists dnf5; then
-					$sh_c "dnf -y -q --setopt=install_weak_deps=False install dnf-plugins-core"
-					$sh_c "dnf5 config-manager addrepo --save-filename=docker-ce.repo --from-repofile='$repo_file_url'"
-
-					if [ "$CHANNEL" != "stable" ]; then
-						$sh_c "dnf5 config-manager setopt \"docker-ce-*.enabled=0\""
-						$sh_c "dnf5 config-manager setopt \"docker-ce-$CHANNEL.enabled=1\""
-					fi
-					$sh_c "dnf makecache"
-				elif command_exists dnf; then
-					$sh_c "dnf -y -q --setopt=install_weak_deps=False install dnf-plugins-core"
-					$sh_c "dnf config-manager --add-repo $repo_file_url"
-
-					if [ "$CHANNEL" != "stable" ]; then
-						$sh_c "dnf config-manager --set-disabled \"docker-ce-*\""
-						$sh_c "dnf config-manager --set-enabled \"docker-ce-$CHANNEL\""
-					fi
-					$sh_c "dnf makecache"
-				else
-					$sh_c "yum -y -q install yum-utils"
-					$sh_c "yum-config-manager --add-repo $repo_file_url"
-
-					if [ "$CHANNEL" != "stable" ]; then
-						$sh_c "yum-config-manager --disable \"docker-ce-*\""
-						$sh_c "yum-config-manager --enable \"docker-ce-$CHANNEL\""
-					fi
-					$sh_c "yum makecache"
-				fi
-			)
-			pkg_version=""
-			if command_exists dnf; then
-				pkg_manager="dnf"
-				pkg_manager_flags="-y -q --best"
-			else
-				pkg_manager="yum"
-				pkg_manager_flags="-y -q"
-			fi
-			if [ -n "$VERSION" ]; then
-				if is_dry_run; then
-					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
-				else
-					if [ "$lsb_dist" = "fedora" ]; then
-						pkg_suffix="fc$dist_version"
-					else
-						pkg_suffix="el"
-					fi
-					pkg_pattern="$(echo "$VERSION" | sed 's/-ce-/\\\\.ce.*/g' | sed 's/-/.*/g').*$pkg_suffix"
-					search_command="$pkg_manager list --showduplicates docker-ce | grep '$pkg_pattern' | tail -1 | awk '{print \$2}'"
-					pkg_version="$($sh_c "$search_command")"
-					echo "INFO: Searching repository for VERSION '$VERSION'"
-					echo "INFO: $search_command"
-					if [ -z "$pkg_version" ]; then
-						echo
-						echo "ERROR: '$VERSION' not found amongst $pkg_manager list results"
-						echo
-						exit 1
-					fi
-					if version_gte "18.09"; then
-						# older versions don't support a cli package
-						search_command="$pkg_manager list --showduplicates docker-ce-cli | grep '$pkg_pattern' | tail -1 | awk '{print \$2}'"
-						cli_pkg_version="$($sh_c "$search_command" | cut -d':' -f 2)"
-					fi
-					# Cut out the epoch and prefix with a '-'
-					pkg_version="-$(echo "$pkg_version" | cut -d':' -f 2)"
-				fi
-			fi
-			(
-				pkgs="docker-ce$pkg_version"
-				if version_gte "18.09"; then
-					# older versions didn't ship the cli and containerd as separate packages
-					if [ -n "$cli_pkg_version" ]; then
-						pkgs="$pkgs docker-ce-cli-$cli_pkg_version containerd.io"
-					else
-						pkgs="$pkgs docker-ce-cli containerd.io"
-					fi
-				fi
-				if version_gte "20.10"; then
-					pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
-				fi
-				if version_gte "23.0"; then
-						pkgs="$pkgs docker-buildx-plugin"
-				fi
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "$pkg_manager $pkg_manager_flags install $pkgs"
-			)
-			echo_docker_as_nonroot
-			exit 0
-			;;
-		sles)
-			if [ "$(uname -m)" != "s390x" ]; then
-				echo "Packages for SLES are currently only available for s390x"
-				exit 1
-			fi
-			repo_file_url="$DOWNLOAD_URL/linux/$lsb_dist/$REPO_FILE"
-			pre_reqs="ca-certificates curl libseccomp2 awk"
-			(
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "zypper install -y $pre_reqs"
-				$sh_c "zypper addrepo $repo_file_url"
-				if ! is_dry_run; then
-						cat >&2 <<-'EOF'
-						WARNING!!
-						openSUSE repository (https://download.opensuse.org/repositories/security:/SELinux) will be enabled now.
-						Do you wish to continue?
-						You may press Ctrl+C now to abort this script.
-						EOF
-						( set -x; sleep 30 )
-				fi
-				opensuse_repo="https://download.opensuse.org/repositories/security:/SELinux/openSUSE_Factory/security:SELinux.repo"
-				$sh_c "zypper addrepo $opensuse_repo"
-				$sh_c "zypper --gpg-auto-import-keys refresh"
-				$sh_c "zypper lr -d"
-			)
-			pkg_version=""
-			if [ -n "$VERSION" ]; then
-				if is_dry_run; then
-					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
-				else
-					pkg_pattern="$(echo "$VERSION" | sed 's/-ce-/\\\\.ce.*/g' | sed 's/-/.*/g')"
-					search_command="zypper search -s --match-exact 'docker-ce' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
-					pkg_version="$($sh_c "$search_command")"
-					echo "INFO: Searching repository for VERSION '$VERSION'"
-					echo "INFO: $search_command"
-					if [ -z "$pkg_version" ]; then
-						echo
-						echo "ERROR: '$VERSION' not found amongst zypper list results"
-						echo
-						exit 1
-					fi
-					search_command="zypper search -s --match-exact 'docker-ce-cli' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
-					# It's okay for cli_pkg_version to be blank, since older versions don't support a cli package
-					cli_pkg_version="$($sh_c "$search_command")"
-					pkg_version="-$pkg_version"
-				fi
-			fi
-			(
-				pkgs="docker-ce$pkg_version"
-				if version_gte "18.09"; then
-					if [ -n "$cli_pkg_version" ]; then
-						# older versions didn't ship the cli and containerd as separate packages
-						pkgs="$pkgs docker-ce-cli-$cli_pkg_version containerd.io"
-					else
-						pkgs="$pkgs docker-ce-cli containerd.io"
-					fi
-				fi
-				if version_gte "20.10"; then
-					pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
-				fi
-				if version_gte "23.0"; then
-						pkgs="$pkgs docker-buildx-plugin"
-				fi
-				if ! is_dry_run; then
-					set -x
-				fi
-				$sh_c "zypper -q install -y $pkgs"
-			)
-			echo_docker_as_nonroot
-			exit 0
-			;;
-		*)
-			if [ -z "$lsb_dist" ]; then
-				if is_darwin; then
-					echo
-					echo "ERROR: Unsupported operating system 'macOS'"
-					echo "Please get Docker Desktop from https://www.docker.com/products/docker-desktop"
-					echo
-					exit 1
-				fi
-			fi
-			echo
-			echo "ERROR: Unsupported distribution '$lsb_dist'"
-			echo
-			exit 1
-			;;
-	esac
-	exit 1
-}
-
-# wrapped up in a function so that we have some protection against only getting
-# half the file during "curl | sh"
-do_install

