docs: update wsl installation procedure (#9968)

This is a 🔦 documentation change.

## Summary

The install documentation for WSL offers to install Ruby through
BrightBox. However, BrightBox does not support Ubuntu Jammy (which is
the default for latest WSL builds). Instead, this commit just redirects
the WSL user to the Ubuntu installation procedure to avoid duplicate
documentation.

.devcontainer/Dockerfile

@@ -3,7 +3,7 @@
 # Licensed under the MIT License. See https://go.microsoft.com/fwlink/?linkid=2090316 for license information.
 #-------------------------------------------------------------------------------------------------------------
 
-FROM ruby:2
+FROM ruby:3.0
 
 # Avoid warnings by switching to noninteractive
 ENV DEBIAN_FRONTEND=noninteractive
@@ -28,7 +28,7 @@ RUN apt-get update \
     #
     # Install node.js
     && apt-get -y install curl software-properties-common \
-    && curl -sL https://deb.nodesource.com/setup_13.x | bash - \
+    && curl -sL https://deb.nodesource.com/setup_18.x | bash - \
     && apt-get -y install nodejs \
     #
     # Create a non-root user to use if preferred - see https://aka.ms/vscode-remote/containers/non-root-user.

.devcontainer/devcontainer.json

@@ -1,7 +1,7 @@
 // For format details, see https://aka.ms/vscode-remote/devcontainer.json or this file's README at:
 // https://github.com/microsoft/vscode-dev-containers/tree/v0.101.1/containers/ruby-2
 {
-	"name": "Ruby 2",
+	"name": "Ruby 3",
 	"dockerFile": "Dockerfile",
 
 	// Set *default* container specific settings.json values on container create.
@@ -12,15 +12,15 @@
 	// Add the IDs of extensions you want installed when the container is created.
 	"extensions": [
 		"rebornix.Ruby"
-	]
+	],
 	
 	// Use 'forwardPorts' to make a list of ports inside the container available locally.
 	// "forwardPorts": [],
 
 	// Use 'postCreateCommand' to run commands after the container is created.
-	"postCreateCommand": "bundle install",
+	"postCreateCommand": "bundle install"
 
 	// Uncomment to connect as a non-root user. See https://aka.ms/vscode-remote/containers/non-root.
 	// "remoteUser": "vscode"
 
-}
+}

.github/SECURITY.markdown

@@ -2,13 +2,13 @@
 
 ## Supported Versions
 
-Security updates are applied to the latest MINOR version of Jekyll, and the version used by GitHub Pages, v3.9.x.
+Security updates are applied to the latest MINOR version of Jekyll, and the version used by GitHub Pages, v3.10.x.
 
 | Version | Supported          |
 | ------- | ------------------ |
-| 4.2.x   | :white_check_mark: |
-| 3.9.x   | :white_check_mark: |
-| < 3.9.x | :x:                |
+| 4.4.x   | :white_check_mark: |
+| 3.10.x   | :white_check_mark: |
+| < 3.10.x | :x:                |
 
 ## Reporting a Vulnerability
 

.github/actions/spelling/allow.txt

@@ -1,4 +1,5 @@
-built-ins
+azion
+builtins
 github
 hakiri
 https
@@ -7,6 +8,7 @@ Microsoft
 ssh
 Statictastic
 statictastic
+supranode
 ubuntu
 Wikipedia
 workaround

