The current wording "This module is used for writing unit tests for your applications, you can access it with require('assert')." implies that this module should only be used in development while unit testing.
The article "Error Handling in Node.js" by Joyent (https://www.joyent.com/developers/node/design/errors) uses the assert module in an efficient way to validate required function arguments.
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25786
This change is a backport of 2b4b6006607c33a5699ec53afaf40f987dc11895
from io.js.
Original commit message:
This test was failing because the spawned process was terminated
before anything could be done, by calling child.stdin.end. With this
change, the child's stdin is no longer closed. When the stdin is not
a tty, io.js waits for the whole input before starting, so the child
must be run with --interactive to process the command sent by the
parent. The child is killed explicitly by the parent before it exits.
This test was failing silently because the asserts were not called if
nothing was received from the child. This fix moves assertOutputLines
to always run on exit.
Fixes: https://github.com/nodejs/io.js/issues/2177
Refs: https://github.com/nodejs/io.js/issues/2094
PR-URL: https://github.com/nodejs/io.js/pull/2186
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Johan Bergström <bugs@bergstroem.nu>
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25748
Since install is per machine only, installation path should be stored
in local machine instead of current user. The registry stores HKLM in
different places for 32 and 64 bit applications, so the installer will
not suggest the old path when upgrading from 32 to 64 bit version.
Fixes#5592Fixes#25087
PR-URL: https://github.com/joyent/node/pull/25640
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
Reviewed-By: Bert Belder <bertbelder@gmail.com>
The MSI install scope was set to the WiX default, which is per-user.
However, with UAC, it could not be installed by a standard user because
InstallPrivileges is elevated by default, hence the install scope
should be set to per-machine. Furthermore, the default install path is
a per-machine location and setting the system path requires
administrator privileges.
By changing the InstallScope to perMachine, Start Menu shortcuts are
placed in ProgramData and not the installing user's AppData folder,
making the shortcuts available to other users. This also fixes the
installation when AppData is a network folder.
The custom action is necessary to allow upgrades. Since a per-machine
MSI cannot upgrade an application installed per-user, the custom action
checks if there is going to be an upgrade to a previous version
installed per-user and sets the installation as per-user to allow
upgrading. Hence, the advantages of installing per-machine will only
apply in fresh installations.
Fixes#5849Fixes#7629
PR-URL: https://github.com/joyent/node/pull/25640
Reviewed-By: Alexis Campailla <alexis@janeasystems.com>
Reviewed-By: Bert Belder <bertbelder@gmail.com>
Add a configuration flag that prevents mdb_v8.so from being built.
The default behavior is still the same and mdb_v8.so is built by default
on Solaris based platforms such as SmartOS.
Using --without-mdb fixes build issues on Solaris based platforms where
libproc.h is not available or not compatible with the one shipped by
SmartOS.
Fixes#6439.
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/25707
Adding support for specifying flaky test mode to
the test runner:
- via an environment variable FLAKY_TESTS for Makefile
- via an argument ignore-flaky for vcbuild.bat
Conflicts:
Makefile
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/25653
Made explicitely clear that when size bytes are not available, it will
return null, unless we've ended, in which case the data remaining in the
buffer will be returned.
Fixes#7273
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25592
The documentation for createWriteStream() references an
'encoding' property that has a default value of null. However,
this property is never referenced by createWriteStream() or
WritableState(). Instead a 'defaultEncoding' property is
referenced in WritableState() with a default of 'utf8' if no value
is supplied.
This fix updates the documentation to rename the 'encoding'
property to 'defaultEncoding' and indicate its default value of
'utf8'.
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25565
This reverts commit 67d9a56251.
This commit actually reverts both
67d9a56251 and
02a549ed2b (both related to ciphers list
changes). It does it in one commit because reverting
02a549ed2b results in an empty commit.
These changes are not yet ready to be released, and before they are we
want to be able to publish new releases. We're reverting them so that we
can submit a new PR that will contain all these changes plus what's
necessary to be able to land them properly.
Conflicts:
src/node.cc
PR: #25511
PR-URL: https://github.com/joyent/node/pull/25511
Reviewed-By: Shigeki Ohtsu <ohtsu@iij.ad.jp>
Test of 512 bits key is failed after upgrading openssl-1.0.1o due to
its limit of 768 bits key size. Remove it and start from 1024 bits
test.
Reviewed-By: Michael Dawson <mdawson@devrus.com>
PR-URL: https://github.com/joyent/node/pull/25533
When a timer is added in another timer's callback, its underlying timer
handle will be started with a timeout that is actually incorrect.
The reason is that the value that represents the current time is not
updated between the time the original callback is called and the time
the added timer is processed by timers.listOnTimeout. That leads the
logic in timers.listOnTimeout to do an incorrect computation that makes
the added timer fire with a timeout of scheduledTimeout +
timeSpentInCallback.
This change fixes that and make timers scheduled within other timers'
callbacks fire as expected.
Fixes#9333 and #15447.
PR: #17203
PR-URL: https://github.com/joyent/node/pull/17203
Reviewed-By: Fedor Indutny <fedor@indutny.com>
A deadlock happens when sampler initiated by SIGPROF tries to lock
the thread and the thread is already locked by the same thread. As
a result, other thread involved in sampling process hangs. The
patch adds a check for thread lock before continuing sampler
operation.
The fix has been tested on a sample app under load with and without
profiling turned on.
Fixes issue #14576 and specifically the duplicate issue #25295
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/25309
The third sentence of the fifth paragraph of the documentation for
transform._transform() has several words omitted and makes no
sense. This fix fills in the missing words to clarify the passage.
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25371
This improves the performance of openssl s_client on Windows and
gains several seconds to finish test-tls-server-verify.
(cherry picked from commit 2ff517e0e410ea33ba5a3d289a82fc315d120e8e)
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25368
In openssl s_client on Windows, RAND_screen() is invoked to initialize
random state but it takes several seconds in each connection.
This added -no_rand_screen to openssl s_client on Windows to skip
RAND_screen() and gets a better performance in the unit test of
test-tls-server-verify.
Do not enable this except to use in the unit test.
(cherry picked from commit 9f0f7c38e6df975dd39735d0e9ef968076369c74)
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25368
For better performance of the test, the parent kills child processes
so as not to wait them to be ended.
(cherry picked from commit 833b23636045f7afc929196139021630a390391a)
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25368
When running in parallel, it is not easy to identify what server and
client failed when the test fails. This adds identifiers to all lines
of console output.
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25368
OpenSSL s_client introduces some delay on Windows. With all clients
running sequentially, this delay is big enough to break CI. This fix runs
the clients in parallel (unless the test includes renegotiation),
reducing the total run time.
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25368
Issue: https://github.com/joyent/node/issues/25348
The gyp/project files don't explicitly specify a subsystem version,
which results in the default being used. The default changed from
VS 2010 to VS 2012 and later.
Backport e8d08503c7821e8c92e9fa236ed7328e9bdfe62a from io.js.
Original commit message follows:
Chrome still runs on Windows XP, so there is no reason that iojs
couldn't.
PR: https://github.com/iojs/io.js/pull/512
(cherry picked from commit e8d08503c7821e8c92e9fa236ed7328e9bdfe62a)
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/25367
The Node 0.12 line was initially released with a version
of v8 that included Array.prototype.values(). In
https://github.com/joyent/node/pull/18206, v8 was
updated to a version that dropped support for values().
https://codereview.chromium.org/647703003 removed this
method because it causes problems with some versions of
Outlook Web Access. This commit reverts the removal of
Array.prototype.values().
Original commit message:
Revert "Version 3.28.71.17 (merged r24706, r24708)"
This reverts commit 529541ecb58fd0d6df4dfbe41d01bff9ae21ff06.
Conflicts:
src/version.cc
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/25328
With additional load in the system, the child process which runs sleep
command takes more time to run - typically slightly above 1 second,
but above 2 seconds under stress.
While the intent of the test is to test the functionality of spawnSync
and the child process in general, in effect it is testing the system
command sleep, and further, it's responsiveness.
Since from the name the purpose of the test seems to be unrelated to
the sleep behaviour, I believe a more meaningful assertion would be to
see the time taken is more than 1 second.
Reviewed-By: Michael Dawson <mhdawsonibm@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25291
This test currently fails when run on machines without
IPv6 enabled. Futher it was delete in io.js under
3143d732f6efd82da76e9c53ad192ac14071bf70 as the test
was known to have problems across platforms and
releases.
The existing test was hard to understand so I wrote
a new version but then found exactly what was
reported in the io.js pull request. Behaviour varies
across platforms such that writing a solid test would
either be infeasible or test so little that
it does not seem to make sense to keep it.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25326
* V8: update to 3.28.71.19
* uv: upgrade to 1.5.0
* npm: upgrade to 2.9.1
* V8: don't busy loop in v8 cpu profiler thread (Mike Tunnicliffe)
* V8: fix issue with let bindings in for loops (adamk)
* debugger: don't spawn child process in remote mode (Jackson Tian)
* net: do not set V4MAPPED on FreeBSD (Julien Gilli)
* repl: make 'Unexpected token' errors recoverable (Julien Gilli)
* src: backport ignore ENOTCONN on shutdown race (Ben Noordhuis)
* src: fix backport of SIGINT crash fix on FreeBSD (Julien Gilli)
Revert "disable RC4, add --cipher-list command line switch" and
"tls: make --enable-legacy-cipher-list=val less verbose"
This reverts commit f9291a9449 and
b5737bb977.
There is still some work to be done to guarantee secure defaults and a
smooth upgrade path for v0.12.x users. Before this work is finished, we
want to be able to release new versions of v0.12.x. So instead of
waiting for these changes to be ready to ship, revert them and integrate
them when they're ready to be shipped.
Conflicts:
src/node.cc
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25296
Fix the regexp used to detect 'Unexpected token' errors so that they can
be considered as recoverable. This fixes the following use case:
> var foo = 'bar \
... baz';
undefined
> foo
'bar baz'
>
Fixes#8874
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/8875
Backport 668bde8ac0d16382cbc98c904d8b5f55fd9fd9f0 from io.js.
Original commit message follows:
In theory the msi should broadcast a 'WM_SETTINGCHANGE' message to all
windows after modifying the PATH environment variable. This ensures that
the new PATH is visible to other processes without restarting windows
(although it's still necessary to close and reopen active console
windows).
Unfortunately, the broadcast doesn't always happen, for unknown reasons.
That's why this patch adds a custom action that unconditionally
broadcasts a WM_SETTINGCHANGE message.
Bug: https://github.com/iojs/io.js/issues/603
PR: https://github.com/iojs/io.js/pull/613
Reviewed-by: Bert Belder <bertbelder@gmail.com>
(cherry picked from commit 668bde8ac0d16382cbc98c904d8b5f55fd9fd9f0)
--Node.js commmit metadata--
PR-URL: https://github.com/joyent/node/pull/25100
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
Fixes: https://github.com/joyent/node/issues/4356
The loopback on AIX is slower by default than on other platforms
and we've seen a number of tests fail on AIX for this reason. This
looks to be another instance. Changing the test to bind to the
host ip instead of the loopback makes it pass reliably.
This change extends the timeout so that it passes reliably on AIX
even with the slower loopback behaviour
modified: test/simple/test-tls-wrap-timeout.js
Reviewed-By: coln Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/25138
When running make test-npm, make would use the node binary available in
the PATH, which would most of the time not be the same binary as the one
built from the source tree from where the make test-npm command in run.
This can be confusing, as it can lead users to think that they tested
npm with the version of node that was built from the current checkout of
the source tree when it would actually run the tests with a completely
different version.
This change modifies the PATH environment variable for all commands that
need to run the node binary to run npm's tests by adding the root of the
local checkout as the first entry, so that the custom built node is
always used.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/9107
072460265226c047369558b23e9ff2748965bf6c floats a patch on V8 that fixes
issue #9113 that would cause let bindings and continue statements in for
loops to not work properly.
This change adds a regression test that fails if that patch is not
properly floated, thus preventing us from not floating that patch after
future V8 upgrades.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/23948
Backport b17eaaa5755e625493c5fe537f42b58838923c52 from upstream v8.
Original commit message:
Fix desugaring of let bindings in for loops to handle continue properly
This requires putting the original loop's body inside an inner for loop (with
the same labels as the original loop) and re-binding the temp variables in its
"next" expression. A second flag is added to the desugared code to ensure the
loop body executes at most once per loop.
BUG=v8:3683
LOG=y
Review URL: https://codereview.chromium.org/720863002
Cr-Commit-Position: refs/heads/master@{#25363}
Fixes#9113 and #14411.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/23948
Backport 2ad2237507c5b5f9047b8d94d2f4997327eae852 from V8.
Original commit message:
Fix Unhandled ReferenceError in debug-debugger.js
This fixes following exception in Sky on attempt to set a breakpoint
"Unhandled: Uncaught ReferenceError: break_point is not defined"
I think this happens in Sky but not in Chrome because Sky scripts are executed in strict mode.
BUG=None
LOG=N
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/741683002
Cr-Commit-Position: refs/heads/master@{#25415}
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
PR-URL: https://github.com/joyent/node/pull/18206
vcbuild.bat calls python configure before setting GYP_MSVS_VERSION,
so SelectVisualStudioVersion (tools\gyp\pylib\gyp\MSVSVersion.py)
defaults to 'auto' and selects VS 2005.
vcbuild sets the environment in the current shell, so this issue
would manifest itself only on the first invocation of the script
in any given shell windows.
Reviewed-By: Julien Gilli <jgilli@fastmail.fm>
PR-URL: https://github.com/joyent/node/pull/20109
61fe1fe21b backported
b64983d77cc3ed2e4b585f3bfc8ed23802389a52 from io.js, but failed to
change nullptr to NULL, which lead to a build break on FreeBSD since the
current build system doesn't enable support for C++11.
This change replaces nullptr by NULL, and has been tested on
FreeBSD 10.1-RELEASE-p8.
Fixes#9326.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/14819
When debug in remote mode with host:port or pid, the interface
spawn child process also. If the debugger agent is running, will
get following output:
```
< Error: listen EADDRINUSE :::5858
< at Object.exports._errnoException (util.js:734:11)
< at exports._exceptionWithHostPort (util.js:757:20)
< at Agent.Server._listen2 (net.js:1155:14)
< at listen (net.js:1181:10)
< at Agent.Server.listen (net.js:1268:5)
< at Object.start (_debug_agent.js:21:9)
< at startup (node.js:68:9)
< at node.js:799:3
```
This fix won't spawn child process and no more error message was
shown.
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/14172
This is a backport of ea37ac04f4e4e9248fb361d65a3cd69f57bcaba1
Original commit message:
On AIX, OS X and the BSDs, calling shutdown() on one end of a pipe
when the other end has closed the connection fails with ENOTCONN.
The sequential/test-child-process-execsync test failed sporadically
because of a race between the parent and the child where one closed
its end of the pipe before the other got around to calling shutdown()
on its end of the pipe.
Libuv is not the right place to handle that because it can't tell if
the ENOTCONN error is genuine but io.js can.
Refs: libuv/libuv#268
PR-URL: iojs#1214
Reviewed-By: Bert Belder <bertbelder@gmail.com>
Fixes: https://github.com/joyent/node/issues/9444.
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/14480
simple/test-child-process-stdout-flush-exit.js fails with an assertion.
The root cause for this assertion is that the expected boolean value of
true for the variable gotBye was false. This is set to true when the
piped stdout stream of the child writes the end token "goodbye". So the
error message would indicate that the end token was never received by
the parent, but in fact it did. The only difference is that the first
chunk itself had both 'hello' and 'goodbye' (as well as the filler
words in between) in AIX, while Linux receives them separately.
While this issue is not reproducible in Linux, the number of bytes
received each time a callback is called is not consistent across runs,
which is ratified as the actual content size of a UNIX domain data packet
is determined outside of the node's logic, instead in OS tunables, as well
as the runtime context of data transfer (depending on contigeous free
memory available in OS data structures at the time of sending).
In addition, around 200 filler words sent in between the 'hello' and
'goodbye' seem to indicate that the coalescence of chunks was a possibility
in Linux as well, and was devised to separate the first word from the last,
through an arbitrary delimiter.
Parser logic seem to be rigid and have assumptions about the order and size
of the data arrival. For example, it checks for 'goodbye' only when it does
not find 'hello' in it, as if they would always come separately. This
exclusiveness is what makes the test to fail in AIX.
Reviewed-By:
PR-URL: https://github.com/joyent/node/pull/14410
Add command line switches and environment variables to override
the default cipher suite in tls.js
`--cipher-list` and `NODE_CIPHER_LIST` can be used to completely
override the default cipher list with a given value.
`--enable-legacy-cipher-list` and `NODE_LEGACY_CIPHER_LIST` can
be used to reset the default cipher list back to a known legacy
value shipped in prior Node.js releases
A new `getLegacyCiphers` method on the tis module allows
programmatic access to the old cipher list defaults.
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/14383
Disable RC4 in the default cipher list
Add the `--cipher-list` command line switch and `NODE_CIPHER_LIST`
environment variable to completely override the default cipher list.
Add the `--enable-legacy-cipher-list` and `NODE_LEGACY_CIPHER_LIST`
environment variable to selectively enable the default cipher list from
previous node.js releases.
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/14414
Disable RC4 in the default cipher list
Add the `--cipher-list` command line switch and `NODE_CIPHER_LIST`
environment variable to completely override the default cipher list.
Add the `--enable-legacy-cipher-list` and `NODE_LEGACY_CIPHER_LIST`
environment variable to selectively enable the default cipher list from
previous node.js releases.
Reviewed-By: James M Snell <jasnell@gmail.com>
PR-URL: https://github.com/joyent/node/pull/14413
In Linux, simple/test-child-process-fork-net2.js fails intermittently.
In SuSE Linux system, under network high load situations, this failure is
consistently reproducible.
The test case tests whether the TCP connections which were established between
the processes terminate in a timely and clean manner. After some iterations of
data transfer on established connections, the server is closed. The server does
not get closed immediately, instead waits for all the active connections to
terminate. A timed (200ms) callback closes the connections, which eventually
closes the server.
The start is the time when the server close is invoked.
The end is the time when the server is actually closed(onClose call back invoked).
Given that there is a minimum delay of 200ms before the connections are
terminated, expecting the elapsed time above 190 is reasonable and fair,
but looks like the leeway of 800ms for the upper bounds seem to be too
stringent, and breaking some scenarios of network load.
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
PR-URL: https://github.com/joyent/node/pull/14129
simple tests test-cluster-master-error.js, test-cluster-master-kill.js
fails in AIX with assertion failure indicating that the workers were
alive even after the master terminated. A 200ms leeway is provided for
the workers to actually terminate, but the isAlive check returns
true in both the cases.
In AIX, the workers were actually terminating, but they took more time
- as much as 800ms (normal) to 1000ms (in rare cases).
Based on a C test we ran, it is found that the exit routines in AIX
is a bit more longer than that in Linux. There are a number of cleanup
activities performed in exit() system call, and depending on when the
signal handlers are shutdown in that sequence, the process will be
deemed as dead or alive, from another process's perspective.
process.kill(pid) is used in the test case to check the liveliness of
the worker, and when the kill() call is issued, even if the target
process is in it's exit sequences, if the signal handlers are not shut
down, it will respond to external signals, causing those calls to pass.
This fix extends the additional timeout for all platforms
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
PR-URL: https://github.com/joyent/node/pull/9431
This change is a backport of 1a3ca8223e08d82051655d7d7e2ea31b439f1bf1
from io.js.
Original commit message:
Read all pending data out of the socket on `error` event and ensure that
no `data`/`end` handlers will be invoked on `socket.destroy()`.
Otherwise following assertion happens:
AssertionError: null == true
at TLSSocket.socketOnData (_http_client.js:308:3)
at TLSSocket.emit (events.js:107:17)
at TLSSocket.Readable.read (_stream_readable.js:373:10)
at TLSSocket.socketCloseListener (_http_client.js:229:10)
at TLSSocket.emit (events.js:129:20)
at TCP.close (net.js:476:12)
Fix: https://github.com/joyent/node/issues/9348
PR-URL: https://github.com/iojs/io.js/pull/1103
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-By: Nicu Micleușanu <micnic90@gmail.com>
Fixes#9348.
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/14087
simple tests test-http-request-end.js, test-http-default-encoding.js
hangs in AIX. The root cause for both the failures is related to the
timing with which packets are sent between the client and server.
On the client side, one factor that affects the timing is Nagle's
algorithm. With Nagle enabled there may be a delay between two packets
as the stack may wait until either:
a. An acknowledgement for the first packet is received, or
b. 200 ms elapses.
before sending the second packet.
Similarly at the server side 2 sequential packages can be delivered to
the application either together or separatly.
On AIX we see that they are delivered separately to the server, while on
Linux delivered together. If we change the timing, for example disabling
Nagle on AIX we see the 2 packets delivered together and the tests pass.
In the test case simple/test-http-request-end.js, the client request
handler of the server receives and stores the data in a data callback,
closes the server in a request end callback, and writes to the client
and ends the response, in-line with the request receipt. An HTTP parser
module parses the incoming message, and invokes callback routines which
are registered for HTTP events (such as header, body, end etc.)
Because the termination sequence arrive in a separate packet, there is a
delay in parsing that message and identify that the client request ended
(and thereby invoke the request end call backhandler). Due to this delay,
the response close happens first, which in-turn destroys the server
socket leading to the fd and watcher removal from the uv loop abandoning
further events on this connection, and end call back never being called,
causing the reported hang. simple/test-http-default-encoding.js suffers
from the same problem.
Also, remove the timer logic from the test case. Test harness anyways
contain a timer which controls the individual tests so remove such
controls from the test case, as suggested by @tjfontaine
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
PR-URL: https://github.com/joyent/node/pull/9432
At the uv layer pipes are connected with uv_pipe_connect.
The current spec for this method indicates that the maximum
length is limited to the size of length of
sizeof(sockaddr_un.sun_path), typically between 92 and
108 bytes. Anything longer than that just gets truncated.
The simple testsuite currently creates pipes in directories
under the directory where node was built. In our jenkins
jobs this sometimes ends up being a deep enough path that
the path for the pipes is getting truncated. The result
is that tests using pipes fail with errors that don't
make it obvious what the problem is.
Even if the errors were helpful, we still need a way
to avoid the truncation.
This patch adds the environment variable NODE_PIPE_DIR.
If set the tests create pipes in this directory instead of
the current defaults. In addition the test harness is
updated to remove/delete this directory before/after
each test is run.
modified: test/common.js
modified: test/simple/test-net-pipe-connect-errors.js
modified: test/testpy/__init__.py
modified: test/simple/test-cluster-eaccess.js
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/9381
Improve performance by:
+ Not leaking the `arguments` object!
+ Getting the last character of a string by index, instead of
with `.substr()` or `.slice()`
Improve code consistency by:
+ Using `[]` instead of `.charAt()` where possible
+ Using a function declaration instead of a var declaration
+ Using `.slice()` with clearer arguments
+ Checking if `dir` is truthy in `win32.format`
(added tests for this)
Improve both by:
+ Making the reusable `trimArray()` function
+ Standardizing getting certain path statistics with
the new `win32StatPath()` function
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/9289
sha256-x86_64.pl does not exist in the origin openssl distribution. It
was copied from sha512-x86_64.pl and both sha256/sha512 scripts were
modified so as to generates only one asm file specified as its key
hash length.
PR: #9451
PR-URL: https://github.com/joyent/node/pull/9451
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
Switch from running the loop with UV_RUN_ONCE to UV_RUN_DEFAULT, because
it's possible that the poll returns earlier than expected and thus the
timer is not run on a single interation.
The loop is not stopped either from the timer callback or from the async
handle's.
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/9410
sha256-x86_64.pl does not exist in the origin openssl distribution. It
was copied from sha512-x86_64.pl and both sha256/sha512 scripts were
modified so as to generates only one asm file specified as its key
hash length.
PR: #9451
PR-URL: https://github.com/joyent/node/pull/9451
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
Original commit message:
darwin: fix size calculation in select() fallback
Apple's `fd_set` stores its bits in an array of 32-bit integers, which
means `FD_ISSET()` may read out of bounds if we allocate storage at
byte granularity. There's also a chance that the `select()` call could
corrupt the heap, although I didn't investigate that.
This issue was discovered by LLVM's AddressSanitizer which caught
`FD_ISSET()` trying to read out of bounds.
Ref: https://github.com/libuv/libuv/pull/241
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/9179
Float patch to fix setsockopt for multicast on Solaris and derivatives.
Original commit message:
solaris: fix setsockopt for multicast options
On Solaris and derivatives such as SmartOS, the length of socket options
for multicast and ttl options is not always sizeof(char).
This fixes the udp_options and udp_options6 tests.
Ref: https://github.com/libuv/libuv/pull/243
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/9179
Float patch to fix pipe on Windows. Original commit message:
win: fix pipe blocking writes
In the code path for pipe blocking writes, WriteFile is already
posting a completion packet to the I/O completion port.
POST_COMPLETION_FOR_REQ was causing the same request to get
returned twice by GetCompletionStatusEx.
Also on the same code path, we were waiting on the wrong event.
We need to update queued_bytes and write_queue_size when a
blocking write request completes asynchronously.
Ref: https://github.com/libuv/libuv/pull/238
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/9179
process.send() should be synchronous, it should block until the message
has been sent in full, but it wasn't after the second-to-last libuv
upgrade because of commit libuv/libuv@393c1c5 ("unix: set non-block
mode in uv_{pipe,tcp,udp}_open"), which made its way into io.js in
commit 07bd05b ("deps: update libuv to 1.2.1").
Commit libuv/libuv@b36d4ff ("unix: implement uv_stream_set_blocking()")
as landed in io.js in commit 9681fca ("deps: update libuv to 1.4.0")
makes it possible to restore the synchronous behavior again and that's
precisely what this commit does.
The same line of reasoning applies to `net.Socket({ fd: 1 })`: creating
a socket object from a stdio file descriptor, like the `process.stdout`
getter does, should put the file descriptor in blocking mode for
compatibility reasons.
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
PR-URL: https://github.com/joyent/node/pull/9179
'.' and '..' are directory specs and resolving urls with or without the
hostname with '.' and '..' should add a trailing slash to the end of the
url.
Fixes#8992.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
PR-URL: https://github.com/joyent/node/pull/9427
When slicing global pool - ensure that the underlying buffer's data ptr
is 8-byte alignment to do not ruin expectations of 3rd party C++ addons.
NOTE: 0.10 node.js always returned aligned pointers and v0.12 should do
this too for compatibility.
PR-URL: https://github.com/joyent/node/pull/9375
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
caeb67735b introduced a regression where
the domains stack would not be cleared after an error had been handled
by the top-level domain.
