Update documentation requirements

The hip-devel package depends on perl modules not distributed by default
on RHEL and SLES distriubutions, these can be installed from EPEL and
the `devel:languages:perl` repository respectively.

Ideally in the future these dependencies would be replaced with packages
available from default repositories, but in the meanwhile this should
be at least documented.

.github/CODEOWNERS

@@ -0,0 +1 @@
+* @saadrahim @Rmalavally @amd-aakash @zhang2amd @jlgreathouse @samjwu @MathiasMagnus

.github/dependabot.yml

@@ -0,0 +1,12 @@
+# To get started with Dependabot version updates, you'll need to specify which
+# package ecosystems to update and where the package manifests are located.
+# Please see the documentation for all configuration options:
+# https://docs.github.com/github/administering-a-repository/configuration-options-for-dependency-updates
+
+version: 2
+updates:
+  - package-ecosystem: "pip" # See documentation for possible values
+    directory: "/docs/sphinx" # Location of package manifests
+    open-pull-requests-limit: 10
+    schedule:
+      interval: "daily"

.github/workflows/linting.yml

@@ -0,0 +1,56 @@
+name: Linting
+
+on:
+  push:
+    branches: 
+    - develop
+    - main
+  pull_request:
+    branches: 
+    - develop
+    - main
+
+concurrency:
+  group: ${{ github.ref }}-${{ github.workflow }}
+  cancel-in-progress: true
+
+jobs:
+  lint-rest:
+    name: "RestructuredText"
+    runs-on: ubuntu-latest
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v3
+    - name: Install rst-lint
+      run: pip install restructuredtext-lint
+    - name: Lint ResT files
+      run: rst-lint ${{ join(github.workspace, '/docs') }}
+
+  lint-md:
+    name: "Markdown"
+    runs-on: ubuntu-latest
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v3
+    - name: Use markdownlint-cli2
+      uses: DavidAnson/markdownlint-cli2-action@v10.0.1
+      with:
+        globs: '**/*.md'
+
+  spelling:
+    name: "Spelling"
+    runs-on: ubuntu-latest
+    steps:
+    - name: Checkout code
+      uses: actions/checkout@v3
+    - name: Fetch config
+      shell: sh
+      run: |
+        curl --silent --show-error --fail --location https://raw.github.com/RadeonOpenCompute/rocm-docs-core/develop/.spellcheck.yaml -O
+        curl --silent --show-error --fail --location https://raw.github.com/RadeonOpenCompute/rocm-docs-core/develop/.wordlist.txt >> .wordlist.txt
+    - name: Run spellcheck
+      uses: rojopolis/spellcheck-github-actions@0.30.0
+    - name: On fail
+      if: failure()
+      run: |
+        echo "Please check for spelling mistakes or add them to '.wordlist.txt' in either the root of this project or in rocm-docs-core."

.gitignore

@@ -0,0 +1,18 @@
+.venv
+.vscode
+build
+
+# documentation artifacts
+_build/
+_images/
+_static/
+_templates/
+_toc.yml
+docBin/
+_doxygen/
+_readthedocs/
+
+# avoid duplicating contributing.md due to conf.py
+docs/contributing.md
+docs/release.md
+docs/CHANGELOG.md

.markdownlint-cli2.yaml

@@ -0,0 +1,14 @@
+config:
+  default: true
+  MD013: false
+  MD026:
+    punctuation: '.,;:!'
+  MD029:
+    style: ordered
+  MD033: false
+  MD034: false
+  MD041: false
+ignores:
+  - CHANGELOG.md
+  - "{,docs/}{RELEASE,release}.md"
+  - tools/autotag/templates/**/*.md

.readthedocs.yaml

@@ -0,0 +1,21 @@
+# Read the Docs configuration file
+# See https://docs.readthedocs.io/en/stable/config-file/v2.html for details
+
+version: 2
+
+build:
+   os: ubuntu-22.04
+   tools:
+      python: "3.10"
+   apt_packages:
+     - "doxygen"
+     - "graphviz" # For dot graphs in doxygen
+
+python:
+   install:
+   - requirements: docs/sphinx/requirements.txt
+
+sphinx:
+   configuration: docs/conf.py
+
+formats: []

.wordlist.txt

@@ -0,0 +1,29 @@
+# isv_deployment_win
+ABI
+# gpu_aware_mpi
+DMA
+GDR
+HCA
+MPI
+MVAPICH
+Mellanox's
+NIC
+OFED
+OSU
+OpenFabrics
+PeerDirect
+RDMA
+UCX
+ib_core
+# linear algebra
+LAPACK
+MMA
+backends
+cuSOLVER
+cuSPARSE
+# tuning_guides
+BMC
+DGEMM
+HPCG
+HPL
+IOPM

CONTRIBUTING.md

@@ -0,0 +1,246 @@
+# Contributing to ROCm Docs
+
+AMD values and encourages the ROCm community to contribute to our code and
+documentation. This repository is focused on ROCm documentation and this
+contribution guide describes the recommend method for creating and modifying our
+documentation.
+
+While interacting with ROCm Documentation, we encourage you to be polite and
+respectful in your contributions, content or otherwise. Authors, maintainers of
+these docs act on good intentions and to the best of their knowledge.
+Keep that in mind while you engage. Should you have issues with contributing
+itself, refer to
+[discussions](https://github.com/RadeonOpenCompute/ROCm/discussions) on the
+GitHub repository.
+
+## Supported Formats
+
+Our documentation includes both markdown and rst files. Markdown is encouraged
+over rst due to the lower barrier to participation. GitHub flavored markdown is preferred
+for all submissions as it will render accurately on our GitHub repositories. For existing documentation,
+[MyST](https://myst-parser.readthedocs.io/en/latest/intro.html) markdown
+is used to implement certain features unsupported in GitHub markdown. This is
+not encouraged for new documentation. AMD will transition
+to stricter use of GitHub flavored markdown with a few caveats. ROCm documentation
+also uses [sphinx-design](https://sphinx-design.readthedocs.io/en/latest/index.html)
+in our markdown and rst files. We also will use breathe syntax for doxygen documentation
+in our markdown files. Other design elements for effective HTML rendering of the documents
+may be added to our markdown files. Please see
+[GitHub](https://docs.github.com/en/get-started/writing-on-github/getting-started-with-writing-and-formatting-on-github)'s
+guide on writing and formatting on GitHub as a starting point.
+
+ROCm documentation adds additional requirements to markdown and rst based files
+as follows:
+
+- Level one headers are only used for page titles. There must be only one level
+  1 header per file for both Markdown and Restructured Text.
+- Pass [markdownlint](https://github.com/markdownlint/markdownlint) check via
+  our automated github action on a Pull Request (PR).
+
+## Filenames and folder structure
+
+Please use snake case for file names. Our documentation follows pitchfork for
+folder structure. All documentation is in /docs except for special files like
+the contributing guide in the / folder. All images used in the documentation are
+place in the /docs/data folder.
+
+## How to provide feedback for for ROCm documentation
+
+There are three standard ways to provide feedback for this repository.
+
+### Pull Request
+
+All contributions to ROCm documentation should arrive via the
+[GitHub Flow](https://docs.github.com/en/get-started/quickstart/github-flow)
+targetting the develop branch of the repository. If you are unable to contribute
+via the GitHub Flow, feel free to email us. TODO, confirm email address.
+
+### GitHub Issue
+
+Issues on existing or absent docs can be filed as [GitHub issues
+](https://github.com/RadeonOpenCompute/ROCm/issues).
+
+### Email Feedback
+
+## Language and Style
+
+Adopting Microsoft CPP-Docs guidelines for [Voice and Tone
+](https://github.com/MicrosoftDocs/cpp-docs/blob/main/styleguide/voice-tone.md).
+
+ROCm documentation templates to be made public shortly. ROCm templates dictate
+the recommended structure and flow of the documentation. Guidelines on how to
+integrate figures, equations, and tables are all based off
+[MyST](https://myst-parser.readthedocs.io/en/latest/intro.html).
+
+Font size and selection, page layout, white space control, and other formatting
+details are controlled via rocm-docs-core, sphinx extention. Please raise issues
+in rocm-docs-core for any formatting concerns and changes requested.
+
+## Building Documentation
+
+While contributing, one may build the documentation locally on the command-line
+or rely on Continuous Integration for previewing the resulting HTML pages in a
+browser.
+
+### Command line documentation builds
+
+Python versions known to build documentation:
+
+- 3.8
+
+To build the docs locally using Python Virtual Environment (`venv`), execute the
+following commands from the project root:
+
+```sh
+python3 -mvenv .venv
+# Windows
+.venv/Scripts/python -m pip install -r docs/sphinx/requirements.txt
+.venv/Scripts/python -m sphinx -T -E -b html -d _build/doctrees -D language=en docs _build/html
+# Linux
+.venv/bin/python     -m pip install -r docs/sphinx/requirements.txt
+.venv/bin/python     -m sphinx -T -E -b html -d _build/doctrees -D language=en docs _build/html
+```
+
+Then open up `_build/html/index.html` in your favorite browser.
+
+### Pull Requests documentation builds
+
+When opening a PR to the `develop` branch on GitHub, the page corresponding to
+the PR (`https://github.com/RadeonOpenCompute/ROCm/pull/<pr_number>`) will have
+a summary at the bottom. This requires the user be logged in to GitHub.
+
+- There, click `Show all checks` and `Details` of the Read the Docs pipeline. It
+  will take you to `https://readthedocs.com/projects/advanced-micro-devices-rocm/
+  builds/<some_build_num>/`
+  - The list of commands shown are the exact ones used by CI to produce a render
+    of the documentation.
+- There, click on the small blue link `View docs` (which is not the same as the
+  bigger button with the same text). It will take you to the built HTML site with
+  a URL of the form `https://
+  advanced-micro-devices-demo--<pr_number>.com.readthedocs.build/projects/alpha/en
+  /<pr_number>/`.
+
+### Build the docs using VS Code
+
+One can put together a productive environment to author documentation and also
+test it locally using VS Code with only a handful of extensions. Even though the
+extension landscape of VS Code is ever changing, here is one example setup that
+proved useful at the time of writing. In it, one can change/add content, build a
+new version of the docs using a single VS Code Task (or hotkey), see all errors/
+warnings emitted by Sphinx in the Problems pane and immediately see the
+resulting website show up on a locally serving web server.
+
+#### Configuring VS Code
+
+1. Install the following extensions:
+
+    - Python (ms-python.python)
+    - Live Server (ritwickdey.LiveServer)
+
+2. Add the following entries in `.vscode/settings.json`
+
+    ```json
+    {
+      "liveServer.settings.root": "/.vscode/build/html",
+      "liveServer.settings.wait": 1000,
+      "python.terminal.activateEnvInCurrentTerminal": true
+    }
+    ```
+
+    The settings in order are set for the following reasons:
+    - Sets the root of the output website for live previews. Must be changed
+      alongside the `tasks.json` command.
+    - Tells live server to wait with the update to give time for Sphinx to
+      regenerate site contents and not refresh before all is don. (Empirical value)
+    - Automatic virtual env activation is a nice touch, should you want to build
+      the site from the integrated terminal.
+
+3. Add the following tasks in `.vscode/tasks.json`
+
+    ```json
+    {
+      "version": "2.0.0",
+      "tasks": [
+        {
+          "label": "Build Docs",
+          "type": "process",
+          "windows": {
+            "command": "${workspaceFolder}/.venv/Scripts/python.exe"
+          },
+          "command": "${workspaceFolder}/.venv/bin/python3",
+          "args": [
+            "-m",
+            "sphinx",
+            "-j",
+            "auto",
+            "-T",
+            "-b",
+            "html",
+            "-d",
+            "${workspaceFolder}/.vscode/build/doctrees",
+            "-D",
+            "language=en",
+            "${workspaceFolder}/docs",
+            "${workspaceFolder}/.vscode/build/html"
+          ],
+          "problemMatcher": [
+            {
+              "owner": "sphinx",
+              "fileLocation": "absolute",
+              "pattern": {
+                "regexp": "^(?:.*\\.{3}\\s+)?(\\/[^:]*|[a-zA-Z]:\\\\[^:]*):(\\d+):\\s+(WARNING|ERROR):\\s+(.*)$",
+                "file": 1,
+                "line": 2,
+                "severity": 3,
+                "message": 4
+              },
+            },
+            {
+              "owner": "sphinx",
+              "fileLocation": "absolute",
+              "pattern": {
+                "regexp": "^(?:.*\\.{3}\\s+)?(\\/[^:]*|[a-zA-Z]:\\\\[^:]*):{1,2}\\s+(WARNING|ERROR):\\s+(.*)$",
+                "file": 1,
+                "severity": 2,
+                "message": 3
+              }
+            }
+          ],
+          "group": {
+            "kind": "build",
+            "isDefault": true
+          }
+        },
+      ],
+    }
+    ```
+
+    > (Implementation detail: two problem matchers were needed to be defined,
+    > because VS Code doesn't tolerate some problem information being potentially
+    > absent. While a single regex could match all types of errors, if a capture
+    > group remains empty (the line number doesn't show up in all warning/error
+    > messages) but the `pattern` references said empty capture group, VS Code
+    > discards the message completely.)
+
+4. Configure Python virtual environment (venv)
+
+    - From the Command Palette, run `Python: Create Environment`
+      - Select `venv` environment and the `docs/sphinx/requirements.txt` file.
+      _(Simply pressing enter while hovering over the file from the dropdown is
+      insufficient, one has to select the radio button with the 'Space' key if
+      using the keyboard.)_
+
+5. Build the docs
+
+    - Launch the default build Task using either:
+      - a hotkey _(default is 'Ctrl+Shift+B')_ or
+      - by issuing the `Tasks: Run Build Task` from the Command Palette.
+
+6. Open the live preview
+
+    - Navigate to the output of the site within VS Code, right-click on
+    `.vscode/build/html/index.html` and select `Open with Live Server`. The
+    contents should update on every rebuild without having to refresh the
+    browser.
+
+<!-- markdownlint-restore -->

