update links

Optional/Wrist_Cam_Mount_32x32_UVC_Module/README.md

@@ -17,7 +17,7 @@ This guide provides step-by-step instructions for installing a **Wrist Camera**
 ## Required Components
 ### Hardware:
 - **USB Camera Module** (1) - this is the [recommended model](https://www.amazon.com/innomaker-Computer-Raspberry-Support-Windows/dp/B0CNCSFQC1/ref=pd_lpo_d_sccl_3/132-7372155-9780230?pd_rd_w=eYz4L&content-id=amzn1.sym.4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_p=4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_r=XC3EXZRSSXKDB1G0Z5D7&pd_rd_wg=1wTpn&pd_rd_r=932b1976-9ac7-4cef-9774-f0f9c3acb804&pd_rd_i=B0CNCSFQC1&psc=1), but any 32mm x 32mm USB camera module with min 720p / 30 fps spec will likely work
-- [3D-printed Wrist Roll Replacement](stl/Camera_Holder_Alternate_MF.stl) (1)
+- [3D-printed Wrist Roll Replacement](Optional/Wrist_Cam_Mount_32x32_UVC_Module/stl/Camera_Holder_Alternate_MF.stl) (1)
 - **M2 Screws** (4) - these are the smaller screws that came with your Feetech servos.
 
 

Optional/Wrist_Cam_Mount_Vinmooog_Webcam/README.md

@@ -7,8 +7,8 @@ This guide provides step-by-step instructions for installing a **wrist camera**
 ### Hardware:
 - [Vinmooog Webcam](https://www.amazon.fr/Vinmooog-equipement-Microphone-Enregistrement-conf%C3%A9rences/dp/B0BG1YJWFN/)
 - **3D-printed parts:**
-  - `Optional/Camera_Holder/stl/Updated_Wrist_Camera_Insert.stl` (Print **1x**)
-  - `Optional/Camera_Holder/stl/Webcam_Mount_Wrist v2.stl` (Print **1x**)
+  - [Modified wirst](Optional/Wrist_Cam_Mount_Vinmooog_Webcam/stl/Updated_Wrist_Camera_Insert.stl) (Print **1x**), not needed for SO-101
+  - [Mount](Optional/Wrist_Cam_Mount_Vinmooog_Webcam/stl/Webcam_Mount_Wrist.stl) (Print **1x**)
 - **Fasteners:**
   - 3x **M3 Nut**
   - 1x **M3x12mm bolt**