This change clears the domains stack regardless of the position of the
active domain in the stack.
PR: #9364
PR-URL: https://github.com/joyent/node/pull/9364
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
This reverts commit ad0684807c.
Initially, this bug fix targeted master, and I pushed to have it
included in v0.10. In retrospect, I'm not sure it should have made into
v0.10 as it seems it could break a lot of existing working code.
In my opinion, this change is still a bug fix, and it is not backward
incompatible per se. However, I'm not sure that taking the risk to break
a lot of users with a new 0.10.x release that would include this fix is
reasonable, especially now that 0.10.x releases are entering
maintenance mode.
PR-URL: https://github.com/joyent/node/pull/9257
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
A significant performance regressions has been introduced in 1fddc1f for
GET requests which send data through response.end(). The number of
requests per second dropped to somewhere around 6% of their previous
level.
The fix consists of removing a part of the lines added by 1fddc1f,
lines which were supposed to affect only HEAD requests, but interfered
with GET requests instead.
The lines removed would not have affected the behaviour in the case of
a HEAD request as this._hasBody would always be false. Therefore, they
were not required to fix the issue reported in #8361.
Fixes#8940.
PR: #9026
PR-URL: https://github.com/joyent/node/pull/9026
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
This test setups two event listeners: one on a child process' exit event
, another for the same child process' stdandard output's 'data' event.
The data even listener writes to a stream, and the exit event listener
ends it.
Because the exit event can be emitted before the data event, there is a
chance that something will be written to the stream after it's ended,
and that an error is thrown.
This change makes the test end the stream in the listener for the child
process' standard output's end event, which is guaranteed to be emitted
after the last data event, thus avoiding the race.
PR: #9301
PR-URL: https://github.com/joyent/node/pull/9301
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Michael Dawson <michael_dawson@ca.ibm.com>
Reviewed-By: James M Snell <jasnell@users.noreply.github.com>
Reviewed-By: Bert Belder <bertbelder@gmail.com>
Currently, lib/_tls_legacy.js and lib/crypto.js cannot be loaded when
--use-strict is passed to node. In addition to that, console.trace
throws because it uses arguments.callee.
This change fixes these issues and adds a test that makes sure
every external built-in module can be loaded with require when
--use-strict is enabled.
Please note that this change does not fix all issues with built-in
modules' code running with --use-strict. It is very likely that some
code in the built-in modules still fails when passing this flag.
However, fixing all code would require us to enable strict mode by
default in all builtins modules, which would certainly break existing
applications.
Fixes#9187.
PR: #9237
PR-URL: https://github.com/joyent/node/pull/9237
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
test/simple/test-http-destroyed-socket-write2.js validates
that you get an appropriate error when trying to write to
a request when the response on the other side has been destroyed.
The test uses http.request to get a request and then keeps writing
to it until either it hits 128 writes or gets the expected error.
Since the writes are asynchronous we see that the writes just end
up adding events to the event loop, which then later get processed
once the connection supporting the request is fully ready.
The test is timing dependent and if takes too long for the connection
to be made the limit of 128 writes is exceeded and the test fails.
The fact that the test allows a number of writes is probably to allow
some delay for the connection to be ready for writing.
On AIX, in the default configuration using the loopback interface
is slower and the test fails because the delay is such that many
more writes can be queued up before the connection takes place.
If we use the host ip instead of defaulting to the loopback then
the test passes.
The test needs to be made more robust to delays. Since each write
simply enqueues an additional write to the event queue there is
probably no point in doing the second write until the first has
completed. This patch schedules the next write when the first one
completes and allows the test to pass even if it takes longer for
the connection to be ready for writing
PR-URL: https://github.com/joyent/node/pull/9270
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
In the documentation for querystring.parse, the documentation mentions
that the default value for options.decodeURIComponent is the
decodeURIComponent function, but it's actually the querystring.unescape
function.
PR-URL: https://github.com/joyent/node/pull/9259
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
`TLSSocket` wraps the original `net.Socket`, but writes/reads to/from
`TLSSocket` do not touch the timers of original `net.Socket`.
Introduce `socket._parent` property, and iterate through all parents
to unref timers and prevent timeout event on original `net.Socket`.
Fix: https://github.com/joyent/node/issues/9242
PR-URL: https://github.com/iojs/io.js/pull/891
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This is a backport of 6c3647c38d from
v0.12 to v0.10.
Console.prototype.timeEnd() returns NaN if the timer label
corresponds to a property on Object.prototype. In v0.12, this was fixed
by using Object.create(null) to construct the _times object
However, the version of V8 in the v0.10 branch makes this fix not work
as expected. In v0.10, this commit changes the _times object into a
array of objects of the form:
{ label: someLabel, time: staringWallClockTime }
someLabel can thus be any string, including any string that represents
any Object.prototype field.
Fixes#9116.
PR: #9215
PR-URL: https://github.com/joyent/node/pull/9215
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Server sockets should be shared by default, and client sockets should be
exclusive by default. For net/TCP, this is how it is, for dgram/UDP, its
a little less clear what a client socket is, but a socket that is
auto-bound during a dgram.send() is not usefully shared among cluster
workers, any more than an outgoing TCP connection would be usefully
shared.
Since implicit binds become exclusive, implicit/client dgram sockets can
now be used with cluster on Windows. Before, neither explicit nor
implicitly bound sockets could be used, causing dgram to be completely
unsupported with cluster on Windows. After this change, they become half
supported.
PR: https://github.com/joyent/node/pull/8643
Reviewed-by: Ben Noordhuis <info@bnoordhuis.nl>
Reviewed-by: Bert Belder <bertbelder@gmail.com>
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
Currently, fs.truncate() silently fails when a file descriptor
is passed as the first argument. This commit changes this
behavior to properly call fs.ftruncate().
PR-URL: https://github.com/joyent/node/pull/9161
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
Currently, fs.truncate() silently fails when a file descriptor
is passed as the first argument. This commit changes this
behavior to properly call fs.ftruncate(). This commit also
adds proper type checking to the callback provided to
makeCallback().
PR-URL: https://github.com/joyent/node/pull/9161
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
The commit in v0.10 (431eb172f9) that
backported the original change
(https://codereview.chromium.org/806143002) did add an extra newline
because the logging facilities in v0.10's V8 do not add one.
When merging this commit in v0.12, V8's logging facilities now
automatically add the newline character, and the debug builds assert if
one is already present.
If the Buffer allocation isn't a slice then there's no need to adjust
the pool offset after realloc'ing the space available.
Fixes: 6462519 "buffer, doc: misc. fix and cleanup"
The NativeModule system passes NativeModule.require transparently and so
is unnecessary to call explicitly.
The only one which should have the prefix is the in line 295, where
actually implements a big fs-based module system and actually requires a
native module. That is left unchanged.
PR-URL: https://github.com/joyent/node/pull/9201
Ref: https://github.com/joyent/node/issues/2009
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Timeout#unref() call returns undefined, not this. The test already
worked before, because the interval was still unref'd, and the test also
succeeds without clearing the interval.
PR-URL: https://github.com/joyent/node/pull/9171
Reviewed-by: Colin Ihrig <cjihrig@gmail.com>
Reviewed-by: Timothy J Fontaine <tjfontaine@gmail.com>
A number -> uint32 type coercion bug made buffer sizes
larger than kMaxLength (0x3fffffff) wrap around.
Instead of rejecting the requested size with an exception,
the constructor created a buffer with the wrong size.
PR-URL: https://github.com/iojs/io.js/pull/657
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
AsyncWrap should always properly propagate asynchronous calls to any
child that is created. Regardless whether kCallInitHook is currently
active. The previous logic would always return early if kCallInitHook
wasn't set.
PR-URL: https://github.com/joyent/node/pull/9146
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
V8_CONSTANT_REMOVED_SINCE(major, minor) can be used to mark a constant
has being removed from V8 since V8 version major.minor.
Reviewed-By: Dave Pacheco <dap@joyent.com>
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
Bugs fixed:
* v0.12 and later: in-object properties not printing correctly.
* 64-bit: not printing external strings correctly (offset was hardcoded
for 32-bit). This would happen with "::jsstack -vn0" because the
script "node.js" wasn't printed correctly, at least with 0.10 core
files.
* 64-bit: printing JS source (via "::jsstack -v") emits errors and shows
the wrong code.
* Several build warnings.
* Two-byte strings are unnecessarily truncated.
* Could print friendlier note when given obviously bogus function token
positions.
New features:
* ::jsstack prints much cleaner output by default.
* ::jsprint keys are now quoted.
* ::jsstack -v includes "this" value for each function on the stack.
* ::jsstack -v includes more details about each argument (constructor
names for each object).
* new commands: ::jsconstructor, ::jsfunctions, ::jssource, ::nodebuffer
and ::v8internal.
* ::findjsobjects and ::jsprint hidden flags for developers to measure
and improve test coverage.
* internal jsobj_properties() function is much better documented.
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
Building node with GCC > 4.4 on CentOS makes the node binary depend on a
more recent version of the C/C++ runtime that is not installed by
default on these older CentOS platforms, and probably on other platforms
as well.
Building node with the default gcc and g++ compilers that come with
these older versions of CentOS allows to ship a node binary that runs
out of the box on these setups with older C/C++ runtimes.
This change works around a bug that was fixed in GCC 4.5. Versions of
GCC < 4.5 would not support using the injected-class-name of a
template base class as a type name.
This change also disables aliasing optimizations for toolchains using
GCC <= 4.4 as they're not able to deal with the aliasing in the queue
implementation used by libuv and node (see src/queue.h).
Fixes#9079.
PR: #9098
PR-URL: https://github.com/joyent/node/pull/9098
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
Reviewed-By: Trevor Norris <trev.norris@gmail.com>
Currently, JSON.stringify() is used to create error messages
on failed assertions. This causes an error when stringifying
objects with circular references. This commit switches out
JSON.stringify() for util.inspect(), which can handle
circular references.
PR: #8734
PR-URL: https://github.com/joyent/node/pull/8734
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
This reverts commit d312b6d15c.
d312b6d15c introduced some confusion in
the existing API of url.format and url.parse.
The way the 'path' property overrides other properties in url.format's
input is too confusing for existing users compared to the issues it
fixes.
Fixes such as https://github.com/joyent/node/pull/9081 have been
proposed, but they do not make the API less confusing.
Instead, this change just reverts the original breaking change so that
it gives us more time after v0.12.0 is released to come up with a better
API for url.format, url.parse and other related APIs in the v0.13
development branch.
Fixes#9070.
Conflicts:
doc/api/url.markdown
PR: #9109
PR-URL: https://github.com/joyent/node/pull/9109
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
On Windows, when building the "build-release" rule, enable both small-icu
and download-all.
This change also slightly refactors the build-release rule, mainly so that
it's easier to read.
The resulting MSI package was tested on Windows 7.
Fixes#9099.
PR: #9100
PR-URL: https://github.com/joyent/node/pull/9100
Reviewed-By: Steven R. Loomis <srloomis@us.ibm.com>
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
Make this test less prone to race conditions by using synchronous
interprocess communication instead of a timer to determine when the
child process is ready to receive messages from its parent.
Also, remove a superfluous timer since the tests suite already makes
tests time out after a while.
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
In order to preserve the potential for a flush method being added to the
streams API, rename flush to flushHeaders which is much more clear about
the behavior of this method.
PR: #9048
PR-URL: https://github.com/joyent/node/pull/9048
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
Since the current environment is in scope use ThrowError on that,
instead of having to lookup the Environment again.
Added benefit, lint the source code.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Julien Gilli <julien.gilli@joyent.com>
On non-windows supported platforms, fs.access(readOnlyFile, W_OK, ...)
is expected to fail, but always succeeds if node runs as the super user,
which is often the case for tests running on our continuous integration
platform.
This change makes the test try to change its process user id to nobody
on non-windows platforms so that the above mentioned test can pass and
still perform the actual desired test. If changing the process user id
to a nobody is not possible, then the test checks that
fs.access(readOnlyFile, W_OK, ...) actually succeeds.
Fixes#9033.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
unref one superfluous timer (as the test suite already has a global
timeout), and improve the state machine to iterate the messages more
reliably.
Ultimately make the test complete more quickly.
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
Previously if a worker's state machine had already transitioned into the
'listening' state when it received the message enabling the debugger,
the worker would never enable its debugger.
Change the logic to allow the 'listening' as a valid state for enabling
the debugger.
Fixes#6440
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
In general path functions don't change the case of a path. Making an
exception for windows drive letters violates the principle of least
surprise.
Changing the drive letter case has caused a lot of issues, including
joyent/node#7031, joyent/node#7806 and lots of bikeshedding about
whether uppercase is the right case or lowercase.
This effectively reverts joyent/node@a05f973
Reviewed-by: Alexis Campailla <alexis@janeasystems.com>
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
Invokes the configure script used to build binary packages
(OSX pkg, binary tarballs, pkgsrc, MSI) with --download=all
--with-intl=small-icu.
Also makes PACKAGEMAKER customizable, because PackageMaker is not
necessarily installed in /Developer on OSX anymore.
Tested all binary packages on Windows, OSX, Linux and SmartOS.
Fixes#7676.
Reviewed-by: Steven R. Loomis <srl@icu-project.org>
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
The tests suite available in test/external/ssl-options was originally
written for security fixes made in the v0.10 branch. In this branch, the
client's default ciphers list is compatible with SSLv2.
After merging this change from v0.10 to v0.12, this tests suite was
broken because commits 5d2aef17ee and
f4c8020d10 make SSL/TLS clients use a
default ciphers list that is not compatible with the SSLv2 protocol.
This change fixes two issues:
1) The cipher list that was setup for a given test was not passed
properly to the client.
2) When either or both of clients/servers were using SSLv2, tests were
expected to succeed when at least the server end was using SSLv2
compatible ciphers. Now, tests are expected to succeed only if
SSLv2 compatible ciphers are used on both ends.
Fixes#9020.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
A recent merge of v0.10 to v0.12
(0c7f6ca830) upgraded OpenSSL to version
1.0.1j. In v0.10, this required test-crypto-stream.js to be fixed with
commit 707cc25011. Basically, instead of
returning the proper error, Err_get_error() would return 0 and the test
for the error message needed to be updated in test-crypto-stream.js.
However, in the v0.12 branch, crypto error messages are handled a bit
differently since commit 26a1b712ec
landed. Instead of returning the default OpenSSL error message, it makes
the decipher stream return a default message specific to Node.js.
This commit updates test-crypto-stream.js to test the error object
against the proper default error message.
Fixes#9019.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Workers that are already disconnected but not yet exited should not be
disconnected, trying to do so raises exceptions.
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
- `sh.css` already exists in `api_assets`
- `sh_vim-dark.css` is unused, but used in the repo `node-website`
now
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
Backport 10703774f0 from the v0.12 branch.
Currently, the test-child-process-spawn-typeerror.js is
calling execFile() on a JavaScript source file, which is
causing failures on Windows. This commit switches to calling
spawn() on an actual executable.
Fixes#8930.
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
child_process.spawn's argument parsing is stricter in v0.12 than in
v0.10. Changes in tests merged from v0.10 that relied on the less-strict
argument parsing would fail. This change updates the test so that it
makes sure that the stricter argument parsing fails as expected.
This change also fixes a small typo introduced during the conflicts
resolution of said merge.
fs.exists() and fs.existsSync() do not follow the typical error first
callback convention. access() and accessSync() are added as alternatives
in this commit.
PR-URL: https://github.com/joyent/node/pull/8714
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Currently, the test-child-process-spawn-typeerror.js is
calling execFile() on a JavaScript source file, which is
causing failures on Windows. This commit switches to calling
spawn() on an actual executable.
Reviewed-by: Sam Roberts <sam@strongloop.com>
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
Some tests that rely on some environment variables being passed to child
processes would fail because they reset the child processes'
environement instead of appending to it. This would break on test
environments where some custom environment variables are needed to make
node work properly.
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reduce the overhead of the CPU profiler by replacing sched_yield() with
nanosleep() in V8's tick event processor thread. The former only yields
the CPU when there is another process scheduled on the same CPU.
Before this commit, the thread would effectively busy loop and consume
100% CPU time. By forcing a one nanosecond sleep period rounded up to
the task scheduler's granularity (about 50 us on Linux), CPU usage for
the processor thread now hovers around 10-20% for a busy application.
PR-URL: https://github.com/joyent/node/pull/8789
Ref: https://github.com/strongloop/strong-agent/issues/3
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
The latest merge resulted in uv__loop_configure being defined twice on
Windows. This changes removes one of these duplicates to fix the build
on this platform.
If the data length passed to smalloc.alloc() the array_length will be
zero, causing an overflow check to fail. This prevents that from
happening.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Make "--with-intl=none" the default and add "intl-none" option to
vcbuild.bat.
If icu data is missing print a warning unless either --download=all or
--download=icu is set. If set then automatically download, verify (MD5)
and unpack the ICU data if not already available.
There's a "list" of URLs being used, but right now only the first is
picked up. The logic works something like this:
* If there is no directory deps/icu,
* If no zip file (currently icu4c-54_1-src.zip),
* Download zip file (icu-project.org -> sf.net)
* Verify the MD5 sum of the zipfile
* If bad, print error and exit
* Unpack the zipfile into deps/icu
* If deps/icu now exists, use it, else fail with help text
Add the configuration option "--with-icu-source=..."
Usage:
* --with-icu-source=/path/to/my/other/icu
* --with-icu-source=/path/to/icu54.zip
* --with-icu-source=/path/to/icu54.tgz
* --with-icu-source=http://example.com/icu54.tar.bz2
Add the configuration option "--with-icu-locals=...". Allows choosing
which locales are used in the "small-icu" case.
Example:
configure --with-intl=small-icu --with-icu-locales=tlh,grc,nl
(Also note that as of this writing, neither Klingon nor Ancient Greek
are in upstream CLDR data. Serving suggestion only.)
Don't use hard coded ../../out paths on windows. This was suggested by
@misterdjules as it causes test failures. With this fix, "out" is no
longer created on windows and the following can run properly:
python tools/test.py simple
Reduce space by about 1MB with ICU 54 (over without this patch). Also
trims a few other source files, but only conditional on the exact ICU
version used. This is to future-proof - a file that is unneeded now may
be needed in future ICUs.
Also:
* Update distclean to remove icu related files
* Refactor some code into tools/configure.d/nodedownload.py
* Update docs
* Add test
PR-URL: https://github.com/joyent/node/pull/8719
Fixes: https://github.com/joyent/node/issues/7676#issuecomment-64704230
[trev.norris@gmail.com small change to test's whitespace and logic]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
The url.parse() function now checks whether an escapable character is in
the URL before trying to escape it.
PR-URL: https://github.com/joyent/node/pull/8638
[trev.norris@gmail.com: Switch to use continue instead of if]
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Commit 934bfe23a1 had introduced a
regression where node would crash trying to access a null unref timer if
a given unref timer's callback would remove other unref timers set to
fire in the future.
More generally, it makes the unrefTimeout function more solid by not
mutating the unrefList while traversing it.
Fixes#8897.
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
This change fixes a regression introduced by commit
0d051238be, which contained a typo that
would cause every unrefd interval to fire only once.
Fixes#8900.
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
Reviewed-By: Colin Ihrig <cjihrig@gmail.com>
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Add documentation for the callback parameter of http.ClientRequest's and
http.ServerResponse's end methods.
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
In cases where many small writes are made to a stream
lacking _writev, the array data structure backing the
WriteReq buffer would greatly increase GC pressure.
Specifically, in the fs.WriteStream case, the
clearBuffer routine would only clear a single WriteReq
from the buffer before exiting, but would cause the
entire backing array to be GC'd. Switching to [].shift
lessened pressure, but still the bulk of the time was
spent in memcpy.
This replaces that structure with a linked list-backed
queue so that adding and removing from the queue is O(1).
In the _writev case, collecting the buffer requires an
O(N) loop over the buffer, but that was already being
performed to collect callbacks, so slowdown should be
neglible.
PR-URL: https://github.com/joyent/node/pull/8826
Reviewed-by: Timothy J Fontaine <tjfontaine@gmail.com>
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Fix a Windows-only build error that was introduced in
commit 1183ba4 ("zlib: support concatenated gzip files").
Rename the NO_ERROR and FAILED enumerations, they conflict
with macros of the same name in <winerror.h>.
PR-URL: https://github.com/joyent/node/pull/8893
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Reviewed-By: Rod Vagg <rod@vagg.org>
Reviewed-by: Timothy J Fontaine <tjfontaine@gmail.com>
Original commit message:
Fix Unhandled ReferenceError in debug-debugger.js
This fixes following exception in Sky on attempt to set a breakpoint
"Unhandled: Uncaught ReferenceError: break_point is not defined"
I think this happens in Sky but not in Chrome because Sky scripts are executed in strict mode.
BUG=None
LOG=N
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/741683002
Cr-Commit-Position: refs/heads/master@{#25415}
Before this change, _unrefActive would keep the unrefList sorted when
adding a new timer.
Because _unrefActive is called extremely frequently, this linear scan
(O(n) at worse) would make _unrefActive show high in the list of
contributors when profiling CPU usage.
This commit changes _unrefActive so that it doesn't try to keep the
unrefList sorted. The insertion thus happens in constant time.
However, when a timer expires, unrefTimeout has to go through the whole
unrefList because it's not ordered anymore.
It is usually not large enough to have a significant impact on
performance because:
- Most of the time, the timers will be removed before unrefTimeout is
called because their users (sockets mainly) cancel them when an I/O
operation takes place.
- If they're not, it means that some I/O took a long time to happen, and
the initiator of subsequents I/O operations that would add more timers
has to wait for them to complete.
With this change, _unrefActive does not show as a significant
contributor in CPU profiling reports anymore.
Fixes#8160.
PR-URL: #8751
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
ICU support in v0.12 generates a new icu_config.gypi. This was
accidentally committed after switching branches. The file has been removed
and added to .gitignore.
Fixes: 0d051238 "timers: fix unref() memory leak"
Previously, 'configure' would not return an exit status
if gyp blows up. This can be tested via:
date >> node.gyp ; ./configure && echo A-OK
You will get "A-OK" even though gyp had failed.
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
The original documentation was slightly confusing. It seemed that the
list of items described the properties of the urlObj object, while it
was actually describing the formatting process. This change makes this
clearer.
Fixes#8796.
Reviewed-by: Chris Dickinson <christopher.s.dickinson@gmail.com>
Documentation mentioned 'securityOptions', where it should have read
'secureOptions'.
Fixes#8608.
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
Dtrace probes were removed from libuv recently, but their usage by node
was not completely removed, causing build breaks on SmartOS.
Even though the build is working on other platforms, these probes are
not fired by libuv anymore, so there's no point in using them on these
platforms too.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Code examples in documentation for net.createServer and
net.createConnection contained confusing log messages. This change makes
them clearer.
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
Currently there's an example using http.ServerResponse stream, which
has a known bug and will not throw an error while writing after end().
Changed to a writable stream from fs which behaves as expected.
fix#8814
Signed-off-by: Julien Gilli <julien.gilli@joyent.com>
In `tls.markdown`, there was a misuse of 'a' which has been replaced
with 'an'.
In `timers.markdown`...
line 31: misuse of 'a', replaced with 'an'
line 59: unclear wording, haywire 'a', added new comma
Call a user-defined callback at specific points in the lifetime of an
asynchronous event. Which are on instantiation, just before/after the
callback has been run.
**If any of these callbacks throws an exception, there is no forgiveness
or recovery. A message will be displayed and a core file dumped.**
Currently these only tie into AsyncWrap, meaning no call to a hook
callback will be made for timers or process.nextTick() events. Though
those will be added in a future commit.
Here are a few notes on how to make the hooks work:
- The "this" of all event hook callbacks is the request object.
- The zero field (kCallInitHook) of the flags object passed to
setupHooks() must be set != 0 before the init callback will be called.
- kCallInitHook only affects the calling of the init callback. If the
request object has been run through the create callback it will always
run the before/after callbacks. Regardless of kCallInitHook.
- In the init callback the property "_asyncQueue" must be attached to
the request object. e.g.
function initHook() {
this._asyncQueue = {};
}
- DO NOT inspect the properties of the object in the init callback.
Since the object is in the middle of being instantiated there are some
cases when a getter is not complete, and doing so will cause Node to
crash.
PR-URL: https://github.com/joyent/node/pull/8110
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
Reviewed-by: Alexis Campailla <alexis@janeasystems.com>
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
When instantiating a new AsyncWrap allow the parent AsyncWrap to be
passed. This is useful for cases like TCP incoming connections, so the
connection can be tied to the server receiving the connection.
Because the current architecture instantiates the *Wrap inside a
v8::FunctionCallback, the parent pointer is currently wrapped inside a
new v8::External every time and passed as an argument. This adds ~80ns
to instantiation time.
A future optimization would be to add the v8::External as the data field
when creating the v8::FunctionTemplate, change the pointer just before
making the call then NULL'ing it out afterwards. This adds enough code
complexity that it will not be attempted until the current approach
demonstrates it is a bottle neck.
PR-URL: https://github.com/joyent/node/pull/8110
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
Reviewed-by: Alexis Campailla <alexis@janeasystems.com>
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
Instead of simply creating a new v8::Object to contain the connection
information, instantiate a new instance of a FunctionTemplate. This will
allow future improvements for debugging and performance probes.
Additionally, the "provider" argument in the ReqWrap constructor is no
longer optional.
PR-URL: https://github.com/joyent/node/pull/8110
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
Reviewed-by: Alexis Campailla <alexis@janeasystems.com>
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
C++ won't deoptimize like JS if specific conditional branches are
sporadically met in the future. Combined with the amount of code
duplication removal and simplified maintenance complexity, it makes more
sense to merge MakeCallback and MakeDomainCallback.
Additionally, type casting in V8 before verifying what that type is will
cause V8 to abort in debug mode if that type isn't what was expected.
Fix this by first checking the v8::Value before casting.
PR-URL: https://github.com/joyent/node/pull/8110
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
Reviewed-by: Alexis Campailla <alexis@janeasystems.com>
Reviewed-by: Julien Gilli <julien.gilli@joyent.com>
Adding --flaky-tests option, to allow regarding flaky tests failures
as non-fatal.
Currently only observed by the TapProgressIndicator, which will
add a # TODO directive to tests classified as flaky. According to the
TAP specification, the test harness is supposed to treat failures
that have a # TODO directive as non-fatal.
In very unlikely case, where `deflateInit2()` may return error (right
now happening only on exhausting all memory), the `ZCtx::Error()` will
be called and will try to `Unref()` the handle. But the problem is that
this handle was never `Ref()`ed, so it will trigger an assertion error
and crash the program.
