feat: use signed digits to reduce bucket size

- Replace 64-bit CIOS Montgomery multiplication with 32-bit MAD chains
    (mad.lo.cc/madc.hi.cc), exploiting native 2x throughput of 32-bit ops
    on NVIDIA GPUs via even/odd accumulator separation

  - Add fp_mont_sqr using a triangular MAD chain (upper triangle computed
    once and doubled, diagonal added separately), saving of the
    multiplications versus treating squaring as a general multiplication

  - Add fp_add_lazy/fp_sub_lazy (and Fp2 variants): skip the final
    conditional subtraction when the result feeds fp_mont_mul, which
    accepts inputs in [0, 2p). Wired into fp2_mont_mul, fp2_mont_square,
    and G1/G2 projective_point_double

  - Replace all fp_mont_mul(c, a, a) squaring patterns with fp_mont_sqr
    across curve.cu and fp2.cu (point addition, doubling, inversion)

.cargo/audit.toml

@@ -4,6 +4,9 @@ ignore = [
     "RUSTSEC-2024-0436",
     # Ignoring unmaintained 'bincode' crate. Getting rid of it would be too complex on the short term.
     "RUSTSEC-2025-0141",
+    # Ignoring unsoundness in 'rand' with custom logger. Rand update is currently blocked by
+    # arkworks and we do not use custom loggers.
+    "RUSTSEC-2026-0097",
 ]
 
 [output]

.github/actions/gpu_setup/action.yml

@@ -25,12 +25,14 @@ runs:
         sudo bash cmake-"${CMAKE_VERSION}"-linux-x86_64.sh --skip-license --prefix=/usr/ --exclude-subdir
 
         # Disable unattended-upgrades to avoid lock issues
-        sudo systemctl disable --now unattended-upgrades
+        sudo systemctl mask --now unattended-upgrades
+        sudo systemctl stop --now unattended-upgrades
 
         sudo apt-get clean
         sudo rm -rf /var/lib/apt/lists/*
+        sudo apt purge -y unattended-upgrades
+
         sudo apt update
-        sudo apt remove -y unattended-upgrades
         sudo apt install -y cmake-format libclang-dev
       env:
         CMAKE_VERSION: 3.29.6
@@ -70,10 +72,13 @@ runs:
         sudo dpkg -i "${CUDA_KEYRING_PACKAGE}"
 
         # Disable unattended-upgrades to avoid lock issues
-        sudo systemctl disable --now unattended-upgrades
+        sudo systemctl mask --now unattended-upgrades
+        sudo systemctl stop --now unattended-upgrades
 
         sudo apt-get clean
         sudo rm -rf /var/lib/apt/lists/*
+        sudo apt purge -y unattended-upgrades
+
         sudo apt update
         sudo apt -y install cuda-toolkit-"${TOOLKIT_VERSION}"
 

.github/workflows/aws_data_tests.yml

@@ -1,5 +1,5 @@
-# Run backward compatibility tests
-name: aws_tfhe_backward_compat_tests
+# Run data related tests
+name: aws_data_tests
 
 env:
   CARGO_TERM_COLOR: always
@@ -30,8 +30,8 @@ permissions:
 # zizmor: ignore[concurrency-limits] concurrency is managed after instance setup to ensure safe provisioning
 
 jobs:
-  backward-compat-tests:
-    name: aws_tfhe_backward_compat_tests/backward-compat-tests (bpr)
+  data-tests:
+    name: aws_data_tests/data-tests (bpr)
     if: (github.event_name == 'push' && github.repository == 'zama-ai/tfhe-rs') ||
       github.event_name != 'push'
     runs-on: "runs-on=${{ github.run_id }}/runner=cpu-small"
@@ -49,22 +49,24 @@ jobs:
       - name: Get LFS data sha
         id: hash-lfs-data
         run: |
-          SHA=$(git lfs ls-files -l -I utils/tfhe-backward-compat-data | sha256sum | cut -d' ' -f1)
+          SHA=$(git lfs ls-files -l -I utils/tfhe-backward-compat-data,tests/corrupted_inputs_deserialization | sha256sum | cut -d' ' -f1)
           echo "sha=${SHA}" >> "${GITHUB_OUTPUT}"
 
       - name: Retrieve data from cache
         id: retrieve-data-cache
-        uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/restore@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         with:
           path: |
             utils/tfhe-backward-compat-data/**/*.cbor
             utils/tfhe-backward-compat-data/**/*.bcode
+            tests/corrupted_inputs_deserialization/**/*.bcode
           key: ${{ steps.hash-lfs-data.outputs.sha }}
 
       - name: Pull test data
         if: steps.retrieve-data-cache.outputs.cache-hit != 'true'
         run: |
           make pull_backward_compat_data
+          make pull_corrupted_inputs_data
 
       # Pull token was stored by action/checkout to be used by lfs, we don't need it anymore
       - name: Remove git credentials
@@ -80,14 +82,19 @@ jobs:
         run: |
           make test_backward_compatibility_ci
 
+      - name: Run corrupted inputs deserialization tests
+        run: |
+          make test_corrupted_inputs_ci
+
       - name: Store data in cache
         if: steps.retrieve-data-cache.outputs.cache-hit != 'true'
         continue-on-error: true
-        uses: actions/cache/save@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/save@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         with:
           path: |
             utils/tfhe-backward-compat-data/**/*.cbor
             utils/tfhe-backward-compat-data/**/*.bcode
+            tests/corrupted_inputs_deserialization/**/*.bcode
           key: ${{ steps.hash-lfs-data.outputs.sha }}
 
       - name: Set pull-request URL

.github/workflows/aws_tfhe_fast_tests.yml

@@ -16,7 +16,6 @@ env:
   PULL_REQUEST_MD_LINK: ""
   CHECKOUT_TOKEN: ${{ secrets.REPO_CHECKOUT_TOKEN || secrets.GITHUB_TOKEN }}
 
-
 on:
   # Allows you to run this workflow manually from the Actions tab as an alternative.
   workflow_dispatch:
@@ -37,6 +36,7 @@ jobs:
       csprng_test: ${{ env.IS_PULL_REQUEST == 'false' || steps.changed-files.outputs.csprng_any_changed }}
       zk_pok_test: ${{ env.IS_PULL_REQUEST == 'false' || steps.changed-files.outputs.zk_pok_any_changed }}
       versionable_test: ${{ env.IS_PULL_REQUEST == 'false' || steps.changed-files.outputs.versionable_any_changed }}
+      safe_serialize_test: ${{ env.IS_PULL_REQUEST == 'false' || steps.changed-files.outputs.safe_serialize_any_changed }}
       core_crypto_test: ${{ env.IS_PULL_REQUEST == 'false' ||
         steps.changed-files.outputs.core_crypto_any_changed ||
         steps.changed-files.outputs.dependencies_any_changed }}
@@ -64,12 +64,12 @@ jobs:
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
         with:
           fetch-depth: 0
-          persist-credentials: 'false'
+          persist-credentials: "false"
           token: ${{ env.CHECKOUT_TOKEN }}
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             dependencies:
@@ -79,6 +79,7 @@ jobs:
               - tfhe-zk-pok/**
               - utils/tfhe-versionable/**
               - utils/tfhe-versionable-derive/**
+              - utils/tfhe-safe-serialize/**
             csprng:
               - tfhe-csprng/**
             zk_pok:
@@ -86,6 +87,8 @@ jobs:
             versionable:
               - utils/tfhe-versionable/**
               - utils/tfhe-versionable-derive/**
+            safe_serialize:
+              - utils/tfhe-safe-serialize/**
             core_crypto:
               - tfhe/src/core_crypto/**
             boolean:
@@ -122,6 +125,7 @@ jobs:
           steps.changed-files.outputs.csprng_any_changed == 'true' ||
           steps.changed-files.outputs.zk_pok_any_changed == 'true' ||
           steps.changed-files.outputs.versionable_any_changed == 'true' ||
+          steps.changed-files.outputs.safe_serialize_any_changed == 'true' ||
           steps.changed-files.outputs.core_crypto_any_changed == 'true' ||
           steps.changed-files.outputs.boolean_any_changed == 'true' ||
           steps.changed-files.outputs.shortint_any_changed == 'true' ||
@@ -145,7 +149,7 @@ jobs:
       - name: Checkout tfhe-rs
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
         with:
-          persist-credentials: 'false'
+          persist-credentials: "false"
           token: ${{ env.CHECKOUT_TOKEN }}
 
       - name: Install latest stable
@@ -170,6 +174,11 @@ jobs:
         run: |
           make test_versionable
 
+      - name: Run tfhe-safe-serialize tests
+        if: needs.should-run.outputs.safe_serialize_test == 'true'
+        run: |
+          make test_safe_serialize
+
       - name: Run core tests
         if: needs.should-run.outputs.core_crypto_test == 'true'
         run: |
@@ -191,7 +200,7 @@ jobs:
 
       - name: Node cache restoration
         id: node-cache
-        uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/restore@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         with:
           path: |
             ~/.nvm
@@ -204,7 +213,7 @@ jobs:
           make install_node
 
       - name: Node cache save
-        uses: actions/cache/save@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/save@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         if: steps.node-cache.outputs.cache-hit != 'true'
         with:
           path: |

.github/workflows/aws_tfhe_integer_tests.yml

@@ -56,7 +56,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             integer:

.github/workflows/aws_tfhe_noise_checks.yml

@@ -34,7 +34,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -99,7 +99,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/aws_tfhe_signed_integer_tests.yml

@@ -57,7 +57,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             integer:

.github/workflows/aws_tfhe_tests.yml

@@ -78,7 +78,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             dependencies:

.github/workflows/aws_tfhe_wasm_tests.yml

@@ -14,12 +14,11 @@ env:
   PULL_REQUEST_MD_LINK: ""
   CHECKOUT_TOKEN: ${{ secrets.REPO_CHECKOUT_TOKEN || secrets.GITHUB_TOKEN }}
 
-
 on:
   # Allows you to run this workflow manually from the Actions tab as an alternative.
   workflow_dispatch:
   pull_request:
-    types: [ labeled ]
+    types: [labeled]
 
 permissions:
   contents: read
@@ -32,21 +31,21 @@ jobs:
     if: github.event_name == 'workflow_dispatch' || contains(github.event.label.name, 'approved')
     runs-on: ubuntu-latest
     permissions:
-      pull-requests: read  # Needed to check for file change
+      pull-requests: read # Needed to check for file change
     outputs:
       wasm_test: ${{ github.event_name == 'workflow_dispatch' ||
-          steps.changed-files.outputs.wasm_any_changed }}
+        steps.changed-files.outputs.wasm_any_changed }}
     steps:
       - name: Checkout tfhe-rs
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
         with:
           fetch-depth: 0
-          persist-credentials: 'false'
+          persist-credentials: "false"
           token: ${{ env.CHECKOUT_TOKEN }}
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             wasm:
@@ -63,6 +62,7 @@ jobs:
                 - tfhe/js_on_wasm_tests/**
                 - tfhe/web_wasm_parallel_tests/**
                 - utils/tfhe-versionable/**
+                - utils/tfhe-safe-serialize/**
                 - .github/workflows/aws_tfhe_wasm_tests.yml
 
   wasm-tests:
@@ -78,7 +78,7 @@ jobs:
       - name: Checkout tfhe-rs
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
         with:
-          persist-credentials: 'false'
+          persist-credentials: "false"
           token: ${{ env.CHECKOUT_TOKEN }}
 
       - name: Install latest stable
@@ -92,7 +92,7 @@ jobs:
 
       - name: Node cache restoration
         id: node-cache
-        uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/restore@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         with:
           path: |
             ~/.nvm
@@ -105,7 +105,7 @@ jobs:
           make install_node
 
       - name: Node cache save
-        uses: actions/cache/save@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/save@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         if: steps.node-cache.outputs.cache-hit != 'true'
         with:
           path: |
@@ -117,6 +117,8 @@ jobs:
         run: |
           make install_chrome_browser
           make install_chrome_web_driver
+          make install_firefox_browser
+          make install_firefox_web_driver
 
       - name: Run fmt checks
         run: |
@@ -126,9 +128,20 @@ jobs:
         run: |
           make test_nodejs_wasm_api_ci
 
+      - name: Run wasm_par_mq tests
+        run: |
+          make test_wasm_par_mq_chrome_ci
+          make test_wasm_par_mq_firefox_ci
+
       - name: Run parallel wasm tests
         run: |
           make test_web_js_api_parallel_chrome_ci
+          make test_web_js_api_parallel_firefox_ci
+
+      - name: Run cross origin wasm tests
+        run: |
+          make test_web_js_api_cross_origin_chrome_ci
+          make test_web_js_api_cross_origin_firefox_ci
 
       - name: Run x86_64/wasm zk compatibility tests
         run: |

.github/workflows/backward_compat_pr_change_report.yml

@@ -0,0 +1,97 @@
+# On PR: when snapshot files are modified, generates a diff report between
+# the base branch and the PR snapshots, then posts it as a PR comment.
+# Helps reviewers understand what versioned types changed.
+name: backward_compat_pr_change_report
+
+on:
+  pull_request:
+
+env:
+  CHECKOUT_TOKEN: ${{ secrets.REPO_CHECKOUT_TOKEN || secrets.GITHUB_TOKEN }}
+
+permissions:
+  contents: read
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref }}
+  cancel-in-progress: true
+
+jobs:
+  should-run:
+    name: backward_compat_pr_change_report/should-run
+    runs-on: ubuntu-latest
+    permissions:
+      pull-requests: read  # Needed to check for file change
+    outputs:
+      backward_report: ${{ steps.changed-files.outputs.backward_any_changed }}
+    steps:
+      - name: Checkout tfhe-rs
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
+        with:
+          fetch-depth: 0
+          persist-credentials: 'false'
+          token: ${{ env.CHECKOUT_TOKEN }}
+
+      - name: Check for file changes
+        id: changed-files
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
+        with:
+          files_yaml: |
+            backward:
+              - utils/tfhe-lints/snapshots/*.json
+
+  change-report:
+    name: backward_compat_pr_change_report/change-report (bpr)
+    runs-on: ubuntu-latest
+    needs: should-run
+    if:
+      needs.should-run.outputs.backward_report == 'true'
+    permissions:
+      pull-requests: write # To send and modify message in the PR
+    steps:
+      - name: Checkout PR head
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
+        with:
+          persist-credentials: 'false'
+          path: head
+
+      - name: Checkout base branch
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
+        with:
+          persist-credentials: 'false'
+          ref: ${{ github.event.pull_request.base.sha }}
+          path: base
+
+      - name: Generate diff report
+        id: report
+        run: |
+          cd head && make backward_snapshot_report \
+            BASE_SNAPSHOT_DIR=../base/utils/tfhe-lints/snapshots \
+            HEAD_SNAPSHOT_DIR=utils/tfhe-lints/snapshots \
+            OUTPUT_FILE=../report.md
+
+          if [ -s ../report.md ]; then
+            echo "has_report=true" >> "$GITHUB_OUTPUT"
+          elif [ -f ../report.md ]; then
+            echo "has_report=false" >> "$GITHUB_OUTPUT"
+          else
+            echo "::error::report.md was not created — something went wrong"
+            exit 1
+          fi
+
+      - name: Find existing comment
+        if: steps.report.outputs.has_report == 'true'
+        id: find-comment
+        uses: peter-evans/find-comment@b30e6a3c0ed37e7c023ccd3f1db5c6c0b0c23aad # v4.0.0
+        with:
+          issue-number: ${{ github.event.pull_request.number }}
+          body-includes: '**Backward-compat snapshot:'
+
+      - name: Comment on PR
+        if: steps.report.outputs.has_report == 'true'
+        uses: peter-evans/create-or-update-comment@e8674b075228eee787fea43ef493e45ece1004c9 # v5.0.0
+        with:
+          comment-id: ${{ steps.find-comment.outputs.comment-id }}
+          issue-number: ${{ github.event.pull_request.number }}
+          body-path: report.md
+          edit-mode: replace

.github/workflows/backward_compat_snapshot_consistency.yml

@@ -0,0 +1,54 @@
+# Generates snapshots from code and diffs against committed base files.
+# Ensures snapshots are up to date on PRs and catches stale ones on main.
+name: backward_compat_snapshot_consistency
+
+env:
+  CARGO_TERM_COLOR: always
+  ACTION_RUN_URL: ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}
+  RUST_BACKTRACE: "full"
+  RUST_MIN_STACK: "8388608"
+  SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}
+  SLACK_ICON: https://pbs.twimg.com/profile_images/1274014582265298945/OjBKP9kn_400x400.png
+  SLACK_USERNAME: ${{ secrets.BOT_USERNAME }}
+  SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+  SLACKIFY_MARKDOWN: true
+
+on:
+  workflow_dispatch:
+  pull_request:
+  push:
+    branches:
+      - main
+
+permissions:
+  contents: read
+
+jobs:
+  snapshot-consistency:
+    name: backward_compat_snapshot_consistency/snapshot-consistency (bpr)
+    runs-on: ubuntu-latest
+    concurrency:
+      group: ${{ github.workflow }}-${{ github.head_ref || github.sha }}
+      cancel-in-progress: ${{ github.event_name != 'push' }}
+    steps:
+      - name: Checkout tfhe-rs
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
+        with:
+          persist-credentials: 'false'
+
+      - name: Generate snapshots from current code
+        run: make backward_snapshot_head
+
+      - name: Check snapshot consistency
+        run: ./scripts/check_snapshot_consistency.sh
+
+      - name: Slack Notification
+        if: ${{ failure() || (cancelled() && github.event_name == 'push') }}
+        continue-on-error: true
+        uses: rtCamp/action-slack-notify@e31e87e03dd19038e411e38ae27cbad084a90661
+        env:
+          SLACK_COLOR: ${{ job.status }}
+          SLACK_MESSAGE: >-
+            Backward compatibility snapshot consistency check: ${{ job.status }}.
+            Snapshots may be outdated — run `make backward_snapshot_base` and commit.
+            [See details](${{ env.ACTION_RUN_URL }})

.github/workflows/benchmark_cpu.yml

@@ -19,7 +19,7 @@ on:
           - shortint_oprf
           - hlapi_unsigned
           - hlapi_signed
-          - hlapi_erc20
+          - hlapi_erc7984
           - hlapi_dex
           - hlapi_noise_squash
           - hlapi_kvstore
@@ -72,8 +72,45 @@ permissions: {}
 # zizmor: ignore[concurrency-limits] only Zama organization members can trigger this workflow
 
 jobs:
+  parse-inputs:
+    name: benchmark_cpu/parse-inputs
+    runs-on: ubuntu-latest
+    outputs:
+      additional_file_to_parse: ${{ steps.set_file_to_parse.outputs.additional_file_to_parse }}
+    steps:
+      - name: Get additional file to parse
+        id: set_file_to_parse
+        shell: python
+        env:
+          INPUTS_COMMAND: ${{ inputs.command }}
+        run: |
+          import os
+
+          inputs_command = os.environ["INPUTS_COMMAND"]
+          output_file = os.environ["GITHUB_OUTPUT"]
+
+          files_to_parse = []
+
+          if inputs_command == "integer_zk":
+            files_to_parse.append("pke_zk_crs_sizes.csv")
+          elif inputs_command == "hlapi_erc7984":
+            files_to_parse.append("erc7984_pbs_count.csv")
+          elif inputs_command == "hlapi_dex":
+            files_to_parse.extend(
+              [
+                "dex_swap_request_update_dex_balance_pbs_count.csv",
+                "dex_swap_request_finalize_pbs_count.csv",
+                "dex_swap_claim_prepare_pbs_count.csv",
+                "dex_swap_claim_update_dex_balance_pbs_count.csv"
+              ]
+            )
+
+          with open(output_file, "a") as f:
+            f.write(f"""additional_file_to_parse={",".join(files_to_parse)}\n""")
+
   run-benchmarks:
     name: benchmark_cpu/run-benchmarks
+    needs: parse-inputs
     uses: ./.github/workflows/benchmark_cpu_common.yml
     with:
       command: ${{ inputs.command }}
@@ -81,6 +118,7 @@ jobs:
       bench_type: ${{ inputs.bench_type }}
       params_type: ${{ inputs.params_type }}
       precisions_set: ${{ inputs.precisions_set }}
+      additional_file_to_parse: ${{ needs.parse-inputs.outputs.additional_file_to_parse }}
     secrets:
       BOT_USERNAME: ${{ secrets.BOT_USERNAME }}
       SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}

.github/workflows/benchmark_cpu_common.yml

@@ -107,7 +107,7 @@ jobs:
             ]:
               f.write(f"""{env_name}=["{'", "'.join(values_to_join)}"]\n""")
 
-      - name: Set martix arguments outputs
+      - name: Set matrix arguments outputs
         id: set_matrix_args
         run: | # zizmor: ignore[template-injection] these env variable are safe
           {
@@ -126,7 +126,7 @@ jobs:
     steps:
       - name: Start instance
         id: start-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -223,7 +223,7 @@ jobs:
           results_type: ${{ inputs.additional_results_type }}
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_${{ matrix.command }}_${{ matrix.op_flavor }}_${{ matrix.bench_type }}_${{ matrix.params_type }}
           path: ${{ env.RESULTS_FILENAME }}
@@ -261,7 +261,7 @@ jobs:
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/benchmark_cpu_weekly.yml

@@ -108,14 +108,14 @@ jobs:
       SLAB_URL: ${{ secrets.SLAB_URL }}
       SLAB_BASE_URL: ${{ secrets.SLAB_BASE_URL }}
 
-  run-benchmarks-hlapi-erc20:
-    name: benchmark_cpu_weekly/run-benchmarks-hlapi-erc20
+  run-benchmarks-hlapi-erc7984:
+    name: benchmark_cpu_weekly/run-benchmarks-hlapi-erc7984
     if: needs.prepare-inputs.outputs.is_weekly_bench_group_2 == 'true'
     needs: prepare-inputs
     uses: ./.github/workflows/benchmark_cpu_common.yml
     with:
-      command: hlapi_erc20
-      additional_file_to_parse: erc20_pbs_count.csv
+      command: hlapi_erc7984
+      additional_file_to_parse: erc7984_pbs_count.csv
     secrets:
       BOT_USERNAME: ${{ secrets.BOT_USERNAME }}
       SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}