LICENSE

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2023 Advanced Micro Devices, Inc. All rights reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

README.md

@@ -1,426 +1,54 @@
-## Are You Ready to ROCK?
-The ROCm Platform brings a rich foundation to advanced computing by seamlessly
- integrating the CPU and GPU with the goal of solving real-world problems.
+# AMD ROCm™ Platform
 
-#### Supported CPUs
+ROCm™ is an open-source stack for GPU computation. ROCm is primarily Open-Source
+Software (OSS) that allows developers the freedom to customize and tailor their
+GPU software for their own needs while collaborating with a community of other
+developers, and helping each other find solutions in an agile, flexible, rapid
+and secure manner.
 
+ROCm is a collection of drivers, development tools and APIs enabling GPU
+programming from the low-level kernel to end-user applications. ROCm is powered
+by AMD’s Heterogeneous-computing Interface for Portability (HIP), an OSS C++ GPU
+programming environment and its corresponding runtime. HIP allows ROCm
+developers to create portable applications on different platforms by deploying
+code on a range of platforms, from dedicated gaming GPUs to exascale HPC
+clusters. ROCm supports programming models such as OpenMP and OpenCL, and
+includes all the necessary OSS compilers, debuggers and libraries. ROCm is fully
+integrated into ML frameworks such as PyTorch and TensorFlow. ROCm can be
+deployed in many ways, including through the use of containers such as Docker,
+Spack, and your own build from source.
 
-Starting with ROCm 1.8 we have relaxed the use of PCIe Atomics and also PCIe lane choice for Vega10/GFX9 class GPU.  So now you can support CPU without PCIe Atomics and also use Gen2 x1 lanes. 
+ROCm’s goal is to allow our users to maximize their GPU hardware investment.
+ROCm is designed to help develop, test and deploy GPU accelerated HPC, AI,
+scientific computing, CAD, and other applications in a free, open-source,
+integrated and secure software ecosystem.
 
-Currently our GFX8 GPU's (Fiji & Polaris family) still need to use PCIe Gen 3 and PCIe Atomics, but are looking at relaxing this in a future release, once we have fully tested firmware. 
+This repository contains the manifest file for ROCm™ releases, changelogs, and
+release information. The file default.xml contains information for all
+repositories and the associated commit used to build the current ROCm release.
 
+The default.xml file uses the repo Manifest format.
 
-Current CPUs which support PCIe Gen3 + PCIe Atomics are: 
-  * AMD Ryzen CPUs;
-  * AMD EPYC CPUs;  
-  * Intel Xeon E7 V3  or newer CPUs;
-  * Intel Xeon E5 v3 or newer CPUs; 
-  * Intel Xeon E3 v3 or newer CPUs; 
-  * Intel Core i7 v4, Core i5 v4, Core i3 v4 or newer CPUs (i.e. Haswell family or newer).
+The develop branch of this repository contains content for the next
+ROCm release.
 
-For Fiji and Polaris GPU's the ROCm platform leverages PCIe Atomics (Fetch and Add, Compare and Swap, 
-Unconditional Swap, AtomicsOp Completion).
-PCIe Atomics are only supported on PCIe Gen3 enabled CPUs and PCIe Gen3 switches like
-Broadcom PLX. When you install your GPUs make sure you install them in a fully
-PCIe Gen3 x16 or x8, x4 or x1  slot attached either directly to the CPU's Root I/O 
-controller or via a PCIe switch directly attached to the CPU's Root I/O 
-controller. In our experience many issues stem from trying to use consumer 
-motherboards which provide physical x16 connectors that are electrically 
-connected as e.g. PCIe Gen2 x4 connected via the 
-Southbridge PCIe I/O controller. 
- 
+## ROCm Documentation
 
-Experimental support for our GFX7 GPUs Radeon R9 290, R9 390, AMD FirePro S9150, S9170 note they do not support or
-take advantage of PCIe Atomics. However, we still recommend that you use a CPU
-from the list provided above. 
+ROCm Documentation is available online at
+[rocm.docs.amd.com](https://rocm.docs.amd.com). Source code for the documenation
+is located in the docs folder of most repositories that are part of ROCm.
 
-#### Not supported or very limited support under ROCm 
-###### Limited support 
+### How to build documentation via Sphinx
 
+```bash
+cd docs
 
-* With ROCm 1.8 and Vega10 it should support  PCIe Gen2 enabled CPUs such as the AMD Opteron, Phenom, Phenom II, Athlon, Athlon X2, Athlon II and older Intel Xeon and Intel Core Architecture and Pentium CPUs. But we have done very limited testing. Since our test farm today has been catering to CPU listed above.  This is where we need community support. 
- * Thunderbolt 1,2 and 3 enabled breakout boxes GPU's should now be able to work with ROCm. Thunderbolt 1 and 2 are PCIe Gen2 based. But we have done no testing on this config and would need comunity support do limited access to this type of equipment 
+pip3 install -r sphinx/requirements.txt
 