Reviewed-By: Ben Noordhuis <info@bnoordhuis.nl>
PR-URL: https://github.com/joyent/node/pull/8687
Remove unneeded functionality and tweak the generated output so we
can #include it in C++ source code.
This is a back-port of commit e159073 from the master branch.
It was my mistake to change an assert check. This changes it back to how
the assert was originally done.
Fixes: c131c1f "modules: adding load linked modules feature"
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
- introduced NM_F_LINKED flag to identify linked modules
- setting node_is_initialized after calling V8::Initialize in order to
make the right decision during initial module registration
- introduced modlist_linked in order to track modules that were
pre-registered in order to complete it once node is initialized
- completing registration of linked module similarly to the way it's
done inside DLOpen
PR-URL: https://github.com/joyent/node/pull/8386
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
In 59658a8de7
the return of uv_thread_self() was changed from unsigned long to
uv_thread_t.
uv_thread_t is a HANDLE (pointer-sized) on Windows, which means that
on Win64 it cannot be stored with CRYPTO_THREADID_set_numeric without
data loss.
Furthermore, without this change there will be a build break on Windows
when the libuv change is integrated into Node, because of the
conversion from HANDLE to unsigned long.
Other related commits:
5845a6bcd5919d8ec63a
Should work in all platforms and it fixes this compilation problem
on OSX:
../src/node_crypto.cc:154:3: error: no matching function for call to
'CRYPTO_THREADID_set_numeric'
CRYPTO_THREADID_set_numeric(tid, uv_thread_self());
^~~~~~~~~~~~~~~~~~~~~~~~~~~
../deps/openssl/openssl/include/openssl/../../crypto/crypto.h:435:6:
note: candidate function not viable: no known conversion from
'uv_thread_t' (aka '_opaque_pthread_t *') to 'unsigned long'
for 2nd argument
void CRYPTO_THREADID_set_numeric(CRYPTO_THREADID *id, unsigned
long val);
^
1 error generated.
PR-URL: https://github.com/joyent/node/pull/8785
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
The normalizeArray() function now avoids using the slow Array#splice()
method to improve performance and now also filters out empty path parts.
Code that pre-filtered empty parts has been removed.
PR-URL: https://github.com/joyent/node/pull/8724
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
- Add hyperlinks from spawn options to subsections detailing what
those options do.
- Clarify some verbiage around ChildProcess.prototype.std{in,out,err}.
- Remove second-person pronoun.
PR-URL: https://github.com/joyent/node/pull/8639
Reviewed-by: Chris Dickinson <christopher.s.dickinson@gmail.com>
execFile and spawn have same API signature with respect to optional arg
array and optional options object, they should have same behaviour with
respect to argument validation.
PR-URL: https://github.com/joyent/node/pull/8454
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
The test wasn't checking directly that an assertion was thrown. Instead,
it was checking that spawn did not sucessfully spawn a non-existent
command.
However, the command chosen, dir, exists in GNU coreutils, so it exists
on Linux (though not on BSD derived OS X). The test as written passed on
Linux, even with the TypeError it is supposed to be checking for deleted
from spawn(). It would also pass on Windows if a ls.exe existed.
The approach is unnecessarily obscure, assert.throw() is for asserting
code throws, using it is more clear and works regardless of what
commands do or do not exist.
PR-URL: https://github.com/joyent/node/pull/8454
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
So what I did here is to make the icutools library actually contain the
entire ICU dependencies needed for host-side tools. Sadly, this will
build ICU twice, but avoids conflicts between host and target side.
This all seems like a gyp bug of some sort, but without docs for
toolsets, who’s to say?
I removed the icuio library as a separate target, because it was only
used by the host-side tools.
PR-URL: https://github.com/joyent/node/pull/8681
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Revert uv_thread_self() to return unsigned long instead of uv_thread_t.
This was causing a build failure on Windows and is only a temporary fix
until the proper patch lands upstream.
Reverts: https://github.com/joyent/libuv/commit/59658a8
Fixes: ce112c2 "deps: update uv to v1.0.0-rc2"
Add a test that goes through the whole matrix of:
- command line options (--enable-ssl*)
- secureOptions
- secureProtocols
and makes sure that compatible test setups actually work as expected.
The test works by spawning two processes for each test case: one client
and one server. The test passes if a SSL/TLS connection from the client
to the server is successful and the test case was supposed to pass, or
if the connection couldn't be established and the test case was supposed
to fail.
The test is currently located in the directory 'test/external' because
it has external dependencies.
* openssl: Update to 1.0.1j (Addressing multiple CVEs)
* uv: Update to v0.10.29
* child_process: properly support optional args (cjihrig)
* crypto: Disable autonegotiation for SSLv2/3 by default (Fedor Indutny,
Timothy J Fontaine, Alexis Campailla)
This is a behavior change, by default we will not allow the negotiation to
SSLv2 or SSLv3. If you want this behavior, run Node.js with either
`--enable-ssl2` or `--enable-ssl3` respectively.
This does not change the behavior for users specifically requesting
`SSLv2_method` or `SSLv3_method`. While this behavior is not advised, it is
assumed you know what you're doing since you're specifically asking to use
these methods.
Always set ssl2/ssl3 disabled based on whether they are enabled in Node.
In some corner-case scenario, node with OPENSSL_NO_SSL3 defined could
be linked to openssl that has SSL3 enabled.
In the case of a pipe'd input, i.e. from the CI the fd will be a PIPE
and when listen() is called it will return ENOTSOCK instead of EINVAL.
Backport: cd2d3aedaa
The order of the callbacks is non-deterministic, so don't expect the
error messages to come back in the same order every time, instead just
verify they are expected messages.
This change disables SSLv2/SSLv3 use by default, and introduces a
command line flag to opt into using SSLv2/SSLv3.
SSLv2 and SSLv3 are considered unsafe, and should only be used in
situations where compatibility with other components is required and
they cannot be upgrade to support newer forms of TLS.
Because of constant-timeness change made in openssl-1.0.1j the error is
no longer returned from EVP_DecryptFinal_ex. Now it just return 0, and
thus the error message does not contain proper error code. Adapt to this
change, there is not much that we could do about it.
vcbuild.bat is calling vcvars.bat, which doesn't detect if the environment
has already been set. This causes repeated entries to be added to the PATH,
which after a few invocations will lead to an error:
The input line is too long.
You cannot spawn 'dir' on Windows because it's not an executable. Also,
some people might have 'ls' on their path on Windows, so I changed
invalidCmd to something that's highly unlikely to exist.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
The cluster children are hitting breakpoint at `cluster.onread` and
hanging on a Semaphore wait now. This prevents them from disconnecting
gracefully. Considering that the test is checking different thing, the
cluster children needs to be force killed from the grand parent process.
Reviewed-By: Trevor Norris <trevnorris@gmail.com>
PR-URL: https://github.com/joyent/node/pull/8476
Because of behavior change of some V8 APIs (they mostly became more
strict), following modules needed to be fixed:
* crypto: duplicate prototype methods are not allowed anymore
* contextify: some TryCatch trickery, the binding was using it
incorrectly
* util: maximum call stack error is now crashing in a different place
Reviewed-By: Trevor Norris <trevnorris@gmail.com>
PR-URL: https://github.com/joyent/node/pull/8476
Do not send signal to children if they are already in debug mode.
Node.js on Windows does not register signal handler, and thus calling
`process._debugProcess()` will throw an error.
Reviewed-By: Trevor Norris <trevnorris@gmail.com>
PR-URL: https://github.com/joyent/node/pull/8476
* Add official documentation that a Buffer instance is a viable
argument when instantiating a new Buffer.
* Properly set the poolOffset when a buffer needs to be truncated.
* Add comments clarifying specific peculiar coding choices.
* Remove a level of unnecessary indentation.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
The constants in enum v8::ExternalArrayType have been changed. The old
values are there for legacy reasons, but it's best to update anyway.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
* `util.inspect` cannot accept es6 symbol primitive
* It will throw exception if do `util.inspect(Symbol())`
* This also affects repl, console.log, etc.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Chris Dickinson <christopher.s.dickinson@gmail.com>
Add generic functions for (U)Int read/write operations on Buffers. These
support up to and including 48 bit reads and writes.
Include documentation and tests.
Additional work done by Trevor Norris to include 40 and 48 bit write
support. Because bitwise operations cannot be used on values greater
than 32 bits, the operations have been replaced with mathematical
calculations. Regardless, they are still faster than floating point
operations.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Performance improvement by moving checks for floating point operations
to JS and doing the operation on a protected internal function that
assumes all arguments are correct. Still abort if the operation
overflows memory. This can only be caused if the Buffer's length
property isn't the same as the actual internal length.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Passing null as the output stream to readline.Interface()'s constructor
is now supported. Any output written by readline is just discarded. It
makes it easier to use readline just as a line parser.
Fixes: https://github.com/joyent/node/issues/4408
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Since we are taking control of the microtask queue it makes sense to
disable autorun and only run microtasks when necessary. Just setting
isolate->SetAutorunMicrotasks(false) would cause _tickCallback() not to
be called.
Automatically running the microtask queue will cause it to run:
* After callback invocation
* Inside _tickCallback()
* After _tickCallback() invocation
The third one is unnecessary as the microtask queue is guaranteed to be
empty at this point. The first only needs to be run manually when
_tickCallback() isn't going to be called by MakeCallback().
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Match the behavior of the slow path by setting url.query to an empty
object when the url contains no query, but query parsing is requested.
Also add a test for this case, and update the documents to clearly
reflect this behavior.
Fixes: https://github.com/joyent/node/issues/8332
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
The two main goals of this change are:
- To make it easier to build the Intl option using ICU (particularly,
using a newer ICU than v8/Chromium's version)
- To enable a much smaller ICU build with only English support The goal
here is to get node.js binaries built this way by default so that the
Intl API can be used. Additional data can be added at execution time
(see Readme and wiki)
More details are at https://github.com/joyent/node/pull/7719
In particular, this change adds the "--with-intl=" configure option to
provide more ways of building "Intl":
- "full-icu" picks up an ICU from deps/icu
- "small-icu" is similar, but builds only English
- "system-icu" uses pkg-config to find an installed ICU
- "none" does nothing (no Intl)
For Windows builds, the "full-icu" or "small-icu" options are added to
vcbuild.bat.
Note that the existing "--with-icu-path" option is not removed from
configure, but may not be used alongside the new option.
Wiki changes have already been made on
https://github.com/joyent/node/wiki/Installation
and a new page created at
https://github.com/joyent/node/wiki/Intl
(marked as provisional until this change lands.)
Summary of changes:
* README.md : doc updates
* .gitignore : added "deps/icu" as this is the location where ICU is
unpacked to.
* Makefile : added the tools/icu/* files to cpplint, but excluded a
problematic file.
* configure : added the "--with-intl" option mentioned above.
Calculate at config time the list of ICU source files to use and data
packaging options.
* node.gyp : add the new files src/node_i18n.cc/.h as well as ICU
linkage.
* src/node.cc : add call into
node::i18n::InitializeICUDirectory(icu_data_dir) as well as new
--icu-data-dir option and NODE_ICU_DATA env variable to configure ICU
data loading. This loading is only relevant in the "small"
configuration.
* src/node_i18n.cc : new source file for the above Initialize..
function, to setup ICU as needed.
* tools/icu : new directory with some tools needed for this build.
* tools/icu/icu-generic.gyp : new .gyp file that builds ICU in some new
ways, both on unix/mac and windows.
* tools/icu/icu-system.gyp : new .gyp file to build node against a
pkg-config detected ICU.
* tools/icu/icu_small.json : new config file for the "English-only" small
build.
* tools/icu/icutrim.py : new tool for trimming down ICU data. Reads the
above .json file.
* tools/icu/iculslocs.cc : new tool for repairing ICU data manifests
after trim operation.
* tools/icu/no-op.cc : dummy file to force .gyp into using a C++ linker.
* vcbuild.bat : added small-icu and full-icu options, to call into
configure.
* Fixed toolset dependencies, see
https://github.com/joyent/node/pull/7719#issuecomment-54641687
Note that because of a bug in gyp {CC,CXX}_host must also be set.
Otherwise gcc/g++ will be used by default for part of the build.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
The current implementation uses the arguments object in the Server()
constructor. Since both arguments to Server() are optional, there was a
high likelihood of accessing a non-existent element in arguments, which
carries a performance overhead. This commit replaces the arguments
object with named arguments.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Running fill() with an empty string would cause Node to hang
indefinitely. Now it will return without having operated on the buffer.
User facing function has been pulled into JS to perform all initial
value checks and coercions. The C++ method has been placed on the
"internal" object.
Coerced non-string values to numbers to match v0.10 support.
Simplified logic and changed a couple variable names.
Added tests for fill() and moved them all to the beginning of
buffer-test.js since many other tests depend on fill() working properly.
Fixes: https://github.com/joyent/node/issues/8469
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
The parameter parser specifically looked for the old bracket syntax.
This generated a lot of warnings when building the docs. Those warnings
have been fixed by changing the parsing logic.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Several fields on OutgoingMessage were set after instantiation. These
have been included in the constructor to prevent mutation of the object
map after instantiation.
"name" is now explicitly checked to be a string. Where before if a
non-string was passed the following cryptic error was thrown:
_http_outgoing.js:334
var key = name.toLowerCase();
^
TypeError: undefined is not a function
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Calls from JS to C++ have an implicit HandleScope. So there is no need
to instantiate a new HandleScope in these basic cases.
Check if the returned int64_t is an SMI and cast the return value to
uint32_t instead of a double. Prevents needing to box the return value,
and saves a small amount of execution time.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Don't allocate any BIO buffers initially, do this on a first read from
the TCP connection. Allocate different amount of data for initial read
and for consequent reads: small buffer for hello+certificate, big buffer
for better throughput.
see #8416
Add stricter argument type checking to normalizeSpawnArguments().
Removes a number of extraneous checks in spawn().
Fix regression in handling of the optional args argument.
Add more thorough testing of spawn() arguments.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Only run lineEnding.test() on the newly acquired chunk of string instead
of on the entire line buffer.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Documentation incorrectly used bracket notation for optional parameters.
This caused inconsistencies in usage because of examples like the
following:
fs.write(fd, data[, position[, encoding]], callback)
This simply fixes all uses of bracket notation in documentation.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
The property server.connections should no longer be enumerable because
it has been deprecated. This will prevent deprecation warnings when
server objects are accessed by functions such as JSON.stringify.
Fixes: https://github.com/joyent/node/issues/8373
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Adds a test for benchmarking the module loader, needed for benchmarking
changes / refacortings in the module loader.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Timothy J Fontaine <tjfontaine@gmail.com>
4c9b30d introduced a regression in buffer.slice that 7c3c51b fixed, but
no test had been added to make sure that a similar regression is caught
by the tests suite in the future.
In 4c9b30d removal of the prototype attributes meant NativeBuffer() no
longer had the same object map as Buffer(). By now setting the same
properties in the same order both constructors will produce the same
map.
The same commit changed "parent" from undefined to null. This caused a
failure in Buffer#slice() where it was checked if parent === undefined.
Causing the incorrect parent to be set.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Expands the paragraph in the transform stream
implementation docs about the callback that is passed
to the _transform method to include details about how
two arguments may be passed, error and data. A code
example is also included.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
When calling write() after end() has been called on an OutgoingMessage,
an error is emitted and the write's callback is called with an instance
of Error.
Fix#7477.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Increase the performance of new Buffer construction by initializing all
properties before SetIndexedPropertiesToExternalArrayData call.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
When V8 started supporting Promises natively it also introduced a
microtack queue. This feature operates similar to process.nextTick(),
and created an issue where neither knew when the other had run. This
patch has nextTick() call the microtask queue runner at the end of
processing callbacks in the nextTickQueue.
Fixes: https://github.com/joyent/node/issues/7714
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Add a simple test to cover workers' implementation of
Worker.prototype.destroy(). Before adding this test, this code wouldn't
be covered by the tests suite, and any regression introduced in workers'
implementation of Worker.prototype.destroy wouldn't be caught.
Fixes: https://github.com/joyent/node/issues/8223
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
* npm: Update to 1.4.28
* v8: fix a crash introduced by previous release (Fedor Indutny)
* configure: add --openssl-no-asm flag (Fedor Indutny)
* crypto: use domains for any callback-taking method (Chris Dickinson)
* http: do not send `0rnrn` in TE HEAD responses (Fedor Indutny)
* querystring: fix unescape override (Tristan Berger)
* url: Add support for RFC 3490 separators (Mathias Bynens)
When replying to a HEAD request, do not attempt to send the trailers and
EOF sequence (`0\r\n\r\n`). The HEAD request MUST not have body.
Quote from RFC:
The presence of a message body in a response depends on both the
request method to which it is responding and the response status code
(Section 3.1.2). Responses to the HEAD request method (Section 4.3.2
of [RFC7231]) never include a message body because the associated
response header fields (e.g., Transfer-Encoding, Content-Length,
etc.), if present, indicate only what their values would have been if
the request method had been GET (Section 4.3.1 of [RFC7231]).
fix#8361
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
This adds domains coverage for pdbkdf2, pseudoRandomBytes, and randomBytes.
All others should be covered by event emitters.
Fixes#5801.
Reviewed-By: Timothy J Fontaine <tjfontaine@gmail.com>
Compiles and executes source code in V8's debugger context. Provides
a programmatic way to get access to the debug object by executing:
var Debug = vm.runInDebugContext('Debug');
Fixes#7886.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Strings are treated as UTF8 instead of one-byte strings when
names are processed and when OpenSSL's ..._print functions are used.
This commit fixes simple/test-tls-peer-certificate-encoding test.
fix#8366
The behavior of the `node_modules` lookup algorithm was
changed in #1177, but the documentation was not updated completely
to describe the new behavior.
The pseudocode of the lookup algorithm did not metion that
`index.json` is tried to be loaded if you require a folder.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
V8 3.26.31 has received 14 patches since the upgrade to 3.26.33. Since
3.26.33 is technically a tag on the 3.27 branch, reverting back to
3.26.31 would remove now default functionality like WeakMaps. Because of
that the patches have simply been cherry-picked and squashed.
Here is a summary of all patches:
* Fix index register assignment in LoadFieldByIndex for arm, arm64, and
mips.
* Fix invalid attributes when generalizing because of incompatible map
change.
* Skip write barriers when updating the weak hash table.
* MIPS: Avoid HeapObject check in HStoreNamedField.
* Do GC if CodeRange fails to allocate a block.
* Array.concat: properly go to dictionary mode when required.
* Keep CodeRange::current_allocation_block_index_ in range.
* Grow heap slower if GC freed many global handles.
* Do not eliminate bounds checks for "<const> - x".
* Add missing map check to optimized f.apply(...).
* In GrowMode, force the value to the right representation to avoid
deopts between storing the length and storing the value.
* Reduce max executable size limit.
* Fix invalid condition in check elimination effects.
* Fix off-by-one error in Array.concat slow mode check.
For more information see: https://github.com/v8/v8/commits/3.26
Reviewed-By: Fedor Indutny <fedor@indutny.com>
There is only one call site that uses it and that can do the checks
itself. Removes ~15 lines of code.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Unexport the http.parsers freelist. It was originally exported by Ryan
in commit 0003c701 but the commit log doesn't mention why and it's never
been documented. It's unclear if there are any users.
The lifecycle of parser objects changed recently and it seems better to
not let people shoot themselves in the foot so easily.
If it turns out there are actually users, we can always re-export it
again - probably under a slightly different name, to force people to
update their code to the new way of things.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Make it a little harder to slip in use-after-free bugs by nulling out
references to the parser object after handing it off to freeParser().
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
It's safe to call BaseObject::object() from your destructor _unless_
the handle is weak; then it's the weak callback that is calling your
destructor and the object will have been released by the time the
destructor runs.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Weak handles put strain on the garbage collector and the parser handle
doesn't need to be weak in the first place. This change should improve
GC times on busy servers a little.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Counterpart to Wrap(), clears the previously assigned internal field.
Will be used in an upcoming commit.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Fix a resource leak where an intermediate Local<Context> handle in
Environment::GetCurrent() got leaked into whatever HandleScope was
further up the stack.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Allow cluster workers to listen on exclusive ports for TCP and UDP,
instead of forcing all calls to go through the cluster master.
Fixes: #3856
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Reviewed-by: Fedor Indutny <fedor@indutny.com>
node::StringBytes::Write() has appropriate support to write strings with
'binary' encoding. So expose that API through StreamWrap and allow
inheriting classes to use it.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
The REPL global object lazy loads modules by placing getters for each.
This causes MakeDomainCallback() to be run if a native module is loaded
from the REPL, but if the domain module hasn't been loaded then there
are no enter/exit callbacks to be called. Causing an assert() to fail.
Fix the issue by conditionally running the callback instead of asserting
it is available. Also add "addon" test to verify the fix.
Fixes: #8231
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
PR #8034 came with a test to make sure that timers expiry is based on
monotonic time and not on wall-clock time. However, a bug in the
implementation broke timers with non-integer delays. A fix for this
issue was provided with PR #8073, but it didn't come with a test.
Because #8073 fixed a subtle issue that could reappear in the future,
and because the impact of such an issue would be significant, I suggest
adding this test.
The test would timeout after 1 minute if the issue was reproduced.
Otherwise it will run very quickly.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Allow to create an executable with no external dynamic libraries, also the
ones from the system. This is somewhat dependent of the used C lib, for
example glibc has some internal dynamic libraries loaded by itself, but for
other ones like eglibc or dietlib, this would produce a true static linked
executable. This can be of interest for embebers or resource constraints
platforms, but the main reason for this is to allow to use a Javascript
file as Linux kernel 'init' on NodeOS.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Currently, cluster workers can be removed from the workers list in three
different places:
- In the exit event handler for the worker process.
- In the disconnect event handler of the worker process.
- In the disconnect event handler of the cluster master.
However, handles for a given worker are cleaned up only in one of these
places: in the cluster master's disconnect event handler.
Because these events happen asynchronously, it is possible that the
workers list is empty before we even clean up one handle. This makes
the assert that makes sure that no handle is left when the workers
list is empty fail.
This commit removes the worker from the cluster.workers list only when
the worker is dead _and_ disconnected, at which point we're sure that
its associated handles are cleaned up.
Fixes#8191 and #8192.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
In case of an invalid DH parameter file, it is sliently discarded. To
use auto DH parameter in a server and DHE key length check in a
client, we need to wait for the next release of OpenSSL-1.0.2.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
There is no need to split the host by hand in `url.js` – Punycode.js
takes care of it anyway. This not only simplifies the code, but also
adds support for RFC 3490 separators (i.e. not just U+002E, but U+3002,
U+FF0E, and U+FF61 as well).
Closes#6055.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Documentation states that `querystring.unescape` may be overridden to
replace unescaper during parsing. However, the function was only
being used as a fallback for when the native decoder throws (on a
malformed URL). This patch moves the call to the native function and
the try/catch around it into querystring.unescape then has the parser
always invoke it, so that an override will always be used.
Fixes#4055
Reviewed-By: Fedor Indutny <fedor@indutny.com>
fd80a31e06 has introduced a segfault
during redundant boundary check elimination (#8208).
The problem consists of two parts:
1. Abscense of instruction iterator in
`EliminateRedundantBoundsChecks`. It was present in recent v8, but
wasn't considered important at the time of backport. However, since
the function is changing instructions order in block, it is
important to not rely at `i->next()` at the end of the loop.
2. Too strict ASSERT in `MoveIndexIfNecessary`. It is essentially a
backport of a45c96ab from v8's upstream. See
https://github.com/v8/v8/commit/a45c96ab for details.
fix#8208
net Sockets were calling read(0) to start reading, without
checking to see if they were paused first. This would result
in paused Socket objects keeping the event loop alive.
Fixes#8200
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Fix assertion failure from poor argument parsing logic introduced in
6ea5d16. Add tests to make sure arguments are properly parsed.
Fixes: 6ea5d16 "dns: always set variable family in lookup()"
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Fix a few issues in test/internet/test-dns.js:
- 'hint' should be 'hints'
- reverse name lookup is not guaranteed to return 'localhost'
- V4MAPPED hint requires IPV6 address family
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Tests in test-net-remote-address-port.js assume that client and server
sockets always use IPv4. However, depending on the OS and the network
interfaces setup, this is not true. This change makes the test consider
that both IPv4 or IPv6 sockets are valid
Fixes#8096.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Instead of hard-coding http service name in test-dns, retrieve it from
/etc/services. This is not ideal, but it's still better than hard-coding
it.
Fixes#8047.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
1 is actually a valid flag on SmartOS. More generally, hints flags'
values are defined by the underlying native flags, and these can have
different values on different systems.
Using (ADDRCONFIG | V4MAPPED) + 1 ensure that the flag will be invalid,
since it will always be different from ADDRCONFIG, V4MAPPED, ADDRCONFIG
| V4MAPPED, 0 and any other combination of even flags.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
The slot 0 and 1 had already been taken by "gin" and "blink" in Chrome,
and the size of isolate's slots is 4 by default, so using 3 should hopefully
make node work independently when embedded into other application.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Fixes an issue that caused the first querystring to be parsed prepending
a "?" in the first variable name on relative urls with no #fragment
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Fix issue where output of a native prototype method would simply print
[Function]. It will now print [Function: name].
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Regression occurred that prevented the variable "family" from being set
properly when the lookup() function's "options" parameter was passed a
number instead of an object.
Also included a sanity check by setting the default value of "family" to
a value that will not pass verification.
Fixes: e643fe4 "dns: fix GetAddrInfo assert"
Reviewed-by: Alexis Campailla <alexis@janeasystems.com>
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Linking CoreFoundation for OSX is needed for OSX debugging features to
function properly.
For instance Instruments cannot record Heap Allocations if the
CoreFoundation is not linked.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Disabling the part of the test that relies on dispatching SIGHUP,
because sending SIGHUP is not supported on Windows.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Send messages until both the parent and the child process have received
at least one message. If at least one of them doesn't receive any
message, the test runner will make the test timeout.
Fixes#8046.
This is the Node side of the fix for Node's cluster module on Windows.
https://github.com/joyent/node/issues/7691
The other required part is
https://github.com/joyent/libuv/pull/1384
Windows and Unix return certain socket errors (i.e. EADDRINUSE) at
different times: bind on Windows, and listen on Unix.
In an effort to hide this difference, libuv on Windows stores such
errors in the bind_error field of uv_tcp_t, to defer raising it at
listen time.
This worked fine except for the case in which a socket is shared in
a Node cluster and a bind error occurs.
A previous attempt to fix this (
d1e6be14603da36fe00e
) was flawed becaused in an attempt to relay the error at the JS level
it caused the master to start accepting connections.