.github/workflows/benchmark_ct_key_sizes.yml

@@ -33,7 +33,7 @@ jobs:
     steps:
       - name: Start instance
         id: start-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -99,7 +99,7 @@ jobs:
           --append-results
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_ct_key_sizes
           path: ${{ env.RESULTS_FILENAME }}
@@ -137,7 +137,7 @@ jobs:
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/benchmark_documentation.yml

@@ -17,6 +17,10 @@ on:
         description: "Run GPU core-crypto benchmarks"
         type: boolean
         default: true
+      run-gpu-zk-benchmarks:
+        description: "Run GPU ZK benchmarks"
+        type: boolean
+        default: true
       run-hpu-benchmarks:
         description: "Run HPU benchmarks"
         type: boolean
@@ -36,7 +40,7 @@ jobs:
     uses: ./.github/workflows/benchmark_cpu_common.yml
     if: inputs.run-cpu-benchmarks
     with:
-      command: integer,hlapi_erc20
+      command: integer,hlapi_erc7984
       op_flavor: fast_default
       bench_type: both
       precisions_set: documentation
@@ -91,7 +95,7 @@ jobs:
     with:
       profile: multi-h100-sxm5
       hardware_name: n3-H100-SXM5x8
-      command: integer_multi_bit,hlapi_erc20
+      command: integer_multi_bit,hlapi_erc7984
       op_flavor: fast_default
       bench_type: both
       precisions_set: documentation
@@ -110,7 +114,7 @@ jobs:
     uses: ./.github/workflows/benchmark_hpu_common.yml
     if: inputs.run-hpu-benchmarks
     with:
-      command: integer,hlapi_erc20
+      command: integer,hlapi_erc7984
       op_flavor: default
       bench_type: both
       precisions_set: documentation
@@ -165,21 +169,42 @@ jobs:
       SLAB_URL: ${{ secrets.SLAB_URL }}
       SLAB_BASE_URL: ${{ secrets.SLAB_BASE_URL }}
 
+  run-benchmarks-gpu-zk-server:
+    name: benchmark_documentation/run-benchmarks-gpu-zk-server
+    uses: ./.github/workflows/benchmark_gpu_common.yml
+    if: inputs.run-gpu-zk-benchmarks
+    with:
+      profile: multi-h100-sxm5
+      hardware_name: n3-H100-SXM5x8
+      command: integer_zk
+      op_flavor: default
+      bench_type: both
+    secrets:
+      BOT_USERNAME: ${{ secrets.BOT_USERNAME }}
+      SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}
+      SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+      REPO_CHECKOUT_TOKEN: ${{ secrets.REPO_CHECKOUT_TOKEN }}
+      JOB_SECRET: ${{ secrets.JOB_SECRET }}
+      SLAB_ACTION_TOKEN: ${{ secrets.SLAB_ACTION_TOKEN }}
+      SLAB_URL: ${{ secrets.SLAB_URL }}
+      SLAB_BASE_URL: ${{ secrets.SLAB_BASE_URL }}
+
   generate-svgs-with-benchmarks-run:
     name: benchmark-documentation/generate-svgs-with-benchmarks-run
     if: ${{ always() &&
-      (inputs.run-cpu-benchmarks || inputs.run-gpu-integer-benchmarks || inputs.run-gpu-core-crypto-benchmarks ||inputs.run-hpu-benchmarks) &&
+      (inputs.run-cpu-benchmarks || inputs.run-gpu-integer-benchmarks || inputs.run-gpu-core-crypto-benchmarks || inputs.run-gpu-zk-benchmarks || inputs.run-hpu-benchmarks) &&
       inputs.generate-svgs }}
     needs: [
       run-benchmarks-cpu-integer, run-benchmarks-gpu-integer, run-benchmarks-hpu-integer,
       run-benchmarks-cpu-zk-server, run-benchmarks-cpu-zk-client,
-      run-benchmarks-cpu-core-crypto, run-benchmarks-gpu-core-crypto
+      run-benchmarks-cpu-core-crypto, run-benchmarks-gpu-core-crypto,
+      run-benchmarks-gpu-zk-server
     ]
     uses: ./.github/workflows/generate_svgs.yml
     with:
       time_span_days: 5
       generate-cpu-svgs: ${{ inputs.run-cpu-benchmarks }}
-      generate-gpu-svgs: ${{ inputs.run-gpu-integer-benchmarks || inputs.run-gpu-core-crypto-benchmarks }}
+      generate-gpu-svgs: ${{ inputs.run-gpu-integer-benchmarks || inputs.run-gpu-core-crypto-benchmarks || inputs.run-gpu-zk-benchmarks }}
       generate-hpu-svgs: ${{ inputs.run-hpu-benchmarks }}
     secrets:
       DATA_EXTRACTOR_DATABASE_USER: ${{ secrets.DATA_EXTRACTOR_DATABASE_USER }}
@@ -188,7 +213,7 @@ jobs:
 
   generate-svgs-without-benchmarks-run:
     name: benchmark-documentation/generate-svgs-without-benchmarks-run
-    if: ${{ !(inputs.run-cpu-benchmarks || inputs.run-gpu-integer-benchmarks || inputs.run-gpu-core-crypto-benchmarks || inputs.run-hpu-benchmarks) &&
+    if: ${{ !(inputs.run-cpu-benchmarks || inputs.run-gpu-integer-benchmarks || inputs.run-gpu-core-crypto-benchmarks || inputs.run-gpu-zk-benchmarks || inputs.run-hpu-benchmarks) &&
       inputs.generate-svgs }}
     uses: ./.github/workflows/generate_svgs.yml
     with:

.github/workflows/benchmark_gpu.yml

@@ -34,9 +34,10 @@ on:
           - tfhe_zk_pok
           - msm_zk
           - integer_zk
+          - integer_zk_experimental
           - integer_aes
           - integer_aes256
-          - hlapi_erc20
+          - hlapi_erc7984
           - hlapi_dex
           - hlapi_noise_squash
       op_flavor:
@@ -87,6 +88,7 @@ jobs:
     outputs:
       profile: ${{ steps.parse_profile.outputs.profile }}
       hardware_name: ${{ steps.parse_hardware_name.outputs.name }}
+      additional_file_to_parse: ${{ steps.set_file_to_parse.outputs.additional_file_to_parse }}
     env:
       INPUTS_PROFILE: ${{ inputs.profile }}
     steps:
@@ -106,6 +108,36 @@ jobs:
           NAME=$(echo "${INPUTS_PROFILE}" | sed 's|.*[[:space:]](\(.*\))|\1|')
           echo "name=${NAME}" >> "${GITHUB_OUTPUT}"
 
+      - name: Get additional file to parse
+        id: set_file_to_parse
+        shell: python
+        env:
+          INPUTS_COMMAND: ${{ inputs.command }}
+        run: |
+          import os
+
+          inputs_command = os.environ["INPUTS_COMMAND"]
+          output_file = os.environ["GITHUB_OUTPUT"]
+
+          files_to_parse = []
+
+          if inputs_command == "integer_zk":
+            files_to_parse.append("pke_zk_crs_sizes.csv")
+          elif inputs_command == "hlapi_erc7984":
+            files_to_parse.append("erc7984_pbs_count.csv")
+          elif inputs_command == "hlapi_dex":
+            files_to_parse.extend(
+              [
+                "dex_swap_request_update_dex_balance_pbs_count.csv",
+                "dex_swap_request_finalize_pbs_count.csv",
+                "dex_swap_claim_prepare_pbs_count.csv",
+                "dex_swap_claim_update_dex_balance_pbs_count.csv"
+              ]
+            )
+
+          with open(output_file, "a") as f:
+            f.write(f"""additional_file_to_parse={",".join(files_to_parse)}\n""")
+
   run-benchmarks:
     name: benchmark_gpu/run-benchmarks
     needs: parse-inputs
@@ -118,6 +150,7 @@ jobs:
       bench_type: ${{ inputs.bench_type }}
       params_type: ${{ inputs.params_type }}
       precisions_set: ${{ inputs.precisions_set }}
+      additional_file_to_parse: ${{ needs.parse-inputs.outputs.additional_file_to_parse }}
     secrets:
       BOT_USERNAME: ${{ secrets.BOT_USERNAME }}
       SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}

.github/workflows/benchmark_gpu_4090.yml

@@ -89,7 +89,7 @@ jobs:
           REF_NAME: ${{ github.ref_name }}
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_integer_multi_bit_gpu_default
           path: ${{ env.RESULTS_FILENAME }}
@@ -173,7 +173,7 @@ jobs:
           REF_NAME: ${{ github.ref_name }}
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_core_crypto
           path: ${{ env.RESULTS_FILENAME }}

.github/workflows/benchmark_gpu_common.yml

@@ -28,6 +28,8 @@ on:
       precisions_set:
         type: string
         default: fast
+      additional_file_to_parse: # Other files to parse, located under tfhe-benchmark/ directory
+        type: string # Use comma separated values to generate an array
     secrets:
       REPO_CHECKOUT_TOKEN:
         required: true
@@ -109,7 +111,7 @@ jobs:
             ]:
               f.write(f"""{env_name}=["{'", "'.join(values_to_join)}"]\n""")
 
-      - name: Set martix arguments outputs
+      - name: Set matrix arguments outputs
         id: set_matrix_args
         run: | # zizmor: ignore[template-injection] these env variable are safe
           {
@@ -124,17 +126,11 @@ jobs:
     needs: prepare-matrix
     runs-on: ubuntu-latest
     outputs:
-      # Use permanent remote instance label first as on-demand remote instance label output is set before the end of start-remote-instance step.
-      # If the latter fails due to a failed GitHub action runner set up, we have to fallback on the permanent instance.
-      # Since the on-demand remote label is set before failure, we have to do the logical OR in this order,
-      # otherwise we'll try to run the next job on a non-existing on-demand instance.
-      runner-name: ${{ steps.use-permanent-instance.outputs.runner_group || steps.start-remote-instance.outputs.label }}
-      remote-instance-outcome: ${{ steps.start-remote-instance.outcome }}
+      runner-name: ${{ steps.start-instance.outputs.label }}
     steps:
-      - name: Start remote instance
-        id: start-remote-instance
-        continue-on-error: true
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+      - name: Start instance
+        id: start-instance
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -143,25 +139,6 @@ jobs:
           backend: ${{ inputs.backend }}
           profile: ${{ inputs.profile }}
 
-      - name: Acknowledge remote instance failure
-        if: steps.start-remote-instance.outcome == 'failure' &&
-          inputs.profile != 'single-h100'
-        run: |
-          echo "Remote instance instance has failed to start (profile provided: '${INPUTS_PROFILE}')"
-          echo "Permanent instance instance cannot be used as a substitute (profile needed: 'single-h100')"
-          exit 1
-        env:
-          INPUTS_PROFILE: ${{ inputs.profile }}
-
-      # This will allow to fallback on permanent instances running on Hyperstack.
-      - name: Use permanent remote instance
-        id: use-permanent-instance
-        if: env.SECRETS_AVAILABLE == 'true' &&
-          steps.start-remote-instance.outcome == 'failure' &&
-          inputs.profile == 'single-h100'
-        run: |
-          echo "runner_group=h100x1" >> "$GITHUB_OUTPUT"
-
   # Install dependencies only once since cuda-benchmarks uses a matrix strategy, thus running multiple times.
   install-dependencies:
     name: benchmark_gpu_common/install-dependencies
@@ -182,7 +159,6 @@ jobs:
           token: ${{ secrets.REPO_CHECKOUT_TOKEN }}
 
       - name: Setup Hyperstack dependencies
-        if: needs.setup-instance.outputs.remote-instance-outcome == 'success'
         uses: ./.github/actions/gpu_setup
         with:
           cuda-version: ${{ matrix.cuda }}
@@ -280,8 +256,21 @@ jobs:
           REF_NAME: ${{ github.ref_name }}
           BENCH_TYPE: ${{ matrix.bench_type }}
 
+      - name: Parse additional benchmarks results files
+        if: ${{ inputs.additional_file_to_parse }}
+        run: |
+          filenames_list="${filenames}"
+          IFS=','
+          for filename in $filenames_list; do
+            python3 ./ci/benchmark_parser.py "tfhe-benchmark/${filename}" "${RESULTS_FILENAME}" \
+            --object-size \
+            --append-results
+          done
+        env:
+          filenames: ${{ inputs.additional_file_to_parse }}
+
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_${{ matrix.command }}_${{ matrix.op_flavor }}_${{ inputs.profile }}_${{ matrix.bench_type }}_${{ matrix.params_type }}
           path: ${{ env.RESULTS_FILENAME }}
@@ -318,13 +307,13 @@ jobs:
 
   teardown-instance:
     name: benchmark_gpu_common/teardown-instance
-    if: ${{ always() && needs.setup-instance.outputs.remote-instance-outcome == 'success' }}
+    if: ${{ always() && needs.setup-instance.result == 'success' }}
     needs: [ setup-instance, cuda-benchmarks, slack-notify ]
     runs-on: ubuntu-latest
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/benchmark_gpu_coprocessor.yml

@@ -42,7 +42,7 @@ env:
   OPTIMIZATION_TARGET: "throughput"
   BATCH_SIZE: "5000"
   SCHEDULING_POLICY: "MAX_PARALLELISM"
-  BENCHMARKS: "erc20"
+  BENCHMARKS: "erc7984"
   BRANCH_NAME: ${{ github.ref_name }}
   COMMIT_SHA: ${{ github.sha }}
   SLAB_SECRET: ${{ secrets.JOB_SECRET }}
@@ -77,7 +77,7 @@ jobs:
           if [[ ${IS_MANUAL_RUN} == true ]]; then
             PROFILE_RAW="${PROFILE_MANUAL_RUN}"
           else
-            PROFILE_RAW="${PROFILE}"
+            PROFILE_RAW="${PROFILE_SCHEDULED_RUN}"
           fi
           # shellcheck disable=SC2001
           PROFILE_VAL=$(echo "${PROFILE_RAW}" | sed 's|.*[[:space:]](\(.*\))|\1|')
@@ -94,7 +94,7 @@ jobs:
     steps:
       - name: Start remote instance
         id: start-remote-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -126,7 +126,14 @@ jobs:
     steps:
       - name: Install git LFS
         run: |
-          sudo apt-get remove -y unattended-upgrades
+          # Disable unattended-upgrades to avoid lock issues
+          sudo systemctl mask --now unattended-upgrades
+          sudo systemctl stop --now unattended-upgrades
+
+          sudo apt-get clean
+          sudo rm -rf /var/lib/apt/lists/*
+          sudo apt purge -y unattended-upgrades
+
           sudo apt-get update
           sudo apt-get install -y git-lfs protobuf-compiler
           git lfs install
@@ -197,7 +204,7 @@ jobs:
         uses: foundry-rs/foundry-toolchain@8789b3e21e6c11b2697f5eb56eddae542f746c10
 
       - name: Cache cargo
-        uses: actions/cache@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 # v5.0.3
+        uses: actions/cache@668228422ae6a00e4ad889ee87cd7109ec5666a7 # v5.0.4
         with:
           path: |
             ~/.cargo/registry
@@ -207,14 +214,14 @@ jobs:
           restore-keys: ${{ runner.os }}-cargo-
 
       - name: Login to GitHub Container Registry
-        uses: docker/login-action@c94ce9fb468520275223c153574b00df6fe4bcc9 # v3.7.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           registry: ghcr.io
           username: ${{ github.actor }}
           password: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Login to Chainguard Registry
-        uses: docker/login-action@c94ce9fb468520275223c153574b00df6fe4bcc9 # v3.7.0
+        uses: docker/login-action@4907a6ddec9925e35a0a9e82d7399ccc52663121 # v4.1.0
         with:
           registry: cgr.dev
           username: ${{ secrets.CGR_USERNAME }}
@@ -225,7 +232,7 @@ jobs:
         working-directory: fhevm/coprocessor/fhevm-engine/tfhe-worker
 
       - name: Use Node.js
-        uses: actions/setup-node@6044e13b5dc448c55e2357c09f80417699197238 # v6.2.0
+        uses: actions/setup-node@53b83947a5a98c8d113130e565377fae1a50d02f # v6.3.0
         with:
           node-version: 20.x
 
@@ -241,13 +248,13 @@ jobs:
           npm install && npm run deploy:emptyProxies && npx hardhat compile
         working-directory: fhevm/
 
-      - name: Profile erc20 no-cmux benchmark on GPU
+      - name: Profile erc7984 no-cmux benchmark on GPU
         run: |
           BENCHMARK_BATCH_SIZE="${BATCH_SIZE}" \
           FHEVM_DF_SCHEDULE="${SCHEDULING_POLICY}" \
           BENCHMARK_TYPE="THROUGHPUT_200" \
           OPTIMIZATION_TARGET="${OPTIMIZATION_TARGET}" \
-          make -e "profile_erc20_gpu"
+          make -e "profile_erc7984_gpu"
         working-directory: fhevm/coprocessor/fhevm-engine/tfhe-worker
 
       - name: Get nsys profile name
@@ -264,7 +271,7 @@ jobs:
       - name: Upload profile artifact
         env:
           REPORT_NAME: ${{ steps.nsys_profile_name.outputs.profile }}
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ env.REPORT_NAME }}
           path: fhevm/coprocessor/fhevm-engine/tfhe-worker/${{ env.REPORT_NAME }}
@@ -295,7 +302,7 @@ jobs:
         working-directory: fhevm/
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${COMMIT_SHA}_${BENCHMARKS}_${{ needs.parse-inputs.outputs.profile }}
           path: fhevm/$${{ env.RESULTS_FILENAME }}
@@ -326,7 +333,7 @@ jobs:
     steps:
       - name: Stop remote instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/benchmark_hpu.yml

@@ -14,7 +14,7 @@ on:
           - integer
           - hlapi_unsigned
           - hlapi_signed
-          - hlapi_erc20
+          - hlapi_erc7984
       op_flavor:
         description: "Operations set to run"
         type: choice

.github/workflows/benchmark_hpu_common.yml

@@ -95,7 +95,7 @@ jobs:
             ]:
               f.write(f"""{env_name}=["{'", "'.join(values_to_join)}"]\n""")
 
-      - name: Set martix arguments outputs
+      - name: Set matrix arguments outputs
         id: set_matrix_args
         run: | # zizmor: ignore[template-injection] these env variable are safe
           {
@@ -121,7 +121,7 @@ jobs:
     steps:
       # Needed as long as hw_regmap repository is private
       - name: Configure SSH
-        uses: webfactory/ssh-agent@a6f90b1f127823b31d4d4a8d96047790581349bd # v0.9.1
+        uses: webfactory/ssh-agent@e83874834305fe9a4a2997156cb26c5de65a8555 # v0.10.0
         with:
           ssh-private-key: ${{ secrets.SSH_PRIVATE_KEY }}
 
@@ -185,7 +185,7 @@ jobs:
           BENCH_TYPE: ${{ matrix.bench_type }}
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_${{ matrix.bench_type }}_${{ matrix.command }}_benchmarks
           path: ${{ env.RESULTS_FILENAME }}

.github/workflows/benchmark_perf_regression.yml

@@ -143,7 +143,7 @@ jobs:
     steps:
       - name: Start instance
         id: start-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -280,7 +280,7 @@ jobs:
           BENCH_TYPE: ${{ env.__TFHE_RS_BENCH_TYPE }}
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_regression_${{ env.RESULTS_FILE_SHA }} # RESULT_FILE_SHA is needed to avoid collision between matrix.command runs
           path: ${{ env.RESULTS_FILENAME }}
@@ -314,11 +314,15 @@ jobs:
         uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405 # v6.2.0
         with:
           python-version: '3.12'
-          pip-install: -r ci/data_extractor/requirements.txt -r ci/perf_regression/requirements.txt
+
+      - name: Install requirements
+        run: |
+          python3.12 -m venv venv
+          venv/bin/pip3 install -r ci/data_extractor/requirements.txt -r ci/perf_regression/requirements.txt
 
       - name: Fetch data
         run: |
-          python3 ci/data_extractor/src/data_extractor.py regression_data \
+          venv/bin/python3 ci/data_extractor/src/data_extractor.py regression_data \
           --generate-regression-json \
           --regression-profiles ci/regression.toml \
           --regression-selected-profile "${REGRESSION_PROFILE}" \
@@ -336,7 +340,7 @@ jobs:
 
       - name: Generate regression report
         run: |
-          python3 ci/perf_regression/perf_regression.py check_regression \
+          venv/bin/python3 ci/perf_regression/perf_regression.py check_regression \
           --results-file regression_data.json \
           --generate-report
 
@@ -383,7 +387,7 @@ jobs:
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/benchmark_tfhe_fft.yml

@@ -40,7 +40,7 @@ jobs:
     steps:
       - name: Start instance
         id: start-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -99,7 +99,7 @@ jobs:
           REF_NAME: ${{ github.ref_name }}
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_fft
           path: ${{ env.RESULTS_FILENAME }}
@@ -137,7 +137,7 @@ jobs:
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/benchmark_tfhe_ntt.yml

@@ -40,7 +40,7 @@ jobs:
     steps:
       - name: Start instance
         id: start-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -99,7 +99,7 @@ jobs:
           REF_NAME: ${{ github.ref_name }}
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_ntt
           path: ${{ env.RESULTS_FILENAME }}
@@ -137,7 +137,7 @@ jobs:
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/benchmark_wasm_client.yml

@@ -46,7 +46,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             wasm_bench:

.github/workflows/benchmark_wasm_client_common.yml

@@ -63,7 +63,7 @@ jobs:
           with open(env_file, "a") as f:
             f.write(f"""BROWSER=["{'", "'.join(split_browser)}"]\n""")
 