.github/actions/spelling/expect.txt

@@ -1,55 +1,31 @@
-acl
-activesupport
 adaoraul
-addons
-aeiou
 AFile
 afterall
 Alexey
 alfredxing
-algolia
-allowfullscreen
 Anatoliy
 andreyvit
 Ankit
 Anning
-apps
 appveyor
 arengu
-args
 ariejan
-arounds
 asciinema
 asdf
 ashmaroli
-attr
 Autobuild
-autocompletion
-autogenerated
-Autolink
-autoload
 autoreconf
-autosave
 awood
-aws
 awscli
-backend
-backport
-backtick
 backticks
 barcamp
-baseurl
-bashrc
-baz
 bbatsov
 bdimcheff
 bellvat
 benbalter
 Beney
 binstubs
-bip
 bitbucket
-blog
 Blogger
 blogging
 blogs
@@ -63,7 +39,6 @@ brightbox
 brighterplanet
 buddyworks
 builtatlightspeed
-Bugfix
 Burela
 byparker
 cachegrind
@@ -73,19 +48,11 @@ cartera
 cavalle
 CDNs
 cgi
-changefreq
-changelog
 chango
-charset
 Chayoung
-chcp
-chdir
 Cheatsheet
 Checkoway
-chmod
-chown
 Chrononaut
-chruby
 cibuild
 cimg
 circleci
@@ -95,105 +62,63 @@ cloudcannon
 Cloudinary
 cloudsh
 CLT
-codebase
 codeclimate
 CODEOWNERS
 coderay
 codeslinger
-coffeescript
 colorator
-commandline
 commonmark
-compat
 compatibilize
-concat
-config
 configyml
 contentblocks
-CORS
 Cov
 CRLFs
-cron
-crontab
 cruft
-css
-csv
 Currin
-CVE
-CWD
 cygwin
 daringfireball
 Dassonville
 datafiles
-datetime
 DCEU
 Debian
-debuggability
 defunkt
 delegators
-dependabot
-deployer
-deps
-dest
-Devkit
-devops
+devcontainer
 digitalocean
-dirs
 disqus
 ditaa
 dnf
 doclist
-doctype
 doeorg
 dommmel
 dotfile
 Dousse
-downcase
-downcased
 duckduckgo
 duritong
 Dusseau
 dysinger
 ecf
-editorconfig
 eduardoboucas
-Elasticsearch
-elsif
 Emacs
-emails
-emoji
+emojis
 endcapture
-endcomment
-endfor
-endhighlight
-endif
 endraw
 endrender
 endtablerow
 Enumerables
-EOL
 erb
 errordocument
 Espinaco
 eugenebolshakov
 evaled
-exe
-execjs
-extensionpack
-extname
 extnames
 exts
-favicon
 Fengyun
 ffi
-figcaption
-filesystem
 Finazzo
 firstimage
-FIXME
 flakey
 flickr
-fnmatch
 fontello
 forloop
 formcake
@@ -204,87 +129,47 @@ formkeep
 formspark
 formspree
 formx
-Forwardable
-frameborder
 freenode
-frontend
-frontmatter
 fsnotify
-ftp
 fullstory
 Gaudino
 gcc
 gcnovus
 gemfile
-gemset
-gemspec
 getform
 getset
 getsimpleform
 gettalong
-gfm
 ghp
 ghpages
 giraffeacademy
-github
 githubcom
-githubusercontent
-gitignore
 gitlab
 gjtorikian
 globbed
-globbing
-google
 gotcha
 Goulven
 gridism
 GSo
-gsub
 gsubbing
-Hakiri
-hardcode
 hashbang
-hashmap
-helaili
 henrik
-heredoc
 heroku
-highlighter
 hilighting
 Hoizey
-homepage
 hostman
-hostname
-href
-htaccess
-htm
-html
 htmlproofer
-http
-httpd
-httpdocs
-hyperlinks
 Iaa
 ial
-ico
-icomoon
 iconset
 ified
-iframe
-img
-Impl
-Inlining
 invokables
-irc
 ivey
 ize
 jalali
-jameshamann
 jamstackthemes
 jan
-javascript
 Jax
-jayferd
 jcon
 jdoe
 jeffreytse
@@ -294,25 +179,20 @@ jekyllbot
 jekyllconf
 Jekyllers
 Jekyllin
-Jekylling
 jekyllized
 jekylllayoutconcept
 jekyllrb
 jekyllthemes
+jekyllup
 jemoji
 jmcglone
-jneen
 johnreilly
-jpg
 jqr
-jruby
-json
 jsonify
 juretta
 jwarby
 Kacper
 Kasberg
-kbd
 Kentico
 Kewin
 keycdn
@@ -328,40 +208,23 @@ kramdown
 Kulig
 Kwokfu
 Lamprecht
-laquo
-lastmod
 launchctl
 launchy
 laurilehmijoki
-ldquo
 learnxinyminutes
-lexer
-LGTM
-libcurl
-libffi
-lifecycle
-lightgray
-limjh
+lexers
 linenos
 linkify
-linux
 liufengyun
-livereload
 localheinz
-localhost
-localtime
 Locher
-loglevel
 Losslessly
 lovin
 lsi
-lsquo
 lstrip
 lyche
-macos
 macromates
 mademistakes
-mailto
 Manmeet
 markdownify
 Maroli
@@ -372,43 +235,26 @@ mathml
 mattr
 Maximiliano
 mchung
-mdash
 memberspace
-Memoize
-memoized
-memoizing
 mentoring
 mergable
 Mertcan
 mertkahyaoglu
-metadata
 metadatas
 microdata
-microsoft