openhands/server/github.py

@@ -1,10 +1,12 @@
 import os
 
-import httpx
+from github import Github
+from github.GithubException import GithubException
 from tenacity import retry, stop_after_attempt, wait_exponential
 
 from openhands.core.logger import openhands_logger as logger
 from openhands.server.sheets_client import GoogleSheetsClient
+from openhands.utils.async_utils import call_sync_from_async
 
 GITHUB_CLIENT_ID = os.getenv('GITHUB_CLIENT_ID', '').strip()
 GITHUB_CLIENT_SECRET = os.getenv('GITHUB_CLIENT_SECRET', '').strip()
@@ -113,24 +115,13 @@ async def get_github_user(token: str) -> str:
         github handle of the user
     """
     logger.info('Fetching GitHub user info from token')
-    headers = {
-        'Accept': 'application/vnd.github+json',
-        'Authorization': f'Bearer {token}',
-    }
-    async with httpx.AsyncClient(
-        timeout=httpx.Timeout(connect=5.0, read=5.0, write=5.0, pool=5.0)
-    ) as client:
-        try:
-            response = await client.get('https://api.github.com/user', headers=headers)
-        except httpx.RequestError as e:
-            logger.error(f'Error making request to GitHub API: {str(e)}')
-            logger.error(e)
-            raise
-
-        logger.info('Received response from GitHub API')
-        logger.debug(f'Response status code: {response.status_code}')
-        response.raise_for_status()
-        user_data = response.json()
-        login = user_data.get('login')
+    try:
+        g = Github(token)
+        user = await call_sync_from_async(g.get_user)
+        login = user.login
         logger.info(f'Successfully retrieved GitHub user: {login}')
         return login
+    except GithubException as e:
+        logger.error(f'Error making request to GitHub API: {str(e)}')
+        logger.error(e)
+        raise