-###### Not supported 
-
-
-* We also do not support AMD Carrizo and Kaveri APU as host for compliant dGPU attachments.
- * Thunderbolt 1 and 2 enabled GPU's are not supported by ROCm. Thunderbolt 1 & 2 are PCIe Gen2 based.
- * AMD Carrizo based APUs have limited support due to OEM & ODM's choices when it comes to some key configuration parameters. On point, we have observed that Carrizo laptops, AIOs and desktop systems showed inconsistencies in exposing and enabling the System BIOS parameters required by the ROCm stack. Before purchasing a Carrizo system for ROCm, please verify that the BIOS provides an option for enabling IOMMUv2. If this is the case, the final requirement is associated with correct CRAT table support - please inquire with the OEM about the latter.
- * AMD Merlin/Falcon Embedded System is also not currently supported by the public repo.
- * AMD Raven Ridge APU are currently not supported
-
-
-### New features to ROCm 1.8.2
-
-#### DKMS driver installation
-
- * Debian packages are provided for DKMS on Ubuntu
- * RPM packages are provided for CentOS/RHEL 7.4 and 7.5 support
- * See the [ROCT-Thunk-Interface](https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/tree/roc-1.8.x) and [ROCK-Kernel-Driver](https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/tree/roc-1.8.x) for additional documentation on driver setup
-
-#### New distribution suppport 
-
- * Binary package support for Ubuntu 16.04
- * Binary package support for CentOS 7.4 and 7.5
- * Binary package support for RHEL 7.4 and 7.5
- 
-#### Improved OpenMPI via UCX support 
-
- * UCX support for OpenMPI
- * ROCm RDMA
-
-### The latest ROCm platform - ROCm 1.8.2
-
-The latest tested version of the drivers, tools, libraries and source code for
-the ROCm platform have been released and are available under the roc-1.8.x or rocm-1.8.x tag
-of the following GitHub repositories:
-
-* [ROCK-Kernel-Driver](https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver/tree/roc-1.8.x)
-* [ROCR-Runtime](https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/roc-1.8.x)
-* [ROCT-Thunk-Interface](https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/tree/roc-1.8.x)
-* [ROC-smi](https://github.com/RadeonOpenCompute/ROC-smi/tree/roc-1.8.x)
-* [HCC compiler](https://github.com/RadeonOpenCompute/hcc/tree/roc-1.8.x)
-* [compiler-runtime](https://github.com/RadeonOpenCompute/compiler-rt/tree/roc-1.8.x)
-* [HIP](https://github.com/GPUOpen-ProfessionalCompute-Tools/HIP/tree/roc-1.8.x)
-* [HIP-Examples](https://github.com/GPUOpen-ProfessionalCompute-Tools/HIP-Examples/tree/roc-1.8.x)
-* [atmi](https://github.com/RadeonOpenCompute/atmi/tree/0.3.7)
-
-Additionally, the following mirror repositories that support the HCC compiler
-are also available on GitHub, and frozen for the rocm-1.8.2 release:
-
-* [llvm](https://github.com/RadeonOpenCompute/llvm/tree/roc-1.8.x)
-* [ldd](https://github.com/RadeonOpenCompute/lld/tree/roc-1.8.x)
-* [hcc-clang-upgrade](https://github.com/RadeonOpenCompute/hcc-clang-upgrade/tree/roc-1.8.x)
-* [ROCm-Device-Libs](https://github.com/RadeonOpenCompute/ROCm-Device-Libs/tree/roc-1.8.x)
-
-#### Supported Operating Systems - New operating systems available
-
-The ROCm 1.8.2 platform has been tested on the following operating systems:
- * Ubuntu 16.04
- * CentOS 7.4 &. 7.5 (Using devetoolset-7 runtime support)
- * RHEL 7.4. &. 7.5  (Using devetoolset-7 runtime support)
-
-### Installing from AMD ROCm repositories
-
-AMD is hosting both Debian and RPM repositories for the ROCm 1.8.2 packages at this time.
-
-The packages in the Debian repository have been signed to ensure package integrity.
-
-#### Installing from a Debian repository
-
-##### First make sure your system is up to date 
-
-```shell
-sudo apt update
-sudo apt dist-upgrade
-sudo apt install libnuma-dev
-sudo reboot
+python3 -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html
 ```
 
-##### Add the ROCm apt repository
+## Older ROCm™ Releases
 
-For Debian based systems, like Ubuntu, configure the Debian ROCm repository as
-follows:
-
-```shell
-wget -qO - http://repo.radeon.com/rocm/apt/debian/rocm.gpg.key | sudo apt-key add -
-sudo sh -c 'echo deb [arch=amd64] http://repo.radeon.com/rocm/apt/debian/ xenial main > /etc/apt/sources.list.d/rocm.list'
-```
-The gpg key might change, so it may need to be updated when installing a new 
-release. The current rocm.gpg.key is not avialable in a standard key ring distribution,
-but has the following sha1sum hash:
-
-f0d739836a9094004b0a39058d046349aacc1178  rocm.gpg.key
-
-##### Install
-
-Next, update the apt repository list and install the rocm package:
-
->**Warning**: Before proceeding, make sure to completely
->[uninstall any previous ROCm package](https://github.com/RadeonOpenCompute/ROCm#removing-pre-release-packages):
-
-```shell
-sudo apt update
-sudo apt install rocm-dkms
-```
-
-###### Next set your permissions 
-
-With move to upstreaming the KFD driver and the support of DKMS,  for all Console aka headless user, you will need to add all  your users to the  'video" group by setting the Unix permissions
-
-Configure 
-Ensure that your user account is a member of the "video" group prior to using the ROCm driver. You can find which groups you are a member of with the following command:
-
-```shell
-groups
-```
-
-To add yourself to the video group you will need the sudo password and can use the following command:
-
-```shell
-sudo usermod -a -G video $LOGNAME 
-``` 
-
-Once complete, reboot your system.
-
-Upon Reboot run 
-```shell
-rocminfo 
-clinfo 
-``` 
-
-If you have an [Install Issue ](https://rocm.github.io/install_issues.html) please read this FAQ .
-
-##### For Vega10 Users who want to run ROCm without supporting PCIe atomic support must set HSA_ENABLE_SDMA=0
-
-Currently with Vega10 GPUs to disable PCIe atomics support in ROCm, you need to turn off SDMA functionality.
-
-```shell
-export HSA_ENABLE_SDMA=0
-```
-
-###### Upon restart, to test your OpenCL instance 
-
- Build and run Hello World OCL app.
-
-HelloWorld sample:
-
-```shell
- wget https://raw.githubusercontent.com/bgaster/opencl-book-samples/master/src/Chapter_2/HelloWorld/HelloWorld.cpp
- wget https://raw.githubusercontent.com/bgaster/opencl-book-samples/master/src/Chapter_2/HelloWorld/HelloWorld.cl
-```
-
- Build it using the default ROCm OpenCL include and library locations:
-
-```shell
-g++ -I /opt/rocm/opencl/include/ ./HelloWorld.cpp -o HelloWorld -L/opt/rocm/opencl/lib/x86_64 -lOpenCL
-```
-
- Run it:
-
- ```shell
- ./HelloWorld
-```
-
-##### How to un-install from Ubuntu 16.04
-
-To un-install the entire rocm development package execute:
-
-```shell
-sudo apt autoremove rocm-dkms
-```
-
-##### Installing development packages for cross compilation
-
-It is often useful to develop and test on different systems. In this scenario,
-you may prefer to avoid installing the ROCm Kernel to your development system.
-
-In this case, install the development subset of packages:
-
-```shell
-sudo apt update
-sudo apt install rocm-dev
-```
-
->**Note:** To execute ROCm enabled apps you will require a system with the full
->ROCm driver stack installed
-
-##### Removing pre-release packages
-
-If you installed any of the ROCm pre-release packages from github, they will
-need to be manually un-installed:
-
-```shell
-sudo apt purge hsakmt-roct
-sudo apt purge hsakmt-roct-dev
-sudo apt purge compute-firmware
-sudo apt purge $(dpkg -l | grep 'kfd\|rocm' | grep linux | grep -v libc | awk '{print $2}')
-```
-
-If possible, we would recommend starting with a fresh OS install.
-
-### CentOS/RHEL 7 (both 7.4 and 7.5) Support
-
-Support for CentOS/RHEL 7 has been added in ROCm 1.8, but requires a special 
-runtime environment provided by the RHEL Software Collections and additional
-dkms support packages to properly install in run.
-
-#### Preparing RHEL 7 for installation
-
-RHEL is a subscription based operating system, and must enable several external
-repositories to enable installation of the devtoolset-7 environment and the DKMS
-support files. These steps are not required for CentOS.
-
-First, the subscription for RHEL must be enabled and attached to a pool id. Please
-see Obtaining an RHEL image and license page for instructions on registering your
-system with the RHEL subscription server and attaching to a pool id.
-
-
-Second, enable the following repositories:
-
-```shell
-sudo subscription-manager repos --enable rhel-server-rhscl-7-rpms
-sudo subscription-manager repos --enable rhel-7-server-optional-rpms
-sudo subscription-manager repos --enable rhel-7-server-extras-rpms
-```
-
-Third, enable additional repositories by downloading and installing the epel-release-latest-7 repository RPM:
-
-```shell
-sudo rpm -ivh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
-```
-
-#### Install and setup Devtoolset-7
-
-To setup the Devtoolset-7 environment, follow the instructions on this page:
-
-https://www.softwarecollections.org/en/scls/rhscl/devtoolset-7/
-
-Note that devtoolset-7 is a Software Collections package, and is not supported by AMD.
-
-#### Prepare CentOS/RHEL 7.4 or 7.5 for DKMS Install
-
-Installing kernel drivers on CentOS/RHEL 7.4/7.5 requires dkms tool being installed:
-
-```shell
-sudo yum install -y epel-release
-sudo yum install -y dkms kernel-headers-`uname -r`
-```
-
-
-At this point they system can install ROCm using the DKMS drivers.
-
-Installing ROCm on the system
-At this point ROCm can be installed on the target system. Create a /etc/yum.repos.d/rocm.repo file with the following contents:
-
-```shell
-[ROCm]
-name=ROCm
-baseurl=http://repo.radeon.com/rocm/yum/rpm
-enabled=1
-gpgcheck=0
-```
-
-The repo's URL should point to the location of the repositories repodata database. Install ROCm components using these commands:
-
-```shell
-sudo yum install rocm-dkms
-```
-
-The rock-dkms component should be installed and the /dev/kfd device should be available on reboot.
-
-Ensure that your user account is a member of the "video" or "wheel" group prior to using the ROCm driver.
-You can find which groups you are a member of with the following command:
-
-```shell
-groups
-```
-
-To add yourself to the video (or wheel) group you will need the sudo password and can use the
-following command:
-
-```shell
-sudo usermod -a -G video $LOGNAME 
-```
-
-Current release supports up to CentOS/RHEL 7.4 and 7.5. Users should update to the latest version of the OS:
-
-```shell
-sudo yum update
-```
-##### For Vega10 Users who want to run ROCm without supporting PCIe atomic support must set HSA_ENABLE_SDMA=0
-
-Currently with Vega10 GPUs to disable PCIe atomics support in ROCm, you need to turn off SDMA functionality.
-
-```shell
-export HSA_ENABLE_SDMA=0
-```
-
-#### Compiling applications using hcc, hip, etc.
-
-To compile applications or samples, please use gcc-7.2 provided by the devtoolset-7 environment.
-To do this, compile all applications after running this command: 
-
-```shell
-scl enable devtoolset-7 bash
-```
-#### How to un-install ROCm from CentOS/RHEL 7.4
-
-To un-install the entire rocm development package execute:
-
-```shell
-sudo yum autoremove rocm-dkms
-```
-
-#### Known Issues / Workarounds
-
-##### If you Plan to Run with X11 - we are seeing X freezes under load
-
-ROCm 1.8.2 a kernel parameter noretry has been set to 1 to improve overall system performance. However it has been proven to bring instability to graphics driver shipped with Ubuntu. This is an ongoing issue and we are looking into it.
-
-Before that, please try apply this change by changing noretry bit to 0.
-
-```shell
-echo 0 | sudo tee /sys/module/amdkfd/parameters/noretry
-```
-
-Files under /sys won't be preserved after reboot so you'll need to do it every time.
-
-One way to keep noretry=0 is to change /etc/modprobe.d/amdkfd.conf and make it be:
-
-options amdkfd noretry=0
-
-Once it's done, run sudo update-initramfs -u. Reboot and verify /sys/module/amdkfd/parameters/noretry stays as 0.
-
-##### If you are you are using hipCaffe Alexnet training on ImageNet - we are seeing sporadic hangs of hipCaffe during training
-
-##### Vega10 Users who want to run ROCm without supporting PCIe atomic support must set HSA_ENABLE_SDMA=0
-
-Currently with Vega10 GPUs to disable PCIe atomics support in ROCm, you need to turn off SDMA functionality.
-
-```shell
-export HSA_ENABLE_SDMA=0
-```
-
-#### Closed source components
-
-The ROCm platform relies on a few closed source components to provide legacy
-functionality like HSAIL finalization and debugging/profiling support. These
-components are only available through the ROCm repositories, and will either be
-deprecated or become open source components in the future. These components are
-made available in the following packages:
-
-*  hsa-ext-rocr-dev
-
-### Getting ROCm source code
-
-Modifications can be made to the ROCm 1.8 components by modifying the open
-source code base and rebuilding the components. Source code can be cloned from
-each of the GitHub repositories using git, or users can use the repo command
-and the ROCm 1.8 manifest file to download the entire ROCm 1.8 source code.
-
-#### Installing repo
-
-Google's repo tool allows you to manage multiple git repositories
-simultaneously. You can install it by executing the following commands:
-
-```shell
-curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
-chmod a+x ~/bin/repo
-```
-Note: make sure ~/bin exists and it is part of your PATH
-
-#### Cloning the code
-
-```shell
-mkdir ROCm && cd ROCm
-repo init -u https://github.com/RadeonOpenCompute/ROCm.git -b roc-1.8.2
-repo sync
-```
-These series of commands will pull all of the open source code associated with
-the ROCm 1.8 release. Please ensure that ssh-keys are configured for the
-target machine on GitHub for your GitHub ID.
-
-* OpenCL Runtime and Compiler will be submitted to the Khronos Group, prior to
-  the final release, for conformance testing.
+For release information for older ROCm™ releases, refer to
+[CHANGELOG](./CHANGELOG.md).