-      - name: Set martix arguments output
+      - name: Set matrix arguments output
         id: set_matrix_arg
         run: | # zizmor: ignore[template-injection] this env variable is safe
           echo "browser=${{ toJSON(env.BROWSER) }}" >> "${GITHUB_OUTPUT}"
@@ -77,7 +77,7 @@ jobs:
     steps:
       - name: Start instance
         id: start-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -124,7 +124,7 @@ jobs:
 
       - name: Node cache restoration
         id: node-cache
-        uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/restore@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         with:
           path: |
             ~/.nvm
@@ -137,7 +137,7 @@ jobs:
           make install_node
 
       - name: Node cache save
-        uses: actions/cache/save@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/save@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         if: steps.node-cache.outputs.cache-hit != 'true'
         with:
           path: |
@@ -158,9 +158,9 @@ jobs:
         env:
           BROWSER: ${{ matrix.browser }}
 
-      - name: Run benchmarks (unsafe coop)
+      - name: Run benchmarks (cross origin)
         run: |
-          make bench_web_js_api_unsafe_coop_"${BROWSER}"_ci
+          make bench_web_js_api_cross_origin_"${BROWSER}"_ci
         env:
           BROWSER: ${{ matrix.browser }}
 
@@ -180,7 +180,7 @@ jobs:
           REF_NAME: ${{ github.ref_name }}
 
       - name: Upload parsed results artifact
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_wasm_${{ matrix.browser }}
           path: ${{ env.RESULTS_FILENAME }}
@@ -218,7 +218,7 @@ jobs:
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/cargo_build_common.yml

@@ -94,7 +94,7 @@ jobs:
           with open(env_file, "a") as f:
             f.write(f"""RUNNERS=["{'", "'.join(runners)}"]\n""")
 
-      - name: Set martix runners outputs
+      - name: Set matrix runners outputs
         id: set_matrix_runners
         run: | # zizmor: ignore[template-injection] these env variable are safe
           echo "runners=${{ toJSON(env.RUNNERS) }}" >> "${GITHUB_OUTPUT}"
@@ -138,7 +138,7 @@ jobs:
       - name: Node cache restoration
         if: inputs.run-pcc-cpu-batch == 'pcc_batch_2'
         id: node-cache
-        uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/restore@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         with:
           path: |
             ~/.nvm
@@ -151,7 +151,7 @@ jobs:
           make install_node
 
       - name: Node cache save
-        uses: actions/cache/save@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/save@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         if: inputs.run-pcc-cpu-batch == 'pcc_batch_2' && steps.node-cache.outputs.cache-hit != 'true'
         with:
           path: |

.github/workflows/cargo_test_fft.yml

@@ -40,7 +40,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             fft:

.github/workflows/cargo_test_ntt.yml

@@ -42,7 +42,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             ntt:
@@ -63,7 +63,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -146,7 +146,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/ci_lint.yml

@@ -43,14 +43,14 @@ jobs:
           echo "version=$(make zizmor_version)" >> "${GITHUB_OUTPUT}"
 
       - name: Check workflows security
-        uses: zizmorcore/zizmor-action@0dce2577a4760a2749d8cfb7a84b7d5585ebcb7d # v0.5.0
+        uses: zizmorcore/zizmor-action@71321a20a9ded102f6e9ce5718a2fcec2c4f70d8 # v0.5.2
         with:
           advanced-security: 'false' # Print results directly in logs
           persona: pedantic
           version: ${{ steps.get_zizmor.outputs.version }}
 
       - name: Ensure SHA pinned actions
-        uses: zgosalvez/github-actions-ensure-sha-pinned-actions@d5d20e15f2736816ee0e001ba8b24b54d9ffcff4 # v5.0.0
+        uses: zgosalvez/github-actions-ensure-sha-pinned-actions@ca46236c6ce584ae24bc6283ba8dcf4b3ec8a066 # v5.0.4
         with:
           allowlist: |
             slsa-framework/slsa-github-generator

.github/workflows/code_coverage.yml

@@ -44,7 +44,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             tfhe:
@@ -74,7 +74,7 @@ jobs:
           make test_shortint_cov
 
       - name: Upload tfhe coverage to Codecov
-        uses: codecov/codecov-action@671740ac38dd9b0130fbe1cec585b89eea48d3de
+        uses: codecov/codecov-action@57e3a136b779b570ffcdbf80b3bdc90e7fab3de2
         if: steps.changed-files.outputs.tfhe_any_changed == 'true'
         with:
           token: ${{ secrets.CODECOV_TOKEN }}
@@ -88,7 +88,7 @@ jobs:
           make test_integer_cov
 
       - name: Upload tfhe coverage to Codecov
-        uses: codecov/codecov-action@671740ac38dd9b0130fbe1cec585b89eea48d3de
+        uses: codecov/codecov-action@57e3a136b779b570ffcdbf80b3bdc90e7fab3de2
         if: steps.changed-files.outputs.tfhe_any_changed == 'true'
         with:
           token: ${{ secrets.CODECOV_TOKEN }}

.github/workflows/csprng_randomness_tests.yml

@@ -46,7 +46,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             csprng:

.github/workflows/generate_svg_common.yml

@@ -87,7 +87,7 @@ jobs:
 
       - name: Upload tables
         if: inputs.backend_comparison == false
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_${{ inputs.backend }}_${{ inputs.layer }}_subset_${{inputs.bench_subset}}_${{ inputs.pbs_kind }}_${{ inputs.bench_type }}_tables
           # This will upload all the file generated
@@ -111,7 +111,7 @@ jobs:
 
       - name: Upload comparison tables
         if: inputs.backend_comparison == true
-        uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f
+        uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f
         with:
           name: ${{ github.sha }}_backends_comparison_tables
           # This will upload all the file generated

.github/workflows/generate_svgs.yml

@@ -209,60 +209,98 @@ jobs:
       DATA_EXTRACTOR_DATABASE_HOST: ${{ secrets.DATA_EXTRACTOR_DATABASE_HOST }}
       DATA_EXTRACTOR_DATABASE_PASSWORD: ${{ secrets.DATA_EXTRACTOR_DATABASE_PASSWORD }}
 
+  gpu-zk-server-latency-table:
+    name: generate_documentation_svgs/gpu-zk-server-latency-table
+    uses: ./.github/workflows/generate_svg_common.yml
+    if: inputs.generate-gpu-svgs
+    with:
+      backend: gpu
+      hardware_name: n3-H100-SXM5x8
+      layer: integer
+      bench_subset: zk
+      pbs_kind: multi_bit
+      grouping_factor: 4
+      bench_type: latency
+      time_span_days: ${{ inputs.time_span_days }}
+      output_filename: gpu-zk-benchmark-latency
+    secrets:
+      DATA_EXTRACTOR_DATABASE_USER: ${{ secrets.DATA_EXTRACTOR_DATABASE_USER }}
+      DATA_EXTRACTOR_DATABASE_HOST: ${{ secrets.DATA_EXTRACTOR_DATABASE_HOST }}
+      DATA_EXTRACTOR_DATABASE_PASSWORD: ${{ secrets.DATA_EXTRACTOR_DATABASE_PASSWORD }}
+
+  gpu-zk-server-throughput-table:
+    name: generate_documentation_svgs/gpu-zk-server-throughput-table
+    uses: ./.github/workflows/generate_svg_common.yml
+    if: inputs.generate-gpu-svgs
+    with:
+      backend: gpu
+      hardware_name: n3-H100-SXM5x8
+      layer: integer
+      bench_subset: zk
+      pbs_kind: multi_bit
+      grouping_factor: 4
+      bench_type: throughput
+      time_span_days: ${{ inputs.time_span_days }}
+      output_filename: gpu-zk-benchmark-throughput
+    secrets:
+      DATA_EXTRACTOR_DATABASE_USER: ${{ secrets.DATA_EXTRACTOR_DATABASE_USER }}
+      DATA_EXTRACTOR_DATABASE_HOST: ${{ secrets.DATA_EXTRACTOR_DATABASE_HOST }}
+      DATA_EXTRACTOR_DATABASE_PASSWORD: ${{ secrets.DATA_EXTRACTOR_DATABASE_PASSWORD }}
+
   # -----------------------------------------------------------
-  # ERC20 benchmarks tables
+  # ERC7984 benchmarks tables
   # -----------------------------------------------------------
 
-  cpu-erc20-latency-throughput-table:
-    name: generate_documentation_svgs/cpu-erc20-latency-throughput-table
+  cpu-erc7984-latency-throughput-table:
+    name: generate_documentation_svgs/cpu-erc7984-latency-throughput-table
     uses: ./.github/workflows/generate_svg_common.yml
     if: inputs.generate-cpu-svgs
     with:
       backend: cpu
       hardware_name: hpc7a.96xlarge
       layer: hlapi
-      bench_subset: erc20
+      bench_subset: erc7984
       pbs_kind: classical
       bench_type: both
       time_span_days: ${{ inputs.time_span_days }}
-      output_filename: cpu-hlapi-erc20-benchmark-latency-throughput
+      output_filename: cpu-hlapi-erc7984-benchmark-latency-throughput
     secrets:
       DATA_EXTRACTOR_DATABASE_USER: ${{ secrets.DATA_EXTRACTOR_DATABASE_USER }}
       DATA_EXTRACTOR_DATABASE_HOST: ${{ secrets.DATA_EXTRACTOR_DATABASE_HOST }}
       DATA_EXTRACTOR_DATABASE_PASSWORD: ${{ secrets.DATA_EXTRACTOR_DATABASE_PASSWORD }}
 
-  gpu-erc20-latency-throughput-table:
-    name: generate_documentation_svgs/gpu-erc20-latency-throughput-table
+  gpu-erc7984-latency-throughput-table:
+    name: generate_documentation_svgs/gpu-erc7984-latency-throughput-table
     uses: ./.github/workflows/generate_svg_common.yml
     if: inputs.generate-gpu-svgs
     with:
       backend: gpu
       hardware_name: n3-H100-SXM5x8
       layer: hlapi
-      bench_subset: erc20
+      bench_subset: erc7984
       pbs_kind: multi_bit
       grouping_factor: 4
       bench_type: both
       time_span_days: ${{ inputs.time_span_days }}
-      output_filename: gpu-hlapi-erc20-benchmark-h100x8-sxm5-latency-throughput
+      output_filename: gpu-hlapi-erc7984-benchmark-h100x8-sxm5-latency-throughput
     secrets:
       DATA_EXTRACTOR_DATABASE_USER: ${{ secrets.DATA_EXTRACTOR_DATABASE_USER }}
       DATA_EXTRACTOR_DATABASE_HOST: ${{ secrets.DATA_EXTRACTOR_DATABASE_HOST }}
       DATA_EXTRACTOR_DATABASE_PASSWORD: ${{ secrets.DATA_EXTRACTOR_DATABASE_PASSWORD }}
 
-  hpu-erc20-latency-throughput-table:
-    name: generate_documentation_svgs/hpu-erc20-latency-throughput-table
+  hpu-erc7984-latency-throughput-table:
+    name: generate_documentation_svgs/hpu-erc7984-latency-throughput-table
     uses: ./.github/workflows/generate_svg_common.yml
     if: inputs.generate-hpu-svgs
     with:
       backend: hpu
       hardware_name: hpu_x1
       layer: hlapi
-      bench_subset: erc20
+      bench_subset: erc7984
       pbs_kind: classical
       bench_type: both
       time_span_days: ${{ inputs.time_span_days }}
-      output_filename: hpu-hlapi-erc20-benchmark-hpux1-latency-throughput.svg
+      output_filename: hpu-hlapi-erc7984-benchmark-hpux1-latency-throughput.svg
     secrets:
       DATA_EXTRACTOR_DATABASE_USER: ${{ secrets.DATA_EXTRACTOR_DATABASE_USER }}
       DATA_EXTRACTOR_DATABASE_HOST: ${{ secrets.DATA_EXTRACTOR_DATABASE_HOST }}

.github/workflows/gpu_code_validation_tests.yml

@@ -43,7 +43,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -94,11 +94,14 @@ jobs:
       - name: Find tools
         run: |
           # Disable unattended-upgrades to avoid lock issues
-          sudo systemctl disable --now unattended-upgrades
+          sudo systemctl mask --now unattended-upgrades
+          sudo systemctl stop --now unattended-upgrades
 
           sudo apt-get clean
           sudo rm -rf /var/lib/apt/lists/*
-          sudo apt update && sudo apt install -y valgrind 
+          sudo apt purge -y unattended-upgrades
+
+          sudo apt update && sudo apt install -y valgrind
           find /usr -executable -name "compute-sanitizer"
           which valgrind
 
@@ -146,7 +149,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_core_h100_tests.yml

@@ -23,7 +23,7 @@ on:
   # Allows you to run this workflow manually from the Actions tab as an alternative.
   workflow_dispatch:
   pull_request:
-    types: [ labeled ]
+    types: [ labeled, opened, synchronize ]
 
 permissions:
   contents: read
@@ -38,6 +38,7 @@ jobs:
       pull-requests: read  # Needed to check for file change
     outputs:
       gpu_test: ${{ env.IS_PULL_REQUEST == 'false' || steps.changed-files.outputs.gpu_any_changed }}
+      core_crypto_changed: ${{ steps.changed-files.outputs.core_crypto_any_changed }}
     steps:
       - name: Checkout tfhe-rs
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
@@ -48,7 +49,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -62,29 +63,24 @@ jobs:
               - tfhe/src/integer/server_key/radix_parallel/tests_cases_unsigned.rs
               - tfhe/src/shortint/parameters/**
               - tfhe/src/c_api/**
-              - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_core_h100_tests.yml'
+            core_crypto:
+              - tfhe/src/core_crypto/gpu/**
 
   setup-instance:
     name: gpu_core_h100_tests/setup-instance
     needs: should-run
     if: github.event_name != 'pull_request' ||
-      (github.event.action != 'labeled' && needs.should-run.outputs.gpu_test == 'true') ||
-      (github.event.action == 'labeled' && github.event.label.name == 'approved' && needs.should-run.outputs.gpu_test == 'true')
+      (github.event.action == 'labeled' && github.event.label.name == 'approved' && needs.should-run.outputs.gpu_test == 'true') ||
+      (github.event.action != 'labeled' && needs.should-run.outputs.core_crypto_changed == 'true')
     runs-on: ubuntu-latest
     outputs:
-      # Use permanent remote instance label first as on-demand remote instance label output is set before the end of start-remote-instance step.
-      # If the latter fails due to a failed GitHub action runner set up, we have to fallback on the permanent instance.
-      # Since the on-demand remote label is set before failure, we have to do the logical OR in this order,
-      # otherwise we'll try to run the next job on a non-existing on-demand instance.
-      runner-name: ${{ steps.use-permanent-instance.outputs.runner_group || steps.start-remote-instance.outputs.label || steps.start-github-instance.outputs.runner_group }}
-      remote-instance-outcome: ${{ steps.start-remote-instance.outcome }}
+      runner-name: ${{ steps.start-remote-instance.outputs.label || steps.start-github-instance.outputs.runner_group }}
     steps:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        continue-on-error: true
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -93,13 +89,6 @@ jobs:
           backend: hyperstack
           profile: single-h100
 
-      # This will allow to fallback on permanent instances running on Hyperstack.
-      - name: Use permanent remote instance
-        id: use-permanent-instance
-        if: env.SECRETS_AVAILABLE == 'true' && steps.start-remote-instance.outcome == 'failure'
-        run: |
-          echo "runner_group=h100x1" >> "$GITHUB_OUTPUT"
-
       # This instance will be spawned especially for pull-request from forked repository
       - name: Start GitHub instance
         id: start-github-instance
@@ -132,7 +121,6 @@ jobs:
           token: ${{ env.CHECKOUT_TOKEN }}
 
       - name: Setup Hyperstack dependencies
-        if: needs.setup-instance.outputs.remote-instance-outcome == 'success'
         uses: ./.github/actions/gpu_setup
         with:
           cuda-version: ${{ matrix.cuda }}
@@ -176,14 +164,14 @@ jobs:
 
   teardown-instance:
     name: gpu_core_h100_tests/teardown-instance
-    if: ${{ always() && needs.setup-instance.outputs.remote-instance-outcome == 'success' }}
+    if: ${{ always() && needs.setup-instance.result == 'success' }}
     needs: [ setup-instance, cuda-tests-linux ]
     runs-on: ubuntu-latest
     steps:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_fast_tests.yml

@@ -47,7 +47,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -77,7 +77,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -182,7 +182,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_full_h100_tests.yml

@@ -25,17 +25,11 @@ jobs:
     name: gpu_full_h100_tests/setup-instance
     runs-on: ubuntu-latest
     outputs:
-      # Use permanent remote instance label first as on-demand remote instance label output is set before the end of start-remote-instance step.
-      # If the latter fails due to a failed GitHub action runner set up, we have to fallback on the permanent instance.
-      # Since the on-demand remote label is set before failure, we have to do the logical OR in this order,
-      # otherwise we'll try to run the next job on a non-existing on-demand instance.
-      runner-name: ${{ steps.use-permanent-instance.outputs.runner_group || steps.start-remote-instance.outputs.label }}
-      remote-instance-outcome: ${{ steps.start-remote-instance.outcome }}
+      runner-name: ${{ steps.start-instance.outputs.label }}
     steps:
-      - name: Start remote instance
-        id: start-remote-instance
-        continue-on-error: true
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+      - name: Start instance
+        id: start-instance
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -44,13 +38,6 @@ jobs:
           backend: hyperstack
           profile: single-h100
 
-      # This will allow to fallback on permanent instances running on Hyperstack.
-      - name: Use permanent remote instance
-        id: use-permanent-instance
-        if: env.SECRETS_AVAILABLE == 'true' && steps.start-remote-instance.outcome == 'failure'
-        run: |
-          echo "runner_group=h100x1" >> "$GITHUB_OUTPUT"
-
   cuda-tests-linux:
     name: gpu_full_h100_tests/cuda-tests-linux
     needs: [ setup-instance ]
@@ -74,7 +61,6 @@ jobs:
           token: ${{ secrets.REPO_CHECKOUT_TOKEN }}
 
       - name: Setup Hyperstack dependencies
-        if: needs.setup-instance.outputs.remote-instance-outcome == 'success'
         uses: ./.github/actions/gpu_setup
         with:
           cuda-version: ${{ matrix.cuda }}
@@ -118,13 +104,13 @@ jobs:
 
   teardown-instance:
     name: gpu_full_h100_tests/teardown-instance
-    if: ${{ always() && needs.setup-instance.outputs.remote-instance-outcome == 'success' }}
+    if: ${{ always() && needs.setup-instance.result == 'success' }}
     needs: [ setup-instance, cuda-tests-linux ]
     runs-on: ubuntu-latest
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_full_multi_gpu_tests.yml

@@ -48,7 +48,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -80,7 +80,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -186,7 +186,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_hlapi_h100_tests.yml

@@ -23,7 +23,7 @@ on:
   # Allows you to run this workflow manually from the Actions tab as an alternative.
   workflow_dispatch:
   pull_request:
-    types: [ labeled ]
+    types: [ labeled, opened, synchronize ]
 
 permissions:
   contents: read
@@ -38,6 +38,7 @@ jobs:
       pull-requests: read  # Needed to check for file change
     outputs:
       gpu_test: ${{ env.IS_PULL_REQUEST == 'false' || steps.changed-files.outputs.gpu_any_changed }}
+      core_crypto_changed: ${{ steps.changed-files.outputs.core_crypto_any_changed }}
     steps:
       - name: Checkout tfhe-rs
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
@@ -48,7 +49,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -65,27 +66,23 @@ jobs:
               - tfhe/src/c_api/**
               - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_hlapi_h100_tests.yml'
+            core_crypto:
+              - tfhe/src/core_crypto/gpu/**
 
   setup-instance:
     name: gpu_hlapi_h100_tests/setup-instance
     needs: should-run
     if: github.event_name != 'pull_request' ||
-      (github.event.action != 'labeled' && needs.should-run.outputs.gpu_test == 'true') ||
-      (github.event.action == 'labeled' && github.event.label.name == 'approved' && needs.should-run.outputs.gpu_test == 'true')
+      (github.event.action == 'labeled' && github.event.label.name == 'approved' && needs.should-run.outputs.gpu_test == 'true') ||
+      (github.event.action != 'labeled' && needs.should-run.outputs.core_crypto_changed == 'true')
     runs-on: ubuntu-latest
     outputs:
-      # Use permanent remote instance label first as on-demand remote instance label output is set before the end of start-remote-instance step.
-      # If the latter fails due to a failed GitHub action runner set up, we have to fallback on the permanent instance.
-      # Since the on-demand remote label is set before failure, we have to do the logical OR in this order,
-      # otherwise we'll try to run the next job on a non-existing on-demand instance.
-      runner-name: ${{ steps.use-permanent-instance.outputs.runner_group || steps.start-remote-instance.outputs.label || steps.start-github-instance.outputs.runner_group }}
-      remote-instance-outcome: ${{ steps.start-remote-instance.outcome }}
+      runner-name: ${{ steps.start-remote-instance.outputs.label || steps.start-github-instance.outputs.runner_group }}
     steps:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        continue-on-error: true
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -94,13 +91,6 @@ jobs:
           backend: hyperstack
           profile: single-h100
 
-      # This will allow to fallback on permanent instances running on Hyperstack.
-      - name: Use permanent remote instance
-        id: use-permanent-instance
-        if: env.SECRETS_AVAILABLE == 'true' && steps.start-remote-instance.outcome == 'failure'
-        run: |
-          echo "runner_group=h100x1" >> "$GITHUB_OUTPUT"
-
       # This instance will be spawned especially for pull-request from forked repository
       - name: Start GitHub instance
         id: start-github-instance
@@ -133,7 +123,6 @@ jobs:
           token: ${{ env.CHECKOUT_TOKEN }}
 