-mimetype
-mingw
 minibundle
-minifier
-minitest
 Mittal
-mixin
 mkasberg
 mkd
-mkdir
 mkdn
 mkdown
-mmistakes
 modernizr
 mojombo
 moncefbelyamani
 moz
 mreid
-msdn
 mswin
 MSYS
-mtime
-multiline
-munging
 Mvvm
 myblog
 mycontent
@@ -419,47 +265,31 @@ mypage
 myposts
 myproject
 myrepo
-mysite
 myvalue
 myvar
-myvariable
 Nadjib
 nakanishi
-namespace
-namespaced
-navbar
 navbars
-nbsp
 nearlyfreespeech
 nethack
 netlify
-netlifycms
 Neue
 nginx
 ngx
 nielsenramon
-nior
-nodejs
 noifniof
-nokogiri
 notextile
-onclick
 onebox
 oneclick
-onschedule
 opensource
-openssl
 Optim
 orderofinterpretation
-orgs
 OSVDB
 osx
 packagecontrol
 pacman
-paginator
 pandoc
 pantulis
-params
 parkr
 parseable
 paspagon
@@ -467,130 +297,79 @@ passthrough
 pathawks
 Pathutil
 paywall
-pdf
 PDFs
 Pelykh
-permalink
-PHP
 pinboard
 Piwigo
 pjhyett
 pkill
 pkpass
-placeholders
 planetjekyll
 plantuml
-plugin
-png
 podcasts
-popen
 Porcel
 Posterous
 postfiles
-postlayout
 postmodern
-prefetching
 preinstalled
-prepends
 Prioritise
 Probot
 projectlist
 pubstorm
 pufuwozu
-pwa
-pwd
 pygments
 qrush
 Quaid
-quickstart
 rackup
-Rakefile
-raquo
 razorops
-rbenv
 rdiscount
-rdoc
-rdquo
-readme
 realz
 rebund
 redcarpet
 redcloth
 redgreen
 redhat
-refactor
-refactoring
-refactorings
 Refactors
 Refheap
 regen
-regex
-regexp
 remi
-reqs
 Responsify
 revertable
-rfc
 rfelix
 RHEL
 ridk
-roadmap
-rowspan
-rspec
-rsquo
-rss
 rstrip
-rsync
 rtomayko
 Rubo
-rubocop
 rubychan
-rubygem
 rubyinstaller
 rubyprof
 Ruparelia
 Rusiczki
 rvm
-ryanflorence
 saas
 samplelist
 samrayner
-sandboxed
 Sassc
-sassify
-schemastore
 Schroers
 Schwartzian
-scp
 screenshot
-scrollbar
 scrollbars
-scroller
-scss
-scssify
-sdk
 SDKROOT
 sectore
-semver
 seo
-serverless
-setenv
-SFTP
 shingo
 shopify
 shortlinks
 shortlog
-Shoulda
+shoulda
 sieversii
 sigpipe
-simplecov
 Singhaniya
 siteleaf
-sitemap
 SITENAME
 Slicehost
 slugified
-slugify
 smartforms
 smartify
 snipcart
@@ -599,179 +378,102 @@ somedir
 sonnym
 Sonomy
 sourced
-sourcemaps
 spam
 spotify
-src
 ssg
-ssh
-SSL
-stackoverflow
 standalone
-staticfiles
 staticman
-statictastic
-STDERR
-stdout
 Stickyposts
-strftime
-stringified
-Stringify
 styleguide
-stylesheet
 subdir
 subdomain
-subfolder
 subfolderitems
-subfolders
-subnav
 subpages
-subpath
 subpiece
 subsubfolderitems
 subthing
 subvalues
 subwidget
-sudo
 superdirectories
 superdirs
 SUSE
 sverrirs
-svg
-svn
 swfobject
 swupd
-symlink
-symlinking
-tablerow
 tada
 Taillandier
 talkyard
-tbody
 technicalpickles
 templating
-templatize
 Termux
 textilize
 textpattern
-thead
-therubyracer
 Theunissen
 Thornquest
-thoughtbot
 throughs
 Tidelift
 timeago
-timezone
 timezones
-titleize
-TLS
 tmm
-tmp
-toc
-tok
 tomjoht
-toml
 tomo
-toolset
 toshimaru
 triaged
 triaging
-truncatewords
 tsv
-ttf
 Tudou
 Tumblr
 Tweetsert
 txtpen
 Tyborska
 tzinfo
-ubuntu
-uby
 ujh
 ultron
 undumpable
 unencode
-Unescape
-unescaping
-unicode
-uniq
-upcase
 uppercasing
-uri
-url
 urlset
-username
 usernames
-usr
-utf
-utils
-utime
 utm
 vanpelt
 Vasovi
 vendored
-vercel
 versioned
 versioning
 vertycal
 Veyor
 vilcans
 Vishesh
-visualstudio
 vnd
 vohedge
 vps
-vscode
 vwochnik
-Walkthroughs
+WAI
 wdm
 We'd
-webfont
-webhook
+webfonts
 webhosting
 webmentions
-webrick
 website
-weekdate
-whitelist
-whitelisting
-wiki
-wikipedia
 wildcards
 willcodeforfoo
-woff
 wordpress
-Workaround
-workflow
 workflows
-wsl
-www
 xcode
-xcrun
 xdg
 Xhmikos
-xhtml
 Xiaoiver
 XMinutes
-xml
-xmlns
 xmlschema
-yajl
-yaml
 Yarp
 Yashu
 Yastreb
-yml
 Youku
 youtube
 yunbox
 zeropadding
 Zlatan
-zlib
 zoneinfo
 zpinter
-Zsh
-zshrc
 zypper
 zzot

