Bump v21.0.0-nightly.20220630

Signed-off-by: Josh Soref <2119212+jsoref@users.noreply.github.com>

.circleci/config/base.yml

@@ -527,15 +527,6 @@ step-install-gnutar-on-mac: &step-install-gnutar-on-mac
         ln -fs /usr/local/bin/gtar /usr/local/bin/tar
       fi
 
-step-install-python2-on-mac: &step-install-python2-on-mac
-  run:
-    name: Install python2 on macos
-    command: |
-      if [ "`uname`" == "Darwin" ]; then
-        curl -O https://www.python.org/ftp/python/2.7.18/python-2.7.18-macosx10.9.pkg
-        sudo installer -pkg python-2.7.18-macosx10.9.pkg -target /
-      fi
-
 step-gn-gen-default: &step-gn-gen-default
   run:
     name: Default GN gen
@@ -558,7 +549,7 @@ step-gn-check: &step-gn-check
 step-electron-build: &step-electron-build
   run:
     name: Electron build
-    no_output_timeout: 30m
+    no_output_timeout: 60m
     command: |
       # On arm platforms we generate a cross-arch ffmpeg that ninja does not seem
       # to realize is not correct / should be rebuilt.  We delete it here so it is
@@ -648,7 +639,7 @@ step-electron-publish: &step-electron-publish
         echo 'Uploading Electron release distribution to Azure'
         script/release/uploaders/upload.py --verbose --UPLOAD_TO_STORAGE
       else
-        echo 'Uploading Electron release distribution to Github releases'
+        echo 'Uploading Electron release distribution to GitHub releases'
         script/release/uploaders/upload.py --verbose
       fi
 
@@ -1011,7 +1002,7 @@ steps-electron-gn-check: &steps-electron-gn-check
     - *step-checkout-electron
     - *step-depot-tools-get
     - *step-depot-tools-add-to-path
-    - *step-install-python2-on-mac
+    - install-python2-mac
     - *step-setup-env-for-build
     - *step-setup-goma-for-build
     - *step-generate-deps-hash
@@ -1130,6 +1121,31 @@ steps-test-node: &steps-test-node
 
 # Command Aliases
 commands:
+  install-python2-mac:
+    steps:
+      - restore_cache:
+          keys:
+            - v2.7.18-python-cache-{{ arch }}
+          name: Restore python cache
+      - run:
+          name: Install python2 on macos
+          command: |
+            if [ "`uname`" == "Darwin" ]; then
+              if [ ! -f "python-downloads/python-2.7.18-macosx10.9.pkg" ]; then
+                mkdir python-downloads
+                echo 'Downloading Python 2.7.18'
+                curl -O https://dev-cdn.electronjs.org/python/python-2.7.18-macosx10.9.pkg
+                mv python-2.7.18-macosx10.9.pkg python-downloads
+              else
+                echo 'Using Python install from cache'
+              fi
+              sudo installer -pkg python-downloads/python-2.7.18-macosx10.9.pkg -target /        
+            fi
+      - save_cache:
+          paths:
+            - python-downloads
+          key: v2.7.18-python-cache-{{ arch }}
+          name: Persisting python cache
   maybe-restore-portaled-src-cache:
     parameters:
       halt-if-successful:
@@ -1296,7 +1312,7 @@ commands:
             - run: rm -rf src/electron
       - *step-restore-brew-cache
       - *step-install-gnutar-on-mac
-      - *step-install-python2-on-mac
+      - install-python2-mac
       - *step-save-brew-cache
       - when:
           condition: << parameters.build >>
@@ -1488,7 +1504,7 @@ commands:
             - *step-depot-tools-get
       - *step-depot-tools-add-to-path
       - *step-restore-brew-cache
-      - *step-install-python2-on-mac
+      - install-python2-mac
       - *step-get-more-space-on-mac
       - when:
           condition: << parameters.checkout >>

.github/workflows/release_dependency_versions.yml

@@ -0,0 +1,31 @@
+name: Trigger Major Release Dependency Updates
+
+on:
+  release:
+    types: [published]
+
+env:
+  GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+jobs:
+  check_tag:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v3
+    - name: Check Tag
+      run: |
+        if [[ ${{ github.event.ref }} =~ ^refs/tags/v[0-9]+\.0\.0$ ]]; then
+          echo ::set-output name=should_release::true
+        fi
+  trigger:
+    runs-on: ubuntu-latest
+    needs: check_tag
+    if: jobs.check_tag.outputs.should_release == 'true'
+    steps:
+      - uses: actions/checkout@v3
+      - name: Trigger New chromedriver Release
+        run: |
+          gh api /repos/:owner/chromedriver/actions/workflows/release.yml/dispatches --input - <<< '{"ref":"main","inputs":{"version":"${{ github.event.release.tag_name }}"}}'
+      - name: Trigger New mksnapshot Release
+        run: |
+          gh api /repos/:owner/mksnapshot/actions/workflows/release.yml/dispatches --input - <<< '{"ref":"main","inputs":{"version":"${{ github.event.release.tag_name }}"}}'

.husky/.gitignore

@@ -1 +0,0 @@
-_

.markdownlint.json

@@ -23,7 +23,5 @@
     "br_spaces": 0
   },
   "single-h1": false,
-  "no-inline-html": {
-    "allowed_elements": ["br"]
-  }
+  "no-inline-html": false
 }

BUILD.gn

@@ -37,7 +37,7 @@ if (is_mac) {
   import("build/rules.gni")
 
   assert(
-      mac_deployment_target == "10.11.0",
+      mac_deployment_target == "10.13",
       "Chromium has updated the mac_deployment_target, please update this assert, update the supported versions documentation (docs/tutorial/support.md) and flag this as a breaking change")
 }
 
@@ -87,7 +87,10 @@ if (is_linux) {
   # implementation. In future, this file can be extended to contain
   # gtk4 stubs to switch gtk version in runtime.
   generate_stubs("electron_gtk_stubs") {
-    sigs = [ "shell/browser/ui/electron_gtk.sigs" ]
+    sigs = [
+      "shell/browser/ui/electron_gdk_pixbuf.sigs",
+      "shell/browser/ui/electron_gtk.sigs",
+    ]
     extra_header = "shell/browser/ui/electron_gtk.fragment"
     output_name = "electron_gtk_stubs"
     public_deps = [ "//ui/gtk:gtk_config" ]
@@ -132,7 +135,7 @@ config("electron_lib_config") {
   include_dirs = [ "." ]
 }
 
-# We geneate the definitions twice here, once in //electron/electron.d.ts
+# We generate the definitions twice here, once in //electron/electron.d.ts
 # and once in $target_gen_dir
 # The one in $target_gen_dir is used for the actual TSC build later one
 # and the one in //electron/electron.d.ts is used by your IDE (vscode)
@@ -371,6 +374,7 @@ source_set("electron_lib") {
     "//chrome/app/resources:platform_locale_settings",
     "//components/autofill/core/common:features",
     "//components/certificate_transparency",
+    "//components/embedder_support:browser_util",
     "//components/language/core/browser",
     "//components/net_log",
     "//components/network_hints/browser",
@@ -667,8 +671,6 @@ source_set("electron_lib") {
 
   if (enable_basic_printing) {
     sources += [
-      "shell/browser/printing/print_preview_message_handler.cc",
-      "shell/browser/printing/print_preview_message_handler.h",
       "shell/browser/printing/print_view_manager_electron.cc",
       "shell/browser/printing/print_view_manager_electron.h",
       "shell/renderer/printing/print_render_frame_helper_delegate.cc",
@@ -726,14 +728,6 @@ source_set("electron_lib") {
 
   sources += get_target_outputs(":electron_fuses")
 
-  if (is_win && enable_win_dark_mode_window_ui) {
-    sources += [
-      "shell/browser/win/dark_mode.cc",
-      "shell/browser/win/dark_mode.h",
-    ]
-    libs += [ "uxtheme.lib" ]
-  }
-
   if (allow_runtime_configurable_key_storage) {
     defines += [ "ALLOW_RUNTIME_CONFIGURABLE_KEY_STORAGE" ]
   }

DEPS

@@ -2,9 +2,9 @@ gclient_gn_args_from = 'src'
 
 vars = {
   'chromium_version':
-    '103.0.5044.0',
+    '105.0.5129.0',
   'node_version':
-    'v16.15.0',
+    'v16.15.1',
   'nan_version':
     '16fa32231e2ccd89d2804b3f765319128b20c4ac',
   'squirrel.mac_version':

ELECTRON_VERSION

@@ -1 +1 @@
-20.0.0-nightly.20220524
+21.0.0-nightly.20220630

appveyor.yml

@@ -3,7 +3,7 @@
 #  - "GN_EXTRA_ARGS" Additional gn arguments for a build config,
 #      e.g. 'target_cpu="x86"' to build for a 32bit platform.
 #      https://gn.googlesource.com/gn/+/master/docs/reference.md#target_cpu
-#      Don't forget to set up "NPM_CONFIG_ARCH" and "TARGET_ARCH" accordningly
+#      Don't forget to set up "NPM_CONFIG_ARCH" and "TARGET_ARCH" accordingly
 #      if you pass a custom value for 'target_cpu'.
 #  - "ELECTRON_RELEASE" Set it to '1' upload binaries on success.
 #  - "NPM_CONFIG_ARCH" E.g. 'x86'. Is used to build native Node.js modules.
@@ -12,7 +12,7 @@
 #      Is used in some publishing scripts, but does NOT affect the Electron binary.
 #      Must match 'target_cpu' passed to "GN_EXTRA_ARGS" and "NPM_CONFIG_ARCH" value.
 #  - "UPLOAD_TO_STORAGE" Set it to '1' upload a release to the Azure bucket.
-#      Otherwise the release will be uploaded to the Github Releases.
+#      Otherwise the release will be uploaded to the GitHub Releases.
 #      (The value is only checked if "ELECTRON_RELEASE" is defined.)
 #
 # The publishing scripts expect access tokens to be defined as env vars,
@@ -34,16 +34,6 @@ environment:
   MOCHA_REPORTER: mocha-multi-reporters
   MOCHA_MULTI_REPORTERS: mocha-appveyor-reporter, tap
   GOMA_FALLBACK_ON_AUTH_FAILURE: true
-notifications:
-  - provider: Webhook
-    url: https://electron-mission-control.herokuapp.com/rest/appveyor-hook
-    method: POST
-    headers:
-      x-mission-control-secret:
-        secure: 90BLVPcqhJPG7d24v0q/RRray6W3wDQ8uVQlQjOHaBWkw1i8FoA1lsjr2C/v1dVok+tS2Pi6KxDctPUkwIb4T27u4RhvmcPzQhVpfwVJAG9oNtq+yKN7vzHfg7k/pojEzVdJpQLzeJGcSrZu7VY39Q==
-    on_build_success: false
-    on_build_failure: true
-    on_build_status_changed: false
 build_script:
   - ps: >-
       if(($env:APPVEYOR_PULL_REQUEST_HEAD_REPO_NAME -split "/")[0] -eq ($env:APPVEYOR_REPO_NAME -split "/")[0]) {
@@ -180,16 +170,19 @@ build_script:
   - python %LOCAL_GOMA_DIR%\goma_ctl.py stat
   - python3 electron/build/profile_toolchain.py --output-json=out/Default/windows_toolchain_profile.json
   - 7z a node_headers.zip out\Default\gen\node_headers
+  # Temporarily disable symbol generation on 32-bit Windows due to failures  
   - ps: >-
-      if ($env:GN_CONFIG -eq 'release') {
+      if ($env:GN_CONFIG -eq 'release' -And $env:TARGET_ARCH -ne 'ia32') {
         # Needed for msdia140.dll on 64-bit windows
         $env:Path += ";$pwd\third_party\llvm-build\Release+Asserts\bin"
         ninja -C out/Default electron:electron_symbols
       }
   - ps: >-
       if ($env:GN_CONFIG -eq 'release') {
-        python electron\script\zip-symbols.py
-        appveyor-retry appveyor PushArtifact out/Default/symbols.zip
+        if ($env:TARGET_ARCH -ne 'ia32') {
+          python electron\script\zip-symbols.py
+          appveyor-retry appveyor PushArtifact out/Default/symbols.zip
+        }
       } else {
         # It's useful to have pdb files when debugging testing builds that are
         # built on CI.
@@ -211,10 +204,9 @@ test_script:
         echo "Skipping tests for $env:GN_CONFIG build"
       }
   - cd electron
-  # CalculateNativeWinOcclusion is disabled due to https://bugs.chromium.org/p/chromium/issues/detail?id=1139022
-  - if "%RUN_TESTS%"=="true" ( echo Running main test suite & node script/yarn test -- --trace-uncaught --runners=main --enable-logging=file --log-file=%cd%\electron.log --disable-features=CalculateNativeWinOcclusion )
-  - if "%RUN_TESTS%"=="true" ( echo Running remote test suite & node script/yarn test -- --trace-uncaught --runners=remote --runTestFilesSeperately --enable-logging=file --log-file=%cd%\electron.log --disable-features=CalculateNativeWinOcclusion )
-  - if "%RUN_TESTS%"=="true" ( echo Running native test suite & node script/yarn test -- --trace-uncaught --runners=native --enable-logging=file --log-file=%cd%\electron.log --disable-features=CalculateNativeWinOcclusion )  
+  - if "%RUN_TESTS%"=="true" ( echo Running main test suite & node script/yarn test -- --trace-uncaught --runners=main --enable-logging=file --log-file=%cd%\electron.log )
+  - if "%RUN_TESTS%"=="true" ( echo Running remote test suite & node script/yarn test -- --trace-uncaught --runners=remote --runTestFilesSeparately --enable-logging=file --log-file=%cd%\electron.log )
+  - if "%RUN_TESTS%"=="true" ( echo Running native test suite & node script/yarn test -- --trace-uncaught --runners=native --enable-logging=file --log-file=%cd%\electron.log )  
   - cd ..
   - if "%RUN_TESTS%"=="true" ( echo Verifying non proprietary ffmpeg & python electron\script\verify-ffmpeg.py --build-dir out\Default --source-root %cd% --ffmpeg-path out\ffmpeg )
   - echo "About to verify mksnapshot"

build/args/all.gn

@@ -45,3 +45,7 @@ enable_cet_shadow_stack = false
 # V8 in the browser process.
 # Ref: https://source.chromium.org/chromium/chromium/src/+/45fba672185aae233e75d6ddc81ea1e0b30db050:v8/BUILD.gn;l=281
 is_cfi = false
+
+# TODO(nornagon): this is disabled until node.js's internals can be made
+# compatible with sandboxed pointers.
+v8_enable_sandboxed_pointers = false

build/fuses/build.py

@@ -19,17 +19,13 @@ TEMPLATE_H = """
 #define FUSE_EXPORT __attribute__((visibility("default")))
 #endif
 
-namespace electron {
-
-namespace fuses {
+namespace electron::fuses {
 
 extern const volatile char kFuseWire[];
 
 {getters}
 
-}  // namespace fuses
-
-}  // namespace electron
+}  // namespace electron::fuses
 
 #endif  // ELECTRON_FUSES_H_
 """
@@ -37,17 +33,13 @@ extern const volatile char kFuseWire[];
 TEMPLATE_CC = """
 #include "electron/fuses.h"
 
-namespace electron {
-
-namespace fuses {
+namespace electron::fuses {
 
 const volatile char kFuseWire[] = { /* sentinel */ {sentinel}, /* fuse_version */ {fuse_version}, /* fuse_wire_length */ {fuse_wire_length}, /* fuse_wire */ {initial_config}};
 
 {getters}
 
-}
-
-}
+}  // namespace electron:fuses
 """
 
 with open(os.path.join(dir_path, "fuses.json5"), 'r') as f:

build/js2c.py

@@ -8,9 +8,7 @@ TEMPLATE = """
 #include "node_native_module.h"
 #include "node_internals.h"
 
-namespace node {{
-
-namespace native_module {{
+namespace node::native_module {{
 
 {definitions}
 
@@ -18,9 +16,7 @@ void NativeModuleLoader::LoadEmbedderJavaScriptSource() {{
   {initializers}
 }}
 
-}}  // namespace native_module
-
-}}  // namespace node
+}}  // namespace node::native_module
 """
 
 def main():

build/mac/make_locale_dirs.py

@@ -4,7 +4,7 @@
 # Cocoa .app bundle. The presence of these empty directories is sufficient to
 # convince Cocoa that the application supports the named localization, even if
 # an InfoPlist.strings file is not provided. Chrome uses these empty locale
-# directoires for its helper executable bundles, which do not otherwise
+# directories for its helper executable bundles, which do not otherwise
 # require any direct Cocoa locale support.
 
 import os

build/node.gni

@@ -1,6 +1,6 @@
 template("node_action") {
   assert(defined(invoker.script), "Need script path to run")
-  assert(defined(invoker.args), "Need script argumets")
+  assert(defined(invoker.args), "Need script arguments")
 
   action(target_name) {
     forward_variables_from(invoker,

build/npm.gni

@@ -1,7 +1,7 @@
 template("npm_action") {
   assert(defined(invoker.script),
          "Need script name to run (must be defined in package.json)")
-  assert(defined(invoker.args), "Need script argumets")
+  assert(defined(invoker.args), "Need script arguments")
 
   action("npm_pre_flight_" + target_name) {
     inputs = [

build/rules.gni

@@ -51,7 +51,7 @@ template("compile_ib_files") {
 # Template to compile and package Mac XIB files as bundle data.
 # Arguments
 #     sources:
-#         list of string, sources to comiple
+#         list of string, sources to compile
 #     output_path:
 #         (optional) string, the path to use for the outputs list in the
 #         bundle_data step. If unspecified, defaults to bundle_resources_dir.

buildflags/BUILD.gn

@@ -19,7 +19,6 @@ buildflag_header("buildflags") {
     "ENABLE_ELECTRON_EXTENSIONS=$enable_electron_extensions",
     "ENABLE_BUILTIN_SPELLCHECKER=$enable_builtin_spellchecker",
     "ENABLE_PICTURE_IN_PICTURE=$enable_picture_in_picture",
-    "ENABLE_WIN_DARK_MODE_WINDOW_UI=$enable_win_dark_mode_window_ui",
     "OVERRIDE_LOCATION_PROVIDER=$enable_fake_location_provider",
   ]
 }

buildflags/buildflags.gni

@@ -31,7 +31,4 @@ declare_args() {
 
   # Enable Spellchecker support
   enable_builtin_spellchecker = true
-
-  # Undocumented Windows dark mode API
-  enable_win_dark_mode_window_ui = false
 }

chromium_src/BUILD.gn

@@ -92,6 +92,7 @@ static_library("chrome") {
       "//chrome/browser/media/webrtc/system_media_capture_permissions_stats_mac.h",
       "//chrome/browser/media/webrtc/system_media_capture_permissions_stats_mac.mm",
       "//chrome/browser/media/webrtc/window_icon_util_mac.mm",
+      "//chrome/browser/platform_util_mac.mm",
       "//chrome/browser/process_singleton_mac.mm",
       "//chrome/browser/ui/views/eye_dropper/eye_dropper_view_mac.h",
       "//chrome/browser/ui/views/eye_dropper/eye_dropper_view_mac.mm",
@@ -216,6 +217,8 @@ static_library("chrome") {
       "//chrome/browser/printing/printer_query.h",
       "//chrome/browser/printing/printing_service.cc",
       "//chrome/browser/printing/printing_service.h",
+      "//components/printing/browser/print_to_pdf/pdf_print_utils.cc",
+      "//components/printing/browser/print_to_pdf/pdf_print_utils.h",
     ]
 
     if (enable_oop_printing) {

docs/README.md

@@ -69,9 +69,6 @@ an issue:
   * [Windows Store](tutorial/windows-store-guide.md)
   * [Snapcraft](tutorial/snapcraft.md)
 * [Updates](tutorial/updates.md)
-  * [Deploying an Update Server](tutorial/updates.md#deploying-an-update-server)
-  * [Implementing Updates in Your App](tutorial/updates.md#implementing-updates-in-your-app)
-  * [Applying Updates](tutorial/updates.md#applying-updates)
 * [Getting Support](tutorial/support.md)
 
 ## Detailed Tutorials

docs/api/app.md

@@ -1381,7 +1381,7 @@ method returns false. If we fail to perform the copy, then this method will
 throw an error. The message in the error should be informative and tell
 you exactly what went wrong.
 
-By default, if an app of the same name as the one being moved exists in the Applications directory and is _not_ running, the existing app will be trashed and the active app moved into its place. If it _is_ running, the pre-existing running app will assume focus and the previously active app will quit itself. This behavior can be changed by providing the optional conflict handler, where the boolean returned by the handler determines whether or not the move conflict is resolved with default behavior.  i.e. returning `false` will ensure no further action is taken, returning `true` will result in the default behavior and the method continuing.
+By default, if an app of the same name as the one being moved exists in the Applications directory and is _not_ running, the existing app will be trashed and the active app moved into its place. If it _is_ running, the preexisting running app will assume focus and the previously active app will quit itself. This behavior can be changed by providing the optional conflict handler, where the boolean returned by the handler determines whether or not the move conflict is resolved with default behavior.  i.e. returning `false` will ensure no further action is taken, returning `true` will result in the default behavior and the method continuing.
 
 For example:
 

docs/api/browser-window.md

@@ -425,13 +425,17 @@ Possible values are:
 
 * On Linux, possible types are `desktop`, `dock`, `toolbar`, `splash`,
   `notification`.
-* On macOS, possible types are `desktop`, `textured`.
+* On macOS, possible types are `desktop`, `textured`, `panel`.
   * The `textured` type adds metal gradient appearance
-    (`NSTexturedBackgroundWindowMask`).
+    (`NSWindowStyleMaskTexturedBackground`).
   * The `desktop` type places the window at the desktop background window level
     (`kCGDesktopWindowLevel - 1`). Note that desktop window will not receive
     focus, keyboard or mouse events, but you can use `globalShortcut` to receive
     input sparingly.
+  * The `panel` type enables the window to float on top of full-screened apps
+    by adding the `NSWindowStyleMaskNonactivatingPanel` style mask,normally
+    reserved for NSPanel, at runtime. Also, the window will appear on all
+    spaces (desktops).
 * On Windows, possible type is `toolbar`.
 
 ### Instance Events

docs/api/session.md

@@ -281,7 +281,7 @@ Returns:
 * `event` Event
 * `details` Object
   * `device` [HIDDevice[]](structures/hid-device.md)
-  * `frame` [WebFrameMain](web-frame-main.md)
+  * `origin` string (optional) - The origin that the device has been revoked from.
 
 Emitted after `HIDDevice.forget()` has been called.  This event can be used
 to help maintain persistent storage of permissions when
@@ -705,7 +705,6 @@ session.fromPartition('some-partition').setPermissionCheckHandler((webContents,
     * `deviceType` string - The type of device that permission is being requested on, can be `hid` or `serial`.
     * `origin` string - The origin URL of the device permission check.
     * `device` [HIDDevice](structures/hid-device.md) | [SerialPort](structures/serial-port.md)- the device that permission is being requested for.
-    * `frame` [WebFrameMain](web-frame-main.md) - WebFrameMain checking the device permission.
 
 Sets the handler which can be used to respond to device permission checks for the `session`.
 Returning `true` will allow the device to be permitted and `false` will reject it.
@@ -713,8 +712,8 @@ To clear the handler, call `setDevicePermissionHandler(null)`.
 This handler can be used to provide default permissioning to devices without first calling for permission
 to devices (eg via `navigator.hid.requestDevice`).  If this handler is not defined, the default device
 permissions as granted through device selection (eg via `navigator.hid.requestDevice`) will be used.
-Additionally, the default behavior of Electron is to store granted device permision through the lifetime
-of the corresponding WebContents.  If longer term storage is needed, a developer can store granted device
+Additionally, the default behavior of Electron is to store granted device permision in memory.
+If longer term storage is needed, a developer can store granted device
 permissions (eg when handling the `select-hid-device` event) and then read from that storage with `setDevicePermissionHandler`.
 
 ```javascript

docs/api/web-contents.md

@@ -1428,7 +1428,7 @@ Returns `Promise<PrinterInfo[]>` - Resolves with a [`PrinterInfo[]`](structures/
   * `header` string (optional) - string to be printed as page header.
   * `footer` string (optional) - string to be printed as page footer.
   * `pageSize` string | Size (optional) - Specify page size of the printed document. Can be `A3`,
-  `A4`, `A5`, `Legal`, `Letter`, `Tabloid` or an Object containing `height`.
+  `A4`, `A5`, `Legal`, `Letter`, `Tabloid` or an Object containing `height` and `width`.
 * `callback` Function (optional)
   * `success` boolean - Indicates success of the print call.
   * `failureReason` string - Error description called back if the print fails.
@@ -1459,43 +1459,28 @@ win.webContents.print(options, (success, errorType) => {
 #### `contents.printToPDF(options)`
 
 * `options` Object
-  * `headerFooter` Record<string, string> (optional) - the header and footer for the PDF.
-    * `title` string - The title for the PDF header.
-    * `url` string - the url for the PDF footer.
-  * `landscape` boolean (optional) - `true` for landscape, `false` for portrait.
-  * `marginsType` Integer (optional) - Specifies the type of margins to use. Uses 0 for
-    default margin, 1 for no margin, and 2 for minimum margin.
-  * `scaleFactor` number (optional) - The scale factor of the web page. Can range from 0 to 100.
-  * `pageRanges` Record<string, number> (optional) - The page range to print.
-    * `from` number - Index of the first page to print (0-based).
-    * `to` number - Index of the last page to print (inclusive) (0-based).
-  * `pageSize` string | Size (optional) - Specify page size of the generated PDF. Can be `A3`,
-  `A4`, `A5`, `Legal`, `Letter`, `Tabloid` or an Object containing `height` and `width` in microns.
-  * `printBackground` boolean (optional) - Whether to print CSS backgrounds.
-  * `printSelectionOnly` boolean (optional) - Whether to print selection only.
+  * `landscape` boolean (optional) - Paper orientation.`true` for landscape, `false` for portrait. Defaults to false.
+  * `displayHeaderFooter` boolean (optional) - Whether to display header and footer. Defaults to false.
+  * `printBackground` boolean (optional) - Whether to print background graphics. Defaults to false.
+  * `scale` number(optional)  - Scale of the webpage rendering. Defaults to 1.
+  * `pageSize` string | Size (optional) - Specify page size of the generated PDF. Can be `A0`, `A1`, `A2`, `A3`,
+  `A4`, `A5`, `A6`, `Legal`, `Letter`, `Tabloid`, `Ledger`, or an Object containing `height` and `width` in inches. Defaults to `Letter`.
+  * `margins` Object (optional)
+    * `top` number (optional) - Top margin in inches. Defaults to 1cm (~0.4 inches).
+    * `bottom` number (optional) - Bottom margin in inches. Defaults to 1cm (~0.4 inches).
+    * `left` number (optional) - Left margin in inches. Defaults to 1cm (~0.4 inches).
+    * `right` number (optional) - Right margin in inches. Defaults to 1cm (~0.4 inches).
+  * `pageRanges` string (optional) - Paper ranges to print, e.g., '1-5, 8, 11-13'. Defaults to the empty string, which means print all pages.
+  * `headerTemplate` string (optional) - HTML template for the print header. Should be valid HTML markup with following classes used to inject printing values into them: `date` (formatted print date), `title` (document title), `url` (document location), `pageNumber` (current page number) and `totalPages` (total pages in the document). For example, `<span class=title></span>` would generate span containing the title.
+  * `footerTemplate` string (optional) - HTML template for the print footer. Should use the same format as the `headerTemplate`.
+  * `preferCSSPageSize` boolean (optional) - Whether or not to prefer page size as defined by css. Defaults to false, in which case the content will be scaled to fit the paper size.
 
 Returns `Promise<Buffer>` - Resolves with the generated PDF data.
 
-Prints window's web page as PDF with Chromium's preview printing custom
-settings.
+Prints the window's web page as PDF.
 
 The `landscape` will be ignored if `@page` CSS at-rule is used in the web page.
 
-By default, an empty `options` will be regarded as:
-
-```javascript
-{
-  marginsType: 0,
-  printBackground: false,
-  printSelectionOnly: false,
-  landscape: false,
-  pageSize: 'A4',
-  scaleFactor: 100
-}
-```
-
-Use `page-break-before: always;` CSS style to force to print to a new page.
-
 An example of `webContents.printToPDF`:
 
 ```javascript
@@ -1504,7 +1489,7 @@ const fs = require('fs')
 const path = require('path')
 const os = require('os')
 
-const win = new BrowserWindow({ width: 800, height: 600 })
+const win = new BrowserWindow()
 win.loadURL('http://github.com')
 
 win.webContents.on('did-finish-load', () => {
@@ -1521,6 +1506,8 @@ win.webContents.on('did-finish-load', () => {
 })
 ```
 
+See [Page.printToPdf](https://chromedevtools.github.io/devtools-protocol/tot/Page/#method-printToPDF) for more information.
+
 #### `contents.addWorkSpace(path)`
 
 * `path` string

docs/api/web-frame-main.md

@@ -16,7 +16,7 @@ win.loadURL('https://twitter.com')
 
 win.webContents.on(
   'did-frame-navigate',
-  (event, url, isMainFrame, frameProcessId, frameRoutingId) => {
+  (event, url, httpResponseCode, httpStatusText, isMainFrame, frameProcessId, frameRoutingId) => {
     const frame = webFrameMain.fromId(frameProcessId, frameRoutingId)
     if (frame) {
       const code = 'document.body.innerHTML = document.body.innerHTML.replaceAll("heck", "h*ck")'

docs/api/webview-tag.md

@@ -565,21 +565,21 @@ Prints `webview`'s web page. Same as `webContents.print([options])`.
 ### `<webview>.printToPDF(options)`
 
 * `options` Object
-  * `headerFooter` Record<string, string> (optional) - the header and footer for the PDF.
-    * `title` string - The title for the PDF header.
-    * `url` string - the url for the PDF footer.
-  * `landscape` boolean (optional) - `true` for landscape, `false` for portrait.
-  * `marginsType` Integer (optional) - Specifies the type of margins to use. Uses 0 for
-    default margin, 1 for no margin, and 2 for minimum margin.
-    and `width` in microns.
-  * `scaleFactor` number (optional) - The scale factor of the web page. Can range from 0 to 100.
-  * `pageRanges` Record<string, number> (optional) - The page range to print. On macOS, only the first range is honored.
-    * `from` number - Index of the first page to print (0-based).
-    * `to` number - Index of the last page to print (inclusive) (0-based).
-  * `pageSize` string | Size (optional) - Specify page size of the generated PDF. Can be `A3`,
-  `A4`, `A5`, `Legal`, `Letter`, `Tabloid` or an Object containing `height`
-  * `printBackground` boolean (optional) - Whether to print CSS backgrounds.
-  * `printSelectionOnly` boolean (optional) - Whether to print selection only.
+  * `landscape` boolean (optional) - Paper orientation.`true` for landscape, `false` for portrait. Defaults to false.
+  * `displayHeaderFooter` boolean (optional) - Whether to display header and footer. Defaults to false.
+  * `printBackground` boolean (optional) - Whether to print background graphics. Defaults to false.
+  * `scale` number(optional)  - Scale of the webpage rendering. Defaults to 1.
+  * `pageSize` string | Size (optional) - Specify page size of the generated PDF. Can be `A0`, `A1`, `A2`, `A3`,
+  `A4`, `A5`, `A6`, `Legal`, `Letter`, `Tabloid`, `Ledger`, or an Object containing `height` and `width` in inches. Defaults to `Letter`.
+  * `margins` Object (optional)
+    * `top` number (optional) - Top margin in inches. Defaults to 1cm (~0.4 inches).
+    * `bottom` number (optional) - Bottom margin in inches. Defaults to 1cm (~0.4 inches).
+    * `left` number (optional) - Left margin in inches. Defaults to 1cm (~0.4 inches).
+    * `right` number (optional) - Right margin in inches. Defaults to 1cm (~0.4 inches).
+  * `pageRanges` string (optional) - Paper ranges to print, e.g., '1-5, 8, 11-13'. Defaults to the empty string, which means print all pages.
+  * `headerTemplate` string (optional) - HTML template for the print header. Should be valid HTML markup with following classes used to inject printing values into them: `date` (formatted print date), `title` (document title), `url` (document location), `pageNumber` (current page number) and `totalPages` (total pages in the document). For example, `<span class=title></span>` would generate span containing the title.
+  * `footerTemplate` string (optional) - HTML template for the print footer. Should use the same format as the `headerTemplate`.
+  * `preferCSSPageSize` boolean (optional) - Whether or not to prefer page size as defined by css. Defaults to false, in which case the content will be scaled to fit the paper size.
 
 Returns `Promise<Uint8Array>` - Resolves with the generated PDF data.
 

docs/breaking-changes.md

@@ -14,6 +14,61 @@ This document uses the following convention to categorize breaking changes:
 
 ## Planned Breaking API Changes (20.0)
 
+### API Changed: `webContents.printToPDF()`
+
+`webContents.printToPDF()` has been modified to conform to [`Page.printToPDF`](https://chromedevtools.github.io/devtools-protocol/tot/Page/#method-printToPDF) in the Chrome DevTools Protocol. This has been changes in order to
+address changes upstream that made our previous implementation untenable and rife with bugs.
+
+**Arguments Changed**
+
+* `pageRanges`
+
+**Arguments Removed**
+
+* `printSelectionOnly`
+* `marginsType`
+* `headerFooter`
+* `scaleFactor`
+
+**Arguments Added**
+
+* `headerTemplate`
+* `footerTemplate`
+* `displayHeaderFooter`
+* `margins`
+* `scale`
+* `preferCSSPageSize`
+
+```js
+// Main process
+const { webContents } = require('electron')
+
+webContents.printToPDF({
+  landscape: true,
+  displayHeaderFooter: true,
+  printBackground: true,
+  scale: 2,
+  pageSize: 'Ledger',
+  margins: {
+    top: 2,
+    bottom: 2,
+    left: 2,
+    right: 2
+  },
+  pageRanges: '1-5, 8, 11-13',
+  headerTemplate: '<h1>Title</h1>',
+  footerTemplate: '<div><span class="pageNumber"></span></div>',
+  preferCSSPageSize: true
+}).then(data => {
+  fs.writeFile(pdfPath, data, (error) => {
+    if (error) throw error
+    console.log(`Wrote PDF successfully to ${pdfPath}`)
+  })
+}).catch(error => {
+  console.log(`Failed to write PDF to ${pdfPath}: `, error)
+})
+```
+
 ### Default Changed: renderers without `nodeIntegration: true` are sandboxed by default
 
 Previously, renderers that specified a preload script defaulted to being
@@ -34,6 +89,13 @@ window manager. There is not a direct equivalent for Wayland, and the known
 workarounds have unacceptable tradeoffs (e.g. Window.is_skip_taskbar in GNOME
 requires unsafe mode), so Electron is unable to support this feature on Linux.
 
+### API Changed: `session.setDevicePermissionHandler(handler)`
+
+The handler invoked when `session.setDevicePermissionHandler(handler)` is used
+has a change to its arguments.  This handler no longer is passed a frame
+`[WebFrameMain](api/web-frame-main.md)`, but instead is passed the `origin`, which
+is the origin that is checking for device permission.
+
 ## Planned Breaking API Changes (19.0)
 
 None

docs/development/README.md

@@ -64,7 +64,7 @@ If you want to add a new API module to Electron, you'll want to look in [creatin
 
 Electron has a fully-fledged governance system that oversees activity in Electron and whose working groups are responsible for areas like APIs, releases, and upgrades to Electron's dependencies including Chromium and Node.js. Depending on how frequently and to what end you want to contribute, you may want to consider joining a working group.
 
-Details about each group and their reponsibilities can be found in the [governance repo](https://github.com/electron/governance).
+Details about each group and their responsibilities can be found in the [governance repo](https://github.com/electron/governance).
 
 ## Patches in Electron
 

docs/development/debugging.md

@@ -9,7 +9,7 @@ Some of the more common approaches are outlined below.
 
 Chromium contains logging macros which can aid debugging by printing information to console in C++ and Objective-C++.
 
-You might use this to print out variable values, function names, and line numbers, amonst other things.
+You might use this to print out variable values, function names, and line numbers, amongst other things.
 
 Some examples:
 
@@ -25,7 +25,7 @@ See [logging.h](https://chromium.googlesource.com/chromium/src/base/+/refs/heads
 
 ## Printing Stacktraces
 
-Chromium contains a helper to print stack traces to console without interrrupting the program.
+Chromium contains a helper to print stack traces to console without interrupting the program.
 