With this new approach, libuv itself is relaying the bind errors,
providing for a uniform behavior of uv_tcp_listen.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
The method GetAddrInfo() is used by more than just dns.lookup(), and in
those cases a third argument isn't passed. This caused the following
check to abort:
assert(args[3]->IsInt32());
Fixes: 4306786 "net: don't prefer IPv4 addresses during resolution"
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Currently the address resolution family defaults to IPv4. Instead remove
the preference and instead resolve to a family suitable for the host.
Expose the getaddrinfo flags and allow them to be passed.
Add documentation about new flags.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
On Windows, path.isAbsolute() returns an empty string on failed cases.
This forces the return value to always be boolean.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
When backporting f8193ab into v0.10, a regression was introduced. Timers
with non-integer timeout could trigger a infinite recursion with 100%
cpu usage. This commit backports 93b0624 which fixes the regression.
After backporting f8193ab, instead of using Date.now(), timers would use
Timer.now() to determine if they had expired. However, Timer.now() is
based on loop->time, which is not updated when a timer's remaining time
is > 0 and < 1. Timers would thus never timeout if their remaining time
was at some point > 0 and < 1.
With this commit, Timer.now() updates loop->time itself, and timers
always timeout eventually.
Fixes#8065 and #8068.
Callbacks in node are usually asynchronous, and should never be
sometimes synchronous, and sometimes asynchronous.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Internal function trim(arr). 2nd parameter of slice() should be slice's
end index (not included). Because of function normalize() (called before
trim()), "start" is always zero so the bug -for now- has no effect, but
its a bug waiting to happen.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
A streams1 stream will have its falsy values such as 0, false, or ""
eaten by the upgrade to streams2, even when objectMode is enabled.
Include test for said cases.
Reviewed-by: isaacs <i@izs.me>
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
This patch adds a fast path for parsing of simple path-only URLs, as commonly
found in HTTP requests received by a server.
Benchmark results [ms], before / after patch:
/foo/bar 0.008956 0.000418 (fast path used)
http://example.com/ 0.011426 0.011437 (normal slow path, no change)
In a simple 'ab' benchmark of a single-threaded web server, this patch
increases the request rate from around 6400 to 7400 req/s.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
Original commit message:
timers: use uv_now instead of Date.now
This saves a few calls to gettimeofday which can be expensive, and
potentially subject to clock drift. Instead use the loop time which
uses hrtime internally.
In addition to the backport, this commit:
- keeps _idleStart timers' property which is still set to
Date.now() to avoid breaking existing code that uses it, even if
its use is discouraged.
- adds automated tests. These tests use a specific branch of
libfaketime that hasn't been submitted upstream yet. libfaketime
is git cloned if needed when running automated tests.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
This is the Node side of the fix for Node's cluster module on Windows.
https://github.com/joyent/node/issues/7691
The other required part is
https://github.com/joyent/libuv/pull/1384
Windows and Unix return certain socket errors (i.e. EADDRINUSE) at
different times: bind on Windows, and listen on Unix.
In an effort to hide this difference, libuv on Windows stores such
errors in the bind_error field of uv_tcp_t, to defer raising it at
listen time.
This worked fine except for the case in which a socket is shared in
a Node cluster and a bind error occurs.
A previous attempt to fix this (
d1e6be14603da36fe00e
) was flawed becaused in an attempt to relay the error at the JS level
it caused the master to start accepting connections.
With this new approach, libuv itself is relaying the bind errors,
providing for a uniform behavior of uv_tcp_listen.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
v0.10 and node docs specific that in a worker, the 'message' and 'error'
event emits on process, and on cluster.worker.
Reviewed-By: Fedor Indutny <fedor@indutny.com>
internet/test-dns.js assumes that ::1 always resolves to "localhost" on
all platforms. This is not what happens in reality. Some platforms
resolve it to "ip6-localhost" too. There doesn't seem to be any consensus
on what's the right thing to do. However, most sane platforms will use
either one of these two values.
Reviewed-by: Trevor Norris <trev.norris@gmail.com>
Prevent test-process-kill-pid.js tests suite from sending SIGHUP
to its process group, which was causing the test runner to terminate.
Fix jenkins' jobs for nodejs-master.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Between 0.11.1 and 0.11.2, the message and error events stopped
being usable via the cluster.worker object. This commit makes
them usable again. Closes#7998.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Currently, invalid usage such as:
process.kill('SIGTERM')
process.kill(null)
process.kill(undefined);
all coerce the pid to 0, and signal the current process.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Currently, stringification of an empty array outputs a single
separator character. This commit causes an empty array to output
the empty string.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
When TLS Alert is occured in handshake, ClearOut only write it into
wbio and does not flush to socket. TLS Alert should be written to
socket with EncOut before socket is destroyed within its error
callback.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
According to V8 changelog, `armv7` config variable was replaced by
`arm_version`, with value either '7', '6' or 'default'.
Detect ARMv7 and ARMv6 CPUs and default to 'default'.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Currently, checkExecSyncError() attempts to access the contents
of stderr. When stdio is set to 'ignore', this causes a crash.
This commit adds a check on the access of stderr. Closes#7966.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Documentation claimed it accepted a single label argument, as time and
timeEnd do, which was incorrect.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
This allows embedders enough control to initialize node, run the
event loop, and cleanly exit (including calling handlers).
Signed-off-by: Fedor Indutny <fedor@indutny.com>
A ReadableStream with a base64 StringDecoder backed by only
one or two bytes would fail to output its partial data before
ending. This fix adds a check to see if the `read` was triggered
by an internal `flow`, and if so, empties any remaining data.
fixes#7914.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Emits on every call to cluster.setupMaster(), even if no new settings
are given. This is because calling cluster.setupMaster() without
arguments (or with an empty options object) results in the settings
being restored to their defaults.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Only attributes of 'cluster.settings' will be modified after the first
call, leaving all other cluster initialization alone. Each call that
includes a 'settings' argument triggers a 'setup' event to be emitted.
Instead of each call resetting all values to their defaults, use the
current settings (if any) as the default. This retains setupMaster's
support how cluster.fork() uses setupMaster() to ensure
cluster.settings has been populated.
Update example in docs to use current node coding style and include
an example of progressive configuration.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Pass in the v8::Context, instead of creating it
within CreateEnvironment. This allows callers
to use a pre-existing context.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
The spawnSync() cwd option was being copied to the incorrect
location. This commit copies to the correct location.
Closes#7824
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Switch condition order to check for null before calling isNaN().
Also remove two unnecessary calls to isNaN() that are already
covered by calls to isFinite(). This commit targets v0.10, as
opposed to #7891, which targets master (suggested by
@bnoordhuis). Closes#7840.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Use a util.deprecate wrapper to issue warnings like any other
deprecated API. The option has been marked as deprecated in the docs
since v0.5.11.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Default highWaterMark is now set properly when using stream Duplex's
writableObjectMode and readableObjectMode options.
Added condition to the already existing split objectMode test to ensure
the highWaterMark is being set to the correct default value on both the
ReadableState and WritableState for readableObjectMode and
writableObjectMode.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Documentation for console.assert incorrectly described message as a
single message, but it is a format.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Fix for `error` events emitting only once when reconnecting
a single instance of net.Socket.
Fixesjoyent/node#7888
Signed-off-by: Fedor Indutny <fedor@indutny.com>
A udp packet can have 0 content. In that case nread will be equal to 0,
but addr != NULL.
Add test case for empty data gram packets and fixed test that checked
for OOB when length == 0.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
V8 seems to ignore the default value for want_separate_host_toolset and
would override it at build time. Instead always explicitly set the value.
Fixes#7833
The refactor in 3ae0b17c broke the multiline input's visual appearence.
While actually switching to this mode, the `...` prefix is not
displayed.
Additionally, account only SyntaxErrors that are happening at the parse
time, everything else should not be switching repl to the multiline
mode.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
The [Stream documentation for .push](http://nodejs.org/api/stream.html#stream_readable_push_chunk_encoding)
explicitly states multiple times that null is a special cased value
that indicates the end of a stream. It is confusing and undocumented
that undefined *also* ends the stream, even though in object mode
there is a distinct and important difference.
The docs for Object-Mode also explicitly mention null as the *only*
special cased value, making no mention of undefined.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Creating a new buffer from the toJSON() output of another
buffer does not currently work. This commit adds that
support. Closes#7849.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Calling dns.lookup with arguments that generate an error from c-ares
previously sent those errors back to the callback. This commit restores
the ca9eb71 behavior.
Fixes#7731.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Instrumentation code might need to find out the entry point of the
process in a global context.
Documenting the existing process.mainModule to officially support this.
Fixes#7808
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Currently child_process.exec() assumes that cmd.exe is on the PATH,
and fails with a spawn ENOENT error if it is not.
The Windows 'comspec' environment variable contains the full filepath
to the default command interpreter, eg "C:\Windows\System32\cmd.exe".
Should it not be set, we fall-back to using 'cmd.exe' from PATH, as
before.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Increase the performance and simplify the logic of Buffer#write{U}Int*
and Buffer#read{U}Int* methods by placing the byte manipulation code
directly inline.
Also improve the speed of buffer-write benchmarks by creating a new
call directly to each method by using Function() instead of calling by
buff[fn].
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Conflicts:
lib/buffer.js
It's possible to construct a typed array from a buffer but the buffer
is treated as an array, not a byte array as one might expect.
Fixes#7786.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Building MSIs for different arch's can sometimes confuse MSBuild and
Wix, isntead run the toolchain externally so we don't have to worry
about which arch cmd.exe is running as.
This features comes from the need of adding extra options when displaying
the object using console.dir().
console.dir() accepts now a second parameter that is passed to util.inspect()
in order to provide extra options to the output. These options are: depth, color
and showHidden. More information about these options in util.inspect() documentation.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
WriteItem callback may add new item to the `pending_write_items`. Ensure
that this item won't be called in the same `InvokeQueued` call, as it
may result in way-to-early `finish` event on js-side.
fix#7733
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Tests for the behaviour in v0.10.x which allows process.argv changes
to be honoured by cluster.setupMaster().
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
In v0.10.x, process.argv and process.execArgv would only be
evaluated and copied into cluster.settings on the first call to
cluster.setupMaster() (either directly or via cluster.fork()),
allowing them to be modified as needed before initializing the
settings.
In 41b75ca the behaviour was changed so that these values are
initialized at the time of the first require('cluster').
Fixes#7670.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
* openssl: to 1.0.1h (CVE-2014-0224)
* npm: upgrade to 1.4.10
* utf8: Prevent Node from sending invalid UTF-8 (Felix Geisendörfer)
- *NOTE* this introduces a breaking change, previously you could construct
invalid UTF-8 and invoke an error in a client that was expecting valid
UTF-8, now unmatched surrogate pairs are replaced with the unknown UTF-8
character. To restore the old functionality simply have NODE_INVALID_UTF8
environment variable set.
* child_process: do not set args before throwing (Greg Sabia Tucker)
* child_process: spawn() does not throw TypeError (Greg Sabia Tucker)
* constants: export O_NONBLOCK (Fedor Indutny)
* crypto: improve memory usage (Alexis Campailla)
* fs: close file if fstat() fails in readFile() (cjihrig)
* lib: name EventEmitter prototype methods (Ben Noordhuis)
* tls: fix performance issue (Alexis Campailla)
Previously we were only shifting the address space for ASLR on 32bit
processes, apply the same shift for 64bit so processes don't
get artificially limited native heap.
Previously v8's WriteUtf8 function would produce invalid utf-8 output
when encountering unmatched surrogate code units [1]. The new
REPLACE_INVALID_UTF8 option fixes that by replacing invalid code points
with the unicode replacement character.
[1]: JS Strings are defined as arrays of 16 bit unsigned integers. There
is no unicode enforcement, so one can easily end up with invalid unicode
code unit sequences inside a string.
- https://codereview.chromium.org/121173009/
- https://code.google.com/p/v8/source/detail?r=18683
Note: The v8 test case did not cleanly apply, so it's missing from this
patch. I'm assuming this is not a problem if the v8 test suite is not
part of the node build / test system. If that's the case I'll fix it.
Otherwise the test case will be integrated once v8 is upgraded.
This patch simplifies the implementation of StringDecoder, fixes the
failures from the new test cases, and also no longer relies on v8's
WriteUtf8 function to encode individual surrogates.
The test cases are still essentially the same, but now all possible ways
of writing a buffer into the decoder are tested, which has exposed a few
failing scenarios that had not been discovered so far!
The test is supposed to measure the performance of the base64 encoder
so move the Buffer#write() calls out of the benchmark section.
The overhead of the calls isn't terrible (about 1-3%) but having
unrelated activity in a micro-benchmark is never a good idea.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Replace the CONTAINER_OF macro with a template function that is as
type-safe as a reinterpret_cast<> of an arbitrary pointer can be made.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Currently, if fstat() fails in readFile(), the callback
is invoked without closing the file. This commit closes
the file before calling back.
Closes#7697
Currently, if fstat() fails in readFile(), the callback
is invoked without closing the file. This commit closes
the file before calling back.
Closes#7697
See https://github.com/joyent/node/issues/7675
net.server.listen() behaves inconsistently depending on whether the port
number is provided.
1. port === 0 && host == '' (i.e. false-y), node creates an AF_INET
socket but does not call bind().
2. port > 0 && host == '', node creates an AF_INET6 socket and calls
bind().
The fix makes 1 consistent with 2.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Rework the fix from commit 6810132 in a way that removes ~60 lines of
code.
The bug was introduced in commit e87ceb2 (mea culpa) and is at its core
a pointer aliasing bug where sometimes two independent pointers existed
that pointed to the same chunk of heap memory.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Otherwise it's not possible to check from inside a destructor if V8 is
still alive with v8::V8::IsDead(). In V8 3.25, that function returns
true until the last isolate is destroyed.
This used to work in v0.10 and is a standard trick to dispose persistent
handles conditionally.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
dispose() free's the memory when executed and sets the external array
data to NULL and length to zero.
To prevent the same memory from being free'd twice when the object is
garbage collected we first check if the object's external array data
length == 0. Since alloc() passes NULL to
SetIndexedPropertiesToExternalArrayData() if length == 0 there's no
opportunity for memory leak.
Fix up a bad assumption in pummel/test-net-pingpong, namely that binding
to 'localhost' or '' means that incoming connections will have an IPv4
address.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
EMFILE and ENFILE mean 'out of file descriptors'. It's a run-time error
and as such should emit an error on the child process object, not throw
an exception.
Fixes#7453.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Avoid sending unsent data and destroying otherwise legitimate sockets
for requests that are aborted while still in the agent queue. This
reduces stress on upstream systems who will likely respond to the
request but client app already knows that it will be dropped on the
floor and also helps avoid killing keep-alive connections.
See also commit e7bfbaf. Don't depend on deps/v8/build/features.gypi
to disable handle zapping, be explicit about it.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Slashes should be documented, because 3rd-party protocols -- those
postfixed with `://` -- would incorrectly `format` and `parse` if they
didn't set/get the `slashes` option.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Not all querystring are utf-8 encoding, make querystring can be used
to encode / decode `non-utf8` encoding string if necessary.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Do not ever call `Delete()` on `proxy_global_`, it will invoke
`GlobalPropertyDeleteCallback` and cause crash because of the infinite
recursion.
fix#7529
Adds a section to the transform stream docs to clarify the
difference between the `end` event and the `finish` events.
Also clarifies the wording on the `end` event.
64bit constants are keyed for x64 platforms only, add PowerPC based
platform constants.
Node's "ucs2" encoding wants LE character data stored in the Buffer, so
we need to reorder on BE platforms. See
http://nodejs.org/api/buffer.html regarding Node's "ucs2" encoding
specification
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Storing it in SSL_CTX is incorrect as it may go away and get destructed
earlier, also it'll yield invalid results in SelectSNIContextCallback.
Use `SSL_get_app_data()` instead.
fix#7484
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
The spawnsync test was written wrong, the timeout can never fire before
the sync process has returned, the delta is immaterial and times when
it was succeeding are not reliable cases.
Instead verify that the timeout doesn't fire while the sync process is
happening.
When close() is called on a non-listening server, a synchronous
error is thrown. This commit causes the error to be passed to
the asynchronous callback function instead.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
ClientHelloParser used to contain an 18k buffer that was kept around
for the life of the connection, even though it was not needed in many
situations. I changed it to be deallocated when it's determined to
be no longer needed.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Fix the following compiler warning on systems where _XOPEN_SOURCE is
defined by default:
../src/node_constants.cc:35:0: warning: "_XOPEN_SOURCE" redefined
#define _XOPEN_SOURCE 500
Move the (re)definition of _XOPEN_SOURCE to the top of the file while
we're here. Commit 00890e4 adds a `#define _XOPEN_SOURCE 500` in order
to make <fcntl.h> expose O_NONBLOCK but it does so after other system
headers have been included. If those headers include <fcntl.h>, then
the #include in node_constants.cc will be a no-op and O_NONBLOCK won't
be visible.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
stringToFlags() has fall throughs in a case statement.
However, they are not consistently implemented. This commit adds
consistency.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
There was an underlying assumption in readline.emitKeypressEvents (and
by extension emitKey) that the given stream (usually process.stdin)
would emit 'data' once per keypress, which is not always the case.
This commit buffers the input stream and ensures a 'keypress' event is
triggered for every keypress (including escape codes).
Signed-off-by: Fedor Indutny <fedor@indutny.com>
This test is still in test/disabled because it requires a tty, however
when executed directly this test now passes.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Ensure TypeError is thrown, fix a bug where `env` option was
assuming the option was actually an object.
This case is especially bad because it then sets `env == null`
instead of using `process.env`.
Fix#7456
Signed-off-by: Fedor Indutny <fedor@indutny.com>
A recent change to v8's API now makes it impossible to memcpy to a
v8::ArrayBuffer without causing it to be externalized. This means that
the garbage collector will not automatically free the memory when the
object is collected.
When/If the necessary API is included to allow the above
Buffer#toArrayBuffer() will be reintroduced.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Not removing 'end' listeners for input and output on the 'close' event
resulted in an EventEmitter related memory leak.
This issue also might be reproduced at:
https://github.com/npm/npm/issues/5203
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
When process._setupNextTick() was introduced as the means to properly
initialize the mechanism behind process.nextTick() a chunk of code was
left behind that assigned memory to process._tickInfo. This code is no
longer needed.
Before this commit the EventEmitter methods were anonymous functions.
V8 tries to infer names for anonymous functions based on the execution
context but it frequently gets it wrong and when that happens, the
stack trace is usually confusing and unhelpful. This commit names all
methods so V8 can fall back to the method.name property.
The above gotcha applies to all anonymous functions but is exacerbated
for EventEmitter methods because those are invoked with a plenitude of
different receivers.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
On windows you can see ECONNABORTED instead of ECONNRESET in various
scenarios, and they are both applicable we're testing that Node is not
swallowing these errors which it was known to do prior to 0.10
As a comment in the test states: "This test should not be ported to
v0.10 and higher, because the problem is fixed by not ignoring
ECONNRESET in the first place."
The test is checking whether write returns false instead of whether an
ECONNRESET has been raised.
Replace with test-http-destroyed-socket-write2, this test verifies that
ECONNRESET is raised when writing to an http request where the server
has destroyed the socket.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
* Don't set referer if already set
* fetch: Send referer and npm-session headers
* run-script: Support --parseable and --json
* list runnable scripts (Evan Lucas)
* Use marked instead of ronn for html docs
On Windows we cannot get the server address until a connection
is accepted.
From MSDN:
The getsockname function does not always return information about
the host address when the socket has been bound to an unspecified
address, unless the socket has been connected with connect or accept
(for example, using ADDR_ANY). A Windows Sockets application must not
assume that the address will be specified unless the socket is
connected.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
* Check SHA before using files from cache
* adduser: allow change of the saved password
* Make `npm install` respect `config.unicode`
* Fix lifecycle to pass `Infinity` for config env value
* Don't return 0 exit code on invalid command
* cache: Handle 404s and other HTTP errors as errors
* bump tap dep, make tests stderr a bit quieter
* Resolve ~ in path configs to env.HOME
* Include npm version in default user-agent conf
* npm init: Use ISC as default license, use save-prefix for deps
* Many test and doc fixes
Because of differences in memcmp() implementation, normalize output to
return -1, 0 or 1 only.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
This commit introduces `readableObjectMode` and
`writableObjectMode` options for Duplex streams.
This can be used mostly to make parsers and
serializers with Transform streams.
Also the docs section about stream state objects
is removed, because it is not relevant anymore.
The example from the section is remade to show
new options.
fixes#6284
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
When ExitCallback was not called with an error such as ENOENT in
uv_spawn, the process handle still remains refed and needs to be closed.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
1) ThrowCryptoTypeErrors was not actually used for
type-related errors. Removed it.
2) For AEAD modes, OpenSSL does not set any internal
error information if Final does not complete suc-
cessfully. Therefore, "TypeError:error:00000000:l
ib(0):func(0):reason(0)" would be the error mess-
age. Use a default message for these cases.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
compare() works like String.localeCompare such that:
Buffer.compare(a, b) === a.compare(b);
equals() does a native check to see if two buffers are equal.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Commit f9ced08 switches V8 on Linux over from gettimeofday() to
clock_getres() and clock_gettime(). As of glibc 2.17, those functions
live in libc. For older versions, we need to pull them in from librt.
Fixes the following link-time error;
Release/obj.target/deps/v8/tools/gyp/libv8_base.a(platform-posix.o):
In function `v8::internal::OS::Ticks()':
platform-posix.cc:(.text+0x93c):
undefined reference to `clock_gettime'
platform-posix.cc:(.text+0x989):
undefined reference to `clock_getres'
Fixes#7514.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Date.now() indirectly calls gettimeofday() on Linux and that's a system
call that is extremely expensive on virtualized systems when the host
operating system has to emulate access to the hardware clock.
Case in point: output from `perf record -c 10000 -e cycles:u -g -i`
for a benchmark/http_simple bytes/8 benchmark with a light load of
50 concurrent clients:
53.69% node node [.] v8::internal::OS::TimeCurrentMillis()
|
--- v8::internal::OS::TimeCurrentMillis()
|
|--99.77%-- v8::internal::Runtime_DateCurrentTime(v8::internal::Arguments, v8::internal::Isolate*)
| 0x23587880618e
That's right - over half of user time spent inside the V8 function that
calls gettimeofday().
Notably, nearly all system time gets attributed to acpi_pm_read(), the
kernel function that reads the ACPI power management timer:
32.49% node [kernel.kallsyms] [k] acpi_pm_read
|
--- acpi_pm_read
|
|--98.40%-- __getnstimeofday
| getnstimeofday
| |
| |--71.61%-- do_gettimeofday
| | sys_gettimeofday
| | system_call_fastpath
| | 0x7fffbbaf6dbc
| | |
| | |--98.72%-- v8::internal::OS::TimeCurrentMillis()
The cost of the gettimeofday() system call is normally measured in
nanoseconds but we were seeing 100 us averages and spikes >= 1000 us.
The numbers were so bad, my initial hunch was that the node process was
continuously getting rescheduled inside the system call...
v8::internal::OS::TimeCurrentMillis()'s most frequent caller is
v8::internal::Runtime_DateCurrentTime(), the V8 run-time function
that's behind Date.now(). The timeout handling logic in lib/http.js
and lib/net.js calls into lib/timers.js and that module will happily
call Date.now() hundreds or even thousands of times per second.
If you saw exports._unrefActive() show up in --prof output a lot,
now you know why.
That's why this commit makes V8 switch over to clock_gettime() on Linux.
In particular, it checks if CLOCK_REALTIME_COARSE is available and has
a resolution <= 1 ms because in that case the clock_gettime() call can
be fully serviced from the vDSO.
It speeds up the aforementioned benchmark by about 100% on the affected
systems and should go a long way toward addressing the latency issues
that StrongLoop customers have been reporting.
This patch will be upstreamed as a CR against V8 3.26. I'm sending it
as a pull request for v0.10 first because that's what our users are
running and because the delta between 3.26 and 3.14 is too big to
reasonably back-port the patch. I'll open a pull request for the
master branch once the CR lands upstream.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Forcibly flushes the request headers. You need this with long-lived
HTTP connections where the first data isn't written until the connection
has been established (think: tunneling requests over HTTP CONNECT.)
Fixes#7296.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
In tls.connect a unix socket connection to a path may be made in
recent versions of node by specifying the value for the path
property.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
OpenSSL behaves oddly: on client `cert_chain` contains
the `peer_certificate`, but on server it doesn't.
Signed-off-by: Fedor Indutny <fedor@indutny.com>
When creating a TLSSocket instance based on the existing connecting
socket, `_connecting` property is copied after the initialization of
`net.Socket`. However, since `net.Socket` constructor will call
`.read(0)` if the `readable` is true - error may happen at this code
chunk in net.js:
Socket.prototype._read = function(n) {
debug('_read');
if (this._connecting || !this._handle) {
debug('_read wait for connection');
this.once('connect', this._read.bind(this, n));
...
Leading to a test failures on windows:
- test/simple/test-tls-connect-given-socket.js
Signed-off-by: Fedor Indutny <fedor@indutny.com>
* isaacs, Robert Kowalski, Benjamin Coe: Test Improvements
* isaacs doc: Add canonical url
* isaacs view: handle unpublished packages properly
* Raynos (Jake Verbaten) do not log if silent
* Julian Gruber fix no such property error
* isaacs npmconf@0.1.14
* Thorsten Lorenz adding save-prefix configuration option
* isaacs npm-registry-client@0.4.7
* isaacs cache: treat missing versions as a 404
* isaacs cache: Save shasum, write resolved/etc data to cache
* isaacs cache: Always fetch root doc
* isaacs cache: don't repack unnecessarily from tmp
* Andrey Kislyuk Don't crash if shrinkwrap-dependencies were not passed in pkginfo
* Robert Kowalski fix link in faq
* Jean Lauliac Add a peerDependencies section in package.json doc
* isaacs read-installed@2.0.2
Oversight to not pass blksize to fs.Stats on initialization.
Also added a test to make sure the object property has been set. Since
now on Windows both blksize and blocks will simply be set to undefined.
Fix possible deadlock, when handles are sent in both direction
simultaneously. In such rare cases, both sides may queue their
`NODE_HANDLE_ACK` replies and wait for them.
fix#7465
Fix issue where a signed integer is returned.
Example:
var b = new Buffer(4);
b.writeUInt32BE(0xffffffff);
b.readUInt32BE(0) == -1
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
When our estimates for a storage size are higher than the actual length
of decoded data, the destination buffer should be truncated. Otherwise
`Buffer::Length` will give misleading information to C++ layer.
fix#7365
Signed-off-by: Fedor Indutny <fedor@indutny.com>
`process.uptime()` interface will return the amount of time the
current process has been running. To achieve this it was caching the
`uv_uptime` value at program start, and then on the call to
`process.uptime()` returning the delta between the two values.