.github/dependabot.yml

@@ -4,3 +4,9 @@ updates:
     directory: "/"
     schedule:
       interval: "weekly"
+  - package-ecosystem: bundler
+    reviewers:
+      - "jekyll/core"
+    directory: /
+    schedule:
+      interval: weekly

.github/release-please-config.json

@@ -0,0 +1,17 @@
+{
+  "pull-request-title-pattern": "chore: release 💎 ${version}",
+  "packages": {
+    ".": {
+      "changelog-path": "History.markdown",
+      "release-type": "ruby",
+      "bump-minor-pre-major": false,
+      "bump-patch-for-minor-pre-major": false,
+      "draft": false,
+      "prerelease": false,
+      "include-component-in-tag": false,
+      "include-v-in-tag": true,
+      "version-file": "lib/jekyll/version.rb"
+    }
+  },
+  "$schema": "https://raw.githubusercontent.com/googleapis/release-please/main/schemas/config.json"
+}

.github/release-please-manifest.json

@@ -0,0 +1,3 @@
+{
+  ".": "4.4.1"
+}

.github/workflows/benchmark.yml

@@ -20,7 +20,7 @@ jobs:
       BENCHMARK: true
     steps:
     - name: Checkout Jekyll
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
     - name: Set up Ruby
       uses: ruby/setup-ruby@v1
       with:

.github/workflows/ci.yml

@@ -26,6 +26,8 @@ jobs:
             version: "2.7"
           - label: Ruby 3.3
             version: "3.3"
+          - label: Ruby 3.4
+            version: "3.4"
         os:
           - label: Linux
             image: "ubuntu-latest"

.github/workflows/codeql.yml

@@ -0,0 +1,65 @@
+name: "CodeQL"
+
+on:
+#  push:
+#    branches: [ 'master' ]
+#  pull_request:
+#    # The branches below must be a subset of the branches above
+#    branches: [ 'master' ]
+  schedule:
+    - cron: '56 11 * * 5'
+
+jobs:
+  analyze:
+    name: Analyze
+    runs-on: ubuntu-latest
+    permissions:
+      actions: read
+      contents: read
+      security-events: write
+
+    strategy:
+      fail-fast: false
+      matrix:
+        language: [ 'ruby', 'javascript' ]
+        # CodeQL supports [ 'cpp', 'csharp', 'go', 'java', 'javascript', 'python', 'ruby' ]
+        # Use only 'java' to analyze code written in Java, Kotlin or both
+        # Use only 'javascript' to analyze code written in JavaScript, TypeScript or both
+        # Learn more about CodeQL language support at https://aka.ms/codeql-docs/language-support
+
+    steps:
+    - name: Checkout repository
+      uses: actions/checkout@v4
+
+    # Initializes the CodeQL tools for scanning.
+    - name: Initialize CodeQL
+      uses: github/codeql-action/init@v2
+      with:
+        languages: ${{ matrix.language }}
+        # If you wish to specify custom queries, you can do so here or in a config file.
+        # By default, queries listed here will override any specified in a config file.
+        # Prefix the list here with "+" to use these queries and those in the config file.
+
+        # For more details on CodeQL's query packs, refer to: https://docs.github.com/en/code-security/code-scanning/automatically-scanning-your-code-for-vulnerabilities-and-errors/configuring-code-scanning#using-queries-in-ql-packs
+        # queries: security-extended,security-and-quality
+
+
+    # Autobuild attempts to build any compiled languages (C/C++, C#, Go, Java, or Swift).
+    # If this step fails, then you should remove it and run the build manually (see below)
+    - name: Autobuild
+      uses: github/codeql-action/autobuild@v2
+
+    # ℹ️ Command-line programs to run using the OS shell.
+    # 📚 See https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsrun
+
+    #   If the Autobuild fails above, remove it and uncomment the following three lines.
+    #   modify them (or add more) to build your code if your project, please refer to the EXAMPLE below for guidance.
+
+    # - run: |
+    #     echo "Run, Build Application using script"
+    #     ./location_of_script_within_repo/buildscript.sh
+
+    - name: Perform CodeQL Analysis
+      uses: github/codeql-action/analyze@v2
+      with:
+        category: "/language:${{matrix.language}}"