RELEASE.md

@@ -0,0 +1,512 @@
+# Release Notes
+<!-- Do not edit this file! This file is autogenerated with -->
+<!--   tools/autotag/tag_script.py                          -->
+
+<!-- Disable lints since this is an auto-generated file.    -->
+<!-- markdownlint-disable blanks-around-headers             -->
+<!-- markdownlint-disable no-duplicate-header               -->
+<!-- markdownlint-disable no-blanks-blockquote              -->
+<!-- markdownlint-disable ul-indent                         -->
+<!-- markdownlint-disable no-trailing-spaces                -->
+
+<!-- spellcheck-disable -->
+
+The release notes for the ROCm platform.
+
+-------------------
+
+## ROCm 5.2.0
+<!-- markdownlint-disable first-line-h1 -->
+<!-- markdownlint-disable no-duplicate-header -->
+### What's New in This Release
+
+#### HIP Enhancements
+
+The ROCm v5.2 release consists of the following HIP enhancements:
+
+##### HIP Installation Guide Updates
+
+The HIP Installation Guide is updated to include building HIP tests from source on the AMD and NVIDIA platforms.
+
+For more details, refer to the HIP Installation Guide v5.2.
+
+##### Support for device-side malloc on HIP-Clang
+
+HIP-Clang now supports device-side malloc. This implementation does not require the use of `hipDeviceSetLimit(hipLimitMallocHeapSize,value)` nor respect any setting. The heap is fully dynamic and can grow until the available free memory on the device is consumed.
+
+The test codes at the following link show how to implement applications using malloc and free functions in device kernels:
+
+<https://github.com/ROCm-Developer-Tools/HIP/blob/develop/tests/src/deviceLib/hipDeviceMalloc.cpp>
+
+##### New HIP APIs in This Release
+
+The following new HIP APIs are available in the ROCm v5.2 release. Note that this is a pre-official version (beta) release of the new APIs:
+
+###### Device management HIP APIs
+
+The new device management HIP APIs are as follows:
+
+- Gets a UUID for the device. This API returns a UUID for the device.
+
+  ```h
+  hipError_t hipDeviceGetUuid(hipUUID* uuid, hipDevice_t device);
+  ```
+
+  > **Note**
+  >
+  > This new API corresponds to the following CUDA API:
+  >
+  > ```h
+  > CUresult cuDeviceGetUuid(CUuuid* uuid, CUdevice dev);
+  > ```
+
+- Gets default memory pool of the specified device
+
+  ```h
+  hipError_t hipDeviceGetDefaultMemPool(hipMemPool_t* mem_pool, int device);
+  ```
+
+- Sets the current memory pool of a device
+
+  ```h
+  hipError_t hipDeviceSetMemPool(int device, hipMemPool_t mem_pool);
+  ```
+
+- Gets the current memory pool for the specified device
+
+  ```h
+  hipError_t hipDeviceGetMemPool(hipMemPool_t* mem_pool, int device);
+  ```
+
+###### New HIP Runtime APIs in Memory Management
+
+The new Stream Ordered Memory Allocator functions of HIP runtime APIs in memory management are as follows:
+
+- Allocates memory with stream ordered semantics
+
+  ```h
+  hipError_t hipMallocAsync(void** dev_ptr, size_t size, hipStream_t stream);
+  ```
+
+- Frees memory with stream ordered semantics
+
+  ```h
+  hipError_t hipFreeAsync(void* dev_ptr, hipStream_t stream);
+  ```
+
+- Releases freed memory back to the OS
+
+  ```h
+  hipError_t hipMemPoolTrimTo(hipMemPool_t mem_pool, size_t min_bytes_to_hold);
+  ```
+
+- Sets attributes of a memory pool
+
+  ```h
+  hipError_t hipMemPoolSetAttribute(hipMemPool_t mem_pool, hipMemPoolAttr attr, void* value);
+  ```
+
+- Gets attributes of a memory pool
+
+  ```h
+  hipError_t hipMemPoolGetAttribute(hipMemPool_t mem_pool, hipMemPoolAttr attr, void* value);
+  ```
+
+- Controls visibility of the specified pool between devices
+
+  ```h
+  hipError_t hipMemPoolSetAccess(hipMemPool_t mem_pool, const hipMemAccessDesc* desc_list, size_t count);
+  ```
+
+- Returns the accessibility of a pool from a device
+
+  ```h
+  hipError_t hipMemPoolGetAccess(hipMemAccessFlags* flags, hipMemPool_t mem_pool, hipMemLocation* location);
+  ```
+
+- Creates a memory pool
+
+  ```h
+  hipError_t hipMemPoolCreate(hipMemPool_t* mem_pool, const hipMemPoolProps* pool_props);
+  ```
+
+- Destroys the specified memory pool
+
+  ```h
+  hipError_t hipMemPoolDestroy(hipMemPool_t mem_pool);
+  ```
+
+- Allocates memory from a specified pool with stream ordered semantics
+
+  ```h
+  hipError_t hipMallocFromPoolAsync(void** dev_ptr, size_t size, hipMemPool_t mem_pool, hipStream_t stream);
+  ```
+
+- Exports a memory pool to the requested handle type
+
+  ```h
+  hipError_t hipMemPoolExportToShareableHandle(
+      void*                      shared_handle,
+      hipMemPool_t               mem_pool,
+      hipMemAllocationHandleType handle_type,
+      unsigned int               flags);
+  ```
+
+- Imports a memory pool from a shared handle
+
+  ```h
+  hipError_t hipMemPoolImportFromShareableHandle(
+      hipMemPool_t*              mem_pool,
+      void*                      shared_handle,
+      hipMemAllocationHandleType handle_type,
+      unsigned int               flags);
+  ```
+
+- Exports data to share a memory pool allocation between processes
+
+  ```h
+  hipError_t hipMemPoolExportPointer(hipMemPoolPtrExportData* export_data, void* dev_ptr);
+  Import a memory pool allocation from another process.t
+  hipError_t hipMemPoolImportPointer(
+      void**                   dev_ptr,
+      hipMemPool_t             mem_pool,
+      hipMemPoolPtrExportData* export_data);
+  ```
+
+###### HIP Graph Management APIs
+
+The new HIP Graph Management APIs are as follows:
+
+- Enqueues a host function call in a stream
+
+  ```h
+  hipError_t hipLaunchHostFunc(hipStream_t stream, hipHostFn_t fn, void* userData);
+  ```
+
+- Swaps the stream capture mode of a thread
+
+  ```h
+  hipError_t hipThreadExchangeStreamCaptureMode(hipStreamCaptureMode* mode);
+  ```
+
+- Sets a node attribute
+
+  ```h
+  hipError_t hipGraphKernelNodeSetAttribute(hipGraphNode_t hNode, hipKernelNodeAttrID attr, const hipKernelNodeAttrValue* value);
+  ```
+
+- Gets a node attribute
+
+  ```h
+  hipError_t hipGraphKernelNodeGetAttribute(hipGraphNode_t hNode, hipKernelNodeAttrID attr,                                          hipKernelNodeAttrValue* value);
+  ```
+
+###### Support for Virtual Memory Management APIs
+
+The new APIs for virtual memory management are as follows:
+
+- Frees an address range reservation made via hipMemAddressReserve
+
+  ```h
+  hipError_t hipMemAddressFree(void* devPtr, size_t size);
+  ```
+
+- Reserves an address range
+
+  ```h
+  hipError_t hipMemAddressReserve(void** ptr, size_t size, size_t alignment, void* addr, unsigned long long flags);
+  ```
+
+- Creates a memory allocation described by the properties and size
+
+  ```h
+  hipError_t hipMemCreate(hipMemGenericAllocationHandle_t* handle, size_t size, const hipMemAllocationProp* prop, unsigned long long flags);
+  ```
+
+- Exports an allocation to a requested shareable handle type
+
+  ```h
+  hipError_t hipMemExportToShareableHandle(void* shareableHandle, hipMemGenericAllocationHandle_t handle, hipMemAllocationHandleType handleType, unsigned long long flags);
+  ```
+
+- Gets the access flags set for the given location and ptr
+
+  ```h
+  hipError_t hipMemGetAccess(unsigned long long* flags, const hipMemLocation* location, void* ptr);
+  ```
+
+- Calculates either the minimal or recommended granularity
+
+  ```h
+  hipError_t hipMemGetAllocationGranularity(size_t* granularity, const hipMemAllocationProp* prop, hipMemAllocationGranularity_flags option);
+  ```
+
+- Retrieves the property structure of the given handle
+
+  ```h
+  hipError_t hipMemGetAllocationPropertiesFromHandle(hipMemAllocationProp* prop, hipMemGenericAllocationHandle_t handle);
+  ```
+
+- Imports an allocation from a requested shareable handle type
+
+  ```h
+  hipError_t hipMemImportFromShareableHandle(hipMemGenericAllocationHandle_t* handle, void* osHandle, hipMemAllocationHandleType shHandleType);
+  ```
+
+- Maps an allocation handle to a reserved virtual address range
+
+  ```h
+  hipError_t hipMemMap(void* ptr, size_t size, size_t offset, hipMemGenericAllocationHandle_t handle, unsigned long long flags);
+  ```
+
+- Maps or unmaps subregions of sparse HIP arrays and sparse HIP mipmapped arrays
+
+  ```h
+  hipError_t hipMemMapArrayAsync(hipArrayMapInfo* mapInfoList, unsigned int  count, hipStream_t stream);
+  ```
+
+- Release a memory handle representing a memory allocation, that  was previously allocated through hipMemCreate
+
+  ```h
+  hipError_t hipMemRelease(hipMemGenericAllocationHandle_t handle);
+  ```
+
+- Returns the allocation handle of the backing memory allocation given the address
+
+  ```h
+  hipError_t hipMemRetainAllocationHandle(hipMemGenericAllocationHandle_t* handle, void* addr);
+  ```
+
+- Sets the access flags for each location specified in desc for the given virtual address range
+
+  ```h
+  hipError_t hipMemSetAccess(void* ptr, size_t size, const hipMemAccessDesc* desc, size_t count);
+  ```
+
+- Unmaps memory allocation of a given address range
+
+  ```h
+  hipError_t hipMemUnmap(void* ptr, size_t size);
+  ```
+
+For more information, refer to the HIP API documentation at
+{doc}`hip:.doxygen/docBin/html/modules`.
+
+##### Planned HIP Changes in Future Releases
+
+Changes to `hipDeviceProp_t`, `HIPMEMCPY_3D`, and `hipArray` structures (and related HIP APIs) are planned in the next major release. These changes may impact backward compatibility.
+
+Refer to the Release Notes document in subsequent releases for more information.
+ROCm Math and Communication Libraries
+
+In this release, ROCm Math and Communication Libraries consist of the following enhancements and fixes:
+New rocWMMA for Matrix Multiplication and Accumulation Operations Acceleration
+
+This release introduces a new ROCm C++ library for accelerating mixed precision matrix multiplication and accumulation (MFMA) operations leveraging specialized GPU matrix cores. rocWMMA provides a C++ API to facilitate breaking down matrix multiply accumulate problems into fragments and using them in block-wise operations that are distributed in parallel across GPU wavefronts. The API is a header library of GPU device code, meaning matrix core acceleration may be compiled directly into your kernel device code. This can benefit from compiler optimization in the generation of kernel assembly and does not incur additional overhead costs of linking to external runtime libraries or having to launch separate kernels.