 ```cpp
 #include "base/debug/stack_trace.h"

docs/fiddles/tutorial-first-app/index.html

@@ -0,0 +1,21 @@
+<!DOCTYPE html>
+<html>
+  <head>
+    <meta charset="UTF-8" />
+    <meta
+      http-equiv="Content-Security-Policy"
+      content="default-src 'self'; script-src 'self'"
+    />
+    <meta
+      http-equiv="X-Content-Security-Policy"
+      content="default-src 'self'; script-src 'self'"
+    />
+    <title>Hello from Electron renderer!</title>
+  </head>
+  <body>
+    <h1>Hello from Electron renderer!</h1>
+    <p>👋</p>
+    <p id="info"></p>
+  </body>
+  <script src="./renderer.js"></script>
+</html>

docs/fiddles/tutorial-first-app/main.js

@@ -0,0 +1,26 @@
+const { app, BrowserWindow } = require('electron');
+
+const createWindow = () => {
+  const win = new BrowserWindow({
+    width: 800,
+    height: 600,
+  });
+
+  win.loadFile('index.html');
+};
+
+app.whenReady().then(() => {
+  createWindow();
+
+  app.on('activate', () => {
+    if (BrowserWindow.getAllWindows().length === 0) {
+      createWindow();
+    }
+  });
+});
+
+app.on('window-all-closed', () => {
+  if (process.platform !== 'darwin') {
+    app.quit();
+  }
+});

docs/fiddles/tutorial-preload/index.html

@@ -0,0 +1,21 @@
+<!DOCTYPE html>
+<html>
+  <head>
+    <meta charset="UTF-8" />
+    <meta
+      http-equiv="Content-Security-Policy"
+      content="default-src 'self'; script-src 'self'"
+    />
+    <meta
+      http-equiv="X-Content-Security-Policy"
+      content="default-src 'self'; script-src 'self'"
+    />
+    <title>Hello from Electron renderer!</title>
+  </head>
+  <body>
+    <h1>Hello from Electron renderer!</h1>
+    <p>👋</p>
+    <p id="info"></p>
+  </body>
+  <script src="./renderer.js"></script>
+</html>

docs/fiddles/tutorial-preload/main.js

@@ -0,0 +1,30 @@
+const { app, BrowserWindow } = require('electron');
+const path = require('path');
+
+const createWindow = () => {
+  const win = new BrowserWindow({
+    width: 800,
+    height: 600,
+    webPreferences: {
+      preload: path.join(__dirname, 'preload.js'),
+    },
+  });
+
+  win.loadFile('index.html');
+};
+
+app.whenReady().then(() => {
+  createWindow();
+
+  app.on('activate', () => {
+    if (BrowserWindow.getAllWindows().length === 0) {
+      createWindow();
+    }
+  });
+});
+
+app.on('window-all-closed', () => {
+  if (process.platform !== 'darwin') {
+    app.quit();
+  }
+});

docs/fiddles/tutorial-preload/preload.js

@@ -0,0 +1,7 @@
+const { contextBridge } = require('electron');
+
+contextBridge.exposeInMainWorld('versions', {
+  node: () => process.versions.node,
+  chrome: () => process.versions.chrome,
+  electron: () => process.versions.electron,
+});

docs/fiddles/tutorial-preload/renderer.js

@@ -0,0 +1,2 @@
+const information = document.getElementById('info');
+information.innerText = `This app is using Chrome (v${versions.chrome()}), Node.js (v${versions.node()}), and Electron (v${versions.electron()})`;

docs/tutorial/application-distribution.md

@@ -1,26 +1,26 @@
-# Application Distribution
+---
+title: 'Application Packaging'
+description: 'To distribute your app with Electron, you need to package and rebrand it. To do this, you can either use specialized tooling or manual approaches.'
+slug: application-distribution
+hide_title: false
+---
 
-## Overview
-
-To distribute your app with Electron, you need to package and rebrand it.
-To do this, you can either use specialized tooling or manual approaches.
+To distribute your app with Electron, you need to package and rebrand it. To do this, you
+can either use specialized tooling or manual approaches.
 
 ## With tooling
 
-You can use the following tools to distribute your application:
+There are a couple tools out there that exist to package and distribute your Electron app.
+We recommend using [Electron Forge](https://www.electronforge.io). You can check out
+its documentation directly, or refer to the [Packaging and Distribution](./tutorial-5-packaging.md)
+part of the Electron tutorial.
 
-* [electron-forge](https://github.com/electron-userland/electron-forge)
-* [electron-builder](https://github.com/electron-userland/electron-builder)
-* [electron-packager](https://github.com/electron/electron-packager)
+## Manual packaging
 
-These tools will take care of all the steps you need to take to end up with a
-distributable Electron application, such as bundling your application,
-rebranding the executable, and setting the right icons.
+If you prefer the manual approach, there are 2 ways to distribute your application:
 
-You can check the example of how to package your app with `electron-forge` in
-the [Quick Start guide](quick-start.md#package-and-distribute-your-application).
-
-## Manual distribution
+- With prebuilt binaries
+- With an app source code archive
 
 ### With prebuilt binaries
 
@@ -29,21 +29,19 @@ binaries](https://github.com/electron/electron/releases). Next, the folder
 containing your app should be named `app` and placed in Electron's resources
 directory as shown in the following examples.
 
-> *NOTE:* the location of Electron's prebuilt binaries is indicated
+:::note
+The location of Electron's prebuilt binaries is indicated
 with `electron/` in the examples below.
+:::
 
-*On macOS:*
-
-```plaintext
+```plain title='macOS'
 electron/Electron.app/Contents/Resources/app/
 ├── package.json
 ├── main.js
 └── index.html
 ```
 
-*On Windows and Linux:*
-
-```plaintext
+```plain title='Windows and Linux'
 electron/resources/app
 ├── package.json
 ├── main.js
@@ -54,7 +52,7 @@ Then execute `Electron.app` on macOS, `electron` on Linux, or `electron.exe`
 on Windows, and Electron will start as your app. The `electron` directory
 will then be your distribution to deliver to users.
 
-### With an app source code archive
+### With an app source code archive (asar)
 
 Instead of shipping your app by copying all of its source files, you can
 package your app into an [asar] archive to improve the performance of reading
@@ -65,16 +63,12 @@ To use an `asar` archive to replace the `app` folder, you need to rename the
 archive to `app.asar`, and put it under Electron's resources directory like
 below, and Electron will then try to read the archive and start from it.
 
-*On macOS:*
-
-```plaintext
+```plain title='macOS'
 electron/Electron.app/Contents/Resources/
 └── app.asar
 ```
 
-*On Windows and Linux:*
-
-```plaintext
+```plain title='Windows'
 electron/resources/
 └── app.asar
 ```
@@ -87,47 +81,44 @@ You can find more details on how to use `asar` in the
 After bundling your app into Electron, you will want to rebrand Electron
 before distributing it to users.
 
-#### macOS
+- **Windows:** You can rename `electron.exe` to any name you like, and edit
+  its icon and other information with tools like [rcedit](https://github.com/electron/rcedit).
+- **Linux:** You can rename the `electron` executable to any name you like.
+- **macOS:** You can rename `Electron.app` to any name you want, and you also have to rename
+  the `CFBundleDisplayName`, `CFBundleIdentifier` and `CFBundleName` fields in the
+  following files:
 
-You can rename `Electron.app` to any name you want, and you also have to rename
-the `CFBundleDisplayName`, `CFBundleIdentifier` and `CFBundleName` fields in the
-following files:
+  - `Electron.app/Contents/Info.plist`
+  - `Electron.app/Contents/Frameworks/Electron Helper.app/Contents/Info.plist`
 
-* `Electron.app/Contents/Info.plist`
-* `Electron.app/Contents/Frameworks/Electron Helper.app/Contents/Info.plist`
+  You can also rename the helper app to avoid showing `Electron Helper` in the
+  Activity Monitor, but make sure you have renamed the helper app's executable
+  file's name.
 
-You can also rename the helper app to avoid showing `Electron Helper` in the
-Activity Monitor, but make sure you have renamed the helper app's executable
-file's name.
+  The structure of a renamed app would be like:
 
-The structure of a renamed app would be like:
-
-```plaintext
+```plain
 MyApp.app/Contents
 ├── Info.plist
 ├── MacOS/
-│   └── MyApp
+│   └── MyApp
 └── Frameworks/
     └── MyApp Helper.app
         ├── Info.plist
         └── MacOS/
-            └── MyApp Helper
+            └── MyApp Helper
 ```
 
-#### Windows
+:::note
 
-You can rename `electron.exe` to any name you like, and edit its icon and other
-information with tools like [rcedit](https://github.com/electron/rcedit).
-
-#### Linux
-
-You can rename the `electron` executable to any name you like.
-
-### Rebranding by rebuilding Electron from source
-
-It is also possible to rebrand Electron by changing the product name and
+it is also possible to rebrand Electron by changing the product name and
 building it from source. To do this you need to set the build argument
 corresponding to the product name (`electron_product_name = "YourProductName"`)
 in the `args.gn` file and rebuild.
 
+Keep in mind this is not recommended as setting up the environment to compile
+from source is not trivial and takes significant time.
+
+:::
+
 [asar]: https://github.com/electron/asar

docs/tutorial/code-signing.md

@@ -1,14 +1,20 @@
-# Code Signing
+---
+title: 'Code Signing'
+description: 'Code signing is a security technology that you use to certify that an app was created by you.'
+slug: code-signing
+hide_title: false
+---
 
 Code signing is a security technology that you use to certify that an app was
-created by you.
+created by you. You should sign your application so it does not trigger any
+operating system security checks.
 
-On macOS the system can detect any change to the app, whether the change is
+On macOS, the system can detect any change to the app, whether the change is
 introduced accidentally or by malicious code.
 
 On Windows, the system assigns a trust level to your code signing certificate
 which if you don't have, or if your trust level is low, will cause security
-dialogs to appear when users start using your application.  Trust level builds
+dialogs to appear when users start using your application. Trust level builds
 over time so it's better to start code signing as early as possible.
 
 While it is possible to distribute unsigned apps, it is not recommended. Both
@@ -16,20 +22,19 @@ Windows and macOS will, by default, prevent either the download or the execution
 of unsigned applications. Starting with macOS Catalina (version 10.15), users
 have to go through multiple manual steps to open unsigned applications.
 
-![macOS Catalina Gatekeeper warning: The app cannot be opened because the
-developer cannot be verified](../images/gatekeeper.png)
+![macOS Catalina Gatekeeper warning: The app cannot be opened because the developer cannot be verified](../images/gatekeeper.png)
 
 As you can see, users get two options: Move the app straight to the trash or
 cancel running it. You don't want your users to see that dialog.
 
 If you are building an Electron app that you intend to package and distribute,
-it should be code-signed.
+it should be code signed.
 
-# Signing & notarizing macOS builds
+## Signing & notarizing macOS builds
 
-Properly preparing macOS applications for release requires two steps: First, the
-app needs to be code-signed. Then, the app needs to be uploaded to Apple for a
-process called "notarization", where automated systems will further verify that
+Properly preparing macOS applications for release requires two steps. First, the
+app needs to be code signed. Then, the app needs to be uploaded to Apple for a
+process called **notarization**, where automated systems will further verify that
 your app isn't doing anything to endanger its users.
 
 To start the process, ensure that you fulfill the requirements for signing and
@@ -42,18 +47,18 @@ notarizing your app:
 Electron's ecosystem favors configuration and freedom, so there are multiple
 ways to get your application signed and notarized.
 
-## `electron-forge`
+### Using Electron Forge
 
 If you're using Electron's favorite build tool, getting your application signed
 and notarized requires a few additions to your configuration. [Forge](https://electronforge.io) is a
 collection of the official Electron tools, using [`electron-packager`],
 [`electron-osx-sign`], and [`electron-notarize`] under the hood.
 
-Let's take a look at an example configuration with all required fields. Not all
-of them are required: the tools will be clever enough to automatically find a
-suitable `identity`, for instance, but we recommend that you are explicit.
+Let's take a look at an example `package.json` configuration with all required fields. Not all of them are
+required: the tools will be clever enough to automatically find a suitable `identity`, for instance,
+but we recommend that you are explicit.
 
-```json
+```json title="package.json" {7}
 {
   "name": "my-app",
   "version": "0.0.1",
@@ -69,7 +74,7 @@ suitable `identity`, for instance, but we recommend that you are explicit.
         },
         "osxNotarize": {
           "appleId": "felix@felix.fun",
-          "appleIdPassword": "my-apple-id-password",
+          "appleIdPassword": "my-apple-id-password"
         }
       }
     }
@@ -77,11 +82,11 @@ suitable `identity`, for instance, but we recommend that you are explicit.
 }
 ```
 
-The `plist` file referenced here needs the following macOS-specific entitlements
+The `entitlements.plist` file referenced here needs the following macOS-specific entitlements
 to assure the Apple security mechanisms that your app is doing these things
 without meaning any harm:
 
-```xml
+```xml title="entitlements.plist"
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
@@ -104,7 +109,7 @@ file](https://github.com/electron/fiddle/blob/master/forge.config.js).
 If you plan to access the microphone or camera within your app using Electron's APIs, you'll also
 need to add the following entitlements:
 
-```xml
+```xml title="entitlements.plist"
 <key>com.apple.security.device.audio-input</key>
 <true/>
 <key>com.apple.security.device.camera</key>
@@ -113,28 +118,26 @@ need to add the following entitlements:
 
 If these are not present in your app's entitlements when you invoke, for example:
 
-```js
+```js title="main.js"
 const { systemPreferences } = require('electron')
-
 const microphone = systemPreferences.askForMediaAccess('microphone')
 ```
 
 Your app may crash. See the Resource Access section in [Hardened Runtime](https://developer.apple.com/documentation/security/hardened_runtime) for more information and entitlements you may need.
 
-## `electron-builder`
+### Using Electron Builder
 
 Electron Builder comes with a custom solution for signing your application. You
 can find [its documentation here](https://www.electron.build/code-signing).
 
-## `electron-packager`
+### Using Electron Packager
 
 If you're not using an integrated build pipeline like Forge or Builder, you
 are likely using [`electron-packager`], which includes [`electron-osx-sign`] and
 [`electron-notarize`].
 
 If you're using Packager's API, you can pass [in configuration that both signs
-and notarizes your
-application](https://electron.github.io/electron-packager/main/interfaces/electronpackager.options.html).
+and notarizes your application](https://electron.github.io/electron-packager/main/interfaces/electronpackager.options.html).
 
 ```js
 const packager = require('electron-packager')
@@ -155,11 +158,11 @@ packager({
 })
 ```
 
-The `plist` file referenced here needs the following macOS-specific entitlements
+The `entitlements.plist` file referenced here needs the following macOS-specific entitlements
 to assure the Apple security mechanisms that your app is doing these things
 without meaning any harm:
 
-```xml
+```xml title="entitlements.plist"
 <?xml version="1.0" encoding="UTF-8"?>
 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
 <plist version="1.0">
@@ -175,11 +178,11 @@ without meaning any harm:
 Up until Electron 12, the `com.apple.security.cs.allow-unsigned-executable-memory` entitlement was required
 as well. However, it should not be used anymore if it can be avoided.
 
-## Mac App Store
+### Signing Mac App Store applications
 
 See the [Mac App Store Guide].
 
-# Signing Windows builds
+## Signing Windows builds
 
 Before signing Windows builds, you must do the following:
 
@@ -190,31 +193,140 @@ Before signing Windows builds, you must do the following:
 You can get a code signing certificate from a lot of resellers. Prices vary, so
 it may be worth your time to shop around. Popular resellers include:
 
-* [digicert](https://www.digicert.com/code-signing/microsoft-authenticode.htm)
-* [Sectigo](https://sectigo.com/ssl-certificates-tls/code-signing)
-* Amongst others, please shop around to find one that suits your needs, Google
-  is your friend 😄
+- [digicert](https://www.digicert.com/code-signing/microsoft-authenticode.htm)
+- [Sectigo](https://sectigo.com/ssl-certificates-tls/code-signing)
+- Amongst others, please shop around to find one that suits your needs! 😄
 
-There are a number of tools for signing your packaged app:
+:::caution Keep your certificate password private
+Your certificate password should be a **secret**. Do not share it publicly or
+commit it to your source code.
+:::
 
-* [`electron-winstaller`] will generate an installer for windows and sign it for
-  you
-* [`electron-forge`] can sign installers it generates through the
-  Squirrel.Windows or MSI targets.
-* [`electron-builder`] can sign some of its windows targets
+### Using Electron Forge
 
-## Windows Store
+Once you have a code signing certificate file (`.pfx`), you can sign
+[Squirrel.Windows][maker-squirrel] and [MSI][maker-msi] installers in Electron Forge
+with the `certificateFile` and `certificatePassword` fields in their respective
+configuration objects.
+
+For example, if you keep your Forge config in your `package.json` file and are
+creating a Squirrel.Windows installer:
+
+```json {9-15} title='package.json'
+{
+  "name": "my-app",
+  "version": "0.0.1",
+  //...
+  "config": {
+    "forge": {
+      "packagerConfig": {},
+      "makers": [
+        {
+          "name": "@electron-forge/maker-squirrel",
+          "config": {
+            "certificateFile": "./cert.pfx",
+            "certificatePassword": "this-is-a-secret"
+          }
+        }
+      ]
+    }
+  }
+  //...
+}
+```
+
+### Using electron-winstaller (Squirrel.Windows)
+
+[`electron-winstaller`] is a package that can generate Squirrel.Windows installers for your
+Electron app. This is the tool used under the hood by Electron Forge's
+[Squirrel.Windows Maker][maker-squirrel]. If you're not using Electron Forge and want to use
+`electron-winstaller` directly, use the `certificateFile` and `certificatePassword` configuration
+options when creating your installer.
+
+```js {10-11}
+const electronInstaller = require('electron-winstaller')
+// NB: Use this syntax within an async function, Node does not have support for
+//     top-level await as of Node 12.
+try {
+  await electronInstaller.createWindowsInstaller({
+    appDirectory: '/tmp/build/my-app-64',
+    outputDirectory: '/tmp/build/installer64',
+    authors: 'My App Inc.',
+    exe: 'myapp.exe',
+    certificateFile: './cert.pfx',
+    certificatePassword: 'this-is-a-secret',
+  })
+  console.log('It worked!')
+} catch (e) {
+  console.log(`No dice: ${e.message}`)
+}
+```
+
+For full configuration options, check out the [`electron-winstaller`] repository!
+
+### Using electron-wix-msi (WiX MSI)
+
+[`electron-wix-msi`] is a package that can generate MSI installers for your
+Electron app. This is the tool used under the hood by Electron Forge's [MSI Maker][maker-msi].
+
+If you're not using Electron Forge and want to use `electron-wix-msi` directly, use the
+`certificateFile` and `certificatePassword` configuration options
+or pass in parameters directly to [SignTool.exe] with the `signWithParams` option.
+
+```js {12-13}
+import { MSICreator } from 'electron-wix-msi'
+
+// Step 1: Instantiate the MSICreator
+const msiCreator = new MSICreator({
+  appDirectory: '/path/to/built/app',
+  description: 'My amazing Kitten simulator',
+  exe: 'kittens',
+  name: 'Kittens',
+  manufacturer: 'Kitten Technologies',
+  version: '1.1.2',
+  outputDirectory: '/path/to/output/folder',
+  certificateFile: './cert.pfx',
+  certificatePassword: 'this-is-a-secret',
+})
+
+// Step 2: Create a .wxs template file
+const supportBinaries = await msiCreator.create()
+
+// 🆕 Step 2a: optionally sign support binaries if you
+// sign you binaries as part of of your packaging script
+supportBinaries.forEach(async (binary) => {
+  // Binaries are the new stub executable and optionally
+  // the Squirrel auto updater.
+  await signFile(binary)
+})
+
+// Step 3: Compile the template to a .msi file
+await msiCreator.compile()
+```
+
+For full configuration options, check out the [`electron-wix-msi`] repository!
+
+### Using Electron Builder
+
+Electron Builder comes with a custom solution for signing your application. You
+can find [its documentation here](https://www.electron.build/code-signing).
+
+### Signing Windows Store applications
 
 See the [Windows Store Guide].
 
-[Apple Developer Program]: https://developer.apple.com/programs/
+[apple developer program]: https://developer.apple.com/programs/
 [`electron-builder`]: https://github.com/electron-userland/electron-builder
 [`electron-forge`]: https://github.com/electron-userland/electron-forge
 [`electron-osx-sign`]: https://github.com/electron-userland/electron-osx-sign
 [`electron-packager`]: https://github.com/electron/electron-packager
 [`electron-notarize`]: https://github.com/electron/electron-notarize
 [`electron-winstaller`]: https://github.com/electron/windows-installer
-[Xcode]: https://developer.apple.com/xcode
+[`electron-wix-msi`]: https://github.com/felixrieseberg/electron-wix-msi
+[xcode]: https://developer.apple.com/xcode
 [signing certificates]: https://github.com/electron/electron-osx-sign/wiki/1.-Getting-Started#certificates
-[Mac App Store Guide]: mac-app-store-submission-guide.md
-[Windows Store Guide]: windows-store-guide.md
+[mac app store guide]: ./mac-app-store-submission-guide.md
+[windows store guide]: ./windows-store-guide.md
+[maker-squirrel]: https://www.electronforge.io/config/makers/squirrel.windows
+[maker-msi]: https://www.electronforge.io/config/makers/wix-msi
+[signtool.exe]: https://docs.microsoft.com/en-us/dotnet/framework/tools/signtool-exe

docs/tutorial/devices.md

@@ -43,7 +43,7 @@ the WebHID API:
 * [`ses.setDevicePermissionHandler(handler)`](../api/session.md#sessetdevicepermissionhandlerhandler)
   can be used to provide default permissioning to devices without first calling
   for permission to devices via `navigator.hid.requestDevice`.  Additionally,
-  the default behavior of Electron is to store granted device permision through
+  the default behavior of Electron is to store granted device permission through
   the lifetime of the corresponding WebContents.  If longer term storage is
   needed, a developer can store granted device permissions (eg when handling
   the `select-hid-device` event) and then read from that storage with
@@ -92,7 +92,7 @@ There are several additional APIs for working with the Web Serial API:
 * [`ses.setDevicePermissionHandler(handler)`](../api/session.md#sessetdevicepermissionhandlerhandler)
   can be used to provide default permissioning to devices without first calling
   for permission to devices via `navigator.serial.requestPort`.  Additionally,
-  the default behavior of Electron is to store granted device permision through
+  the default behavior of Electron is to store granted device permission through
   the lifetime of the corresponding WebContents.  If longer term storage is
   needed, a developer can store granted device permissions (eg when handling
   the `select-serial-port` event) and then read from that storage with

docs/tutorial/distribution-overview.md

@@ -0,0 +1,54 @@
+---
+title: 'Distribution Overview'
+description: 'To distribute your app with Electron, you need to package and rebrand it. To do this, you can either use specialized tooling or manual approaches.'
+slug: distribution-overview
+hide_title: false
+---
+
+Once your app is ready for production, there are a couple steps you need to take before
+you can deliver it to your users.
+
+## Packaging
+
+To distribute your app with Electron, you need to package all your resources and assets
+into an executable and rebrand it. To do this, you can either use specialized tooling
+or do it manually. See the [Application Packaging][application-packaging] tutorial
+for more information.
+
+## Code signing
+
+Code signing is a security technology that you use to certify that an app was
+created by you. You should sign your application so it does not trigger the
+security checks of your user's operating system.
+
+To get started with each operating system's code signing process, please read the
+[Code Signing][code-signing] docs.
+
+## Publishing
+
+Once your app is packaged and signed, you can freely distribute your app directly
+to users by uploading your installers online.
+
+To reach more users, you can also choose to upload your app to each operating system's
+digital distribution platform (i.e. app store). These require another build step aside
+from your direct download app. For more information, check out each individual app store guide:
+
+- [Mac App Store][mac-app]
+- [Windows Store][windows-store]
+- [Snapcraft (Linux)][snapcraft]
+
+## Updating
+
+Electron's auto-updater allows you to deliver application updates to users
+without forcing them to manually download new versions of your application.
+Check out the [Updating Applications][updates] guide for details on implementing automatic updates
+with Electron.
+
+<!-- Link labels -->
+
+[application-packaging]: ./application-distribution.md
+[code-signing]: ./code-signing.md
+[mac-app]: ./mac-app-store-submission-guide.md
+[windows-store]: ./windows-store-guide.md
+[snapcraft]: ./snapcraft.md
+[updates]: ./updates.md

docs/tutorial/electron-versioning.md

@@ -18,7 +18,7 @@ npm install --save-dev electron@latest
 
 There are several major changes from our 1.x strategy outlined below. Each change is intended to satisfy the needs and priorities of developers/maintainers and app developers.
 
-1. Strict use of the the [SemVer](#semver) spec
+1. Strict use of the [SemVer](#semver) spec
 2. Introduction of semver-compliant `-beta` tags
 3. Introduction of [conventional commit messages](https://conventionalcommits.org/)
 4. Well-defined stabilization branches

docs/tutorial/examples.md

@@ -0,0 +1,56 @@
+---
+title: 'Examples Overview'
+description: 'A set of examples for common Electron features'
+slug: examples
+hide_title: false
+---
+
+# Examples Overview
+
+In this section, we have collected a set of guides for common features
+that you may want to implement in your Electron application. Each guide
+contains a practical example in a minimal, self-contained example app.
+The easiest way to run these examples is by downloading [Electron Fiddle][fiddle].
+
+Once Fiddle is installed, you can press on the "Open in Fiddle" button that you
+will find below code samples like the following one:
+
+```fiddle docs/fiddles/quick-start
+window.addEventListener('DOMContentLoaded', () => {
+  const replaceText = (selector, text) => {
+    const element = document.getElementById(selector)
+    if (element) element.innerText = text
+  }
+
+  for (const type of ['chrome', 'node', 'electron']) {
+    replaceText(`${type}-version`, process.versions[type])
+  }
+})
+```
+
+If there is still something that you do not know how to do, please take a look at the [API][app]
+as there is a chance it might be documented just there (and also open an issue requesting the
+guide!).
+
+<!-- guide-table-start -->
+
+| Guide                 | Description                                                                                                         |
+| :-------------------- | ------------------------------------------------------------------------------------------------------------------- |
+| [Message ports]       | This guide provides some examples of how you might use MessagePorts in your app to communicate different processes. |
+| [Device access]       | Learn how to access the device hardware (Bluetooth, USB, Serial).                                                   |
+| [Keyboard shortcuts]  | Configure local and global keyboard shortcuts for your Electron application.                                        |
+| [Multithreading]      | With Web Workers, it is possible to run JavaScript in OS-level threads                                              |
+| [Offscreen rendering] | Offscreen rendering lets you obtain the content of a BrowserWindow in a bitmap, so it can be rendered anywhere.     |
+| [Spellchecker]        | Learn how to use the built-in spellchecker, set languages, etc.                                                     |
+| [Web embeds]          | Discover the different ways to embed third-party web content in your application.                                   |
+
+<!-- guide-table-end -->
+
+## How to...?
+
+You can find the full list of "How to?" in the sidebar. If there is
+something that you would like to do that is not documented, please join
+our [Discord server][] and let us know!
+
+[discord server]: https://discord.com/invite/electron
+[fiddle]: https://www.electronjs.org/fiddle

docs/tutorial/introduction.md

@@ -1,10 +1,11 @@
-# Introduction
+---
+title: 'Introduction'
+description: 'Welcome to the Electron documentation! If this is your first time developing an Electron app, read through this Getting Started section to get familiar with the basics. Otherwise, feel free to explore our guides and API documentation!'
+slug: /latest/
+hide_title: false
+---
 
-Welcome to the Electron documentation! If this is your first time developing
-an Electron app, read through this Getting Started section to get familiar with the
-basics. Otherwise, feel free to explore our guides and API documentation!
-
-## What is Electron?
+# What is Electron?
 
 Electron is a framework for building desktop applications using JavaScript,
 HTML, and CSS. By embedding [Chromium][chromium] and [Node.js][node] into its
@@ -12,20 +13,12 @@ binary, Electron allows you to maintain one JavaScript codebase and create
 cross-platform apps that work on Windows, macOS, and Linux — no native development
 experience required.
 
-## Prerequisites
+## Getting started
 
-These docs operate under the assumption that the reader is familiar with both
-Node.js and general web development. If you need to get more comfortable with
-either of these areas, we recommend the following resources:
-
-* [Getting started with the Web (MDN)][mdn-guide]
-* [Introduction to Node.js][node-guide]
-
-Moreover, you'll have a better time understanding how Electron works if you get
-acquainted with Chromium's process model. You can get a brief overview of
-Chrome architecture with the [Chrome comic][comic], which was released alongside
-Chrome's launch back in 2008. Although it's been over a decade since then, the
-core principles introduced in the comic remain helpful to understand Electron.
+We recommend you to start with the [tutorial], which guides you through the
+process of developing an Electron app and distributing it to users.
+The [examples] and [API documentation] are also good places to browse around
+and discover new things.
 
 ## Running examples with Electron Fiddle
 
@@ -39,21 +32,44 @@ a code block. If you have Fiddle installed, this button will open a
 `fiddle.electronjs.org` link that will automatically load the example into Fiddle,
 no copy-pasting required.
 
+```fiddle docs/fiddles/quick-start
+```
+
+## What is in the docs?
+
+All the official documentation is available from the sidebar. These
+are the different categories and what you can expect on each one:
+
+- **Tutorial**: An end-to-end guide on how to create and publish your first Electron
+  application.
+- **Processes in Electron**: In-depth reference on Electron processes and how to work with them.
+- **Best Practices**: Important checklists to keep in mind when developing an Electron app.
+- **How-To Examples**: Quick references to add features to your Electron app.
+- **Development**: Miscellaneous development guides.
+- **Distribution**: Learn how to distribute your app to end users.
+- **Testing and debugging**: How to debug JavaScript, write tests, and other tools used
+  to create quality Electron applications.
+- **Resources**: Useful links to better understand how the Electron project works
+  and is organized.
+- **Contributing to Electron**: Compiling Electron and making contributions can be daunting.
+  We try to make it easier in this section.
+
 ## Getting help
 
 Are you getting stuck anywhere? Here are a few links to places to look:
 
-* If you need help with developing your app, our [community Discord server][discord]
-is a great place to get advice from other Electron app developers.
-* If you suspect you're running into a bug with the `electron` package, please check
-the [GitHub issue tracker][issue-tracker] to see if any existing issues match your
-problem. If not, feel free to fill out our bug report template and submit a new issue.
+- If you need help with developing your app, our [community Discord server][discord]
+  is a great place to get advice from other Electron app developers.
+- If you suspect you're running into a bug with the `electron` package, please check
+  the [GitHub issue tracker][issue-tracker] to see if any existing issues match your
+  problem. If not, feel free to fill out our bug report template and submit a new issue.
 
+<!-- Links -->
+
+[api documentation]: ../api/app.md
 [chromium]: https://www.chromium.org/
-[node]: https://nodejs.org/
-[mdn-guide]: https://developer.mozilla.org/en-US/docs/Learn/Getting_started_with_the_web
-[node-guide]: https://nodejs.dev/learn
-[comic]: https://www.google.com/googlebooks/chrome/
+[discord]: https://discord.com/invite/APGC3k5yaH
+[examples]: examples.md
 [fiddle]: https://electronjs.org/fiddle
 [issue-tracker]: https://github.com/electron/electron/issues
-[discord]: https://discord.gg/electronjs
+[node]: https://nodejs.org/

docs/tutorial/process-model.md

@@ -1,10 +1,17 @@
+---
+title: 'Process Model'
+description: 'Electron inherits its multi-process architecture from Chromium, which makes the framework architecturally very similar to a modern web browser. This guide will expand on the concepts applied in the tutorial.'
+slug: process-model
+hide_title: false
+---
+
 # Process Model
 
 Electron inherits its multi-process architecture from Chromium, which makes the framework
-architecturally very similar to a modern web browser. In this guide, we'll expound on
-the conceptual knowledge of Electron that we applied in the minimal [quick start app][].
+architecturally very similar to a modern web browser. This guide will expand on the
+concepts applied in the [Tutorial][tutorial].
 
-[quick start app]: ./quick-start.md
+[tutorial]: ./tutorial-1-prerequisites.md
 
 ## Why not a single process?
 
@@ -27,10 +34,10 @@ visualizes this model:
 ![Chrome's multi-process architecture](../images/chrome-processes.png)
 
 Electron applications are structured very similarly. As an app developer, you control
-two types of processes: main and renderer. These are analogous to Chrome's own browser
-and renderer processes outlined above.
+two types of processes: [main](#the-main-process) and [renderer](#the-renderer-process).
+These are analogous to Chrome's own browser and renderer processes outlined above.
 
-[Chrome Comic]: https://www.google.com/googlebooks/chrome/
+[chrome comic]: https://www.google.com/googlebooks/chrome/
 
 ## The main process
 
@@ -40,7 +47,7 @@ to `require` modules and use all of Node.js APIs.
 
 ### Window management
 
-The primary purpose of the main process is to create and manage application windows with the
+The main process' primary purpose is to create and manage application windows with the
 [`BrowserWindow`][browser-window] module.
 
 Each instance of the `BrowserWindow` class creates an application window that loads
@@ -68,7 +75,7 @@ When a `BrowserWindow` instance is destroyed, its corresponding renderer process
 terminated as well.
 