.github/workflows/conventional-commits.yml

@@ -0,0 +1,50 @@
+# This workflow checks to ensure that all PR titles conform to the conventional
+# commit spec and use the correct type and scopes. The spec for conventional
+# commits can be found at https://www.conventionalcommits.org and there is a
+# nice cheatsheet in a github gist at
+# https://gist.github.com/qoomon/5dfcdf8eec66a051ecd85625518cfd13
+#
+# The types in this workflow match the spec. The scopes are custom to
+# Jekyll and can be changed if desired.
+name: Conventional Commit Check
+
+permissions:
+  pull-requests: read
+
+on:
+  pull_request_target:
+    types: [opened, edited, synchronize, reopened, ready_for_review]
+    branches:
+      - master
+
+jobs:
+  commit_lint:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: amannn/action-semantic-pull-request@v5.5.3
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          types: |
+            feat
+            fix
+            perf
+            refactor
+            docs
+            style
+            test
+            chore
+          scopes: |
+            core
+            cli
+            commands
+            plugins
+            site
+            helpers
+            converters
+            filters
+            tags
+            drops
+            tests
+            docs
+          requireScope: false

.github/workflows/docs.yml

@@ -4,6 +4,8 @@ on:
   push:
     branches:
       - master
+    paths:
+      - "docs/**"
 
 env:
   RUBY_VERSION: 2.7
@@ -17,7 +19,7 @@ jobs:
       BUNDLE_JOBS: 4
       BUNDLE_RETRY: 3
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - uses: ruby/setup-ruby@v1
         with:
           ruby-version: ${{ env.RUBY_VERSION }}

.github/workflows/release-please.yml

@@ -0,0 +1,44 @@
+name: "Release, please!"
+
+on:
+  push:
+    branches:
+      - master
+
+permissions:
+  contents: write
+  pull-requests: write
+
+jobs:
+  release-please:
+    if: ${{ github.repository == 'jekyll/jekyll' }}
+    runs-on: ubuntu-latest
+    outputs:
+      release_created: ${{ steps.release.outputs.release_created }}
+      tag_name: ${{ steps.release.outputs.tag_name }}
+    steps:
+    - name: Run Release Please
+      id: release
+      uses: googleapis/release-please-action@v4
+      with:
+        config-file: .github/release-please-config.json
+        manifest-file: .github/release-please-manifest.json
+        token: ${{ secrets.JEKYLLBOT_TOKEN }}
+
+  publish-gem:
+    needs: release-please
+    if: ${{ needs.release-please.outputs.release_created == 'true' }}
+    runs-on: ubuntu-latest
+    permissions:
+      id-token: write
+      contents: write
+    steps:
+    - name: Checkout Repository
+      uses: actions/checkout@v6
+    - name: Set up Ruby
+      uses: ruby/setup-ruby@v1
+      with:
+        ruby-version: '3.3'
+        bundler-cache: true
+    - name: Build and Publish Gem
+      uses: rubygems/release-gem@v1

.github/workflows/release.yml

@@ -1,34 +0,0 @@
-name: Release Gem
-
-on:
-  push:
-    branches:
-      - master
-      - "*-stable"
-    paths:
-      - "lib/**/version.rb"
-
-jobs:
-  release:
-    if: "github.repository_owner == 'jekyll'"
-    name: "Release Gem (Ruby ${{ matrix.ruby_version }})"
-    runs-on: "ubuntu-latest"
-    strategy:
-      fail-fast: true
-      matrix:
-        ruby_version:
-          - 2.7
-    steps:
-      - name: Checkout Repository
-        uses: actions/checkout@v4
-      - name: "Set up Ruby ${{ matrix.ruby_version }}"
-        uses: ruby/setup-ruby@v1
-        with:
-          ruby-version: ${{ matrix.ruby_version }}
-          bundler-cache: true
-      - name: Build and Publish Gem
-        uses: ashmaroli/release-gem@dist
-        with:
-          gemspec_name: jekyll
-        env:
-          GEM_HOST_API_KEY: ${{ secrets.RUBYGEMS_GEM_PUSH_API_KEY }}

.github/workflows/spelling.yml

@@ -65,18 +65,21 @@ jobs:
     steps:
     - name: check-spelling
       id: spelling
-      uses: check-spelling/check-spelling@v0.0.21
+      uses: check-spelling/check-spelling@v0.0.26
       with:
-        # This workflow runs in response to both `push` and `pull_request`, if there's an open `pull_request` in the same repository for a given branch, there's no reason to spend resources checking both the `push` and the `pull_request`, so this flag tells the action while running for the `push` to find the `pull_request` and stop working early:
+        # This workflow runs in response to both `push` and `pull_request`, if there's an open `pull_request` in the same repository
+        # for a given branch, there's no reason to spend resources checking both the `push` and the `pull_request`, so this flag tells
+        # the action while running for the `push` to find the `pull_request` and stop working early:
         suppress_push_for_open_pull_request: 1
         # The action will manage checking out the repository itself instead of requiring the workflow to use `actions/checkout...`:
         checkout: true
-        # If running without `: write`, posting a comment won't work, and for security `: write` permissions are left to a distinct (optional) job, here we skip trying to post a comment:
+        # If running without `: write`, posting a comment won't work, and for security `: write` permissions are left to a distinct
+        # (optional) job, here we skip trying to post a comment:
         post_comment: 0
         use_magic_file: 1
         extra_dictionary_limit: 10
         extra_dictionaries:
-          cspell:software-terms/src/software-terms.txt
+          cspell:software-terms/software-terms.txt
           cspell:php/php.txt
           cspell:node/node.txt
           cspell:django/django.txt
@@ -86,5 +89,7 @@ jobs:
           cspell:fullstack/fullstack.txt
           cspell:filetypes/filetypes.txt
         check_extra_dictionaries: ''
+        dictionary_source_prefixes: >-
+          {"cspell": "https://raw.githubusercontent.com/check-spelling/cspell-dicts/v20241114/dictionaries/"}
 