pyproject.toml

@@ -28,7 +28,7 @@ uvicorn = "*"
 types-toml = "*"
 numpy = "*"
 json-repair = "*"
-browsergym = "0.13.0" # integrate browsergym as the browsing interface
+browsergym = "0.10.2" # integrate browsergym as the browsing interface
 html2text = "*"
 e2b = "^0.17.1"
 pexpect = "*"
@@ -37,7 +37,7 @@ python-multipart = "*"
 boto3 = "*"
 minio = "^7.2.8"
 gevent = "^24.2.1"
-pyarrow = "18.0.0" # transitive dependency, pinned here to avoid conflicts
+pyarrow = "17.0.0" # transitive dependency, pinned here to avoid conflicts
 tenacity = "^8.5.0"
 zope-interface = "7.1.1"
 pathspec = "^0.12.1"
@@ -60,20 +60,21 @@ whatthepatch = "^1.0.6"
 protobuf = "^4.21.6,<5.0.0" # chromadb currently fails on 5.0+
 opentelemetry-api = "1.25.0"
 opentelemetry-exporter-otlp-proto-grpc = "1.25.0"
-modal = ">=0.64.145,<0.66.0"
-runloop-api-client = "0.10.0"
+modal = "^0.64.145"
+runloop-api-client = "0.7.0"
+pygithub = "^2.5.0"
 
 [tool.poetry.group.llama-index.dependencies]
 llama-index = "*"
 llama-index-vector-stores-chroma = "*"
 chromadb = "*"
 llama-index-embeddings-huggingface = "*"
-torch = "2.5.1"
+torch = "2.5.0"
 llama-index-embeddings-azure-openai = "*"
 llama-index-embeddings-ollama = "*"
 
 [tool.poetry.group.dev.dependencies]
-ruff = "0.7.3"
+ruff = "0.7.1"
 mypy = "1.13.0"
 pre-commit = "4.0.1"
 build = "*"
@@ -93,6 +94,7 @@ reportlab = "*"
 [tool.coverage.run]
 concurrency = ["gevent"]
 
+
 [tool.poetry.group.runtime.dependencies]
 jupyterlab = "*"
 notebook = "*"
@@ -123,6 +125,7 @@ ignore = ["D1"]
 [tool.ruff.lint.pydocstyle]
 convention = "google"
 
+
 [tool.poetry.group.evaluation.dependencies]
 streamlit = "*"
 whatthepatch = "*"

tests/unit/test_runtime_build.py

@@ -544,59 +544,83 @@ def _format_size_to_gb(bytes_size):
 
 
 def test_list_dangling_images():
-    mock_client = MagicMock()
-    mock_client.images.list.return_value = []
-    with patch('docker.from_env', return_value=mock_client):
-        client = docker.from_env()
-        dangling_images = client.images.list(filters={'dangling': True})
-        assert len(dangling_images) == 0
+    client = docker.from_env()
+    dangling_images = client.images.list(filters={'dangling': True})
+    if dangling_images and len(dangling_images) > 0:
+        for image in dangling_images:
+            if 'Size' in image.attrs and isinstance(image.attrs['Size'], int):
+                size_gb = _format_size_to_gb(image.attrs['Size'])
+                logger.info(f'Dangling image: {image.tags}, Size: {size_gb} GB')
+            else:
+                logger.info(f'Dangling image: {image.tags}, Size: n/a')
+    else:
+        logger.info('No dangling images found')
 