`uv_uptime` is defined as the number of seconds the operating system
has been up since last boot. On sunos this interface uses `kstat`s
which can be a significantly expensive operation as it requires
exclusive access, but because of the design of `process.uptime()` node
*had* to always call this on start. As a result if you had many node
processes all starting at the same time you would suffer lock
contention as they all tried to read kstats.
Instead of using `uv_uptime` to achieve this, the libuv loop already
has a concept of current loop time in the form of `uv_now()` which is
in fact monotonically increasing, and already stored directly on the
loop. By using this value at start every platform performs at least
one fewer syscall during initialization.
Since the interface to `uv_uptime` is defined as seconds, in the call
to `process.uptime()` we now `uv_update_time` get our delta, divide by
1000 to get seconds, and then convert to an `Integer`. In 0.12 we can
move back to `Number::New` instead and not lose precision.
Caveat: For some platforms `uv_uptime` reports time monotonically
increasing regardless of system hibernation, `uv_now` interface is
also monotonically increasing but may not reflect time spent in
hibernation.
Introduce new signature for both `dgram.createSocket` method and
`dgram.Socket` constructor:
dgram.createSocket(options, [listener])
Options should contain `type` property and may contain `reuseAddr`
property. When `reuseAddr` is `true` - SO_REUSEADDR will be issued on
socket on bind.
fix#7415
Signed-off-by: Fedor Indutny <fedor@indutny.com>
Socket may become not `readable`, but http should not rely on this
property and should not think that it means that no data will ever
arrive from it. In fact, it may arrive in a next tick and, since
`this.push(null)` was already called, it will result in a error like
this:
Error: stream.push() after EOF
at readableAddChunk (_stream_readable.js:143:15)
at IncomingMessage.Readable.push (_stream_readable.js:123:10)
at HTTPParser.parserOnBody (_http_common.js:132:22)
at Socket.socketOnData (_http_client.js:277:20)
at Socket.EventEmitter.emit (events.js:101:17)
at Socket.Readable.read (_stream_readable.js:367:10)
at Socket.socketCloseListener (_http_client.js:196:10)
at Socket.EventEmitter.emit (events.js:123:20)
at TCP.close (net.js:479:12)
fix#6784
This prevents segfaults when a native method is reassigned to a
different object (which corrupts args.This()). When unwrapping,
clients should use args.Holder() instead of args.This().
Closes#6690.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Increase the performance and simplify the logic of Buffer#write{U}Int*
and Buffer#read{U}Int* methods by placing the byte manipulation code
directly inline.
Also improve the speed of buffer-write benchmarks by creating a new
call directly to each method by using Function() instead of calling by
buff[fn].
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
The two biggest changes are that v8::Script::New() has been removed and
that a v8::Script object now has to be explicitly bound to a context if
you want to run it from another context.
We can accommodate both changes without breaking the vm module's public
API or even the internal JS API.
The test/simple/test-smalloc.js has an implicit assumption
of the byte order of the data stored for Double and Uint32
values. On a big endian platform this test fails without
these patches.
Use os.endianness() to detect the endian of the platform
and use it to gate the static value used for comparison.
Improve on commit b55c9d6 by not requiring that switches are comma
separated. This commit makes `./configure --v8-options="--foo --bar"`
work and takes special care to properly escape quotes in the options
string.
By building the fs.Stats object in JS, which is returned by all fs stat
functions, calls to v8::Object::Set() are removed. This also includes
creating all associated Date objects in JS, rather than using
v8::Date::New(). Both these changes have significant performance gains.
Note that the returned value from fs.stat changes slightly for non-POSIX
systems. Whereas before the stats object would be missing blocks and
blksize keys, it now has these keys with undefined as the value.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Move `createCredentials` to `tls` module and rename it to
`createSecureContext`. Make it use default values from `tls` module:
`DEFAULT_CIPHERS` and `DEFAULT_ECDH_CURVE`.
fix#7249
Include the "expected protocol" in the Error message
string, which evaluates to "http:" for the `http`
core module, and "https:" for the `https` module.
Closes#7355.
These are an old and deprecated properties that was used by previous
stream implementation, and are still in use in some user-land modules.
Prior to this commit, they were read from the underlying socket, which
may be non-readable/non-writable while connecting or while staying
uninitialized.
Force set them to `true`, just to make sure that there will be no
inconsistency.
fix#7152
Previously the build artifacts did not include a signed timestamp, so
when the certificate expired the validation of the artifact would fail.
Now we sign against a timestamp server such that the artifact will
always be valid regardless of the disposition of the certificate.
Closes#7360 and #7059.
Ensure that OpenSSL has enough entropy (at least 256 bits) for its PRNG.
The entropy pool starts out empty and needs to fill up before the PRNG
can be used securely.
OpenSSL normally fills the pool automatically but not when someone
starts generating random numbers before the pool is full: in that case
OpenSSL keeps lowering the entropy estimate to thwart attackers trying
to guess the initial state of the PRNG.
When that happens, we wait until enough entropy is available, something
that normally should never take longer than a few milliseconds.
Fixes#7338.
The default entropy source is /dev/urandom on UNIX platforms, which is
okay but we can do better by seeding it from OpenSSL's entropy pool.
On Windows we can certainly do better; on that platform, V8 seeds the
random number generator using only the current system time.
Fixes#6250.
NB: This is a back-port of commit 7ac2391 from the master branch that
for some reason never got back-ported to the v0.10 branch.
The default on UNIX platforms in v0.10 is different and arguably worse
than it is with master: if no entropy source is provided, V8 3.14 calls
srandom() with a xor of the PID and the current time in microseconds.
That means that on systems with a coarse system clock, the initial
state of the PRNG may be easily guessable.
The situation on Windows is even more dire because there the PRNG is
seeded with only the current time... in milliseconds.
* Documentation upgrades
* Fix glob bug which prevents proper README publishing
* node-gyp upgrade to 0.13
* Documentation updates
* Add --save-exact to save an exact dep (instead of a range)
* alias 't' to 'test'
The `Agent#request()` function was removed in
f3189ace6b, so don't
use it in the documentation example. The function
wasn't documented in the first place.
Default to the `defaultAgent.protocol` when comparing the
user-specified `options.protocol` string. This is so that
`http.Agent` instances do not need to specify their own
`protocol` field, since we have the relevant information
already from the `defaultAgent`.
Note that the test case could be separately cherry-picked
to the `v0.10` branch, since it already passes correctly.
Fixes#7349.
Fixes the regression described in: http://git.io/2ds-WQ
Turn off -Werror when building V8, it hits -Werror=unused-local-typedefs
with g++ 4.8. The warning itself is harmless so don't abort the build.
This was originally implemented in commit d2ab314e back in 2011 but the
build process has gone through a few iterations since then, that change
no longer works.
`env.h` is an internal header file and should not be copied or exposed
to the users.
Additionally, export convenience `Throw*` methods with `v8::Isolate*` as
a first argument.
Fix up the dtrace/etw/systemtap infrastructure after the V8 upgrade in
commit 1c7bf24. The win32 changes are untested but can hardly make
things worse because node doesn't build on windows right now.
Fixes#7313 with some luck.
Don't call DecodeWrite() with a Buffer as its argument because it in
turn calls StringBytes::Write() and that method expects a Local<String>.
"Why then does that function take a Local<Value>?" I hear you ask.
Good question but I don't have the answer. I added a CHECK for good
measure and what do you know, all of a sudden a large number of crypto
tests started failing.
Calling DecodeWrite(BINARY) on a buffer is nonsensical anyway: if you
want the contents of the buffer, just copy out the data, there is no
need to decode it - and that's exactly what this commit does.
Fixes a great many instances of the following run-time error in debug
builds:
FATAL ERROR: v8::String::Cast() Could not convert to string
Fix a regression that was introduced in commit ce04c726 after the
upgrade to V8 3.24.
The new weak persistent handle API no longer gives you the original
persistent but still requires that you clear it inside your weak
callback.
Rearrange the code in src/smalloc.cc to keep track of the persistent
handle with the least amount of pain and try hard to share as much
code as possible between the 'just free it' and 'invoke my callback'
versions of the smalloc API.
Fixes#7309.
Conform to the Google styleguide more and make cpplint happy, add more
CHECK macros.
Preemptively addresses cpplint's readability/check warnings ("Consider
using CHECK_GT instead of CHECK(a > b)".)
Make calls to v8::Isolate::AdjustAmountOfExternalAllocatedMemory() take
special care when negating 32 bits unsigned types like size_t.
Before this commit, values were negated before they got promoted to
64 bits, meaning that on 32 bits architectures, a value like 42 got
cast to 4294967254 instead of -42.
That in turn made the garbage collector start scavenging like crazy
because it thought the system was out of memory.
That's bad enough but calls to AdjustAmountOfExternalAllocatedMemory()
were made from weak callbacks, i.e. at a time when the garbage collector
was already busy. It triggered asserts in debug builds and caused
random crashes and memory corruption in release builds.
The behavior in release builds is arguably a V8 bug and should perhaps
be reported upstream.
Partially fixes#7309 but requires further bug fixes to src/smalloc.cc
that I'll address in a follow-up commit.
The variable isn't actually used uninitialized but g++ 4.8 doesn't know
that. Set it to NULL to silence the following compiler warning:
../src/string_bytes.cc:247:29: warning: 'data' may be used
uninitialized in this function [-Wmaybe-uninitialized]
unsigned a = hex2bin(src[i * 2 + 0]);
^
../src/string_bytes.cc:299:15: note: 'data' was declared here
const char* data;
^
V8 was upgraded from 3.22 to 3.24 in commit 1c7bf24. Upgrade source
files in test/addons/ and automatically generated tests from
doc/api/addons.markdown to the new V8 API.
This coincidentally fixes a bug in src/node_object_wrap.h where it was
still using the old V8 weak persistent handle interface, which is gone
in 3.24.
* ::jsstack -v prints function defintion
* ::jsprint works with objects with only numeric properties
* update tests to use builtin mdb_v8
* add more symbols to postmortem script - pending upstream
inclusion
Previously if you wanted to be notified of pending handles for pipes
you needed to use uv_read2_start, however in v0.11.22 you can query for
pending handles independently.
Internally we use hrtime to schedule when a timer will fire, to avoid
the perils of clock drift or other external operation making time go
backward. The timers ordering test should use the same timing mechanism
Fix the following valgrind warning:
Conditional jump or move depends on uninitialised value(s)
at 0x7D64E7: v8::internal::GlobalHandles::IterateAllRootsWithClassIds(v8::internal::ObjectVisitor*) (global-handles.cc:613)
by 0x94DCDC: v8::internal::NativeObjectsExplorer::FillRetainedObjects() (profile-generator.cc:2849)
# etc.
This was fixed upstream in r12903 and released in 3.15.2 but that commit
was never back-ported to the 3.14 branch that node.js v0.10 uses.
The code itself works okay; this commit simply shuffles the clauses in
an `if` statement to check that the node is in use before checking its
class id (which is uninitialized if the node is not in use.)
When sending a socket to a child process via IPC pipe,
`child_process.js` picks a raw UV handle from `_handle` property, sends
it, and assigns `null` to the property. Sending the same socket twice
was resulting in a runtime error, since we weren't handling the empty
`_handle` case.
In case of `null` `_handle` we should send just a plain text message
as passed it was passed to `.send()` and ignore the handle, letting
users handle such cases themselves instead of throwing the error at
runtime.
fix#5469
It's currently not really possible to compile native add-ons with
-fvisibility=hidden because that also hides the struct containing
the module definition.
The NODE_MODULE() and NODE_MODULE_DECL() macros are structured in
a way that makes it impossible to add a visibility attribute manually
so there is no escape hatch there.
That's why this commit adds an explicit visibility attribute to
the module definition. It doesn't help with node.js releases that
are already out there but at least it improves the situation going
forward.
If two timers run on the same tick, and the first timer uses a domain,
and then catches an exception and disposes of the domain, then the
second timer never runs. (And even if the first timer does not dispose
of the domain, the second timer could run under the wrong domain.)
This happens because timer.js uses "process.nextTick()" to schedule
continued processing of the timers for that tick. However, there was
an exception inside a domain, then "process.nextTick()" runs under
the domain of the first timer function, and will do nothing if
the domain has been disposed.
To avoid this, we temporarily save the value of "process.domain"
before calling nextTick so that it does not run inside any domain.
Previously if you cached process.nextTick and then require('domain')
subsequent nextTick() calls would not be caught because enqueued
functions were taking the wrong path. This keeps nextTick to a single
function reference and changes the implementation details after domain
has been required.
When `setImmediate(cb)` is called in `beforeExit` event handler the
consequent `uv_run(..., UV_RUN_NOWAIT)` may return `0`, even if there
was some active handles at start.
Fixes simple/test-beforeexit-event.js.
Unlike the 'exit' event, this event allows the user to schedule more
work and thereby postpone the exit. That also means that the
'beforeExit' event may be emitted many times, see the attached test
case for an example.
Refs #6305.
libuv gyp builds now require you to define the library disposition
(static or shared).
Also, libuv now supports vectored IO for file system reads and writes,
update to those function signatures
Between `ClientRequest` and `Agent`. The circular require was doing
weird things at load time, like making the `globalAgent` property
be `undefined` from within the context of the "_http_client"
module.
Removing the circular dependency completely fixes this.
This commit effectively removes the undocumented `Agent#request()`
and `Agent#get()` functions.
Don't invoke the `agent.requst()` or `agent.get()` functions
directly. Instead, use the public API and pass the agent
instance in as the `agent` option.
For the `request()` and `get()` functions. I could never
really understand why these two functions go through agent
first... Especially since the user could be passing `agent: false`
or a different Agent instance completely, in which `globalAgent`
will be completely bypassed.
Moved the relevant logic from `Agent#request()` into the
`ClientRequest` constructor.
Incidentally, this commit fixes#7012 (which was the original
intent of this commit).
This makes it so that the user may pass in a
`createConnection()` option, and they don't have
to pass `agent: false` at the same time.
Also adding a test for the `createConnection` option,
since none was in place before.
See #7014.
Expose `setBlocking` on Pipe's and if a pipe is being created for stdio
on windows then make the pipes blocking.
This fixes test-stream2-stderr-sync.js on Windows.
Fixes#3584
One test case in test-stream2-stderr-sync.js was creating a TTY
object using an undocumented constructor and passing in fd 2.
However, this is running in a child process and fd 2 is actually
a pipe, not a TTY.
The constructor fails on Windows and causes the handle type to be
left uninitialized, which later causes an assert to fail.
On Unix, the constructor fails to retrieve the windows size but unlike
on Windows, it just leaves the size fields undefined and continues
with initializing the stream type, yielding a semi-usable object.
I could make the Windows version match Unix behavior, but it
seems to me that the test is relying on an implementation detail of
an undocumented API, and the Unix behavior is not necessarily more
correct than the Windows one. Thus it makes more sense to remove this
test.
NodeBIO::Gets was reading off the end of a buffer if it
didn't find a "\n" before the EOF. This behavior
was causing X509 certificates passed to `https.Agent`
via the "ca" option to be silently discarded. It also
was causing improper parsing of certs and keys
passed to https.Agent, but those problems were worked
around in cdde9a3.
Backed out workaround in `lib/crypto.js` from ccde9a3,
which now isn't needed. But keep the test introduced
in that commit, which tests properly for this
bug.
This bug was first introduced in a58f93f
Gist containing test code, bisection log, and notes:
https://gist.github.com/maxtaco/9211605
The linker was optimizing the static variables that were supposed
to trigger module initialization.
I am making them non-static, and dllexport so that they don't get
optimized away.
Fixes#7116
Ensure that the behavior of `assert.deepEqual` does not depend on
argument ordering when comparing an `arguments` object with a
non-`arguments` object.
This test is particularly pathological, and requires a ton of time to
run, we need to find a better way to manage it but in general this path
is fairly safe these days.
bufferSize is now a getter that shows all that has not been
acknowledged by the os, as well as in the buffer state. The test is
only looking to verify the js verified state.
Scheduling of next ticks from within the next tick handler will result
in a tight execution loop where a timer cannot break into.
This test was invalid
We were being very aggressive in our connection creations, resulting
in the pipeline flood detection to drop us. Relax how fast we're
creating these connections so the gc can run all its tests.
It wasn't doing anything, and actually due to
3ae0b17c76, it was causing
the readline `prompt()` function to be overwritten
which throws an error in the REPL shortly after.
Expose localPort for binding to a specific port for outbound
connections.
If localAddress is not specified '0.0.0.0' is used for ip4 and '::'
for ip6 connections.
Fixes#7092
The reason this wasn't working was because after restart, when restoring
breakpoints the scripts wasn't loaded, so the breakpoint.script was
undefined. As a fix I added another check to use breakpoint.scriptReq
instead of breakpoint.script, which is the same except when the
breakpoint is a function.
fixes#7027
In some scenarios this will strip the DOF sections for DTrace, and in a
future world where we re-export all static libraries it would defeat
that purpose.
If an input stream would emit `end` event, like
`fs.createReadStream`, then readline need to get the last line
correctly even though that line isnt ended with `\n`.
Given the assert message, and the fact that endCb is always true
in the assert, I am pretty sure the test author was intending
to test for finishEvent, not endCb.
In this test, an HTTP server was ending the response before
consuming all the data sent in the PUT request.
Ending the response would cause the socket to be destroyed,
and since there is some data still to be read, an ECONNRESET is
surfaced on the client side, event though the client has already
ended its side and even seen a 'finish' event.
See:
http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.2.2
While it is certainly admissible for the server to send a response
before consuming the entire request, it seems reasonable to
expect that the server would close the connection afterwards
and that the ECONNRESET would be raised on the client.
So I have changed the test to wait until the entire request has been
consumed before sending the response.
Before sending a socket from a cluster master to a worker,
we would call listen in UV but not handle the error.
I made createServerHandle call listen on Windows so we get a chance
the handle any bind/listen errors early.
This fix is 100% windows specific.
It fixes test-cluster-bind-twice and
test-cluster-shared-handle-bind-error on Windows.
This implements the user-facing APIs that lets one run a child process
and block until it exits.
Logic shared with the async counterpart of each function was refactored
to enable code reuse.
Docs and tests are included.
Don't use argument as callback if it's not a valid callback function.
Throw a valid exception instead explaining the issue.
Adds to #7070 ("DNS — Throw meaningful error(s)").
The number of connections achieved by the test can vary by platform
and by machine. Lowering the acceptance threshold so that the
test passes on Windows.
Don't use argument as callback if it's not a valid callback function.
Throw a valid exception instead explaining the issue. Adds to #7070
("DNS — Throw meaningful error(s)").
Make vm.runInContext() and vm.runInNewContext() stop copying the Proxy
object from the parent context into the new context when --harmony or
--harmony_proxies is in effect because it overwrites the new context's
native Proxy object.
This commit also adds a regression test for Harmony symbols. They work
okay in the current implementation and the test should ensure it stays
that way.
Conditional globals like 'gc' should only be recognized when --expose_gc
is set. The global.gc feature check works only when done eagerly, else
it lets through a leaked variable called 'gc'.
Before, `new String('foo')` would be inspected as `"{}"` which
is simply not very helpful. Now, a more meaningful
`"[String: 'foo']"` result will be returned from `util.inspect()`.
Boxed String, Boolean, and Number types are all supported.
Closes#7047
Try embedding the ` ... ^` lines inside the `SyntaxError` (or any other
native error) object before giving up and printing them to the stderr.
fix#6920fix#1310
The AsyncListener API has been moved into the "tracing" module in order
to keep the process object free from unnecessary clutter.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Now the second field in asyncFlags will tell if the provider is
currently being watched, or listened for.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
These will be used to allow users to filter for which types of calls
they wish their callbacks to run.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
"flags" could mean one of many things, and multiple flag types could be
checked. So make the field more explicit on what type of flags are being
stored.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
Add a new 'tracing' module with a v8 property that lets the user
register listeners for gc events. The listeners are invoked after
every garbage collection cycle with 'before' and 'after' statistics.
Useful for monitoring tools that want to keep track of memory usage.
Create a new HandleScope before looking up the object context with
v8::Object::CreationContext(), else we leak the Local<Context> into
the current HandleScope.
That's relatively harmless unless the HandleScope is long-lived and
MakeCallback() is called a lot. In a scenario like that, we may end
up leaking a lot of memory.
What is unfortunate about this change is that we're trying hard to
eradicate the node_isolate global. Longer term, we will probably have
to change the MakeCallback() prototype to one that requires an explicit
v8::Isolate* argument.
Make it possible to invoke MakeCallback() on a v8::Value but only for
the variant that takes a v8::Function as the thing to call.
The const char* and v8::String variants still require a v8::Object
because the function to call is looked up as a property on the receiver,
but that only works when the receiver is an object, not a primitive.
If the call to writeBuffer completes asynchronously, we need to have
an oncomplete callback on the request object no matter what. The
writeQueueSize seems irrelvant to that regard.
Note that on Windows writeBuffer always completes asynchronously.
See related commit 9836a4eeda
Update the list of root certificates in src/node_root_certs.h with
tools/mk-ca-bundle.pl and update src/node_crypto.cc to make use of
the new format.
Fixes#6013.
`tls_wrap.cc` was crashing in an `Unwrap` call, when non
`SecureContext` object was passed to it. Check that the passed object
is a `SecureContext` instance before unwrapping it.
fix#7008
Original commit message:
VS2013 contains a number of improvements, most notably the addition
of all C99 math functions.
I'm a little bit concerned about the change I had to make in
cpu-profiler.cc, but I spent quite a bit of time looking at it and was
unable to figure out any rational explanation for the warning. It's
possible it's spurious. Since it seems like a useful warning in
general though, I chose not to disable globally at the gyp level.
I do think someone with expertise here should probably try to
determine if this is a legitimate warning.
BUG=288948
R=dslomov@chromium.org
Review URL: https://codereview.chromium.org/23449035
NOTE: Path applied without `cpu-profiler.cc` changes because in our
version it was looking totally different.
The test is no longer valid for the original scenario.
It now fails intermittently because of two other issues:
1. Since the client is only processing one readable event, the
client request is not enough to keep the process alive and the
process can exit before the desired events have been raised.
2. Reading just 1 byte is not enough to guarantee that the parser
will eventually consume all the data and raise the desired
parse error. I tried postponing the server.close() to address
the issue at [1], but then the test just hangs sometimes.
Even if stdio streams are opened as file streams, we should not ever try
to close them. This could be accomplished by passing `autoClose: false`
in options on their creation.
Even if stdio streams are opened as file streams, we should not ever try
to close them. This could be accomplished by passing `autoClose: false`
in options on their creation.
This was originally introduced in 6034701 to prevent the closing
brace being pushed onto the next line if an object is longer than
the max width, however the functionality was removed in d164989 but
the supplementary variables (and operations) were left behind
This matches how libuv handles the definition of ssize_t, by
typedef'ing intptr_t to ssize_t.
However, in the future we will use portable types from stddef.h
It's saner to check exit codes or signals to determine if the process
actually aborted. On OSX and Linux the exit code is 134, on SunOS it
propagates the SIGABRT signal
Built-in modules should be automatically registered, replacing the
static module list. Add-on modules should also be automatically
registered via DSO constructors. This improves flexibility in adding
built-in modules and is also a prerequisite to pure-C addon modules.
Right now no default ciphers are use in, e.g. https.get, meaning that
weak export ciphers like TLS_RSA_EXPORT_WITH_DES40_CBC_SHA are
accepted.
To reproduce:
node -e "require('https').get({hostname: 'www.howsmyssl.com', \
path: '/a/check'}, function(res) {res.on('data', \
function(d) {process.stdout.write(d)})})"
The test was not waiting for all the worker-created sockets
to be listening before calling cluster.disconnect().
As a result, the channels with the workers could get closed
before all the socket handles had been passed to them, leading
to various errors.
Original commit message:
ares_parse_txt_reply: return a ares_txt_reply node for each sub-string
Previously, the function would wrongly return all substrings merged into
one.
fix#6931
Socket may become not `readable`, but http should not rely on this
property and should not think that it means that no data will ever
arrive from it. In fact, it may arrive in a next tick and, since
`this.push(null)` was already called, it will result in a error like
this:
Error: stream.push() after EOF
at readableAddChunk (_stream_readable.js:143:15)
at IncomingMessage.Readable.push (_stream_readable.js:123:10)
at HTTPParser.parserOnBody (_http_common.js:132:22)
at Socket.socketOnData (_http_client.js:277:20)
at Socket.EventEmitter.emit (events.js:101:17)
at Socket.Readable.read (_stream_readable.js:367:10)
at Socket.socketCloseListener (_http_client.js:196:10)
at Socket.EventEmitter.emit (events.js:123:20)
at TCP.close (net.js:479:12)
fix#6784
The test was calling server.close() after write on the socket
had completed. However the fact that the write had completed was
not valid indication that the server had received the data.
This would result in a premutaure closing of the server and
an ECONNRESET event on the client.
When creating TLSSocket on top of the regular socket that already
contains some received data, `_tls_wrap.js` should try to write all that
data to the internal `SSL*` instance.
fix#6940
* uv: Upgrade to v0.10.23
* npm: Upgrade to v1.3.24
* v8: Fix enumeration for objects with lots of properties
* child_process: fix spawn() optional arguments (Sam Roberts)
* cluster: report more errors to workers (Fedor Indutny)
* domains: exit() only affects active domains (Ryan Graham)
* src: OnFatalError handler must abort() (Timothy J Fontaine)
* stream: writes may return false but forget to emit drain (Yang Tianyang)
When the domain specific code was reintroduced in 828f145 the
conditional to check and clear the nextTickQueue if many items had run
was not introduced. This allows for the application to run out of memory
if domains are being used in an infinite recursive loop.
ERR_load_crypto_strings() registers the error strings for
all libcrypto functions, SSL_load_error_strings() does the
same, but also registers the libssl error strings.
Make the HMAC digest method configurable. Update crypto.pbkdf2() and
crypto.pbkdf2Sync() to take an extra, optional digest argument.
Before this commit, SHA-1 (admittedly the most common method) was used
exclusively.
Fixes#6553.
Now that the context stores the active execution stack, and because
removeAsyncListener() always removed the AsyncListener from the queue
and the stack, there's no need to keep a stack around anymore. Instead
the active asyncQueue and the currentContext is able to handle it all.
Signed-off-by: Forrest L Norvell <ogd@aoaioxxysz.net>
Performance gains are ~4x (~1.5us), but still much slower than a naive
approach. There is some duplicate work done between join(), normalize()
and normalizeArray() so additional optimizations are possible.