 # This workflow has opted not to use comments (users can view the report in GitHub Step Summary)

.github/workflows/third-party.yml

@@ -1,16 +1,11 @@
 name: Third-Party Repository Profiling
 
 on:
-  push:
-    branches:
-      - master
-  pull_request:
-    branches:
-      - master
+  workflow_dispatch:
+
 jobs:
   build_n_profile:
-    if: "!contains(github.event.commits[0].message, '[ci skip]')"
-    runs-on: 'ubuntu-latest'
+    runs-on: "ubuntu-latest"
     env:
       BUNDLE_GEMFILE: "sandbox/Gemfile"
       BUNDLE_PATH: "vendor/bundle"
@@ -18,19 +13,19 @@ jobs:
       BUNDLE_RETRY: 3
     steps:
     - name: Checkout Jekyll
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
       with:
         fetch-depth: 5
         path: jekyll
     - name: Checkout Third-Party Repository
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
       with:
         repository: ashmaroli/tomjoht.github.io
         path: sandbox
     - name: Set up Ruby
       uses: ruby/setup-ruby@v1
       with:
-        ruby-version: 2.7
+        ruby-version: 3.4
         bundler-cache: true
     - name: Run Jekyll Build 3 times
       run: |

.rubocop.yml

@@ -1,35 +1,53 @@
----
-inherit_from: .rubocop_todo.yml
+# -----------------------------------------------------------------------------
+# This file has been formatted via a Rake Task configuring cops from
+# RuboCop v1.57.2.
+#
+# To add more cops, paste configurations at the end of the file and run
+# the rake task via `bundle exec rake rubocop:format_config`.
+# -----------------------------------------------------------------------------
+
+inherit_from: ".rubocop_todo.yml"
 
 require:
-  - rubocop-minitest
-  - rubocop-performance
-  - rubocop-rake
-  - rubocop-rspec
-  - ./rubocop/jekyll
-
-Jekyll/NoPutsAllowed:
-  Exclude:
-    - rake/*.rake
+- "./rubocop/jekyll"
+- rubocop-minitest
+- rubocop-performance
+- rubocop-rake
+- rubocop-rspec
 
+# Directive for all cops
 AllCops:
   TargetRubyVersion: 2.7
   Include:
-    - lib/**/*.rb
-    - test/**/*.rb
+  - lib/**/*.rb
+  - test/**/*.rb
   Exclude:
-    - bin/**/*
-    - exe/**/*
-    - benchmark/**/*
-    - script/**/*
-    - vendor/**/*
-    - tmp/**/*
+  - benchmark/**/*
+  - bin/**/*
+  - exe/**/*
+  - script/**/*
+  - tmp/**/*
+  - vendor/**/*
 
+# Configure custom cop
+Jekyll/NoPutsAllowed:
+  Exclude:
+  - rake/*.rake
+
+# Configure built-in cops
+# =======================
+
+# Gemspec cops
+# ----------------------------------------
 Gemspec/DeprecatedAttributeAssignment:
   Enabled: true
+Gemspec/DevelopmentDependencies:
+  Enabled: false
 Gemspec/RequireMFA:
   Enabled: false
 
+# Layout cops
+# ----------------------------------------
 Layout/BeginEndAlignment:
   Enabled: true
 Layout/EmptyComment:
@@ -38,6 +56,8 @@ Layout/EmptyLinesAroundAttributeAccessor:
   Enabled: true
 Layout/EndAlignment:
   Severity: error
+Layout/EndOfLine:
+  Enabled: false
 Layout/FirstArrayElementIndentation:
   EnforcedStyle: consistent
 Layout/FirstHashElementIndentation:
@@ -54,10 +74,10 @@ Layout/LineEndStringConcatenationIndentation:
   Enabled: true
 Layout/LineLength:
   Exclude:
-    - !ruby/regexp /features\/.*.rb/
-    - Rakefile
-    - rake/*.rake
-    - Gemfile
+  - Gemfile
+  - Rakefile
+  - features/**/*.rb
+  - rake/**/*.rake
   Max: 100
   Severity: warning
 Layout/MultilineMethodCallIndentation:
@@ -71,8 +91,10 @@ Layout/SpaceBeforeBrackets:
 Layout/SpaceInsideHashLiteralBraces:
   Enabled: true
   Exclude:
-    - test/**/*.rb
+  - test/**/*.rb
 