 
-def test_build_image_from_repo(tmp_path):
-    mock_client = MagicMock()
-    mock_client.images.build.return_value = (MagicMock(), [])
-    with patch('docker.from_env', return_value=mock_client):
-        docker_runtime_builder = DockerRuntimeBuilder(mock_client)
-        context_path = str(tmp_path)
-        tags = ['alpine:latest']
+def test_build_image_from_repo(docker_runtime_builder, tmp_path):
+    context_path = str(tmp_path)
+    tags = ['alpine:latest']
 
-        # Create a minimal Dockerfile in the context path
-        with open(os.path.join(context_path, 'Dockerfile'), 'w') as f:
-            f.write(f"""FROM {DEFAULT_BASE_IMAGE}
+    # Create a minimal Dockerfile in the context path
+    with open(os.path.join(context_path, 'Dockerfile'), 'w') as f:
+        f.write(f"""FROM {DEFAULT_BASE_IMAGE}
 CMD ["sh", "-c", "echo 'Hello, World!'"]
 """)
-
-        # Build the image
-        built_image_name = docker_runtime_builder.build(context_path, tags=tags)
-        assert built_image_name == tags[0]
-        mock_client.images.build.assert_called_once_with(
-            path=context_path,
-            tag=tags[0],
-            rm=True,
-            forcerm=True,
-            platform=None,
-            decode=True,
+    built_image_name = None
+    container = None
+    client = docker.from_env()
+    try:
+        built_image_name = docker_runtime_builder.build(
+            context_path,
+            tags,
+            use_local_cache=False,
         )
+        assert built_image_name == f'{tags[0]}'
+
+        image = client.images.get(tags[0])
+        assert image is not None
+
+    except docker.errors.ImageNotFound:
+        pytest.fail('test_build_image_from_repo: test image not found!')
+
+    finally:
+        # Clean up the container
+        if container:
+            try:
+                container.remove(force=True)
+                logger.info(f'Removed test container: `{container.id}`')
+            except Exception as e:
+                logger.warning(
+                    f'Failed to remove test container `{container.id}`: {str(e)}'
+                )
+
+        # Clean up the image
+        if built_image_name:
+            try:
+                client.images.remove(built_image_name, force=True)
+                logger.info(f'Removed test image: `{built_image_name}`')
+            except Exception as e:
+                logger.warning(
+                    f'Failed to remove test image `{built_image_name}`: {str(e)}'
+                )
+        else:
+            logger.warning('No image was built, so no image cleanup was necessary.')
 
 
-def test_image_exists_local():
+def test_image_exists_local(docker_runtime_builder):
     mock_client = MagicMock()
-    mock_client.images.get.return_value = MagicMock()
-    with patch('docker.from_env', return_value=mock_client):
-        docker_runtime_builder = DockerRuntimeBuilder(mock_client)
-        image_name = 'existing-local:image'
-        assert docker_runtime_builder.image_exists(image_name)
-        mock_client.images.get.assert_called_once_with(image_name)
+    mock_client.version().get.return_value = '18.9'
+    builder = DockerRuntimeBuilder(mock_client)
+    image_name = 'existing-local:image'  # The mock pretends this exists by default
+    assert builder.image_exists(image_name)
 
 
 def test_image_exists_not_found():
     mock_client = MagicMock()
-    mock_client.images.get.side_effect = docker.errors.ImageNotFound('not found')
-    with patch('docker.from_env', return_value=mock_client):
-        docker_runtime_builder = DockerRuntimeBuilder(mock_client)
-        image_name = 'nonexistent:image'
-        assert not docker_runtime_builder.image_exists(image_name)
-        mock_client.images.get.assert_called_once_with(image_name)
+    mock_client.version().get.return_value = '18.9'
+    mock_client.images.get.side_effect = docker.errors.ImageNotFound(
+        "He doesn't like you!"
+    )
     mock_client.api.pull.side_effect = docker.errors.ImageNotFound(
         "I don't like you either!"
     )

tests/unit/test_security.py

@@ -49,56 +49,24 @@ def add_events(event_stream: EventStream, data: list[tuple[Event, EventSource]])
 