       - name: Setup Hyperstack dependencies
-        if: needs.setup-instance.outputs.remote-instance-outcome == 'success'
         uses: ./.github/actions/gpu_setup
         with:
           cuda-version: ${{ matrix.cuda }}
@@ -184,14 +173,14 @@ jobs:
 
   teardown-instance:
     name: gpu_hlapi_h100_tests/teardown-instance
-    if: ${{ always() && needs.setup-instance.outputs.remote-instance-outcome == 'success' }}
+    if: ${{ always() && needs.setup-instance.result == 'success' }}
     needs: [ setup-instance, cuda-tests-linux ]
     runs-on: ubuntu-latest
     steps:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_integer_long_run_tests.yml

@@ -17,8 +17,8 @@ on:
   # Allows you to run this workflow manually from the Actions tab as an alternative.
   workflow_dispatch:
   schedule:
-    # Nightly tests will be triggered each evening 8p.m.
-    - cron: "0 20 * * *"
+    # Weekly tests will be triggered every Monday at 8p.m.
+    - cron: "0 20 * * 1"
   pull_request:
 
 
@@ -28,17 +28,48 @@ permissions:
 # zizmor: ignore[concurrency-limits] concurrency is managed after instance setup to ensure safe provisioning
 
 jobs:
+  should-run:
+    name: gpu_integer_long_run_tests/should-run
+    runs-on: ubuntu-latest
+    permissions:
+      pull-requests: read  # Needed to check for file change
+    outputs:
+      is_needed_in_gpu_ci: ${{ env.IS_PR == 'false' || steps.changed-files.outputs.gpu_any_changed }}
+    steps:
+      - name: Checkout tfhe-rs
+        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
+        with:
+          fetch-depth: 0
+          persist-credentials: 'false'
+          token: ${{ env.CHECKOUT_TOKEN }}
+
+      - name: Check for file changes
+        id: changed-files
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
+        with:
+          files_yaml: |
+            gpu:
+              - tfhe/Cargo.toml
+              - tfhe/build.rs
+              - backends/tfhe-cuda-backend/**
+              - tfhe/src/core_crypto/gpu/**
+              - tfhe/src/integer/gpu/**
+              - tfhe/src/shortint/parameters/**
+              - '.github/workflows/gpu_integer_long_run_tests.yml'
+
   setup-instance:
     name: gpu_integer_long_run_tests/setup-instance
-    if: github.event_name != 'schedule' ||
-      (github.event_name == 'schedule' && github.repository == 'zama-ai/tfhe-rs')
+    needs: [should-run]
+    if: github.event_name == 'workflow_dispatch' ||
+      (github.event_name == 'schedule' && github.repository == 'zama-ai/tfhe-rs') ||
+      needs.should-run.outputs.is_needed_in_gpu_ci == 'true'
     runs-on: ubuntu-latest
     outputs:
       runner-name: ${{ steps.start-instance.outputs.label }}
     steps:
       - name: Start instance
         id: start-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -112,7 +143,7 @@ jobs:
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_memory_sanitizer.yml

@@ -48,7 +48,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -74,7 +74,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -166,7 +166,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_memory_sanitizer_h100.yml

@@ -48,7 +48,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -74,7 +74,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -166,7 +166,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_pcc.yml

@@ -38,7 +38,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -92,12 +92,15 @@ jobs:
           sudo dpkg -i "${CUDA_KEYRING_PACKAGE}"
 
           # Disable unattended-upgrades to avoid lock issues
-          sudo systemctl disable --now unattended-upgrades
+          sudo systemctl mask --now unattended-upgrades
+          sudo systemctl stop --now unattended-upgrades
 
           sudo apt-get clean
           sudo rm -rf /var/lib/apt/lists/*
+          sudo apt purge -y unattended-upgrades
+
           sudo apt update
-          sudo apt -y install "cuda-toolkit-${TOOLKIT_VERSION}" cmake-format
+          sudo apt -y install "cuda-toolkit-${TOOLKIT_VERSION}" cmake-format python3-venv
         env:
           CUDA_VERSION: ${{ matrix.cuda }}
 
@@ -128,6 +131,10 @@ jobs:
         env:
           GCC_VERSION: ${{ matrix.gcc }}
 
+      - name: Run semgrep and lint checks on CUDA code
+        run: |
+          make semgrep_and_lint_gpu_code
+
       - name: Run fmt checks
         run: |
           make check_fmt_gpu
@@ -136,16 +143,9 @@ jobs:
         run: |
           make pcc_gpu
 
-      - name: Run semgrep and lint checks on CUDA code
+      - name: Run semver checks on tfhe-cuda-backend
         run: |
-          # Disable unattended-upgrades to avoid lock issues
-          sudo systemctl disable --now unattended-upgrades
-
-          sudo apt-get clean
-          sudo rm -rf /var/lib/apt/lists/*
-          sudo apt update
-          sudo apt -y install python3-venv
-          make semgrep_and_lint_gpu_code
+          make semver_check_cuda_backend
 
       - name: Check build with hpu enabled
         run: |
@@ -176,7 +176,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_signed_integer_classic_tests.yml

@@ -48,7 +48,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -63,7 +63,6 @@ jobs:
               - tfhe/src/shortint/parameters/**
               - tfhe/src/high_level_api/**
               - tfhe/src/c_api/**
-              - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_signed_integer_classic_tests.yml'
               - scripts/integer-tests.sh
 
@@ -80,7 +79,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -169,7 +168,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_signed_integer_h100_tests.yml

@@ -23,7 +23,7 @@ on:
   # Allows you to run this workflow manually from the Actions tab as an alternative.
   workflow_dispatch:
   pull_request:
-    types: [ labeled ]
+    types: [ labeled, opened, synchronize ]
 
 permissions:
   contents: read
@@ -38,6 +38,7 @@ jobs:
       pull-requests: read  # Needed to check for file change
     outputs:
       gpu_test: ${{ env.IS_PULL_REQUEST == 'false' || steps.changed-files.outputs.gpu_any_changed }}
+      core_crypto_changed: ${{ steps.changed-files.outputs.core_crypto_any_changed }}
     steps:
       - name: Checkout tfhe-rs
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
@@ -48,7 +49,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -63,30 +64,25 @@ jobs:
               - tfhe/src/shortint/parameters/**
               - tfhe/src/high_level_api/**
               - tfhe/src/c_api/**
-              - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_signed_integer_h100_tests.yml'
               - scripts/integer-tests.sh
+            core_crypto:
+              - tfhe/src/core_crypto/gpu/**
 
   setup-instance:
     name: gpu_signed_integer_h100_tests/setup-instance
     needs: should-run
     if: github.event_name != 'pull_request' ||
-      (github.event.action != 'labeled' && needs.should-run.outputs.gpu_test == 'true') ||
-      (github.event.action == 'labeled' && github.event.label.name == 'approved' && needs.should-run.outputs.gpu_test == 'true')
+      (github.event.action == 'labeled' && github.event.label.name == 'approved' && needs.should-run.outputs.gpu_test == 'true') ||
+      (github.event.action != 'labeled' && needs.should-run.outputs.core_crypto_changed == 'true')
     runs-on: ubuntu-latest
     outputs:
-      # Use permanent remote instance label first as on-demand remote instance label output is set before the end of start-remote-instance step.
-      # If the latter fails due to a failed GitHub action runner set up, we have to fallback on the permanent instance.
-      # Since the on-demand remote label is set before failure, we have to do the logical OR in this order,
-      # otherwise we'll try to run the next job on a non-existing on-demand instance.
-      runner-name: ${{ steps.use-permanent-instance.outputs.runner_group || steps.start-remote-instance.outputs.label || steps.start-github-instance.outputs.runner_group }}
-      remote-instance-outcome: ${{ steps.start-remote-instance.outcome }}
+      runner-name: ${{ steps.start-remote-instance.outputs.label || steps.start-github-instance.outputs.runner_group }}
     steps:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        continue-on-error: true
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -95,13 +91,6 @@ jobs:
           backend: hyperstack
           profile: single-h100
 
-      # This will allow to fallback on permanent instances running on Hyperstack.
-      - name: Use permanent remote instance
-        id: use-permanent-instance
-        if: env.SECRETS_AVAILABLE == 'true' && steps.start-remote-instance.outcome == 'failure'
-        run: |
-          echo "runner_group=h100x1" >> "$GITHUB_OUTPUT"
-
       # This instance will be spawned especially for pull-request from forked repository
       - name: Start GitHub instance
         id: start-github-instance
@@ -134,7 +123,6 @@ jobs:
           token: ${{ env.CHECKOUT_TOKEN }}
 
       - name: Setup Hyperstack dependencies
-        if: needs.setup-instance.outputs.remote-instance-outcome == 'success'
         uses: ./.github/actions/gpu_setup
         with:
           cuda-version: ${{ matrix.cuda }}
@@ -176,14 +164,14 @@ jobs:
 
   teardown-instance:
     name: gpu_signed_integer_h100_tests/teardown-instance
-    if: ${{ always() && needs.setup-instance.outputs.remote-instance-outcome == 'success' }}
+    if: ${{ always() && needs.setup-instance.result == 'success' }}
     needs: [ setup-instance, cuda-tests-linux ]
     runs-on: ubuntu-latest
     steps:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_signed_integer_tests.yml

@@ -49,7 +49,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -64,7 +64,6 @@ jobs:
               - tfhe/src/shortint/parameters/**
               - tfhe/src/high_level_api/**
               - tfhe/src/c_api/**
-              - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_signed_integer_tests.yml'
               - scripts/integer-tests.sh
 
@@ -81,7 +80,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -178,7 +177,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_unsigned_integer_classic_tests.yml

@@ -48,7 +48,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -63,7 +63,6 @@ jobs:
               - tfhe/src/shortint/parameters/**
               - tfhe/src/high_level_api/**
               - tfhe/src/c_api/**
-              - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_unsigned_integer_classic_tests.yml'
               - scripts/integer-tests.sh
 
@@ -80,7 +79,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -169,7 +168,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_unsigned_integer_h100_tests.yml

@@ -23,7 +23,7 @@ on:
   # Allows you to run this workflow manually from the Actions tab as an alternative.
   workflow_dispatch:
   pull_request:
-    types: [ labeled ]
+    types: [ labeled, opened, synchronize ]
 
 permissions:
   contents: read
@@ -38,6 +38,7 @@ jobs:
       pull-requests: read  # Needed to check for file change
     outputs:
       gpu_test: ${{ env.IS_PULL_REQUEST == 'false' || steps.changed-files.outputs.gpu_any_changed }}
+      core_crypto_changed: ${{ steps.changed-files.outputs.core_crypto_any_changed }}
     steps:
       - name: Checkout tfhe-rs
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd
@@ -48,7 +49,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -63,30 +64,25 @@ jobs:
               - tfhe/src/shortint/parameters/**
               - tfhe/src/high_level_api/**
               - tfhe/src/c_api/**
-              - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_unsigned_integer_h100_tests.yml'
               - scripts/integer-tests.sh
+            core_crypto:
+              - tfhe/src/core_crypto/gpu/**
 
   setup-instance:
     name: gpu_unsigned_integer_h100_tests/setup-instance
     needs: should-run
     if: github.event_name == 'workflow_dispatch' ||
-      (github.event.action != 'labeled' && needs.should-run.outputs.gpu_test == 'true') ||
-      (github.event.action == 'labeled' && github.event.label.name == 'approved' && needs.should-run.outputs.gpu_test == 'true')
+      (github.event.action == 'labeled' && github.event.label.name == 'approved' && needs.should-run.outputs.gpu_test == 'true') ||
+      (github.event.action != 'labeled' && needs.should-run.outputs.core_crypto_changed == 'true')
     runs-on: ubuntu-latest
     outputs:
-      # Use permanent remote instance label first as on-demand remote instance label output is set before the end of start-remote-instance step.
-      # If the latter fails due to a failed GitHub action runner set up, we have to fallback on the permanent instance.
-      # Since the on-demand remote label is set before failure, we have to do the logical OR in this order,
-      # otherwise we'll try to run the next job on a non-existing on-demand instance.
-      runner-name: ${{ steps.use-permanent-instance.outputs.runner_group || steps.start-remote-instance.outputs.label || steps.start-github-instance.outputs.runner_group }}
-      remote-instance-outcome: ${{ steps.start-remote-instance.outcome }}
+      runner-name: ${{ steps.start-remote-instance.outputs.label || steps.start-github-instance.outputs.runner_group }}
     steps:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        continue-on-error: true
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -95,13 +91,6 @@ jobs:
           backend: hyperstack
           profile: single-h100
 
-      # This will allow to fallback on permanent instances running on Hyperstack.
-      - name: Use permanent remote instance
-        id: use-permanent-instance
-        if: env.SECRETS_AVAILABLE == 'true' && steps.start-remote-instance.outcome == 'failure'
-        run: |
-          echo "runner_group=h100x1" >> "$GITHUB_OUTPUT"
-
       # This instance will be spawned especially for pull-request from forked repository
       - name: Start GitHub instance
         id: start-github-instance
@@ -134,7 +123,6 @@ jobs:
           token: ${{ env.CHECKOUT_TOKEN }}
 
       - name: Setup Hyperstack dependencies
-        if: needs.setup-instance.outputs.remote-instance-outcome == 'success'
         uses: ./.github/actions/gpu_setup
         with:
           cuda-version: ${{ matrix.cuda }}
@@ -176,14 +164,14 @@ jobs:
 
   teardown-instance:
     name: gpu_unsigned_integer_h100_tests/teardown-instance
-    if: ${{ always() && needs.setup-instance.outputs.remote-instance-outcome == 'success' }}
+    if: ${{ always() && needs.setup-instance.result == 'success' }}
     needs: [ setup-instance, cuda-tests-linux ]
     runs-on: ubuntu-latest
     steps:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_unsigned_integer_tests.yml

@@ -49,7 +49,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
@@ -64,7 +64,6 @@ jobs:
               - tfhe/src/shortint/parameters/**
               - tfhe/src/high_level_api/**
               - tfhe/src/c_api/**
-              - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_unsigned_integer_tests.yml'
               - scripts/integer-tests.sh
 
@@ -81,7 +80,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -178,7 +177,7 @@ jobs:
       - name: Stop instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/gpu_zk_tests.yml

@@ -47,16 +47,17 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@24d32ffd492484c1d75e0c0b894501ddb9d30d62 # v47.0.0
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             gpu:
               - tfhe/Cargo.toml
               - tfhe/build.rs
+              - backends/tfhe-cuda-backend/**
               - backends/zk-cuda-backend/**
-              - tfhe/src/integer/gpu/zk/**
+              - tfhe/src/shortint/parameters/**
+              - tfhe/src/zk/**
               - tfhe-zk-pok/**
-              - 'tfhe/docs/**/**.md'
               - '.github/workflows/gpu_zk_tests.yml'
               - ci/slab.toml
 
@@ -72,7 +73,7 @@ jobs:
       - name: Start remote instance
         id: start-remote-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -131,7 +132,7 @@ jobs:
       - name: Run zk-cuda-backend integration tests
         run: |
           make test_zk_cuda_backend
-          make test_zk_pok_gpu
+          make test_zk_pok_experimental_gpu
           make test_integer_zk_gpu
           make test_integer_zk_experimental_gpu
 
@@ -166,7 +167,7 @@ jobs:
       - name: Stop remote instance
         id: stop-instance
         if: env.SECRETS_AVAILABLE == 'true'
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}

.github/workflows/hpu_hlapi_tests.yml

@@ -41,7 +41,7 @@ jobs:
 
       - name: Check for file changes
         id: changed-files
-        uses: tj-actions/changed-files@e0021407031f5be11a464abee9a0776171c79891 # v47.0.1
+        uses: tj-actions/changed-files@22103cc46bda19c2b464ffe86db46df6922fd323 # v47.0.5
         with:
           files_yaml: |
             hpu:

.github/workflows/make_release_common.yml

@@ -62,7 +62,7 @@ jobs:
           PACKAGE: ${{ inputs.package-name }}
         run: |
           cargo package -p "${PACKAGE}"
-      - uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
+      - uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
         with:
           name: crate-${{ inputs.package-name }}
           path: target/package/*.crate
@@ -76,7 +76,7 @@ jobs:
     if: ${{ !inputs.dry-run  }}
     needs: package
     # This action cannot be pinned to a specific commit (see https://github.com/slsa-framework/slsa-github-generator/blob/main/README.md#referencing-slsa-builders-and-generators)
-    uses: slsa-framework/slsa-github-generator/.github/workflows/generator_generic_slsa3.yml@v2.1.0
+    uses: slsa-framework/slsa-github-generator/.github/workflows/generator_generic_slsa3.yml@v2.1.0 # zizmor: ignore[unpinned-uses] as said above SLSA cannot be pinned by tag today
     permissions:
       actions: read # Needed to detect the GitHub Actions environment
       id-token: write # Needed to create the provenance via GitHub OIDC
@@ -101,13 +101,13 @@ jobs:
           token: ${{ secrets.REPO_CHECKOUT_TOKEN }}
 
       - name: Download artifact
-        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
+        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
         with:
           name: crate-${{ inputs.package-name }}
           path: target/package
 
       - name: Authenticate on registry
-        uses: rust-lang/crates-io-auth-action@b7e9a28eded4986ec6b1fa40eeee8f8f165559ec # v1.0.3
+        uses: rust-lang/crates-io-auth-action@bbd81622f20ce9e2dd9622e3218b975523e45bbe # v1.0.4
         id: auth
 
       - name: Publish crate.io package

.github/workflows/make_release_common_cuda.yml

@@ -1,12 +1,36 @@
-name: make_release_cuda
+# Common workflow to make crate release for CUDA backend
+name: make_release_common_cuda
 
 on:
-  workflow_dispatch:
+  workflow_call:
     inputs:
-      dry_run:
-        description: "Dry-run"
+      package-name:
+        type: string
+        required: true
+      dry-run:
         type: boolean
         default: true
+    secrets:
+      REPO_CHECKOUT_TOKEN:
+        required: true
+      SLAB_ACTION_TOKEN:
+        required: true
+      SLAB_BASE_URL:
+        required: true
+      SLAB_URL:
+        required: true
+      JOB_SECRET:
+        required: true
+      SLACK_CHANNEL:
+        required: true
+      BOT_USERNAME:
+        required: true
+      SLACK_WEBHOOK:
+        required: true
+      ALLOWED_TEAM:
+        required: true
+      READ_ORG_TOKEN:
+        required: true
 
 env:
   ACTION_RUN_URL: ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}
@@ -21,15 +45,15 @@ permissions: {}
 
 jobs:
   verify-triggering-actor:
-    name: make_release_cuda/verify-triggering-actor
+    name: make_release_common_cuda/verify-triggering-actor
     if: startsWith(github.ref, 'refs/tags/')
     uses: ./.github/workflows/verify_triggering_actor.yml
     secrets:
-      ALLOWED_TEAM: ${{ secrets.RELEASE_TEAM }}
+      ALLOWED_TEAM: ${{ secrets.ALLOWED_TEAM }}
       READ_ORG_TOKEN: ${{ secrets.READ_ORG_TOKEN }}
 
   setup-instance:
-    name: make_release_cuda/setup-instance
+    name: make_release_common_cuda/setup-instance
     needs: verify-triggering-actor
     runs-on: ubuntu-latest
     outputs:
@@ -37,7 +61,7 @@ jobs:
     steps:
       - name: Start instance
         id: start-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: start
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -47,7 +71,7 @@ jobs:
           profile: gpu-build
 
   package:
-    name: make_release_cuda/package
+    name: make_release_common_cuda/package
     needs: setup-instance
     runs-on: ${{ needs.setup-instance.outputs.runner-name }}
     outputs:
@@ -76,7 +100,6 @@ jobs:
           toolchain: stable
 
       - name: Export CUDA variables
-        if: ${{ !cancelled() }}
         run: |
           echo "$CUDA_PATH/bin" >> "${GITHUB_PATH}"
           {
@@ -89,7 +112,6 @@ jobs:
 
       # Specify the correct host compilers
       - name: Export gcc and g++ variables
-        if: ${{ !cancelled() }}
         run: |
           {
             echo "CC=/usr/bin/gcc-${GCC_VERSION}";
@@ -101,12 +123,14 @@ jobs:
           GCC_VERSION: ${{ matrix.gcc }}
 
       - name: Prepare package
+        env:
+          PACKAGE: ${{ inputs.package-name }}
         run: |
-          cargo package -p tfhe-cuda-backend
+          cargo package -p "${PACKAGE}"
 
-      - uses: actions/upload-artifact@b7c566a772e6b6bfb58ed0dc250532a479d7789f # v6.0.0
+      - uses: actions/upload-artifact@bbbca2ddaa5d8feaa63e36b76fdaad77386f024f # v7.0.0
         with:
-          name: crate-tfhe-cuda-backend
+          name: crate-${{ inputs.package-name }}
           path: target/package/*.crate
 
       - name: generate hash
@@ -114,11 +138,11 @@ jobs:
         run: cd target/package && echo "hash=$(sha256sum ./*.crate | base64 -w0)" >> "${GITHUB_OUTPUT}"
 
   provenance:
-    name: make_release_cuda/provenance
-    if: ${{ !inputs.dry_run  }}
+    name: make_release_common_cuda/provenance
+    if: ${{ !inputs.dry-run  }}
     needs: [package]
     # This action cannot be pinned to a specific commit (see https://github.com/slsa-framework/slsa-github-generator/blob/main/README.md#referencing-slsa-builders-and-generators)
-    uses: slsa-framework/slsa-github-generator/.github/workflows/generator_generic_slsa3.yml@v2.1.0
+    uses: slsa-framework/slsa-github-generator/.github/workflows/generator_generic_slsa3.yml@v2.1.0 # zizmor: ignore[unpinned-uses] as said above SLSA cannot be pinned by tag today
     permissions:
       actions: read # Needed to detect the GitHub Actions environment
       id-token: write # Needed to create the provenance via GitHub OIDC
@@ -128,7 +152,7 @@ jobs:
       base64-subjects: ${{ needs.package.outputs.hash }}
 
   publish-cuda-release:
-    name: make_release_cuda/publish-cuda-release
+    name: make_release_common_cuda/publish-cuda-release
     needs: [setup-instance, package] # for comparing hashes
     runs-on: ${{ needs.setup-instance.outputs.runner-name }}
     permissions:
@@ -150,7 +174,6 @@ jobs:
           toolchain: stable
 
