`models set` accepts any syntactically valid model ID without checking
the catalog, allowing typos to silently persist in config and fail at
runtime. It also unconditionally adds an empty `{}` entry to
`agents.defaults.models`, bypassing any provider routing constraints.
This commit:
- Validates the model ID against the catalog (skipped when catalog is
empty during initial setup)
- Warns when a new entry is added with empty config (no provider routing)
Closesopenclaw/openclaw#17183✍️ Author: Claude Code with @carrotRakko (AI-written, human-approved)
The gateway unconditionally scheduled a SIGUSR1 restart after every
update.run call, even when the update itself failed (broken deps,
build errors, etc.). This left the process restarting into a broken
state — corrupted node_modules, partial builds — causing a crash loop
that required manual intervention.
Three fixes:
1. Only restart on success: scheduleGatewaySigusr1Restart is now
gated on result.status === "ok". Failed or skipped updates still
write the restart sentinel (so the status can be reported back to
the user) but the running gateway stays alive.
2. Early bail on step failure: deps install, build, and ui:build now
check exit codes immediately (matching the preflight section) so a
failed deps install no longer cascades into a broken build and
ui:build.
3. Auto-repair config during update: the doctor step now runs with
--fix alongside --non-interactive, so unknown config keys left over
from schema changes between versions are stripped automatically
instead of causing a startup validation crash.
The global `agents.defaults.thinkingDefault` forces a single thinking
level for all models. Users running multiple models with different
reasoning capabilities (e.g. Claude with extended thinking, GPT-4o
without, Gemini Flash with lightweight reasoning) cannot optimise the
thinking level per model.
Add an optional `thinkingDefault` field to `AgentModelEntryConfig` so
each entry under `agents.defaults.models` can declare its own default.
Resolution priority: per-model → global → catalog auto-detect.
Example config:
"models": {
"anthropic/claude-sonnet-4-20250514": { "thinkingDefault": "high" },
"openai/gpt-4o": { "thinkingDefault": "off" }
}
Co-authored-by: Cursor <cursoragent@cursor.com>
Add automatic llms.txt awareness so agents check for /llms.txt or
/.well-known/llms.txt when exploring new domains.
Changes:
- System prompt: new 'llms.txt Discovery' section (full mode only,
when web_fetch is available) instructing agents to check for llms.txt
files when visiting new domains
- web_fetch tool: updated description to mention llms.txt discovery
llms.txt is an emerging standard (like robots.txt for AI) that helps
site owners describe how AI agents should interact with their content.
Making this a default behavior helps the ecosystem adopt agent-native
web experiences.
Ref: https://llmstxt.org
When a user sets `agents.defaults.model.primary: "ollama/gemma3:4b"`
but forgets to set OLLAMA_API_KEY, the error is a confusing
"unknown model: ollama/gemma3:4b". The Ollama provider requires any
dummy API key to register (the local server doesn't actually check it),
but this isn't obvious from the error.
Add `buildUnknownModelError()` that detects known local providers
(ollama, vllm) and appends an actionable hint with the env var name
and a link to the relevant docs page.
Before: Unknown model: ollama/gemma3:4b
After: Unknown model: ollama/gemma3:4b. Ollama requires authentication
to be registered as a provider. Set OLLAMA_API_KEY="ollama-local"
(any value works) or run "openclaw configure".
See: https://docs.openclaw.ai/providers/ollamaCloses#17328
The sparkle:version was incorrectly set to '11213' instead of '202602150',
causing the macOS app to not detect the 2026.2.15 update. Sparkle compares
versions as strings, so '11213' < '202602140' (2026.2.14's version), preventing
the update from being offered to users.
Fixesopenclaw/openclaw#18178
When the gateway connection fails due to device token mismatch (e.g., after
re-pairing the device), clear the stored device-auth token so that
subsequent connection attempts can obtain a fresh token.
This fixes the cron tool failing with 'device token mismatch' error
after running 'openclaw configure' to re-pair the device.
Fixes#18175
When an agent config specifies `model: { primary: "..." }` without
an explicit `fallbacks` array, the existing code replaced the entire
model object from `agents.defaults`—discarding the default fallbacks.