Note that this only improves the POSIX implementation.
Thanks to @isaacs and @othiym23 for helping with this optimization.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
After one of OpenSSL updates we have stopped accepting PEM private keys
and certificates that doesn't end with a newline (`\n`) character.
Handle this regression in `crypto.js` to make less trouble to our users.
fix#6892
Do not throw in internal C++ methods, that clobbers logic and may lead
to the situations, where both exception was thrown and the value was
returned (via `args.GetReturnValue().Set()`). That doesn't play nicely
with v8.
fix#6912
Now that process.createAsyncListener() returns a unique object instance
it is no longer necessary to compare the uid's of the objects.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
It was possible that the same AL instance was run twice if it were both
attached to the currentContext then again added to the new asyncQueue
generated for the new stack.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
The ability to add/remove an AsyncListener to an object after its
creation was an artifact of trying to get AL working with the domain
module. Now that is no longer necessary and other features are going to
be implemented that would be affected by this functionality. So the code
will be removed for now to simplify the implementation process.
In the future this code will likely be reintroduced, but after some
other more important matters have been addressed.
None of this functionality was documented, as is was meant specifically
for domain specific implementation work arounds.
Signed-off-by: Timothy J Fontaine <tjfontaine@gmail.com>
All C++ code should be using `args.GetIsolate()` or `env->isolate()`.
Using static `node_isolate` var limits possible future functionality
(like multi-isolate support).
This test was originally intended to guard against regressions for
commit 16b59cbc74.
As such, it only needs to ensure that process exit has not been held up
by the date cache timer, which would fire on the next second.
We now wait to connect to the debuggee until we know that
its error stream has data, to ensure that the output message
"connecting..... ok" appears after "Debugger listening on port xyz"
I also increased the test timeout to let the more complex
tests finish in time on Windows
This change fixes the following unit tests on Windows:
test-debugger-repl.js
test-debugger-repl-term.js
test-debugger-repl-utf8.js
test-debugger-repl-restart.js
addon_register_func and its cousin addon_context_register_func are type
definitions, dllimport and dllexport are name mangling directives, i.e.
they're quite unrelated concepts. MinGW complains about mixing them
when cross-compiling native add-ons.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Signed-off-by: Bert Belder <bertbelder@gmail.com>
Before this commit, verification exceptions had err.message set to the
OpenSSL error code (e.g. 'UNABLE_TO_VERIFY_LEAF_SIGNATURE').
This commit moves the error code to err.code and replaces err.message
with a human-readable error. Example:
// before
{
message: 'UNABLE_TO_VERIFY_LEAF_SIGNATURE'
}
// after
{
code: 'UNABLE_TO_VERIFY_LEAF_SIGNATURE',
message: 'unable to verify the first certificate'
}
UNABLE_TO_VERIFY_LEAF_SIGNATURE is a good example of why you want this:
the error code suggests that it's the last certificate that fails to
validate while it's actually the first certificate in the chain.
Going by the number of mailing list posts and StackOverflow questions,
it's a source of confusion to many people.
Spawn's arguments were documented to be optional, as they are for the
other similar child_process APIs, but the code was missing. Result was
`child_process.spawn('node', {})` errored when calling slice() on an
Object, now it behaves as the documentation said it would.
domain.create().exit() should not clear the domain stack if the domain
instance does not exist within the stack.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
spawn stdio options can be a 'stream', but the following code
fails with "Incorrect value for stdio stream: [object Object]",
despite being a stream. The problem is the test isn't really
for a stream, its for an object with a numeric `.fd` property,
and streams do not have an fd until their async 'open' event
has occurred. This is reasonable, but was not documented.
child_process.spawn('date', [], {stdio: [
'ignore',
fs.createWriteStream('out.txt',{flags:'a'}),
'ignore']})
The RR cluster scheduler replaces the normal StreamWrap handle. Because
of this the AsyncListener method failed to be in place when domains were
in use.
The issue was resolved in 828f145 by reverting having domains use
AsyncListeners.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
Before when an AsyncListener object was created and the "create"
callback returned a value, it was necessary to construct a new Object
with the same callbacks but add a place for the new storage value.
Now, instead, a separate storage array is kept on the context which is
used for any return value of the "create" callback. This significantly
reduces the number of Objects that need to be created.
Also added a flags property to the context to quickly check if a
specific callback was available either on the context or on the
AsyncListener instance itself.
Few other minor changes for readability that were difficult to separate
into their own commit.
This has not been optimized yet.
This is a slightly modified revert of bc39bdd.
Getting domains to use AsyncListeners became too much of a challenge
with many edge cases. While this is still a goal, it will have to be
deferred for now until more test coverage can be provided.
Forcibly disable -Werror, the old { 'werror': '' } hack in node.gyp
no longer works with newer versions of V8.
We support a wide range of compilers, it's simply not feasible to
squelch all warnings, never mind that the libraries in deps/ are
not under our control.
Fixes#6817.
If a write is above the highWaterMark, _write still manages to
fully send it synchronously, _writableState.length will be adjusted down
to 0 synchronously with the write returning false, but 'drain' will
not be emitted until process.nextTick.
If another small write which is below highWaterMark is issued before
process.nextTick happens, _writableState.needDrain will be reset to false,
and the drain event will never be fired.
So we should check needDrain before setting it up, which prevents it
from inproperly resetting to false.
Instead of checking the uid on the array index of the queue, instead the
object property "uid" was checked on the queue iteself. Because this
will always evaluate to "undefined" the same listener could be added
multiple times to the same context.
There was a flaw in the old API that has been fixed. Now the
asyncListener callback is now the "create" object property in the
callback object, and is optional.
The fact that the "exit" event passes the exit code as an argument
as omitted from the documentation. This adds the explanation and
augments the example code to show that.
Master was disconnecting its workers as soon as they both started up.
Meanwhile, the workers were trying to listen. Its a race, sometimes the
disconnect would happen between when worker gets the response message,
and acks that message with a 'listening'. This worked OK after v0.11
introduced a behaviour where disconnect would always exit the worker,
but once that backwards-incompatible behaviour is removed, the worker
lives long enough to try and respond to the master, and child_process
errors at the attempt to send from a disconnected child.
This is a problem present in both v0.10, and v0.11, where the 'setup'
event is synchronously emitted by `cluster.setupMaster()`, a mostly
harmless anti-pattern.
Fix inadvertent v0.11 changes to the definition of suicide, particularly
the relationship between suicide state, the disconnect event, and when
exit should occur.
In v0.10, workers don't forcibly exit on disconnect, it doesn't give
them time to do a graceful finish of open client connections, they exit
under normal node rules - when there is nothing left to do. But on
unexpected disconnect they do exit so the workers aren't left around
after the master.
Note that a test as-written was invalid, it failed against the v0.10
cluster API, demonstrating that it was an undocumented API change.
Fixes issue in 0.11 where callback doesn't occur if worker count is
currently zero. In 0.10 callback occurs after worker count is zero, and
occurs in next tick if worker count is currently zero.
QueryString.stringify() allowed a fourth argument that was used as a
conditional in the return value, but was undocumented, not used by core
and always was always false/undefiend. So the argument and conditional
have been removed.
Signed-off-by: Trevor Norris <trev.norris@gmail.com>
After landing 6ed861d it is no longer possible to reliably monkey-patch
the EventEmitter constructor. However there's valid use cases for that,
and makes for easier debugging. Therefore, move the guts of the
constructor to a separate function which is monkey-patchable.
Closes#6693
The UNIX domain is also known as the LOCAL domain (AF_LOCAL), and
node/libuv implements it on Windows using named pipes. The API
documentation did not describe the naming rules for named pipes, and
also repeatedly described `listen(path)` as being UNIX, which it is not
on Windows.
Closes#6743
Removing a hack intended to shortcut the resolution of 'localhost'
but which doesn't work for ipv6.
This was introduced in 2876141c42.
However it seems that the problems that this was trying to
circumvent has gone away ages ago, when dns resolution on
Windows started relying on Win32 GetAddrInfoW, which was
probably with be2320d408.
Fixes test-net-connect-options-ipv6.js on Windows.
The %p is replaced with the current PID. This used to work in node.js
v0.9.7 but it seems to have been lost somewhere along the way.
This commit makes the fix from 6b713b52 ("cluster: make --prof work for
workers") work again. Without it, all log data ends up in a single
file and is unusable because the addresses are all wrong.
Eliminate a race condition between uv_async_send and the closing of the
corresponding handle.
Also made errors in Watchdog constructor call abort()
Fixes#6088
The 1.3.19 release had a critical bug: any packages published with it
could not be installed, because the shasum would be incorrect.
Thankfully, 1.3.19 was published using 1.3.19, so could not be installed
by any users! However, if it goes out as part of a Node.js release,
then obviously that would be a problem.
This is a comment change, where it originally says disabling TLS
Compression protects against BEAST attack. But in fact, it is the
CRIME attack(Compression Ratio Info-leak Made Easy) that makes use
of TLS Compression and not BEAST.
BEAST(Browser Exploit Against SSL/TLS) is an entirely another variant
making use of the chosen boundary attack against CBC mode in
encryption.
Just making sure, that the exact reason for disabling TLS compression
must be made clear and not be misleading with some other attack.
Quoting CVE-2013-6639:
The DehoistArrayIndex function in hydrogen-dehoist.cc in Google V8
before 3.22.24.7, as used in Google Chrome before 31.0.1650.63,
allows remote attackers to cause a denial of service (out-of-bounds
write) or possibly have unspecified other impact via JavaScript code
that sets the value of an array element with a crafted index.
Quoting CVE-2013-6640:
The DehoistArrayIndex function in hydrogen-dehoist.cc in Google V8
before 3.22.24.7, as used in Google Chrome before 31.0.1650.63,
allows remote attackers to cause a denial of service (out-of-bounds
read) via JavaScript code that sets a variable to the value of an
array element with a crafted index.
Like 6b92a7, this is unlikely to affect node.js because it only runs
local, trusted code. However, if there exists some module somewhere
that populates an array index with remotely provided data this could
very well be used to crash a remote server running node. Defense in
depth and all.
This is a backport of upstream commit r17801. Original commit log:
Limit size of dehoistable array indices
LOG=Y
BUG=chromium:319835,chromium:319860
R=dslomov@chromium.org
Review URL: https://codereview.chromium.org/74113002
The test is expecting an invalid result for the loopback
interface network mask, but this issue was fixed in
libuv commit 1d5c61a8b31257733c41fb507762d3eb56eecb2d
Closes#5262#6673
When `symlink`, `link` or `rename` report EEXIST, ENOTEMPTY or EPERM -
the destination file name should be included in the error message,
instead of source file name.
fix#6510
NOTE: Also removed `.receivedShutdown` method of `Connection` it wasn't
documented anywhere, and was rewritten with `true` after receiving
`close_notify`.
fix#6638
FSEventStream may emit events that happened right before it has started.
Ignore changes emitted for the directory itself, since they may come
from the stale events.
This was failing if the file didn't already exist.
Fixes unit tests on Windows:
* test\simple\test-http-curl-chunk-problem.js
* test\simple\test-pipe-file-to-http.js
This adds two new member functions getAuthTag and setAuthTag that
are useful for AES-GCM encryption modes. Use getAuthTag after
Cipheriv.final, transmit the tag along with the data and use
Decipheriv.setAuthTag to have the encrypted data verified.
gyp by default now tries to process gyp files in parallel by using
python's multiprocessing module, but it has problems on oddball
platforms. We don't have many files or complex dependency chains that
would benefit from parallel processing so disable by deafult
fixes#6640
The android generator for gyp currently doesn't support
--generator-output - this makes embedding node.js as project dependency
difficult for android projects.
Note: the generated files in deps/uv should be ignored in libuv's
.gitignore
1. Swallow errors when sending internal NODE_HANDLE_ACK messages, so
they don't crash the process.
2. Queue process.disconnect() if there are any pending queued messages.
Fixes test-child-process-fork-net2.js on win.
Wildcard server names should not match subdomains.
Quote from RFC2818:
...Names may contain the wildcard
character * which is considered to match any single domain name
component or component fragment. E.g., *.a.com matches foo.a.com but
not bar.foo.a.com. f*.com matches foo.com but not bar.com.
fix#6610
Adds a --with-icu-path= switch to the configure script. Requires that
the user checks out the copy of libicu that's bundled with chromium to
a fixed directory. It's still a little rough around the edges but it
works.
Fixes#6371.
When calling `encOut` in loop, `maybeInitFinished()` may invoke
`clearOut`'s loop, leading to the writing of interleaved data
(encrypted and cleartext) into the one shared pool.
Move `maybeInitFinished()` out of the loop and add assertion for
future.
The null signal test existed, but only tested the case where the target
process existed, not when it did not exist.
Also clarified that SIGUSR1 is reserved by Node.js only for receiveing,
its not at all reserved when sending a signal with kill().
kill(pid, 'O_RDWR'), or any other node constant, "worked". I fixed this
by also checking for 'SIG'. The same as done in the isSignal() function.
Now the signal names supported by process.kill() are the same as those
supported by process.on().
Previously we were building the symbols, but the linker was garbage
collecting the symbols because they weren't used. Inform the linker
that we want to keep all symbols from v8 around.
HTTP Parser instance was freed twice, leading to the reusal of it
in several different requests simultaneously.
The flow:
`socketCloseListener` is firing, which calls `socket.read()` to flush
any queued data, `socket.buffer` has data which emits and fires
`socketOnData` in sync, this triggers a parser error which frees the
parser, `socketCloseListener` resumes execution only to have the wrong
parser associated with the socket.
The fix is to only cache the parser after the flushing from the socket,
and to assert in `socketOnData` that `socket === parser.socket`
fix#6451
Replace call to Number::New() with a call to Integer::NewFromUnsigned().
Profiling a Real World(TM) application with perf(1) suggests that the
conversion of its argument from integer to double is disproportionally
costly: over 60% of CPU cycles accountable to WriteStringImpl() are
attributable to the conversion.
After changing it to Integer::NewFromUnsigned(), WriteStringImpl()
has dropped from the 'most costly functions' top ten altogether.
Add a 'serialNumber' property to the object that is returned by
tls.CryptoStream#getPeerCertificate(). Contains the certificate's
serial number encoded as a hex string. The format is identical to
`openssl x509 -serial -in path/to/certificate`.
Fixes#6583.
Format negative zero as '-0' instead of as '0', as it does not behave
identically to positive zero. ((-0).toString() still returns '0' as
required by ES5 9.8.1.2).
Fixesjoyent/node#6548.
Closesjoyent/node#6550.
context._asyncQueue shouldn't be exposed as asyncQueue, as it allows
modification of queues already attached to an event. Which is not
supposed to happend. Instead context._asyncQueue should be copied.
Check that `listeners` is actually an array before trying to manipulate it
because it won't be if no regular event listeners have been registered yet
but there are 'removeListener' event listeners.
Removing the depth counter while processing the nextTickQueue made it
possible to run out of memory if in an infinite recursive loop using
nextTick(). There was also an edge case where too many callbacks were
pushed onto the nextTickQueue, while not actually being recursive.
This is being done to prevent possible cryptic FATAL ERROR messages from
popping up, and issues being posted about them.
* uv: upgrade to v0.11.15 (Timothy J Fontaine)
* v8: upgrade to 3.22.24.5 (Timothy J Fontaine)
* buffer: remove warning when no encoding is passed (Trevor Norris)
* build: make v8 use random seed for hash tables (Ben Noordhuis)
* crypto: build with shared openssl without NPN (Ben Noordhuis)
* crypto: update root certificates (Ben Noordhuis)
* debugger: pass on v8 debug switches (Ben Noordhuis)
* domain: use AsyncListener API (Trevor Norris)
* fs: add recursive subdirectory support to fs.watch (Nick Simmons)
* fs: make fs.watch() non-recursive by default (Ben Noordhuis)
* http: cleanup freeSockets when socket destroyed (fengmk2)
* http: force socket encoding to be null (isaacs)
* http: make DELETE requests set `req.method` (Nathan Rajlich)
* node: add AsyncListener support (Trevor Norris)
* src: remove global HandleScope that hid memory leaks (Ben Noordhuis)
* tls: add ECDH ciphers support (Erik Dubbelboer)
* tls: do not default to 'localhost' servername (Fedor Indutny)
* tls: more accurate wrapping of connecting socket (Fedor Indutny)
After the uv upgrade, uv_spawn will now fail faster for certain
failures like ENOENT. However, our tests and other people may be
depending on that error being passed to the callback instead of a
throw.
v8's `messages.js` file's `CallSiteGetMethodName` is running through all
object properties and getter to figure out method name of function that
appears in stack trace. This run-through will also read `fd` property of
`UDPWrap` instance's javascript object, making `UNWRAP()` fail.
As a simple alternative to the test case above, one could just keep
reference to the dgram handle and try accessing `handle.fd` after it has
been fully closed.
fix#6536
Before this commit, passing --debugger and other V8 debug switches to
node.js made node print a usage message and exit.
Rewrite the debug argument parser so it only consumes switches that we
understand and pass everything else as-is to V8.
A side effect of this change is that switches like --debugger_agent and
--debugger_port now work. That kind of obsoletes our debugger switches
because they implement pretty much the same functionality but let's
leave them in for now for the sake of convenience and backwards
compatibility.
Fixes#6526.
Buffer#write() was showing the deprecation warning when only
buf.write('string') was passed. This is incorrect since the encoding is
always optional.
Argument order should follow:
Buffer#write(string[, offset[, length]][, encoding])
(yeah, not confusing at all)
Emitting an event within a `EventEmitter#once` callback of the same
event name will cause subsequent `EventEmitter#once` listeners of the
same name to be called multiple times.
var emitter = new EventEmitter();
emitter.once('e', function() {
emitter.emit('e');
console.log(1);
});
emitter.once('e', function() {
console.log(2);
});
emitter.emit('e');
// Output
// 2
// 1
// 2
Fix the issue, by calling the listener method only if it was not
already called.
BaseObject is a class that just handles the Persistent handle attached
to the class instance.
This also removed WeakObject. Reordering the inheritance chain helps
prevent unneeded calls on instances that don't call MakeCallback.
Make it more difficult to accidentally leak handles by removing the
top-level HandleScope. Now if there's no valid HandleScope now, V8
will complain and, in debug builds, abort.
* npm: Upgrade to 1.3.14
* uv: Upgrade to v0.10.19
* child_process: don't assert on stale file descriptor events (Fedor Indutny)
* darwin: Fix "Not Responding" in Mavericks activity monitor (Fedor Indutny)
* debugger: Fix bug in sb() with unnamed script (Maxim Bogushevich)
* repl: do not insert duplicates into completions (Maciej Małecki)
* src: Fix memory leak on closed handles (Timothy J Fontaine)
* tls: prevent stalls by using read(0) (Fedor Indutny)
* v8: use correct timezone information on Solaris (Maciej Małecki)
Fixes a 4 byte leak on handles closing. AKA The Walmart leak.
MakeCallback doesn't have a HandleScope. That means the callers scope
will retain ownership of created handles from MakeCallback and related.
There is by default a wrapping HandleScope before uv_run, if the caller
doesn't have a HandleScope on the stack the global will take ownership
which won't be reaped until the uv loop exits.
If a uv callback is fired, and there is no enclosing HandleScope in the
cb, you will appear to leak 4-bytes for every invocation. Take heed.
cc @hueniverse
`timezone` variable contains the difference, in seconds, between UTC and
local standard time (see `man 3 localtime` on Solaris).
Call to `tzset` is required to apply contents of `TZ` variable to
`timezone` variable.
BUG=v8:2064
Review URL: https://chromiumcodereview.appspot.com/10967066
Patch from Maciej Małecki <me@mmalecki.com>.
This is a back-port of upstream commit r12802 and a forward port of
commit 9fa953d from the v0.8 branch. V8 3.22 in the master branch
contains the patch so no further forward-porting is necessary.
Fix invalid `hasOwnProperty` function usage.
For example, before in the REPL:
```
> Ar<Tab>
Array
Array ArrayBuffer
```
Now:
```
> Ar<Tab>
Array
ArrayBuffer
```
Fixes#6255.
Closes#6498.
Create a HandleScope before calling the Environment::GetCurrent() that
takes a v8::Isolate* as an argument because it creates a handle with
the call to v8::Isolate::CurrentContext().
This commit removes the simple/test-event-emitter-memory-leak test for
being unreliable with the new garbage collector: the memory pressure
exerted by the test case is too low for the garbage collector to kick
in. It can be made to work again by limiting the heap size with the
--max_old_space_size=x flag but that won't be very reliable across
platforms and architectures.
Update the list of root certificates in src/node_root_certs.h with
tools/mk-ca-bundle.pl and update src/node_crypto.cc to make use of
the new format.
Fixes#6013.
The security fix from commit 6b92a713 also back-ported the test case.
Said test case relies on API that is only available in newer versions
of V8 and, as a result, broke the `make native` and `make <arch.mode>`
builds. This commit reverts that part of the back-port. Fixes the
following build error:
../test/cctest/test-api.cc: In function ‘void TestRegress260106()’:
../test/cctest/test-api.cc:17712:34: error: ‘class v8::Context’ has
no member named ‘GetIsolate’
Upstream V8 as of commit v8/v8@4bc70e8 uses a fixed seed of 314159265
for hash tables unless instructed otherwise. Tell V8 to keep using a
random seed.
CONTAINER_OF was introduced a while ago but was not used consistently
everywhere yet. This commit fixes that.
Why CONTAINER_OF instead of container_of? The former makes it crystal
clear that it's a macro, not a function.
Unbreak the build when linking against a shared version of OpenSSL that
doesn't support NPN (Next Protocol Negotiation.)
Fixes the following build error:
../src/node_crypto.cc:140: error: no member function
'AdvertiseNextProtoCallback' declared in
'node::crypto::SSLWrap<node::TLSCallbacks>'
../src/node_crypto.cc:147: error: no member function
'SelectNextProtoCallback' declared in
'node::crypto::SSLWrap<node::TLSCallbacks>'
Otherwise it might get stall (`Peek()` will return zero-length chunk)
in following situation:
1. `Write(kBufferLength)`
2. `Read(kBufferLength)`
3. `Write(anything)`
4. `Peek()` => `len=0`
Otherwise the string triggers an assertion error in node_http_parser.c,
line 370:
assert(Buffer::HasInstance(args[0]) == true);
because the first argument is not a Buffer object.
When socket, passed in `tls.connect()` `options` argument is not yet
connected to the server, `_handle` gets assigned to a `net.Socket`,
instead of `TLSSocket`.
When socket is connecting to the remote server (i.e. not yet connected,
but already past dns resolve phase), derive `_connecting` property from
it, because otherwise `afterConnect()` will throw an assertion.
fix#6443
|i| and |j| arent't used when building without crypto support. Hat tip
to Brian White.
Rename |l| to |k| while we're here because it's quite hard to discern
from |i| or |j| with some fonts.
The domain module has been switched over to use the domain module API as
much as currently possible. There are still some hooks in the
EventEmitter, but hopefully we can remove those in the future.
pbkdf2_req has been renamed to PBKDF2Request and converted to a class.
It now uses AsyncWrap::MakeCallback.
Also includes, using env()->ondone_string() instead of "ondone" and
using malloc instead of new char[].
Since RandomBytesRequest makes a call to MakeCallback, needed it to be
a class so AsyncWrap could handle any async listeners.
Also added a simple test for an issue had during implementation where
the memory was being released and returned.
AsyncListener is a JS API that works in tandem with the AsyncWrap class
to allow the user to be alerted to key events in the life cycle of an
asynchronous event. The AsyncWrap class has its own MakeCallback
implementation that core will be migrated to use, and uses state sharing
techniques to allow quicker communication between JS and C++ whether the
async event callbacks need to be called.
Profiling suggested that on Linux sometimes over 10% of CPU time was
being spent inside the systemtap probe entry points in the binding
layer, even when the process was not actively being traced with the
`stap` tool.
That's why this commit makes it possible to use the *_ENABLED() macros
and bail out early when we're not being traced, reducing the overhead
of unused probes to (almost) zero.
Said macros were already being generated by `dtrace -h` but were not
usable because they rely on external definitions. To remedy that, we
now generate the accompanying object files with `dtrace -G`.
This commit includes a change to libuv that has been landed upstream in
commit joyent/libuv@3c172ea.
When `tls.connect()` is called with `socket` option, it should try to
reuse hostname previously passed to `net.connect()` and only after that
fall back to `'localhost'`.
fix#6409
Currently fs.watch does not have an option to specify if a directory
should be recursively watched for events across all subdirectories.
Several file watcher APIs support this. FSEvents on OS X > 10.5 is
one example. libuv has added support for FSEvents, but fs.watch had
no way to specify that a recursive watch was required.
fs.watch now has an additional boolean option 'recursive'. When set
to true, and when supported, fs.watch will return notifications for
the entire directory tree hierarchy rooted at the specified path.
There was no need to share state between C++ and JS for these two
values. So they have been moved to their respective locations. This will
help performance only a tiny bit, but it does help code complexity much
more.
We need to keep ObjectWrap around for module authors (we think), but
v8 3.21 broke node_object_wrap.h with respect to MSVC. Coincidentally,
we no longer use ObjectWrap at all in core, and native modules might
as well use their own entirely internal implementation if they need it.
Turns out that we don't use node_object_wrap.h any more in core,
and, with v8 3.21, it's breaking our Windows build. Removing refs
to it everywhere (and adding node.h in one case where it was the
only way node.h was being included), we have restored the Windows
build.
Previous behaviour was to drop to an openssl prompt
("Enter PEM pass phrase:") when supplying a private key with a
passphrase. This change adds a fourth, optional, paramter that
will be used as the passphrase.
To include this parameter in a backwards compatible way it was
necessary to expose the previously undocumented (and unexposed)
feature of being able to explitly setting the output encoding.
This addresses a current shortcoming of the V8 SetNamedPropertyHandler
function.
It does not provide a way to intercept Object.defineProperty(..) calls.
As a result, these properties are not copied onto the contextified
sandbox when a new global property is added via either a function
declaration or a Object.defineProperty(global, ...) call.
Note that any function declarations or Object.defineProperty() globals
that are created asynchronously (in a setTimeout, callback, etc.) will
happen AFTER the call to copy properties, and thus not be caught.
The way to properly fix this is to add some sort of a
Object::SetNamedDefinePropertyHandler() function that takes a callback,
which receives the property name and property descriptor as arguments.
Luckily, such situations are rare, and asynchronously-added globals
weren't supported by Node's VM module until 0.12 anyway. But, this
should be fixed properly in V8, and this copy function should be removed
once there is a better way.