 [browser-window]: ../api/browser-window.md
-[web-embed]: ./web-embeds.md
+[web-embed]: ../tutorial/web-embeds.md
 [web-contents]: ../api/web-contents.md
 [event-emitter]: https://nodejs.org/api/events.html#events_class_eventemitter
 
@@ -90,7 +97,7 @@ app.on('window-all-closed', () => {
 ```
 
 [app]: ../api/app.md
-[quick-start-lifecycle]: ./quick-start.md#manage-your-windows-lifecycle
+[quick-start-lifecycle]: ../tutorial/quick-start.md#manage-your-windows-lifecycle
 
 ### Native APIs
 
@@ -105,7 +112,7 @@ For a full list of Electron's main process modules, check out our API documentat
 
 Each Electron app spawns a separate renderer process for each open `BrowserWindow`
 (and each web embed). As its name implies, a renderer is responsible for
-*rendering* web content. For all intents and purposes, code ran in renderer processes
+_rendering_ web content. For all intents and purposes, code ran in renderer processes
 should behave according to web standards (insofar as Chromium does, at least).
 
 Therefore, all user interfaces and app functionality within a single browser
@@ -115,18 +122,22 @@ web.
 Although explaining every web spec is out of scope for this guide, the bare minimum
 to understand is:
 
-* An HTML file is your entry point for the renderer process.
-* UI styling is added through Cascading Style Sheets (CSS).
-* Executable JavaScript code can be added through `<script>` elements.
+- An HTML file is your entry point for the renderer process.
+- UI styling is added through Cascading Style Sheets (CSS).
+- Executable JavaScript code can be added through `<script>` elements.
 
 Moreover, this also means that the renderer has no direct access to `require`
 or other Node.js APIs. In order to directly include NPM modules in the renderer,
 you must use the same bundler toolchains (for example, `webpack` or `parcel`) that you
 use on the web.
 
-> Note: Renderer processes can be spawned with a full Node.js environment for ease of
-> development. Historically, this used to be the default, but this feature was disabled
-> for security reasons.
+:::warning
+
+Renderer processes can be spawned with a full Node.js environment for ease of
+development. Historically, this used to be the default, but this feature was disabled
+for security reasons.
+
+:::
 
 At this point, you might be wondering how your renderer process user interfaces
 can interact with Node.js and Electron's native desktop functionality if these
@@ -135,8 +146,9 @@ way to import Electron's content scripts.
 
 ## Preload scripts
 
-<!-- Note: This guide doesn't take sandboxing into account, which might fundamentally 
+<!-- Note: This guide doesn't take sandboxing into account, which might fundamentally
 change the statements here. -->
+
 Preload scripts contain code that executes in a renderer process before its web content
 begins loading. These scripts run within the renderer context, but are granted more
 privileges by having access to Node.js APIs.
@@ -149,8 +161,8 @@ const { BrowserWindow } = require('electron')
 //...
 const win = new BrowserWindow({
   webPreferences: {
-    preload: 'path/to/preload.js'
-  }
+    preload: 'path/to/preload.js',
+  },
 })
 //...
 ```
@@ -165,7 +177,7 @@ the [`contextIsolation`][context-isolation] default.
 
 ```js title='preload.js'
 window.myAPI = {
-  desktop: true
+  desktop: true,
 }
 ```
 
@@ -184,7 +196,7 @@ securely:
 const { contextBridge } = require('electron')
 
 contextBridge.exposeInMainWorld('myAPI', {
-  desktop: true
+  desktop: true,
 })
 ```
 
@@ -195,14 +207,15 @@ console.log(window.myAPI)
 
 This feature is incredibly useful for two main purposes:
 
-* By exposing [`ipcRenderer`][ipcRenderer] helpers to the renderer, you can use
+- By exposing [`ipcRenderer`][ipcrenderer] helpers to the renderer, you can use
   inter-process communication (IPC) to trigger main process tasks from the
   renderer (and vice-versa).
-* If you're developing an Electron wrapper for an existing web app hosted on a remote
+- If you're developing an Electron wrapper for an existing web app hosted on a remote
   URL, you can add custom properties onto the renderer's `window` global that can
   be used for desktop-only logic on the web client's side.
 
 [window-mdn]: https://developer.mozilla.org/en-US/docs/Web/API/Window
 [context-isolation]: ./context-isolation.md
 [context-bridge]: ../api/context-bridge.md
-[ipcRenderer]: ../api/ipc-renderer.md
+[ipcrenderer]: ../api/ipc-renderer.md
+[tutorial]: ./tutorial-1-prerequisites.md

docs/tutorial/tutorial-1-prerequisites.md

@@ -0,0 +1,143 @@
+---
+title: 'Prerequisites'
+description: 'This guide will step you through the process of creating a barebones Hello World app in Electron, similar to electron/electron-quick-start.'
+slug: tutorial-prerequisites
+hide_title: false
+---
+
+:::info Follow along the tutorial
+
+This is **part 1** of the Electron tutorial.
+
+1. **[Prerequisites][prerequisites]**
+1. [Building your First App][building your first app]
+1. [Using Preload Scripts][preload]
+1. [Adding Features][features]
+1. [Packaging Your Application][packaging]
+1. [Publishing and Updating][updates]
+
+:::
+
+Electron is a framework for building desktop applications using JavaScript,
+HTML, and CSS. By embedding [Chromium][chromium] and [Node.js][node] into a
+single binary file, Electron allows you to create cross-platform apps that
+work on Windows, macOS, and Linux with a single JavaScript codebase.
+
+This tutorial will guide you through the process of developing a desktop
+application with Electron and distributing it to end users.
+
+## Assumptions
+
+Electron is a native wrapper layer for web apps and is run in a Node.js environment.
+Therefore, this tutorial assumes you are generally familiar with Node and
+front-end web development basics. If you need to do some background reading before
+continuing, we recommend the following resources:
+
+- [Getting started with the Web (MDN Web Docs)][mdn-guide]
+- [Introduction to Node.js][node-guide]
+
+## Required tools
+
+### Code editor
+
+You will need a text editor to write your code. We recommend using [Visual Studio Code],
+although you can choose whichever one you prefer.
+
+### Command line
+
+Throughout the tutorial, we will ask you to use various command-line interfaces (CLIs). You can
+type these commands into your system's default terminal:
+
+- Windows: Command Prompt or PowerShell
+- macOS: Terminal
+- Linux: varies depending on distribution (e.g. GNOME Terminal, Konsole)
+
+Most code editors also come with an integrated terminal, which you can also use.
+
+### Git and GitHub
+
+Git is a commonly-used version control system for source code, and GitHub is a collaborative
+development platform built on top of it. Although neither is strictly necessary to building
+an Electron application, we will use GitHub releases to set up automatic updates later
+on in the tutorial. Therefore, we'll require you to:
+
+- [Create a GitHub account](https://github.com/join)
+- [Install Git](https://github.com/git-guides/install-git)
+
+If you're unfamiliar with how Git works, we recommend reading GitHub's [Git guides]. You can also
+use the [GitHub Desktop] app if you prefer using a visual interface over the command line.
+
+We recommend that you create a local Git repository and publish it to GitHub before starting
+the tutorial, and commit your code after every step.
+
+:::info Installing Git via GitHub Desktop
+
+GitHub Desktop will install the latest version of Git on your system if you don't already have
+it installed.
+
+:::
+
+### Node.js and npm
+
+To begin developing an Electron app, you need to install the [Node.js][node-download]
+runtime and its bundled npm package manager onto your system. We recommend that you
+use the latest long-term support (LTS) version.
+
+:::tip
+
+Please install Node.js using pre-built installers for your platform.
+You may encounter incompatibility issues with different development tools otherwise.
+If you are using macOS, we recommend using a package manager like [Homebrew] or
+[nvm] to avoid any directory permission issues.
+
+:::
+
+To check that Node.js was installed correctly, you can use the `-v` flag when
+running the `node` and `npm` commands. These should print out the installed
+versions.
+
+```sh
+$ node -v
+v16.14.2
+$ npm -v
+8.7.0
+```
+
+:::caution
+
+Although you need Node.js installed locally to scaffold an Electron project,
+Electron **does not use your system's Node.js installation to run its code**. Instead, it
+comes bundled with its own Node.js runtime. This means that your end users do not
+need to install Node.js themselves as a prerequisite to running your app.
+
+To check which version of Node.js is running in your app, you can access the global
+[`process.versions`] variable in the main process or preload script. You can also reference
+the list of versions in the [electron/releases] repository.
+
+:::
+
+<!-- Links -->
+
+[chromium]: https://www.chromium.org/
+[electron/releases]: https://github.com/electron/releases/blob/master/readme.md#releases
+[homebrew]: https://brew.sh/
+[mdn-guide]: https://developer.mozilla.org/en-US/docs/Learn/
+[node]: https://nodejs.org/
+[node-guide]: https://nodejs.dev/learn
+[node-download]: https://nodejs.org/en/download/
+[nvm]: https://github.com/nvm-sh/nvm
+[process-model]: ./process-model.md
+[`process.versions`]: https://nodejs.org/api/process.html#processversions
+[github]: https://github.com/
+[git guides]: https://github.com/git-guides/
+[github desktop]: https://desktop.github.com/
+[visual studio code]: https://code.visualstudio.com/
+
+<!-- Tutorial links -->
+
+[prerequisites]: tutorial-1-prerequisites.md
+[building your first app]: tutorial-2-first-app.md
+[preload]: tutorial-3-preload.md
+[features]: tutorial-4-adding-features.md
+[packaging]: tutorial-5-packaging.md
+[updates]: tutorial-6-publishing-updating.md

docs/tutorial/tutorial-2-first-app.md

@@ -0,0 +1,480 @@
+---
+title: 'Building your First App'
+description: 'This guide will step you through the process of creating a barebones Hello World app in Electron, similar to electron/electron-quick-start.'
+slug: tutorial-first-app
+hide_title: false
+---
+
+:::info Follow along the tutorial
+
+This is **part 2** of the Electron tutorial.
+
+1. [Prerequisites][prerequisites]
+1. **[Building your First App][building your first app]**
+1. [Using Preload Scripts][preload]
+1. [Adding Features][features]
+1. [Packaging Your Application][packaging]
+1. [Publishing and Updating][updates]
+
+:::
+
+## Learning goals
+
+In this part of the tutorial, you will learn how to set up your Electron project
+and write a minimal starter application. By the end of this section,
+you should be able to run a working Electron app in development mode from
+your terminal.
+
+## Setting up your project
+
+:::caution Avoid WSL
+
+If you are on a Windows machine, please do not use [Windows Subsystem for Linux][wsl] (WSL)
+when following this tutorial as you will run into issues when trying to execute the
+application.
+
+<!--https://www.electronforge.io/guides/developing-with-wsl-->
+
+:::
+
+### Initializing your npm project
+
+Electron apps are scaffolded using npm, with the package.json file
+as an entry point. Start by creating a folder and initializing an npm package
+within it with `npm init`.
+
+```sh npm2yarn
+mkdir my-electron-app && cd my-electron-app
+npm init
+```
+
+This command will prompt you to configure some fields in your package.json.
+There are a few rules to follow for the purposes of this tutorial:
+
+- _entry point_ should be `main.js` (you will be creating that file soon).
+- _author_, _license_, and _description_ can be any value, but will be necessary for
+  [packaging][packaging] later on.
+
+Then, install Electron into your app's **devDependencies**, which is the list of external
+development-only package dependencies not required in production.
+
+:::info Why is Electron a devDependency?
+
+This may seem counter-intuitive since your production code is running Electron APIs.
+However, packaged apps will come bundled with the Electron binary, eliminating the need to specify
+it as a production dependency.
+
+:::
+
+```sh npm2yarn
+npm install electron --save-dev
+```
+
+Your package.json file should look something like this after initializing your package
+and installing Electron. You should also now have a `node_modules` folder containing
+the Electron executable, as well as a `package-lock.json` lockfile that specifies
+the exact dependency versions to install.
+
+```json title='package.json'
+{
+  "name": "my-electron-app",
+  "version": "1.0.0",
+  "description": "Hello World!",
+  "main": "main.js",
+  "author": "Jane Doe",
+  "license": "MIT",
+  "devDependencies": {
+    "electron": "19.0.0"
+  }
+}
+```
+
+:::info Advanced Electron installation steps
+
+If installing Electron directly fails, please refer to our [Advanced Installation][installation]
+documentation for instructions on download mirrors, proxies, and troubleshooting steps.
+
+:::
+
+### Adding a .gitignore
+
+The [`.gitignore`][gitignore] file specifies which files and directories to avoid tracking
+with Git. You should place a copy of [GitHub's Node.js gitignore template][gitignore-template]
+into your project's root folder to avoid committing your project's `node_modules` folder.
+
+## Running an Electron app
+
+:::tip Further reading
+
+Read [Electron's process model][process-model] documentation to better
+understand how Electron's multiple processes work together.
+
+:::
+
+The [`main`][package-json-main] script you defined in package.json is the entry point of any
+Electron application. This script controls the **main process**, which runs in a Node.js
+environment and is responsible for controlling your app's lifecycle, displaying native
+interfaces, performing privileged operations, and managing renderer processes
+(more on that later).
+
+Before creating your first Electron app, you will first use a trivial script to ensure your
+main process entry point is configured correctly. Create a `main.js` file in the root folder
+of your project with a single line of code:
+
+```js title='main.js'
+console.log(`Hello from Electron 👋`)
+```
+
+Because Electron's main process is a Node.js runtime, you can execute arbitrary Node.js code
+with the `electron` command (you can even use it as a [REPL]). To execute this script,
+add `electron .` to the `start` command in the [`scripts`][package-scripts]
+field of your package.json. This command will tell the Electron executable to look for the main
+script in the current directory and run it in dev mode.
+
+```json {8-10} title='package.json'
+{
+  "name": "my-electron-app",
+  "version": "1.0.0",
+  "description": "Hello World!",
+  "main": "main.js",
+  "author": "Jane Doe",
+  "license": "MIT",
+  "scripts": {
+    "start": "electron ."
+  },
+  "devDependencies": {
+    "electron": "^19.0.0"
+  }
+}
+```
+
+```sh npm2yarn
+npm run start
+```
+
+Your terminal should print out `Hello from Electron 👋`. Congratulations,
+you have executed your first line of code in Electron! Next, you will learn
+how to create user interfaces with HTML and load that into a native window.
+
+## Loading a web page into a BrowserWindow
+
+In Electron, each window displays a web page that can be loaded either from a local HTML
+file or a remote web address. For this example, you will be loading in a local file. Start
+by creating a barebones web page in an `index.html` file in the root folder of your project:
+
+```html title='index.html'
+<!DOCTYPE html>
+<html>
+  <head>
+    <meta charset="UTF-8" />
+    <!-- https://developer.mozilla.org/en-US/docs/Web/HTTP/CSP -->
+    <meta
+      http-equiv="Content-Security-Policy"
+      content="default-src 'self'; script-src 'self'"
+    />
+    <meta
+      http-equiv="X-Content-Security-Policy"
+      content="default-src 'self'; script-src 'self'"
+    />
+    <title>Hello from Electron renderer!</title>
+  </head>
+  <body>
+    <h1>Hello from Electron renderer!</h1>
+    <p>👋</p>
+  </body>
+</html>
+```
+
+Now that you have a web page, you can load it into an Electron [BrowserWindow][browser-window].
+Replace the contents your `main.js` file with the following code. We will explain each
+highlighted block separately.
+
+```js {1,3-10,12-14} title='main.js' showLineNumbers
+const { app, BrowserWindow } = require('electron')
+
+const createWindow = () => {
+  const win = new BrowserWindow({
+    width: 800,
+    height: 600,
+  })
+
+  win.loadFile('index.html')
+}
+
+app.whenReady().then(() => {
+  createWindow()
+})
+```
+
+### Importing modules
+
+```js title='main.js (Line 1)'
+const { app, BrowserWindow } = require('electron')
+```
+
+In the first line, we are importing two Electron modules
+with CommonJS module syntax:
+
+- [app][app], which controls your application's event lifecycle.
+- [BrowserWindow][browser-window], which creates and manages app windows.
+
+:::info Capitalization conventions
+
+You might have noticed the capitalization difference between the **a**pp
+and **B**rowser**W**indow modules. Electron follows typical JavaScript conventions here,
+where PascalCase modules are instantiable class constructors (e.g. BrowserWindow, Tray,
+Notification) whereas camelCase modules are not instantiable (e.g. app, ipcRenderer, webContents).
+
+:::
+
+:::warning ES Modules in Electron
+
+[ECMAScript modules](https://nodejs.org/api/esm.html) (i.e. using `import` to load a module)
+are currently not directly supported in Electron. You can find more information about the
+state of ESM in Electron in [electron/electron#21457](https://github.com/electron/electron/issues/21457).
+
+:::
+
+### Writing a reusable function to instantiate windows
+
+The `createWindow()` function loads your web page into a new BrowserWindow instance:
+
+```js title='main.js (Lines 3-10)'
+const createWindow = () => {
+  const win = new BrowserWindow({
+    width: 800,
+    height: 600,
+  })
+
+  win.loadFile('index.html')
+}
+```
+
+### Calling your function when the app is ready
+
+```js title='main.js (Lines 12-14)'
+app.whenReady().then(() => {
+  createWindow()
+})
+```
+
+Many of Electron's core modules are Node.js [event emitters] that adhere to Node's asynchronous
+event-driven architecture. The app module is one of these emitters.
+
+In Electron, BrowserWindows can only be created after the app module's [`ready`][app-ready] event
+is fired. You can wait for this event by using the [`app.whenReady()`][app-when-ready] API and
+calling `createWindow()` once its promise is fulfilled.
+
+:::info
+
+You typically listen to Node.js events by using an emitter's `.on` function.
+
+```diff
++ app.on('ready').then(() => {
+- app.whenReady().then(() => {
+  createWindow()
+})
+```
+
+However, Electron exposes `app.whenReady()` as a helper specifically for the `ready` event to
+avoid subtle pitfalls with directly listening to that event in particular.
+See [electron/electron#21972](https://github.com/electron/electron/pull/21972) for details.
+
+:::
+
+At this point, running your Electron application's `start` command should successfully
+open a window that displays your web page!
+
+Each web page your app displays in a window will run in a separate process called a
+**renderer** process (or simply _renderer_ for short). Renderer processes have access
+to the same JavaScript APIs and tooling you use for typical front-end web
+development, such as using [webpack] to bundle and minify your code or [React][react]
+to build your user interfaces.
+
+## Managing your app's window lifecycle
+
+Application windows behave differently on each operating system. Rather than
+enforce these conventions by default, Electron gives you the choice to implement
+them in your app code if you wish to follow them. You can implement basic window
+conventions by listening for events emitted by the app and BrowserWindow modules.
+
+:::tip Process-specific control flow
+
+Checking against Node's [`process.platform`][node-platform] variable can help you
+to run code conditionally on certain platforms. Note that there are only three
+possible platforms that Electron can run in: `win32` (Windows), `linux` (Linux),
+and `darwin` (macOS).
+
+:::
+
+### Quit the app when all windows are closed (Windows & Linux)
+
+On Windows and Linux, closing all windows will generally quit an application entirely.
+To implement this pattern in your Electron app, listen for the app module's
+[`window-all-closed`][window-all-closed] event, and call [`app.quit()`][app-quit]
+to exit your app if the user is not on macOS.
+
+```js
+app.on('window-all-closed', () => {
+  if (process.platform !== 'darwin') app.quit()
+})
+```
+
+### Open a window if none are open (macOS)
+
+In contrast, macOS apps generally continue running even without any windows open.
+Activating the app when no windows are available should open a new one.
+
+To implement this feature, listen for the app module's [`activate`][activate]
+event, and call your existing `createWindow()` method if no BrowserWindows are open.
+
+Because windows cannot be created before the `ready` event, you should only listen for
+`activate` events after your app is initialized. Do this by only listening for activate
+events inside your existing `whenReady()` callback.
+
+```js
+app.whenReady().then(() => {
+  createWindow()
+
+  app.on('activate', () => {
+    if (BrowserWindow.getAllWindows().length === 0) createWindow()
+  })
+})
+```
+
+## Final starter code
+
+```fiddle docs/fiddles/tutorial-first-app
+
+```
+
+## Optional: Debugging from VS Code
+
+If you want to debug your application using VS Code, you have need attach VS Code to
+both the main and renderer processes. Here is a sample configuration for you to
+run. Create a launch.json configuration in a new `.vscode` folder in your project:
+
+```json title='.vscode/launch.json'
+{
+  "version": "0.2.0",
+  "compounds": [
+    {
+      "name": "Main + renderer",
+      "configurations": ["Main", "Renderer"],
+      "stopAll": true
+    }
+  ],
+  "configurations": [
+    {
+      "name": "Renderer",
+      "port": 9222,
+      "request": "attach",
+      "type": "pwa-chrome",
+      "webRoot": "${workspaceFolder}"
+    },
+    {
+      "name": "Main",
+      "type": "pwa-node",
+      "request": "launch",
+      "cwd": "${workspaceFolder}",
+      "runtimeExecutable": "${workspaceFolder}/node_modules/.bin/electron",
+      "windows": {
+        "runtimeExecutable": "${workspaceFolder}/node_modules/.bin/electron.cmd"
+      },
+      "args": [".", "--remote-debugging-port=9222"],
+      "outputCapture": "std",
+      "console": "integratedTerminal"
+    }
+  ]
+}
+```
+
+The "Main + renderer" option will appear when you select "Run and Debug"
+from the sidebar, allowing you to set breakpoints and inspect all the variables among
+other things in both the main and renderer processes.
+
+What we have done in the `launch.json` file is to create 3 configurations:
+
+- `Main` is used to start the main process and also expose port 9222 for remote debugging
+  (`--remote-debugging-port=9222`). This is the port that we will use to attach the debugger
+  for the `Renderer`. Because the main process is a Node.js process, the type is set to
+  `pwa-node` (`pwa-` is the prefix that tells VS Code to use the latest JavaScript debugger).
+- `Renderer` is used to debug the renderer process. Because the main process is the one
+  that creates the process, we have to "attach" to it (`"request": "attach"`) instead of
+  creating a new one.
+  The renderer process is a web one, so the debugger we have to use is `pwa-chrome`.
+- `Main + renderer` is a [compound task] that executes the previous ones simultaneously.
+
+:::caution
+
+Because we are attaching to a process in `Renderer`, it is possible that the first lines of
+your code will be skipped as the debugger will not have had enough time to connect before they are
+being executed.
+You can work around this by refreshing the page or setting a timeout before executing the code
+in development mode.
+
+:::
+
+:::info Further reading
+
+If you want to dig deeper in the debugging area, the following guides provide more information:
+
+- [Application Debugging]
+- [DevTools Extensions][devtools extension]
+
+:::
+
+## Summary
+
+Electron applications are set up using npm packages. The Electron executable should be installed
+in your project's `devDependencies` and can be run in development mode using a script in your
+package.json file.
+
+The executable runs the JavaScript entry point found in the `main` property of your package.json.
+This file controls Electron's **main process**, which runs an instance of Node.js and is
+responsible for your app's lifecycle, displaying native interfaces, performing privileged operations,
+and managing renderer processes.
+
+**Renderer processes** (or renderers for short) are responsible for display graphical content. You can
+load a web page into a renderer by pointing it to either a web address or a local HTML file.
+Renderers behave very similarly to regular web pages and have access to the same web APIs.
+
+In the next section of the tutorial, we will be learning how to augment the renderer process with
+privileged APIs and how to communicate between processes.
+
+<!-- Links -->
+
+[activate]: ../api/app.md#event-activate-macos
+[advanced-installation]: installation.md
+[app]: ../api/app.md
+[app-quit]: ../api/app.md#appquit
+[app-ready]: ../api/app.md#event-ready
+[app-when-ready]: ../api/app.md#appwhenready
+[application debugging]: ./application-debugging.md
+[browser-window]: ../api/browser-window.md
+[commonjs]: https://nodejs.org/docs/../api/modules.html#modules_modules_commonjs_modules
+[compound task]: https://code.visualstudio.com/Docs/editor/tasks#_compound-tasks
+[devtools extension]: ./devtools-extension.md
+[event emitters]: https://nodejs.org/api/events.html#events
+[gitignore]: https://git-scm.com/docs/gitignore
+[gitignore-template]: https://github.com/github/gitignore/blob/main/Node.gitignore
+[installation]: ./installation.md
+[node-platform]: https://nodejs.org/api/process.html#process_process_platform
+[package-json-main]: https://docs.npmjs.com/cli/v7/configuring-npm/package-json#main
+[package-scripts]: https://docs.npmjs.com/cli/v7/using-npm/scripts
+[process-model]: process-model.md
+[react]: https://reactjs.org
+[repl]: ./repl.md
+[sandbox]: ./sandbox.md
+[webpack]: https://webpack.js.org
+[window-all-closed]: ../api/app.md#event-window-all-closed
+[wsl]: https://docs.microsoft.com/en-us/windows/wsl/about#what-is-wsl-2
+
+<!-- Tutorial links -->
+
+[prerequisites]: tutorial-1-prerequisites.md
+[building your first app]: tutorial-2-first-app.md
+[preload]: tutorial-3-preload.md
+[features]: tutorial-4-adding-features.md
+[packaging]: tutorial-5-packaging.md
+[updates]: tutorial-6-publishing-updating.md

docs/tutorial/tutorial-3-preload.md

@@ -0,0 +1,271 @@
+---
+title: 'Using Preload Scripts'
+description: 'This guide will step you through the process of creating a barebones Hello World app in Electron, similar to electron/electron-quick-start.'
+slug: tutorial-preload
+hide_title: false
+---
+
+:::info Follow along the tutorial
+
+This is **part 3** of the Electron tutorial.
+
+1. [Prerequisites][prerequisites]
+1. [Building your First App][building your first app]
+1. **[Using Preload Scripts][preload]**
+1. [Adding Features][features]
+1. [Packaging Your Application][packaging]
+1. [Publishing and Updating][updates]
+
+:::
+
+## Learning goals
+
+In this part of the tutorial, you will learn what a preload script is and how to use one
+to securely expose privileged APIs into the renderer process. You will also learn how to
+communicate between main and renderer processes with Electron's inter-process
+communication (IPC) modules.
+
+## What is a preload script?
+
+Electron's main process is a Node.js environment that has full operating system access.
+On top of [Electron modules][modules], you can also access [Node.js built-ins][node-api],
+as well as any packages installed via npm. On the other hand, renderer processes run web
+pages and do not run Node.js by default for security reasons.
+
+To bridge Electron's different process types together, we will need to use a special script
+called a **preload**.
+
+## Augmenting the renderer with a preload script
+
+A BrowserWindow's preload script runs in a context that has access to both the HTML DOM
+and a Node.js environment. Preload scripts are injected before a web page loads in the renderer,
+similar to a Chrome extension's [content scripts][content-script]. To add features to your renderer
+that require privileged access, you can define [global] objects through the
+[contextBridge][contextbridge] API.
+
+To demonstrate this concept, you will create a preload script that exposes your app's
+versions of Chrome, Node, and Electron into the renderer.
+
+Add a new `preload.js` script that exposes selected properties of Electron's `process.versions`
+object to the renderer process in a `versions` global variable.
+
+```js title="preload.js"
+const { contextBridge } = require('electron')
+
+contextBridge.exposeInMainWorld('versions', {
+  node: () => process.versions.node,
+  chrome: () => process.versions.chrome,
+  electron: () => process.versions.electron,
+  // we can also expose variables, not just functions
+})
+```
+
+To attach this script to your renderer process, pass its path to the
+`webPreferences.preload` option in the BrowserWindow constructor:
+
+```js {8-10} title="main.js"
+const { app, BrowserWindow } = require('electron')
+const path = require('path')
+
+const createWindow = () => {
+  const win = new BrowserWindow({
+    width: 800,
+    height: 600,
+    webPreferences: {
+      preload: path.join(__dirname, 'preload.js'),
+    },
+  })
+
+  win.loadFile('index.html')
+}
+
+app.whenReady().then(() => {
+  createWindow()
+})
+```
+
+:::info
+
+There are two Node.js concepts that are used here:
+
+- The [`__dirname`][dirname] string points to the path of the currently executing script
+  (in this case, your project's root folder).
+- The [`path.join`][path-join] API joins multiple path segments together, creating a
+  combined path string that works across all platforms.
+
+:::
+
+At this point, the renderer has access to the `versions` global, so let's display that
+information in the window. This variable can be accessed via `window.versions` or simply
+`versions`. Create a `renderer.js` script that uses the [`document.getElementById`]
+DOM API to replace the displayed text for the HTML element with `info` as its `id` property.
+
+```js title="renderer.js"
+const information = document.getElementById('info')
+information.innerText = `This app is using Chrome (v${versions.chrome()}), Node.js (v${versions.node()}), and Electron (v${versions.electron()})`
+```
+
+Then, modify your `index.html` by adding a new element with `info` as its `id` property,
+and attach your `renderer.js` script:
+
+```html {18,20} title="index.html"
+<!DOCTYPE html>
+<html>
+  <head>
+    <meta charset="UTF-8" />
+    <meta
+      http-equiv="Content-Security-Policy"
+      content="default-src 'self'; script-src 'self'"
+    />
+    <meta
+      http-equiv="X-Content-Security-Policy"
+      content="default-src 'self'; script-src 'self'"
+    />
+    <title>Hello from Electron renderer!</title>
+  </head>
+  <body>
+    <h1>Hello from Electron renderer!</h1>
+    <p>👋</p>
+    <p id="info"></p>
+  </body>
+  <script src="./renderer.js"></script>
+</html>
+```
+
+After following the above steps, your app should look something like this:
+
+![Electron app showing This app is using Chrome (v102.0.5005.63), Node.js (v16.14.2), and Electron (v19.0.3)](../images/preload-example.png)
+
+And the code should look like this:
+
+```fiddle docs/fiddles/tutorial-preload
+
+```
+
+## Communicating between processes
+
+As we have mentioned above, Electron's main and renderer process have distinct responsibilities
+and are not interchangeable. This means it is not possible to access the Node.js APIs directly
+from the renderer process, nor the HTML Document Object Model (DOM) from the main process.
+
+The solution for this problem is to use Electron's `ipcMain` and `ipcRenderer` modules for
+inter-process communication (IPC). To send a message from your web page to the main process,
+you can set up a main process handler with `ipcMain.handle` and
+then expose a function that calls `ipcRenderer.invoke` to trigger the handler in your preload script.
+
+To illustrate, we will add a global function to the renderer called `ping()`
+that will return a string from the main process.
+
+First, set up the `invoke` call in your preload script:
+
+```js {1,7} title="preload.js"
+const { contextBridge, ipcRenderer } = require('electron')
+
+contextBridge.exposeInMainWorld('versions', {
+  node: () => process.versions.node,
+  chrome: () => process.versions.chrome,
+  electron: () => process.versions.electron,
+  ping: () => ipcRenderer.invoke('ping'),
+  // we can also expose variables, not just functions
+})
+```
+
+:::caution IPC security
+
+Notice how we wrap the `ipcRenderer.invoke('ping')` call in a helper function rather
+than expose the `ipcRenderer` module directly via context bridge. You **never** want to
+directly expose the entire `ipcRenderer` module via preload. This would give your renderer
+the ability to send arbitrary IPC messages to the main process, which becomes a powerful
+attack vector for malicious code.
+
+:::
+
+Then, set up your `handle` listener in the main process. We do this _before_
+loading the HTML file so that the handler is guaranteed to be ready before
+you send out the `invoke` call from the renderer.
+
+```js {1,11} title="main.js"
+const { ipcMain } = require('electron')
+
+const createWindow = () => {
+  const win = new BrowserWindow({
+    width: 800,
+    height: 600,
+    webPreferences: {
+      preload: path.join(__dirname, 'preload.js'),
+    },
+  })
+  ipcMain.handle('ping', () => 'pong')
+  win.loadFile('index.html')
+}
+```
+
+Once you have the sender and receiver set up, you can now send messages from the renderer
+to the main process through the `'ping'` channel you just defined.
+
+```js title='renderer.js'
+const func = async () => {
+  const response = await window.versions.ping()
+  console.log(response) // prints out 'pong'
+}
+
+func()
+```
+
+:::info
+
+For more in-depth explanations on using the `ipcRenderer` and `ipcMain` modules,
+check out the full [Inter-Process Communication][ipc] guide.
+
+:::
+
+## Summary
+
+A preload script contains code that runs before your web page is loaded into the browser
+window. It has access to both DOM APIs and Node.js environment, and is often used to
+expose privileged APIs to the renderer via the `contextBridge` API.
+
+Because the main and renderer processes have very different responsibilities, Electron
+apps often use the preload script to set up inter-process communication (IPC) interfaces
+to pass arbitrary messages between the two kinds of processes.
+
+In the next part of the tutorial, we will be showing you resources on adding more
+functionality to your app, then teaching you distributing your app to users.
+
+<!-- Links -->
+
+[advanced-installation]: ./installation.md
+[application debugging]: ./application-debugging.md
+[app]: ../api/app.md
+[app-ready]: ../api/app.md#event-ready
+[app-when-ready]: ../api/app.md#appwhenready
+[browser-window]: ../api/browser-window.md
+[commonjs]: https://nodejs.org/docs/latest/api/modules.html#modules_modules_commonjs_modules
+[compound task]: https://code.visualstudio.com/Docs/editor/tasks#_compound-tasks
+[content-script]: https://developer.chrome.com/docs/extensions/mv3/content_scripts/
+[contextbridge]: ../api/context-bridge.md
+[context-isolation]: ./context-isolation.md
+[`document.getelementbyid`]: https://developer.mozilla.org/en-US/docs/Web/API/Document/getElementById
+[devtools-extension]: ./devtools-extension.md
+[dirname]: https://nodejs.org/api/modules.html#modules_dirname
+[global]: https://developer.mozilla.org/en-US/docs/Glossary/Global_object
+[ipc]: ./ipc.md
+[mdn-csp]: https://developer.mozilla.org/en-US/docs/Web/HTTP/CSP
+[modules]: ../api/app.md
+[node-api]: https://nodejs.org/dist/latest/docs/api/
+[package-json-main]: https://docs.npmjs.com/cli/v7/configuring-npm/package-json#main
+[package-scripts]: https://docs.npmjs.com/cli/v7/using-npm/scripts
+[path-join]: https://nodejs.org/api/path.html#path_path_join_paths
+[process-model]: ./process-model.md
+[react]: https://reactjs.org
+[sandbox]: ./sandbox.md
+[webpack]: https://webpack.js.org
+
+<!-- Tutorial links -->
+
+[prerequisites]: tutorial-1-prerequisites.md
+[building your first app]: tutorial-2-first-app.md
+[preload]: tutorial-3-preload.md
+[features]: tutorial-4-adding-features.md
+[packaging]: tutorial-5-packaging.md
+[updates]: tutorial-6-publishing-updating.md

docs/tutorial/tutorial-4-adding-features.md

@@ -0,0 +1,77 @@
+---
+title: 'Adding Features'
+description: 'In this step of the tutorial, we will share some resources you should read to add features to your application'
+slug: tutorial-adding-features
+hide_title: false
+---
+
+:::info Follow along the tutorial
+
+This is **part 4** of the Electron tutorial.
+
+1. [Prerequisites][prerequisites]
+1. [Building your First App][building your first app]
+1. [Using Preload Scripts][preload]
+1. **[Adding Features][features]**
+1. [Packaging Your Application][packaging]
+1. [Publishing and Updating][updates]
+
+:::
+
+## Adding application complexity
+
+If you have been following along, you should have a functional Electron application
+with a static user interface. From this starting point, you can generally progress
+in developing your app in two broad directions:
+
+1. Adding complexity to your renderer process' web app code
+1. Deeper integrations with the operating system and Node.js
+
+It is important to understand the distinction between these two broad concepts. For the
+first point, Electron-specific resources are not necessary. Building a pretty to-do
+list in Electron is just pointing your Electron BrowserWindow to a pretty
+to-do list web app. Ultimately, you are building your renderer's UI using the same tools
+(HTML, CSS, JavaScript) that you would on the web. Therefore, Electron's docs will
+not go in-depth on how to use standard web tools.
+
+On the other hand, Electron also provides a rich set of tools that allow
+you to integrate with the desktop environment, from creating tray icons to adding
+global shortcuts to displaying native menus. It also gives you all the power of a
+Node.js environment in the main process. This set of capabilities separates
+Electron applications from running a website in a browser tab, and are the
+focus of Electron's documentation.
+
+## How-to examples
+
+Electron's documentation has many tutorials to help you with more advanced topics
+and deeper operating system integrations. To get started, check out the
+[How-To Examples][how-to] doc.
+
+:::note Let us know if something is missing!
+
+If you can't find what you are looking for, please let us know on [GitHub] or in
+our [Discord server][discord]!
+
+:::
+
+## What's next?
+
+For the rest of the tutorial, we will be shifting away from application code
+and giving you a look at how you can get your app from your developer machine
+into end users' hands.
+
+<!-- Link labels -->
+
+[discord]: https://discord.com/invite/APGC3k5yaH
+[github]: https://github.com/electron/electronjs.org-new/issues/new
+[how to]: ./examples.md
+[node-platform]: https://nodejs.org/api/process.html#process_process_platform
+
+<!-- Tutorial links -->
+
+[prerequisites]: tutorial-1-prerequisites.md
+[building your first app]: tutorial-2-first-app.md
+[preload]: tutorial-3-preload.md
+[features]: tutorial-4-adding-features.md
+[packaging]: tutorial-5-packaging.md
+[updates]: tutorial-6-publishing-updating.md

docs/tutorial/tutorial-5-packaging.md

@@ -0,0 +1,225 @@
+---
+title: 'Packaging Your Application'
+description: 'To distribute your app with Electron, you need to package it and create installers.'
+slug: tutorial-packaging
+hide_title: false
+---
+
+import Tabs from '@theme/Tabs';
+import TabItem from '@theme/TabItem';
+
+:::info Follow along the tutorial
+
+This is **part 5** of the Electron tutorial.
+
+1. [Prerequisites][prerequisites]
+1. [Building your First App][building your first app]
+1. [Using Preload Scripts][preload]
+1. [Adding Features][features]
+1. **[Packaging Your Application][packaging]**
+1. [Publishing and Updating][updates]
+
+:::
+
+## Learning goals
+
+In this part of the tutorial, we'll be going over the basics of packaging and distributing
+your app with [Electron Forge].
+
+## Using Electron Forge
+
+Electron does not have any tooling for packaging and distribution bundled into its core
+modules. Once you have a working Electron app in dev mode, you need to use
+additional tooling to create a packaged app you can distribute to your users (also known
+as a **distributable**). Distributables can be either installers (e.g. MSI on Windows) or
+portable executable files (e.g. `.app` on macOS).
+
+Electron Forge is an all-in-one tool that handles the packaging and distribution of Electron
+apps. Under the hood, it combines a lot of existing Electron tools (e.g. [`electron-packager`],
+[`@electron/osx-sign`], [`electron-winstaller`], etc.) into a single interface so you do not
+have to worry about wiring them all together.
+
+### Importing your project into Forge
+
+You can install Electron Forge's CLI in your project's `devDependencies` and import your
+existing project with a handy conversion script.
+
+```sh npm2yarn
+npm install --save-dev @electron-forge/cli
+npx electron-forge import
+```
+
+Once the conversion script is done, Forge should have added a few scripts
+to your `package.json` file.
+
+```json title='package.json'
+  //...
+  "scripts": {
+    "start": "electron-forge start",
+    "package": "electron-forge package",
+    "make": "electron-forge make"
+  },
+  //...
+```
+
+:::info CLI documentation
+
+For more information on `make` and other Forge APIs, check out
+the [Electron Forge CLI documentation].
+
+:::
+
+You should also notice that your package.json now has a few more packages installed
+under your `devDependencies`, and contains an added `config.forge` field with an array
+of makers configured. **Makers** are Forge plugins that create distributables from
+your source code. You should see multiple makers in the pre-populated configuration,
+one for each target platform.
+
+### Creating a distributable
+
+To create a distributable, use your project's new `make` script, which runs the
+`electron-forge make` command.
+
+```sh npm2yarn
+npm run make
+```
+
+This `make` command contains two steps:
+
+1. It will first run `electron-forge package` under the hood, which bundles your app
+   code together with the Electron binary. The packaged code is generated into a folder.
+1. It will then use this packaged app folder to create a separate distributable for each
+   configured maker.
+
+After the script runs, you should see an `out` folder containing both the distributable
+and a folder containing the packaged application code.
+
+```plain title='macOS output example'
+out/
+├── out/make/zip/darwin/x64/my-electron-app-darwin-x64-1.0.0.zip
+├── ...
+└── out/my-electron-app-darwin-x64/my-electron-app.app/Contents/MacOS/my-electron-app
+```
+
+The distributable in the `out/make` folder should be ready to launch! You have now
+created your first bundled Electron application.
+
+:::tip Distributable formats
+
+Electron Forge can be configured to create distributables in different OS-specific formats
+(e.g. DMG, deb, MSI, etc.). See Forge's [Makers] documentation for all configuration options.
+
+:::
+
+:::note Packaging without Electron Forge
+
+If you want to manually package your code, or if you're just interested understanding the
+mechanics behind packaging an Electron app, check out the full [Application Packaging]
+documentation.
+
+:::
+
+## Important: signing your code
+
+In order to distribute desktop applications to end users, we _highly recommended_ for you
+to **code sign** your Electron app. Code signing is an important part of shipping
+desktop applications, and is mandatory for the auto-update step in the final part
+of the tutorial.
+
+Code signing is a security technology that you use to certify that a desktop app was
+created by a known source. Windows and macOS have their own OS-specific code signing
+systems that will make it difficult for users to download or launch unsigned applications.
+
+If you already have code signing certificates for Windows and macOS, you can set your
+credentials in your Forge configuration. Otherwise, please refer to the full
+[Code Signing] documentation to learn how to purchase a certificate and for more information
+on the desktop app code signing process.
+
+On macOS, code signing is done at the app packaging level. On Windows, distributable installers
+are signed instead.
+
+<Tabs>
+  <TabItem value="macos" label="macOS" default>
+
+```json title='package.json' {6-18}
+{
+  //...
+  "config": {
+    "forge": {
+      //...
+      "packagerConfig": {
+        "osxSign": {
+          "identity": "Developer ID Application: Felix Rieseberg (LT94ZKYDCJ)",
+          "hardened-runtime": true,
+          "entitlements": "entitlements.plist",
+          "entitlements-inherit": "entitlements.plist",
+          "signature-flags": "library"
+        },
+        "osxNotarize": {
+          "appleId": "felix@felix.fun",
+          "appleIdPassword": "this-is-a-secret"
+        }
+      }
+      //...
+    }
+  }
+  //...
+}
+```
+
+  </TabItem>
+  <TabItem value="windows" label="Windows">
+
+```json title='package.json'  {6-14}
+{
+  //...
+  "config": {
+    "forge": {
+      //...
+      "makers": [
+        {
+          "name": "@electron-forge/maker-squirrel",
+          "config": {
+            "certificateFile": "./cert.pfx",
+            "certificatePassword": "this-is-a-secret"
+          }
+        }
+      ]
+      //...
+    }
+  }
+  //...
+}
+```
+
+  </TabItem>
+</Tabs>
+
+## Summary
+
+Electron applications need to be packaged to be distributed to users. In this tutorial,
+you imported your app into Electron Forge and configured it to package your app and
+generate installers.
+
+In order for your application to be trusted by the user's system, you need to digitally
+certify that the distributable is authentic and untampered by code signing it. Your app
+can be signed through Forge once you configure it to use your code signing certificate
+information.
+
+[`@electron/osx-sign`]: https://github.com/electron/osx-sign
+[application packaging]: ./application-distribution.md
+[code signing]: ./code-signing.md
+[`electron-packager`]: https://github.com/electron/electron-packager
+[`electron-winstaller`]: https://github.com/electron/windows-installer
+[electron forge]: https://www.electronforge.io
+[electron forge cli documentation]: https://www.electronforge.io/cli#commands
+[makers]: https://www.electronforge.io/config/makers
+
+<!-- Tutorial links -->
+
+[prerequisites]: tutorial-1-prerequisites.md
+[building your first app]: tutorial-2-first-app.md
+[preload]: tutorial-3-preload.md
+[features]: tutorial-4-adding-features.md
+[packaging]: tutorial-5-packaging.md
+[updates]: tutorial-6-publishing-updating.md

docs/tutorial/tutorial-6-publishing-updating.md

@@ -0,0 +1,251 @@
+---
+title: 'Publishing and Updating'
+description: "There are several ways to update an Electron application. The easiest and officially supported one is taking advantage of the built-in Squirrel framework and Electron's autoUpdater module."
+slug: tutorial-publishing-updating
+hide_title: false
+---
+
+:::info Follow along the tutorial
+
+This is **part 6** of the Electron tutorial.
+
+1. [Prerequisites][prerequisites]
+1. [Building your First App][building your first app]
+1. [Using Preload Scripts][preload]
+1. [Adding Features][features]
+1. [Packaging Your Application][packaging]
+1. **[Publishing and Updating][updates]**
+
+:::
+
+## Learning goals
+
+If you've been following along, this is the last step of the tutorial! In this part,
+you will publish your app to GitHub releases and integrate automatic updates
+into your app code.
+
+## Using update.electronjs.org
+
+The Electron maintainers provide a free auto-updating service for open-source apps
+at https://update.electronjs.org. Its requirements are:
+
+- Your app runs on macOS or Windows
+- Your app has a public GitHub repository
+- Builds are published to [GitHub releases]
+- Builds are [code signed][code-signed]
+
+At this point, we'll assume that you have already pushed all your
+code to a public GitHub repository.
+
+:::info Alternative update services
+
+If you're using an alternate repository host (e.g. GitLab or Bitbucket) or if
+you need to keep your code repository private, please refer to our
+[step-by-step guide][update-server] on hosting your own Electron update server.
+
+:::
+
+## Publishing a GitHub release
+
+Electron Forge has [Publisher] plugins that can automate the distribution
+of your packaged application to various sources. In this tutorial, we will
+be using the GitHub Publisher, which will allow us to publish
+our code to GitHub releases.
+
+### Generating a personal access token
+
+Forge cannot publish to any repository on GitHub without permission. You
+need to pass in an authenticated token that gives Forge access to
+your GitHub releases. The easiest way to do this is to
+[create a new personal access token (PAT)][new-pat]
+with the `public_repo` scope, which gives write access to your public repositories.
+**Make sure to keep this token a secret.**
+
+### Setting up the GitHub Publisher
+
+#### Installing the module
+
+Forge's [GitHub Publisher] is a plugin that
+needs to be installed in your project's `devDependencies`:
+
+```sh npm2yarn
+npm install --save-dev @electron-forge/publisher-github
+```
+
+#### Configuring the publisher in Forge
+
+Once you have it installed, you need to set it up in your Forge
+configuration. A full list of options is documented in the Forge's
+[`PublisherGitHubConfig`] API docs.
+
+```json title='package.json' {6-16}
+{
+  //...
+  "config": {
+    "forge": {
+      "publishers": [
+        {
+          "name": "@electron-forge/publisher-github",
+          "config": {
+            "repository": {
+              "owner": "github-user-name",
+              "name": "github-repo-name"
+            },
+            "prerelease": false,
+            "draft": true
+          }
+        }
+      ]
+    }
+  }
+  //...
+}
+```
+
+:::tip Drafting releases before publishing
+
+Notice that you have configured Forge to publish your release as a draft.
+This will allow you to see the release with its generated artifacts
+without actually publishing it to your end users. You can manually
+publish your releases via GitHub after writing release notes and
+double-checking that your distributables work.
+
+:::
+
+#### Setting up your authentication token
+
+You also need to make the Publisher aware of your authentication token.
+By default, it will use the value stored in the `GITHUB_TOKEN` environment
+variable.
+
+### Running the publish command
+
+Add Forge's [publish command] to your npm scripts.
+
+```json {6} title='package.json'
+  //...
+  "scripts": {
+    "start": "electron-forge start",
+    "package": "electron-forge package",
+    "make": "electron-forge make",
+    "publish": "electron-forge publish"
+  },
+  //...
+```
+
+This command will run your configured makers and publish the output distributables to a new
+GitHub release.
+
+```sh npm2yarn
+npm run publish
+```
+
+By default, this will only publish a single distributable for your host operating system and
+architecture. You can publish for different architectures by passing in the `--arch` flag to your
+Forge commands.
+
+The name of this release will correspond to the `version` field in your project's package.json file.
+
+:::tip Tagging releases
+
+Optionally, you can also [tag your releases in Git][git-tag] so that your
+release is associated with a labeled point in your code history. npm comes
+with a handy [`npm version`](https://docs.npmjs.com/cli/v8/commands/npm-version)
+command that can handle the version bumping and tagging for you.
+
+:::
+
+#### Bonus: Publishing in GitHub Actions
+
+Publishing locally can be painful, especially because you can only create distributables
+for your host operating system (i.e. you can't publish a Window `.exe` file from macOS).
+
+A solution for this would be to publish your app via automation workflows
+such as [GitHub Actions], which can run tasks in the
+cloud on Ubuntu, macOS, and Windows. This is the exact approach taken by [Electron Fiddle].
+You can refer to Fiddle's [Build and Release pipeline][fiddle-build]
+and [Forge configuration][fiddle-forge-config]
+for more details.
+
+## Instrumenting your updater code
+
+Now that we have a functional release system via GitHub releases, we now need to tell our
+Electron app to download an update whenever a new release is out. Electron apps do this
+via the [autoUpdater] module, which reads from an update server feed to check if a new version
+is available for download.
+
+The update.electronjs.org service provides an updater-compatible feed. For example, Electron
+Fiddle v0.28.0 will check the endpoint at https://update.electronjs.org/electron/fiddle/darwin/v0.28.0
+to see if a newer GitHub release is available.
+
+After your release is published to GitHub, the update.electronjs.org service should work
+for your application. The only step left is to configure the feed with the autoUpdater module.
+
+To make this process easier, the Electron team maintains the [`update-electron-app`] module,
+which sets up the autoUpdater boilerplate for update.electronjs.org in one function
+call — no configuration required. This module will search for the update.electronjs.org
+feed that matches your project's package.json `"repository"` field.
+
+First, install the module as a runtime dependency.
+
+```sh npm2yarn
+npm install update-electron-app
+```
+
+Then, import the module and call it immediately in the main process.
+
+```js title='main.js'
+require('update-electron-app')()
+```
+
+And that is all it takes! Once your application is packaged, it will update itself for each new
+GitHub release that you publish.
+
+## Summary
+
+In this tutorial, we configured Electron Forge's GitHub Publisher to upload your app's
+distributables to GitHub releases. Since distributables cannot always be generated
+between platforms, we recommend setting up your building and publishing flow
+in a Continuous Integration pipeline if you do not have access to machines.
+
+Electron applications can self-update by pointing the autoUpdater module to an update server feed.
+update.electronjs.org is a free update server provided by Electron for open-source applications
+published on GitHub releases. Configuring your Electron app to use this service is as easy as
+installing and importing the `update-electron-app` module.
+
+If your application is not eligible for update.electronjs.org, you should instead deploy your
+own update server and configure the autoUpdater module yourself.
+
+:::info 🌟 You're done!
+
+From here, you have officially completed our tutorial to Electron. Feel free to explore the
+rest of our docs and happy developing! If you have questions, please stop by our community
+[Discord server].
+
+:::
+
+[autoupdater]: ../api/auto-updater.md
+[code-signed]: ./code-signing.md
+[discord server]: https://discord.com/invite/APGC3k5yaH
+[electron fiddle]: https://electronjs.org/fiddle
+[fiddle-build]: https://github.com/electron/fiddle/blob/master/.github/workflows/build.yaml
+[fiddle-forge-config]: https://github.com/electron/fiddle/blob/master/forge.config.js
+[github actions]: https://github.com/features/actions
+[github publisher]: https://www.electronforge.io/config/publishers/github
+[github releases]: https://docs.github.com/en/repositories/releasing-projects-on-github/managing-releases-in-a-repository
+[git tag]: https://git-scm.com/book/en/v2/Git-Basics-Tagging
+[new-pat]: https://github.com/settings/tokens/new
+[publish command]: https://www.electronforge.io/cli#publish
+[publisher]: https://www.electronforge.io/config/publishers
+[`publishergithubconfig`]: https://js.electronforge.io/publisher/github/interfaces/publishergithubconfig
+[`update-electron-app`]: https://github.com/electron/update-electron-app
+[update-server]: ./updates.md
+
+<!-- Tutorial links -->
+
+[prerequisites]: tutorial-1-prerequisites.md
+[building your first app]: tutorial-2-first-app.md
+[preload]: tutorial-3-preload.md
+[features]: tutorial-4-adding-features.md
+[packaging]: tutorial-5-packaging.md
+[updates]: tutorial-6-publishing-updating.md

docs/tutorial/updates.md

@@ -1,11 +1,16 @@
-# Updating Applications
+---
+title: 'Updating Applications'
+description: "There are several ways to update an Electron application. The easiest and officially supported one is taking advantage of the built-in Squirrel framework and Electron's autoUpdater module."
+slug: updates
+hide_title: false
+---
 
-There are several ways to update an Electron application. The easiest and
-officially supported one is taking advantage of the built-in
+There are several ways to provide automatic updates to your Electron application.
+The easiest and officially supported one is taking advantage of the built-in
 [Squirrel](https://github.com/Squirrel) framework and
 Electron's [autoUpdater](../api/auto-updater.md) module.
 
-## Using `update.electronjs.org`
+## Using update.electronjs.org
 
 The Electron team maintains [update.electronjs.org], a free and open-source
 webservice that Electron apps can use to self-update. The service is designed
@@ -13,72 +18,77 @@ for Electron apps that meet the following criteria:
 
 - App runs on macOS or Windows
 - App has a public GitHub repository
-- Builds are published to GitHub Releases
-- Builds are code-signed
+- Builds are published to [GitHub Releases][gh-releases]
+- Builds are [code-signed](./code-signing.md)
 
 The easiest way to use this service is by installing [update-electron-app],
 a Node.js module preconfigured for use with update.electronjs.org.
 
-Install the module:
+Install the module using your Node.js package manager of choice:
 
-```sh
+```sh npm2yarn
 npm install update-electron-app
 ```
 