This caused cron jobs (and agent sessions) to have only one model
candidate (the pinned model) plus the global primary as a final
fallback, skipping all intermediate fallback models.
The fix merges the agent model override into the existing defaults
model object using spread, so that keys like `fallbacks` survive
when the agent only overrides `primary`. Agents can still explicitly
override or clear fallbacks by providing their own `fallbacks` array.
Reproduction scenario:
- `agents.defaults.model = { primary: "codex", fallbacks: ["opus", "flash", "deepseek"] }`
- Agent config: `model: { primary: "codex" }`
- Cron job pins: `model: "flash"`
- Before fix: fallback candidates = [flash, codex] (3 models lost)
- After fix: fallback candidates = [flash, opus, deepseek, ..., codex]
Add a `spawn` action to the /subagents command handler that invokes
spawnSubagentDirect() to deterministically launch a named subagent.
Usage: /subagents spawn <agentId> <task> [--model <model>] [--thinking <level>]
Also includes the shared subagent-spawn module extraction (same as the
refactor/extract-shared-subagent-spawn branch) since it hasn't merged yet.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Use stricter regex: /^[A-Za-z0-9+/]*={0,2}$/ ensures = only at end
- Normalize URL-safe base64 to standard (- → +, _ → /)
- Added tests for padding in wrong position and URL-safe normalization
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Adds explicit base64 format validation in sanitizeContentBlocksImages()
to prevent invalid image data from being sent to the Anthropic API.
The Problem:
- Node's Buffer.from(str, "base64") silently ignores invalid characters
- Invalid base64 passes local validation but fails at Anthropic's stricter API
- Once corrupted data persists in session history, every API call fails
The Fix:
- Add validateAndNormalizeBase64() function that:
- Strips data URL prefixes (e.g., "data:image/png;base64,...")
- Validates base64 character set with regex
- Checks for valid padding (0-2 '=' chars)
- Validates length is proper for base64 encoding
- Invalid images are replaced with descriptive text blocks
- Prevents permanent session corruption
Tests:
- Rejects invalid base64 characters
- Strips data URL prefixes correctly
- Rejects invalid padding
- Rejects invalid length
- Handles empty data gracefully
Closes#18212
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Update test expectation: 'defaults to enable on Node 22'
- Update comment in fetch.ts to explain IPv4 fallback rationale
- Addresses greptile review feedback
Fixes issue where Telegram fails to send messages when IPv6 is configured
but not functional on the network.
Problem:
- Many networks (especially in Latin America) have IPv6 configured but
not properly routed by ISP/router
- Node.js tries IPv6 first, gets 'Network is unreachable' error
- With autoSelectFamily=false, Node doesn't fallback to IPv4
- Result: All Telegram API calls fail
Solution:
- Change default from false to true for Node.js 22+
- This enables automatic IPv4 fallback when IPv6 fails
- Config option channels.telegram.network.autoSelectFamily still available
for users who need to override
Symptoms fixed:
- Health check: Telegram | WARN | failed (unknown) - fetch failed
- Logs: Network request for 'sendMessage' failed
- Bot receives messages but cannot send replies
Tested on:
- macOS 26.2 (Sequoia)
- Node.js v22.15.0
- OpenClaw 2026.2.12
- Network with IPv6 configured but not routed
On macOS, `openclaw gateway install` hardcodes the system node
(/opt/homebrew/bin/node) in the launchd plist, ignoring the node from
version managers (fnm/nvm/volta). This causes the Gateway to run a
different node version than the user's shell environment.
Two fixes:
1. `resolvePreferredNodePath` now checks `process.execPath` first.
If the currently running node is a supported version, use it directly.
This respects the user's active version manager selection.
2. `buildMinimalServicePath` now includes version manager bin directories
on macOS (fnm, nvm, volta, pnpm, bun), matching the existing Linux
behavior.