+# Lint cops
+# ----------------------------------------
 Lint/AmbiguousAssignment:
   Enabled: true
 Lint/AmbiguousOperatorPrecedence:
@@ -84,7 +106,7 @@ Lint/BinaryOperatorWithIdenticalOperands:
 Lint/ConstantDefinitionInBlock:
   Enabled: true
   Exclude:
-    - test/**/*.rb
+  - test/**/*.rb
 Lint/ConstantOverwrittenInRescue:
   Enabled: true
 Lint/DeprecatedConstants:
@@ -95,6 +117,10 @@ Lint/DuplicateBranch:
   Enabled: true
 Lint/DuplicateElsifCondition:
   Enabled: true
+Lint/DuplicateMagicComment:
+  Enabled: true
+Lint/DuplicateMatchPattern:
+  Enabled: true
 Lint/DuplicateRegexpCharacterClassElement:
   Enabled: true
 Lint/DuplicateRequire:
@@ -119,11 +145,13 @@ Lint/LambdaWithoutLiteralBlock:
   Enabled: true
 Lint/MissingSuper:
   Enabled: false
+Lint/MixedCaseRange:
+  Enabled: true
 Lint/MixedRegexpCaptureTypes:
   Enabled: false
 Lint/NestedPercentLiteral:
   Exclude:
-    - test/test_site.rb
+  - test/test_site.rb
 Lint/NoReturnInBeginEndBlocks:
   Enabled: true
 Lint/NumberedParameterAssignment:
@@ -136,8 +164,12 @@ Lint/RaiseException:
   Enabled: true
 Lint/RedundantDirGlobSort:
   Enabled: true
+Lint/RedundantRegexpQuantifiers:
+  Enabled: true
 Lint/RedundantSafeNavigation:
   Enabled: true
+Lint/RefinementImportMethods:
+  Enabled: true
 Lint/RequireRangeParentheses:
   Enabled: true
 Lint/RequireRelativeSelfPath:
@@ -166,32 +198,38 @@ Lint/UnreachableLoop:
   Enabled: true
 Lint/UselessMethodDefinition:
   Enabled: true
+Lint/UselessRuby2Keywords:
+  Enabled: true
 Lint/UselessTimes:
   Enabled: true
 Lint/Void:
   Exclude:
-    - lib/jekyll/site.rb
+  - lib/jekyll/site.rb
 
+# Metrics cops
+# ----------------------------------------
 Metrics/AbcSize:
   Max: 23
 Metrics/BlockLength:
   Exclude:
-    - test/**/*.rb
-    - lib/jekyll/configuration.rb
-    - rake/*.rake
+  - lib/jekyll/configuration.rb
+  - rake/**/*.rake
+  - test/**/*.rb
 Metrics/ClassLength:
   Exclude:
-    - !ruby/regexp /features\/.*.rb$/
-    - !ruby/regexp /test\/.*.rb$/
-    - lib/jekyll/document.rb
-    - lib/jekyll/site.rb
-    - lib/jekyll/commands/serve.rb
-    - lib/jekyll/configuration.rb
+  - features/**/*.rb
+  - lib/jekyll/commands/serve.rb
+  - lib/jekyll/configuration.rb
+  - lib/jekyll/document.rb
+  - lib/jekyll/site.rb
+  - test/**/*.rb
   Max: 240
+Metrics/CollectionLiteralLength:
+  Enabled: true
 Metrics/CyclomaticComplexity:
   Exclude:
-    - lib/jekyll/utils.rb
-    - lib/jekyll/commands/serve.rb
+  - lib/jekyll/commands/serve.rb
+  - lib/jekyll/utils.rb
   Max: 11
 Metrics/MethodLength:
   CountComments: false
@@ -199,58 +237,102 @@ Metrics/MethodLength:
   Severity: error
 Metrics/ModuleLength:
   Exclude:
-    - lib/jekyll/filters.rb
+  - lib/jekyll/filters.rb
   Max: 240
 Metrics/ParameterLists:
   Max: 4
 Metrics/PerceivedComplexity:
   Max: 13
 