       - name: Export CUDA variables
-        if: ${{ !cancelled() }}
         run: |
           echo "$CUDA_PATH/bin" >> "${GITHUB_PATH}"
           {
@@ -163,7 +186,6 @@ jobs:
 
       # Specify the correct host compilers
       - name: Export gcc and g++ variables
-        if: ${{ !cancelled() }}
         run: |
           {
             echo "CC=/usr/bin/gcc-${GCC_VERSION}";
@@ -175,24 +197,25 @@ jobs:
           GCC_VERSION: ${{ matrix.gcc }}
 
       - name: Download artifact
-        uses: actions/download-artifact@37930b1c2abaa49bbe596cd826c3c89aef350131 # v7.0.0
+        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
         with:
-          name: crate-tfhe-cuda-backend
+          name: crate-${{ inputs.package-name }}
           path: target/package
 
       - name: Authenticate on registry
-        uses: rust-lang/crates-io-auth-action@b7e9a28eded4986ec6b1fa40eeee8f8f165559ec # v1.0.3
+        uses: rust-lang/crates-io-auth-action@bbd81622f20ce9e2dd9622e3218b975523e45bbe # v1.0.4
         id: auth
 
       - name: Publish crate.io package
         env:
           CARGO_REGISTRY_TOKEN: ${{ steps.auth.outputs.token }}
-          DRY_RUN: ${{ inputs.dry_run && '--dry-run' || '' }}
+          PACKAGE: ${{ inputs.package-name }}
+          DRY-RUN: ${{ inputs.dry-run && '--dry-run' || '' }}
         run: |
-          # DRY_RUN expansion cannot be double quoted when variable contains empty string otherwise cargo publish 
-          # would fail. This is safe since DRY_RUN is handled in the env section above.
+          # dry-run expansion cannot be double quoted when variable contains empty string otherwise cargo publish
+          # would fail. This is safe since dry-run is handled in the env section above.
           # shellcheck disable=SC2086
-          cargo publish -p tfhe-cuda-backend ${DRY_RUN}
+          cargo publish -p "${PACKAGE}" ${DRY-RUN}
 
       - name: Generate hash
         id: published_hash
@@ -204,7 +227,7 @@ jobs:
         uses: rtCamp/action-slack-notify@e31e87e03dd19038e411e38ae27cbad084a90661 # v2.3.3
         env:
           SLACK_COLOR: failure
-          SLACK_MESSAGE: "SLSA tfhe-cuda-backend crate - hash comparison failure: (${{ env.ACTION_RUN_URL }})"
+          SLACK_MESSAGE: "SLSA ${{ inputs.package-name }} crate - hash comparison failure: (${{ env.ACTION_RUN_URL }})"
 
       - name: Slack Notification
         if: ${{ failure() || (cancelled() && github.event_name != 'pull_request') }}
@@ -212,17 +235,17 @@ jobs:
         uses: rtCamp/action-slack-notify@e31e87e03dd19038e411e38ae27cbad084a90661 # v2.3.3
         env:
           SLACK_COLOR: ${{ job.status }}
-          SLACK_MESSAGE: "tfhe-cuda-backend release finished with status: ${{ job.status }}. (${{ env.ACTION_RUN_URL }})"
+          SLACK_MESSAGE: "${{ inputs.package-name }} release finished with status: ${{ job.status }}. (${{ env.ACTION_RUN_URL }})"
 
   teardown-instance:
-    name: make_release_cuda/teardown-instance
+    name: make_release_common_cuda/teardown-instance
     if: ${{ always() && needs.setup-instance.result == 'success' }}
     needs: [setup-instance, publish-cuda-release]
     runs-on: ubuntu-latest
     steps:
       - name: Stop instance
         id: stop-instance
-        uses: zama-ai/slab-github-runner@0a812986560d3f10dc65728b1ccb9ae4c48a8a16 # v1.5.1
+        uses: zama-ai/slab-github-runner@5aee5d157f4a0201e5eaefc9cc648e5f9f5472a5 # v1.6.0
         with:
           mode: stop
           github-token: ${{ secrets.SLAB_ACTION_TOKEN }}
@@ -235,4 +258,4 @@ jobs:
         uses: rtCamp/action-slack-notify@e31e87e03dd19038e411e38ae27cbad084a90661
         env:
           SLACK_COLOR: ${{ job.status }}
-          SLACK_MESSAGE: "Instance teardown (publish-cuda-release) finished with status: ${{ job.status }}. (${{ env.ACTION_RUN_URL }})"
+          SLACK_MESSAGE: "Instance teardown (${{ inputs.package-name }} release) finished with status: ${{ job.status }}. (${{ env.ACTION_RUN_URL }})"

.github/workflows/make_release_tfhe.yml

@@ -16,6 +16,10 @@ on:
         description: "Push web js package"
         type: boolean
         default: true
+      push_web_compat_package:
+        description: "Push web compat (cross-origin) js package"
+        type: boolean
+        default: true
       push_node_package:
         description: "Push node js package"
         type: boolean
@@ -85,7 +89,7 @@ jobs:
           make build_web_js_api_parallel
 
       - name: Authenticate on NPM
-        uses: actions/setup-node@6044e13b5dc448c55e2357c09f80417699197238 # v6.2.0
+        uses: actions/setup-node@53b83947a5a98c8d113130e565377fae1a50d02f # v6.3.0
         with:
           node-version: '24'
           registry-url: 'https://registry.npmjs.org'
@@ -99,6 +103,23 @@ jobs:
           tag: ${{ env.NPM_TAG }}
           provenance: true
 
+      - name: Build web compat (cross-origin) package
+        if: ${{ inputs.push_web_compat_package }}
+        run: |
+          rm -rf tfhe/pkg
+
+          make build_web_js_api
+          sed -i 's/"tfhe"/"tfhe-compat"/g' tfhe/pkg/package.json
+
+      - name: Publish web compat (cross-origin) package
+        if: ${{ inputs.push_web_compat_package }}
+        uses: JS-DevTools/npm-publish@0fd2f4369c5d6bcfcde6091a7c527d810b9b5c3f
+        with:
+          package: tfhe/pkg/package.json
+          dry-run: ${{ inputs.dry_run }}
+          tag: ${{ env.NPM_TAG }}
+          provenance: true
+
       - name: Build Node package
         if: ${{ inputs.push_node_package }}
         run: |

.github/workflows/make_release_tfhe_cuda.yml

@@ -0,0 +1,44 @@
+# Publish new release of tfhe-rs CUDA backend on crates.io.
+name: make_release_tfhe_cuda
+
+on:
+  workflow_dispatch:
+    inputs:
+      dry_run:
+        description: "Dry-run"
+        type: boolean
+        default: true
+
+env:
+  ACTION_RUN_URL: ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}
+  SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}
+  SLACK_ICON: https://pbs.twimg.com/profile_images/1274014582265298945/OjBKP9kn_400x400.png
+  SLACK_USERNAME: ${{ secrets.BOT_USERNAME }}
+  SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+
+permissions: {}
+
+# zizmor: ignore[concurrency-limits] only Zama organization members can trigger this workflow
+
+jobs:
+  make-release:
+    name: make_release_tfhe_cuda/make-release
+    uses: ./.github/workflows/make_release_common_cuda.yml
+    with:
+      package-name: "tfhe-cuda-backend"
+      dry-run: ${{ inputs.dry_run }}
+    permissions:
+      actions: read # Needed to detect the GitHub Actions environment
+      id-token: write # Needed to create the provenance via GitHub OIDC
+      contents: write # Needed to upload assets/artifacts
+    secrets:
+      BOT_USERNAME: ${{ secrets.BOT_USERNAME }}
+      SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}
+      SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+      REPO_CHECKOUT_TOKEN: ${{ secrets.REPO_CHECKOUT_TOKEN }}
+      ALLOWED_TEAM: ${{ secrets.RELEASE_TEAM }}
+      READ_ORG_TOKEN: ${{ secrets.READ_ORG_TOKEN }}
+      SLAB_ACTION_TOKEN: ${{ secrets.SLAB_ACTION_TOKEN }}
+      SLAB_BASE_URL: ${{ secrets.SLAB_BASE_URL }}
+      SLAB_URL: ${{ secrets.SLAB_URL }}
+      JOB_SECRET: ${{ secrets.JOB_SECRET }}

.github/workflows/make_release_tfhe_safe_serialize.yml

@@ -0,0 +1,32 @@
+name: make_release_tfhe_safe_serialize
+
+on:
+  workflow_dispatch:
+    inputs:
+      dry_run:
+        description: "Dry-run"
+        type: boolean
+        default: true
+
+permissions: {}
+
+# zizmor: ignore[concurrency-limits] only Zama organization members can trigger this workflow
+
+jobs:
+  make-release:
+    name: make_release_tfhe_safe_serialize/make-release
+    uses: ./.github/workflows/make_release_common.yml
+    with:
+      package-name: "tfhe-safe-serialize"
+      dry-run: ${{ inputs.dry_run }}
+    permissions:
+      actions: read # Needed to detect the GitHub Actions environment
+      id-token: write # Needed to create the provenance via GitHub OIDC
+      contents: write # Needed to upload assets/artifacts
+    secrets:
+      BOT_USERNAME: ${{ secrets.BOT_USERNAME }}
+      SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}
+      SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+      REPO_CHECKOUT_TOKEN: ${{ secrets.REPO_CHECKOUT_TOKEN }}
+      ALLOWED_TEAM: ${{ secrets.RELEASE_TEAM }}
+      READ_ORG_TOKEN: ${{ secrets.READ_ORG_TOKEN }}

.github/workflows/make_release_wasm_par_mq.yml

@@ -0,0 +1,33 @@
+# Publish new release of wasm_par_mq
+name: make_release_wasm_par_mq
+
+on:
+  workflow_dispatch:
+    inputs:
+      dry_run:
+        description: "Dry-run"
+        type: boolean
+        default: true
+
+permissions: {}
+
+# zizmor: ignore[concurrency-limits] only Zama organization members can trigger this workflow
+
+jobs:
+  make-release:
+    name: make_release_wasm_par_mq/make-release
+    uses: ./.github/workflows/make_release_common.yml
+    with:
+      package-name: "wasm-par-mq"
+      dry-run: ${{ inputs.dry_run }}
+    permissions:
+      actions: read # Needed to detect the GitHub Actions environment
+      id-token: write # Needed to create the provenance via GitHub OIDC
+      contents: write # Needed to upload assets/artifacts
+    secrets:
+      BOT_USERNAME: ${{ secrets.BOT_USERNAME }}
+      SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}
+      SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+      REPO_CHECKOUT_TOKEN: ${{ secrets.REPO_CHECKOUT_TOKEN }}
+      ALLOWED_TEAM: ${{ secrets.RELEASE_TEAM }}
+      READ_ORG_TOKEN: ${{ secrets.READ_ORG_TOKEN }}

.github/workflows/make_release_zk_cuda.yml

@@ -0,0 +1,44 @@
+# Publish new release of CUDA Zero-Knowledge primitives on crates.io.
+name: make_release_zk_cuda
+
+on:
+  workflow_dispatch:
+    inputs:
+      dry_run:
+        description: "Dry-run"
+        type: boolean
+        default: true
+
+env:
+  ACTION_RUN_URL: ${{ github.server_url }}/${{ github.repository }}/actions/runs/${{ github.run_id }}
+  SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}
+  SLACK_ICON: https://pbs.twimg.com/profile_images/1274014582265298945/OjBKP9kn_400x400.png
+  SLACK_USERNAME: ${{ secrets.BOT_USERNAME }}
+  SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+
+permissions: {}
+
+# zizmor: ignore[concurrency-limits] only Zama organization members can trigger this workflow
+
+jobs:
+  make-release:
+    name: make_release_zk_cuda/make-release
+    uses: ./.github/workflows/make_release_common_cuda.yml
+    with:
+      package-name: "zk-cuda-backend"
+      dry-run: ${{ inputs.dry_run }}
+    permissions:
+      actions: read # Needed to detect the GitHub Actions environment
+      id-token: write # Needed to create the provenance via GitHub OIDC
+      contents: write # Needed to upload assets/artifacts
+    secrets:
+      BOT_USERNAME: ${{ secrets.BOT_USERNAME }}
+      SLACK_CHANNEL: ${{ secrets.SLACK_CHANNEL }}
+      SLACK_WEBHOOK: ${{ secrets.SLACK_WEBHOOK }}
+      REPO_CHECKOUT_TOKEN: ${{ secrets.REPO_CHECKOUT_TOKEN }}
+      ALLOWED_TEAM: ${{ secrets.RELEASE_TEAM }}
+      READ_ORG_TOKEN: ${{ secrets.READ_ORG_TOKEN }}
+      SLAB_ACTION_TOKEN: ${{ secrets.SLAB_ACTION_TOKEN }}
+      SLAB_BASE_URL: ${{ secrets.SLAB_BASE_URL }}
+      SLAB_URL: ${{ secrets.SLAB_URL }}
+      JOB_SECRET: ${{ secrets.JOB_SECRET }}

.github/workflows/parameters_check.yml

@@ -53,7 +53,7 @@ jobs:
 
       - name: Restore Sagemath image from cache
         id: docker-cache
-        uses: actions/cache/restore@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/restore@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         with:
           path: /tmp/sagemath_image
           key: sagemath-image-${{ env.SAGEMATH_VERSION }}-${{ github.sha }}
@@ -76,7 +76,7 @@ jobs:
       - name: Store Sagemath image in cache
         if: steps.docker-cache.outputs.cache-hit != 'true'
         continue-on-error: true
-        uses: actions/cache/save@cdf6c1fa76f9f475f3d7449005a359c84ca0f306 #v5.0.3
+        uses: actions/cache/save@668228422ae6a00e4ad889ee87cd7109ec5666a7 #v5.0.4
         with:
           path: /tmp/sagemath_image
           key: sagemath-image-${{ env.SAGEMATH_VERSION }}-${{ github.sha }}

.github/workflows/sync_on_push.yml

@@ -4,7 +4,7 @@ name: sync_on_push
 on:
   push:
     branches:
-      - 'main'
+      - "main"
   workflow_dispatch:
 
 permissions: {}
@@ -24,6 +24,8 @@ jobs:
           SOURCE_REPO: "zama-ai/tfhe-rs"
           SOURCE_BRANCH: "main"
           DESTINATION_BRANCH: "main"
+          SOURCE_TAGS: "refs/tags/*"
+          DESTINATION_TAGS: "refs/tags/*"
           USERNAME: ${{ secrets.BOT_USERNAME }}
           TOKEN: ${{ secrets.SYNC_REPO_TOKEN }}
           DEST_REPO: ${{ secrets.SYNC_DEST_REPO }}
@@ -34,43 +36,15 @@ jobs:
           git remote add destination "https://${USERNAME}:${TOKEN}@github.com/${DEST_REPO}.git"
 
           echo ">>> Fetching all branches references down locally so subsequent commands can see them..."
-          git fetch source '+refs/heads/*:refs/heads/*' --update-head-ok
+          git fetch --all --tags --update-head-ok --quiet
 
-          echo ">>> Print out all branches"
-          git --no-pager branch -a -vv
+          echo ">>> Sync LFS items from source..."
+          ./scripts/lfs_sync.sh source destination "${SOURCE_BRANCH}"
 
-          echo ">>> Fetching all LFS items from source..."
-          git lfs fetch --all source "${SOURCE_BRANCH}"
-
-          echo ">>> Pushing git changes..."
+          echo ">>> Pushing git changes for ${SOURCE_BRANCH}..."
           git push destination "${SOURCE_BRANCH}:${DESTINATION_BRANCH}" -f
 
-          echo ">>> Pushing all LFS items..."
-          git lfs push --all destination "${DESTINATION_BRANCH}"
-          
-          shred --remove .git/config
-
-      - name: git-sync-tags
-        env:
-          SOURCE_REPO: "zama-ai/tfhe-rs"
-          SOURCE_BRANCH: "refs/tags/*"
-          DESTINATION_BRANCH: "refs/tags/*"
-          USERNAME: ${{ secrets.BOT_USERNAME }}
-          TOKEN: ${{ secrets.SYNC_REPO_TOKEN }}
-          DEST_REPO: ${{ secrets.SYNC_DEST_REPO }}
-        run: |
-          echo ">>> Cloning source repo..."
-          git lfs install
-          git clone --quiet "https://${USERNAME}:${TOKEN}@github.com/${SOURCE_REPO}.git" ./tfhe-rs-tag --origin source && cd ./tfhe-rs-tag
-          git remote add destination "https://${USERNAME}:${TOKEN}@github.com/${DEST_REPO}.git"
-
-          echo ">>> Fetching all branches references down locally so subsequent commands can see them..."
-          git fetch source '+refs/heads/*:refs/heads/*' --update-head-ok
-
-          echo ">>> Print out all branches"
-          git --no-pager branch -a -vv
-
-          echo ">>> Pushing git changes..."
-          git push destination "${SOURCE_BRANCH}:${DESTINATION_BRANCH}" -f
-          
+          echo ">>> Pushing git tags..."
+          git push destination "${SOURCE_TAGS}:${DESTINATION_TAGS}" -f
+
           shred --remove .git/config

.github/workflows/unverified_prs.yml

@@ -20,8 +20,8 @@ jobs:
     steps:
       - uses: actions/stale@b5d41d4e1d5dceea10e7104786b73624c18a190f # v10.2.0
         with:
-          stale-pr-message: 'This PR is unverified and has been open for 2 days, it will now be closed. If you want to contribute please sign the CLA as indicated by the bot.'
-          days-before-stale: 2
+          stale-pr-message: 'This PR is unverified and has been open for 7 days, it will now be closed. If you want to contribute please sign the CLA as indicated by the bot.'
+          days-before-stale: 7
           days-before-close: 0
           # We are not interested in suppressing issues so have a currently non existent label
           # if we ever accept issues to become stale/closable this label will be the signal for that

.gitignore

@@ -33,6 +33,10 @@ venv/
 web-test-runner/
 node_modules/
 package-lock.json
+utils/wasm-par-mq/examples/*/pkg/
+
+# Commit lock files of backward data generation crates
+!utils/tfhe-backward-compat-data/crates/generate_*/Cargo.lock
 
 # Python .env
 .env

.linelint.yml

@@ -9,8 +9,10 @@ ignore:
   - tfhe/web_wasm_parallel_tests/dist
   - keys
   - coverage
-  - utils/tfhe-lints/tests/*/main.stderr
+  - utils/tfhe-lints/**/main.stderr
+  - utils/tfhe-lints/**/*.json
   - utils/tfhe-backward-compat-data/**/*.ron # ron files are autogenerated
+  - tests/corrupted_inputs_deserialization/data/proven_compact_list/**/metadata.txt
 
 rules:
   # checks if file ends in a newline character

Cargo.toml

@@ -1,24 +1,30 @@
 [workspace]
 resolver = "3"
 members = [
+    "apps/test-vectors",
+    "backends/tfhe-cuda-backend",
+    "backends/tfhe-hpu-backend",
+    "backends/zk-cuda-backend",
+    "mockups/tfhe-hpu-mockup",
+    "tasks",
+    "tests",
     "tfhe",
     "tfhe-benchmark",
+    "tfhe-csprng",
     "tfhe-fft",
     "tfhe-ntt",
     "tfhe-zk-pok",
-    "tasks",
-    "tfhe-csprng",
-    "backends/tfhe-cuda-backend",
-    "backends/zk-cuda-backend",
-    "backends/tfhe-hpu-backend",
-    "utils/tfhe-versionable",
-    "utils/tfhe-versionable-derive",
+    "utils/benchmark_spec",
+    "utils/param_dedup",
+    "utils/tfhe-backward-compat-checker",
     "utils/tfhe-backward-compat-data",
     "utils/tfhe-backward-compat-data/crates/add_new_version",
-    "utils/param_dedup",
-    "tests",
-    "mockups/tfhe-hpu-mockup",
-    "apps/test-vectors",
+    "utils/tfhe-safe-serialize",
+    "utils/tfhe-versionable",
+    "utils/tfhe-versionable-derive",
+    "utils/wasm-par-mq",
+    "utils/wasm-par-mq/examples/msm",
+    "utils/wasm-par-mq/web_tests",
 ]
 
 exclude = ["utils/tfhe-lints", "apps/trivium"]
@@ -38,14 +44,21 @@ pulp = { version = "0.22", default-features = false }
 rand = "0.8"
 rayon = "1.11"
 serde = { version = "1.0", default-features = false }
-wasm-bindgen = "0.2.101"
-getrandom = "0.2.8"
-# The project maintainers consider that this is the last version of the 1.3 branch, any newer version should not be trusted
+wasm-bindgen = { version = "0.2.114" }
+wasm-bindgen-futures = { version = "0.4.56" }
+# js-sys (at this point in time) automatically enables the unsafe-eval feature which we do not want
+# this does not prevent other deps from enabling it, but it at least conveys our need to not have it
+# we still enable std, which was part of default before
+js-sys = { version = "0.3.91", default-features = false, features = ["std"] }
+getrandom = "0.2.17"
 bindgen = "0.71"
+# The project maintainers consider that this is the last version of the 1.3 branch, any newer version should not be trusted
 bincode = "=1.3.3"
 cmake = "0.1"
 pkg-config = "0.3"
 clap = { version = "4.5", features = ["derive"] }
+serde-wasm-bindgen = "0.6.5"
+paste = "1.0.15"
 
 [profile.bench]
 lto = "fat"
@@ -65,7 +78,10 @@ lto = "off"
 debug-assertions = false
 