 
 def test_msg(temp_dir: str):
-    mock_container = MagicMock()
-    mock_container.status = 'running'
-    mock_container.attrs = {
-        'NetworkSettings': {'Ports': {'8000/tcp': [{'HostPort': 34567}]}}
-    }
-    mock_docker = MagicMock()
-    mock_docker.from_env().containers.list.return_value = [mock_container]
-
-    mock_requests = MagicMock()
-    mock_requests.get().json.return_value = {'id': 'mock-session-id'}
-    mock_requests.post().json.side_effect = [
-        {'monitor_id': 'mock-monitor-id'},
-        [],
-        [],
-        [],
-        [],
-        [],
-        [],
-        [],
-        [
-            'PolicyViolation(Disallow ABC [risk=medium], ranges=[<2 ranges>])'
-        ],
+    file_store = get_file_store('local', temp_dir)
+    event_stream = EventStream('main', file_store)
+    policy = """
+    raise "Disallow ABC [risk=medium]" if:
+        (msg: Message)
+        "ABC" in msg.content
+    """
+    InvariantAnalyzer(event_stream, policy)
+    data = [
+        (MessageAction('Hello world!'), EventSource.USER),
+        (MessageAction('AB!'), EventSource.AGENT),
+        (MessageAction('Hello world!'), EventSource.USER),
+        (MessageAction('ABC!'), EventSource.AGENT),
     ]
-
-    with (
-        patch(f'{InvariantAnalyzer.__module__}.docker', mock_docker),
-        patch(f'{InvariantClient.__module__}.requests', mock_requests),
-    ):
-        file_store = get_file_store('local', temp_dir)
-        event_stream = EventStream('main', file_store)
-        policy = """
-        raise "Disallow ABC [risk=medium]" if:
-            (msg: Message)
-            "ABC" in msg.content
-        """
-        analyzer = InvariantAnalyzer(event_stream, policy)
-        data = [
-            (MessageAction('Hello world!'), EventSource.USER),
-            (MessageAction('AB!'), EventSource.AGENT),
-            (MessageAction('Hello world!'), EventSource.USER),
-            (MessageAction('ABC!'), EventSource.AGENT),
-        ]
-        for event, source in data:
-            event.security_risk = ActionSecurityRisk.LOW
-            event_stream.add_event(event, source)
-            if event.content == 'ABC!':
-                event.security_risk = ActionSecurityRisk.MEDIUM
-        for i in range(3):
-            assert data[i][0].security_risk == ActionSecurityRisk.LOW
-        assert data[3][0].security_risk == ActionSecurityRisk.MEDIUM
+    add_events(event_stream, data)
+    for i in range(3):
+        assert data[i][0].security_risk == ActionSecurityRisk.LOW
+    assert data[3][0].security_risk == ActionSecurityRisk.MEDIUM
 
 
 @pytest.mark.parametrize(
@@ -106,51 +74,22 @@ def test_msg(temp_dir: str):
     [('rm -rf root_dir', ActionSecurityRisk.MEDIUM), ['ls', ActionSecurityRisk.LOW]],
 )
 def test_cmd(cmd, expected_risk, temp_dir: str):
-    mock_container = MagicMock()
-    mock_container.status = 'running'
-    mock_container.attrs = {
-        'NetworkSettings': {'Ports': {'8000/tcp': [{'HostPort': 34567}]}}
-    }
-    mock_docker = MagicMock()
-    mock_docker.from_env().containers.list.return_value = [mock_container]
-
-    mock_requests = MagicMock()
-    mock_requests.get().json.return_value = {'id': 'mock-session-id'}
-    mock_requests.post().json.side_effect = [
-        {'monitor_id': 'mock-monitor-id'},
-        [],
-        [],
-        [],
-        [
-            'PolicyViolation(Disallow rm -rf [risk=medium], ranges=[<2 ranges>])'
-            if expected_risk == ActionSecurityRisk.MEDIUM else []
-        ],
+    file_store = get_file_store('local', temp_dir)
+    event_stream = EventStream('main', file_store)
+    policy = """
+    raise "Disallow rm -rf [risk=medium]" if:
+        (call: ToolCall)
+        call is tool:run
+        match("rm -rf", call.function.arguments.command)
+    """
+    InvariantAnalyzer(event_stream, policy)
+    data = [
+        (MessageAction('Hello world!'), EventSource.USER),
+        (CmdRunAction(cmd), EventSource.USER),
     ]
-
-    with (
-        patch(f'{InvariantAnalyzer.__module__}.docker', mock_docker),
-        patch(f'{InvariantClient.__module__}.requests', mock_requests),
-    ):
-        file_store = get_file_store('local', temp_dir)
-        event_stream = EventStream('main', file_store)
-        policy = """
-        raise "Disallow rm -rf [risk=medium]" if:
-            (call: ToolCall)
-            call is tool:run
-            match("rm -rf", call.function.arguments.command)
-        """
-        analyzer = InvariantAnalyzer(event_stream, policy)
-        data = [
-            (MessageAction('Hello world!'), EventSource.USER),
-            (CmdRunAction(cmd), EventSource.USER),
-        ]
-        for event, source in data:
-            event.security_risk = ActionSecurityRisk.LOW
-            event_stream.add_event(event, source)
-            if isinstance(event, CmdRunAction) and 'rm -rf' in event.command:
-                event.security_risk = ActionSecurityRisk.MEDIUM
-        assert data[0][0].security_risk == ActionSecurityRisk.LOW
-        assert data[1][0].security_risk == expected_risk
+    add_events(event_stream, data)
+    assert data[0][0].security_risk == ActionSecurityRisk.LOW
+    assert data[1][0].security_risk == expected_risk
 