Fix#6416
The list of supported HTTP methods is available in JS land now so there
is no longer any need to pass a stringified version of the method to the
parser callback, it can look up the method name for itself.
Saves a call to v8::Eternal::Get() in the common case and a costly
v8::String::NewFromOneByte() in the uncommon case.
Make the build rule depend on the build artifact (weakref.node) itself
rather than the directory it's built in. Depending on the directory
means that a build failure won't trigger a rebuild on the next
invocation because the directory's timestamp has been updated.
This is a back-port of commit 1189571 from the master branch that
hopefully fixes the following CI error:
executing: make test/gc/node_modules/weak/build/
make: *** No rule to make target `test/gc/node_modules/weak/build/'.
Command exited with non-zero: make test/gc/node_modules/weak/build/
Build step 'Execute NodeJS script' marked build as failure
When the socket closes, the client's http incoming message object was
emitting an 'aborted' event if it had not yet been ended.
However, it's possible, when a response is being repeatedly paused and
resumed (eg, if piped to a slow FS write stream), that there will be a
final chunk remaining in the js-land buffer when the socket is torn
down.
When that happens, the socketCloseListener function detects that we have
not yet reached the end of the response message data, and treats this as
an abrupt abort, immediately (and forcibly) ending the incoming message
data stream, and discarding that final chunk of data.
The result is that, for example, npm will have problems because tarballs
are missing a few bytes off the end, every time.
Closes GH-6402
Make the build rule depend on the build artifact (weakref.node) itself
rather than the directory it's built in. Depending on the directory
means that a build failure won't trigger a rebuild on the next
invocation because the directory's timestamp has been updated.
If a client sends a lot more pipelined requests than we can handle, then
we need to provide backpressure so that the client knows to back off.
Do this by pausing both the stream and the parser itself when the
responses are not being read by the downstream client.
Backport of 085dd30
- fixed some incomprehensible wording ("event assigned to..."?)
- removed undocumented and unnecessary process properties from example
- corrected the docs on the default for the exec setting
- described when workers are removed from cluster.workers
- described addressType, which was documented as existing, but not what
values it might have
- spell out more clearly the limitations of setupMaster
- describe disconnect in sufficient detail that why a child does or does
not exit can be understood
- clarify which cluster functions and events are available on process or
just on the worker, as well as which are not available in children,
- don't describe events as the same, when they have receive different
arguments
- fix misleading disconnect example: since disconnect already calls
close on all servers, doing it again in the example is a no-op, not
the "force close" it was claimed to be
- document the error event, not catching it will kill your node
- describe suicide better, it is important, and a bit unintuitive
(process.exit() is not suicide?)
- use worker consistently throughout, instead of child.
- Make explicit that .disconnected is set before the disconnect event,
and it is not allowed to send messages after calling .disconnect(),
even while waiting for a delayed disconect event.
- Remove obsolete claim that explicit exit is required
- Describe silent: in the options for fork()
- Describe .connected as the property it is, not just as an aside in
the disconnect() method
A follow-up commit will save the domain name on the request object but
we can't call that property 'domain' because that gets intercepted by
src/node.cc and lib/domain.js to implement the node.js feature of the
same name.
To avoid confusion, rename all variables called 'domain' to 'hostname'.
Before this commit, the SIGUSR1 signal handler wasn't installed until
late in the bootstrapping process and we were prone to miss signals
sent by other processes.
This commit installs an early-boot signal handler that merely records
the fact that we received a signal. Once the debugger infrastructure
is in place, the signal is re-raised, kickstarting the debugger.
Among other things, this means that simple/test-debugger-client is
now _much_ less likely to fail.
Commit 30e5366b ("core: Use a uv_signal for debug listener") changed
SIGUSR1 handling from a signal handler to libuv's uv_signal_*()
functionality to fix a race condition (and possible hang) in the
signal handler.
While a good change in itself, it made it impossible to interrupt
long running scripts. When a script is stuck in a busy loop, control
never returns to the event loop, which in turn means the signal
callback - and therefore the debugger - is never invoked.
This commit changes SIGUSR1 handling back to a normal signal handler
but one that treads _very_ carefully.
If a client sends a lot more pipelined requests than we can handle, then
we need to provide backpressure so that the client knows to back off.
Do this by pausing both the stream and the parser itself when the
responses are not being read by the downstream client.
Fix GH-6214
Add a short explanation of what the load average is and why it's
unavailable on Windows.
Also sneak in a fix for a typo that I introduced in commit 56c5806.
Don't emit the 'disconnect' event until all workers have gone away.
Before this commit, the event was emitted when all open handles were
closed, which usually - but not always - amounts to the same thing.
Fixes#6346.
Because it's possible for the data within a Buffer instance to be
altered after instantiation, or in case a user attempts to do something
like the following:
Buffer.prototype.fill.call({}, 10, 0, 10);
It doesn't result in a segfault.
* Extend examples to show how to handle non-constructor invocation in
constructor callback functions.
* Fix up examples to initialize member variables at object construction.
* Fix up a few naming inconsistencies.
Fixes#5701.
Destroying the TLS session implies destroying the underlying socket but
before this commit, that was done with net.Socket#destroy() rather than
net.Socket#destroySoon(). The former closes the connection right away,
even when there is still data to write. In other words, sometimes the
final TLS record got truncated.
Fixes#6107.
This change makes several improvements to the ustack helper and MDB
support:
- ustack helper and MDB: add support for two-byte strings
(necessary to print many filenames in stacktraces in 0.10 and later).
- ustack helper: fix position numbers, which were off by a factor of two
- ustack helper: fix frames with undefined Scripts (e.g., "RegExp")
- ustack helper: add stub frames
- MDB: add support for sliced strings
- MDB: sync up with changes from the illumos version of the module
Fixes#6309Closes#6318
fs.truncate() and its synchronous sibling are implemented in terms of
open() + ftruncate(). Unfortunately, it opened the target file with
mode 'w' a.k.a. 'write-only and create or truncate at open'.
The subsequent call to ftruncate() then moved the end-of-file pointer
from zero to the requested offset with the net result of a file that's
neatly truncated at the right offset and filled with zero bytes only.
This bug was introduced in commit 168a5557 but in fairness, before that
commit fs.truncate() worked like fs.ftruncate() so it seems we've never
had a working fs.truncate() until now.
Fixes#6233.
Mea culpa, I didn't properly resolve a merge conflict in the last two
commits. The resulting segmentation fault only happened on Linux and
only sometimes.
Fixes#6306.
The previous commit changes the profiler idle notifier so that it only
gets started when a --prof or --prof_lazy argument is specified on the
command line.
This commit adds two internal methods to the process object that allows
one to start and stop the idle notifier programmatically.
The previous commit adds a notifier that tells the V8 profiler when
node.js is idle, i.e. when it's about to start sleeping in the
platform's equivalent of epoll_wait().
This commit adds a heuristic that only starts the notifier when the
V8 profiler is started from the command line.
Inform V8's CPU profiler when we're idle. The profiler is
sampling-based but not all samples are created equal; mark the wall
clock time spent in epoll_wait() and friends so profiling tools can
filter it out. The samples still end up in v8.log but with state=IDLE
rather than state=EXTERNAL.
I haven't actually tested this code, but was reading it due to a
post that linked to the code here:
http://dailyjs.com/2013/09/26/libuv/
As I was reading through the code, I noticed a path that can't
be reached.
I didn't strictly follow the contributing guide:
https://github.com/joyent/node/wiki/Contributing
but the change seems safe.
Feel free to close this out. I'm not sure if it was just an oversight
or what.
Drop the ObjectWrap dependency in favor of an internal WeakObject class.
Let's us stop worrying about API and ABI compatibility when making
changes to the way node.js deals with weakly persistent handles
internally.
After the upgrade from 3.20.17.7 to 3.20.17.11, we've begun hitting
random assertions in V8 in memory-constrained / GC-heavy situations.
The assertions all seem to be related to heap allocations and garbage
collection but apart from that, they're all over the place.
This reverts commit 970bdccc38.
The default entropy source is /dev/urandom on UNIX platforms, which is
okay but we can do better by seeding it from OpenSSL's entropy pool.
On Windows we can certainly do better; on that platform, V8 seeds the
random number generator using only the current system time.
Fixes#6250.
The test case from the previous commit exposed a regression in the way
that c-ares errors are reported to JS land. Said regression was
introduced in commit 756b622 ("src: add multi-context support").
Fixes the following test failure:
$ out/Release/node test/simple/test-dns-regress-6244
util.js:675
var errname = uv.errname(err);
^
Error: err >= 0
at Object.exports._errnoException (util.js:675:20)
at errnoException (dns.js:43:15)
at Object.onresolve [as oncomplete] (dns.js:145:19)
lib/dns.js erroneously assumed that the error code was a libuv error
code when it's really a c-ares status code. Libuv handles getaddrinfo()
style lookups (which is by far the most common type of lookup), that's
why this bug wasn't discovered earlier.
Don't forget to initialize the c-ares task tree head when creating a
new Environment. Oversight from the multi-context work that landed
in commit 756b622.
Fixes#6244.
Fix "Assertion failed" when trying to connect to non-int ports:
Assertion failed: (args[2]->Uint32Value()), function Connect,
file ../src/tcp_wrap.cc, line 379.
Abort trap: 6
Apparently, context->Global() won't be destroyed if the context itself
isn't marked as weak and independent.
Also, the weakness flag should be cleared once the weak callback is
executed, otherwise we'll get crashes in Debug builds.
fix#6115 and #6201
The `options` that were being passed in before here are specific to a
single request, which kinda defeats the purpose of using an Agent in the
first place.
On a worse note, these `options` have not yet been "processed" by the
`http.ClientRequest` class, so if `port: null` is set (like it is as the
result of a `url.parse()` call), then they take preference over the
processed values since the agent's "options" get mixed in last in the
`createSocket()` function.
Fixes#6197.
Fixes#6199.
Closes#6231.
Otherwise the data ends up "on the wire" twice, and
switching between consuming the stream using `ondata`
vs. `read()` would yield duplicate data, which was bad.
Apparently Joyent decommissioned joyeur.com but at least they saved the
contents of the blog. Update the links in the README and the nodejs.org
blog posts.
Hat tip to Eugen Pirogoff (@eugenpirogoff) for pointing it out.
Fixes#6224.
Functions created using: `vm.runInNewContext('(function() { })')` will
reference only `proxy_global_` object and not `sandbox_`. Thus in case,
where there're no references to sandbox (such as in example above),
`ContextifyContext` will be destroyed and use-after-free might happen.
String#toLowerCase() is incredibly slow and was costing a 15-30%
performance hit for Buffers less than 1KB. Now instead it'll attempt to
find the correct encoding directly from the passed encoding, only then
afterwards it'll lowercase.
The optimization for not passing any encoding at all is still at the top
of the method.
At most this may add 10% performance hit for passing a mixed case
encoding.
The NPN protocols was set on `require('tls')` or `global` object instead
of being a local property. This fact lead to strange persistence of NPN
protocols, and sometimes incorrect protocol selection (when no NPN
protocols were passed in client options).
fix#6168
Slowness being somewhat subjective but determined by running the
test suite a few times and picking off everything that consistently
clocks in at 2 seconds or more.
Honorable mention for simple/test-tls-server-large-request, it often
runs for 10 (!) seconds or more.
Since it is Unix tradition to use exit code 1 for general-purpose script
bail-out, and the way of doing that in Node is to throw an exception and
not catch it, it makes the most sense to exit with 1 when an exception
goes uncaught.
Move the `Invalid Argument` exit to 9, so that it's something specific,
and clear that it's a node internal error.
Also, document the exit codes that we use.
Fix pointer unwrapping when T is a class with more than one base class.
Before this commit, the wrapped void* pointer was cast directly to T*
without going through ObjectWrap* first, possibly leading to a class
instance pointer that points to the wrong vtable.
This change required some cleanup in various files; some classes
used private rather than public inheritance, others didn't derive
from ObjectWrap at all...
Fixes#6188.
This commit makes it possible to use multiple V8 execution contexts
within a single event loop. Put another way, handle and request wrap
objects now "remember" the context they belong to and switch back to
that context when the time comes to call into JS land.
This could have been done in a quick and hacky way by calling
v8::Object::GetCreationContext() on the wrap object right before
making a callback but that leaves a fairly wide margin for bugs.
Instead, we make the context explicit through a new Environment class
that encapsulates everything (or almost everything) that belongs to
the context. Variables that used to be a static or a global are now
members of the aforementioned class. An additional benefit is that
this approach should make it relatively straightforward to add full
isolate support in due course.
There is no JavaScript API yet but that will be added in the near
future.
This work was graciously sponsored by GitHub, Inc.
From commit 756ae2c all the WRAP/UNWRAP were moved to a single location
for ease of use. In a single location NO_ABORT should have been used but
wasn't. This caused HandleWrap::Close to abort. Below is the applicable
code change as demonstration there was no abort specified when
unwrapping the object.
void HandleWrap::Close(const FunctionCallbackInfo<Value>& args) {
HandleScope scope(node_isolate);
- HandleWrap *wrap = static_cast<HandleWrap*>(
- args.This()->GetAlignedPointerFromInternalField(0));
+ HandleWrap* wrap;
+ UNWRAP(args.This(), HandleWrap, wrap);
Also included a test that will reproduce the abort.
Stop gcc from getting confused, explicitly cast the return value from
getuid() and getgid() to uint32_t. Fixes the following build error:
../src/node.cc: In function 'void node::GetUid(const
v8::FunctionCallbackInfo<v8::Value>&)':
../src/node.cc:1552:37: error: call of overloaded 'Set(uid_t)' is
ambiguous
../src/node.cc:1552:37: note: candidates are:
../deps/v8/include/v8.h:5939:6: note: void
v8::ReturnValue<T>::Set(bool) [with T = v8::Value]
../deps/v8/include/v8.h:5909:6: note: void
v8::ReturnValue<T>::Set(double) [with T = v8::Value]
../deps/v8/include/v8.h:5915:6: note: void
v8::ReturnValue<T>::Set(int32_t) [with T = v8::Value, int32_t = int]
../deps/v8/include/v8.h:5926:6: note: void
v8::ReturnValue<T>::Set(uint32_t) [with T = v8::Value, uint32_t =
unsigned int]
Fixes#6182.
In cases where the Agent has maxSockets=Infinity, and
keepAlive=false, there's no case where we won't immediately close the
connection after the response is completed.
Since we're going to close it anyway, send a `connection:close` header
rather than a `connection:keep-alive` header. Still send the
`connection:keep-alive` if the agent will actually reuse the socket,
however.
Closes#5838
This simplifies the logic that was in isSyntaxError, as well as the
choice to wrap command input in parens to coerce to an expression
statement.
1. Rather than a growing blacklist of allowed-to-throw syntax errors,
just sniff for the one we really care about ("Unexpected end of input")
and let all the others pass through.
2. Wrapping {a:1} in parens makes sense, because blocks and line labels
are silly and confusing and should not be in JavaScript at all.
However, wrapping functions and other types of programs in parens is
weird and required yet *more* hacking to work around. By only wrapping
statements that start with { and end with }, we can handle the confusing
use-case, without having to then do extra work for functions and other
cases.
This also fixes the repl wart where `console.log)(` works in the repl,
but only by virtue of the fact that it's wrapped in parens first, as
well as potential side effects of double-running the commands, such as:
> x = 1
1
> eval('x++; throw new SyntaxError("e")')
... ^C
> x
3
Adding a new `repl-harmony` test file here because adding the
`--use_strict --harmony` flags on the main repl test file was causing
lots of unrelated failures, due to global variable assignments and
things like that. This new test file is based off of the original
repl.js test file, but has a lot of the tests stripped out. A test case
for this commit is included though.
Fixes#6132.
Replace the growing list of 'isSyntaxError' whackamole conditions with a
smarter approach. This creates a vm Script object *first*, which will
parse the code and raise a SyntaxError right away.
We still do need the test function, but only because strict mode syntax
errors are not recoverable, and should be raised right away. Really, we
should probably *only* continue on "unexpected end of input" SyntaxErrors.
Also fixes a very difficult-to-test nit where the '...' indentation is
not properly cleared when you ^C out of a syntax error.
Closes#6093
This commit changes src/tcp_wrap.cc and src/udp_wrap.cc just enough to
get by (i.e. to compile and function correctly.)
The new libuv API allows for more cleanup and deduplication but I'm
saving that for another day.
If the string is external then the length can be quickly retrieved. This
is especially faster for large strings that are being treated as UTF8.
Also, if the string is external then there's no need for a full
String::WriteUtf8 operation. A simple memcpy will do.
This is useful when we need to push some debugging messages out to
stderr, without going through the Writable class, or triggering any kind
of nextTick or callback behavior.
* Exit with an error message when the option is not a node or V8 option.
* Remove the option_end_index global. Needs to happen anyway for
the multi-context work, might as well land it in master now.
* Add a smidgen of const-correctness.
* Pay off a few years of accrued technical debt.
Don't wait a full second before starting the watcher, 10 ms ought to be
more than enough time. Reduces running time from 1250 ms to 250 ms on
my system.
Don't call uv_loop_delete() until we've figured out a way to gracefully
close open handles. See also commit 4915884 and its subsequent revert
in commit 980cbd5.
This reverts commit 556b890ad9.
This change is not entirely ready for prime time: it's making ~50 tests
fail on Windows, mostly due to timeouts. It's up for debate who is
at fault here: node.js or libuv.
It does however expose a libuv bug on OS X, where the event loop
sometimes gets stuck in uv__io_poll() when there is a single
UV_SHUTDOWN request left in the queue. Needs further investigation.
This reverts commit 4915884da6.
Commit 556b890 added a call to uv_loop_delete() with the intent of
catching handle lifecycle bugs. It worked because it exposed one:
process.on('exit', function() {
console.log('bye'); // Asserts.
});
When run, it asserts with the following message:
Assertion failed: (!uv__has_active_reqs(loop)), function
uv__loop_delete, file ../deps/uv/src/unix/loop.c, line 150.
That's because libuv as of joyent/libuv@3f2d4d5 checks that there are
no in-flight requests when the event loop is destroyed. In the test
case above, the write request for the string hasn't completed yet by
the time node.js exits: the string itself has most likely been written
but libuv hasn't had the opportunity to return the write request to
node.js.
That's why this commit adds a cleanup step right before exit where it
explicitly closes all open handles, then waits until the event loop
exits naturally.
Named pipes (UNIX domain sockets) are shut down first in order to flush
pending write requests. Should go some way towards fixing the Windows
issue where output on stdout/stderr sometimes gets truncated.
Fixesjoyent/libuv#911.
Remove NodeBIO::GetMethod() and replace calls to BIO_new() with calls
to the new NodeBIO::New() function.
This commit basically reshuffles some code in order to make it explicit
that the NodeBIO BIO_METHOD is const.
Before this commit it was declared static (in a header file!), meaning
it got duplicated in every file that includes it.
A few duplicated pointers is not the end of the world but it introduces
a lot of potential for confusion because root_cert_store in file A is
not the root_cert_store in file B.
Moral of the story: don't declare static variables in header files.
- The caveats no longer apply.
- Document options arguments, including `displayErrors` and the
different things it means in each place.
- Re-did examples to be more on point, e.g. `runInContext` example
runs multiple scripts in the same context.
- Documented how `vm.createContext`s meaning has substantially changed,
and is now more of a "contextifier" than a "creator."
- Reordered vm functions to be readable in order; the concept of
contextifying needs to come before `runInContext` and
`runInNewContext`.
- Documented new `vm.isContext`.
- Documented the `vm.Script` constructor, instead of `createScript`,
since factory methods are silly and we wanted to document the class's
methods anyway.
- Documented `script.runInContext`.
- Change stability to stable, if I may be so bold.
Passing a filename is still supported in place of certain options
arguments, for backward-compatibility, but timeout and display-errors
are not translated since those were undocumented.
Also managed to eliminate an extra stack trace line by not calling
through the `createScript` export.
Added a few message tests to show how `displayErrors` works.
In `Timer.now` always update the loop time by calling uv_update_time.
Previously we were trying to cache the loop time to prevent extra
syscalls. While a noble goal, it can cause timers to fire early in
certain circumstances. Especially seen in cpu bound work loads or work
loads with synchronous file operations.
Previously, calling `vm.createContext(o)` repeatedly on the same `o`
would cause new C++ `ContextifyContext`s to be created and stored on
`o`, while the previous resident went off into leaked-memory limbo.
Now, repeatedly trying to contextify a sandbox will do nothing after
the first time.
To detect this, an independently-useful `vm.isContext(sandbox)` export
was added.
This was a remnant of the original Contextify code, wherein
ContextifyContext was a user-exposed object. In vm, it is not, so all
of the ObjectWrap and function-template stuff for the ContextifyContext
constructor is now unnecessary.
There's no need to create a new Buffer instance if we're just going to
immediately call toString() at the end anyway. Better to create a
string up front, and setEncoding() on the streams, and do a string
concatenation instead.
Since the encoding is no longer relevant once it is decoded to a Buffer,
it is confusing and incorrect to pass the encoding as 'utf8' or whatever
in those cases.
Closes#6119
Length arguments passed to SlowBuffer were coerced to Int32, not Uint32,
so passing a negative number would throw the following:
node: ../src/smalloc.cc:244: void node::smalloc::Alloc(): Assertion `length <= kMaxLength' failed.
Aborted (core dumped)
That has been fixed by coercing to Uint32 and comparing the value
against kMaxLength.
Due to a lot of the util.is* checks there was much unnecessary overhead
for the most common use case of Buffer. Which is creating a new Buffer
instance for data from incoming I/O. NativeBuffer is a simple way to
bypass all the unneeded checks and simply hand back a Buffer instance
while setting the length.
On windows process exit codes can be greater than INT32_MAX. This used
to be not much of a problem - greater values would just come out
negative. However since ca9eb71 a negative result value indicates that
uv_spawn() has failed, so this is no longer acceptable.
Instead of doing all the domain handling in core, allow the domain to
set an error handler that'll take care of it all. This way the domain
error handling can be abstracted enough for any user to use it.
All the Buffer#{ascii,hex,etc.}Slice() methods are intentionally strict
to alert if a Buffer instance was attempting to be accessed out of
bounds. Buffer#toString() is the more user friendly way of accessing the
data, and will coerce values to their min/max on overflow.
This is an important part of the repl use-case.
TODO: The arg parsing in vm.runIn*Context() is rather wonky.
It would be good to move more of that into the Script class,
and/or an options object.
As documented in #3042 and in [1], the existing vm implementation has
many problems. All of these are solved by @brianmcd's [contextify][2]
package. This commit uses contextify as a conceptual base and its code
core to overhaul the vm module and fix its many edge cases and caveats.
Functionally, this fixes#3042. In particular:
- A context is now indistinguishable from the object it is based on
(the "sandbox"). A context is simply a sandbox that has been marked
by the vm module, via `vm.createContext`, with special internal
information that allows scripts to be run inside of it.
- Consequently, items added to the context from anywhere are
immediately visible to all code that can access that context, both
inside and outside the virtual machine.
This commit also smooths over the API very slightly:
- Parameter defaults are now uniformly triggered via `undefined`, per
ES6 semantics and previous discussion at [3].
- Several undocumented and problematic features have been removed, e.g.
the conflation of `vm.Script` with `vm` itself, and the fact that
`Script` instances also had all static `vm` methods. The API is now
exactly as documented (although arguably the existence of the
`vm.Script` export is not yet documented, just the `Script` class
itself).
In terms of implementation, this replaces node_script.cc with
node_contextify.cc, which is derived originally from [4] (see [5]) but
has since undergone extensive modifications and iterations to expose
the most useful C++ API and use the coding conventions and utilities of
Node core.
The bindings exposed by `process.binding('contextify')`
(node_contextify.cc) replace those formerly exposed by
`process.binding('evals')` (node_script.cc). They are:
- ContextifyScript(code, [filename]), with methods:
- runInThisContext()
- runInContext(sandbox, [timeout])
- makeContext(sandbox)
From this, the vm.js file builds the entire documented vm module API.
node.js and module.js were modified to use this new native binding, or
the vm module itself where possible. This introduces an extra line or
two into the stack traces of module compilation (and thus into most
stack traces), explaining the changed tests.
The tests were also updated slightly, with all vm-related simple tests
consolidated as test/simple/test-vm-* (some of them were formerly
test/simple/test-script-*). At the same time they switched from
`common.debug` to `console.error` and were updated to use
`assert.throws` instead of rolling their own error-testing methods.
New tests were also added, of course, demonstrating the new
capabilities and fixes.
[1]: http://nodejs.org/docs/v0.10.16/api/vm.html#vm_caveats
[2]: https://github.com/brianmcd/contextify
[3]: https://github.com/joyent/node/issues/5323#issuecomment-20250726
[4]: bf123f3ef9/src/contextify.cc
[5]: https://gist.github.com/domenic/6068120
* uv: Upgrade v0.10.14
* http_parser: Do not accept PUN/GEM methods as PUT/GET (Chris Dickinson)
* tls: fix assertion when ssl is destroyed at read (Fedor Indutny)
* stream: Throw on 'error' if listeners removed (isaacs)
* dgram: fix assertion on bad send() arguments (Ben Noordhuis)
* readline: pause stdin before turning off terminal raw mode (Daniel Chatfield)
`maybeInitFinished()` can emit the 'secure' event which
in turn destroys the connection in case of authentication
failure and sets `this.pair.ssl` to `null`.
If such condition appeared after non-empty read - loop will continue
and `clearOut` will be called on `null` object instead of
`crypto::Connection` instance. Resulting in the following assertion:
ERROR: Error: Hostname/IP doesn't match certificate's altnames
Assertion failed: handle->InternalFieldCount() > 0
fix#5756
The C++ API has been changed so the passed length is the byte size of
the data, not the length of the array.
This was done so users need to explicitly define how much memory they
want allocated.
`dns.lookup` defaults to selecting IPv4 record even if IPv6 is available
for the desired zone. Generally, this approach works, but if IPv4
address is unavailable - there'll be no other way to opt-out and connect using
IPv6 address than calling `dns.lookup` and passing it to `.connect()`
directly.
This commit adds `family` option to `net.connect` method to figure out
this issue.
It only fails once in about 1000 times, but that's too many.
It's timing dependent, and the main behavior is covered by the other
assertions in the test anyway.
This change is 100% backwards compatible.
This change will make using `EventEmitter` slightly simpler / nicer and
adheres to the best practice set forth by substack.