 [workspace.metadata.dylint]
-libraries = [{ path = "utils/tfhe-lints" }]
+libraries = [
+    { path = "utils/tfhe-lints/lints" },
+    { path = "utils/tfhe-lints/snapshot" },
+]
 
 [profile.debug_lto_off]
 inherits = "dev"

LICENSE

@@ -1,6 +1,6 @@
 BSD 3-Clause Clear License
 
-Copyright © 2025 ZAMA.
+Copyright © 2026 ZAMA.
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without modification,

Makefile

@@ -26,6 +26,7 @@ BENCH_CUSTOM_COMMAND:=
 NODE_VERSION=24.12
 BACKWARD_COMPAT_DATA_DIR=utils/tfhe-backward-compat-data
 BACKWARD_COMPAT_DATA_GEN_VERSION:=$(TFHE_VERSION)
+CORRUPTED_INPUTS_TEST=tests/corrupted_inputs_deserialization
 TEST_VECTORS_DIR=apps/test-vectors
 CURRENT_TFHE_VERSION:=$(shell grep '^version[[:space:]]*=' tfhe/Cargo.toml | cut -d '=' -f 2 | xargs)
 WASM_PACK_VERSION="0.13.1"
@@ -33,12 +34,14 @@ WASM_BINDGEN_VERSION:=$(shell cargo tree --target wasm32-unknown-unknown -e all
 WEB_RUNNER_DIR=web-test-runner
 WEB_SERVER_DIR=tfhe/web_wasm_parallel_tests
 TAPLO_VERSION=0.10.0
-TYPOS_VERSION=1.42.0
-ZIZMOR_VERSION=1.20.0
+TYPOS_VERSION=1.44.0
+ZIZMOR_VERSION=1.22.0
 # This is done to avoid forgetting it, we still precise the RUSTFLAGS in the commands to be able to
 # copy paste the command in the terminal and change them if required without forgetting the flags
 export RUSTFLAGS?=-C target-cpu=native
 
+include utils/tfhe-lints/Makefile
+
 ifeq ($(GEN_KEY_CACHE_MULTI_BIT_ONLY),TRUE)
 		MULTI_BIT_ONLY=--multi-bit-only
 else
@@ -119,6 +122,12 @@ install_build_wasm32_target:
 	( echo "Unable to install wasm32-unknown-unknown target toolchain, check your rustup installation. \
 	Rustup can be downloaded at https://rustup.rs/" && exit 1 )
 
+.PHONY: install_check_wasm32_target # Install the wasm32 toolchain used for checks
+install_check_wasm32_target:
+	rustup target add wasm32-unknown-unknown --toolchain "$(RS_CHECK_TOOLCHAIN)" || \
+	( echo "Unable to install wasm32-unknown-unknown target toolchain, check your rustup installation. \
+	Rustup can be downloaded at https://rustup.rs/" && exit 1 )
+
 .PHONY: install_cargo_nextest # Install cargo nextest used for shortint tests
 install_cargo_nextest:
 	@cargo nextest --version > /dev/null 2>&1 || \
@@ -170,10 +179,6 @@ install_tarpaulin:
 	cargo install cargo-tarpaulin --locked || \
 	( echo "Unable to install cargo tarpaulin, unknown error." && exit 1 )
 
-.PHONY: install_cargo_dylint # Install custom tfhe-rs lints
-install_cargo_dylint:
-	cargo install --locked cargo-dylint dylint-link
-
 .PHONY: install_cargo_audit # Check dependencies
 install_cargo_audit:
 	cargo install --locked cargo-audit
@@ -231,19 +236,19 @@ install_chrome_web_driver: decompress_cmd = unzip
 .PHONY: install_chrome_web_driver # Install Chrome web driver for Linux
 install_chrome_web_driver: install_web_resource
 
-install_firefox_browser: url = "https://download-installer.cdn.mozilla.net/pub/firefox/releases/131.0/linux-x86_64/en-US/firefox-131.0.tar.bz2"
-install_firefox_browser: checksum = "4ca8504a62a31472ecb8c3a769d4301dd4ac692d4cc5d51b8fe2cf41e7b11106"
+install_firefox_browser: url = "https://download-installer.cdn.mozilla.net/pub/firefox/releases/147.0/linux-x86_64/en-US/firefox-147.0.tar.xz"
+install_firefox_browser: checksum = "f055b9c0d7346a10d22edc7f10e08679af2ea495367381ab2be9cab3ec6add97"
 install_firefox_browser: dest = "$(WEB_RUNNER_DIR)/firefox"
-install_firefox_browser: filename = "firefox-131.0.tar.bz2"
+install_firefox_browser: filename = "firefox-147.0.tar.xz"
 install_firefox_browser: decompress_cmd = tar -xvf
 
 .PHONY: install_firefox_browser # Install firefox browser for Linux
 install_firefox_browser: install_web_resource
 
-install_firefox_web_driver: url = "https://github.com/mozilla/geckodriver/releases/download/v0.35.0/geckodriver-v0.35.0-linux64.tar.gz"
-install_firefox_web_driver: checksum = "ac26e9ba8f3b8ce0fbf7339b9c9020192f6dcfcbf04a2bcd2af80dfe6bb24260"
+install_firefox_web_driver: url = "https://github.com/mozilla/geckodriver/releases/download/v0.36.0/geckodriver-v0.36.0-linux64.tar.gz"
+install_firefox_web_driver: checksum = "0bde38707eb0a686a20c6bd50f4adcc7d60d4f73c60eb83ee9e0db8f65823e04"
 install_firefox_web_driver: dest = "$(WEB_RUNNER_DIR)/firefox"
-install_firefox_web_driver: filename = "geckodriver-v0.35.0-linux64.tar.gz"
+install_firefox_web_driver: filename = "geckodriver-v0.36.0-linux64.tar.gz"
 install_firefox_web_driver: decompress_cmd = tar -xvf
 
 .PHONY: install_firefox_web_driver # Install firefox web driver for Linux
@@ -294,7 +299,8 @@ fmt_js: check_nvm_installed
 	nvm install $(NODE_VERSION) && \
 	nvm use $(NODE_VERSION) && \
 	$(MAKE) -C tfhe/web_wasm_parallel_tests fmt && \
-	$(MAKE) -C tfhe/js_on_wasm_tests fmt
+	$(MAKE) -C tfhe/js_on_wasm_tests fmt && \
+	$(MAKE) -C utils/wasm-par-mq fmt
 
 .PHONY: semgrep_lint_setup_venv # Create venv and install Python dependencies for GPU lint checks
 semgrep_lint_setup_venv:
@@ -309,6 +315,11 @@ semgrep_and_lint_gpu_code: semgrep_lint_setup_venv
 		| xargs venv/bin/semgrep --config "$(TFHECUDA_SRC)/.semgrep/release-ordering.yaml" --scan-unknown-extensions
 	venv/bin/python3 "scripts/check_scratch_cleanup.py"
 
+.PHONY: semver_check_cuda_backend # Run semver checks on tfhe-cuda-backend
+semver_check_cuda_backend:
+	cargo install cargo-semver-checks --locked
+	DOCS_RS=1 cargo semver-checks --package tfhe-cuda-backend
+
 .PHONY: fmt_gpu # Format rust and cuda code
 fmt_gpu: install_rs_check_toolchain
 	cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" fmt
@@ -339,16 +350,17 @@ check_fmt_js: check_nvm_installed
 	nvm install $(NODE_VERSION) && \
 	nvm use $(NODE_VERSION) && \
 	$(MAKE) -C tfhe/web_wasm_parallel_tests check_fmt && \
-	$(MAKE) -C tfhe/js_on_wasm_tests check_fmt
+	$(MAKE) -C tfhe/js_on_wasm_tests check_fmt && \
+	$(MAKE) -C utils/wasm-par-mq check_fmt
 
 .PHONY: check_fmt_toml # Check TOML files format
 check_fmt_toml: install_taplo
 	@RUST_LOG=warn taplo fmt --check || \
-	echo "TOML files format check failed. Please run 'make fmt_toml'"
+	{ echo "TOML files format check failed. Please run 'make fmt_toml'"; exit 1; }
 
 .PHONY: check_typos # Check for typos in codebase
 check_typos: install_typos_checker
-	@typos && echo "No typos found"
+	@git ls-files ":!*.png" ":!*.cbor" ":!*.bcode" ":!*.ico" ":!*/twiddles.cu" | typos --file-list - && echo "No typos found"
 
 .PHONY: clippy_gpu # Run clippy lints on tfhe with "gpu" enabled
 clippy_gpu: install_rs_check_toolchain
@@ -478,11 +490,17 @@ clippy_c_api: install_rs_check_toolchain
 
 .PHONY: clippy_js_wasm_api # Run clippy lints enabling the boolean, shortint, integer and the js wasm API
 clippy_js_wasm_api: install_rs_check_toolchain
+	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy \
+		--features=boolean-client-js-wasm-api,shortint-client-js-wasm-api,integer-client-js-wasm-api,high-level-client-js-wasm-api,extended-types \
+		-p tfhe -- --no-deps -D warnings
 	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy \
 		--features=boolean-client-js-wasm-api,shortint-client-js-wasm-api,integer-client-js-wasm-api,high-level-client-js-wasm-api,zk-pok,extended-types \
 		-p tfhe -- --no-deps -D warnings
 	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy \
-		--features=boolean-client-js-wasm-api,shortint-client-js-wasm-api,integer-client-js-wasm-api,high-level-client-js-wasm-api,extended-types \
+		--features=boolean-client-js-wasm-api,shortint-client-js-wasm-api,integer-client-js-wasm-api,high-level-client-js-wasm-api,zk-pok,extended-types,parallel-wasm-api \
+		-p tfhe -- --no-deps -D warnings
+	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy \
+		--features=boolean-client-js-wasm-api,shortint-client-js-wasm-api,integer-client-js-wasm-api,high-level-client-js-wasm-api,zk-pok,extended-types,cross-origin-wasm-api \
 		-p tfhe -- --no-deps -D warnings
 
 .PHONY: clippy_tasks # Run clippy lints on helper tasks crate.
@@ -498,7 +516,7 @@ clippy_trivium: install_rs_check_toolchain
 .PHONY: clippy_ws_tests # Run clippy on the workspace level tests
 clippy_ws_tests: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --tests \
-		-p tests --features=shortint,integer,zk-pok -- --no-deps -D warnings
+		-p tests --features=shortint,integer,zk-pok,strings -- --no-deps -D warnings
 
 .PHONY: clippy_all_targets # Run clippy lints on all targets (benches, examples, etc.)
 clippy_all_targets: install_rs_check_toolchain
@@ -523,6 +541,15 @@ clippy_zk_pok: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --all-targets \
 		-p tfhe-zk-pok --features=experimental -- --no-deps -D warnings
 
+.PHONY: clippy_zk_pok_wasm # Run clippy lints on tfhe-zk-pok for wasm32 target
+clippy_zk_pok_wasm: install_rs_check_toolchain install_check_wasm32_target
+	RUSTFLAGS="$(WASM_RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy \
+		--target wasm32-unknown-unknown \
+		-p tfhe-zk-pok -- --no-deps -D warnings
+	RUSTFLAGS="$(WASM_RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy \
+		--target wasm32-unknown-unknown \
+		-p tfhe-zk-pok --features cross-origin-wasm -- --no-deps -D warnings
+
 .PHONY: clippy_versionable # Run clippy lints on tfhe-versionable
 clippy_versionable: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --all-targets \
@@ -530,17 +557,21 @@ clippy_versionable: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --all-targets \
 		-p tfhe-versionable -- --no-deps -D warnings
 
-.PHONY: clippy_tfhe_lints # Run clippy lints on tfhe-lints
-clippy_tfhe_lints: install_cargo_dylint # the toolchain is selected with toolchain.toml
-	cd utils/tfhe-lints && \
-	rustup toolchain install && \
-	cargo clippy --all-targets -- --no-deps -D warnings
+.PHONY: clippy_safe_serialize # Run clippy lints on tfhe-safe-serialize
+clippy_safe_serialize: install_rs_check_toolchain
+	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --all-targets \
+		-p tfhe-safe-serialize -- --no-deps -D warnings
 
 .PHONY: clippy_param_dedup # Run clippy lints on param_dedup tool
 clippy_param_dedup: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --all-targets \
 		-p param_dedup -- --no-deps -D warnings
 
+.PHONY: clippy_wasm_par_mq # Run clippy lints on wasm-par-mq and its examples
+clippy_wasm_par_mq: install_rs_check_toolchain
+	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --all-targets --all-features \
+		-p wasm-par-mq -p wasm-par-mq-web-tests -p wasm-par-mq-example-msm -- --no-deps -D warnings
+
 .PHONY: clippy_backward_compat_data # Run clippy lints on tfhe-backward-compat-data
 clippy_backward_compat_data: install_rs_check_toolchain # the toolchain is selected with toolchain.toml
 	RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --all-targets \
@@ -561,11 +592,13 @@ clippy_test_vectors: install_rs_check_toolchain
 	cd apps/test-vectors; RUSTFLAGS="$(RUSTFLAGS)" cargo "$(CARGO_RS_CHECK_TOOLCHAIN)" clippy --all-targets \
 		-p tfhe-test-vectors -- --no-deps -D warnings
 
+# WARNING: This target is not directly run in CI. When adding a subtarget here,
+# MAKE SURE TO ALSO ADD IT TO A PCC BATCH BELOW
 .PHONY: clippy_all # Run all clippy targets
 clippy_all: clippy_rustdoc clippy clippy_boolean clippy_shortint clippy_integer clippy_all_targets \
-clippy_c_api clippy_js_wasm_api clippy_tasks clippy_core clippy_tfhe_csprng clippy_zk_pok clippy_trivium \
-clippy_versionable clippy_tfhe_lints clippy_ws_tests clippy_bench clippy_param_dedup \
-clippy_test_vectors clippy_backward_compat_data
+clippy_c_api clippy_js_wasm_api clippy_tasks clippy_core clippy_tfhe_csprng clippy_zk_pok clippy_zk_pok_wasm clippy_trivium \
+clippy_versionable clippy_safe_serialize clippy_tfhe_lints clippy_ws_tests clippy_bench clippy_param_dedup \
+clippy_test_vectors clippy_backward_compat_data clippy_wasm_par_mq
 
 .PHONY: clippy_fast # Run main clippy targets
 clippy_fast: clippy_rustdoc clippy clippy_all_targets clippy_c_api clippy_js_wasm_api clippy_tasks \
@@ -596,19 +629,10 @@ check_rust_bindings_did_not_change:
 	( echo "Generated bindings have changed! Please run 'git add backends/tfhe-cuda-backend/src/bindings.rs' \
 	and commit the changes." && exit 1 )
 
-
-.PHONY: tfhe_lints # Run custom tfhe-rs lints
-tfhe_lints: install_cargo_dylint
-	RUSTFLAGS="$(RUSTFLAGS) -Dwarnings" cargo dylint --all -p tfhe --no-deps -- \
-		--features=boolean,shortint,integer,strings,zk-pok
-	RUSTFLAGS="$(RUSTFLAGS) -Dwarnings" cargo dylint --all -p tfhe-zk-pok --no-deps -- \
-		--features=experimental
-
 .PHONY: audit_dependencies # Run cargo audit to check vulnerable dependencies
 audit_dependencies: install_cargo_audit
 	cargo audit
 
-
 .PHONY: build_core # Build core_crypto without experimental features
 build_core:
 	RUSTFLAGS="$(RUSTFLAGS)" cargo build --profile $(CARGO_PROFILE) \
@@ -679,11 +703,14 @@ build_c_api_experimental_deterministic_fft: install_rs_check_toolchain
 		--features=boolean-c-api,shortint-c-api,high-level-c-api,zk-pok,experimental-force_fft_algo_dif4 \
 		-p tfhe
 
-.PHONY: build_web_js_api # Build the js API targeting the web browser
+.PHONY: build_web_js_api # Build the js API targeting the web browser, in sequential or cross origin parallelism modes.
 build_web_js_api: install_wasm_pack
 	cd tfhe && \
 	RUSTFLAGS="$(WASM_RUSTFLAGS)" wasm-pack build --release --target=web \
-		-- --features=boolean-client-js-wasm-api,shortint-client-js-wasm-api,integer-client-js-wasm-api,zk-pok,extended-types
+		-- --features=boolean-client-js-wasm-api,shortint-client-js-wasm-api,integer-client-js-wasm-api,zk-pok,extended-types,cross-origin-wasm-api && \
+	find pkg/snippets -type f -iname worker_helpers.js -exec sed -i 's|import("../../..")|import("../../../tfhe.js")|g' {} \;
+	cp utils/wasm-par-mq/js/coordinator.js tfhe/pkg/
+	jq '.files += ["snippets"]' tfhe/pkg/package.json > tmp_pkg.json && mv -f tmp_pkg.json tfhe/pkg/package.json
 
 .PHONY: build_web_js_api_parallel # Build the js API targeting the web browser with parallelism support
 # parallel wasm requires specific build options, see https://github.com/rust-lang/rust/pull/147225
@@ -1105,7 +1132,7 @@ test_high_level_api_gpu_fast: install_cargo_nextest # Run all the GPU tests for
 test_high_level_api_gpu: install_cargo_nextest # Run all the GPU tests for high_level_api
 	RUSTFLAGS="$(RUSTFLAGS)" cargo nextest run --cargo-profile $(CARGO_PROFILE) \
 		--test-threads=4 --features=integer,internal-keycache,gpu,zk-pok -p tfhe \
-  	-E "test(/high_level_api::.*gpu.*/)"
+		-E "test(/high_level_api::.*gpu.*/)"
 
 test_list_gpu: install_cargo_nextest
 	RUSTFLAGS="$(RUSTFLAGS)" cargo nextest list --cargo-profile $(CARGO_PROFILE) \
@@ -1210,25 +1237,25 @@ test_zk_pok:
 	RUSTFLAGS="$(RUSTFLAGS)" cargo test --profile $(CARGO_PROFILE) \
 		-p tfhe-zk-pok --features experimental
 
-.PHONY: test_zk_pok_gpu # Run tfhe-zk-pok GPU-accelerated tests
-test_zk_pok_gpu:
+.PHONY: test_zk_pok_experimental_gpu # Run tfhe-zk-pok GPU-accelerated tests
+test_zk_pok_experimental_gpu:
 	RUSTFLAGS="$(RUSTFLAGS)" cargo test --profile $(CARGO_PROFILE) \
 		-p tfhe-zk-pok --features experimental,gpu-experimental -- gpu
 
 .PHONY: test_integer_zk_gpu # Run tfhe-zk-pok tests
-test_integer_zk_gpu: install_rs_check_toolchain
-	RUSTFLAGS="$(RUSTFLAGS)" cargo $(CARGO_RS_BUILD_TOOLCHAIN) test --profile release \
+test_integer_zk_gpu:
+	RUSTFLAGS="$(RUSTFLAGS)" cargo test --profile $(CARGO_PROFILE) \
 		--features=integer,zk-pok,gpu -p tfhe -- \
 		integer::gpu::zk::
 
 .PHONY: test_integer_zk_experimental_gpu # Run tfhe-zk-pok tests
-test_integer_zk_experimental_gpu: install_rs_check_toolchain
-	RUSTFLAGS="$(RUSTFLAGS)" cargo $(CARGO_RS_BUILD_TOOLCHAIN) test --profile release \
+test_integer_zk_experimental_gpu:
+	RUSTFLAGS="$(RUSTFLAGS)" cargo test --profile $(CARGO_PROFILE) \
 		--features=integer,zk-pok,gpu,gpu-experimental-zk -p tfhe -- \
 		integer::gpu::zk::
 
 .PHONY: test_zk_cuda # Run all GPU MSM integration tests (CPU vs GPU comparison + integration test)
-test_zk_cuda: install_rs_check_toolchain test_zk_cuda_backend test_zk_pok_gpu test_integer_zk_gpu test_integer_zk_experimental_gpu
+test_zk_cuda: test_zk_cuda_backend test_zk_pok_experimental_gpu test_integer_zk_gpu test_integer_zk_experimental_gpu
 
 .PHONY: test_zk_wasm_x86_compat_ci
 test_zk_wasm_x86_compat_ci: check_nvm_installed
@@ -1248,11 +1275,10 @@ test_versionable:
 	RUSTFLAGS="$(RUSTFLAGS)" cargo test --profile $(CARGO_PROFILE) \
 		--all-targets -p tfhe-versionable
 
-.PHONY: test_tfhe_lints # Run test on tfhe-lints
-test_tfhe_lints: install_cargo_dylint
-	cd utils/tfhe-lints && \
-	rustup toolchain install && \
-	cargo test
+.PHONY: test_safe_serialize # Run tests for tfhe-safe-serialize subcrate
+test_safe_serialize:
+	RUSTFLAGS="$(RUSTFLAGS)" cargo test --profile $(CARGO_PROFILE) \
+		--all-targets -p tfhe-safe-serialize
 
 # The backward compat data folder holds historical binary data but also rust code to generate and load them.
 .PHONY: gen_backward_compat_data # Re-generate backward compatibility data
@@ -1267,11 +1293,19 @@ new_backward_compat_crate:
 .PHONY: test_backward_compatibility_ci
 test_backward_compatibility_ci:
 	TFHE_BACKWARD_COMPAT_DATA_DIR="../$(BACKWARD_COMPAT_DATA_DIR)" RUSTFLAGS="$(RUSTFLAGS)" cargo test --profile $(CARGO_PROFILE) \
-		--features=shortint,integer,zk-pok -p tests test_backward_compatibility -- --nocapture
+		--features=shortint,integer,zk-pok,strings -p tests test_backward_compatibility -- --nocapture
 
 .PHONY: test_backward_compatibility # Same as test_backward_compatibility_ci but tries to clone the data repo first if needed
 test_backward_compatibility: pull_backward_compat_data test_backward_compatibility_ci
 