+
+rocWMMA is released as a header library and includes test and sample projects to validate and illustrate example usages of the C++ API. GEMM matrix multiplication is used as primary validation given the heavy precedent for the library. However, the usage portfolio is growing significantly and demonstrates different ways rocWMMA may be consumed.
+
+For more information, refer to
+[Communication Libraries](../../../../docs/reference/gpu_libraries/communication.md).
+
+#### OpenMP Enhancements in This Release
+
+##### OMPT Target Support
+
+The OpenMP runtime in ROCm implements a subset of the OMPT device APIs, as described in the OpenMP specification document. These are APIs that allow first-party tools to examine the profile and traces for kernels that execute on a device. A tool may register callbacks for data transfer and kernel dispatch entry points. A tool may use APIs to start and stop tracing for device-related activities such as data transfer and kernel dispatch timings and associated metadata. If device tracing is enabled, trace records for device activities are collected during program execution and returned to the tool using the APIs described in the specification.
+
+Following is an example demonstrating how a tool would use the OMPT target APIs supported. The README in /opt/rocm/llvm/examples/tools/ompt outlines the steps to follow, and you can run the provided example as indicated below:
+
+```sh
+cd /opt/rocm/llvm/examples/tools/ompt/veccopy-ompt-target-tracing
+make run
+```
+
+The file `veccopy-ompt-target-tracing.c` simulates how a tool would initiate device activity tracing. The file `callbacks.h` shows the callbacks that may be registered and implemented by the tool.
+
+### Deprecations and Warnings
+
+#### Linux Filesystem Hierarchy Standard for ROCm
+
+ROCm packages have adopted the Linux foundation filesystem hierarchy standard in this release to ensure ROCm components follow open source conventions for Linux-based distributions. While moving to a new filesystem hierarchy, ROCm ensures backward compatibility with its 5.1 version or older filesystem hierarchy. See below for a detailed explanation of the new filesystem hierarchy and backward compatibility.
+
+##### New Filesystem Hierarchy
+
+The following is the new filesystem hierarchy:
+
+```text
+/opt/rocm-<ver>
+    | --bin
+      | --All externally exposed Binaries
+    | --libexec
+        | --<component>
+            | -- Component specific private non-ISA executables (architecture independent)
+    | --include
+        | -- <component>
+            | --<header files>
+    | --lib
+        | --lib<soname>.so -> lib<soname>.so.major -> lib<soname>.so.major.minor.patch
+            (public libraries linked with application)
+        | --<component> (component specific private library, executable data)
+        | --<cmake>
+            | --components
+                | --<component>.config.cmake
+    | --share
+        | --html/<component>/*.html
+        | --info/<component>/*.[pdf, md, txt]
+        | --man
+        | --doc
+            | --<component>
+                | --<licenses>
+        | --<component>
+            | --<misc files> (arch independent non-executable)
+            | --samples
+
+```
+
+> **Note**
+>
+> ROCm will not support backward compatibility with the v5.1(old) file system hierarchy in its next major release.
+
+For more information, refer to <https://refspecs.linuxfoundation.org/fhs.shtml>.
+
+##### Backward Compatibility with Older Filesystems
+
+ROCm has moved header files and libraries to its new location as indicated in the above structure and included symbolic-link and wrapper header files in its old location for backward compatibility.
+
+> **Note**
+>
+> ROCm will continue supporting backward compatibility until the next major release.
+
+##### Wrapper header files
+
+Wrapper header files are placed in the old location (`/opt/rocm-xxx/<component>/include`) with a warning message to include files from the new location (`/opt/rocm-xxx/include`) as shown in the example below:
+
+```h
+// Code snippet from hip_runtime.h
+#pragma message “This file is deprecated. Use file from include path /opt/rocm-ver/include/ and prefix with hip”.
+#include "hip/hip_runtime.h"
+```
+
+The wrapper header files’ backward compatibility deprecation is as follows:
+
+- `#pragma` message announcing deprecation -- ROCm v5.2 release
+- `#pragma` message changed to `#warning` -- Future release
+- `#warning` changed to `#error` -- Future release
+- Backward compatibility wrappers removed -- Future release
+
+##### Library files
+
+Library files are available in the `/opt/rocm-xxx/lib` folder. For backward compatibility, the old library location (`/opt/rocm-xxx/<component>/lib`) has a soft link to the library at the new location.
+
+Example:
+
+```log
+$ ls -l /opt/rocm/hip/lib/
+total 4
+drwxr-xr-x 4 root root 4096 May 12 10:45 cmake
+lrwxrwxrwx 1 root root   24 May 10 23:32 libamdhip64.so -> ../../lib/libamdhip64.so
+```
+
+##### CMake Config files
+
+All CMake configuration files are available in the `/opt/rocm-xxx/lib/cmake/<component>` folder. For backward compatibility, the old CMake locations (`/opt/rocm-xxx/<component>/lib/cmake`) consist of a soft link to the new CMake config.
+
+Example:
+
+```log
+$ ls -l /opt/rocm/hip/lib/cmake/hip/
+total 0
+lrwxrwxrwx 1 root root 42 May 10 23:32 hip-config.cmake -> ../../../../lib/cmake/hip/hip-config.cmake
+```
+
+#### Planned deprecation of hip-rocclr and hip-base packages
+
+In the ROCm v5.2 release, hip-rocclr and hip-base packages (Debian and RPM) are planned for deprecation and will be removed in a future release. hip-runtime-amd and hip-dev(el) will replace these packages respectively. Users of hip-rocclr must install two packages, hip-runtime-amd and hip-dev, to get the same set of packages installed by hip-rocclr previously.
+
+Currently, both package names hip-rocclr (or) hip-runtime-amd and hip-base (or) hip-dev(el) are supported.
+Deprecation of Integrated HIP Directed Tests
+
+The integrated HIP directed tests, which are currently built by default, are deprecated in this release. The default building and execution support through CMake will be removed in future release.
+
+### Fixed Defects
+
+| Fixed Defect                                                                 |  Fix     |
+|------------------------------------------------------------------------------|----------|
+| ROCmInfo does not list gpus                                                  | Code fix |
+| Hang observed while restoring cooperative group samples                      | Code fix |
+| ROCM-SMI over SRIOV: Unsupported commands do not return proper error message | Code fix |
+
+### Known Issues
+
+This section consists of known issues in this release.
+
+#### Compiler Error on gfx1030 When Compiling at -O0
+
+##### Issue
+
+A compiler error occurs when using -O0 flag to compile code for gfx1030 that calls atomicAddNoRet, which is defined in amd_hip_atomic.h. The compiler generates an illegal instruction for gfx1030.
+
+##### Workaround
+
+The workaround is not to use the -O0 flag for this case. For higher optimization levels, the compiler does not generate an invalid instruction.
+
+#### System Freeze Observed During CUDA Memtest Checkpoint
+
+##### Issue
+
+Checkpoint/Restore in Userspace (CRIU) requires 20 MB of VRAM approximately to checkpoint and restore. The CRIU process may freeze if the maximum amount of available VRAM is allocated to checkpoint applications.
+
+##### Workaround
+
+To use CRIU to checkpoint and restore your application, limit the amount of VRAM the application uses to ensure at least 20 MB is available.
+
+#### HPC test fails with the “HSA_STATUS_ERROR_MEMORY_FAULT” error
+
+##### Issue
+
+The compiler may incorrectly compile a program that uses the `__shfl_sync(mask, value, srcLane)` function when the "value" parameter to the function is undefined along some path to the function. For most functions, uninitialized inputs cause undefined behavior, but the definition for `__shfl_sync` should allow for undefined values.
+
+##### Workaround
+
+The workaround is to initialize the parameters to `__shfl_sync`.
+
+> **Note**
+>
+> When the `-Wall` compilation flag is used, the compiler generates a warning indicating the variable is initialized along some path.
+
+Example:
+
+```cpp
+double res = 0.0; // Initialize the input to __shfl_sync.
+if (lane == 0) {
+  res = <some expression>
+}
+res = __shfl_sync(mask, res, 0);
+```
+
+#### Kernel produces incorrect result
+
+##### Issue
+
+In recent changes to Clang, insertion of the noundef attribute to all the function arguments has been enabled by default.
+
+In the HIP kernel, variable var in shfl_sync may not be initialized, so LLVM IR treats it as undef.
+
+So, the function argument that is potentially undef (because it is not intialized) has always been assumed to be noundef by LLVM IR (since Clang has inserted noundef attribute). This leads to ambiguous kernel execution.
+
+##### Workaround
+
+- Skip adding `noundef` attribute to functions tagged with convergent  attribute. Refer to <https://reviews.llvm.org/D124158> for more information.
+
+- Introduce shuffle attribute and add it to `__shfl` like APIs at hip headers. Clang can skip adding noundef attribute, if it finds that argument is tagged with shuffle attribute. Refer to <https://reviews.llvm.org/D125378> for more information.
+
+- Introduce clang builtin for `__shfl` to identify it and skip adding `noundef` attribute.
+
+- Introduce `__builtin_freeze` to use on the relevant arguments in library wrappers. The library/header need to insert freezes on the relevant inputs.
+
+#### Issue with Applications Triggering Oversubscription
+
+There is a known issue with applications that trigger oversubscription. A hardware hang occurs when ROCgdb is used on AMD Instinct™ MI50 and MI100 systems.
+
+This issue is under investigation and will be fixed in a future release.