```js
var EventEmitter = require("events")
var emitter = new EventEmitter()
```
The only difference is that we now have to set `EventEmitter` as a
property of `EventEmitter` for backwards compatibility like we do with
[`Stream`][1]
We have also set the `usingDomains` property on the `EventEmitter`
constructor itself because that aligns with it's current usage of
`require("events").usingDomains = true`
There are other internals that would benefit from this change as well
like `StringDecoder`
This allows automatically-inserted headers to be removed permanently by
calling OutgoingMessage.removeHeader() on them, as if they were normal
headers.
In this situation:
writable.on('error', handler);
readable.pipe(writable);
writable.removeListener('error', handler);
writable.emit('error', new Error('boom'));
there is actually no error handler, but it doesn't throw, because of the
fix for stream.once('error', handler), in 23d92ec.
Note that simply reverting that change is not valid either, because
otherwise this will emit twice, being handled the first time, and then
throwing the second:
writable.once('error', handler);
readable.pipe(writable);
writable.emit('error', new Error('boom'));
Fix this with a horrible hack to make the stream pipe onerror handler
added before any other userland handlers, so that our handler is not
affected by adding or removing any userland handlers.
Closes#6007.
Commit 03e008d introduced src/tls_wrap.cc and src/tls_wrap.h but
said files copied on the order of 1 kLoC from src/node_crypto.cc
and src/node_crypto.h. This commit undoes some of the duplication.
Fixes#6024.
Add range checks for the offset, length and port arguments to
dgram.Socket#send(). Fixes the following assertion:
node: ../../src/udp_wrap.cc:264: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`offset < Buffer::Length(buffer_obj)' failed.
And:
node: ../../src/udp_wrap.cc:265: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`length <= Buffer::Length(buffer_obj) - offset' failed.
Interestingly enough, a negative port number was accepted until now but
silently ignored. (In other words, it would send the datagram to a
random port.)
This commit exposed a bug in the simple/test-dgram-close test which
has also been fixed.
This is a back-port of commit 41ec6d0 from the master branch.
Fixes#6025.
On windows, libuv will immediately make a `ReadConsole` call (in the
thread pool) when a 'flowing' `uv_tty_t` handle is switched to
line-buffered mode. That causes an immediate issue for some users,
since libuv can't cancel the `ReadConsole` operation on Windows 8 /
Server 2012 and up if the program switches back to raw mode later.
But even if this will be fixed in libuv at some point, it's better to
avoid the overhead of starting work in the thread pool and immediately
cancelling it afther that.
See also f34f1e3, where the same change is made for the opposite
flow, e.g. move `resume()` after `_setRawMode(true)`.
Fixes#5927
This is a backport of dfb0461 (see #5930) to the v0.10 branch.
On windows, libuv will immediately make a `ReadConsole` call (in the
thread pool) when a 'flowing' `uv_tty_t` handle is switched to
line-buffered mode. That causes an immediate issue for some users,
since libuv can't cancel the `ReadConsole` operation on Windows 8 /
Server 2012 and up if the program switches back to raw mode later.
But even if this will be fixed in libuv at some point, it's better to
avoid the overhead of starting work in the thread pool and immediately
cancelling it afther that.
See also f34f1e3, where the same change is made for the opposite
flow, e.g. move `resume()` after `_setRawMode(true)`.
Fixes#5927Closes#5930
RandomBytes() allocated memory with new[] which was then handed off to
Buffer::Use() which eventually releases it again with free().
Mixing the two is technically a violation of the spec and besides, it's
generally frowned upon.
In other Writable streams, the 'finish' event means that all of the data
was written, and flushed to the underlying system.
The 'prefinish' event means that end() was called, and all of the data
was processed, but not necessarily completely flushed.
This change brings the http OutgoingMessage classes more in sync with
the other Writable classes throughout Node.
Unfortunately, this change highlights an issue with http
IncomingMessages, where the _dump() method will not actually pull the
data off the wire. This is a minor issue that is typically only
relevant in test cases, and will be addressed in the next commit.
This removes a dubious performance "optimization" where strings body
chunks were concatenated to one another (and to the headers) without any
regard for their encoding.
Achieve a minor speed-up by looking up the timeout callback on the timer
object by using an array index rather than a named property.
Gives a performance boost of about 1% on the misc/timers benchmarks.
Code cleanup: don't call a Connection object `p` in some places, `c` in
other places and `ss` in yet other places. Let's just call it `conn`.
This also fixes about a million style errors in one fell swoop.
Don't create an Integer when setting a numeric index on an object or an
array, use the version of v8::Object::Set() that takes an uint32_t.
Change the types of the variables from int to uint32_t and clean up
some code consistency issues while we're here.
Don't set the oncomplete property in src/cares_wrap.cc, we can do it
just as easily in lib/dns.js.
Switch two closures to the 'function with _this_ object' model. Makes
it impossible for an overzealous closure to capture too much context
and accidentally hold on to too much memory.
* The test calls an internal API that changed in commit ca9eb71.
* Trying to reverse-lookup a bogus hostname now returns EINVAL rather
than the (bogus!) status code ENOTIMP.
Use v8::Integer::NewFromUnsigned() when updating the writeQueueSize
field.
Before this commit, it used v8::Integer::New() but that takes an
int32_t. It's unlikely for a write queue to grow beyond 2**31-1 bytes
but let's use the unsigned integer constructor anyway, just in case.
This is [1] applied ahead of time. Summary:
OpenBSD doesn't have <ucontext.h>. ucontext_t lives in <signal.h>
and is a typedef for struct sigcontext. There is no uc_mcontext.
[1] https://codereview.chromium.org/21705003/
Note: the patch has been accepted upstream but hasn't made its way into
a stable release yet.
No one in this day and age should be using SSLv2 so disable it by
default. You can re-enable it with `./configure --with-sslv2` but
there really should be no reason for that.
Alphabetical order should make it easier to find the switches you need
because we've got quite a lot of them now.
Keep --prefix at the top because that's arguably the one people will be
looking for most.
Don't run configure when the configure script has been touched. Doing so
would be okay if the Makefile passed the original arguments to configure
but it doesn't - it runs configure without any arguments, effectively
destroying the current configuration.
Remove this misfeature and instead print an error message telling the
user to (re-)run configure.
Change process.domain to use a getter/setter and access that property
via an array index. These are much faster to get from c++, and it can be
passed to _setupDomainUse and stored as a Persistent<Array>.
InDomain() and GetDomain() as trivial ways to access the domain
information in the native layer. Important because we'll be able to
quickly access if a domain is active. Instead of just whether the domain
module has been loaded.
Don't use v8::Object::SetHiddenValue() to keep a reference alive to the
buffer, we can just as easily do that from JS land and it's a lot faster
to boot.
Because the buffer is now a visible property of the write request
object, it's essential that we do *not* log it - we'd be effectively
serializing the whole buffer to a pretty-printed string.
v0.10 allows strings for the offset, length and port arguments to
dgram.send() and dgram.sendto() but master before this commit would
abort with the following assert:
node: ../../src/udp_wrap.cc:227: static void
node::UDPWrap::DoSend(const v8::FunctionCallbackInfo<v8::Value>&,
int): Assertion `args[2]->IsUint32()' failed.
Go beyond what v0.10 does and also add range checks: offset and length
should be >= 0, port should be between 1 and 65535.
That particular change needs to be back-ported to v0.10 because passing
a negative offset or length number aborts with the following assertions:
node: ../../src/udp_wrap.cc:264: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`offset < Buffer::Length(buffer_obj)' failed.
Or:
node: ../../src/udp_wrap.cc:265: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`length <= Buffer::Length(buffer_obj) - offset' failed.
Interestingly enough, a negative port number is accepted in v0.10 but
is silently ignored.
This commit exposed a bug in the simple/test-dgram-close test which
has also been fixed.
* Change calls to String::New() and String::NewSymbol() to their
respective one-byte, two-byte and UTF-8 counterparts.
* Add a FIXED_ONE_BYTE_STRING macro that takes a string literal and
turns it into a v8::Local<v8::String>.
* Add helper functions that make v8::String::NewFromOneByte() easier to
work with. Said function expects a `const uint8_t*` but almost every
call site deals with `const char*` or `const unsigned char*`. Helps
us avoid doing reinterpret_casts all over the place.
* Code that handles file system paths keeps using UTF-8 for backwards
compatibility reasons. At least now the use of UTF-8 is explicit.
* Remove v8::String::NewSymbol() entirely. Almost all call sites were
effectively minor de-optimizations. If you create a string only once,
there is no point in making it a symbol. If you are create the same
string repeatedly, it should probably be cached in a persistent
handle.
When a stream is flowing, and not in the middle of a sync read, and
the read buffer currently has a length of 0, we can just emit a 'data'
event rather than push it onto the array, emit 'readable', and then
automatically call read().
As it happens, this is quite a frequent occurrence! Making this change
brings the HTTP benchmarks back into a good place after the removal of
the .ondata/.onend socket kludge methods.
smalloc.alloc now accepts an optional third argument which allows
specifying the type of array that should be allocated. All available
types are now located on smalloc.Types.
* Moved the ToObject check out of smalloc::Alloc and into JS. Direct
usage of that method is for internal use only and so can bypass the
possible coercion.
* Same has been done with smalloc::SliceOnto.
* smalloc::CopyOnto will now throw if passed argument is not an object.
* Remove extra TargetFreeCallback function. There was a use for it when
it was working with a Local<T>, but that code has been removed making
the function superfluous.
There are some agent subclasses using this today.
Despite the addRequest function being undocumented internal API, it's
easy enough to just support the old signature for backwards
compatibility.
Add is_named_pipe(), is_named_pipe_ipc() and is_tcp() and update the
code base to use those rather than `stream->type == UV_FOO` and
`reinterpret_cast<uv_pipe_t*>(handle)->ipc` style checks.
Hide member fields behind getters. Make the fields themselves const
in the sense that the pointer is non-assignable - the pointed to object
remains mutable.
Makes reasoning about lifecycle and mutability a little easier.
`server.SNICallback` was initialized with `SNICallback.bind(this)`, and
therefore check `this.SNICallback === SNICallback` was always false, and
`_tls_wrap.js` always thought that it was a custom callback instead of
default one. Which in turn was causing clienthello parser to be enabled
regardless of presence of SNI contexts.
Don't create a superfluous Number object, just use the version of
v8::Object::Get() that takes an unsigned int. Convert the index to
unsigned int while we're here.
If an error listener is added to a stream using once() before it is
piped, it is invoked and removed during pipe() but before pipe() sees it
which causes it to be emitted again.
Fixes#4155#4978
The type of the expression `(uint16_t) server_names_len + 2` gets
implicitly widened to int. Change the type of server_names_len to
uint32_t to avoid the following warnings:
../../src/node_crypto_clienthello.cc:144: warning: comparison
between signed and unsigned integer expressions
../../src/node_crypto_clienthello.cc:146: warning: comparison
between signed and unsigned integer expressions
Quoting the CVE:
Google V8, as used in Google Chrome before 28.0.1500.95, allows
remote attackers to cause a denial of service or possibly have
unspecified other impact via vectors that leverage "type confusion."
Likely has zero impact on node.js because it only runs local, trusted
code but let's apply it anyway.
This is a back-port of upstream commit r15665. Original commit log:
Use internal array as API function cache.
R=yangguo@chromium.org
BUG=chromium:260106
TEST=cctest/test-api/Regress260106
Review URL: https://codereview.chromium.org/19159003Fixes#5973.
Flags and modes aren't the same, symlinks are followed in all of the
path but the last component, docs should say something about what the
mode argument is for and when its used, fs.openSync should point to the
function that contains the docs for its args, as fs.writeSync does.
This is [1] applied ahead of time. Summary:
OpenBSD doesn't have <ucontext.h>. ucontext_t lives in <signal.h>
and is a typedef for struct sigcontext. There is no uc_mcontext.
[1] https://codereview.chromium.org/21705003/
It shouldn't ignore it!
There're two possibile cases, which should be handled properly:
1. Having a default `SNICallback` which is using contexts, added with
`server.addContext(...)` routine
2. Having a custom `SNICallback`.
In first case we may want to opt-out setting `.onsniselect` method (and
thus save some CPU time), if there're no contexts added. But, if custom
`SNICallback` is used, `.onsniselect` should always be set, because
server contexts don't affect it.
Update a few more `Local<T>::New(isolate, persistent)` call sites to
`PersistentToLocal(isolate, persistent)` - the latter has a fast path
for non-weak persistent references.
When doing `FreeEmpty`, `NodeBIO` skips pre-allocated `head_` buffer.
However this might lead to double-freeing buffers since in `~NodeBIO()`
we're starting deallocation from `head_` buffer.
Commit 78d9094 updated src/*.cc to use the version of PersistentToLocal
that takes a v8::Isolate* as its first argument. This commit removes
the non-isolate version.
* Numeric values passed to alloc were converted to int32, not uint32
before the range check, which allows wrap around on ToUint32. This
would cause massive malloc calls and v8 fatal errors.
* dispose would not check if value was an Object, causing segfault if a
Primitive was passed.
* kMaxLength was not enumerable.
Build breakage accidentally introduced in 8e29ce9 during code cleanup.
HAVE_OPENSSL is always defined (as either 0 or 1) so use #if rather
than #ifdef.
Fixes#5979.
Run the garbage collector before running the actual test. It doesn't
matter now but if in the future something in node.js core creates a lot
of reclaimable garbage, that will break the test's expectation.
* Run the garbage collector before creating the big array. It doesn't
matter now but if in the future something in node.js core creates
a lot of reclaimable garbage, that will break the test's expectation.
* The first RSS check was being done too late. The garbage collector
might have run before the check, throwing off the 'reclaimed memory'
calculation.
* Due to changes in how V8 represents the big array internally, the
actual memory usage is just below 256 MB on x64. Update the test's
expectation.
Before this commit, events were set to undefined rather than deleted
from the EventEmitter's backing dictionary for performance reasons:
`delete obj.key` causes a transition of the dictionary's hidden class
and that can be costly.
Unfortunately, that introduces a memory leak when many events are added
and then removed again. The strings containing the event names are never
reclaimed by the garbage collector because they remain part of the
dictionary.
That's why this commit makes EventEmitter delete events again. This
effectively reverts commit 0397223.
Fixes#5970.
Change the build/include_order rule to match our preference:
project headers before system headers.
The rationale is that system headers before project headers makes it
easy to slip in bugs where a project header that requires a definition
from a system header, forgets to include the system header but still
compiles because the source files that include the project header
coincidentally include the system header too.
A good example is the size_t type. A project header file that needs the
definition of size_t should include stddef.h but forgetting to do so
will probably go unnoticed for a long time because almost every other
system header includes stddef.h (either directly or indirectly) and
almost every source file includes one or more system headers.
Ergo, project headers before system headers. It's a good thing.
To prevent all unnecessary calls to JS from MakeCallback, the remaining
two immediate return variables inTick and lastThrew have been added to
infoBox. Now MakeCallback should never need to call into JS unless it
absolutely has to.
Also removed Tock. Performance tests showed it was at least as fast or
faster than using a normal object, and this is more readable.
Avoid a costly buffer-to-string operation. Instead, allocate a new
buffer, copy the chunk header and data into it and send that.
The speed difference is negligible on small payloads but it really
shines with larger (10+ kB) chunks. benchmark/http/end-vs-write-end
with 64 kB chunks gives 45-50% higher throughput. With 1 MB chunks,
the difference is a staggering 590%.
Of course, YMMV will vary with real workloads and networks but this
commit should have a positive impact on CPU and memory consumption.
Big kudos to Wyatt Preul (@wpreul) for reporting the issue and providing
the initial patch.
Fixes#5941 and #5944.
Use the StringBytes::IsValidString() function introduced in commit
dce26cc to ensure that the input string meets the expectations of the
other StringBytes functions before processing it further.
Fixes the following assertion:
Assertion failed: (str->Length() % 2 == 0 && "invalid hex string
length"), function StorageSize, file ../../src/string_bytes.cc,
line 301.
Fixes#5725.
Performs a quick, non-exhaustive check on the input string to see if
it's compatible with the specified string encoding.
Curently it only checks that hex strings have a length that is a
multiple of two.
Don't throw an exception when the argument to %j is an object that
contains circular references, it's not helpful. Catch the exception
and return the string '[Circular]'.
Prior, strings would first be converted to a Buffer before being written
to disk. Now the intermediary step has been removed.
Other changes of note:
* Class member "must_free" was added to req_wrap so to track if the
memory needs to be manually cleaned up after use.
* External String Resource support, so the memory will be used directly
instead of copying out the data.
* Docs have been updated to reflect that if position is not a number
then it will assume null. Previously it specified the argument must be
null, but that was not how the code worked. An attempt was made to
only support == null, but there were too many tests that assumed !=
number would be enough.
* Docs update show some of the write/writeSync arguments are optional.
* Use ARRAY_SIZE() rather than scanning until we hit a NULL entry.
* Fix `-fsigned-char -Wnarrowing` compiler warnings. Harmless but
numerous and annoying.
* Static-ify the modp_group and mod_groups arrays.
* Const-ify the modp_groups array.
It imports the definition into every source file that includes
string_bytes.h, as evidenced by the build suddenly breaking left
and right because of missing Handle/Local/String/Value imports.
Passing the number of sent bytes to the callback is superfluous;
datagram sockets operate in atomic mode: either the sendmsg() system
call succeeds or it fails but it never does partial writes.
Instead, report send errors to the callback. UDP error reporting is
fairly haphazard on most platforms. You should not expect reliable
delivery of anything besides EMSGSIZE and (possibly) ENETDOWN and
ENETUNREACH.
Fixes#2608.
V8 3.20.9 enforces that external pointers are aligned on a two-byte
boundary.
We cannot portably guarantee that for the source code strings that
tools/js2c.py generates so simply stop using String::NewExternal()
altogether (and by extension String::ExternalAsciiStringResource).
Fixes the following run-time assert:
FATAL ERROR: v8::String::NewExternal() Pointer is not aligned
This prevents the following sort of thing from being confusing:
```javascript
stream.on('data', function() { console.error('got data'); });
stream.pause(); // stop reading
// turns out no data is available
stream.push(null);
// Hand the stream to someone else, who does stuff...
setTimeout(function() {
// too late! 'end' is already emitted!
stream.on('end', function() { console.error('got end'); });
});
```
With this change, the `end` event is not emitted until you call `read()`
*past* the EOF null. So, a paused stream will not swallow the `end`
event and emit it before you `resume()` the stream.
The title shouldn't be too long; libuv's uv_set_process_title() out of
security considerations no longer overwrites envp, only argv, so the
maximum title length is possibly quite short.
Fixes#5908.
And process.getgid() too.
Commit ed80638 changed fs.chown() and fs.fchown() to only accept
unsigned integers. Make process.getuid() and process.getgid() follow
suit.
This commit should unbreak npm on OS X - it's hitting the new 'uid must
be an unsigned int' check when installing as e.g. user 'nobody' (which
has an UID of -2 in /etc/passwd or 4294967294 when cast to an uid_t.)
Fixes#5904.
* uv: Upgrade to v0.10.13
* npm: Upgrade to v1.3.5
* os: Don't report negative times in cpu info (Ben Noordhuis)
* fs: Handle large UID and GID (Ben Noordhuis)
* url: Fix edge-case when protocol is non-lowercase (Shuan Wang)
* doc: Streams API Doc Rewrite (isaacs)
* node: call MakeDomainCallback in all domain cases (Trevor Norris)
* crypto: fix memory leak in LoadPKCS12 (Fedor Indutny)
If `obj` given to `cluster._getServer` has `_setServerData` or
`_getServerData` methods, the data will be synchronized across workers
and stored in master.
This incarnation of macros.py is only used to disable the (d)trace
macros. Rename it so it better reflects its purpose. A new macros.py
will be added in a follow-up commit.
Includes:
* No need for `typeof` when checking undefined.
* length is coerced to uint so no need to check if < 0.
* Stay consistent and always throw `new` errors.
* Returning offset + magic number in every write is error prone. Instead
return the central write function which returns the correct offset.
In a rush to implement the fix 35e0d60 I overlooked the logic that
causes 0-length buffer instantiation to automatically not assign the
parent regardless.
Before this commit, fs.chown() and fs.fchown() coerced the uid and gid
arguments to signed integers which is wrong because uid_t and gid_t are
unsigned on most all platforms and IDs that don't fit in a signed
integer do exist.
This commit changes the aforementioned functions to take unsigned ints
instead. No test because we can't assume the system has [GU]IDs that
large.
This change depends on joyent/libuv@d779eb5.
Fixes#5890.
SlowBuffer(0) passes NULL instead of doing malloc(0). So when someone
attempted to SlowBuffer(0).slice(0, 1) an assert would fail in
smalloc::SliceOnto.
It's important that the check go where it is because the resulting
Buffer needs to have external array data allocated. In the case a user
tries to slice a zero length Buffer it will also have NULL passed as the
data argument.
Also fixed where the .parent attribute was set for zero length Buffers.
There is no need to track the source of slice if the slice isn't
actually occurring.
Closes#5860
In streams2, there is an "old mode" for compatibility. Once switched
into this mode, there is no going back.
With this change, there is a "flowing mode" and a "paused mode". If you
add a data listener, then this will start the flow of data. However,
hitting the `pause()` method will switch *back* into a non-flowing mode,
where the `read()` method will pull data out.
Every time `read()` returns a data chunk, it also emits a `data` event.
In this way, a passive data listener can be added, and the stream passed
off to some other reader, for use with progress bars and the like.
There is no API change beyond this added flexibility.
Just forward declare struct sockaddr, the struct is never actually
dereferenced in src/node_internals.h.
Before this commit, it included sys/socket.h but that header doesn't
exist on Windows.
Libuv now returns errors directly. Make everything in src/ and lib/
follow suit.
The changes to lib/ are not strictly necessary but they remove the need
for the abominations that are process._errno and node::SetErrno().
Prep work for removing process._errno. The handle.getsockname() function
will return a status code in the future and set the address and port
properties on the object that's passed in from JS land.
Commit 636ca7c adds an optimization that casts strong Persistent<T>
handles directly to Local<T> handles to avoid the overhead of creating
new HandleScope-rooted Local<T> handles all the time.
One gotcha that I missed is that it's no longer legal to reference the
Local<T> after calling Persistent<T>::Dispose(). This commit addresses
that.
Helps catch bugs early on. Without it, V8 throws the fairly
unhelpful exception "TypeError: undefined is not a function" -
unhelpful because there is no stack trace.
It will be confusing if later on we add Buffer#dispose(), and smalloc is
its own cpp api anyways. So instead create a new require('smalloc') to
expose the previous Buffer.alloc/dispose methods, and expose copyOnto
and kMaxLength as well.
Other changes:
* Added documentation and additional tests.
* smalloc::CopyOnto has changed from using assert() to throwing errors
on bad argument values because it is not exposed to the user.
* Minor style fixes.
When using url.parse(), path and pathname usually return '/' when there
is no path available. However when you have a protocol that contains
non-lowercase letters and the input string does not have a trailing
slash, both path and pathname will be undefined.
The Streams API doc is now broken up into 3 sections:
1. API for Consumers
2. API for Implementors
3. Details and Extras
This addresses one of the biggest points of confusion for new users who
start to consume streams, and get the impression that they have to do
lots of extra work and implement classes and such, just to get some data
out of a file.
In fa10b75 the assert to check if data == NULL was remove for
smalloc::Alloc with no callback. It should have also been removed where
a callback is accepted.
No sense in making sure that length == 0 if data == NULL because devs
already have to be responsible for checking that length is the same as
the char* they're passing in.
It hits a compiler bug in gcc <= 4.4 similar to the issue that was
recently addressed in commit 157d2bc:
../deps/v8/include/v8.h: In function ‘char*
node::Buffer::Data(v8::Persistent&) [with TypeName = v8::Object]’:
../src/node_crypto.cc:1123: instantiated from here
../deps/v8/include/v8.h:876: error: ‘class v8::Data’ is not a
function,
../src/node_internals.h:356: error: conflict with ‘template char*
node::Buffer::Data(v8::Persistent&)’
../src/node_internals.h:357: error: in call to ‘Data’
Remove the helper function, it was only used in a couple of places.
Should fix the build on Ubuntu 10.04.
Fixes#5844.
Evented I/O for V8 javascript. [](http://travis-ci.org/joyent/node)
===
### To build:
This repository is an archive of Node.js before the move to [nodejs/node](https://github.com/nodejs/node).
Prerequisites (Unix only):
It still contains issues and pull requests that are relevant to Node versions v0.10 and v0.12, and that were opened before the move to [nodejs/node](https://github.com/nodejs/node).
New issues and pull requests, for all branches, should be opened at [nodejs/node](https://github.com/nodejs/node).
New issues and pull requests opened here will automatically be rejected.
* GCC 4.2 or newer
* Python 2.6 or 2.7
* GNU Make 3.81 or newer
* libexecinfo (FreeBSD and OpenBSD only)
Unix/Macintosh:
./configure
make
make install
If your python binary is in a non-standard location or has a
non-standard name, run the following instead:
export PYTHON=/path/to/python
$PYTHON ./configure
make
make install
Windows:
vcbuild.bat
### To run the tests:
Unix/Macintosh:
make test
Windows:
vcbuild.bat test
### To build the documentation:
make doc
### To read the documentation:
man doc/node.1
Resources for Newcomers
---
- [The Wiki](https://github.com/joyent/node/wiki)
- [nodejs.org](http://nodejs.org/)
- [how to install node.js and npm (node package manager)](http://joyeur.com/2010/12/10/installing-node-and-npm/)
- [list of modules](https://github.com/joyent/node/wiki/modules)
- [searching the npm registry](http://npmjs.org/)
- [list of companies and projects using node](https://github.com/joyent/node/wiki/Projects,-Applications,-and-Companies-Using-Node)
"p3p: policyref=\"http://www.amazon.com/w3c/p3p.xml\",CP=\"CAO DSP LAW CUR ADM IVAo IVDo CONo OTPo OUR DELi PUBi OTRi BUS PHY ONL UNI PUR FIN COM NAV INT DEM CNT STA HEA PRE LOC GOV OTC \"\r\n"
,.headers={{"Date","Wed, 15 May 2013 17:06:33 GMT"}
,{"Server","Server"}
,{"x-amz-id-1","0GPHKXSJQ826RK7GZEB2"}
,{"p3p","policyref=\"http://www.amazon.com/w3c/p3p.xml\",CP=\"CAO DSP LAW CUR ADM IVAo IVDo CONo OTPo OUR DELi PUBi OTRi BUS PHY ONL UNI PUR FIN COM NAV INT DEM CNT STA HEA PRE LOC GOV OTC \""}
This will set a registry for the given scope and login or create a user for
that registry at the same time.
## SEE ALSO
* npm-adduser(1)
* npm-registry(7)
* npm-config(1)
* npm-config(7)
* npmrc(5)
* npm-whoami(1)
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