+.PHONY: test_corrupted_inputs_ci
+test_corrupted_inputs_ci:
+	RUSTFLAGS="$(RUSTFLAGS)" cargo test --profile $(CARGO_PROFILE) \
+		--features=integer,zk-pok,strings -p tests test_corrupted_inputs_deserialization -- --nocapture
+
+.PHONY: test_corrupted_inputs # Same as test_corrupted_inputs_ci but pulls data first
+test_corrupted_inputs: pull_corrupted_inputs_data test_corrupted_inputs_ci
+
 # Generate the test vectors and update the hash file
 .PHONY: gen_test_vectors
 gen_test_vectors:
@@ -1380,6 +1414,19 @@ test_nodejs_wasm_api_ci: build_node_js_api
 
 # This is an internal target, not meant to be called on its own.
 run_web_js_api_parallel: build_web_js_api_parallel setup_venv
+	cd $(WEB_SERVER_DIR) && npm install && npm run build
+	source venv/bin/activate && \
+	python ci/webdriver.py \
+	--browser-path $(browser_path) \
+	--driver-path $(driver_path) \
+	--browser-kind  $(browser_kind) \
+	--server-cmd $(server_cmd) \
+	--server-workdir "$(WEB_SERVER_DIR)" \
+	--id-pattern $(filter) \
+	--id-exclude-pattern asyncMainThread
+
+# This is an internal target, not meant to be called on its own.
+run_web_js_api_cross_origin: build_web_js_api setup_venv
 	cd $(WEB_SERVER_DIR) && npm install && npm run build
 	source venv/bin/activate && \
 	python ci/webdriver.py \
@@ -1422,6 +1469,87 @@ test_web_js_api_parallel_firefox_ci: setup_venv
 	nvm use $(NODE_VERSION) && \
 	$(MAKE) test_web_js_api_parallel_firefox
 
+test_web_js_api_cross_origin_chrome: browser_path = "$(WEB_RUNNER_DIR)/chrome/chrome-linux64/chrome"
+test_web_js_api_cross_origin_chrome: driver_path = "$(WEB_RUNNER_DIR)/chrome/chromedriver-linux64/chromedriver"
+test_web_js_api_cross_origin_chrome: browser_kind = chrome
+test_web_js_api_cross_origin_chrome: server_cmd = "npm run server:cross-origin"
+test_web_js_api_cross_origin_chrome: filter = ZeroKnowledgeTest # Only run zk proof tests in cross-origin mode
+
+.PHONY: test_web_js_api_cross_origin_chrome # Run tests for the web wasm api in cross-origin mode on Chrome
+test_web_js_api_cross_origin_chrome: run_web_js_api_cross_origin
+
+.PHONY: test_web_js_api_cross_origin_chrome_ci # Run tests for the web wasm api in cross-origin mode on Chrome
+test_web_js_api_cross_origin_chrome_ci: setup_venv
+	source ~/.nvm/nvm.sh && \
+	nvm install $(NODE_VERSION) && \
+	nvm use $(NODE_VERSION) && \
+	$(MAKE) test_web_js_api_cross_origin_chrome
+
+test_web_js_api_cross_origin_firefox: browser_path = "$(WEB_RUNNER_DIR)/firefox/firefox/firefox"
+test_web_js_api_cross_origin_firefox: driver_path = "$(WEB_RUNNER_DIR)/firefox/geckodriver"
+test_web_js_api_cross_origin_firefox: browser_kind = firefox
+test_web_js_api_cross_origin_firefox: server_cmd = "npm run server:cross-origin"
+test_web_js_api_cross_origin_firefox: filter = ZeroKnowledgeTest  # Only run zk proof tests in cross-origin mode
+
+.PHONY: test_web_js_api_cross_origin_firefox # Run tests for the web wasm api in cross-origin mode on Firefox
+test_web_js_api_cross_origin_firefox: run_web_js_api_cross_origin
+
+.PHONY: test_web_js_api_cross_origin_firefox_ci # Run tests for the web wasm api in cross-origin mode on Firefox
+test_web_js_api_cross_origin_firefox_ci: setup_venv
+	source ~/.nvm/nvm.sh && \
+	nvm install $(NODE_VERSION) && \
+	nvm use $(NODE_VERSION) && \
+	$(MAKE) test_web_js_api_cross_origin_firefox
+
+WASM_PAR_MQ_TEST_DIR=utils/wasm-par-mq/web_tests
+
+.PHONY: build_wasm_par_mq_tests # Build the wasm-par-mq test WASM package
+build_wasm_par_mq_tests: install_wasm_pack
+	cd $(WASM_PAR_MQ_TEST_DIR) && \
+	RUSTFLAGS="$(WASM_RUSTFLAGS)" wasm-pack build --target=web --out-dir pkg && \
+	find pkg/snippets -type f -iname worker_helpers.js -exec sed -i 's|import("../../..")|import("../../../wasm_par_mq_web_tests.js")|g' {} \;
+
+# This is an internal target, not meant to be called on its own.
+run_wasm_par_mq_tests: build_wasm_par_mq_tests setup_venv
+	cd $(WASM_PAR_MQ_TEST_DIR) && npm install && npm run build
+	source venv/bin/activate && \
+	python ci/webdriver.py \
+	--browser-path $(browser_path) \
+	--driver-path $(driver_path) \
+	--browser-kind $(browser_kind) \
+	--server-cmd "npm run server" \
+	--server-workdir "$(WASM_PAR_MQ_TEST_DIR)" \
+	--index-path "$(WASM_PAR_MQ_TEST_DIR)/index.html" \
+	--id-pattern Test
+
+test_wasm_par_mq_chrome: browser_path = "$(WEB_RUNNER_DIR)/chrome/chrome-linux64/chrome"
+test_wasm_par_mq_chrome: driver_path = "$(WEB_RUNNER_DIR)/chrome/chromedriver-linux64/chromedriver"
+test_wasm_par_mq_chrome: browser_kind = chrome
+
+.PHONY: test_wasm_par_mq_chrome # Run wasm-par-mq tests on Chrome
+test_wasm_par_mq_chrome: run_wasm_par_mq_tests
+
+.PHONY: test_wasm_par_mq_chrome_ci # Run wasm-par-mq tests on Chrome in CI
+test_wasm_par_mq_chrome_ci: setup_venv
+	source ~/.nvm/nvm.sh && \
+	nvm install $(NODE_VERSION) && \
+	nvm use $(NODE_VERSION) && \
+	$(MAKE) test_wasm_par_mq_chrome
+
+test_wasm_par_mq_firefox: browser_path = "$(WEB_RUNNER_DIR)/firefox/firefox/firefox"
+test_wasm_par_mq_firefox: driver_path = "$(WEB_RUNNER_DIR)/firefox/geckodriver"
+test_wasm_par_mq_firefox: browser_kind = firefox
+
+.PHONY: test_wasm_par_mq_firefox # Run wasm-par-mq tests on Firefox
+test_wasm_par_mq_firefox: run_wasm_par_mq_tests
+
+.PHONY: test_wasm_par_mq_firefox_ci # Run wasm-par-mq tests on Firefox in CI
+test_wasm_par_mq_firefox_ci: setup_venv
+	source ~/.nvm/nvm.sh && \
+	nvm install $(NODE_VERSION) && \
+	nvm use $(NODE_VERSION) && \
+	$(MAKE) test_wasm_par_mq_firefox
+
 .PHONY: no_tfhe_typo # Check we did not invert the h and f in tfhe
 no_tfhe_typo:
 	@./scripts/no_tfhe_typo.sh
@@ -1522,6 +1650,20 @@ bench_integer_compression_128b_gpu: install_rs_check_toolchain
 	--bench	glwe_packing_compression_128b-integer-bench \
 	--features=integer,internal-keycache,gpu,pbs-stats -p tfhe-benchmark --
 
+.PHONY: bench_integer_rerand # Run benchmarks for integer rerand
+bench_integer_rerand: install_rs_check_toolchain
+	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) \
+	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
+	--bench integer-rerand \
+	--features=integer,internal-keycache,pbs-stats -p tfhe-benchmark --
+
+.PHONY: bench_integer_rerand_gpu # Run benchmarks for integer rerand on GPU backend
+bench_integer_rerand_gpu: install_rs_check_toolchain
+	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) \
+	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
+	--bench integer-rerand \
+	--features=integer,internal-keycache,gpu,pbs-stats -p tfhe-benchmark --profile release_lto_off --
+
 .PHONY: bench_msm_zk
 bench_msm_zk: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) \
@@ -1529,13 +1671,15 @@ bench_msm_zk: install_rs_check_toolchain
 	--bench zk-msm \
 	--features=zk-pok -p tfhe-benchmark --profile release --
 
+# GPU benchmarks need --profile release for correct measurements
 .PHONY: bench_msm_zk_gpu
 bench_msm_zk_gpu: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) \
 	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
 	--bench zk-msm \
-	--features=gpu,gpu-experimental-zk,zk-pok -p tfhe-benchmark --profile release --
+	--features=gpu,gpu-experimental-zk,zk-pok -p tfhe-benchmark --profile release -- zk::cuda::msm
 
+# GPU benchmarks need --profile release for correct measurements
 .PHONY: bench_integer_zk_gpu
 bench_integer_zk_gpu: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) __TFHE_RS_BENCH_BIT_SIZES_SET=$(BIT_SIZES_SET) __TFHE_RS_BENCH_OP_FLAVOR=$(BENCH_OP_FLAVOR) \
@@ -1543,6 +1687,7 @@ bench_integer_zk_gpu: install_rs_check_toolchain
 	--bench integer-zk-pke \
 	--features=integer,internal-keycache,gpu,pbs-stats,zk-pok -p tfhe-benchmark --profile release --
 
+# GPU benchmarks need --profile release for correct measurements
 .PHONY: bench_integer_zk_experimental_gpu
 bench_integer_zk_experimental_gpu: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) __TFHE_RS_BENCH_BIT_SIZES_SET=$(BIT_SIZES_SET) __TFHE_RS_BENCH_OP_FLAVOR=$(BENCH_OP_FLAVOR) \
@@ -1726,37 +1871,37 @@ bench_web_js_api_parallel_firefox_ci: setup_venv
 	nvm use $(NODE_VERSION) && \
 	$(MAKE) bench_web_js_api_parallel_firefox
 
-bench_web_js_api_unsafe_coop_chrome: browser_path = "$(WEB_RUNNER_DIR)/chrome/chrome-linux64/chrome"
-bench_web_js_api_unsafe_coop_chrome: driver_path = "$(WEB_RUNNER_DIR)/chrome/chromedriver-linux64/chromedriver"
-bench_web_js_api_unsafe_coop_chrome: browser_kind = chrome
-bench_web_js_api_unsafe_coop_chrome: server_cmd = "npm run server:unsafe-coop"
-bench_web_js_api_unsafe_coop_chrome: filter = ZeroKnowledgeBench # Only bench zk with unsafe coop
+bench_web_js_api_cross_origin_chrome: browser_path = "$(WEB_RUNNER_DIR)/chrome/chrome-linux64/chrome"
+bench_web_js_api_cross_origin_chrome: driver_path = "$(WEB_RUNNER_DIR)/chrome/chromedriver-linux64/chromedriver"
+bench_web_js_api_cross_origin_chrome: browser_kind = chrome
+bench_web_js_api_cross_origin_chrome: server_cmd = "npm run server:cross-origin"
+bench_web_js_api_cross_origin_chrome: filter = ZeroKnowledgeBench # Only bench zk with cross-origin workers
 
-.PHONY: bench_web_js_api_unsafe_coop_chrome # Run benchmarks for the web wasm api without cross-origin isolation
-bench_web_js_api_unsafe_coop_chrome: run_web_js_api_parallel
+.PHONY: bench_web_js_api_cross_origin_chrome # Run benchmarks for the web wasm api without cross-origin isolation
+bench_web_js_api_cross_origin_chrome: run_web_js_api_cross_origin
 
-.PHONY: bench_web_js_api_unsafe_coop_chrome_ci # Run benchmarks for the web wasm api without cross-origin isolation
-bench_web_js_api_unsafe_coop_chrome_ci: setup_venv
+.PHONY: bench_web_js_api_cross_origin_chrome_ci # Run benchmarks for the web wasm api without cross-origin isolation
+bench_web_js_api_cross_origin_chrome_ci: setup_venv
 	source ~/.nvm/nvm.sh && \
 	nvm install $(NODE_VERSION) && \
 	nvm use $(NODE_VERSION) && \
-	$(MAKE) bench_web_js_api_unsafe_coop_chrome
+	$(MAKE) bench_web_js_api_cross_origin_chrome
 
-bench_web_js_api_unsafe_coop_firefox: browser_path = "$(WEB_RUNNER_DIR)/firefox/firefox/firefox"
-bench_web_js_api_unsafe_coop_firefox: driver_path = "$(WEB_RUNNER_DIR)/firefox/geckodriver"
-bench_web_js_api_unsafe_coop_firefox: browser_kind = firefox
-bench_web_js_api_unsafe_coop_firefox: server_cmd = "npm run server:unsafe-coop"
-bench_web_js_api_unsafe_coop_firefox: filter = ZeroKnowledgeBench # Only bench zk with unsafe coop
+bench_web_js_api_cross_origin_firefox: browser_path = "$(WEB_RUNNER_DIR)/firefox/firefox/firefox"
+bench_web_js_api_cross_origin_firefox: driver_path = "$(WEB_RUNNER_DIR)/firefox/geckodriver"
+bench_web_js_api_cross_origin_firefox: browser_kind = firefox
+bench_web_js_api_cross_origin_firefox: server_cmd = "npm run server:cross-origin"
+bench_web_js_api_cross_origin_firefox: filter = ZeroKnowledgeBench # Only bench zk with cross-origin workers
 
-.PHONY: bench_web_js_api_unsafe_coop_firefox # Run benchmarks for the web wasm api without cross-origin isolation
-bench_web_js_api_unsafe_coop_firefox: run_web_js_api_parallel
+.PHONY: bench_web_js_api_cross_origin_firefox # Run benchmarks for the web wasm api without cross-origin isolation
+bench_web_js_api_cross_origin_firefox: run_web_js_api_cross_origin
 
-.PHONY: bench_web_js_api_unsafe_coop_firefox_ci # Run benchmarks for the web wasm api without cross-origin isolation
-bench_web_js_api_unsafe_coop_firefox_ci: setup_venv
+.PHONY: bench_web_js_api_cross_origin_firefox_ci # Run benchmarks for the web wasm api without cross-origin isolation
+bench_web_js_api_cross_origin_firefox_ci: setup_venv
 	source ~/.nvm/nvm.sh && \
 	nvm install $(NODE_VERSION) && \
 	nvm use $(NODE_VERSION) && \
-	$(MAKE) bench_web_js_api_unsafe_coop_firefox
+	$(MAKE) bench_web_js_api_cross_origin_firefox
 
 .PHONY: bench_hlapi_unsigned # Run benchmarks for integer operations
 bench_hlapi_unsigned: install_rs_check_toolchain
@@ -1789,25 +1934,25 @@ bench_hlapi_hpu: install_rs_check_toolchain
 	--bench hlapi \
 	--features=integer,internal-keycache,hpu,hpu-v80,pbs-stats -p tfhe-benchmark --
 
-.PHONY: bench_hlapi_erc20 # Run benchmarks for ERC20 operations
-bench_hlapi_erc20: install_rs_check_toolchain
+.PHONY: bench_hlapi_erc7984 # Run benchmarks for ERC7984 operations
+bench_hlapi_erc7984: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) \
 	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
-	--bench hlapi-erc20 \
+	--bench hlapi-erc7984 \
 	--features=integer,internal-keycache,pbs-stats -p tfhe-benchmark --
 
-.PHONY: bench_hlapi_erc20_gpu # Run benchmarks for ERC20 operations on GPU
-bench_hlapi_erc20_gpu: install_rs_check_toolchain
+.PHONY: bench_hlapi_erc7984_gpu # Run benchmarks for ERC7984 operations on GPU
+bench_hlapi_erc7984_gpu: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) __TFHE_RS_PARAM_TYPE=$(BENCH_PARAM_TYPE) \
 	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
-	--bench hlapi-erc20 \
+	--bench hlapi-erc7984 \
 	--features=integer,gpu,internal-keycache,pbs-stats -p tfhe-benchmark --profile release_lto_off --
 
-.PHONY: bench_hlapi_erc20_gpu_classical # Run benchmarks for ERC20 operations on GPU with classical parameters
-bench_hlapi_erc20_gpu_classical: install_rs_check_toolchain
+.PHONY: bench_hlapi_erc7984_gpu_classical # Run benchmarks for ERC7984 operations on GPU with classical parameters
+bench_hlapi_erc7984_gpu_classical: install_rs_check_toolchain
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) __TFHE_RS_PARAM_TYPE=classical \
 	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
-	--bench hlapi-erc20 \
+	--bench hlapi-erc7984 \
 	--features=integer,gpu,internal-keycache,pbs-stats -p tfhe-benchmark --profile release_lto_off --
 
 .PHONY: bench_hlapi_dex # Run benchmarks for DEX operations
@@ -1831,13 +1976,13 @@ bench_hlapi_dex_gpu_classical: install_rs_check_toolchain
 	--bench hlapi-dex \
 	--features=integer,gpu,internal-keycache,pbs-stats -p tfhe-benchmark --profile release_lto_off --
 
-.PHONY: bench_hlapi_erc20_hpu # Run benchmarks for ECR20 operations on HPU
-bench_hlapi_erc20_hpu: install_rs_check_toolchain
+.PHONY: bench_hlapi_erc7984_hpu # Run benchmarks for ECR20 operations on HPU
+bench_hlapi_erc7984_hpu: install_rs_check_toolchain
 	source ./setup_hpu.sh --config $(HPU_CONFIG); \
 	export V80_PCIE_DEV=${V80_PCIE_DEV}; \
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) \
 	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
-	--bench hlapi-erc20 \
+	--bench hlapi-erc7984 \
 	--features=integer,internal-keycache,hpu,hpu-v80,pbs-stats -p tfhe-benchmark --
 
 .PHONY: bench_tfhe_zk_pok # Run benchmarks for the tfhe_zk_pok crate
@@ -1893,10 +2038,10 @@ bench_summary: install_rs_check_toolchain
 	--bench hlapi-noise-squash \
 	--features=integer,internal-keycache,pbs-stats -p tfhe-benchmark -- '::decomp_noise_squash_comp::'
 
-	# ERC20
+	# ERC7984
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) __TFHE_RS_PARAM_TYPE=$(BENCH_PARAM_TYPE) \
 	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
-	--bench hlapi-erc20 \
+	--bench hlapi-erc7984 \
 	--features=integer,internal-keycache -p tfhe-benchmark -- '::transfer::overflow'
 
 	# DEX
@@ -1938,10 +2083,10 @@ bench_summary_gpu: install_rs_check_toolchain
 	--bench hlapi-noise-squash \
 	--features=integer,gpu,internal-keycache,pbs-stats -p tfhe-benchmark --profile release_lto_off -- '::decomp_noise_squash_comp::'
 
-	# ERC20
+	# ERC7984
 	RUSTFLAGS="$(RUSTFLAGS)" __TFHE_RS_BENCH_TYPE=$(BENCH_TYPE) __TFHE_RS_PARAM_TYPE=$(BENCH_PARAM_TYPE) \
 	cargo $(CARGO_RS_CHECK_TOOLCHAIN) bench \
-	--bench hlapi-erc20 \
+	--bench hlapi-erc7984 \
 	--features=integer,gpu,internal-keycache -p tfhe-benchmark --profile release_lto_off -- '::transfer::overflow'
 
 	# DEX
@@ -2034,6 +2179,10 @@ write_params_to_file: install_rs_check_toolchain
 pull_backward_compat_data:
 	./scripts/pull_lfs_data.sh $(BACKWARD_COMPAT_DATA_DIR)
 
+.PHONY: pull_corrupted_inputs_data # Pull the data files needed for corrupted inputs deserialization tests
+pull_corrupted_inputs_data:
+	./scripts/pull_lfs_data.sh $(CORRUPTED_INPUTS_TEST)
+
 .PHONY: pull_hpu_files # Pull the hpu files
 pull_hpu_files:
 	./scripts/pull_lfs_data.sh backends/tfhe-hpu-backend/
@@ -2097,6 +2246,7 @@ pcc_batch_2:
 	$(call run_recipe_with_details,check_fmt_js)  # This needs to stay there, CI pipeline rely on this recipe to conditionally install Node
 	$(call run_recipe_with_details,clippy_test_vectors)
 	$(call run_recipe_with_details,check_test_vectors)
+	$(call run_recipe_with_details,clippy_wasm_par_mq)
 
 .PHONY: pcc_batch_3 # duration: 6'50''
 pcc_batch_3:
@@ -2123,8 +2273,10 @@ pcc_batch_6:
 	$(call run_recipe_with_details,clippy_tasks)
 	$(call run_recipe_with_details,clippy_tfhe_csprng)
 	$(call run_recipe_with_details,clippy_zk_pok)
+	$(call run_recipe_with_details,clippy_zk_pok_wasm)
 	$(call run_recipe_with_details,clippy_trivium)
 	$(call run_recipe_with_details,clippy_versionable)
+	$(call run_recipe_with_details,clippy_safe_serialize)
 	$(call run_recipe_with_details,clippy_param_dedup)
 	$(call run_recipe_with_details,docs)
 
@@ -2344,4 +2496,11 @@ bench_ntt: install_rs_check_toolchain
 
 .PHONY: help # Generate list of targets with descriptions
 help:
-	@grep '^\.PHONY: .* #' Makefile | sed 's/\.PHONY: \(.*\) # \(.*\)/\1\t\2/' | expand -t30 | sort
+	@for f in Makefile $$(grep '^include ' Makefile | awk '{print $$2}'); do \
+		matches=$$(grep '^\.PHONY: .* #' "$$f" || true); \
+		if [ -n "$$matches" ]; then \
+			echo ""; \
+			echo "--- $$f ---"; \
+			echo "$$matches" | sed 's/\.PHONY: \(.*\) # \(.*\)/\1\t\2/' | expand -t30 | sort; \
+		fi \
+	done