default.xml

@@ -1,27 +1,79 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <manifest>
-
     <remote name="roc-github"
-            fetch="http://git@github.com/RadeonOpenCompute/" />
-    <remote name="pctools-github"
-            fetch="http://git@github.com/GPUOpen-ProfessionalCompute-Tools/" />
-
-    <default revision="roc-1.8.x"
-             remote="roc-github"
-             sync-j="4" />
-
-    <project path="ROCK-Kernel-Driver" name="ROCK-Kernel-Driver" />
-    <project path="ROCT-Thunk-Interface" name="ROCT-Thunk-Interface" />
-    <project path="ROC-smi" name="ROC-smi" />
-    <project path="ROCR-Runtime" name="ROCR-Runtime" />
-    <project path="hcc" name="hcc" />
-    <project path="compiler-rt" name="compiler-rt" />
-    <project path="HIP" remote="pctools-github" name="HIP" />
-    <project path="HIP-Examples" remote="pctools-github" name="HIP-Examples" />
-    <project path="atmi" name="atmi" revision="master" />
-    <project path="llvm" name="llvm" />
-    <project path="lld" name="lld" />
-    <project path="hcc-clang-upgrade" name="hcc-clang-upgrade" />
-    <project path="ROCm-Device-Libs" name="ROCm-Device-Libs" />
-
+fetch="https://github.com/RadeonOpenCompute/" />
+    <remote name="rocm-devtools"
+fetch="https://github.com/ROCm-Developer-Tools/" />
+    <remote name="rocm-swplat"
+fetch="https://github.com/ROCmSoftwarePlatform/" />
+    <remote name="gpuopen-libs"
+fetch="https://github.com/GPUOpen-ProfessionalCompute-Libraries/" />
+    <remote name="gpuopen-tools"
+fetch="https://github.com/GPUOpen-Tools/" />
+    <remote name="KhronosGroup"
+fetch="https://github.com/KhronosGroup/" />
+    <default revision="refs/tags/rocm-5.5.1"
+     remote="roc-github"
+     sync-c="true"
+     sync-j="4" />
+<!--list of projects for ROCM-->
+    <project name="ROCK-Kernel-Driver" />
+    <project name="ROCT-Thunk-Interface" />
+    <project name="ROCR-Runtime" />
+    <project name="rocm_smi_lib" />
+    <project name="rocm-core" />
+    <project name="rocm-cmake" />
+    <project name="rocminfo" />
+    <project name="rocprofiler" remote="rocm-devtools" />
+    <project name="roctracer" remote="rocm-devtools" />
+    <project name="ROCm-OpenCL-Runtime" />
+    <project path="ROCm-OpenCL-Runtime/api/opencl/khronos/icd" name="OpenCL-ICD-Loader" remote="KhronosGroup" revision="6c03f8b58fafd9dd693eaac826749a5cfad515f8" />
+    <project name="clang-ocl" />
+<!--HIP Projects-->
+    <project name="HIP" remote="rocm-devtools" />
+    <project name="hipamd" remote="rocm-devtools" />
+    <project name="HIP-Examples" remote="rocm-devtools" />
+    <project name="ROCclr" remote="rocm-devtools" />
+    <project name="HIPIFY" remote="rocm-devtools" />
+    <project name="HIPCC" remote="rocm-devtools" />
+<!-- The following projects are all associated with the AMDGPU LLVM compiler -->
+    <project name="llvm-project" />
+    <project name="ROCm-Device-Libs" />
+    <project name="atmi" />
+    <project name="ROCm-CompilerSupport" />
+    <project name="rocr_debug_agent" remote="rocm-devtools" />
+    <project name="rocm_bandwidth_test" />
+    <project name="half" remote="rocm-swplat" revision="37742ce15b76b44e4b271c1e66d13d2fa7bd003e" />
+    <project name="RCP" remote="gpuopen-tools" revision="3a49405a1500067c49d181844ec90aea606055bb" />
+<!-- gdb projects -->
+    <project name="ROCgdb" remote="rocm-devtools" />
+    <project name="ROCdbgapi" remote="rocm-devtools" />
+<!-- ROCm Libraries -->
+    <project name="rdc" />
+    <project groups="mathlibs" name="rocBLAS" remote="rocm-swplat" />
+    <project groups="mathlibs" name="Tensile" remote="rocm-swplat" />
+    <project groups="mathlibs" name="hipBLAS" remote="rocm-swplat" />
+    <project groups="mathlibs" name="rocFFT" remote="rocm-swplat" />
+    <project groups="mathlibs" name="hipFFT" remote="rocm-swplat" />
+    <project groups="mathlibs" name="rocRAND" remote="rocm-swplat" />
+    <project groups="mathlibs" name="rocSPARSE" remote="rocm-swplat" />
+    <project groups="mathlibs" name="rocSOLVER" remote="rocm-swplat" />
+    <project groups="mathlibs" name="hipSOLVER" remote="rocm-swplat" />
+    <project groups="mathlibs" name="hipSPARSE" remote="rocm-swplat" />
+    <project groups="mathlibs" name="rocALUTION" remote="rocm-swplat" />
+    <project name="MIOpenGEMM" remote="rocm-swplat" />
+    <project name="MIOpen" remote="rocm-swplat" />
+    <project groups="mathlibs" name="rccl" remote="rocm-swplat" />
+    <project name="MIVisionX" remote="gpuopen-libs" />
+    <project groups="mathlibs" name="rocThrust" remote="rocm-swplat" />
+    <project groups="mathlibs" name="hipCUB" remote="rocm-swplat" />
+    <project groups="mathlibs" name="rocPRIM" remote="rocm-swplat" />
+    <project groups="mathlibs" name="rocWMMA" remote="rocm-swplat" />
+    <project name="hipfort" remote="rocm-swplat" />
+    <project name="AMDMIGraphX" remote="rocm-swplat" />
+    <project name="ROCmValidationSuite" remote="rocm-devtools" />
+<!-- Projects for OpenMP-Extras -->
+    <project name="aomp" path="openmp-extras/aomp" remote="rocm-devtools" />
+    <project name="aomp-extras" path="openmp-extras/aomp-extras" remote="rocm-devtools" />
+    <project name="flang" path="openmp-extras/flang" remote="rocm-devtools" />
 </manifest>

docs/404.md

@@ -0,0 +1,6 @@
+# 404 Page Not Found
+
+Page could not be found.
+
+Return to [home](./index) or please use the links from the sidebar to find what
+you are looking for.

docs/about.md

@@ -0,0 +1,74 @@
+# About ROCm Documentation
+
+ROCm documentation is made available under open source [licenses](licensing.md).
+Documentation is built using open source toolchains. Contributions to our
+documentation is encouraged and welcome. As a contributor, please familiarize
+yourself with our documentation toolchain.
+
+## ReadTheDocs
+
+[ReadTheDocs](https://docs.readthedocs.io/en/stable/) is our front end for the
+our documentation. By front end, this is the tool that serves our HTML based
+documentation to our end users.
+
+## Doxygen
+
+[Doxygen](https://www.doxygen.nl/) is the most common inline code documentation
+standard. ROCm projects are use Doxygen for public API documentation (unless the
+upstream project is using a different tool).
+
+## Sphinx
+
+[Sphinx](https://www.sphinx-doc.org/en/master/) is a documentation generator
+originally used for python. It is now widely used in the Open Source community.
+Originally, sphinx supported RST based documentation. Markdown support is now
+available. ROCm documentation plans to default to markdown for new projects.
+Existing projects using RST are under no obligation to convert to markdown. New
+projects that believe markdown is not suitable should contact the documentation
+team prior to selecting RST.
+
+### MyST
+
+[Markedly Structured Text (MyST)](https://myst-tools.org/docs/spec) is an extended
+flavor of Markdown ([CommonMark](https://commonmark.org/)) influenced by reStructuredText (RST) and Sphinx.
+It is integrated via [`myst-parser`](https://myst-parser.readthedocs.io/en/latest/).
+A cheat sheet that showcases how to use the MyST syntax is available over at [the Jupyter
+reference](https://jupyterbook.org/en/stable/reference/cheatsheet.html).
+
+### Sphinx Theme
+
+ROCm is using the
+[Sphinx Book Theme](https://sphinx-book-theme.readthedocs.io/en/latest/). This
+theme is used by Jupyter books. ROCm documentation applies some customization
+include a header and footer on top of the Sphinx Book Theme. A future custom
+ROCm theme will be part of our documentation goals.
+
+### Sphinx Design
+
+Sphinx Design is an extension for sphinx based websites that add design
+functionality. Please see the documentation
+[here](https://sphinx-design.readthedocs.io/en/latest/index.html). ROCm
+documentation uses sphinx design for grids, cards, and synchronized tabs.
+Other features may be used in the future.
+
+### Sphinx External TOC
+
+ROCm uses the
+[sphinx-external-toc](https://sphinx-external-toc.readthedocs.io/en/latest/intro.html)
+for our navigation. This tool allows a YAML file based left navigation menu. This
+tool was selected due to its flexibility that allows scripts to operate on the
+YAML file. Please transition to this file for the project's navigation. You can
+see the `_toc.yml.in` file in this repository in the docs/sphinx folder for an
+example.
+
+### Breathe
+
+Sphinx uses [Breathe](https://www.breathe-doc.org/) to integrate Doxygen
+content.
+
+## `rocm-docs-core` pip package
+
+[rocm-docs-core](https://github.com/RadeonOpenCompute/rocm-docs-core) is an AMD
+maintained project that applies customization for our documentation. This
+project is the tool most ROCm repositories will use as part of the documentation
+build.