Fixes#18090
Related: #6061, #6064
Follow-up to #18066 — three session file write sites were missed:
- auto-reply/reply/session.ts: forked session transcript header
- pi-embedded-runner/session-manager-init.ts: session file reset
- gateway/server-methods/sessions.ts: compacted transcript rewrite
All now use mode 0o600 consistent with transcript.ts and chat.ts.
Add sender_id (ctx.SenderId) to the openclaw.inbound_meta.v1 payload
so agents can reference it for moderation actions (delete, ban, etc.)
without relying on user-controlled text fields.
message_id and chat_id were already present; sender_id was the missing
piece needed for complete group moderation workflows.
When searching in FTS-only mode (no embedding provider), extract meaningful
keywords from conversational queries using LLM to improve search results.
Changes:
- New query-expansion module with keyword extraction
- Supports English and Chinese stop word filtering
- Null safety guards for FTS-only mode (provider can be null)
- Lint compliance fixes for string iteration
This helps users find relevant memory entries even with vague queries.
When no embedding provider is available (e.g., OAuth mode without API keys),
memory_search now falls back to FTS-only mode instead of returning disabled: true.
Changes:
- embeddings.ts: return null provider with reason instead of throwing
- manager.ts: handle null provider, use FTS-only search mode
- manager-search.ts: allow searching all models when provider is undefined
- memory-tool.ts: expose search mode in results
The search results now include a 'mode' field indicating 'hybrid' or 'fts-only'.
Extract parseGeminiAuth() to shared infra module and use it in both
embeddings-gemini.ts and inline-data.ts.
Previously, inline-data.ts directly set x-goog-api-key header without
handling OAuth JSON format. Now it properly supports both traditional
API keys and OAuth tokens.
Add parseGeminiAuth() to detect OAuth JSON format ({"token": "...", "projectId": "..."})
and use Bearer token authentication instead of x-goog-api-key header.
This allows OAuth users (using gemini-cli-auth extension) to use memory_search
with Gemini embedding API.
Walk users through Linq setup via `openclaw channels add` wizard
instead of requiring manual JSON config editing. Prompts for API
token, phone number, and webhook config with sensible defaults.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Send read receipt and typing indicator immediately on inbound messages
for a more natural iMessage experience. Add User-Agent header to all
Linq API requests. Fix delivery payload to use .text instead of .body.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fixes incorrect path matching that would reject valid webhooks with
querystrings and match unintended prefixes like /linq-webhookX.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a complete Linq iMessage channel adapter that replaces the existing
iMessage channel's Mac Mini + dedicated Apple ID + SSH wrapper + Full Disk
Access setup with a single API key and phone number.
Core implementation (src/linq/):
- types.ts: Linq webhook event and message types
- accounts.ts: Multi-account resolution from config (env/file/inline token)
- send.ts: REST outbound via Linq Blue V3 API (messages, typing, reactions)
- probe.ts: Health check via GET /v3/phonenumbers
- monitor.ts: Webhook HTTP server with HMAC-SHA256 signature verification,
replay protection, inbound debouncing, and full dispatch pipeline integration
Extension plugin (extensions/linq/):
- ChannelPlugin implementation with config, security, setup, outbound,
gateway, and status adapters
- Supports direct and group chats, reactions, and media
Wiring:
- Channel registry, dock, config schema, plugin-sdk exports, and plugin
runtime all updated to include the new linq channel
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Address review feedback: log a warning when endCall fails on stream
disconnect instead of silently discarding the error.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When a Twilio media stream disconnects (e.g., caller hangs up or
network drops), the call object was left in an active state indefinitely.
This caused "stuck calls" that consumed resources and blocked new calls.
Now calls are automatically ended when their media stream closes,
matching the expected lifecycle behavior.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Address review feedback: log a warning when the stale call reaper
fails to end a call instead of silently discarding the error.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Adds a periodic reaper that automatically ends calls older than a
configurable threshold. This catches calls stuck in unexpected states,
such as notify-mode calls that never receive a terminal webhook from
the provider.
New config option:
staleCallReaperSeconds: number (default: 0 = disabled)
When enabled, checks every 30 seconds and ends calls exceeding the
max age. Recommended value: 120-300 for production deployments.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