-Invoke the updater from your app's main process file:
+Then, invoke the updater from your app's main process file:
 
-```js
+```js title="main.js"
 require('update-electron-app')()
 ```
 
 By default, this module will check for updates at app startup, then every ten
-minutes. When an update is found, it will automatically be downloaded in the background. When the download completes, a dialog is displayed allowing the user
-to restart the app.
+minutes. When an update is found, it will automatically be downloaded in the background.
+When the download completes, a dialog is displayed allowing the user to restart the app.
 
 If you need to customize your configuration, you can
-[pass options to `update-electron-app`][update-electron-app]
+[pass options to update-electron-app][update-electron-app]
 or
 [use the update service directly][update.electronjs.org].
 
-## Deploying an Update Server
+## Using other update services
 
 If you're developing a private Electron application, or if you're not
 publishing releases to GitHub Releases, it may be necessary to run your own
 update server.
 
+### Step 1: Deploying an update server
+
 Depending on your needs, you can choose from one of these:
 
 - [Hazel][hazel] – Update server for private or open-source apps which can be
-deployed for free on [Vercel][vercel]. It pulls from [GitHub Releases][gh-releases]
-and leverages the power of GitHub's CDN.
+  deployed for free on [Vercel][vercel]. It pulls from [GitHub Releases][gh-releases]
+  and leverages the power of GitHub's CDN.
 - [Nuts][nuts] – Also uses [GitHub Releases][gh-releases], but caches app
-updates on disk and supports private repositories.
+  updates on disk and supports private repositories.
 - [electron-release-server][electron-release-server] – Provides a dashboard for
-handling releases and does not require releases to originate on GitHub.
+  handling releases and does not require releases to originate on GitHub.
 - [Nucleus][nucleus] – A complete update server for Electron apps maintained by
-Atlassian. Supports multiple applications and channels; uses a static file store
-to minify server cost.
+  Atlassian. Supports multiple applications and channels; uses a static file store
+  to minify server cost.
 
-## Implementing Updates in Your App
+Once you've deployed your update server, you can instrument your app code to receive and
+apply the updates with Electron's [autoUpdater] module.
 
-Once you've deployed your update server, continue with importing the required
-modules in your code. The following code might vary for different server
-software, but it works like described when using
-[Hazel][hazel].
+### Step 2: Receiving updates in your app
 
-**Important:** Please ensure that the code below will only be executed in
-your packaged app, and not in development. You can use
-[electron-is-dev](https://github.com/sindresorhus/electron-is-dev) to check for
-the environment.
+First, import the required modules in your main process code. The following code might
+vary for different server software, but it works like described when using [Hazel][hazel].
 
-```javascript
+:::warning Check your execution environment!
+
+Please ensure that the code below will only be executed in your packaged app, and not in development.
+You can use the [app.isPackaged](../api/app.md#appispackaged-readonly) API to check the environment.
+
+:::
+
+```javascript title='main.js'
 const { app, autoUpdater, dialog } = require('electron')
 ```
 
-Next, construct the URL of the update server and tell
+Next, construct the URL of the update server feed and tell
 [autoUpdater](../api/auto-updater.md) about it:
 
-```javascript
+```javascript title='main.js'
 const server = 'https://your-deployment-url.com'
 const url = `${server}/update/${process.platform}/${app.getVersion()}`
 
@@ -87,32 +97,32 @@ autoUpdater.setFeedURL({ url })
 
 As the final step, check for updates. The example below will check every minute:
 
-```javascript
+```javascript title='main.js'
 setInterval(() => {
   autoUpdater.checkForUpdates()
 }, 60000)
 ```
 
-Once your application is [packaged](../tutorial/application-distribution.md),
+Once your application is [packaged](./application-distribution.md),
 it will receive an update for each new
 [GitHub Release](https://help.github.com/articles/creating-releases/) that you
 publish.
 
-## Applying Updates
+### Step 3: Notifying users when updates are available
 
 Now that you've configured the basic update mechanism for your application, you
 need to ensure that the user will get notified when there's an update. This
-can be achieved using the autoUpdater API
-[events](../api/auto-updater.md#events):
+can be achieved using the [autoUpdater API events](../api/auto-updater.md#events):
 
-```javascript
+```javascript title="main.js"
 autoUpdater.on('update-downloaded', (event, releaseNotes, releaseName) => {
   const dialogOpts = {
     type: 'info',
     buttons: ['Restart', 'Later'],
     title: 'Application Update',
     message: process.platform === 'win32' ? releaseNotes : releaseName,
-    detail: 'A new version has been downloaded. Restart the application to apply the updates.'
+    detail:
+      'A new version has been downloaded. Restart the application to apply the updates.',
   }
 
   dialog.showMessageBox(dialogOpts).then((returnValue) => {
@@ -125,16 +135,22 @@ Also make sure that errors are
 [being handled](../api/auto-updater.md#event-error). Here's an example
 for logging them to `stderr`:
 
-```javascript
-autoUpdater.on('error', message => {
+```javascript title="main.js"
+autoUpdater.on('error', (message) => {
   console.error('There was a problem updating the application')
   console.error(message)
 })
 ```
 
-## Handling Updates Manually
+:::info Handling updates manually
 
-Because the requests made by Auto Update aren't under your direct control, you may find situations that are difficult to handle (such as if the update server is behind authentication). The `url` field does support files, which means that with some effort, you can sidestep the server-communication aspect of the process. [Here's an example of how this could work](https://github.com/electron/electron/issues/5020#issuecomment-477636990).
+Because the requests made by autoUpdate aren't under your direct control, you may find situations
+that are difficult to handle (such as if the update server is behind authentication). The `url`
+field supports the `file://` protocol, which means that with some effort, you can sidestep the
+server-communication aspect of the process by loading your update from a local directory.
+[Here's an example of how this could work](https://github.com/electron/electron/issues/5020#issuecomment-477636990).
+
+:::
 