docs/conf.py

@@ -0,0 +1,76 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# This file only contains a selection of the most common options. For a full
+# list see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+import shutil
+
+from rocm_docs import ROCmDocs
+
+
+shutil.copy2('../CONTRIBUTING.md','./contributing.md')
+shutil.copy2('../RELEASE.md','./release.md')
+# Keep capitalization due to similar linking on GitHub's markdown preview.
+shutil.copy2('../CHANGELOG.md','./CHANGELOG.md')
+
+# configurations for PDF output by Read the Docs
+project = "ROCm Documentation"
+author = "Advanced Micro Devices, Inc."
+copyright = "Copyright (c) 2023 Advanced Micro Devices, Inc. All rights reserved."
+version = "5.2.0"
+release = "5.2.0"
+
+setting_all_article_info = True
+all_article_info_os = ["linux"]
+all_article_info_author = ""
+
+# pages with specific settings
+article_pages = [
+    {"file":"deploy/linux/index", "os":["linux"]},
+    {"file":"deploy/linux/install_overview", "os":["linux"]},
+    {"file":"deploy/linux/prerequisites", "os":["linux"]},
+    {"file":"deploy/linux/quick_start", "os":["linux"]},
+    {"file":"deploy/linux/install", "os":["linux"]},
+    {"file":"deploy/linux/upgrade", "os":["linux"]},
+    {"file":"deploy/linux/uninstall", "os":["linux"]},
+    {"file":"deploy/linux/package_manager_integration", "os":["linux"]},
+    {"file":"deploy/docker", "os":["linux"]},
+    
+    {"file":"release/gpu_os_support", "os":["linux"]},
+    {"file":"release/docker_support_matrix", "os":["linux"]},
+    
+    {"file":"reference/gpu_libraries/communication", "os":["linux"]},
+    {"file":"reference/ai_tools", "os":["linux"]},
+    {"file":"reference/management_tools", "os":["linux"]},
+    {"file":"reference/validation_tools", "os":["linux"]},
+    {"file":"reference/framework_compatibility/framework_compatibility", "os":["linux"]},
+    {"file":"reference/computer_vision", "os":["linux"]},
+    
+    {"file":"how_to/deep_learning_rocm", "os":["linux"]},
+    {"file":"how_to/gpu_aware_mpi", "os":["linux"]},
+    {"file":"how_to/magma_install/magma_install", "os":["linux"]},
+    {"file":"how_to/pytorch_install/pytorch_install", "os":["linux"]},
+    {"file":"how_to/system_debugging", "os":["linux"]},
+    {"file":"how_to/tensorflow_install/tensorflow_install", "os":["linux"]},
+
+    {"file":"examples/machine_learning", "os":["linux"]},
+    {"file":"examples/inception_casestudy/inception_casestudy", "os":["linux"]},
+    
+    {"file":"understand/file_reorg", "os":["linux"]},
+
+    {"file":"understand/isv_deployment_win", "os":["windows"]},
+]
+
+external_toc_path = "./sphinx/_toc.yml"
+
+docs_core = ROCmDocs("ROCm 5.2.0 Documentation Home")
+docs_core.setup()
+
+external_projects_current_project = "rocm"
+
+for sphinx_var in ROCmDocs.SPHINX_VARS:
+    globals()[sphinx_var] = getattr(docs_core, sphinx_var)
+html_theme_options = {
+    "link_main_doc": False
+}

docs/data/deploy/quick_start_windows/image planning

@@ -0,0 +1 @@
+

docs/deploy/docker.md

@@ -0,0 +1,90 @@
+# Deploy ROCm Docker containers
+
+## Prerequisites
+
+Docker containers share the kernel with the host operating system, therefore the
+ROCm kernel-mode driver must be installed on the host. Please refer to
+{ref}`using-the-package-manager` on installing `amdgpu-dkms`. The other
+user-space parts (like the HIP-runtime or math libraries) of the ROCm stack will
+be loaded from the container image and don't need to be installed to the host.
+
+(docker-access-gpus-in-container)=
+
+## Accessing GPUs in containers
+
+In order to access GPUs in a container (to run applications using HIP, OpenCL or
+OpenMP offloading) explicit access to the GPUs must be granted.
+
+The ROCm runtimes make use of multiple device files:
+
+- `/dev/kfd`: the main compute interface shared by all GPUs
+- `/dev/dri/renderD<node>`: direct rendering interface (DRI) devices for each
+  GPU. **`<node>`** is a number for each card in the system starting from 128.
+
+Exposing these devices to a container is done by using the
+[`--device`](https://docs.docker.com/engine/reference/commandline/run/#device)
+option, i.e. to allow access to all GPUs expose `/dev/kfd` and all
+`/dev/dri/renderD` devices:
+
+```shell
+docker run --device /dev/kfd --device /dev/renderD128 --device /dev/renderD129 ...
+```
+
+More conveniently, instead of listing all devices, the entire `/dev/dri` folder
+can be exposed to the new container:
+
+```shell
+docker run --device /dev/kfd --device /dev/dri
+```
+
+Note that this gives more access than strictly required, as it also exposes the
+other device files found in that folder to the container.
+
+(docker-restrict-gpus)=
+
+### Restricting a container to a subset of the GPUs
+
+If a `/dev/dri/renderD` device is not exposed to a container then it cannot use
+the GPU associated with it; this allows to restrict a container to any subset of
+devices.
+
+For example to allow the container to access the first and third GPU start it
+like:
+
+```shell
+docker run --device /dev/kfd --device /dev/dri/renderD128 --device /dev/dri/renderD130 <image>
+```
+
+### Additional Options
+
+The performance of an application can vary depending on the assignment of GPUs
+and CPUs to the task. Typically, `numactl` is installed as part of many HPC
+applications to provide GPU/CPU mappings. This Docker runtime option supports
+memory mapping and can improve performance.
+
+```shell
+--security-opt seccomp=unconfined
+```
+
+This option is recommended for Docker Containers running HPC applications.
+
+```shell
+docker run --device /dev/kfd --device /dev/dri --security-opt seccomp=unconfined ...
+```
+
+## Docker images in the ROCm ecosystem
+
+### Base images
+
+<https://github.com/RadeonOpenCompute/ROCm-docker> hosts images useful for users
+wishing to build their own containers leveraging ROCm. The built images are
+available from [Docker Hub](https://hub.docker.com/u/rocm). In particular
+`rocm/rocm-terminal` is a small image with the prerequisites to build HIP
+applications, but does not include any libraries.
+
+### Applications
+
+AMD provides pre-built images for various GPU-ready applications through its
+Infinity Hub at <https://www.amd.com/en/technologies/infinity-hub>.
+Examples for invoking each application and suggested parameters used for
+benchmarking are also provided there.

docs/deploy/linux/index.md

@@ -0,0 +1,53 @@
+# Deploy ROCm on Linux
+
+Start with {doc}`/deploy/linux/quick_start` or follow the detailed
+instructions below.
+
+## Prepare to Install
+
+::::{grid} 1 1 2 2
+:gutter: 1
+
+:::{grid-item-card} Prerequisites
+:link: prerequisites
+:link-type: doc
+
+The prerequisites page lists the required steps *before* installation.
+:::
+
+:::{grid-item-card} Install Choices
+:link: install_overview
+:link-type: doc
+
+Package manager vs AMDGPU Installer
+
+Standard Packages vs Multi-Version Packages
+:::
+
+::::
+
+## Choose your install method
+
+::::{grid} 1 1 2 2
+:gutter: 1
+
+:::{grid-item-card} Package Manager
+:link: os-native/index
+:link-type: doc
+
+Directly use your distribution's package manager to install ROCm.
+:::
+
+:::{grid-item-card} AMDGPU Installer
+:link: installer/index
+:link-type: doc
+
+Use an installer tool that orchestrates changes via the package
+manager.
+:::
+
+::::
+
+## See Also
+
+- {doc}`/release/gpu_os_support`

docs/deploy/linux/install_overview.md

@@ -0,0 +1,71 @@
+# ROCm Installation Options (Linux)
+
+Users installing ROCm must choose between various installation options. A new
+user should follow the [Quick Start guide](./quick_start).
+
+## Package Manager versus AMDGPU Installer?
+
+ROCm supports two methods for installation:
+
+- Directly using the Linux distribution's package manager
+- The `amdgpu-install` script
+
+There is no difference in the final installation state when choosing either
+option.
+
+Using the distribution's package manager lets the user install,
+upgrade and uninstall using familiar commands and workflows. Third party
+ecosystem support is the same as your OS package manager.
+
+The `amdgpu-install` script is a wrapper around the package manager. The same
+packages are installed by this script as the package manager system.
+
+The installer automates the installation process for the AMDGPU
+and ROCm stack. It handles the complete installation process
+for ROCm, including setting up the repository, cleaning the system, updating,
+and installing the desired drivers and meta-packages. Users who are
+less familiar with the package manager can choose this method for ROCm
+installation.
+
+(installation-types)=
+
+## Single Version ROCm install versus Multi-Version
+
+ROCm packages are versioned with both semantic versioning that is package
+specific and a ROCm release version.
+
+### Single-version Installation
+
+The single-version ROCm installation refers to the following:
+
+- Installation of a single instance of the ROCm release on a system
+- Use of non-versioned ROCm meta-packages
+
+### Multi-version Installation
+
+The multi-version installation refers to the following:
+
+- Installation of multiple instances of the ROCm stack on a system. Extending
+  the package name and its dependencies with the release version adds the
+  ability to support multiple versions of packages simultaneously.
+- Use of versioned ROCm meta-packages.
+
+```{attention}
+ROCm packages that were previously installed from a single-version installation
+must be removed before proceeding with the multi-version installation to avoid
+conflicts.
+```
+
+```{note}
+Multiversion install is not available for the kernel driver module, also referred to as AMDGPU.
+```
+
+The following image demonstrates the difference between single-version and
+multi-version ROCm installation types:
+
+```{figure-md} install-types
+
+<img src="/data/deploy/linux/image.001.png" alt="">
+
+ROCm Installation Types
+```

docs/deploy/linux/installer/index.md

@@ -0,0 +1,31 @@
+# AMDGPU Install Script
+
+::::{grid} 2 3 3 3
+:gutter: 1
+
+:::{grid-item-card} Install
+:link: install
+:link-type: doc
+
+How to install ROCm?
+:::
+
+:::{grid-item-card} Upgrade
+:link: upgrade
+:link-type: doc
+
+Instructions for upgrading an existing ROCm installation.
+:::
+
+:::{grid-item-card} Uninstall
+:link: uninstall
+:link-type: doc
+
+Steps for removing ROCm packages libraries and tools.
+:::
+
+::::
+
+## See Also
+
+- {doc}`/release/gpu_os_support`