 
 @pytest.mark.parametrize(
@@ -161,57 +100,26 @@ def test_cmd(cmd, expected_risk, temp_dir: str):
     ],
 )
 def test_leak_secrets(code, expected_risk, temp_dir: str):
-    mock_container = MagicMock()
-    mock_container.status = 'running'
-    mock_container.attrs = {
-        'NetworkSettings': {'Ports': {'8000/tcp': [{'HostPort': 34567}]}}
-    }
-    mock_docker = MagicMock()
-    mock_docker.from_env().containers.list.return_value = [mock_container]
+    file_store = get_file_store('local', temp_dir)
+    event_stream = EventStream('main', file_store)
+    policy = """
+    from invariant.detectors import secrets
 
-    mock_requests = MagicMock()
-    mock_requests.get().json.return_value = {'id': 'mock-session-id'}
-    mock_requests.post().json.side_effect = [
-        {'monitor_id': 'mock-monitor-id'},
-        [],
-        [],
-        [],
-        [],
-        [],
-        [
-            'PolicyViolation(Disallow writing secrets [risk=medium], ranges=[<2 ranges>])'
-            if expected_risk == ActionSecurityRisk.MEDIUM else []
-        ],
+    raise "Disallow writing secrets [risk=medium]" if:
+        (call: ToolCall)
+        call is tool:run_ipython
+        any(secrets(call.function.arguments.code))
+    """
+    InvariantAnalyzer(event_stream, policy)
+    data = [
+        (MessageAction('Hello world!'), EventSource.USER),
+        (IPythonRunCellAction(code), EventSource.AGENT),
+        (IPythonRunCellAction('hello'), EventSource.AGENT),
     ]
-
-    with (
-        patch(f'{InvariantAnalyzer.__module__}.docker', mock_docker),
-        patch(f'{InvariantClient.__module__}.requests', mock_requests),
-    ):
-        file_store = get_file_store('local', temp_dir)
-        event_stream = EventStream('main', file_store)
-        policy = """
-        from invariant.detectors import secrets
-
-        raise "Disallow writing secrets [risk=medium]" if:
-            (call: ToolCall)
-            call is tool:run_ipython
-            any(secrets(call.function.arguments.code))
-        """
-        analyzer = InvariantAnalyzer(event_stream, policy)
-        data = [
-            (MessageAction('Hello world!'), EventSource.USER),
-            (IPythonRunCellAction(code), EventSource.AGENT),
-            (IPythonRunCellAction('hello'), EventSource.AGENT),
-        ]
-        for event, source in data:
-            event.security_risk = ActionSecurityRisk.LOW
-            event_stream.add_event(event, source)
-            if isinstance(event, IPythonRunCellAction) and 'AKIAIOSFODNN7EXAMPLE' in event.code:
-                event.security_risk = ActionSecurityRisk.MEDIUM
-        assert data[0][0].security_risk == ActionSecurityRisk.LOW
-        assert data[1][0].security_risk == expected_risk
-        assert data[2][0].security_risk == ActionSecurityRisk.LOW
+    add_events(event_stream, data)
+    assert data[0][0].security_risk == ActionSecurityRisk.LOW
+    assert data[1][0].security_risk == expected_risk
+    assert data[2][0].security_risk == ActionSecurityRisk.LOW
 
 
 def test_unsafe_python_code(temp_dir: str):