_typos.toml

@@ -15,12 +15,3 @@ extend-ignore-identifiers-re = [
     "0x[0-9a-fA-F]+",
     "xrt_coreutil",
 ]
-
-[files]
-extend-exclude = [
-    "backends/tfhe-cuda-backend/cuda/src/fft128/twiddles.cu",
-    "backends/tfhe-cuda-backend/cuda/src/fft/twiddles.cu",
-    "backends/tfhe-hpu-backend/config_store/**/*.link_summary",
-    "*.cbor",
-    "*.bcode",
-]

apps/test-vectors/checksums.sha256

@@ -1,36 +1,36 @@
-08f31a47c29cc4d72ad32c0b5411fa20b3deef5b84558dd2fb892d3cdf90528a  data/toy_params/glwe_after_id_br_karatsuba.cbor
-29b6e3e7d27700004b70dca24d225816500490e2d6ee49b9af05837fd421896b  data/valid_params_128/lwe_after_spec_pbs.cbor
-2c70d1d78cc3760733850a353ace2b9c4705e840141b75841739e90e51247e18  data/valid_params_128/small_lwe_secret_key.cbor
-2fb4bb45c259b8383da10fc8f9459c40a6972c49b1696eb107f0a75640724be5  data/toy_params/lwe_after_id_pbs_karatsuba.cbor
-36c9080b636475fcacca503ce041bbfeee800fd3e1890dee559ea18defff9fe8  data/toy_params/glwe_after_id_br.cbor
-377761beeb4216cf5aa2624a8b64b8259f5a75c32d28e850be8bced3a0cdd6f5  data/toy_params/ksk.cbor
-59dba26d457f96478eda130cab5301fce86f23c6a8807de42f2a1e78c4985ca7  data/valid_params_128/lwe_ks.cbor
-5d80dd93fefae4f4f89484dfcd65bbe99cc32e7e3b0a90c33dd0d77516c0a023  data/valid_params_128/glwe_after_id_br_karatsuba.cbor
-656f0009c7834c5bcb61621e222047516054b9bc5d0593d474ab8f1c086b67a6  data/valid_params_128/lwe_after_id_pbs.cbor
-699580ca92b9c2f9e1f57fb1e312c9e8cb29714f7acdef9d2ba05f798546751f  data/toy_params/lwe_sum.cbor
-6e54ab41056984595b077baff70236d934308cf5c0c33b4482fbfb129b3756c6  data/valid_params_128/glwe_after_id_br.cbor
-70f5e5728822de05b49071efb5ec28551b0f5cc87aa709a455d8e7f04b9c96ee  data/toy_params/lwe_after_id_pbs.cbor
-76a5c52cab7fec1dc167da676c6cd39479cda6b2bb9f4e0573cb7d99c2692faa  data/valid_params_128/lwe_after_id_pbs_karatsuba.cbor
-7cc6803f5fbc3d5a1bf597f2b979ce17eecd3d6baca12183dea21022a7b65c52  data/toy_params/bsk.cbor
-7f3c40a134623b44779a556212477fea26eaed22450f3b6faeb8721d63699972  data/valid_params_128/lwe_sum.cbor
-837b3bd3245d4d0534ed255fdef896fb4fa6998a258a14543dfdadd0bfc9b6dd  data/toy_params/lwe_prod.cbor
-9ece8ca9c1436258b94e8c5e629b8722f9b18fdd415dd5209b6167a9dde8491c  data/toy_params/glwe_after_spec_br_karatsuba.cbor
-aa44aea29efd6d9e4d35a21a625d9cba155672e3f7ed3eddee1e211e62ad146b  data/valid_params_128/lwe_ms.cbor
-b7a037b9eaa88d6385167579b93e26a0cb6976d9b8967416fd1173e113bda199  data/valid_params_128/large_lwe_secret_key.cbor
-b7b8e3586128887bd682120f3e3a43156139bce5e3fe0b03284f8753a864d647  data/toy_params/lwe_after_spec_pbs_karatsuba.cbor
-bd00a8ae7494e400de5753029552ee1647efe7e17409b863a26a13b081099b8c  data/toy_params/lwe_after_spec_pbs.cbor
-c6df98676de04fe54b5ffc2eb30a82ebb706c9d7d5a4e0ed509700fec88761f7  data/toy_params/lwe_ms.cbor
-c7d5a864d5616a7d8ad50bbf40416e41e6c9b60c546dc14d4aa8fc40a418baa7  data/toy_params/large_lwe_secret_key.cbor
-c806533b325b1009db38be2f9bef5f3b2fad6b77b4c71f2855ccc9d3b4162e98  data/valid_params_128/lwe_b.cbor
-c9eb75bd2993639348a679cf48c06e3c38d1a513f48e5b0ce0047cea8cff6bbc  data/toy_params/lwe_a.cbor
-d3391969acf26dc69de0927ba279139d8d79999944069addc8ff469ad6c5ae2d  data/valid_params_128/lwe_after_spec_pbs_karatsuba.cbor
-d6da5baef0e787f6be56e218d8354e26904652602db964844156fdff08350ce6  data/toy_params/lwe_ks.cbor
-e591ab9af1b6a0aede273f9a3abb65a4c387feb5fa06a6959e9314058ca0f7e5  data/valid_params_128/ksk.cbor
-e59b002df3a9b01ad321ec51cf076fa35131ab9dbef141d1c54b717d61426c92  data/valid_params_128/glwe_after_spec_br_karatsuba.cbor
-e628354c81508a2d888016e8282df363dd12f1e19190b6475d4eb9d7ab8ae007  data/valid_params_128/glwe_after_spec_br.cbor
-e69d2d2c064fc8c0460b39191ca65338146990349954f5ec5ebd01d93610e7eb  data/valid_params_128/lwe_a.cbor
-e76c24b2a0c9a842ad13dda35473c2514f9e7d20983b5ea0759c4521a91626d9  data/valid_params_128/lwe_prod.cbor
-e9afe7019acba5cda926f13e06df9930571611729d2f2e8ce41956e1f5e1db6f  data/valid_params_128/bsk.cbor
-eadf2eff35133ffba075df11faecddd6e7af9ddc398011ec4568e5528812b3e2  data/toy_params/lwe_b.cbor
-ee9fcf45f1379ca3a7d7bf2b0e7a1cc920ceb496c0217e8604b0b58d2831749e  data/toy_params/small_lwe_secret_key.cbor
-f7a89ac440def1c8aa3f42ecc41813632509df38cd4544d1a507711831e629bd  data/toy_params/glwe_after_spec_br.cbor
+09066e9051cb11cd3fa820fe70daba41652dfd8ba7aec1e62deb592e8d422c73  data/valid_params_128/ksk.cbor
+0bcca92c6208519ddec6d618ecc7e77b9b35d30e55588863bc6e4576ced1a010  data/valid_params_128/lwe_sum.cbor
+11d970a504709f4375cbdce717c57e7292f0deb8de1e5ce5b0ddfec86d0ff0c4  data/valid_params_128/lwe_b.cbor
+177f09db39a165a1a3b3e528047e48ad2fdef61dce93a5e3ef67625ef3e23d16  data/valid_params_128/small_lwe_secret_key.cbor
+1a376b04dea2cc29ba2569bd4be13fb00523f85cb4ec1400f3c6cea8827d312e  data/toy_params/small_lwe_secret_key.cbor
+1a4e0747a7cda547a99a2512b036dc21ced461f1ad8680cce6e7f6a91159d68c  data/toy_params/glwe_after_id_br.cbor
+26317e8430c703ce6d82e0b61237a51fabbcd11f52838aef40108777a08b0037  data/toy_params/lwe_after_spec_pbs.cbor
+2f64e6eccd4ddcc7cb2e76844ae869559bcf0c1c2b73a6ff9c7cade02f55dab0  data/valid_params_128/lwe_ks.cbor
+316d04542ba422bf82854c1c53a95d201ba042e12ad31476772a4755620f4e8d  data/valid_params_128/lwe_after_spec_pbs.cbor
+346995d4ac20031338826503173812ff04eac52d15eeb6c93636f6fa6f1b07a5  data/valid_params_128/bsk.cbor
+38f7f0ca6251c5139aaf16121797ae7b25f189ba64ea6ce3a365193cb103bc49  data/toy_params/lwe_prod.cbor
+40a07b2f42e2b7a8f6f90ea61568158a0273476bfea69b8b4907269b952f5d5c  data/valid_params_128/lwe_a.cbor
+534f9e3bb24d4ecbf7447c0e937f5df4840b70d9fcff7ffc6610dae71e7bff88  data/toy_params/large_lwe_secret_key.cbor
+53eb223855483465ab50fe0ea1a9ef39cdb47be2e5544928ec2343d942c78554  data/valid_params_128/lwe_after_id_pbs.cbor
+5593ae368d8fd8a3126433174fd896777ea45b1a92ae8379151de0fed5e5a4e1  data/toy_params/bsk.cbor
+632ef8130037896623de9478469d6ccd8298a6b73ec4f2bdc871f8c0adc1e71c  data/toy_params/lwe_b.cbor
+632fc4b7ad17b40183fca92524b9c21b2adcfbcff3d28f2559959ab740b18bcb  data/valid_params_128/glwe_after_spec_br.cbor
+6597867705cbd69bd3695fb70608c04e1feb96e9b1e242137cefbb8b9d67c25e  data/toy_params/lwe_after_spec_pbs_karatsuba.cbor
+6601d34dde7487630bcecef306f8aa6cba3f7850a6b338e03c6474d4de673da6  data/toy_params/glwe_after_spec_br_karatsuba.cbor
+70ab63fe9e1947dd3c95cd7e7d377025146fbefa3ef34dc72727f10d80d0b454  data/valid_params_128/glwe_after_id_br_karatsuba.cbor
+7400f815f147227fa6ff86898dc875d5e523572c9baaa96a2d6f90189ad14e72  data/valid_params_128/glwe_after_spec_br_karatsuba.cbor
+77837989606579e3bba52382fee3f218f552df82c5b101b79fe4f83bec714d72  data/valid_params_128/lwe_ms.cbor
+7cb3f6f4fd17875baa6bff5f3a5da9af554c89f4932587accfcad7181c31e4b7  data/valid_params_128/large_lwe_secret_key.cbor
+96b66c6d8370e89fd6fecdec70dbc872c749614ca82ed0a3779188c09c08a1db  data/toy_params/glwe_after_id_br_karatsuba.cbor
+a13f573a0fd90065c193002bb2a509ca7a6fdac24c6bee1da95a99e1e9217ee1  data/toy_params/lwe_a.cbor
+a5227e552c7a853c121ce1bb7e371596b2e4594206024e7a7232ab65216b9472  data/toy_params/lwe_ks.cbor
+b8e5075efb58464192319bcb847cc6b3f77942fc07c768e0972f5bf77043a4c5  data/valid_params_128/lwe_after_spec_pbs_karatsuba.cbor
+ba4058987c3635934e759b572d34c1be4edc40939c23192e1776e91afacd69a3  data/valid_params_128/glwe_after_id_br.cbor
+bb52f8c2493c253ed4a4837126e8ad1fe231bf122c4042afd8f71b9ae5fecbd1  data/toy_params/lwe_sum.cbor
+c393d1b4ac5f093f8ace128e656a9ff520e3b6e4448c3dcde8054291908bcbd0  data/toy_params/lwe_after_id_pbs_karatsuba.cbor
+d55a4f0c0ab7794ae9c5d178b72ea97d383a6078cab47bbba83e654702e96885  data/valid_params_128/lwe_after_id_pbs_karatsuba.cbor
+db51aa1b96120c8c41364368247643d85fb35d2db66468514ddf8f25cf8bf1f4  data/toy_params/lwe_after_id_pbs.cbor
+f25cfa0e64b04a39ef11a14fd5de3f5fc82fdc0b8511c91e66183cb309811808  data/toy_params/glwe_after_spec_br.cbor
+f5f4fcc754e2186db0580049093321a37d9de244cfaace9e1b926e1560f20b58  data/valid_params_128/lwe_prod.cbor
+fc690226cca294153b1dc65833e95ba66b837aff87cbb2ef211729d9232b30d3  data/toy_params/ksk.cbor
+fd2e004e4385ed45af7b68f76f8741348a1b94a5c9c28cb6d3642733c0132b9c  data/toy_params/lwe_ms.cbor

apps/test-vectors/data/toy_params/bsk.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:7cc6803f5fbc3d5a1bf597f2b979ce17eecd3d6baca12183dea21022a7b65c52
+oid sha256:5593ae368d8fd8a3126433174fd896777ea45b1a92ae8379151de0fed5e5a4e1
 size 92291

apps/test-vectors/data/toy_params/glwe_after_id_br.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:36c9080b636475fcacca503ce041bbfeee800fd3e1890dee559ea18defff9fe8
+oid sha256:1a4e0747a7cda547a99a2512b036dc21ced461f1ad8680cce6e7f6a91159d68c
 size 4679

apps/test-vectors/data/toy_params/glwe_after_id_br_karatsuba.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:08f31a47c29cc4d72ad32c0b5411fa20b3deef5b84558dd2fb892d3cdf90528a
+oid sha256:96b66c6d8370e89fd6fecdec70dbc872c749614ca82ed0a3779188c09c08a1db
 size 4679

apps/test-vectors/data/toy_params/glwe_after_spec_br.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:f7a89ac440def1c8aa3f42ecc41813632509df38cd4544d1a507711831e629bd
+oid sha256:f25cfa0e64b04a39ef11a14fd5de3f5fc82fdc0b8511c91e66183cb309811808
 size 4679

apps/test-vectors/data/toy_params/glwe_after_spec_br_karatsuba.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:9ece8ca9c1436258b94e8c5e629b8722f9b18fdd415dd5209b6167a9dde8491c
+oid sha256:6601d34dde7487630bcecef306f8aa6cba3f7850a6b338e03c6474d4de673da6
 size 4679

apps/test-vectors/data/toy_params/ksk.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:377761beeb4216cf5aa2624a8b64b8259f5a75c32d28e850be8bced3a0cdd6f5
+oid sha256:fc690226cca294153b1dc65833e95ba66b837aff87cbb2ef211729d9232b30d3
 size 25451

apps/test-vectors/data/toy_params/large_lwe_secret_key.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:c7d5a864d5616a7d8ad50bbf40416e41e6c9b60c546dc14d4aa8fc40a418baa7
+oid sha256:534f9e3bb24d4ecbf7447c0e937f5df4840b70d9fcff7ffc6610dae71e7bff88
 size 265

apps/test-vectors/data/toy_params/lwe_a.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:c9eb75bd2993639348a679cf48c06e3c38d1a513f48e5b0ce0047cea8cff6bbc
+oid sha256:a13f573a0fd90065c193002bb2a509ca7a6fdac24c6bee1da95a99e1e9217ee1
 size 2365

apps/test-vectors/data/toy_params/lwe_after_id_pbs.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:70f5e5728822de05b49071efb5ec28551b0f5cc87aa709a455d8e7f04b9c96ee
+oid sha256:db51aa1b96120c8c41364368247643d85fb35d2db66468514ddf8f25cf8bf1f4
 size 2365

apps/test-vectors/data/toy_params/lwe_after_id_pbs_karatsuba.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:2fb4bb45c259b8383da10fc8f9459c40a6972c49b1696eb107f0a75640724be5
+oid sha256:c393d1b4ac5f093f8ace128e656a9ff520e3b6e4448c3dcde8054291908bcbd0
 size 2365

apps/test-vectors/data/toy_params/lwe_after_spec_pbs.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:bd00a8ae7494e400de5753029552ee1647efe7e17409b863a26a13b081099b8c
+oid sha256:26317e8430c703ce6d82e0b61237a51fabbcd11f52838aef40108777a08b0037
 size 2365

apps/test-vectors/data/toy_params/lwe_after_spec_pbs_karatsuba.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:b7b8e3586128887bd682120f3e3a43156139bce5e3fe0b03284f8753a864d647
+oid sha256:6597867705cbd69bd3695fb70608c04e1feb96e9b1e242137cefbb8b9d67c25e
 size 2365

apps/test-vectors/data/toy_params/lwe_b.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:eadf2eff35133ffba075df11faecddd6e7af9ddc398011ec4568e5528812b3e2
+oid sha256:632ef8130037896623de9478469d6ccd8298a6b73ec4f2bdc871f8c0adc1e71c
 size 2365

apps/test-vectors/data/toy_params/lwe_ks.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:d6da5baef0e787f6be56e218d8354e26904652602db964844156fdff08350ce6
+oid sha256:a5227e552c7a853c121ce1bb7e371596b2e4594206024e7a7232ab65216b9472
 size 149

apps/test-vectors/data/toy_params/lwe_ms.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:c6df98676de04fe54b5ffc2eb30a82ebb706c9d7d5a4e0ed509700fec88761f7
-size 143
+oid sha256:fd2e004e4385ed45af7b68f76f8741348a1b94a5c9c28cb6d3642733c0132b9c
+size 151

apps/test-vectors/data/toy_params/lwe_prod.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:837b3bd3245d4d0534ed255fdef896fb4fa6998a258a14543dfdadd0bfc9b6dd
+oid sha256:38f7f0ca6251c5139aaf16121797ae7b25f189ba64ea6ce3a365193cb103bc49
 size 2365

apps/test-vectors/data/toy_params/lwe_sum.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:699580ca92b9c2f9e1f57fb1e312c9e8cb29714f7acdef9d2ba05f798546751f
+oid sha256:bb52f8c2493c253ed4a4837126e8ad1fe231bf122c4042afd8f71b9ae5fecbd1
 size 2365

apps/test-vectors/data/toy_params/small_lwe_secret_key.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:ee9fcf45f1379ca3a7d7bf2b0e7a1cc920ceb496c0217e8604b0b58d2831749e
+oid sha256:1a376b04dea2cc29ba2569bd4be13fb00523f85cb4ec1400f3c6cea8827d312e
 size 17

apps/test-vectors/data/valid_params_128/bsk.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:e9afe7019acba5cda926f13e06df9930571611729d2f2e8ce41956e1f5e1db6f
+oid sha256:346995d4ac20031338826503173812ff04eac52d15eeb6c93636f6fa6f1b07a5
 size 61415556

apps/test-vectors/data/valid_params_128/glwe_after_id_br.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:6e54ab41056984595b077baff70236d934308cf5c0c33b4482fbfb129b3756c6
+oid sha256:ba4058987c3635934e759b572d34c1be4edc40939c23192e1776e91afacd69a3
 size 36935

apps/test-vectors/data/valid_params_128/glwe_after_id_br_karatsuba.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:5d80dd93fefae4f4f89484dfcd65bbe99cc32e7e3b0a90c33dd0d77516c0a023
+oid sha256:70ab63fe9e1947dd3c95cd7e7d377025146fbefa3ef34dc72727f10d80d0b454
 size 36935

apps/test-vectors/data/valid_params_128/glwe_after_spec_br.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:e628354c81508a2d888016e8282df363dd12f1e19190b6475d4eb9d7ab8ae007
+oid sha256:632fc4b7ad17b40183fca92524b9c21b2adcfbcff3d28f2559959ab740b18bcb
 size 36935

apps/test-vectors/data/valid_params_128/glwe_after_spec_br_karatsuba.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:e59b002df3a9b01ad321ec51cf076fa35131ab9dbef141d1c54b717d61426c92
+oid sha256:7400f815f147227fa6ff86898dc875d5e523572c9baaa96a2d6f90189ad14e72
 size 36935

apps/test-vectors/data/valid_params_128/ksk.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:e591ab9af1b6a0aede273f9a3abb65a4c387feb5fa06a6959e9314058ca0f7e5
+oid sha256:09066e9051cb11cd3fa820fe70daba41652dfd8ba7aec1e62deb592e8d422c73
 size 76861550

apps/test-vectors/data/valid_params_128/large_lwe_secret_key.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:b7a037b9eaa88d6385167579b93e26a0cb6976d9b8967416fd1173e113bda199
+oid sha256:7cb3f6f4fd17875baa6bff5f3a5da9af554c89f4932587accfcad7181c31e4b7
 size 2057

apps/test-vectors/data/valid_params_128/lwe_a.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:e69d2d2c064fc8c0460b39191ca65338146990349954f5ec5ebd01d93610e7eb
+oid sha256:40a07b2f42e2b7a8f6f90ea61568158a0273476bfea69b8b4907269b952f5d5c
 size 18493

apps/test-vectors/data/valid_params_128/lwe_after_id_pbs.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:656f0009c7834c5bcb61621e222047516054b9bc5d0593d474ab8f1c086b67a6
+oid sha256:53eb223855483465ab50fe0ea1a9ef39cdb47be2e5544928ec2343d942c78554
 size 18493

apps/test-vectors/data/valid_params_128/lwe_after_id_pbs_karatsuba.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:76a5c52cab7fec1dc167da676c6cd39479cda6b2bb9f4e0573cb7d99c2692faa
+oid sha256:d55a4f0c0ab7794ae9c5d178b72ea97d383a6078cab47bbba83e654702e96885
 size 18493

apps/test-vectors/data/valid_params_128/lwe_after_spec_pbs.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:29b6e3e7d27700004b70dca24d225816500490e2d6ee49b9af05837fd421896b
+oid sha256:316d04542ba422bf82854c1c53a95d201ba042e12ad31476772a4755620f4e8d
 size 18493

apps/test-vectors/data/valid_params_128/lwe_after_spec_pbs_karatsuba.cbor

@@ -1,3 +1,3 @@
 version https://git-lfs.github.com/spec/v1
-oid sha256:d3391969acf26dc69de0927ba279139d8d79999944069addc8ff469ad6c5ae2d
+oid sha256:b8e5075efb58464192319bcb847cc6b3f77942fc07c768e0972f5bf77043a4c5
 size 18493