docs/deploy/linux/installer/install.md

@@ -0,0 +1,331 @@
+# Installation with install script
+
+Prior to beginning, please ensure you have the [prerequisites](../prerequisites)
+installed.
+
+## Download the Installer Script
+
+To download and install the `amdgpu-install` script on the system, use the
+following commands based on your distribution.
+
+::::::{tab-set}
+:::::{tab-item} Ubuntu
+:sync: ubuntu
+
+::::{tab-set}
+:::{tab-item} Ubuntu 18.04
+:sync: ubuntu-18.04
+
+```shell
+sudo apt update
+wget https://repo.radeon.com/amdgpu-install/22.20/ubuntu/bionic/amdgpu-install_22.20.50200-1_all.deb
+sudo apt install ./amdgpu-install_22.20.50200-1_all.deb
+```
+
+:::
+:::{tab-item} Ubuntu 20.04
+:sync: ubuntu-20.04
+
+```shell
+sudo apt update
+wget https://repo.radeon.com/amdgpu-install/22.20/ubuntu/focal/amdgpu-install_22.20.50200-1_all.deb
+sudo apt install ./amdgpu-install_22.20.50200-1_all.deb
+```
+
+:::
+::::
+:::::
+:::::{tab-item} Red Hat Enterprise Linux
+:sync: RHEL
+
+::::{tab-set}
+:::{tab-item} RHEL 7.9
+:sync: RHEL-7.9
+:sync: RHEL-7
+
+```shell
+sudo yum install https://repo.radeon.com/amdgpu-install/22.20/rhel/7.9/amdgpu-install-22.20.50200-1.el7.noarch.rpm
+```
+
+:::
+:::{tab-item} RHEL 8.5
+:sync: RHEL-8.5
+:sync: RHEL-8
+
+```shell
+sudo yum install https://repo.radeon.com/amdgpu-install/22.20/rhel/8.5/amdgpu-install-22.20.50200-1.el8.noarch.rpm
+```
+
+:::
+:::{tab-item} RHEL 8.6
+:sync: RHEL-8.6
+:sync: RHEL-8
+
+```shell
+sudo yum install https://repo.radeon.com/amdgpu-install/22.20/rhel/8.6/amdgpu-install-22.20.50200-1.el8.noarch.rpm
+```
+
+:::
+::::
+:::::
+:::::{tab-item} SUSE Linux Enterprise Server 15
+:sync: SLES15
+
+::::{tab-set}
+:::{tab-item} Service Pack 4
+:sync: SLES15-SP4
+
+```shell
+sudo zypper --no-gpg-checks install https://repo.radeon.com/amdgpu-install/22.20/sle/15.4/amdgpu-install-22.20.50200-1.noarch.rpm
+```
+
+:::
+:::{tab-item} Service Pack 3
+:sync: SLES15-SP3
+
+```shell
+sudo zypper --no-gpg-checks install https://repo.radeon.com/amdgpu-install/22.20/sle/15.3/amdgpu-install-22.20.50200-1.noarch.rpm
+```
+
+:::
+::::
+:::::
+::::::
+
+## Use cases
+
+Instead of installing individual applications or libraries the installer script
+groups packages into specific use cases, matching typical workflows and runtimes.
+
+To display a list of available use cases execute the command:
+
+```shell
+sudo amdgpu-install --list-usecase
+```
+
+The available use-cases will be printed in a format similar to the example
+output below.
+
+```none
+If --usecase option is not present, the default selection is "graphics,opencl,hip"
+
+Available use cases:
+rocm(for users and developers requiring full ROCm stack)
+- OpenCL (ROCr/KFD based) runtime
+- HIP runtimes
+- Machine learning framework
+- All ROCm libraries and applications
+- ROCm Compiler and device libraries
+- ROCr runtime and thunk
+lrt(for users of applications requiring ROCm runtime)
+- ROCm Compiler and device libraries
+- ROCr runtime and thunk
+opencl(for users of applications requiring OpenCL on Vega or
+later products)
+- ROCr based OpenCL
+- ROCm Language runtime
+
+openclsdk (for application developers requiring ROCr based OpenCL)
+- ROCr based OpenCL
+- ROCm Language runtime
+- development and SDK files for ROCr based OpenCL
+
+hip(for users of HIP runtime on AMD products)
+- HIP runtimes
+hiplibsdk (for application developers requiring HIP on AMD products)
+- HIP runtimes
+- ROCm math libraries
+- HIP development libraries
+```
+
+To install use cases specific to your requirements, use the installer
+`amdgpu-install` as follows:
+
+- To install a single use case add it with the `--usecase` option:
+
+  ```shell
+  sudo amdgpu-install --usecase=rocm
+  ```
+
+- For multiple use cases separate them with commas:
+
+  ```shell
+  sudo amdgpu-install --usecase=hiplibsdk,rocm
+  ```
+
+## Single-version ROCm Installation
+
+By default (without the `--rocmrelease` option)
+the installer script will install packages in the single-version layout.
+
+## Multi-version ROCm Installation
+
+For the multi-version ROCm installation you must use the installer script from
+the latest release of ROCm that you wish to install.
+
+**Example:** If you want to install ROCm releases 5.1.3 and 5.2
+simultaneously, you are required to download the installer from the latest ROCm
+release v5.2.
+
+### Add Required Repositories
+
+You must add the ROCm repositories manually for all ROCm releases
+you want to install except the latest one. The `amdgpu-install` script
+automatically adds the required repositories for the latest release.
+
+Run the following commands based on your distribution to add the repositories:
+
+::::::{tab-set}
+:::::{tab-item} Ubuntu
+:sync: ubuntu
+
+::::{tab-set}
+:::{tab-item} Ubuntu 18.04
+:sync: ubuntu-18.04
+
+```shell
+for ver in 5.1.3; do
+echo "deb [arch=amd64 signed-by=/etc/apt/trusted.gpg.d/rocm-keyring.gpg] https://repo.radeon.com/rocm/apt/$ver bionic main" | sudo tee /etc/apt/sources.list.d/rocm.list
+done
+echo -e 'Package: *\nPin: release o=repo.radeon.com\nPin-Priority: 600' | sudo tee /etc/apt/preferences.d/rocm-pin-600
+sudo apt update
+```
+
+:::
+:::{tab-item} Ubuntu 20.04
+:sync: ubuntu-20.04
+
+```shell
+for ver in 5.1.3; do
+echo "deb [arch=amd64 signed-by=/etc/apt/trusted.gpg.d/rocm-keyring.gpg] https://repo.radeon.com/rocm/apt/$ver focal main" | sudo tee /etc/apt/sources.list.d/rocm.list
+done
+echo -e 'Package: *\nPin: release o=repo.radeon.com\nPin-Priority: 600' | sudo tee /etc/apt/preferences.d/rocm-pin-600
+sudo apt update
+```
+
+:::
+::::
+:::::
+:::::{tab-item} Red Hat Enterprise Linux
+:sync: RHEL
+
+::::{tab-set}
+:::{tab-item} RHEL 7
+:sync: RHEL-7
+
+```shell
+for ver in 5.1.3; do
+sudo tee --append /etc/yum.repos.d/rocm.repo <<EOF
+[ROCm-$ver]
+name=ROCm$ver
+baseurl=https://repo.radeon.com/rocm/yum/$ver/main
+enabled=1
+priority=50
+gpgcheck=1
+gpgkey=https://repo.radeon.com/rocm/rocm.gpg.key
+EOF
+done
+sudo yum clean all
+```
+
+:::
+:::{tab-item} RHEL 8
+:sync: RHEL-8
+
+```shell
+for ver in 5.1.3; do
+sudo tee --append /etc/yum.repos.d/rocm.repo <<EOF
+[ROCm-$ver]
+name=ROCm$ver
+baseurl=https://repo.radeon.com/rocm/rhel8/$ver/main
+enabled=1
+priority=50
+gpgcheck=1
+gpgkey=https://repo.radeon.com/rocm/rocm.gpg.key
+EOF
+done
+sudo yum clean all
+```
+
+:::
+::::
+:::::
+:::::{tab-item} SUSE Linux Enterprise Server 15
+:sync: SLES15
+
+::::{tab-set}
+:::{tab-item} Service Pack 3
+:sync: SLES15-SP3
+
+```shell
+for ver in 5.1.3; do
+sudo tee --append /etc/zypp/repos.d/rocm.repo <<EOF
+name=rocm
+baseurl=https://repo.radeon.com/rocm/$ver/sle/15.3/main/x86_64
+enabled=1
+gpgcheck=1
+gpgkey=https://repo.radeon.com/rocm/rocm.gpg.key
+EOF
+done
+sudo zypper ref
+```
+
+:::
+:::{tab-item} Service Pack 4
+:sync: SLES15-SP4
+
+```shell
+for ver in 5.1.3; do
+sudo tee --append /etc/zypp/repos.d/rocm.repo <<EOF
+name=rocm
+baseurl=https://repo.radeon.com/rocm/$ver/sle/15.4/main/x86_64
+enabled=1
+gpgcheck=1
+gpgkey=https://repo.radeon.com/rocm/rocm.gpg.key
+EOF
+done
+sudo zypper ref
+```
+
+:::
+::::
+
+:::::
+::::::
+
+### Install packages
+
+Use the installer script as given below:
+
+```none
+sudo amdgpu-install --usecase=rocm --rocmrelease=<release-number-1>
+sudo amdgpu-install --usecase=rocm --rocmrelease=<release-number-2>
+sudo amdgpu-install --usecase=rocm --rocmrelease=<release-number-3>
+```
+
+Following are examples of ROCm multi-version installation. The kernel-mode
+driver, associated with the ROCm release v5.3, will be installed as its latest
+release in the list.
+
+```none
+sudo amdgpu-install --usecase=rocm --rocmrelease=5.1.3
+sudo amdgpu-install --usecase=rocm --rocmrelease=5.2.0
+```
+
+## Additional options
+
+### Unattended installation
+
+Adding `-y` as a parameter to `amdgpu-install` skips user prompts (for
+automation). Example: `amdgpu-install -y --usecase=rocm`
+
+### Skipping kernel mode driver installation
+
+The installer script tries to install the kernel mode driver along with the
+requested use cases. This might be unnecessary as in the case of docker
+containers or you may wish to keep a specific version when using multi-version
+installation, and not have the last installed version overwrite the kernel mode
+driver.
+
+To skip the installation of the kernel-mode driver add the `--no-dkms` option
+when calling the installer script.

docs/deploy/linux/installer/uninstall.md

@@ -0,0 +1,25 @@
+# Installer Script Uninstallation (Linux)
+
+To uninstall all ROCm packages and the kernel-mode driver the following commands
+can be used.
+
+::::{rubric} Uninstalling Single-Version Install
+::::
+
+```console shell
+sudo amdgpu-install --uninstall
+```
+
+::::{rubric} Uninstalling a Specific ROCm Release
+::::
+
+```console shell
+sudo amdgpu-install --uninstall --rocmrelease=<release-number>
+```
+
+::::{rubric} Uninstalling all ROCm Releases
+::::
+
+```console shell
+sudo amdgpu-install --uninstall --rocmrelease=all
+```

docs/deploy/linux/installer/upgrade.md

@@ -0,0 +1,5 @@
+# Upgrading with the Installer Script (Linux)
+
+The upgrade procedure with the installer script is exactly the same as
+installing for 1st time use. Refer to the {doc}`install`
+section on the exact procedure to follow.

docs/deploy/linux/os-native/index.md

@@ -0,0 +1,38 @@
+# Installation via Package manager
+
+::::{grid} 2 3 3 3
+:gutter: 1
+
+:::{grid-item-card} Install
+:link: install
+:link-type: doc
+
+How to install ROCm?
+:::
+
+:::{grid-item-card} Upgrade
+:link: upgrade
+:link-type: doc
+
+Instructions for upgrading an existing ROCm installation.
+:::
+
+:::{grid-item-card} Uninstall
+:link: uninstall
+:link-type: doc
+
+Steps for removing ROCm packages libraries and tools.
+:::
+
+:::{grid-item-card} Package Manager Integration
+:link: package_manager_integration
+:link-type: doc
+
+Information about packages.
+:::
+
+::::
+
+## See Also
+
+- {doc}`/release/gpu_os_support`