 [vercel]: https://vercel.com
 [hazel]: https://github.com/vercel/hazel

docs/tutorial/window-customization.md

@@ -115,7 +115,7 @@ const win = new BrowserWindow({
 })
 ```
 
-On Windows, you can also specify additional parameters. The color of the overlay and its symbols can be specified by setting `titleBarOverlay` to an object and using the `color` and `symbolColor` properties respectively. The height of the overlay can also be specified with the `height` property.
+On either platform `titleBarOverlay` can also be an object. On both macOS and Windows, the height of the overlay can be specified with the `height` property. On Windows, the color of the overlay and its symbols can be specified using the `color` and `symbolColor` properties respectively.
 
 If a color option is not specified, the color will default to its system color for the window control buttons. Similarly, if the height option is not specified it will default to the default height:
 

docs/tutorial/windows-taskbar.md

@@ -41,10 +41,9 @@ as quoted from [MSDN][msdn-jumplist]:
 > confuse the user who does not expect that portion of the destination list to
 > change.
 
-![IE](https://i-msdn.sec.s-msft.com/dynimg/IC420539.png)
+![Taskbar JumpList](../images/windows-taskbar-jumplist.png)
 
-> NOTE: The screenshot above is an example of general tasks of
-Internet Explorer
+> NOTE: The screenshot above is an example of general tasks for Microsoft Edge
 
 Unlike the dock menu in macOS which is a real menu, user tasks in Windows work
 like application shortcuts. For example, when a user clicks a task, the program
@@ -109,7 +108,7 @@ As quoted from [MSDN][msdn-thumbnail]:
 > For example, Windows Media Player might offer standard media transport controls
 > such as play, pause, mute, and stop.
 
-![player](https://i-msdn.sec.s-msft.com/dynimg/IC420540.png)
+![Thumbnail toolbar](../images/windows-taskbar-thumbnail-toolbar.png)
 
 > NOTE: The screenshot above is an example of thumbnail toolbar of Windows
 Media Player
@@ -176,7 +175,7 @@ As quoted from [MSDN][msdn-icon-overlay]:
 > network status, messenger status, or new mail. The user should not be
 > presented with constantly changing overlays or animations.
 
-![Overlay on taskbar button](https://i-msdn.sec.s-msft.com/dynimg/IC420441.png)
+![Overlay on taskbar button](../images/windows-taskbar-icon-overlay.png)
 
 > NOTE: The screenshot above is an example of overlay on a taskbar button
 

electron_paks.gni

@@ -19,14 +19,12 @@ template("electron_repack_percent") {
     # All sources should also have deps for completeness.
     sources = [
       "$root_gen_dir/components/components_resources_${percent}_percent.pak",
-      "$root_gen_dir/content/app/resources/content_resources_${percent}_percent.pak",
       "$root_gen_dir/third_party/blink/public/resources/blink_scaled_resources_${percent}_percent.pak",
       "$root_gen_dir/ui/resources/ui_resources_${percent}_percent.pak",
     ]
 
     deps = [
       "//components/resources",
-      "//content/app/resources",
       "//third_party/blink/public:scaled_resources_${percent}_percent",
       "//ui/resources",
     ]

filenames.gni

@@ -105,6 +105,8 @@ filenames = {
     "shell/browser/ui/win/notify_icon.h",
     "shell/browser/ui/win/taskbar_host.cc",
     "shell/browser/ui/win/taskbar_host.h",
+    "shell/browser/win/dark_mode.cc",
+    "shell/browser/win/dark_mode.h",
     "shell/browser/win/scoped_hstring.cc",
     "shell/browser/win/scoped_hstring.h",
     "shell/common/api/electron_api_native_image_win.cc",
@@ -165,6 +167,8 @@ filenames = {
     "shell/browser/ui/cocoa/electron_native_widget_mac.mm",
     "shell/browser/ui/cocoa/electron_ns_window_delegate.h",
     "shell/browser/ui/cocoa/electron_ns_window_delegate.mm",
+    "shell/browser/ui/cocoa/electron_ns_panel.h",
+    "shell/browser/ui/cocoa/electron_ns_panel.mm",
     "shell/browser/ui/cocoa/electron_ns_window.h",
     "shell/browser/ui/cocoa/electron_ns_window.mm",
     "shell/browser/ui/cocoa/electron_preview_item.h",

filenames.libcxx.gni

@@ -1,49 +1,376 @@
 libcxx_headers = [
   "//buildtools/third_party/libc++/trunk/include/CMakeLists.txt",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/adjacent_find.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/all_of.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/any_of.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/binary_search.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/clamp.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/comp.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/comp_ref_type.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/copy.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/copy_backward.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/copy_if.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/copy_n.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/count.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/count_if.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/equal.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/equal_range.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/fill.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/fill_n.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/find.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/find_end.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/find_first_of.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/find_if.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/find_if_not.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/for_each.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/for_each_n.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/generate.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/generate_n.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/half_positive.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/in_found_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/in_fun_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/in_in_out_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/in_in_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/in_out_out_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/in_out_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/includes.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/inplace_merge.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/is_heap.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/is_heap_until.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/is_partitioned.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/is_permutation.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/is_sorted.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/is_sorted_until.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/iter_swap.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/lexicographical_compare.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/lower_bound.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/make_heap.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/max.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/max_element.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/merge.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/min.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/min_element.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/min_max_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/minmax.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/minmax_element.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/mismatch.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/move.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/move_backward.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/next_permutation.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/none_of.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/nth_element.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/partial_sort.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/partial_sort_copy.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/partition.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/partition_copy.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/partition_point.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/pop_heap.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/prev_permutation.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/push_heap.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/ranges_find.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/ranges_find_if.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/ranges_find_if_not.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/ranges_max_element.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/ranges_min.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/ranges_min_element.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/ranges_mismatch.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/ranges_swap_ranges.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/remove.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/remove_copy.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/remove_copy_if.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/remove_if.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/replace.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/replace_copy.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/replace_copy_if.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/replace_if.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/reverse.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/reverse_copy.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/rotate.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/rotate_copy.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/sample.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/search.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/search_n.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/set_difference.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/set_intersection.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/set_symmetric_difference.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/set_union.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/shift_left.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/shift_right.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/shuffle.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/sift_down.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/sort.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/sort_heap.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/stable_partition.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/stable_sort.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/swap_ranges.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/transform.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/unique.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/unique_copy.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/unwrap_iter.h",
+  "//buildtools/third_party/libc++/trunk/include/__algorithm/upper_bound.h",
+  "//buildtools/third_party/libc++/trunk/include/__assert",
   "//buildtools/third_party/libc++/trunk/include/__availability",
+  "//buildtools/third_party/libc++/trunk/include/__bit/bit_cast.h",
+  "//buildtools/third_party/libc++/trunk/include/__bit/byteswap.h",
   "//buildtools/third_party/libc++/trunk/include/__bit_reference",
   "//buildtools/third_party/libc++/trunk/include/__bits",
   "//buildtools/third_party/libc++/trunk/include/__bsd_locale_defaults.h",
   "//buildtools/third_party/libc++/trunk/include/__bsd_locale_fallbacks.h",
+  "//buildtools/third_party/libc++/trunk/include/__charconv/chars_format.h",
+  "//buildtools/third_party/libc++/trunk/include/__charconv/from_chars_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__charconv/to_chars_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__chrono/calendar.h",
+  "//buildtools/third_party/libc++/trunk/include/__chrono/convert_to_timespec.h",
+  "//buildtools/third_party/libc++/trunk/include/__chrono/duration.h",
+  "//buildtools/third_party/libc++/trunk/include/__chrono/file_clock.h",
+  "//buildtools/third_party/libc++/trunk/include/__chrono/high_resolution_clock.h",
+  "//buildtools/third_party/libc++/trunk/include/__chrono/steady_clock.h",
+  "//buildtools/third_party/libc++/trunk/include/__chrono/system_clock.h",
+  "//buildtools/third_party/libc++/trunk/include/__chrono/time_point.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/common_comparison_category.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/compare_partial_order_fallback.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/compare_strong_order_fallback.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/compare_three_way.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/compare_three_way_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/compare_weak_order_fallback.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/is_eq.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/ordering.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/partial_order.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/strong_order.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/synth_three_way.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/three_way_comparable.h",
+  "//buildtools/third_party/libc++/trunk/include/__compare/weak_order.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/arithmetic.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/assignable.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/boolean_testable.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/class_or_enum.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/common_reference_with.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/common_with.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/constructible.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/convertible_to.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/copyable.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/derived_from.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/destructible.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/different_from.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/equality_comparable.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/invocable.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/movable.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/predicate.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/regular.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/relation.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/same_as.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/semiregular.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/swappable.h",
+  "//buildtools/third_party/libc++/trunk/include/__concepts/totally_ordered.h",
   "//buildtools/third_party/libc++/trunk/include/__config",
   "//buildtools/third_party/libc++/trunk/include/__config_site.in",
+  "//buildtools/third_party/libc++/trunk/include/__coroutine/coroutine_handle.h",
+  "//buildtools/third_party/libc++/trunk/include/__coroutine/coroutine_traits.h",
+  "//buildtools/third_party/libc++/trunk/include/__coroutine/noop_coroutine_handle.h",
+  "//buildtools/third_party/libc++/trunk/include/__coroutine/trivial_awaitables.h",
   "//buildtools/third_party/libc++/trunk/include/__debug",
   "//buildtools/third_party/libc++/trunk/include/__errc",
-  "//buildtools/third_party/libc++/trunk/include/__functional_03",
-  "//buildtools/third_party/libc++/trunk/include/__functional_base",
-  "//buildtools/third_party/libc++/trunk/include/__functional_base_03",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/copy_options.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/directory_entry.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/directory_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/directory_options.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/file_status.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/file_time_type.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/file_type.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/filesystem_error.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/operations.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/path.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/path_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/perm_options.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/perms.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/recursive_directory_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/space_info.h",
+  "//buildtools/third_party/libc++/trunk/include/__filesystem/u8path.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/format_arg.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/format_args.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/format_context.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/format_error.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/format_fwd.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/format_parse_context.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/format_string.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/format_to_n_result.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/formatter.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/formatter_bool.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/formatter_char.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/formatter_floating_point.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/formatter_integer.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/formatter_integral.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/formatter_pointer.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/formatter_string.h",
+  "//buildtools/third_party/libc++/trunk/include/__format/parser_std_format_spec.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/binary_function.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/binary_negate.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/bind.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/bind_back.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/bind_front.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/binder1st.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/binder2nd.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/compose.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/default_searcher.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/function.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/hash.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/identity.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/invoke.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/is_transparent.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/mem_fn.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/mem_fun_ref.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/not_fn.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/operations.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/perfect_forward.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/pointer_to_binary_function.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/pointer_to_unary_function.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/ranges_operations.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/reference_wrapper.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/unary_function.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/unary_negate.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/unwrap_ref.h",
+  "//buildtools/third_party/libc++/trunk/include/__functional/weak_result_type.h",
   "//buildtools/third_party/libc++/trunk/include/__hash_table",
+  "//buildtools/third_party/libc++/trunk/include/__ios/fpos.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/access.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/advance.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/back_insert_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/common_iterator.h",
   "//buildtools/third_party/libc++/trunk/include/__iterator/concepts.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/counted_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/data.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/default_sentinel.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/distance.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/empty.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/erase_if_container.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/front_insert_iterator.h",
   "//buildtools/third_party/libc++/trunk/include/__iterator/incrementable_traits.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/indirectly_comparable.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/insert_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/istream_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/istreambuf_iterator.h",
   "//buildtools/third_party/libc++/trunk/include/__iterator/iter_move.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/iter_swap.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/iterator.h",
   "//buildtools/third_party/libc++/trunk/include/__iterator/iterator_traits.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/mergeable.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/move_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/next.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/ostream_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/ostreambuf_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/permutable.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/prev.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/projected.h",
   "//buildtools/third_party/libc++/trunk/include/__iterator/readable_traits.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/reverse_access.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/reverse_iterator.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/size.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/sortable.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/unreachable_sentinel.h",
+  "//buildtools/third_party/libc++/trunk/include/__iterator/wrap_iter.h",
   "//buildtools/third_party/libc++/trunk/include/__libcpp_version",
   "//buildtools/third_party/libc++/trunk/include/__locale",
+  "//buildtools/third_party/libc++/trunk/include/__mbstate_t.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/addressof.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/allocation_guard.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/allocator.h",
+  "//buildtools/third_party/libc++/trunk/include/__memory/allocator_arg_t.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/allocator_traits.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/auto_ptr.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/compressed_pair.h",
+  "//buildtools/third_party/libc++/trunk/include/__memory/concepts.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/construct_at.h",
-  "//buildtools/third_party/libc++/trunk/include/__memory/pointer_safety.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/pointer_traits.h",
+  "//buildtools/third_party/libc++/trunk/include/__memory/ranges_construct_at.h",
+  "//buildtools/third_party/libc++/trunk/include/__memory/ranges_uninitialized_algorithms.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/raw_storage_iterator.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/shared_ptr.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/temporary_buffer.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/uninitialized_algorithms.h",
   "//buildtools/third_party/libc++/trunk/include/__memory/unique_ptr.h",
+  "//buildtools/third_party/libc++/trunk/include/__memory/uses_allocator.h",
+  "//buildtools/third_party/libc++/trunk/include/__memory/voidify.h",
   "//buildtools/third_party/libc++/trunk/include/__mutex_base",
   "//buildtools/third_party/libc++/trunk/include/__node_handle",
-  "//buildtools/third_party/libc++/trunk/include/__nullptr",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/accumulate.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/adjacent_difference.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/exclusive_scan.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/gcd_lcm.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/inclusive_scan.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/inner_product.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/iota.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/midpoint.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/partial_sum.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/reduce.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/transform_exclusive_scan.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/transform_inclusive_scan.h",
+  "//buildtools/third_party/libc++/trunk/include/__numeric/transform_reduce.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/bernoulli_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/binomial_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/cauchy_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/chi_squared_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/clamp_to_integral.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/default_random_engine.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/discard_block_engine.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/discrete_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/exponential_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/extreme_value_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/fisher_f_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/gamma_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/generate_canonical.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/geometric_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/independent_bits_engine.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/is_seed_sequence.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/is_valid.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/knuth_b.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/linear_congruential_engine.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/log2.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/lognormal_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/mersenne_twister_engine.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/negative_binomial_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/normal_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/piecewise_constant_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/piecewise_linear_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/poisson_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/random_device.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/ranlux.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/seed_seq.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/shuffle_order_engine.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/student_t_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/subtract_with_carry_engine.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/uniform_int_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/uniform_random_bit_generator.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/uniform_real_distribution.h",
+  "//buildtools/third_party/libc++/trunk/include/__random/weibull_distribution.h",
   "//buildtools/third_party/libc++/trunk/include/__ranges/access.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/all.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/common_view.h",
   "//buildtools/third_party/libc++/trunk/include/__ranges/concepts.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/copyable_box.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/counted.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/dangling.h",
   "//buildtools/third_party/libc++/trunk/include/__ranges/data.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/drop_view.h",
   "//buildtools/third_party/libc++/trunk/include/__ranges/empty.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/empty_view.h",
   "//buildtools/third_party/libc++/trunk/include/__ranges/enable_borrowed_range.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/enable_view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/iota_view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/join_view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/non_propagating_cache.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/owning_view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/range_adaptor.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/rbegin.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/ref_view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/rend.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/reverse_view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/single_view.h",
   "//buildtools/third_party/libc++/trunk/include/__ranges/size.h",
-  "//buildtools/third_party/libc++/trunk/include/__ranges/view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/subrange.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/take_view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/transform_view.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/view_interface.h",
+  "//buildtools/third_party/libc++/trunk/include/__ranges/views.h",
   "//buildtools/third_party/libc++/trunk/include/__split_buffer",
   "//buildtools/third_party/libc++/trunk/include/__std_stream",
   "//buildtools/third_party/libc++/trunk/include/__string",
@@ -51,14 +378,12 @@ libcxx_headers = [
   "//buildtools/third_party/libc++/trunk/include/__support/fuchsia/xlocale.h",
   "//buildtools/third_party/libc++/trunk/include/__support/ibm/gettod_zos.h",
   "//buildtools/third_party/libc++/trunk/include/__support/ibm/limits.h",
-  "//buildtools/third_party/libc++/trunk/include/__support/ibm/locale_mgmt_aix.h",
   "//buildtools/third_party/libc++/trunk/include/__support/ibm/locale_mgmt_zos.h",
   "//buildtools/third_party/libc++/trunk/include/__support/ibm/nanosleep.h",
   "//buildtools/third_party/libc++/trunk/include/__support/ibm/support.h",
   "//buildtools/third_party/libc++/trunk/include/__support/ibm/xlocale.h",
   "//buildtools/third_party/libc++/trunk/include/__support/musl/xlocale.h",
   "//buildtools/third_party/libc++/trunk/include/__support/newlib/xlocale.h",
-  "//buildtools/third_party/libc++/trunk/include/__support/nuttx/xlocale.h",
   "//buildtools/third_party/libc++/trunk/include/__support/openbsd/xlocale.h",
   "//buildtools/third_party/libc++/trunk/include/__support/solaris/floatingpoint.h",
   "//buildtools/third_party/libc++/trunk/include/__support/solaris/wchar.h",
@@ -68,11 +393,30 @@ libcxx_headers = [
   "//buildtools/third_party/libc++/trunk/include/__support/xlocale/__nop_locale_mgmt.h",
   "//buildtools/third_party/libc++/trunk/include/__support/xlocale/__posix_l_fallback.h",
   "//buildtools/third_party/libc++/trunk/include/__support/xlocale/__strtonum_fallback.h",
+  "//buildtools/third_party/libc++/trunk/include/__thread/poll_with_backoff.h",
+  "//buildtools/third_party/libc++/trunk/include/__thread/timed_backoff_policy.h",
   "//buildtools/third_party/libc++/trunk/include/__threading_support",
   "//buildtools/third_party/libc++/trunk/include/__tree",
   "//buildtools/third_party/libc++/trunk/include/__tuple",
   "//buildtools/third_party/libc++/trunk/include/__undef_macros",
+  "//buildtools/third_party/libc++/trunk/include/__utility/as_const.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/auto_cast.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/cmp.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/declval.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/exchange.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/forward.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/in_place.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/integer_sequence.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/move.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/pair.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/piecewise_construct.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/priority_tag.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/rel_ops.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/swap.h",
   "//buildtools/third_party/libc++/trunk/include/__utility/to_underlying.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/transaction.h",
+  "//buildtools/third_party/libc++/trunk/include/__utility/unreachable.h",
+  "//buildtools/third_party/libc++/trunk/include/__variant/monostate.h",
   "//buildtools/third_party/libc++/trunk/include/algorithm",
   "//buildtools/third_party/libc++/trunk/include/any",
   "//buildtools/third_party/libc++/trunk/include/array",
@@ -99,6 +443,7 @@ libcxx_headers = [
   "//buildtools/third_party/libc++/trunk/include/complex.h",
   "//buildtools/third_party/libc++/trunk/include/concepts",
   "//buildtools/third_party/libc++/trunk/include/condition_variable",
+  "//buildtools/third_party/libc++/trunk/include/coroutine",
   "//buildtools/third_party/libc++/trunk/include/csetjmp",
   "//buildtools/third_party/libc++/trunk/include/csignal",
   "//buildtools/third_party/libc++/trunk/include/cstdarg",
@@ -111,6 +456,7 @@ libcxx_headers = [
   "//buildtools/third_party/libc++/trunk/include/ctgmath",
   "//buildtools/third_party/libc++/trunk/include/ctime",
   "//buildtools/third_party/libc++/trunk/include/ctype.h",
+  "//buildtools/third_party/libc++/trunk/include/cuchar",
   "//buildtools/third_party/libc++/trunk/include/cwchar",
   "//buildtools/third_party/libc++/trunk/include/cwctype",
   "//buildtools/third_party/libc++/trunk/include/deque",
@@ -122,7 +468,6 @@ libcxx_headers = [
   "//buildtools/third_party/libc++/trunk/include/experimental/algorithm",
   "//buildtools/third_party/libc++/trunk/include/experimental/coroutine",
   "//buildtools/third_party/libc++/trunk/include/experimental/deque",
-  "//buildtools/third_party/libc++/trunk/include/experimental/filesystem",
   "//buildtools/third_party/libc++/trunk/include/experimental/forward_list",
   "//buildtools/third_party/libc++/trunk/include/experimental/functional",
   "//buildtools/third_party/libc++/trunk/include/experimental/iterator",
@@ -205,6 +550,7 @@ libcxx_headers = [
   "//buildtools/third_party/libc++/trunk/include/type_traits",
   "//buildtools/third_party/libc++/trunk/include/typeindex",
   "//buildtools/third_party/libc++/trunk/include/typeinfo",
+  "//buildtools/third_party/libc++/trunk/include/uchar.h",
   "//buildtools/third_party/libc++/trunk/include/unordered_map",
   "//buildtools/third_party/libc++/trunk/include/unordered_set",
   "//buildtools/third_party/libc++/trunk/include/utility",

lib/browser/api/native-theme.ts

@@ -1,3 +1,3 @@
-const { nativeTheme } = process._linkedBinding('electron_common_native_theme');
+const { nativeTheme } = process._linkedBinding('electron_browser_native_theme');
 
 module.exports = nativeTheme;

lib/browser/api/notification.ts

@@ -1,7 +1,7 @@
 const {
   Notification: ElectronNotification,
   isSupported
-} = process._linkedBinding('electron_common_notification');
+} = process._linkedBinding('electron_browser_notification');
 
 ElectronNotification.isSupported = isSupported;
 

lib/browser/api/screen.ts

@@ -1,6 +1,6 @@
 import { EventEmitter } from 'events';
 
-const { createScreen } = process._linkedBinding('electron_common_screen');
+const { createScreen } = process._linkedBinding('electron_browser_screen');
 
 let _screen: Electron.Screen;
 

lib/browser/api/web-contents.ts

@@ -10,7 +10,7 @@ import * as ipcMainUtils from '@electron/internal/browser/ipc-main-internal-util
 import { MessagePortMain } from '@electron/internal/browser/message-port-main';
 import { IPC_MESSAGES } from '@electron/internal/common/ipc-messages';
 
-// session is not used here, the purpose is to make sure session is initalized
+// session is not used here, the purpose is to make sure session is initialized
 // before the webContents module.
 // eslint-disable-next-line
 session
@@ -63,6 +63,20 @@ const PDFPageSizes: Record<string, ElectronInternal.MediaSize> = {
   }
 } as const;
 
+const paperFormats: Record<string, ElectronInternal.PageSize> = {
+  letter: { width: 8.5, height: 11 },
+  legal: { width: 8.5, height: 14 },
+  tabloid: { width: 11, height: 17 },
+  ledger: { width: 17, height: 11 },
+  a0: { width: 33.1, height: 46.8 },
+  a1: { width: 23.4, height: 33.1 },
+  a2: { width: 16.54, height: 23.4 },
+  a3: { width: 11.7, height: 16.54 },
+  a4: { width: 8.27, height: 11.7 },
+  a5: { width: 5.83, height: 8.27 },
+  a6: { width: 4.13, height: 5.83 }
+} as const;
+
 // The minimum micron size Chromium accepts is that where:
 // Per printing/units.h:
 //  * kMicronsPerInch - Length of an inch in 0.001mm unit.
@@ -76,42 +90,6 @@ const isValidCustomPageSize = (width: number, height: number) => {
   return [width, height].every(x => x > 352);
 };
 
-// Default printing setting
-const defaultPrintingSetting = {
-  // Customizable.
-  pageRange: [] as {from: number, to: number}[],
-  mediaSize: {} as ElectronInternal.MediaSize,
-  landscape: false,
-  headerFooterEnabled: false,
-  marginsType: 0,
-  scaleFactor: 100,
-  shouldPrintBackgrounds: false,
-  shouldPrintSelectionOnly: false,
-  // Non-customizable.
-  printWithCloudPrint: false,
-  printWithPrivet: false,
-  printWithExtension: false,
-  pagesPerSheet: 1,
-  isFirstRequest: false,
-  previewUIID: 0,
-  // True, if the document source is modifiable. e.g. HTML and not PDF.
-  previewModifiable: true,
-  printToPDF: true,
-  deviceName: 'Save as PDF',
-  generateDraftData: true,
-  dpiHorizontal: 72,
-  dpiVertical: 72,
-  rasterizePDF: false,
-  duplex: 0,
-  copies: 1,
-  // 2 = color - see ColorModel in //printing/print_job_constants.h
-  color: 2,
-  collate: true,
-  printerType: 2,
-  title: undefined as string | undefined,
-  url: undefined as string | undefined
-} as const;
-
 // JavaScript implementations of WebContents.
 const binding = process._linkedBinding('electron_browser_web_contents');
 const printing = process._linkedBinding('electron_browser_printing');
@@ -193,136 +171,136 @@ WebContents.prototype.executeJavaScriptInIsolatedWorld = async function (worldId
 let pendingPromise: Promise<any> | undefined;
 WebContents.prototype.printToPDF = async function (options) {
   const printSettings: Record<string, any> = {
-    ...defaultPrintingSetting,
-    requestID: getNextId()
+    requestID: getNextId(),
+    landscape: false,
+    displayHeaderFooter: false,
+    headerTemplate: '',
+    footerTemplate: '',
+    printBackground: false,
+    scale: 1,
+    paperWidth: 8.5,
+    paperHeight: 11,
+    marginTop: 0,
+    marginBottom: 0,
+    marginLeft: 0,
+    marginRight: 0,
+    pageRanges: '',
+    preferCSSPageSize: false
   };
 
   if (options.landscape !== undefined) {
     if (typeof options.landscape !== 'boolean') {
-      const error = new Error('landscape must be a Boolean');
-      return Promise.reject(error);
+      return Promise.reject(new Error('landscape must be a Boolean'));
     }
     printSettings.landscape = options.landscape;
   }
 
-  if (options.scaleFactor !== undefined) {
-    if (typeof options.scaleFactor !== 'number') {
-      const error = new Error('scaleFactor must be a Number');
-      return Promise.reject(error);
+  if (options.displayHeaderFooter !== undefined) {
+    if (typeof options.displayHeaderFooter !== 'boolean') {
+      return Promise.reject(new Error('displayHeaderFooter must be a Boolean'));
     }
-    printSettings.scaleFactor = options.scaleFactor;
-  }
-
-  if (options.marginsType !== undefined) {
-    if (typeof options.marginsType !== 'number') {
-      const error = new Error('marginsType must be a Number');
-      return Promise.reject(error);
-    }
-    printSettings.marginsType = options.marginsType;
-  }
-
-  if (options.printSelectionOnly !== undefined) {
-    if (typeof options.printSelectionOnly !== 'boolean') {
-      const error = new Error('printSelectionOnly must be a Boolean');
-      return Promise.reject(error);
-    }
-    printSettings.shouldPrintSelectionOnly = options.printSelectionOnly;
+    printSettings.displayHeaderFooter = options.displayHeaderFooter;
   }
 
   if (options.printBackground !== undefined) {
     if (typeof options.printBackground !== 'boolean') {
-      const error = new Error('printBackground must be a Boolean');
-      return Promise.reject(error);
+      return Promise.reject(new Error('printBackground must be a Boolean'));
     }
     printSettings.shouldPrintBackgrounds = options.printBackground;
   }
 
-  if (options.pageRanges !== undefined) {
-    const pageRanges = options.pageRanges;
-    if (!Object.prototype.hasOwnProperty.call(pageRanges, 'from') || !Object.prototype.hasOwnProperty.call(pageRanges, 'to')) {
-      const error = new Error('pageRanges must be an Object with \'from\' and \'to\' properties');
-      return Promise.reject(error);
+  if (options.scale !== undefined) {
+    if (typeof options.scale !== 'number') {
+      return Promise.reject(new Error('scale must be a Number'));
     }
-
-    if (typeof pageRanges.from !== 'number') {
-      const error = new Error('pageRanges.from must be a Number');
-      return Promise.reject(error);
-    }
-
-    if (typeof pageRanges.to !== 'number') {
-      const error = new Error('pageRanges.to must be a Number');
-      return Promise.reject(error);
-    }
-
-    // Chromium uses 1-based page ranges, so increment each by 1.
-    printSettings.pageRange = [{
-      from: pageRanges.from + 1,
-      to: pageRanges.to + 1
-    }];
+    printSettings.scaleFactor = options.scale;
   }
 
-  if (options.headerFooter !== undefined) {
-    const headerFooter = options.headerFooter;
-    printSettings.headerFooterEnabled = true;
-    if (typeof headerFooter === 'object') {
-      if (!headerFooter.url || !headerFooter.title) {
-        const error = new Error('url and title properties are required for headerFooter');
-        return Promise.reject(error);
+  const { pageSize } = options;
+  if (pageSize !== undefined) {
+    if (typeof pageSize === 'string') {
+      const format = paperFormats[pageSize.toLowerCase()];
+      if (!format) {
+        return Promise.reject(new Error(`Invalid pageSize ${pageSize}`));
       }
-      if (typeof headerFooter.title !== 'string') {
-        const error = new Error('headerFooter.title must be a String');
-        return Promise.reject(error);
-      }
-      printSettings.title = headerFooter.title;
 
-      if (typeof headerFooter.url !== 'string') {
-        const error = new Error('headerFooter.url must be a String');
-        return Promise.reject(error);
-      }
-      printSettings.url = headerFooter.url;
-    } else {
-      const error = new Error('headerFooter must be an Object');
-      return Promise.reject(error);
-    }
-  }
-
-  // Optionally set size for PDF.
-  if (options.pageSize !== undefined) {
-    const pageSize = options.pageSize;
-    if (typeof pageSize === 'object') {
+      printSettings.paperWidth = format.width;
+      printSettings.paperHeight = format.height;
+    } else if (typeof options.pageSize === 'object') {
       if (!pageSize.height || !pageSize.width) {
-        const error = new Error('height and width properties are required for pageSize');
-        return Promise.reject(error);
+        return Promise.reject(new Error('height and width properties are required for pageSize'));
       }
 
-      // Dimensions in Microns - 1 meter = 10^6 microns
-      const height = Math.ceil(pageSize.height);
-      const width = Math.ceil(pageSize.width);
-      if (!isValidCustomPageSize(width, height)) {
-        const error = new Error('height and width properties must be minimum 352 microns.');
-        return Promise.reject(error);
-      }
-
-      printSettings.mediaSize = {
-        name: 'CUSTOM',
-        custom_display_name: 'Custom',
-        height_microns: height,
-        width_microns: width
-      };
-    } else if (Object.prototype.hasOwnProperty.call(PDFPageSizes, pageSize)) {
-      printSettings.mediaSize = PDFPageSizes[pageSize];
+      printSettings.paperWidth = pageSize.width;
+      printSettings.paperHeight = pageSize.height;
     } else {
-      const error = new Error(`Unsupported pageSize: ${pageSize}`);
-      return Promise.reject(error);
+      return Promise.reject(new Error('pageSize must be a String or Object'));
     }
-  } else {
-    printSettings.mediaSize = PDFPageSizes.A4;
   }
 
-  // Chromium expects this in a 0-100 range number, not as float
-  printSettings.scaleFactor = Math.ceil(printSettings.scaleFactor) % 100;
-  // PrinterType enum from //printing/print_job_constants.h
-  printSettings.printerType = 2;
+  const { margins } = options;
+  if (margins !== undefined) {
+    if (typeof margins !== 'object') {
+      return Promise.reject(new Error('margins must be an Object'));
+    }
+
+    if (margins.top !== undefined) {
+      if (typeof margins.top !== 'number') {
+        return Promise.reject(new Error('margins.top must be a Number'));
+      }
+      printSettings.marginTop = margins.top;
+    }
+
+    if (margins.bottom !== undefined) {
+      if (typeof margins.bottom !== 'number') {
+        return Promise.reject(new Error('margins.bottom must be a Number'));
+      }
+      printSettings.marginBottom = margins.bottom;
+    }
+
+    if (margins.left !== undefined) {
+      if (typeof margins.left !== 'number') {
+        return Promise.reject(new Error('margins.left must be a Number'));
+      }
+      printSettings.marginLeft = margins.left;
+    }
+
+    if (margins.right !== undefined) {
+      if (typeof margins.right !== 'number') {
+        return Promise.reject(new Error('margins.right must be a Number'));
+      }
+      printSettings.marginRight = margins.right;
+    }
+  }
+
+  if (options.pageRanges !== undefined) {
+    if (typeof options.pageRanges !== 'string') {
+      return Promise.reject(new Error('printBackground must be a String'));
+    }
+    printSettings.pageRanges = options.pageRanges;
+  }
+
+  if (options.headerTemplate !== undefined) {
+    if (typeof options.headerTemplate !== 'string') {
+      return Promise.reject(new Error('headerTemplate must be a String'));
+    }
+    printSettings.headerTemplate = options.headerTemplate;
+  }
+
+  if (options.footerTemplate !== undefined) {
+    if (typeof options.footerTemplate !== 'string') {
+      return Promise.reject(new Error('footerTemplate must be a String'));
+    }
+    printSettings.footerTemplate = options.footerTemplate;
+  }
+
+  if (options.preferCSSPageSize !== undefined) {
+    if (typeof options.preferCSSPageSize !== 'boolean') {
+      return Promise.reject(new Error('footerTemplate must be a String'));
+    }
+    printSettings.preferCSSPageSize = options.preferCSSPageSize;
+  }
+
   if (this._printToPDF) {
     if (pendingPromise) {
       pendingPromise = pendingPromise.then(() => this._printToPDF(printSettings));
@@ -504,6 +482,7 @@ WebContents.prototype._callWindowOpenHandler = function (event: Electron.Event,
   if (!this._windowOpenHandler) {
     return defaultResponse;
   }
+
   const response = this._windowOpenHandler(details);
 
   if (typeof response !== 'object') {
@@ -666,7 +645,15 @@ WebContents.prototype._init = function () {
         postBody,
         disposition
       };
-      const result = this._callWindowOpenHandler(event, details);
+
+      let result: ReturnType<typeof this._callWindowOpenHandler>;
+      try {
+        result = this._callWindowOpenHandler(event, details);
+      } catch (err) {
+        event.preventDefault();
+        throw err;
+      }
+
       const options = result.browserWindowConstructorOptions;
       if (!event.defaultPrevented) {
         openGuestWindow({
@@ -697,7 +684,15 @@ WebContents.prototype._init = function () {
         referrer,
         postBody
       };
-      const result = this._callWindowOpenHandler(event, details);
+
+      let result: ReturnType<typeof this._callWindowOpenHandler>;
+      try {
+        result = this._callWindowOpenHandler(event, details);
+      } catch (err) {
+        event.preventDefault();
+        throw err;
+      }
+
       windowOpenOutlivesOpenerOption = result.outlivesOpener;
       windowOpenOverriddenOptions = result.browserWindowConstructorOptions;
       if (!event.defaultPrevented) {

lib/browser/guest-window-manager.ts

@@ -5,7 +5,7 @@
  * out-of-process (cross-origin) are created here. "Embedder" roughly means
  * "parent."
  */
-import { BrowserWindow } from 'electron/main';
+import { BrowserWindow, deprecate } from 'electron/main';
 import type { BrowserWindowConstructorOptions, Referrer, WebContents, LoadURLOptions } from 'electron/main';
 import { parseFeatures } from '@electron/internal/browser/parse-features-string';
 
@@ -155,6 +155,10 @@ function emitDeprecatedNewWindowEvent ({ event, embedder, guest, windowOpenArgs,
     ...parseContentTypeFormat(postData)
   } : null;
 
+  if (embedder.listenerCount('new-window') > 0) {
+    deprecate.log('The new-window event is deprecated and will be removed. Please use contents.setWindowOpenHandler() instead.');
+  }
+
   embedder.emit(
     'new-window',
     event,

lib/browser/rpc-server.ts

@@ -68,6 +68,10 @@ ipcMainUtils.handleSync(IPC_MESSAGES.BROWSER_SANDBOX_LOAD, async function (event
   };
 });
 
+ipcMainUtils.handleSync(IPC_MESSAGES.BROWSER_NONSANDBOX_LOAD, function (event) {
+  return { preloadPaths: event.sender._getPreloadPaths() };
+});
+
 ipcMainInternal.on(IPC_MESSAGES.BROWSER_PRELOAD_ERROR, function (event, preloadPath: string, error: Error) {
   event.sender.emit('preload-error', event, preloadPath, error);
 });

lib/common/ipc-messages.ts

@@ -3,6 +3,7 @@ export const enum IPC_MESSAGES {
   BROWSER_GET_LAST_WEB_PREFERENCES = 'BROWSER_GET_LAST_WEB_PREFERENCES',
   BROWSER_PRELOAD_ERROR = 'BROWSER_PRELOAD_ERROR',
   BROWSER_SANDBOX_LOAD = 'BROWSER_SANDBOX_LOAD',
+  BROWSER_NONSANDBOX_LOAD = 'BROWSER_NONSANDBOX_LOAD',
   BROWSER_WINDOW_CLOSE = 'BROWSER_WINDOW_CLOSE',
   BROWSER_GET_PROCESS_MEMORY_INFO = 'BROWSER_GET_PROCESS_MEMORY_INFO',
 

lib/renderer/init.ts

@@ -2,6 +2,7 @@ import * as path from 'path';
 import { IPC_MESSAGES } from '@electron/internal/common/ipc-messages';
 
 import type * as ipcRendererInternalModule from '@electron/internal/renderer/ipc-renderer-internal';
+import type * as ipcRendererUtilsModule from '@electron/internal/renderer/ipc-renderer-internal-utils';
 
 const Module = require('module');
 
@@ -38,6 +39,7 @@ require('../common/reset-search-paths');
 require('@electron/internal/common/init');
 
 const { ipcRendererInternal } = require('@electron/internal/renderer/ipc-renderer-internal') as typeof ipcRendererInternalModule;
+const ipcRendererUtils = require('@electron/internal/renderer/ipc-renderer-internal-utils') as typeof ipcRendererUtilsModule;
 
 process.getProcessMemoryInfo = () => {
   return ipcRendererInternal.invoke<Electron.ProcessMemoryInfo>(IPC_MESSAGES.BROWSER_GET_PROCESS_MEMORY_INFO);
@@ -48,15 +50,8 @@ const { hasSwitch, getSwitchValue } = process._linkedBinding('electron_common_co
 const { mainFrame } = process._linkedBinding('electron_renderer_web_frame');
 
 const nodeIntegration = mainFrame.getWebPreference('nodeIntegration');
-const preloadScript = mainFrame.getWebPreference('preload');
-const preloadScripts = mainFrame.getWebPreference('preloadScripts');
 const appPath = hasSwitch('app-path') ? getSwitchValue('app-path') : null;
 
-// The webContents preload script is loaded after the session preload scripts.
-if (preloadScript) {
-  preloadScripts.push(preloadScript);
-}
-
 // Common renderer initialization
 require('@electron/internal/renderer/common-init');
 
@@ -127,8 +122,9 @@ if (nodeIntegration) {
   }
 }
 
+const { preloadPaths } = ipcRendererUtils.invokeSync(IPC_MESSAGES.BROWSER_NONSANDBOX_LOAD);
 // Load the preload scripts.
-for (const preloadScript of preloadScripts) {
+for (const preloadScript of preloadPaths) {
   try {
     Module._load(preloadScript);
   } catch (error) {

lib/renderer/security-warnings.ts

@@ -1,7 +1,8 @@
-import { webFrame } from 'electron';
 import { ipcRendererInternal } from '@electron/internal/renderer/ipc-renderer-internal';
 import { IPC_MESSAGES } from '@electron/internal/common/ipc-messages';
 
+const { mainFrame: webFrame } = process._linkedBinding('electron_renderer_web_frame');
+
 let shouldLog: boolean | null = null;
 
 const { platform, execPath, env } = process;

lib/renderer/web-view/guest-view-internal.ts

@@ -9,10 +9,6 @@ export interface GuestViewDelegate {
   reset(): void;
 }
 
-const DEPRECATED_EVENTS: Record<string, string> = {
-  'page-title-updated': 'page-title-set'
-} as const;
-
 export function registerEvents (viewInstanceId: number, delegate: GuestViewDelegate) {
   ipcRendererInternal.on(`${IPC_MESSAGES.GUEST_VIEW_INTERNAL_DESTROY_GUEST}-${viewInstanceId}`, function () {
     delegate.reset();
@@ -20,10 +16,6 @@ export function registerEvents (viewInstanceId: number, delegate: GuestViewDeleg
   });
 
   ipcRendererInternal.on(`${IPC_MESSAGES.GUEST_VIEW_INTERNAL_DISPATCH_EVENT}-${viewInstanceId}`, function (event, eventName, props) {
-    if (DEPRECATED_EVENTS[eventName] != null) {
-      delegate.dispatchEvent(DEPRECATED_EVENTS[eventName], props);
-    }
-
     delegate.dispatchEvent(eventName, props);
   });
 }

package.json

@@ -1,6 +1,6 @@
 {
   "name": "electron",
-  "version": "20.0.0-nightly.20220524",
+  "version": "21.0.0-nightly.20220630",
   "repository": "https://github.com/electron/electron",
   "description": "Build cross platform desktop apps with JavaScript, HTML, and CSS",
   "devDependencies": {
@@ -47,8 +47,8 @@
     "express": "^4.16.4",
     "folder-hash": "^2.1.1",
     "fs-extra": "^9.0.1",
-    "got": "^6.3.0",
-    "husky": "^6.0.0",
+    "got": "^11.8.5",
+    "husky": "^8.0.1",
     "klaw": "^3.0.0",
     "lint": "^1.1.2",
     "lint-staged": "^10.2.11",
@@ -77,7 +77,7 @@
   "scripts": {
     "asar": "asar",
     "generate-version-json": "node script/generate-version-json.js",
-    "lint": "node ./script/lint.js && npm run lint:clang-format && npm run lint:docs",
+    "lint": "node ./script/lint.js && npm run lint:docs",
     "lint:js": "node ./script/lint.js --js",
     "lint:clang-format": "python3 script/run-clang-format.py -r -c shell/ || (echo \"\\nCode not formatted correctly.\" && exit 1)",
     "lint:clang-tidy": "ts-node ./script/run-clang-tidy.ts",
@@ -94,6 +94,7 @@
     "gn-typescript-definitions": "npm run create-typescript-definitions && shx cp electron.d.ts",
     "pre-flight": "pre-flight",
     "gn-check": "node ./script/gn-check.js",
+    "gn-format": "python3 script/run-gn-format.py",
     "precommit": "lint-staged",
     "preinstall": "node -e 'process.exit(0)'",
     "prepack": "check-for-leaks",
@@ -124,7 +125,7 @@
     ],
     "*.{gn,gni}": [
       "npm run gn-check",
-      "python3 script/run-gn-format.py"
+      "npm run gn-format"
     ],
     "*.py": [
       "node script/lint.js --py --fix --only --"

patches/boringssl/expose_aes-cfb.patch

@@ -58,10 +58,10 @@ index 852b76bea69988e0b3ac76a17b603128f239dde0..d443f4dc2daea0b7aa86ae75d31d995f
    callback(EVP_aes_192_ctr(), "aes-192-ctr", NULL, arg);
    callback(EVP_aes_256_ctr(), "aes-256-ctr", NULL, arg);
 diff --git a/include/openssl/cipher.h b/include/openssl/cipher.h
-index 2458847e5640fe955a9971aa77c27251e5091db5..a0b3ac5f6b55921a542f27108beca93d6372c6fc 100644
+index 380d25d9c2a8efb0636db5749a8e3b1ba6908ad5..7a5aa1c142e15cf06e63882e83d82a93c0d38785 100644
 --- a/include/openssl/cipher.h
 +++ b/include/openssl/cipher.h
-@@ -448,6 +448,7 @@ OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_ecb(void);
+@@ -460,6 +460,7 @@ OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_ecb(void);
  
  // EVP_aes_128_cfb128 is only available in decrepit.
  OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb128(void);

patches/chromium/.patches

@@ -75,7 +75,6 @@ skip_atk_toolchain_check.patch
 worker_feat_add_hook_to_notify_script_ready.patch
 chore_provide_iswebcontentscreationoverridden_with_full_params.patch
 fix_properly_honor_printing_page_ranges.patch
-chore_expose_v8_initialization_isolate_callbacks.patch
 export_gin_v8platform_pageallocator_for_usage_outside_of_the_gin.patch
 fix_export_zlib_symbols.patch
 don_t_use_potentially_null_getwebframe_-_view_when_get_blink.patch
@@ -110,3 +109,7 @@ introduce_ozoneplatform_electron_can_call_x11_property.patch
 make_gtk_getlibgtk_public.patch
 build_disable_print_content_analysis.patch
 custom_protocols_plzserviceworker.patch
+feat_filter_out_non-shareable_windows_in_the_current_application_in.patch
+fix_allow_guest_webcontents_to_enter_fullscreen.patch
+posix_replace_doubleforkandexec_with_forkandspawn.patch
+disable_freezing_flags_after_init_in_node.patch

patches/chromium/accelerator.patch

@@ -10,7 +10,7 @@ This patch makes three changes to Accelerator::GetShortcutText to improve shortc
 3. Ctrl-Shift-= and Ctrl-Plus show up as such
 
 diff --git a/ui/base/accelerators/accelerator.cc b/ui/base/accelerators/accelerator.cc
-index 783202623cc15168c726180fe232751551c43798..7cf5449a61a31bebbaffd920129daf1866211d7c 100644
+index 9fca6ff3e62204095ff0edc6fafce3a61cd2ff5c..089f8b818018a600cc8c90811f09374a1f702d8b 100644
 --- a/ui/base/accelerators/accelerator.cc
 +++ b/ui/base/accelerators/accelerator.cc
 @@ -11,6 +11,7 @@
@@ -44,7 +44,7 @@ index 783202623cc15168c726180fe232751551c43798..7cf5449a61a31bebbaffd920129daf18
    }
  
  #if BUILDFLAG(IS_MAC)
-@@ -451,7 +461,7 @@ std::u16string Accelerator::ApplyLongFormModifiers(
+@@ -447,7 +457,7 @@ std::u16string Accelerator::ApplyLongFormModifiers(
      const std::u16string& shortcut) const {
    std::u16string result = shortcut;
  
@@ -53,7 +53,7 @@ index 783202623cc15168c726180fe232751551c43798..7cf5449a61a31bebbaffd920129daf18
      result = ApplyModifierToAcceleratorString(result, IDS_APP_SHIFT_KEY);
  
    // Note that we use 'else-if' in order to avoid using Ctrl+Alt as a shortcut.
-@@ -459,7 +469,7 @@ std::u16string Accelerator::ApplyLongFormModifiers(
+@@ -455,7 +465,7 @@ std::u16string Accelerator::ApplyLongFormModifiers(
    // more information.
    if (IsCtrlDown())
      result = ApplyModifierToAcceleratorString(result, IDS_APP_CTRL_KEY);

patches/chromium/add_contentgpuclient_precreatemessageloop_callback.patch

@@ -10,10 +10,10 @@ Allows Electron to restore WER when ELECTRON_DEFAULT_ERROR_MODE is set.
 This should be upstreamed.
 
 diff --git a/content/gpu/gpu_main.cc b/content/gpu/gpu_main.cc
-index e0ff6fae1e96699e7cb54c9e82a3c68a8e95602b..2179a906bb6c93fbfaa8e7b7e64fddfaab034e94 100644
+index b017e2bf97a4a15cb7af384d9b4e54aa729a997c..fc59b7040bf68e90fbbe516b5321a519a5e77b2a 100644
 --- a/content/gpu/gpu_main.cc
 +++ b/content/gpu/gpu_main.cc
-@@ -241,6 +241,10 @@ int GpuMain(MainFunctionParams parameters) {
+@@ -239,6 +239,10 @@ int GpuMain(MainFunctionParams parameters) {
    // to the GpuProcessHost once the GpuServiceImpl has started.
    viz::GpuServiceImpl::InstallPreInitializeLogHandler();
  
@@ -24,9 +24,9 @@ index e0ff6fae1e96699e7cb54c9e82a3c68a8e95602b..2179a906bb6c93fbfaa8e7b7e64fddfa
    // We are experiencing what appear to be memory-stomp issues in the GPU
    // process. These issues seem to be impacting the task executor and listeners
    // registered to it. Create the task executor on the heap to guard against
-@@ -347,7 +351,6 @@ int GpuMain(MainFunctionParams parameters) {
-   GpuProcess gpu_process(io_thread_priority);
- #endif
+@@ -344,7 +348,6 @@ int GpuMain(MainFunctionParams parameters) {
+   ChildProcess gpu_process(io_thread_priority);
+   DCHECK(base::ThreadPoolInstance::Get()->WasStarted());
  
 -  auto* client = GetContentClient()->gpu();
    if (client)

patches/chromium/add_didinstallconditionalfeatures.patch

@@ -10,10 +10,10 @@ DidCreateScriptContext is called, not all JS APIs are available in the
 context, which can cause some preload scripts to trip.
 
 diff --git a/content/public/renderer/render_frame_observer.h b/content/public/renderer/render_frame_observer.h
-index eb6f4c87c4479d5f4fb8e3f85a231fb9cc744a63..11298b413021b4d438195482db253a93356b2862 100644
+index 5a7d3da58451f491ed6dfabd3bc31a645843bb60..36cbf8c5c01330acc8b3a708bd6481ede21d73be 100644
 --- a/content/public/renderer/render_frame_observer.h
 +++ b/content/public/renderer/render_frame_observer.h
-@@ -132,6 +132,8 @@ class CONTENT_EXPORT RenderFrameObserver : public IPC::Listener,
+@@ -136,6 +136,8 @@ class CONTENT_EXPORT RenderFrameObserver : public IPC::Listener,
    virtual void DidHandleOnloadEvents() {}
    virtual void DidCreateScriptContext(v8::Local<v8::Context> context,
                                        int32_t world_id) {}
@@ -23,10 +23,10 @@ index eb6f4c87c4479d5f4fb8e3f85a231fb9cc744a63..11298b413021b4d438195482db253a93
                                          int32_t world_id) {}
    virtual void DidClearWindowObject() {}
 diff --git a/content/renderer/render_frame_impl.cc b/content/renderer/render_frame_impl.cc
-index abcd95ad39d8d66e1a7149e89bc6bfe2a8197d19..1b021461f214287c94fb22b17d980c19e3f07dde 100644
+index f479e7ce6ceb21e67f72dd29589dfda180e438b0..23dcc6507ed9151f657689904bf90d3b2e8ae3d3 100644
 --- a/content/renderer/render_frame_impl.cc
 +++ b/content/renderer/render_frame_impl.cc
-@@ -4489,6 +4489,12 @@ void RenderFrameImpl::DidCreateScriptContext(v8::Local<v8::Context> context,
+@@ -4474,6 +4474,12 @@ void RenderFrameImpl::DidCreateScriptContext(v8::Local<v8::Context> context,
      observer.DidCreateScriptContext(context, world_id);
  }
  
@@ -40,10 +40,10 @@ index abcd95ad39d8d66e1a7149e89bc6bfe2a8197d19..1b021461f214287c94fb22b17d980c19
                                                 int world_id) {
    for (auto& observer : observers_)
 diff --git a/content/renderer/render_frame_impl.h b/content/renderer/render_frame_impl.h
-index d8ffccc148622d4eb0388e03c78ff1def4290701..5a3162cc88e5a48b04fbbb74a5c2ba4b7dd8a5d3 100644
+index ac30039d95f1f4c73067df58d8af63190b352030..c674c87797fc8ea057f5b94aabbb53b92bded031 100644
 --- a/content/renderer/render_frame_impl.h
 +++ b/content/renderer/render_frame_impl.h
-@@ -599,6 +599,8 @@ class CONTENT_EXPORT RenderFrameImpl
+@@ -609,6 +609,8 @@ class CONTENT_EXPORT RenderFrameImpl
                            uint32_t ng_call_count) override;
    void DidCreateScriptContext(v8::Local<v8::Context> context,
                                int world_id) override;
@@ -53,10 +53,10 @@ index d8ffccc148622d4eb0388e03c78ff1def4290701..5a3162cc88e5a48b04fbbb74a5c2ba4b
                                  int world_id) override;
    void DidChangeScrollOffset() override;
 diff --git a/third_party/blink/public/web/web_local_frame_client.h b/third_party/blink/public/web/web_local_frame_client.h
-index 5adee94f81c0e98db976ac1c6c55fb5eab8c2e65..9d3e43f4394ad9a4377b47a001c4baf4027cbe7c 100644
+index 9e2dc9b2ea07a1f9bdfd92284f73dd1977ea1437..18c07f44196e83cf16cace6863e3db368a86ce0d 100644
 --- a/third_party/blink/public/web/web_local_frame_client.h
 +++ b/third_party/blink/public/web/web_local_frame_client.h
-@@ -584,6 +584,9 @@ class BLINK_EXPORT WebLocalFrameClient {
+@@ -605,6 +605,9 @@ class BLINK_EXPORT WebLocalFrameClient {
    virtual void DidCreateScriptContext(v8::Local<v8::Context>,
                                        int32_t world_id) {}
  
@@ -79,10 +79,10 @@ index a6ba8411384855c82712960375bc949c5c2bd522..fc86ca807c9c1bda9236160580b09415
    if (World().IsMainWorld()) {
      GetFrame()->Loader().DispatchDidClearWindowObjectInMainWorld();
 diff --git a/third_party/blink/renderer/core/frame/local_frame_client.h b/third_party/blink/renderer/core/frame/local_frame_client.h
-index 810726792cba326f66df5a8d0d833eaee4975594..635fb45b0a9d1716bd45d8b6c5dbc5f9fbf0ffa8 100644
+index 27b366933ce11a029920b9f85060f8cce8deaacd..110996a9d55c1ba779e8aff598e9847dd6a38d86 100644
 --- a/third_party/blink/renderer/core/frame/local_frame_client.h
 +++ b/third_party/blink/renderer/core/frame/local_frame_client.h
-@@ -298,6 +298,8 @@ class CORE_EXPORT LocalFrameClient : public FrameClient {
+@@ -301,6 +301,8 @@ class CORE_EXPORT LocalFrameClient : public FrameClient {
  
    virtual void DidCreateScriptContext(v8::Local<v8::Context>,
                                        int32_t world_id) = 0;
@@ -92,7 +92,7 @@ index 810726792cba326f66df5a8d0d833eaee4975594..635fb45b0a9d1716bd45d8b6c5dbc5f9
                                          int32_t world_id) = 0;
    virtual bool AllowScriptExtensions() = 0;
 diff --git a/third_party/blink/renderer/core/frame/local_frame_client_impl.cc b/third_party/blink/renderer/core/frame/local_frame_client_impl.cc
-index 772748673a5854349ba2be28abe21b7ff3f8541f..b3ebd622a61187f718ca16ac8cfeb189d35584d2 100644
+index 7cbb31ddff83ea89ae879dfe190b62a8cdbeb7cf..ebc2f572b3340b7ca8719073afda8d266b18cbe5 100644
 --- a/third_party/blink/renderer/core/frame/local_frame_client_impl.cc
 +++ b/third_party/blink/renderer/core/frame/local_frame_client_impl.cc
 @@ -273,6 +273,13 @@ void LocalFrameClientImpl::DidCreateScriptContext(
@@ -110,7 +110,7 @@ index 772748673a5854349ba2be28abe21b7ff3f8541f..b3ebd622a61187f718ca16ac8cfeb189
      v8::Local<v8::Context> context,
      int32_t world_id) {
 diff --git a/third_party/blink/renderer/core/frame/local_frame_client_impl.h b/third_party/blink/renderer/core/frame/local_frame_client_impl.h
-index 200f0c57df1f15428b45a228adfee8fd5465ecbf..ec8cad0a94b31561096fdaba1a75fb54c96d3f7e 100644
+index c95ef4a4a3f9d40e0e4bedf6fc42225190626c42..36cc932782437b9f5d301416f5a4e8f48c3c837a 100644
 --- a/third_party/blink/renderer/core/frame/local_frame_client_impl.h
 +++ b/third_party/blink/renderer/core/frame/local_frame_client_impl.h
 @@ -80,6 +80,8 @@ class CORE_EXPORT LocalFrameClientImpl final : public LocalFrameClient {
@@ -123,7 +123,7 @@ index 200f0c57df1f15428b45a228adfee8fd5465ecbf..ec8cad0a94b31561096fdaba1a75fb54
                                  int32_t world_id) override;
  
 diff --git a/third_party/blink/renderer/core/loader/empty_clients.h b/third_party/blink/renderer/core/loader/empty_clients.h
-index acd3b33c64f1534555c14047e29c18f31a1e8f92..63a9e0695efb0f357c0c3298175da9bbdc78a41c 100644
+index d1e2d799602ce3b671e7e33afc57923fcc066f00..64dc35a4ba05521dc55b69d2413010ae47b10152 100644
 --- a/third_party/blink/renderer/core/loader/empty_clients.h
 +++ b/third_party/blink/renderer/core/loader/empty_clients.h
 @@ -352,6 +352,8 @@ class CORE_EXPORT EmptyLocalFrameClient : public LocalFrameClient {

patches/chromium/allow_disabling_blink_scheduler_throttling_per_renderview.patch

@@ -6,10 +6,10 @@ Subject: allow disabling blink scheduler throttling per RenderView
 This allows us to disable throttling for hidden windows.
 
 diff --git a/content/browser/renderer_host/render_view_host_impl.cc b/content/browser/renderer_host/render_view_host_impl.cc
-index f19a15f85afe2d754833667d8c272c75da3de0b2..18de1a2533b479a6090ed412987f0b5c3922c711 100644
+index 1f6d9be10432416f591a616805494b5d78975df1..e73f70c62ac2e69c918bdf39bd53f74a47066f4e 100644
 --- a/content/browser/renderer_host/render_view_host_impl.cc
 +++ b/content/browser/renderer_host/render_view_host_impl.cc
-@@ -661,6 +661,11 @@ void RenderViewHostImpl::SetBackgroundOpaque(bool opaque) {
+@@ -665,6 +665,11 @@ void RenderViewHostImpl::SetBackgroundOpaque(bool opaque) {
    GetWidget()->GetAssociatedFrameWidget()->SetBackgroundOpaque(opaque);
  }
  
@@ -22,10 +22,10 @@ index f19a15f85afe2d754833667d8c272c75da3de0b2..18de1a2533b479a6090ed412987f0b5c
    return is_active();
  }
 diff --git a/content/browser/renderer_host/render_view_host_impl.h b/content/browser/renderer_host/render_view_host_impl.h
-index 64f6ebe2a86a659da70f32cdbdb961384adca43f..2fc1062eb798a233f0eede6dd945f25d633e5f8f 100644
+index 3ccc771a82992ae70c770fa6d2dde92904aa17db..505091e9006f7d41fa8d02e603afef1d10b35bf4 100644
 --- a/content/browser/renderer_host/render_view_host_impl.h
 +++ b/content/browser/renderer_host/render_view_host_impl.h
-@@ -136,6 +136,7 @@ class CONTENT_EXPORT RenderViewHostImpl
+@@ -138,6 +138,7 @@ class CONTENT_EXPORT RenderViewHostImpl
    void EnablePreferredSizeMode() override;
    void WriteIntoTrace(perfetto::TracedProto<TraceProto> context) const override;
  
@@ -48,7 +48,7 @@ index 4d2a4c6746e1dbfc619faf2e16eaa4948d74e372..6c9f190ff595234eca18ff20ca0655da
    // This interface should only be implemented inside content.
    friend class RenderViewHostImpl;
 diff --git a/content/renderer/render_view_impl.h b/content/renderer/render_view_impl.h
-index fd145f0aa562d6b63fb1d3a8a9241ae1aa1ce7a0..54d30fb9db8b48b94abdb815c487f618f9bb6525 100644
+index 99978b33c294ebe37192baccb29f0a34a25aed17..ef6e9ae24979538b8746aca898d1f302827491d8 100644
 --- a/content/renderer/render_view_impl.h
 +++ b/content/renderer/render_view_impl.h
 @@ -151,6 +151,8 @@ class CONTENT_EXPORT RenderViewImpl : public blink::WebViewClient,
@@ -85,10 +85,10 @@ index 5e4032ccf916f969cd669af7d983becddb57c72b..a858c9f2fa609ae756a2e70d0362f2de
    // Visibility -----------------------------------------------------------
  
 diff --git a/third_party/blink/renderer/core/exported/web_view_impl.cc b/third_party/blink/renderer/core/exported/web_view_impl.cc
-index 9704d8d8a4ee9e36c1a61c6723ce1039320014b6..cd14dd54e3c7bb56e82cbd6c566c11018b4deb94 100644
+index deeeab3e6ead93cb3be26f4b40caeeef8bfaafa5..98c257b43cf198481bcaa8f080add28e60e7d9a2 100644
 --- a/third_party/blink/renderer/core/exported/web_view_impl.cc
 +++ b/third_party/blink/renderer/core/exported/web_view_impl.cc
-@@ -3698,6 +3698,13 @@ PageScheduler* WebViewImpl::Scheduler() const {
+@@ -3732,6 +3732,13 @@ PageScheduler* WebViewImpl::Scheduler() const {
    return GetPage()->GetPageScheduler();
  }
  
@@ -102,7 +102,7 @@ index 9704d8d8a4ee9e36c1a61c6723ce1039320014b6..cd14dd54e3c7bb56e82cbd6c566c1101
  void WebViewImpl::SetVisibilityState(
      mojom::blink::PageVisibilityState visibility_state,
      bool is_initial_state) {
-@@ -3709,7 +3716,8 @@ void WebViewImpl::SetVisibilityState(
+@@ -3743,7 +3750,8 @@ void WebViewImpl::SetVisibilityState(
    }
    GetPage()->SetVisibilityState(visibility_state, is_initial_state);
    GetPage()->GetPageScheduler()->SetPageVisible(
@@ -113,10 +113,10 @@ index 9704d8d8a4ee9e36c1a61c6723ce1039320014b6..cd14dd54e3c7bb56e82cbd6c566c1101
  
  mojom::blink::PageVisibilityState WebViewImpl::GetVisibilityState() {
 diff --git a/third_party/blink/renderer/core/exported/web_view_impl.h b/third_party/blink/renderer/core/exported/web_view_impl.h
-index 51ab4f029e467fa5ea2663af38445d9565e19fe4..18005ca7a272d7731a4b8eeeac92ce163c2a262e 100644
+index 2f8e971ab224b36c6e464eb7524dd3d4c6b76f8c..4a9664d0ce5de431d9638e4145a21091cea78fd1 100644
 --- a/third_party/blink/renderer/core/exported/web_view_impl.h
 +++ b/third_party/blink/renderer/core/exported/web_view_impl.h
-@@ -419,6 +419,7 @@ class CORE_EXPORT WebViewImpl final : public WebView,
+@@ -418,6 +418,7 @@ class CORE_EXPORT WebViewImpl final : public WebView,
    LocalDOMWindow* PagePopupWindow() const;
  
    PageScheduler* Scheduler() const override;
@@ -124,7 +124,7 @@ index 51ab4f029e467fa5ea2663af38445d9565e19fe4..18005ca7a272d7731a4b8eeeac92ce16
    void SetVisibilityState(mojom::blink::PageVisibilityState visibility_state,
                            bool is_initial_state) override;
    mojom::blink::PageVisibilityState GetVisibilityState() override;
-@@ -854,6 +855,8 @@ class CORE_EXPORT WebViewImpl final : public WebView,
+@@ -865,6 +866,8 @@ class CORE_EXPORT WebViewImpl final : public WebView,
    // If true, we send IPC messages when |preferred_size_| changes.
    bool send_preferred_size_changes_ = false;
  

patches/chromium/allow_in-process_windows_to_have_different_web_prefs.patch

@@ -8,10 +8,10 @@ WebPreferences of in-process child windows, rather than relying on
 process-level command line switches, as before.
 
 diff --git a/third_party/blink/common/web_preferences/web_preferences.cc b/third_party/blink/common/web_preferences/web_preferences.cc
-index 6d51f6a77c21b60ab756dbf8d4961b351a2e2b07..c6dc3cebfb32489a5e50b850ed02a066bf3f258e 100644
+index 6d51f6a77c21b60ab756dbf8d4961b351a2e2b07..26b820b3ce387e01900cec4227ff290113a833c3 100644
 --- a/third_party/blink/common/web_preferences/web_preferences.cc
 +++ b/third_party/blink/common/web_preferences/web_preferences.cc
-@@ -142,6 +142,20 @@ WebPreferences::WebPreferences()
+@@ -142,6 +142,19 @@ WebPreferences::WebPreferences()
        fake_no_alloc_direct_call_for_testing_enabled(false),
        v8_cache_options(blink::mojom::V8CacheOptions::kDefault),
        record_whole_document(false),
@@ -20,7 +20,6 @@ index 6d51f6a77c21b60ab756dbf8d4961b351a2e2b07..c6dc3cebfb32489a5e50b850ed02a066
 +      is_webview(false),
 +      hidden_page(false),
 +      offscreen(false),
-+      preload(base::FilePath::StringType()),
 +      node_integration(false),
 +      node_integration_in_worker(false),
 +      node_integration_in_sub_frames(false),
@@ -33,21 +32,10 @@ index 6d51f6a77c21b60ab756dbf8d4961b351a2e2b07..c6dc3cebfb32489a5e50b850ed02a066
        accelerated_video_decode_enabled(false),
        animation_policy(
 diff --git a/third_party/blink/common/web_preferences/web_preferences_mojom_traits.cc b/third_party/blink/common/web_preferences/web_preferences_mojom_traits.cc
-index 187fd8d9818693262256d5cbddd5e02659ba903d..f166517f4e70ced310253539fb6197f6b3af559c 100644
+index 187fd8d9818693262256d5cbddd5e02659ba903d..28e5178361e03d1ac851fa74214931b2332dd9c2 100644
 --- a/third_party/blink/common/web_preferences/web_preferences_mojom_traits.cc
 +++ b/third_party/blink/common/web_preferences/web_preferences_mojom_traits.cc
-@@ -23,6 +23,10 @@ bool StructTraits<blink::mojom::WebPreferencesDataView,
-       !data.ReadCursiveFontFamilyMap(&out->cursive_font_family_map) ||
-       !data.ReadFantasyFontFamilyMap(&out->fantasy_font_family_map) ||
-       !data.ReadMathFontFamilyMap(&out->math_font_family_map) ||
-+      // Begin Electron-specific WebPreferences.
-+      !data.ReadPreloads(&out->preloads) ||
-+      !data.ReadPreload(&out->preload) ||
-+      // End Electron-specific WebPreferences.
-       !data.ReadLazyFrameLoadingDistanceThresholdsPx(
-           &out->lazy_frame_loading_distance_thresholds_px) ||
-       !data.ReadLazyImageLoadingDistanceThresholdsPx(
-@@ -148,6 +152,19 @@ bool StructTraits<blink::mojom::WebPreferencesDataView,
+@@ -148,6 +148,19 @@ bool StructTraits<blink::mojom::WebPreferencesDataView,
        data.fake_no_alloc_direct_call_for_testing_enabled();
    out->v8_cache_options = data.v8_cache_options();
    out->record_whole_document = data.record_whole_document();
@@ -68,7 +56,7 @@ index 187fd8d9818693262256d5cbddd5e02659ba903d..f166517f4e70ced310253539fb6197f6
    out->accelerated_video_decode_enabled =
        data.accelerated_video_decode_enabled();
 diff --git a/third_party/blink/public/common/web_preferences/web_preferences.h b/third_party/blink/public/common/web_preferences/web_preferences.h
-index 59947bfd3c042e5f7d3993967fece9b519f93472..368ec7fb398409cd6386269934eaffcce356793f 100644
+index 59947bfd3c042e5f7d3993967fece9b519f93472..cb2a53f6147767394585ed371744d8a140aace71 100644
 --- a/third_party/blink/public/common/web_preferences/web_preferences.h
 +++ b/third_party/blink/public/common/web_preferences/web_preferences.h
 @@ -10,6 +10,7 @@
@@ -79,17 +67,15 @@ index 59947bfd3c042e5f7d3993967fece9b519f93472..368ec7fb398409cd6386269934eaffcc
  #include "net/nqe/effective_connection_type.h"
  #include "third_party/blink/public/common/common_export.h"
  #include "third_party/blink/public/mojom/css/preferred_color_scheme.mojom-shared.h"
-@@ -154,6 +155,22 @@ struct BLINK_COMMON_EXPORT WebPreferences {
+@@ -154,6 +155,20 @@ struct BLINK_COMMON_EXPORT WebPreferences {
    blink::mojom::V8CacheOptions v8_cache_options;
    bool record_whole_document;
  
 +  // Begin Electron-specific WebPreferences.
-+  std::vector<base::FilePath> preloads;
 +  bool context_isolation;
 +  bool is_webview;
 +  bool hidden_page;
 +  bool offscreen;
-+  base::FilePath preload;
 +  bool node_integration;
 +  bool node_integration_in_worker;
 +  bool node_integration_in_sub_frames;
@@ -103,7 +89,7 @@ index 59947bfd3c042e5f7d3993967fece9b519f93472..368ec7fb398409cd6386269934eaffcc
    // only controls whether or not the "document.cookie" field is properly
    // connected to the backing store, for instance if you wanted to be able to
 diff --git a/third_party/blink/public/common/web_preferences/web_preferences_mojom_traits.h b/third_party/blink/public/common/web_preferences/web_preferences_mojom_traits.h
-index bd425a5869477de9095c6a41c683609d065b08c0..3a5d7450aa40e8a7614e83f316d3d0fb59583381 100644
+index bd425a5869477de9095c6a41c683609d065b08c0..c7ba3ff52c9de01028c9e2be214e20cd91cbf309 100644
 --- a/third_party/blink/public/common/web_preferences/web_preferences_mojom_traits.h
 +++ b/third_party/blink/public/common/web_preferences/web_preferences_mojom_traits.h
 @@ -6,6 +6,7 @@
@@ -114,15 +100,11 @@ index bd425a5869477de9095c6a41c683609d065b08c0..3a5d7450aa40e8a7614e83f316d3d0fb
  #include "mojo/public/cpp/bindings/struct_traits.h"
  #include "net/nqe/effective_connection_type.h"
  #include "third_party/blink/public/common/common_export.h"
-@@ -428,6 +429,60 @@ struct BLINK_COMMON_EXPORT StructTraits<blink::mojom::WebPreferencesDataView,
+@@ -428,6 +429,52 @@ struct BLINK_COMMON_EXPORT StructTraits<blink::mojom::WebPreferencesDataView,
      return r.record_whole_document;
    }
  
 +  // Begin Electron-specific WebPreferences.
-+  static const std::vector<base::FilePath>& preloads(const blink::web_pref::WebPreferences& r) {
-+    return r.preloads;
-+  }
-+
 +  static bool context_isolation(const blink::web_pref::WebPreferences& r) {
 +    return r.context_isolation;
 +  }
@@ -139,10 +121,6 @@ index bd425a5869477de9095c6a41c683609d065b08c0..3a5d7450aa40e8a7614e83f316d3d0fb
 +    return r.offscreen;
 +  }
 +
-+  static const base::FilePath& preload(const blink::web_pref::WebPreferences& r) {
-+    return r.preload;
-+  }
-+
 +  static bool node_integration(const blink::web_pref::WebPreferences& r) {
 +    return r.node_integration;
 +  }
@@ -176,7 +154,7 @@ index bd425a5869477de9095c6a41c683609d065b08c0..3a5d7450aa40e8a7614e83f316d3d0fb
      return r.cookie_enabled;
    }
 diff --git a/third_party/blink/public/mojom/webpreferences/web_preferences.mojom b/third_party/blink/public/mojom/webpreferences/web_preferences.mojom
-index 738ac646e075f7a37ba2a263c7799a755e63d3fb..80d6ae17d34ef5c7fd14e21c4e1ee3ed4ef9c5fe 100644
+index 738ac646e075f7a37ba2a263c7799a755e63d3fb..40ab2a4b9a1f9de5f201502adebc166a48fccd35 100644
 --- a/third_party/blink/public/mojom/webpreferences/web_preferences.mojom
 +++ b/third_party/blink/public/mojom/webpreferences/web_preferences.mojom
 @@ -10,6 +10,7 @@ import "third_party/blink/public/mojom/v8_cache_options.mojom";
@@ -187,17 +165,15 @@ index 738ac646e075f7a37ba2a263c7799a755e63d3fb..80d6ae17d34ef5c7fd14e21c4e1ee3ed
  
  enum PointerType {
    kPointerNone                              = 1,             // 1 << 0
-@@ -206,6 +207,22 @@ struct WebPreferences {
+@@ -206,6 +207,20 @@ struct WebPreferences {
    V8CacheOptions v8_cache_options;
    bool record_whole_document;
  
 +  // Begin Electron-specific WebPreferences.
-+  array<mojo_base.mojom.FilePath> preloads;
 +  bool context_isolation;
 +  bool is_webview;
 +  bool hidden_page;
 +  bool offscreen;
-+  mojo_base.mojom.FilePath preload;
 +  bool node_integration;
 +  bool node_integration_in_worker;
 +  bool node_integration_in_sub_frames;

patches/chromium/allow_new_privileges_in_unsandboxed_child_processes.patch

@@ -6,7 +6,7 @@ Subject: allow new privileges in unsandboxed child processes
 This allows unsandboxed renderers to launch setuid processes on Linux.
 
 diff --git a/content/browser/child_process_launcher_helper_linux.cc b/content/browser/child_process_launcher_helper_linux.cc
-index 80db4cb5941ee84db1534c070c4daefef76d0faf..cf40ac56a9ce4bd4a28eb511b5f37d148e4be6ac 100644
+index 16d838b710d4f717733f4aa8f92f144922969b3b..ff2c78c7b803159dde97dafdb799d9b8761dc3fd 100644
 --- a/content/browser/child_process_launcher_helper_linux.cc
 +++ b/content/browser/child_process_launcher_helper_linux.cc
 @@ -54,6 +54,18 @@ bool ChildProcessLauncherHelper::BeforeLaunchOnLauncherThread(
@@ -27,4 +27,4 @@ index 80db4cb5941ee84db1534c070c4daefef76d0faf..cf40ac56a9ce4bd4a28eb511b5f37d14
 +    }
    }
  
-   options->environment = delegate_->GetEnvironment();
+   for (const auto& remapped_fd : file_data_->additional_remapped_fds) {

patches/chromium/blink_local_frame.patch

@@ -15,7 +15,7 @@ Refs changes in:
 This patch reverts the changes to fix associated crashes in Electron.
 
 diff --git a/third_party/blink/renderer/core/frame/frame.cc b/third_party/blink/renderer/core/frame/frame.cc
-index c136ea03ea961ce419d42c60efc646e4ddfe5693..4e635c3775df0f1b3b3d7551fba8f8d59d1b541b 100644
+index 80f4314d205f4cbf0d92a331062f8a01a46d6917..2e5c15fc2cf5d0db8d26c1eeb759f6d2837e0656 100644
 --- a/third_party/blink/renderer/core/frame/frame.cc
 +++ b/third_party/blink/renderer/core/frame/frame.cc
 @@ -123,14 +123,6 @@ bool Frame::Detach(FrameDetachType type) {
@@ -49,7 +49,7 @@ index c136ea03ea961ce419d42c60efc646e4ddfe5693..4e635c3775df0f1b3b3d7551fba8f8d5
    // its owning reference back to our owning LocalFrame.
    client_->Detached(type);
 diff --git a/third_party/blink/renderer/core/frame/local_frame.cc b/third_party/blink/renderer/core/frame/local_frame.cc
-index 019b87a77fb7306bacdcda20e388cdfb8d3a6be8..f972ae236566248d3179d147e9692322153e326d 100644
+index 9d8a9be49ed025439b9323fe4805191db1be6e6b..9c618930625dfd7ca44c2d5c1ca25db4d9f36052 100644
 --- a/third_party/blink/renderer/core/frame/local_frame.cc
 +++ b/third_party/blink/renderer/core/frame/local_frame.cc
 @@ -544,10 +544,6 @@ bool LocalFrame::DetachImpl(FrameDetachType type) {

patches/chromium/boringssl_build_gn.patch

@@ -6,7 +6,7 @@ Subject: boringssl BUILD.gn
 Build BoringSSL with some extra functions that nodejs needs.
 
 diff --git a/third_party/boringssl/BUILD.gn b/third_party/boringssl/BUILD.gn
-index f222ae94a5a10ced84e41ef84560af46a910577f..c18d26de9a63befca3c77fe5ecd93975a016797f 100644
+index efcbdf378b61af0a4b0f2cd784160d95439e84e1..fc6bba3fdd71ee40bb38f7d95a2f4dccd82d3e17 100644
 --- a/third_party/boringssl/BUILD.gn
 +++ b/third_party/boringssl/BUILD.gn
 @@ -44,6 +44,20 @@ config("no_asm_config") {

patches/chromium/breakpad_treat_node_processes_as_browser_processes.patch

@@ -10,7 +10,7 @@ breakpad independently, as a "browser" process. This patches
 crash annotation.
 
 diff --git a/components/crash/core/app/breakpad_linux.cc b/components/crash/core/app/breakpad_linux.cc
-index 3933fa761768b5a45891bfef4c2c2123b92fc276..2eb52b71d7ebc7525cceffbecc99db6751429afd 100644
+index b1f8fd4494e7f5deac078023c2e0240d701e1f13..a372e9bb12f9cec6235fe529d73b6e0009328038 100644
 --- a/components/crash/core/app/breakpad_linux.cc
 +++ b/components/crash/core/app/breakpad_linux.cc
 @@ -719,8 +719,13 @@ bool CrashDone(const MinidumpDescriptor& minidump,

patches/chromium/build_add_electron_tracing_category.patch

@@ -8,7 +8,7 @@ categories in use are known / declared.  This patch is required for us
 to introduce a new Electron category for Electron-specific tracing.
 
 diff --git a/base/trace_event/builtin_categories.h b/base/trace_event/builtin_categories.h
-index 7528d88c5d40571f1dcbd02201128ba2eed0cf08..ae50430c441539eb6152a926d382fb0552f3c358 100644
+index a1a93418b0b0d56f92647aa1087bb4485c354201..191bfe2d3922d2e65f0be10d6436c50efc3b0880 100644
 --- a/base/trace_event/builtin_categories.h
 +++ b/base/trace_event/builtin_categories.h
 @@ -80,6 +80,7 @@

patches/chromium/build_disable_partition_alloc_on_mac.patch

@@ -9,7 +9,7 @@ and can be removed when the crash in fork is resolved.
 Related issue: https://github.com/electron/electron/issues/32718
 
 diff --git a/base/allocator/allocator.gni b/base/allocator/allocator.gni
-index 97a57dfb1626ae9a781736dd8b0b55bf201162c1..5c97441faad781b459255cb1f7d0652ec86e40c8 100644
+index c3c62f83553bd0d258de4d5d9ecd8b02a74f594b..3dbf4462fa056db7a4084453ef35f1b944fbd093 100644
 --- a/base/allocator/allocator.gni
 +++ b/base/allocator/allocator.gni
 @@ -20,7 +20,7 @@ _disable_partition_alloc = is_component_build || (is_win && is_debug)

patches/chromium/build_disable_print_content_analysis.patch

@@ -13,7 +13,7 @@ This patch can be removed when enable_print_content_analysis can be more
 easily enabled or disabled by default with buildflags.
 
 diff --git a/printing/buildflags/buildflags.gni b/printing/buildflags/buildflags.gni
-index 559ac76d4e4b9d9c1824c4da186a6b0f7619fcca..72855e0c5fadb286b67144b34ff71f45e1434c73 100644
+index 1d2b24adbb39215531bbe189d6191dba026d4f68..88b7962836cfe93a59d1569245f4815f22be355e 100644
 --- a/printing/buildflags/buildflags.gni
 +++ b/printing/buildflags/buildflags.gni
 @@ -36,8 +36,7 @@ declare_args() {

patches/chromium/build_do_not_depend_on_packed_resource_integrity.patch

@@ -11,10 +11,10 @@ if we ever align our .pak file generation with Chrome we can remove this
 patch.
 
 diff --git a/chrome/BUILD.gn b/chrome/BUILD.gn
-index 99ab95668a7d3a31339b576b4a3a6038f39c2795..92f43eac6d654ff8ebe57d291c4f77aa1b029895 100644
+index 672bc56194e1ad8b03acd639c17b7f7e67a5dba0..59ba25815e511af5ca6aca5467cc91d5cc3c6bf1 100644
 --- a/chrome/BUILD.gn
 +++ b/chrome/BUILD.gn
-@@ -173,11 +173,16 @@ if (!is_android && !is_mac) {
+@@ -175,11 +175,16 @@ if (!is_android && !is_mac) {
          "common/crash_keys.h",
        ]
  
@@ -33,10 +33,10 @@ index 99ab95668a7d3a31339b576b4a3a6038f39c2795..92f43eac6d654ff8ebe57d291c4f77aa
          "//base",
          "//build:branding_buildflags",
 diff --git a/chrome/browser/BUILD.gn b/chrome/browser/BUILD.gn
-index cb28e691fb863fe7739a7ca536170e6c7a76a315..eacc853e2b9fc3c9e448f419e02d7378da310e9e 100644
+index 46197c5a6423f3278b75549d601421d2b5e139d6..b02779a76a238fd713796597bec8a82897e88f51 100644
 --- a/chrome/browser/BUILD.gn
 +++ b/chrome/browser/BUILD.gn
-@@ -4588,7 +4588,7 @@ static_library("browser") {
+@@ -4544,7 +4544,7 @@ static_library("browser") {
  
      # On Windows, the hashes are embedded in //chrome:chrome_initial rather
      # than here in :chrome_dll.
@@ -46,10 +46,10 @@ index cb28e691fb863fe7739a7ca536170e6c7a76a315..eacc853e2b9fc3c9e448f419e02d7378
        sources += [ "certificate_viewer_stub.cc" ]
      }
 diff --git a/chrome/test/BUILD.gn b/chrome/test/BUILD.gn
-index 24a27fb4a47678be448d597c7e430ce28d23be11..664e9b0378d5b7c09fa66b7a10c7f938da14aab9 100644
+index 5d7cfeb42574b15ddac55c797000bca490274a6f..8b967ef76faa8190d0064f3fa78a661f451228e1 100644
 --- a/chrome/test/BUILD.gn
 +++ b/chrome/test/BUILD.gn
-@@ -5841,7 +5841,6 @@ test("unit_tests") {
+@@ -5915,7 +5915,6 @@ test("unit_tests") {
  
      deps += [
        "//chrome:other_version",
@@ -57,7 +57,7 @@ index 24a27fb4a47678be448d597c7e430ce28d23be11..664e9b0378d5b7c09fa66b7a10c7f938
        "//chrome//services/util_win:unit_tests",
        "//chrome/app:chrome_dll_resources",
        "//chrome/browser:chrome_process_finder",
-@@ -5864,6 +5863,10 @@ test("unit_tests") {
+@@ -5939,6 +5938,10 @@ test("unit_tests") {
        "//ui/resources",
      ]
  
@@ -68,15 +68,15 @@ index 24a27fb4a47678be448d597c7e430ce28d23be11..664e9b0378d5b7c09fa66b7a10c7f938
      ldflags = [
        "/DELAYLOAD:api-ms-win-core-winrt-error-l1-1-0.dll",
        "/DELAYLOAD:api-ms-win-core-winrt-l1-1-0.dll",
-@@ -6757,7 +6760,6 @@ test("unit_tests") {
+@@ -6826,7 +6829,6 @@ test("unit_tests") {
      }
  
      deps += [
 -      "//chrome:packed_resources_integrity_hash",
        "//chrome/browser:cart_db_content_proto",
        "//chrome/browser:coupon_db_content_proto",
-       "//chrome/browser/media/router:test_support",
-@@ -6856,6 +6858,10 @@ test("unit_tests") {
+       "//chrome/browser/autofill_assistant/password_change/proto:proto",
+@@ -6937,6 +6939,10 @@ test("unit_tests") {
      }
    }
  

patches/chromium/build_gn.patch

@@ -14,7 +14,7 @@ tradeoff is that switching from MAS_BUILD to !MAS_BUILD or vice-versa will
 rebuild the entire tree.
 
 diff --git a/build/config/BUILDCONFIG.gn b/build/config/BUILDCONFIG.gn
-index d960648941d8b959b25f87b364a594ec44760348..74a14a2373305e2e62b974b34a28ea9a62c6a911 100644
+index c737e53c2ce7237974f6c749eae60ba1de7ec2c1..26ba3ae4a77bc8f525c2ad927ff2956c028ef337 100644
 --- a/build/config/BUILDCONFIG.gn
 +++ b/build/config/BUILDCONFIG.gn
 @@ -123,6 +123,9 @@ if (current_os == "") {
@@ -27,7 +27,7 @@ index d960648941d8b959b25f87b364a594ec44760348..74a14a2373305e2e62b974b34a28ea9a
    # Set to enable the official build level of optimization. This has nothing
    # to do with branding, but enables an additional level of optimization above
    # release (!is_debug). This might be better expressed as a tri-state
-@@ -349,6 +352,7 @@ default_compiler_configs = [
+@@ -348,6 +351,7 @@ default_compiler_configs = [
    "//build/config/compiler/pgo:default_pgo_flags",
    "//build/config/coverage:default_coverage",
    "//build/config/sanitizers:default_sanitizer_flags",

patches/chromium/build_libc_as_static_library.patch

@@ -7,7 +7,7 @@ Build libc++ as static library to compile and pass
 nan tests
 
 diff --git a/buildtools/third_party/libc++/BUILD.gn b/buildtools/third_party/libc++/BUILD.gn
-index 74b6ad644d49c003996db0eab225ea30ac17420a..0a1ba3510be3047bfc34e603c5aaafbf15908269 100644
+index b3e5378f711c54b76c73179e791646d4e5e4e96b..262c8e53ec25b2e91a73b5971d64dbe5d5e005a1 100644
 --- a/buildtools/third_party/libc++/BUILD.gn
 +++ b/buildtools/third_party/libc++/BUILD.gn
 @@ -44,7 +44,11 @@ config("winver") {

patches/chromium/build_make_libcxx_abi_unstable_false_for_electron.patch

@@ -6,10 +6,10 @@ Subject: build: make libcxx_abi_unstable false for electron
 https://nornagon.medium.com/a-libc-odyssey-973e51649063
 
 diff --git a/build/config/c++/BUILD.gn b/build/config/c++/BUILD.gn
-index 046792ac275853bf109537589b911cfada44ed24..e43daeaa8f8c8e23eea99b3f8f5f48f92012bbc1 100644
+index 2e5843b9f0a5d39d8dbfea0ae5d2ebb413c0ac7d..f4c901e9980ad068a2903482f712bfa8b1310057 100644
 --- a/build/config/c++/BUILD.gn
 +++ b/build/config/c++/BUILD.gn
-@@ -8,6 +8,11 @@ assert(use_custom_libcxx, "should only be used if use_custom_libcxx is set")
+@@ -9,6 +9,11 @@ assert(use_custom_libcxx, "should only be used if use_custom_libcxx is set")
  
  libcxx_abi_unstable = true
  

patches/chromium/can_create_window.patch

@@ -9,10 +9,10 @@ potentially prevent a window from being created.
 TODO(loc): this patch is currently broken.
 
 diff --git a/content/browser/renderer_host/render_frame_host_impl.cc b/content/browser/renderer_host/render_frame_host_impl.cc
-index aa0be995df8c2f9fa0d84922d30c7e1cdf9025c8..e588b460aa32b4c984d593ed54e10310b59ace9b 100644
+index 381bb7d6b1ec2f321dcab9a217aa57e5b2c21925..bdf2fa0461840d6059b4a7d6660a356be5c38ba0 100644
 --- a/content/browser/renderer_host/render_frame_host_impl.cc
 +++ b/content/browser/renderer_host/render_frame_host_impl.cc
-@@ -6840,6 +6840,7 @@ void RenderFrameHostImpl::CreateNewWindow(
+@@ -7127,6 +7127,7 @@ void RenderFrameHostImpl::CreateNewWindow(
            last_committed_origin_, params->window_container_type,
            params->target_url, params->referrer.To<Referrer>(),
            params->frame_name, params->disposition, *params->features,
@@ -21,10 +21,10 @@ index aa0be995df8c2f9fa0d84922d30c7e1cdf9025c8..e588b460aa32b4c984d593ed54e10310
            &no_javascript_access);
  
 diff --git a/content/browser/web_contents/web_contents_impl.cc b/content/browser/web_contents/web_contents_impl.cc
-index 6da28755d61f8957b0e6b6d0f1e669c2dbb347fa..a96bb634eb5c5405abb62b88d576e5e3ed354caa 100644
+index 1470df421f254725be1a55be5756e47988798035..1c69625326df08b85ec77d01b588fc3a8ce58553 100644
 --- a/content/browser/web_contents/web_contents_impl.cc
 +++ b/content/browser/web_contents/web_contents_impl.cc
-@@ -3951,6 +3951,14 @@ FrameTree* WebContentsImpl::CreateNewWindow(
+@@ -3949,6 +3949,14 @@ FrameTree* WebContentsImpl::CreateNewWindow(
    }
    auto* new_contents_impl = new_contents.get();
  
@@ -39,7 +39,7 @@ index 6da28755d61f8957b0e6b6d0f1e669c2dbb347fa..a96bb634eb5c5405abb62b88d576e5e3
    new_contents_impl->GetController().SetSessionStorageNamespace(
        partition_config, session_storage_namespace);
  
-@@ -3995,12 +4003,6 @@ FrameTree* WebContentsImpl::CreateNewWindow(
+@@ -3993,12 +4001,6 @@ FrameTree* WebContentsImpl::CreateNewWindow(
      AddWebContentsDestructionObserver(new_contents_impl);
    }
  
@@ -53,10 +53,10 @@ index 6da28755d61f8957b0e6b6d0f1e669c2dbb347fa..a96bb634eb5c5405abb62b88d576e5e3
                               new_contents_impl, opener, params.target_url,
                               params.referrer.To<Referrer>(), params.disposition,
 diff --git a/content/common/frame.mojom b/content/common/frame.mojom
-index a7f36529608011013dab96a803ad3187c940fc81..2bbcea3efede2fda4ff2c5b270e1db0135c54290 100644
+index 3aafb44665ed475084355144663a3c7395a009d5..d32b572673e24f14c60b27e8a1fab683b7aa3e8e 100644
 --- a/content/common/frame.mojom
 +++ b/content/common/frame.mojom
-@@ -569,6 +569,10 @@ struct CreateNewWindowParams {
+@@ -575,6 +575,10 @@ struct CreateNewWindowParams {
  
    // Governs how downloads are handled if `target_url` results in a download.
    blink.mojom.NavigationDownloadPolicy download_policy;
@@ -68,10 +68,10 @@ index a7f36529608011013dab96a803ad3187c940fc81..2bbcea3efede2fda4ff2c5b270e1db01
  
  // Operation result when the renderer asks the browser to create a new window.
 diff --git a/content/public/browser/content_browser_client.cc b/content/public/browser/content_browser_client.cc
-index 984205b3d1bb4acfde6c5d106118a88f866af341..e33a5c9c6d493cd4ac2664ea10390193e3e53fcc 100644
+index 9a593698d9e3aebe21cb7e74e0e5603adde30f87..c57b933d2950a69c92d47057b83d96a66416bc1b 100644
 --- a/content/public/browser/content_browser_client.cc
 +++ b/content/public/browser/content_browser_client.cc
-@@ -581,6 +581,8 @@ bool ContentBrowserClient::CanCreateWindow(
+@@ -604,6 +604,8 @@ bool ContentBrowserClient::CanCreateWindow(
      const std::string& frame_name,
      WindowOpenDisposition disposition,
      const blink::mojom::WindowFeatures& features,
@@ -81,10 +81,10 @@ index 984205b3d1bb4acfde6c5d106118a88f866af341..e33a5c9c6d493cd4ac2664ea10390193
      bool opener_suppressed,
      bool* no_javascript_access) {
 diff --git a/content/public/browser/content_browser_client.h b/content/public/browser/content_browser_client.h
-index 7e22f3e0b84f3e6b1ef7b1c5176665b38bd53629..f6d98708c436447ee6c93acb5d476719c238ca9c 100644
+index 58755b9dca27ddd4d75cf08ecdc47c6d9d9da724..2f786efe35ebdff7061118a14247859ed30eeb2a 100644
 --- a/content/public/browser/content_browser_client.h
 +++ b/content/public/browser/content_browser_client.h
-@@ -168,6 +168,7 @@ class NetworkService;
+@@ -165,6 +165,7 @@ class NetworkService;
  class TrustedURLLoaderHeaderClient;
  }  // namespace mojom
  struct ResourceRequest;
@@ -92,7 +92,7 @@ index 7e22f3e0b84f3e6b1ef7b1c5176665b38bd53629..f6d98708c436447ee6c93acb5d476719
  }  // namespace network
  
  namespace sandbox {
-@@ -959,6 +960,8 @@ class CONTENT_EXPORT ContentBrowserClient {
+@@ -977,6 +978,8 @@ class CONTENT_EXPORT ContentBrowserClient {
        const std::string& frame_name,
        WindowOpenDisposition disposition,
        const blink::mojom::WindowFeatures& features,
@@ -102,7 +102,7 @@ index 7e22f3e0b84f3e6b1ef7b1c5176665b38bd53629..f6d98708c436447ee6c93acb5d476719
        bool opener_suppressed,
        bool* no_javascript_access);
 diff --git a/content/public/browser/web_contents_delegate.cc b/content/public/browser/web_contents_delegate.cc
-index 9bbc7cf6d9542a3f013313e0c497839da2beb9d1..c01e06b08b1cca7a663e30476a551904ce9c6db8 100644
+index ef3889063b562a37fbd945fe30db0d776ecaee7a..99e8449e9c515dd70ed88546a71f83ae139178fe 100644
 --- a/content/public/browser/web_contents_delegate.cc
 +++ b/content/public/browser/web_contents_delegate.cc
 @@ -26,6 +26,17 @@ namespace content {
@@ -124,7 +124,7 @@ index 9bbc7cf6d9542a3f013313e0c497839da2beb9d1..c01e06b08b1cca7a663e30476a551904
                                                   const OpenURLParams& params) {
    return nullptr;
 diff --git a/content/public/browser/web_contents_delegate.h b/content/public/browser/web_contents_delegate.h
-index 04aa4d993b331396ee20464f6e1d2da10c91c834..2556c044b6e28501a5fac9b0040e623b8f35f497 100644
+index 348dcde05d71e7d16e4c7bb1d8d9f8718070e669..5a9cc64d6e0d9d01f5dc133c7fcab34101bc32db 100644
 --- a/content/public/browser/web_contents_delegate.h
 +++ b/content/public/browser/web_contents_delegate.h
 @@ -16,6 +16,7 @@
@@ -150,28 +150,20 @@ index 04aa4d993b331396ee20464f6e1d2da10c91c834..2556c044b6e28501a5fac9b0040e623b
    // typically happens when popups are created.
    virtual void WebContentsCreated(WebContents* source_contents,
 diff --git a/content/renderer/render_view_impl.cc b/content/renderer/render_view_impl.cc
-index 89b07508aef80680a847c106fea0e2fa58ff964b..6630af3583a6bac6135d46644280d6444fe981b8 100644
+index 9b42426f878a741290c89fb6b641b6c44423aa6f..d0c99c26116f6affc801ac59657b89c2ae159a0c 100644
 --- a/content/renderer/render_view_impl.cc
 +++ b/content/renderer/render_view_impl.cc
-@@ -33,6 +33,7 @@
- #include "third_party/blink/public/platform/impression_conversions.h"
- #include "third_party/blink/public/platform/modules/video_capture/web_video_capture_impl_manager.h"
- #include "third_party/blink/public/platform/url_conversion.h"
-+#include "third_party/blink/public/platform/web_url_request_util.h"
- #include "third_party/blink/public/web/modules/mediastream/web_media_stream_device_observer.h"
- #include "third_party/blink/public/web/web_frame_widget.h"
- #include "third_party/blink/public/web/web_local_frame.h"
-@@ -295,6 +296,10 @@ WebView* RenderViewImpl::CreateView(
-     params->impression = blink::ConvertWebImpressionToImpression(*impression);
-   }
+@@ -308,6 +308,10 @@ WebView* RenderViewImpl::CreateView(
+       /*openee_can_access_opener_origin=*/true, !creator->IsAllowedToDownload(),
+       creator->IsAdSubframe());
  
 +  params->raw_features = features.raw_features.Utf8(
 +      WTF::UTF8ConversionMode::kStrictUTF8ConversionReplacingUnpairedSurrogatesWithFFFD);
 +  params->body = GetRequestBodyForWebURLRequest(request);
 +
-   params->download_policy.ApplyDownloadFramePolicy(
-       /*is_opener_navigation=*/false, request.HasUserGesture(),
-       // `openee_can_access_opener_origin` only matters for opener navigations,
+   // We preserve this information before sending the message since |params| is
+   // moved on send.
+   bool is_background_tab =
 diff --git a/content/web_test/browser/web_test_content_browser_client.cc b/content/web_test/browser/web_test_content_browser_client.cc
 index 2e7c332565ebe33b00ab7fff96a6a8dfc61422a6..0ab061f51d1d0c93f23bfcf5ba051172cea37eb8 100644
 --- a/content/web_test/browser/web_test_content_browser_client.cc
@@ -199,13 +191,13 @@ index 00e2a8c21d4f0ef00c942498251fa44065da63c0..0fc4b092fa276063e05f990bf920fecd
                         bool opener_suppressed,
                         bool* no_javascript_access) override;
 diff --git a/third_party/blink/public/web/web_window_features.h b/third_party/blink/public/web/web_window_features.h
-index 84d32491a56528a84b4395fba1d54cdbb38d522b..09998a83c449ef8cd9f360fbcdcf7edc0bbfa4a9 100644
+index 34570168ccb123f5102dcf8fa6bbf98e7c373ec6..192701e56d258da41b3724292853885e4daf3420 100644
 --- a/third_party/blink/public/web/web_window_features.h
 +++ b/third_party/blink/public/web/web_window_features.h
 @@ -34,6 +34,7 @@
  #include "third_party/abseil-cpp/absl/types/optional.h"
  
- #include "third_party/blink/public/platform/web_impression.h"
+ #include "third_party/blink/public/common/navigation/impression.h"
 +#include "third_party/blink/renderer/platform/wtf/text/wtf_string.h"
  
  namespace blink {
@@ -213,21 +205,22 @@ index 84d32491a56528a84b4395fba1d54cdbb38d522b..09998a83c449ef8cd9f360fbcdcf7edc
 @@ -68,6 +69,8 @@ struct WebWindowFeatures {
    // Represents the attribution source declared by Attribution Reporting related
    // window features, if any.
-   absl::optional<WebImpression> impression;
+   absl::optional<Impression> impression;
 +
 +  String raw_features;
  };
  
  }  // namespace blink
 diff --git a/third_party/blink/renderer/core/frame/local_dom_window.cc b/third_party/blink/renderer/core/frame/local_dom_window.cc
-index ea47699384318126fef1a8c4cc3cb881cdc8e624..22d63b9f89913878518294f19afc85550196ca3e 100644
+index fd6118fd28df7ea3f86f7fff6ed7ae7b0517777b..a1cb624589a302340d152a1389adac26d5c6d6ee 100644
 --- a/third_party/blink/renderer/core/frame/local_dom_window.cc
 +++ b/third_party/blink/renderer/core/frame/local_dom_window.cc
-@@ -2088,6 +2088,7 @@ DOMWindow* LocalDOMWindow::open(v8::Isolate* isolate,
- 
+@@ -2101,6 +2101,8 @@ DOMWindow* LocalDOMWindow::open(v8::Isolate* isolate,
    WebWindowFeatures window_features =
-       GetWindowFeaturesFromString(features, incumbent_window);
-+  window_features.raw_features = features;
+       GetWindowFeaturesFromString(features, entered_window);
  
++  window_features.raw_features = features;
++
    // In fenced frames, we should always use `noopener`.
    if (GetFrame()->IsInFencedFrameTree()) {
+     window_features.noopener = true;

patches/chromium/chore_expose_v8_initialization_isolate_callbacks.patch

@@ -1,41 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Shelley Vohr <shelley.vohr@gmail.com>
-Date: Mon, 5 Oct 2020 13:43:59 -0700
-Subject: chore: expose v8 initialization isolate callbacks
-
-This commit is necessary in order to ensure consistent behavior from
-v8 Isolate callbacks in contexts which Node.js does not control. If
-we're running with contextIsolation enabled, we should be falling back
-to Blink's logic. This will be upstreamed in some form.
-
-diff --git a/third_party/blink/renderer/bindings/core/v8/v8_initializer.cc b/third_party/blink/renderer/bindings/core/v8/v8_initializer.cc
-index 90d3a635eec331130b738d0839cc9fdfa60ce451..9eb900ff4449f277f8c5ab3ccc29b0aa725be356 100644
---- a/third_party/blink/renderer/bindings/core/v8/v8_initializer.cc
-+++ b/third_party/blink/renderer/bindings/core/v8/v8_initializer.cc
-@@ -448,8 +448,9 @@ CodeGenerationCheckCallbackInMainThread(v8::Local<v8::Context> context,
-   return {true, std::move(stringified_source)};
- }
- 
--bool V8Initializer::WasmCodeGenerationCheckCallbackInMainThread(v8::Local<v8::Context> context,
--                                                 v8::Local<v8::String> source) {
-+bool V8Initializer::WasmCodeGenerationCheckCallbackInMainThread(
-+    v8::Local<v8::Context> context,
-+    v8::Local<v8::String> source) {
-   if (ExecutionContext* execution_context = ToExecutionContext(context)) {
-     if (ContentSecurityPolicy* policy =
-             execution_context->GetContentSecurityPolicy()) {
-diff --git a/third_party/blink/renderer/bindings/core/v8/v8_initializer.h b/third_party/blink/renderer/bindings/core/v8/v8_initializer.h
-index 932c6aad3df51dd6790e55bf708703767843dc5e..6865fd33e62f766c5a162ded8627c332bf2ed173 100644
---- a/third_party/blink/renderer/bindings/core/v8/v8_initializer.h
-+++ b/third_party/blink/renderer/bindings/core/v8/v8_initializer.h
-@@ -69,8 +69,8 @@ class CORE_EXPORT V8Initializer {
-   static void MessageHandlerInWorker(v8::Local<v8::Message>,
-                                      v8::Local<v8::Value>);
-   static bool WasmCodeGenerationCheckCallbackInMainThread(
--      v8::Local<v8::Context> context,
--      v8::Local<v8::String> source);
-+    v8::Local<v8::Context> context,
-+    v8::Local<v8::String> source);
- };
- 
- }  // namespace blink

patches/chromium/chore_provide_iswebcontentscreationoverridden_with_full_params.patch

@@ -35,7 +35,7 @@ index 5b4d70991e19edcdfee731c56251932bf43e535f..4d996e3821410b2325ef85499f8c307c
  
  #endif  // CHROME_BROWSER_ANDROID_DOCUMENT_DOCUMENT_WEB_CONTENTS_DELEGATE_H_
 diff --git a/chrome/browser/media/offscreen_tab.cc b/chrome/browser/media/offscreen_tab.cc
-index 27452df45433e4aeb7b9008f8e5b91dd4b5f50db..5c6f9936e6d3d2647d7efbc70efda8551c5516c7 100644
+index 3289268d3ddb3fbb625b8498c2f84370c37acdff..89920af3e44257b6091bb558537fe07d2bb2d899 100644
 --- a/chrome/browser/media/offscreen_tab.cc
 +++ b/chrome/browser/media/offscreen_tab.cc
 @@ -285,8 +285,7 @@ bool OffscreenTab::IsWebContentsCreationOverridden(
@@ -63,10 +63,10 @@ index faa684c429e8cd5817c043db48dcbea33c6c8782..8b5991bc8279585cc0749f6816aa8a03
        content::RenderFrameHost* requesting_frame,
        const blink::mojom::FullscreenOptions& options) final;
 diff --git a/chrome/browser/ui/ash/ash_web_view_impl.cc b/chrome/browser/ui/ash/ash_web_view_impl.cc
-index 46e5ec4d834e9478db523a5a078218104c161a57..e584921a6d575740fc0331a8bac05904558efc15 100644
+index 268355f22577cf21926e209a9fcdb3f52314f2ac..80f998cdb10d9955e438ba5ef4599b35c448fae2 100644
 --- a/chrome/browser/ui/ash/ash_web_view_impl.cc
 +++ b/chrome/browser/ui/ash/ash_web_view_impl.cc
-@@ -83,10 +83,9 @@ bool AshWebViewImpl::IsWebContentsCreationOverridden(
+@@ -84,10 +84,9 @@ bool AshWebViewImpl::IsWebContentsCreationOverridden(
      content::SiteInstance* source_site_instance,
      content::mojom::WindowContainerType window_container_type,
      const GURL& opener_url,
@@ -94,7 +94,7 @@ index f0333177f885000fb22818ffa30a0c4ad520a161..03e82957f9d7bf009dcbf5fcd43718c9
        content::WebContents* source,
        const content::OpenURLParams& params) override;
 diff --git a/chrome/browser/ui/ash/keyboard/chrome_keyboard_web_contents.cc b/chrome/browser/ui/ash/keyboard/chrome_keyboard_web_contents.cc
-index 6688ba8ba2fb7d930773144cdbc43f1f6fa2b685..22015c7b9b50e1264551ce226757f90e29191d8f 100644
+index 1318d5e04d5448d2b357454c3ce4207264288760..3b0324c35d5b18ed2e29264aae860c4887cdd382 100644
 --- a/chrome/browser/ui/ash/keyboard/chrome_keyboard_web_contents.cc
 +++ b/chrome/browser/ui/ash/keyboard/chrome_keyboard_web_contents.cc
 @@ -71,8 +71,7 @@ class ChromeKeyboardContentsDelegate : public content::WebContentsDelegate,
@@ -108,10 +108,10 @@ index 6688ba8ba2fb7d930773144cdbc43f1f6fa2b685..22015c7b9b50e1264551ce226757f90e
    }
  
 diff --git a/chrome/browser/ui/browser.cc b/chrome/browser/ui/browser.cc
-index 1837aac53e6e13aebb0eee00249b305e0c7192c9..cf0b500239f635decc718fb9cfceb3f3f5be23c6 100644
+index 458af711eda586adbc4efc515da6a21e62879cfc..221ec7acca678060f0f152d4fee32d3378875bc1 100644
 --- a/chrome/browser/ui/browser.cc
 +++ b/chrome/browser/ui/browser.cc
-@@ -1798,12 +1798,11 @@ bool Browser::IsWebContentsCreationOverridden(
+@@ -1794,12 +1794,11 @@ bool Browser::IsWebContentsCreationOverridden(
      content::SiteInstance* source_site_instance,
      content::mojom::WindowContainerType window_container_type,
      const GURL& opener_url,
@@ -127,10 +127,10 @@ index 1837aac53e6e13aebb0eee00249b305e0c7192c9..cf0b500239f635decc718fb9cfceb3f3
  
  WebContents* Browser::CreateCustomWebContents(
 diff --git a/chrome/browser/ui/browser.h b/chrome/browser/ui/browser.h
-index 631c30c8f153e72cd92de457d8ba6f44574edbe6..a24181efacd35c3d7b9b0bcdc066dd0a0f7bc43a 100644
+index 87859f4741386c967a0568273a2fd16ad26c4a96..8265417dcf7397b2eb37e997547d1e8cfd977509 100644
 --- a/chrome/browser/ui/browser.h
 +++ b/chrome/browser/ui/browser.h
-@@ -828,8 +828,7 @@ class Browser : public TabStripModelObserver,
+@@ -839,8 +839,7 @@ class Browser : public TabStripModelObserver,
        content::SiteInstance* source_site_instance,
        content::mojom::WindowContainerType window_container_type,
        const GURL& opener_url,
@@ -218,10 +218,10 @@ index 2930898b03d7b7ef86d13733cec3cbe84105c166..76625339f42a867c8b68840253e91648
    void SetContentsBounds(content::WebContents* source,
                           const gfx::Rect& bounds) override;
 diff --git a/components/offline_pages/content/background_loader/background_loader_contents.cc b/components/offline_pages/content/background_loader/background_loader_contents.cc
-index 2834e3ee5778185741779a473cf5157788a76cc5..64fcddc952065e574a84edd99e5b1b80febd3d26 100644
+index 186711550a45f4bf383cdceeabac9e1f46aeca89..df1ecec4bf56de72a6164644d3094557a7a52896 100644
 --- a/components/offline_pages/content/background_loader/background_loader_contents.cc
 +++ b/components/offline_pages/content/background_loader/background_loader_contents.cc
-@@ -81,8 +81,7 @@ bool BackgroundLoaderContents::IsWebContentsCreationOverridden(
+@@ -83,8 +83,7 @@ bool BackgroundLoaderContents::IsWebContentsCreationOverridden(
      content::SiteInstance* source_site_instance,
      content::mojom::WindowContainerType window_container_type,
      const GURL& opener_url,
@@ -246,10 +246,10 @@ index c6bd5c19f8a7ceec17c9e32af5296a9617f3a619..02199b439fba7fdc617b7f7980d958b7
    void AddNewContents(content::WebContents* source,
                        std::unique_ptr<content::WebContents> new_contents,
 diff --git a/content/browser/web_contents/web_contents_impl.cc b/content/browser/web_contents/web_contents_impl.cc
-index 1b616ba52d9c77c64c7f24a0d204ce36641dce38..0303ae1c4d8681bc1bf56eb9ff1fc13afd678706 100644
+index 686fc99becf068106cc9fb372d2dce1e8d8c5114..eb94d05bf03d04b508123675c31957b8d22ee13a 100644
 --- a/content/browser/web_contents/web_contents_impl.cc
 +++ b/content/browser/web_contents/web_contents_impl.cc
-@@ -3899,8 +3899,7 @@ FrameTree* WebContentsImpl::CreateNewWindow(
+@@ -3882,8 +3882,7 @@ FrameTree* WebContentsImpl::CreateNewWindow(
  
    if (delegate_ && delegate_->IsWebContentsCreationOverridden(
                         source_site_instance, params.window_container_type,
@@ -260,7 +260,7 @@ index 1b616ba52d9c77c64c7f24a0d204ce36641dce38..0303ae1c4d8681bc1bf56eb9ff1fc13a
          static_cast<WebContentsImpl*>(delegate_->CreateCustomWebContents(
              opener, source_site_instance, is_new_browsing_instance,
 diff --git a/content/public/browser/web_contents_delegate.cc b/content/public/browser/web_contents_delegate.cc
-index c01e06b08b1cca7a663e30476a551904ce9c6db8..9f50a8721560f734270308776f2f37ad49a8cb91 100644
+index 99e8449e9c515dd70ed88546a71f83ae139178fe..4f395474d3e0e1bf7a594fe3fa3e4cb53327aa69 100644
 --- a/content/public/browser/web_contents_delegate.cc
 +++ b/content/public/browser/web_contents_delegate.cc
 @@ -134,8 +134,7 @@ bool WebContentsDelegate::IsWebContentsCreationOverridden(
@@ -274,7 +274,7 @@ index c01e06b08b1cca7a663e30476a551904ce9c6db8..9f50a8721560f734270308776f2f37ad
  }
  
 diff --git a/content/public/browser/web_contents_delegate.h b/content/public/browser/web_contents_delegate.h
-index 2556c044b6e28501a5fac9b0040e623b8f35f497..4c6cd654551b2f5cfd59a5271a8d95a9e6862d3c 100644
+index 5a9cc64d6e0d9d01f5dc133c7fcab34101bc32db..166e506f1afbcb1a3a661479d489e71d8d8ff552 100644
 --- a/content/public/browser/web_contents_delegate.h
 +++ b/content/public/browser/web_contents_delegate.h
 @@ -317,8 +317,7 @@ class CONTENT_EXPORT WebContentsDelegate {
@@ -288,7 +288,7 @@ index 2556c044b6e28501a5fac9b0040e623b8f35f497..4c6cd654551b2f5cfd59a5271a8d95a9
    // Allow delegate to creates a custom WebContents when
    // WebContents::CreateNewWindow() is called. This function is only called
 diff --git a/extensions/browser/guest_view/extension_options/extension_options_guest.cc b/extensions/browser/guest_view/extension_options/extension_options_guest.cc
-index bddbd37ca73369adb82dad5bb8b25f0ab2a7f878..9bf28cd7f926f41041f40d4bc0a497c8b8730b86 100644
+index 8349c8cb2078d09c9550024ae5ca845bdebfbd35..e3763eaa2c6f7ce842cf8964bf5590efd3892c61 100644
 --- a/extensions/browser/guest_view/extension_options/extension_options_guest.cc
 +++ b/extensions/browser/guest_view/extension_options/extension_options_guest.cc
 @@ -213,8 +213,7 @@ bool ExtensionOptionsGuest::IsWebContentsCreationOverridden(
@@ -316,7 +316,7 @@ index 7350382146178f58960a9bf68cd959076d2d9790..a70a94d14bdfa993feab60b8e4f32e10
        content::RenderFrameHost* opener,
        content::SiteInstance* source_site_instance,
 diff --git a/extensions/browser/guest_view/mime_handler_view/mime_handler_view_guest.cc b/extensions/browser/guest_view/mime_handler_view/mime_handler_view_guest.cc
-index b652f1f30ce7043a0c8434d05a3b1da653aee1fc..259c62c60f302abebf167709b4a1c68ad5607129 100644
+index aef9d1a79fcea0e73541cf8257b498e167c9dfeb..1f0c4209d1c6be31e1abd6bcfcaf181fd2d4858c 100644
 --- a/extensions/browser/guest_view/mime_handler_view/mime_handler_view_guest.cc
 +++ b/extensions/browser/guest_view/mime_handler_view/mime_handler_view_guest.cc
 @@ -402,8 +402,7 @@ bool MimeHandlerViewGuest::IsWebContentsCreationOverridden(
@@ -343,11 +343,11 @@ index ef6faf317dd4168adf6fd530a7da0b80f9166dec..f401659a81d4aeaf71039d71eb8fec48
    content::WebContents* CreateCustomWebContents(
        content::RenderFrameHost* opener,
        content::SiteInstance* source_site_instance,
-diff --git a/fuchsia/engine/browser/frame_impl.cc b/fuchsia/engine/browser/frame_impl.cc
-index d2497be79bb5d7943589bb928e2fbe13f76aa3e3..54adf30432cf178f2d00630420e45cfa95551b54 100644
---- a/fuchsia/engine/browser/frame_impl.cc
-+++ b/fuchsia/engine/browser/frame_impl.cc
-@@ -404,8 +404,7 @@ bool FrameImpl::IsWebContentsCreationOverridden(
+diff --git a/fuchsia_web/webengine/browser/frame_impl.cc b/fuchsia_web/webengine/browser/frame_impl.cc
+index 5b804b3ad089154424eda6eb58edbb24baf67794..7f055a37080f40dede16dfa7b7ad6b3c31c5282d 100644
+--- a/fuchsia_web/webengine/browser/frame_impl.cc
++++ b/fuchsia_web/webengine/browser/frame_impl.cc
+@@ -412,8 +412,7 @@ bool FrameImpl::IsWebContentsCreationOverridden(
      content::SiteInstance* source_site_instance,
      content::mojom::WindowContainerType window_container_type,
      const GURL& opener_url,
@@ -357,11 +357,11 @@ index d2497be79bb5d7943589bb928e2fbe13f76aa3e3..54adf30432cf178f2d00630420e45cfa
    // Specify a generous upper bound for unacknowledged popup windows, so that we
    // can catch bad client behavior while not interfering with normal operation.
    constexpr size_t kMaxPendingWebContentsCount = 10;
-diff --git a/fuchsia/engine/browser/frame_impl.h b/fuchsia/engine/browser/frame_impl.h
-index f2054bca778784c223beb02de150cfeb31c52907..53bf6bc205e9c631597bfbda46f4a0b5b4bb72ed 100644
---- a/fuchsia/engine/browser/frame_impl.h
-+++ b/fuchsia/engine/browser/frame_impl.h
-@@ -307,8 +307,7 @@ class FrameImpl : public fuchsia::web::Frame,
+diff --git a/fuchsia_web/webengine/browser/frame_impl.h b/fuchsia_web/webengine/browser/frame_impl.h
+index 0661fd642dcee69a7c8f955490dadf32dc0eb468..e3fa74da87513fbfcd035fa872dc938db96c2766 100644
+--- a/fuchsia_web/webengine/browser/frame_impl.h
++++ b/fuchsia_web/webengine/browser/frame_impl.h
+@@ -310,8 +310,7 @@ class WEB_ENGINE_EXPORT FrameImpl : public fuchsia::web::Frame,
        content::SiteInstance* source_site_instance,
        content::mojom::WindowContainerType window_container_type,
        const GURL& opener_url,
@@ -372,10 +372,10 @@ index f2054bca778784c223beb02de150cfeb31c52907..53bf6bc205e9c631597bfbda46f4a0b5
                            int opener_render_process_id,
                            int opener_render_frame_id,
 diff --git a/headless/lib/browser/headless_web_contents_impl.cc b/headless/lib/browser/headless_web_contents_impl.cc
-index 899b8beabdf1131a08583470ace5b468576eeab6..21ab4ae22c54846af78518e897dc23ebe4ce8317 100644
+index 807879aa4894e5fabe043d07d5899e5700a7c172..5044c462ccfeaeb4aeb2dd3189e40e60c835ed73 100644
 --- a/headless/lib/browser/headless_web_contents_impl.cc
 +++ b/headless/lib/browser/headless_web_contents_impl.cc
-@@ -177,8 +177,7 @@ class HeadlessWebContentsImpl::Delegate : public content::WebContentsDelegate {
+@@ -179,8 +179,7 @@ class HeadlessWebContentsImpl::Delegate : public content::WebContentsDelegate {
        content::SiteInstance* source_site_instance,
        content::mojom::WindowContainerType window_container_type,
        const GURL& opener_url,
@@ -386,7 +386,7 @@ index 899b8beabdf1131a08583470ace5b468576eeab6..21ab4ae22c54846af78518e897dc23eb
          ->options()
          ->block_new_web_contents();
 diff --git a/ui/views/controls/webview/web_dialog_view.cc b/ui/views/controls/webview/web_dialog_view.cc
-index 749200efec166e0c29402a3d5e079f2e94460363..2cbc96e911291fb0b31c3f4a1444ded0be4521f5 100644
+index fb5239100bdc35d2d5cf47765c1bf1b285b20cf5..b4b2609ddbe0a0adfccffb4f4a0a56849579dd2d 100644
 --- a/ui/views/controls/webview/web_dialog_view.cc
 +++ b/ui/views/controls/webview/web_dialog_view.cc
 @@ -427,8 +427,7 @@ bool WebDialogView::IsWebContentsCreationOverridden(

patches/chromium/chrome_key_systems.patch

@@ -7,7 +7,7 @@ Disable persiste licence support check for widevine cdm,
 as its not supported in the current version of chrome.
 
 diff --git a/chrome/renderer/media/chrome_key_systems.cc b/chrome/renderer/media/chrome_key_systems.cc
-index 587144562fffda66cee9cbd23b16fb4e8607d208..a41bb82f8dcf292cf23aa8781bd5a5c52f11e578 100644
+index f3cf8498493526d125eb42a7c42f7ad85dbc1fc2..35ec5dc4d87ecc61bd0f48be4c5d5867e9f75cce 100644
 --- a/chrome/renderer/media/chrome_key_systems.cc
 +++ b/chrome/renderer/media/chrome_key_systems.cc
 @@ -17,7 +17,9 @@
@@ -20,18 +20,18 @@ index 587144562fffda66cee9cbd23b16fb4e8607d208..a41bb82f8dcf292cf23aa8781bd5a5c5
  #include "components/cdm/renderer/external_clear_key_key_system_properties.h"
  #include "components/cdm/renderer/widevine_key_system_properties.h"
  #include "content/public/renderer/render_thread.h"
-@@ -183,12 +185,14 @@ SupportedCodecs GetSupportedCodecs(const media::CdmCapability& capability) {
+@@ -184,12 +186,14 @@ SupportedCodecs GetSupportedCodecs(const media::CdmCapability& capability) {
  
- // Returns persistent-license session support.
- EmeSessionTypeSupport GetPersistentLicenseSupport(bool supported_by_the_cdm) {
+ // Returns whether persistent-license session can be supported.
+ bool CanSupportPersistentLicense() {
 +#if 0
    // Do not support persistent-license if the process cannot persist data.
    // TODO(crbug.com/457487): Have a better plan on this. See bug for details.
    if (ChromeRenderThreadObserver::is_incognito_process()) {
      DVLOG(2) << __func__ << ": Not supported in incognito process.";
-     return EmeSessionTypeSupport::NOT_SUPPORTED;
+     return false;
    }
 +#endif
  
-   if (!supported_by_the_cdm) {
-     DVLOG(2) << __func__ << ": Not supported by the CDM.";
+ // On ChromeOS, platform verification is similar to CDM host verification.
+ #if BUILDFLAG(ENABLE_CDM_HOST_VERIFICATION) || BUILDFLAG(IS_CHROMEOS)

patches/chromium/command-ismediakey.patch

@@ -66,7 +66,7 @@ index eb3f3431a3774c3a05afd4c7350f3801e9c8c684..b8970ef9ddb69d6a9fc6d106293e7605
  
    bool is_listening_ = false;
 diff --git a/chrome/browser/extensions/global_shortcut_listener_win.cc b/chrome/browser/extensions/global_shortcut_listener_win.cc
-index 0f344ee352a48497e77a72bb298146c61e7fcf2a..3bad4263ea552fc63445bf5613f8add746a3a374 100644
+index 2778a18b6c28f3342c6b43d1de71fbbd46c72f06..85af551f87b8b0f9aed7a2a395ecf79f81f5a0a1 100644
 --- a/chrome/browser/extensions/global_shortcut_listener_win.cc
 +++ b/chrome/browser/extensions/global_shortcut_listener_win.cc
 @@ -62,6 +62,8 @@ void GlobalShortcutListenerWin::OnWndProc(HWND hwnd,
@@ -117,7 +117,7 @@ index 1145e1f3d79482b5bb468c3128431ac674310e5f..e9f595045e0c076e0735f27dfc38bfbc
  
  }  // namespace ui
 diff --git a/ui/base/accelerators/media_keys_listener_mac.mm b/ui/base/accelerators/media_keys_listener_mac.mm
-index ada705fb42e88d4bfa05b212c84111be9057a50e..a866b975687dd08ad88031a63f161b3164e82455 100644
+index 0bed8d1e2e2ed4a8cfc9d51ec3d68ac75bd9ff82..6914758849ca485f0f882d0b4a9ded9b02b197a8 100644
 --- a/ui/base/accelerators/media_keys_listener_mac.mm
 +++ b/ui/base/accelerators/media_keys_listener_mac.mm
 @@ -32,6 +32,12 @@ KeyboardCode MediaKeyCodeToKeyboardCode(int key_code) {

patches/chromium/crash_allow_disabling_compression_on_linux.patch

@@ -13,7 +13,7 @@ Ultimately we should remove the option to disable compression, and
 subsequently remove this patch.
 
 diff --git a/components/crash/core/app/breakpad_linux.cc b/components/crash/core/app/breakpad_linux.cc
-index 2eb52b71d7ebc7525cceffbecc99db6751429afd..d3ff2942d831745efed440be0fe1e82441a39ff7 100644
+index a372e9bb12f9cec6235fe529d73b6e0009328038..58f6f559265d0da5e6ca4c711df4b1dbf3d40e38 100644
 --- a/components/crash/core/app/breakpad_linux.cc
 +++ b/components/crash/core/app/breakpad_linux.cc
 @@ -111,6 +111,8 @@ void SetUploadURL(const std::string& url) {

patches/chromium/crash_allow_setting_more_options.patch

@@ -9,7 +9,7 @@ rate-limiting, compression and global annotations.
 This should be upstreamed.
 
 diff --git a/components/crash/core/app/breakpad_linux.cc b/components/crash/core/app/breakpad_linux.cc
-index 4ed2558351e37dde0eb35b6eb32f442346ff2490..3933fa761768b5a45891bfef4c2c2123b92fc276 100644
+index 3c28019ae3d1d8fd43e5e027fa3abe6786658885..b1f8fd4494e7f5deac078023c2e0240d701e1f13 100644
 --- a/components/crash/core/app/breakpad_linux.cc
 +++ b/components/crash/core/app/breakpad_linux.cc
 @@ -113,6 +113,7 @@ void SetUploadURL(const std::string& url) {
@@ -75,7 +75,7 @@ index 24e53fa62c2c4a11494ad3d43f0c5a806930fcdd..9b691baa6cc90cc3f9ada307c43f44c4
    // Used by WebView to sample crashes without generating the unwanted dumps. If
    // the returned value is less than 100, crash dumping will be sampled to that
 diff --git a/components/crash/core/app/crashpad_linux.cc b/components/crash/core/app/crashpad_linux.cc
-index 32e2038e15adae14aa218a353f074cd6654bdc16..72bec9c08d7ec50257a86b0ee7173864d879d7d9 100644
+index 7159bea91a25700f0cb36c48cab62fe2d616b3bd..9bcc5ae7e870c27c3533534c06daa890de5a4816 100644
 --- a/components/crash/core/app/crashpad_linux.cc
 +++ b/components/crash/core/app/crashpad_linux.cc
 @@ -170,6 +170,7 @@ bool PlatformCrashpadInitialization(
@@ -97,9 +97,9 @@ index 32e2038e15adae14aa218a353f074cd6654bdc16..72bec9c08d7ec50257a86b0ee7173864
 +      arguments.push_back("--no-upload-gzip");
 +    }
 +
-     bool result =
-         client.StartHandler(handler_path, *database_path, metrics_path, url,
-                             annotations, arguments, false, false);
+     CHECK(client.StartHandler(handler_path, *database_path, metrics_path, url,
+                               annotations, arguments, false, false));
+   } else {
 diff --git a/components/crash/core/app/crashpad_mac.mm b/components/crash/core/app/crashpad_mac.mm
 index dc041c43371fd58e3121ef6bc423aadb644bb8d0..a1fa566775724b4a1662a939fda3f0a59bf46b96 100644
 --- a/components/crash/core/app/crashpad_mac.mm
@@ -128,10 +128,10 @@ index dc041c43371fd58e3121ef6bc423aadb644bb8d0..a1fa566775724b4a1662a939fda3f0a5
          arguments.push_back("--monitor-self");
        }
 diff --git a/components/crash/core/app/crashpad_win.cc b/components/crash/core/app/crashpad_win.cc
-index d2354b84f3a184ad53571518198055a0a91cbc25..c05529257dda2acf0fa588d49e2b902736d9b02f 100644
+index 80f33dc5e2f2ed330e0726a5735b247ea8e99fd7..b96bf703f6b691886d6e4d5cd6d775945a8995e1 100644
 --- a/components/crash/core/app/crashpad_win.cc
 +++ b/components/crash/core/app/crashpad_win.cc
-@@ -88,6 +88,7 @@ bool PlatformCrashpadInitialization(
+@@ -90,6 +90,7 @@ bool PlatformCrashpadInitialization(
  
      std::map<std::string, std::string> process_annotations;
      GetPlatformCrashpadAnnotations(&process_annotations);
@@ -139,7 +139,7 @@ index d2354b84f3a184ad53571518198055a0a91cbc25..c05529257dda2acf0fa588d49e2b9027
  
      std::string url = crash_reporter_client->GetUploadUrl();
  
-@@ -126,6 +127,13 @@ bool PlatformCrashpadInitialization(
+@@ -128,6 +129,13 @@ bool PlatformCrashpadInitialization(
  
      std::vector<std::string> arguments(start_arguments);
  

patches/chromium/custom_protocols_plzserviceworker.patch

@@ -8,10 +8,10 @@ Allow registering custom protocols to handle service worker main script fetching
 Refs https://bugs.chromium.org/p/chromium/issues/detail?id=996511
 
 diff --git a/content/browser/service_worker/service_worker_context_wrapper.cc b/content/browser/service_worker/service_worker_context_wrapper.cc
-index 9aba6deb9e11ec2803f163088d1c321dd256787f..1dc24bb4c83acd2ff618b085059c918261b2a3d4 100644
+index 654219d75727c189d377cf14e25a8abdc1002204..3e243964f429c3afcb874b208c672991dd3468bf 100644
 --- a/content/browser/service_worker/service_worker_context_wrapper.cc
 +++ b/content/browser/service_worker/service_worker_context_wrapper.cc
-@@ -1616,6 +1616,28 @@ ServiceWorkerContextWrapper::GetLoaderFactoryForBrowserInitiatedRequest(
+@@ -1649,6 +1649,28 @@ ServiceWorkerContextWrapper::GetLoaderFactoryForBrowserInitiatedRequest(
        loader_factory_bundle_info =
            context()->loader_factory_bundle_for_update_check()->Clone();
  
@@ -40,7 +40,7 @@ index 9aba6deb9e11ec2803f163088d1c321dd256787f..1dc24bb4c83acd2ff618b085059c9182
    if (base::FeatureList::IsEnabled(
            features::kEnableServiceWorkersForChromeUntrusted) &&
        scope.scheme_piece() == kChromeUIUntrustedScheme) {
-@@ -1636,9 +1658,7 @@ ServiceWorkerContextWrapper::GetLoaderFactoryForBrowserInitiatedRequest(
+@@ -1669,9 +1691,7 @@ ServiceWorkerContextWrapper::GetLoaderFactoryForBrowserInitiatedRequest(
              browser_context(), scope_origin)) {
        config->RegisterURLDataSource(browser_context());
  

patches/chromium/desktop_media_list.patch

@@ -82,10 +82,10 @@ index 1e4a652634fbde2ca9a256baca840bbc5a0e001f..546f5bc3a2f79035f0eec196d9e704b8
    const Source& GetSource(int index) const override;
    DesktopMediaList::Type GetMediaListType() const override;
 diff --git a/chrome/browser/media/webrtc/native_desktop_media_list.cc b/chrome/browser/media/webrtc/native_desktop_media_list.cc
-index 6d8c9d940bb4488ffedc1eb8c543c065bb3953c9..d5092cb0245a4b8dc26073741f0bc6657b943bdd 100644
+index d2297c082f482219f35c3acf5bcc8dadf18bbafb..97b1589793962b2b601a78ef5118256903ee65f9 100644
 --- a/chrome/browser/media/webrtc/native_desktop_media_list.cc
 +++ b/chrome/browser/media/webrtc/native_desktop_media_list.cc
-@@ -127,8 +127,9 @@ BOOL CALLBACK AllHwndCollector(HWND hwnd, LPARAM param) {
+@@ -139,8 +139,9 @@ BOOL CALLBACK AllHwndCollector(HWND hwnd, LPARAM param) {
  #endif  // BUILDFLAG(IS_WIN)
  
  #if BUILDFLAG(IS_MAC)
@@ -96,7 +96,7 @@ index 6d8c9d940bb4488ffedc1eb8c543c065bb3953c9..d5092cb0245a4b8dc26073741f0bc665
  #endif
  
  }  // namespace
-@@ -415,6 +416,9 @@ void NativeDesktopMediaList::Worker::RefreshNextThumbnail() {
+@@ -427,6 +428,9 @@ void NativeDesktopMediaList::Worker::RefreshNextThumbnail() {
        FROM_HERE,
        base::BindOnce(&NativeDesktopMediaList::UpdateNativeThumbnailsFinished,
                       media_list_));
@@ -106,7 +106,7 @@ index 6d8c9d940bb4488ffedc1eb8c543c065bb3953c9..d5092cb0245a4b8dc26073741f0bc665
  }
  
  void NativeDesktopMediaList::Worker::OnCaptureResult(
-@@ -628,6 +632,11 @@ void NativeDesktopMediaList::RefreshForVizFrameSinkWindows(
+@@ -642,6 +646,11 @@ void NativeDesktopMediaList::RefreshForVizFrameSinkWindows(
          FROM_HERE, base::BindOnce(&Worker::RefreshThumbnails,
                                    base::Unretained(worker_.get()),
                                    std::move(native_ids), thumbnail_size_));

patches/chromium/disable-redraw-lock.patch

@@ -15,7 +15,7 @@ the redraw locking mechanism, which fixes these issues. The electron issue
 can be found at https://github.com/electron/electron/issues/1821
 
 diff --git a/ui/views/win/hwnd_message_handler.cc b/ui/views/win/hwnd_message_handler.cc
-index 2b69f4767e9073ea5f12acddf842c7f1dc82e2c1..a2f053c3e2588451458682aa6e86da52a591e1e7 100644
+index 2d21f2e408004fbaf6a19980ad5daf47493aec65..c6a0ac1c5dd98a41392bd170bb0ada7418f17453 100644
 --- a/ui/views/win/hwnd_message_handler.cc
 +++ b/ui/views/win/hwnd_message_handler.cc
 @@ -308,6 +308,10 @@ constexpr int kSynthesizedMouseMessagesTimeDifference = 500;
@@ -29,15 +29,17 @@ index 2b69f4767e9073ea5f12acddf842c7f1dc82e2c1..a2f053c3e2588451458682aa6e86da52
  // A scoping class that prevents a window from being able to redraw in response
  // to invalidations that may occur within it for the lifetime of the object.
  //
-@@ -359,6 +363,7 @@ class HWNDMessageHandler::ScopedRedrawLock {
+@@ -358,7 +362,8 @@ class HWNDMessageHandler::ScopedRedrawLock {
+         hwnd_(owner_->hwnd()),
          cancel_unlock_(false),
          should_lock_(owner_->IsVisible() && !owner->HasChildRenderingWindow() &&
-                      ::IsWindow(hwnd_) &&
-+                     !owner_->HasNativeFrame() &&
+-                     ::IsWindow(hwnd_) && !owner_->IsHeadless() &&
++                     ::IsWindow(hwnd_) && !owner_->HasNativeFrame() &&
++                     !owner_->IsHeadless() &&
                       (!(GetWindowLong(hwnd_, GWL_STYLE) & WS_CAPTION) ||
                        !ui::win::IsAeroGlassEnabled())) {
      if (should_lock_)
-@@ -986,6 +991,10 @@ HWNDMessageHandler::RegisterUnadjustedMouseEvent() {
+@@ -1051,6 +1056,10 @@ HWNDMessageHandler::RegisterUnadjustedMouseEvent() {
    return scoped_enable;
  }
  
@@ -49,10 +51,10 @@ index 2b69f4767e9073ea5f12acddf842c7f1dc82e2c1..a2f053c3e2588451458682aa6e86da52
  // HWNDMessageHandler, gfx::WindowImpl overrides:
  
 diff --git a/ui/views/win/hwnd_message_handler.h b/ui/views/win/hwnd_message_handler.h
-index f4efdc7174b90e57fb332f031530545e493a2e0d..9d45f97b930831a703efab2bbdf10afb61140c7f 100644
+index 73337f6b14516f93500705606c89e4c7b5a55f35..6badb272496a630031592372c1a766a9d70bb26a 100644
 --- a/ui/views/win/hwnd_message_handler.h
 +++ b/ui/views/win/hwnd_message_handler.h
-@@ -205,6 +205,8 @@ class VIEWS_EXPORT HWNDMessageHandler : public gfx::WindowImpl,
+@@ -207,6 +207,8 @@ class VIEWS_EXPORT HWNDMessageHandler : public gfx::WindowImpl,
    using TouchIDs = std::set<DWORD>;
    enum class DwmFrameState { kOff, kOn };
  

patches/chromium/disable_color_correct_rendering.patch

@@ -20,10 +20,10 @@ to deal with color spaces. That is being tracked at
 https://crbug.com/634542 and https://crbug.com/711107.
 
 diff --git a/cc/trees/layer_tree_host_impl.cc b/cc/trees/layer_tree_host_impl.cc
-index f3f1d19619717f0f0493ab1ec90f47fd16bdd574..10bdf83528295d50cde496ade386a3546aa7bfc2 100644
+index 691496d0ca6fce79c26b9da7322856b3bf06332f..4aadafbba17578cfa26a111eecd0cfaad676326d 100644
 --- a/cc/trees/layer_tree_host_impl.cc
 +++ b/cc/trees/layer_tree_host_impl.cc
-@@ -1880,6 +1880,9 @@ void LayerTreeHostImpl::SetIsLikelyToRequireADraw(
+@@ -1853,6 +1853,9 @@ void LayerTreeHostImpl::SetIsLikelyToRequireADraw(
  TargetColorParams LayerTreeHostImpl::GetTargetColorParams(
      gfx::ContentColorUsage content_color_usage) const {
    TargetColorParams params;
@@ -34,7 +34,7 @@ index f3f1d19619717f0f0493ab1ec90f47fd16bdd574..10bdf83528295d50cde496ade386a354
    // If we are likely to software composite the resource, we use sRGB because
    // software compositing is unable to perform color conversion.
 diff --git a/cc/trees/layer_tree_settings.h b/cc/trees/layer_tree_settings.h
-index f6094a5defe12c34564020b0779626b3e5bff99e..a068a9ba33d3f8c8cdc74ae63ab5e16caa0b90c3 100644
+index 5eaf2d9cab94def423be78b414179e6ccc596437..1ca8b5968350e88761d9ebc073fe8c573d0f3b5d 100644
 --- a/cc/trees/layer_tree_settings.h
 +++ b/cc/trees/layer_tree_settings.h
 @@ -93,6 +93,8 @@ class CC_EXPORT LayerTreeSettings {
@@ -47,7 +47,7 @@ index f6094a5defe12c34564020b0779626b3e5bff99e..a068a9ba33d3f8c8cdc74ae63ab5e16c
    // Image Decode Service and raster tiles without images until the decode is
    // ready.
 diff --git a/components/viz/common/display/renderer_settings.h b/components/viz/common/display/renderer_settings.h
-index 8b0b5eda59c863efb6f4c67636810871677894c5..eea098eab3c2a5c36fab1a71d888e562e8f93da5 100644
+index bc48a50a7664f12a454997db54d893cde9b04881..810a8ce52bf9ac74f47a710f8b332980754996f5 100644
 --- a/components/viz/common/display/renderer_settings.h
 +++ b/components/viz/common/display/renderer_settings.h
 @@ -24,6 +24,7 @@ class VIZ_COMMON_EXPORT RendererSettings {
@@ -59,7 +59,7 @@ index 8b0b5eda59c863efb6f4c67636810871677894c5..eea098eab3c2a5c36fab1a71d888e562
    bool force_antialiasing = false;
    bool force_blending_with_shaders = false;
 diff --git a/components/viz/host/renderer_settings_creation.cc b/components/viz/host/renderer_settings_creation.cc
-index 6a830ec9f29b9764cd425f0681dafbb18d90b457..a7a095ceb9e626c79db21e0d16c8ef47da860679 100644
+index 9d34ced366026eb7cdd00ce40a4eb1af56180d39..abf67f8246bfa37df08cd2216c388dd316fb6499 100644
 --- a/components/viz/host/renderer_settings_creation.cc
 +++ b/components/viz/host/renderer_settings_creation.cc
 @@ -17,6 +17,7 @@
@@ -79,159 +79,11 @@ index 6a830ec9f29b9764cd425f0681dafbb18d90b457..a7a095ceb9e626c79db21e0d16c8ef47
    renderer_settings.partial_swap_enabled =
        !command_line->HasSwitch(switches::kUIDisablePartialSwap);
  
-diff --git a/components/viz/service/display/gl_renderer.cc b/components/viz/service/display/gl_renderer.cc
-index 7fb664525ba696626544c8b09597105bff874c05..b987d649ef84451a9d3e5c2f87da3eb06c19c4d6 100644
---- a/components/viz/service/display/gl_renderer.cc
-+++ b/components/viz/service/display/gl_renderer.cc
-@@ -87,6 +87,9 @@
- 
- using gpu::gles2::GLES2Interface;
- 
-+#define PATCH_CS(color_space) \
-+  (settings_->enable_color_correct_rendering ? color_space : gfx::ColorSpace())
-+
- namespace viz {
- namespace {
- 
-@@ -685,8 +688,9 @@ void GLRenderer::DoDrawQuad(const DrawQuad* quad,
- void GLRenderer::DrawDebugBorderQuad(const DebugBorderDrawQuad* quad) {
-   SetBlendEnabled(quad->ShouldDrawWithBlending());
- 
--  SetUseProgram(ProgramKey::DebugBorder(), gfx::ColorSpace::CreateSRGB(),
--                CurrentRenderPassColorSpace());
-+  SetUseProgram(ProgramKey::DebugBorder(),
-+                PATCH_CS(gfx::ColorSpace::CreateSRGB()),
-+                PATCH_CS(CurrentRenderPassColorSpace()));
- 
-   // Use the full quad_rect for debug quads to not move the edges based on
-   // partial swaps.
-@@ -1676,7 +1680,8 @@ void GLRenderer::ChooseRPDQProgram(DrawRenderPassDrawQuadParams* params,
-           params->use_color_matrix, tint_gl_composited_content_,
-           params->apply_shader_based_rounded_corner &&
-               ShouldApplyRoundedCorner(params->quad)),
--      params->contents_and_bypass_color_space, target_color_space);
-+          PATCH_CS(params->contents_and_bypass_color_space),
-+          PATCH_CS(target_color_space));
- }
- 
- void GLRenderer::UpdateRPDQUniforms(DrawRenderPassDrawQuadParams* params) {
-@@ -2149,7 +2154,8 @@ void GLRenderer::DrawSolidColorQuad(const SolidColorDrawQuad* quad,
-   SetUseProgram(ProgramKey::SolidColor(use_aa ? USE_AA : NO_AA,
-                                        tint_gl_composited_content_,
-                                        ShouldApplyRoundedCorner(quad)),
--                CurrentRenderPassColorSpace(), CurrentRenderPassColorSpace());
-+                PATCH_CS(CurrentRenderPassColorSpace()),
-+                PATCH_CS(CurrentRenderPassColorSpace()));
- 
-   gfx::ColorSpace quad_color_space = gfx::ColorSpace::CreateSRGB();
-   SkColor4f color_f = SkColor4f::FromColor(color);
-@@ -2157,7 +2163,7 @@ void GLRenderer::DrawSolidColorQuad(const SolidColorDrawQuad* quad,
-   // Apply color transform if the color space or source and target do not match.
-   if (quad_color_space != CurrentRenderPassColorSpace()) {
-     const gfx::ColorTransform* color_transform =
--        GetColorTransform(quad_color_space, CurrentRenderPassColorSpace());
-+        GetColorTransform(PATCH_CS(quad_color_space), PATCH_CS(CurrentRenderPassColorSpace()));
-     gfx::ColorTransform::TriStim col(color_f.fR, color_f.fG, color_f.fB);
-     color_transform->Transform(&col, 1);
-     color_f.fR = col.x();
-@@ -2379,7 +2385,8 @@ void GLRenderer::DrawContentQuadAA(const ContentDrawQuadBase* quad,
-                                               : NON_PREMULTIPLIED_ALPHA,
-                        false, false, tint_gl_composited_content_,
-                        ShouldApplyRoundedCorner(quad)),
--      quad_resource_lock.color_space(), CurrentRenderPassColorSpace());
-+      PATCH_CS(quad_resource_lock.color_space()),
-+      PATCH_CS(CurrentRenderPassColorSpace()));
- 
-   if (current_program_->tint_color_matrix_location() != -1) {
-     auto matrix = cc::DebugColors::TintCompositedContentColorTransformMatrix();
-@@ -2478,7 +2485,8 @@ void GLRenderer::DrawContentQuadNoAA(const ContentDrawQuadBase* quad,
-                        !quad->ShouldDrawWithBlending(), has_tex_clamp_rect,
-                        tint_gl_composited_content_,
-                        ShouldApplyRoundedCorner(quad)),
--      quad_resource_lock.color_space(), CurrentRenderPassColorSpace());
-+      PATCH_CS(quad_resource_lock.color_space()),
-+      PATCH_CS(CurrentRenderPassColorSpace()));
- 
-   if (current_program_->tint_color_matrix_location() != -1) {
-     auto matrix = cc::DebugColors::TintCompositedContentColorTransformMatrix();
-@@ -2588,7 +2596,8 @@ void GLRenderer::DrawYUVVideoQuad(const YUVVideoDrawQuad* quad,
-   // The source color space should never be RGB.
-   DCHECK_NE(src_color_space, src_color_space.GetAsFullRangeRGB());
- 
--  gfx::ColorSpace dst_color_space = CurrentRenderPassColorSpace();
-+  gfx::ColorSpace dst_color_space =
-+      PATCH_CS(CurrentRenderPassColorSpace());
- 
- #if BUILDFLAG(IS_WIN)
-   // Force sRGB output on Windows for overlay candidate video quads to match
-@@ -2769,7 +2778,8 @@ void GLRenderer::DrawStreamVideoQuad(const StreamVideoDrawQuad* quad,
- 
-   SetUseProgram(ProgramKey::VideoStream(tex_coord_precision,
-                                         ShouldApplyRoundedCorner(quad)),
--                lock.color_space(), CurrentRenderPassColorSpace());
-+                PATCH_CS(lock.color_space()),
-+                PATCH_CS(CurrentRenderPassColorSpace()));
- 
-   DCHECK_EQ(GL_TEXTURE0, GetActiveTextureUnit(gl_));
-   gl_->BindTexture(GL_TEXTURE_EXTERNAL_OES, lock.texture_id());
-@@ -2840,8 +2850,8 @@ void GLRenderer::FlushTextureQuadCache(BoundGeometry flush_binding) {
-       draw_cache_.nearest_neighbor ? GL_NEAREST : GL_LINEAR);
- 
-   // Bind the program to the GL state.
--  SetUseProgram(draw_cache_.program_key, locked_quad.color_space(),
--                CurrentRenderPassColorSpace(),
-+  SetUseProgram(draw_cache_.program_key, PATCH_CS(locked_quad.color_space()),
-+                PATCH_CS(CurrentRenderPassColorSpace()),
-                 /*adjust_src_white_level=*/draw_cache_.is_video_frame,
-                 locked_quad.hdr_metadata());
- 
-@@ -3698,7 +3708,9 @@ void GLRenderer::SetUseProgram(const ProgramKey& program_key_no_color,
-                                const gfx::ColorSpace& dst_color_space,
-                                bool adjust_src_white_level,
-                                absl::optional<gfx::HDRMetadata> hdr_metadata) {
--  DCHECK(dst_color_space.IsValid());
-+  if (settings_->enable_color_correct_rendering) {
-+    DCHECK(dst_color_space.IsValid());
-+  }
-   gfx::ColorSpace adjusted_src_color_space = src_color_space;
-   if (adjust_src_white_level && src_color_space.IsHDR()) {
-     // TODO(b/183236148): consider using the destination's HDR static metadata
-@@ -4084,9 +4096,9 @@ void GLRenderer::CopyRenderPassDrawQuadToOverlayResource(
-         cc::MathUtil::CheckedRoundUp(iosurface_height, iosurface_multiple);
-   }
- 
--  *overlay_texture =
--      FindOrCreateOverlayTexture(params.quad->render_pass_id, iosurface_width,
--                                 iosurface_height, RootRenderPassColorSpace());
-+  *overlay_texture = FindOrCreateOverlayTexture(
-+      params.quad->render_pass_id, iosurface_width, iosurface_height,
-+      PATCH_CS(RootRenderPassColorSpace()));
-   *new_bounds = gfx::RectF(updated_dst_rect.origin(),
-                            gfx::SizeF((*overlay_texture)->texture.size()));
- 
-@@ -4305,8 +4317,9 @@ void GLRenderer::FlushOverdrawFeedback(const gfx::Rect& output_rect) {
- 
-   PrepareGeometry(SHARED_BINDING);
- 
--  SetUseProgram(ProgramKey::DebugBorder(), gfx::ColorSpace::CreateSRGB(),
--                CurrentRenderPassColorSpace());
-+  SetUseProgram(ProgramKey::DebugBorder(),
-+                PATCH_CS(gfx::ColorSpace::CreateSRGB()),
-+                PATCH_CS(CurrentRenderPassColorSpace()));
- 
-   gfx::Transform render_matrix;
-   render_matrix.Translate(0.5 * output_rect.width() + output_rect.x(),
-@@ -4512,3 +4525,5 @@ bool GLRenderer::ColorTransformKey::operator<(
- }
- 
- }  // namespace viz
-+
-+#undef PATCH_CS
 diff --git a/content/browser/gpu/gpu_process_host.cc b/content/browser/gpu/gpu_process_host.cc
-index 11e2a00aaffeba9379c0f2c41e6300d3020c7a88..9cfd058861a506bc3d6f72e5ed4a37b60ff4454b 100644
+index d3375aa2370158888d35e064b9613cd696d4b45b..a7a33cfd499925c23a26a6dacc5add3d4c462d78 100644
 --- a/content/browser/gpu/gpu_process_host.cc
 +++ b/content/browser/gpu/gpu_process_host.cc
-@@ -227,6 +227,7 @@ GpuTerminationStatus ConvertToGpuTerminationStatus(
+@@ -228,6 +228,7 @@ GpuTerminationStatus ConvertToGpuTerminationStatus(
  
  // Command-line switches to propagate to the GPU process.
  static const char* const kSwitchNames[] = {
@@ -240,10 +92,10 @@ index 11e2a00aaffeba9379c0f2c41e6300d3020c7a88..9cfd058861a506bc3d6f72e5ed4a37b6
      sandbox::policy::switches::kGpuSandboxAllowSysVShm,
      sandbox::policy::switches::kGpuSandboxFailuresFatal,
 diff --git a/content/browser/renderer_host/render_process_host_impl.cc b/content/browser/renderer_host/render_process_host_impl.cc
-index 0c8d0735523d388d0e68d2ad0b20a1c2525502ed..089b8e85776874938cfdafad0c3576562a78c1b0 100644
+index e186644f7592f7d0e827b7d8af6c31951738f6f5..5e8df8f92729ba851fe7ba8557e309a32899df93 100644
 --- a/content/browser/renderer_host/render_process_host_impl.cc
 +++ b/content/browser/renderer_host/render_process_host_impl.cc
-@@ -198,6 +198,7 @@
+@@ -199,6 +199,7 @@
  #include "ui/accessibility/accessibility_switches.h"
  #include "ui/base/ui_base_switches.h"
  #include "ui/display/display_switches.h"
@@ -251,7 +103,7 @@ index 0c8d0735523d388d0e68d2ad0b20a1c2525502ed..089b8e85776874938cfdafad0c357656
  #include "ui/gl/gl_switches.h"
  #include "url/gurl.h"
  #include "url/origin.h"
-@@ -3217,6 +3218,7 @@ void RenderProcessHostImpl::PropagateBrowserCommandLineToRenderer(
+@@ -3173,6 +3174,7 @@ void RenderProcessHostImpl::PropagateBrowserCommandLineToRenderer(
    // Propagate the following switches to the renderer command line (along
    // with any associated values) if present in the browser command line.
    static const char* const kSwitchNames[] = {
@@ -260,7 +112,7 @@ index 0c8d0735523d388d0e68d2ad0b20a1c2525502ed..089b8e85776874938cfdafad0c357656
      sandbox::policy::switches::kDisableSeccompFilterSandbox,
      sandbox::policy::switches::kNoSandbox,
 diff --git a/third_party/blink/renderer/platform/graphics/canvas_color_params.cc b/third_party/blink/renderer/platform/graphics/canvas_color_params.cc
-index 648f25d99884b99f49e26cd9f280a8a6ae63e1c7..0f87961ecd8c24e3ba82c6bae187a12c9b112bd4 100644
+index 75d7af9a79d4e7f2cd39e45496ab5fff66407638..b4ddafdd126edd16172f00448bbbd56eaf509b1f 100644
 --- a/third_party/blink/renderer/platform/graphics/canvas_color_params.cc
 +++ b/third_party/blink/renderer/platform/graphics/canvas_color_params.cc
 @@ -4,6 +4,7 @@
@@ -292,7 +144,7 @@ index 648f25d99884b99f49e26cd9f280a8a6ae63e1c7..0f87961ecd8c24e3ba82c6bae187a12c
  }
  
 diff --git a/third_party/blink/renderer/platform/widget/compositing/layer_tree_settings.cc b/third_party/blink/renderer/platform/widget/compositing/layer_tree_settings.cc
-index 4187a703f62f36ff14d3a95f4b116febd5242c09..8d3b82e802bbd011380df21915427aba26193952 100644
+index 4f3b9b181b1998e0ebbd95955feeec28a5d6bcb7..00f2a213cded1985b3131fabf3560937c56f6ffd 100644
 --- a/third_party/blink/renderer/platform/widget/compositing/layer_tree_settings.cc
 +++ b/third_party/blink/renderer/platform/widget/compositing/layer_tree_settings.cc
 @@ -24,6 +24,7 @@
@@ -303,7 +155,7 @@ index 4187a703f62f36ff14d3a95f4b116febd5242c09..8d3b82e802bbd011380df21915427aba
  #include "ui/native_theme/native_theme_features.h"
  #include "ui/native_theme/overlay_scrollbar_constants_aura.h"
  
-@@ -183,6 +184,9 @@ cc::LayerTreeSettings GenerateLayerTreeSettings(
+@@ -178,6 +179,9 @@ cc::LayerTreeSettings GenerateLayerTreeSettings(
    settings.main_frame_before_activation_enabled =
        cmd.HasSwitch(cc::switches::kEnableMainFrameBeforeActivation);
  
@@ -314,7 +166,7 @@ index 4187a703f62f36ff14d3a95f4b116febd5242c09..8d3b82e802bbd011380df21915427aba
    // is what the renderer uses if its not threaded.
    settings.enable_checker_imaging =
 diff --git a/ui/gfx/mac/io_surface.cc b/ui/gfx/mac/io_surface.cc
-index e36187917ecec5d9e40009d1c394a07e72281919..de9698d577ab48358d06362fc78575fd0ad98d30 100644
+index e030f01e72d18ef08d04ffbc72a5abb9a7b485c5..25155263bede8a465eb3f3bc2960f173c8f14935 100644
 --- a/ui/gfx/mac/io_surface.cc
 +++ b/ui/gfx/mac/io_surface.cc
 @@ -20,6 +20,7 @@
@@ -332,7 +184,7 @@ index e36187917ecec5d9e40009d1c394a07e72281919..de9698d577ab48358d06362fc78575fd
 +  auto* cmd_line = base::CommandLine::ForCurrentProcess();
 +  if (cmd_line->HasSwitch(switches::kDisableColorCorrectRendering)) {
 +    base::ScopedCFTypeRef<CFDataRef> system_icc(
-+        CGColorSpaceCopyICCProfile(base::mac::GetSystemColorSpace()));
++        CGColorSpaceCopyICCData(base::mac::GetSystemColorSpace()));
 +    IOSurfaceSetValue(io_surface, CFSTR("IOSurfaceColorSpace"), system_icc);
 +    return true;
 +  }
@@ -340,7 +192,7 @@ index e36187917ecec5d9e40009d1c394a07e72281919..de9698d577ab48358d06362fc78575fd
    // Allow but ignore invalid color spaces.
    if (!color_space.IsValid())
      return true;
-@@ -312,6 +321,15 @@ IOSurfaceRef CreateIOSurface(const gfx::Size& size,
+@@ -311,6 +320,15 @@ IOSurfaceRef CreateIOSurface(const gfx::Size& size,
      DCHECK_EQ(kIOReturnSuccess, r);
    }
  
@@ -348,14 +200,14 @@ index e36187917ecec5d9e40009d1c394a07e72281919..de9698d577ab48358d06362fc78575fd
 +  if (cmd_line->HasSwitch(switches::kDisableColorCorrectRendering)) {
 +    CGColorSpaceRef color_space = base::mac::GetSystemColorSpace();
 +    base::ScopedCFTypeRef<CFDataRef> color_space_icc(
-+        CGColorSpaceCopyICCProfile(color_space));
++        CGColorSpaceCopyICCData(color_space));
 +    IOSurfaceSetValue(surface, CFSTR("IOSurfaceColorSpace"), color_space_icc);
 +    return surface;
 +  }
 +
    // Ensure that all IOSurfaces start as sRGB.
-   if (__builtin_available(macos 10.12, *)) {
-     IOSurfaceSetValue(surface, CFSTR("IOSurfaceColorSpace"), kCGColorSpaceSRGB);
+   IOSurfaceSetValue(surface, CFSTR("IOSurfaceColorSpace"), kCGColorSpaceSRGB);
+ 
 diff --git a/ui/gfx/switches.cc b/ui/gfx/switches.cc
 index 0e8044c6d87008c51fd165c6ef8bdc3687d6cc29..78015868927602b5225f252f0a9182f61b8431dc 100644
 --- a/ui/gfx/switches.cc

patches/chromium/disable_compositor_recycling.patch

@@ -6,19 +6,19 @@ Subject: fix: disabling compositor recycling
 Compositor recycling is useful for Chrome because there can be many tabs and spinning up a compositor for each one would be costly. In practice, Chrome uses the parent compositor code path of browser_compositor_view_mac.mm; the NSView of each tab is detached when it's hidden and attached when it's shown. For Electron, there is no parent compositor, so we're forced into the "own compositor" code path, which seems to be non-optimal and pretty ruthless in terms of the release of resources. Electron has no real concept of multiple tabs per window, so it should be okay to disable this ruthless recycling altogether in Electron.
 
 diff --git a/content/browser/renderer_host/render_widget_host_view_mac.mm b/content/browser/renderer_host/render_widget_host_view_mac.mm
-index c37193c2207fb4f20993a35e2ac6fde8f0727a45..8e81312b1424d37c756bbb93cb4020a693c9b380 100644
+index 19396ba065ebab86903e2d52dc72d22de9d6bc89..fdb09a51829db40f4bcba71e76cd0dcef16a47ad 100644
 --- a/content/browser/renderer_host/render_widget_host_view_mac.mm
 +++ b/content/browser/renderer_host/render_widget_host_view_mac.mm
-@@ -531,7 +531,11 @@
-       browser_compositor_->GetDelegatedFrameHost()->HasSavedFrame();
-   if (has_saved_frame)
-     TRACE_EVENT_BEGIN("cc", "RWHVMac::WasOccluded with saved frame");
+@@ -511,7 +511,11 @@
+     return;
+ 
+   host()->WasHidden();
 -  browser_compositor_->SetRenderWidgetHostIsHidden(true);
 +  // Consider the RWHV occluded only if it is not attached to a window
 +  // (e.g. unattached BrowserView). Otherwise we treat it as visible to
 +  // prevent unnecessary compositor recycling.
 +  const bool unattached = ![GetInProcessNSView() window];
 +  browser_compositor_->SetRenderWidgetHostIsHidden(unattached);
-   if (has_saved_frame)
-     TRACE_EVENT_END("cc");
  }
+ 
+ void RenderWidgetHostViewMac::SetSize(const gfx::Size& size) {