+# Minitest cops
+# ----------------------------------------
 Minitest/AssertEmptyLiteral:
   Enabled: false
 Minitest/AssertInDelta:
   Enabled: true
-Minitest/AssertionInLifecycleHook:
-  Enabled: true
 Minitest/AssertKindOf:
   Enabled: true
+Minitest/AssertOperator:
+  Enabled: false
 Minitest/AssertOutput:
   Enabled: true
 Minitest/AssertPathExists:
   Enabled: true
+Minitest/AssertPredicate:
+  Enabled: false
+Minitest/AssertRaisesWithRegexpArgument:
+  Enabled: true
+Minitest/AssertSame:
+  Enabled: true
 Minitest/AssertSilent:
   Enabled: true
 Minitest/AssertWithExpectedArgument:
   Enabled: true
+Minitest/AssertionInLifecycleHook:
+  Enabled: true
+Minitest/DuplicateTestRun:
+  Enabled: true
+Minitest/EmptyLineBeforeAssertionMethods:
+  Enabled: false
+Minitest/LifecycleHooksOrder:
+  Enabled: true
 Minitest/LiteralAsActualArgument:
   Enabled: true
-Minitest/TestMethodName:
-  Enabled: false
 Minitest/MultipleAssertions:
   Enabled: true
+Minitest/NonExecutableTestMethod:
+  Enabled: true
+Minitest/NonPublicTestMethod:
+  Enabled: true
+Minitest/RedundantMessageArgument:
+  Enabled: true
 Minitest/RefuteInDelta:
   Enabled: true
 Minitest/RefuteKindOf:
   Enabled: true
+Minitest/RefuteOperator:
+  Enabled: false
 Minitest/RefutePathExists:
   Enabled: true
+Minitest/RefutePredicate:
+  Enabled: false
+Minitest/RefuteSame:
+  Enabled: true
+Minitest/ReturnInTestMethod:
+  Enabled: true
+Minitest/SkipEnsure:
+  Enabled: true
+Minitest/SkipWithoutReason:
+  Enabled: true
+Minitest/TestFileName:
+  Enabled: true
+  Exclude:
+  - test/helper.rb
+Minitest/TestMethodName:
+  Enabled: false
 Minitest/UnreachableAssertion:
   Enabled: true
 Minitest/UnspecifiedException:
   Enabled: true
+Minitest/UselessAssertion:
+  Enabled: true
 
+# Naming cops
+# ----------------------------------------
 Naming/FileName:
   Enabled: false
 Naming/HeredocDelimiterNaming:
   Exclude:
-    - test/**/*.rb
+  - test/**/*.rb
 Naming/MemoizedInstanceVariableName:
   Exclude:
-    - lib/jekyll/convertible.rb
-    - lib/jekyll/drops/site_drop.rb
-    - lib/jekyll/drops/unified_payload_drop.rb
-    - lib/jekyll/page_without_a_file.rb
+  - lib/jekyll/convertible.rb
+  - lib/jekyll/drops/site_drop.rb
+  - lib/jekyll/drops/unified_payload_drop.rb
+  - lib/jekyll/page_without_a_file.rb
 
+# Performance cops
+# ----------------------------------------
 Performance/AncestorsInclude:
   Enabled: false
 Performance/ArraySemiInfiniteRangeSlice:
@@ -267,6 +349,8 @@ Performance/ConstantRegexp:
   Enabled: true
 Performance/MapCompact:
   Enabled: true
+Performance/MapMethodChain:
+  Enabled: true
 Performance/MethodObjectAsBlock:
   Enabled: true
 Performance/RedundantEqualityComparisonBlock:
@@ -288,23 +372,27 @@ Performance/StringIdentifierArgument:
 Performance/StringInclude:
   Enabled: true
   Exclude:
-    - lib/jekyll/utils/platforms.rb
+  - lib/jekyll/utils/platforms.rb
 Performance/Sum:
   Enabled: true
 
+# Security cops
+# ----------------------------------------
 Security/CompoundHash:
   Enabled: true
 Security/IoMethods:
   Enabled: true
 Security/MarshalLoad:
   Exclude:
-    - !ruby/regexp /test\/.*.rb$/
-    - lib/jekyll/regenerator.rb
+  - lib/jekyll/regenerator.rb
+  - test/**/*.rb
 Security/YAMLLoad:
   Exclude:
-    - !ruby/regexp /features\/.*.rb/
-    - !ruby/regexp /test\/.*.rb$/
+  - features/**/*.rb
+  - test/**/*.rb
 
+# Style cops
+# ----------------------------------------
 Style/AccessModifierDeclarations:
   Enabled: false
 Style/AccessorGrouping:
@@ -317,21 +405,25 @@ Style/ArgumentsForwarding:
   Enabled: false
 Style/ArrayCoercion:
   Enabled: true
+Style/ArrayIntersect:
+  Enabled: true
 Style/BisectedAttrAccessor:
   Enabled: true
 Style/CaseLikeIf:
   Enabled: true
-Style/StringChars:
-  Enabled: true
 Style/ClassAndModuleChildren:
   Exclude:
-    - test/**/*.rb
+  - test/**/*.rb
 Style/ClassEqualityComparison:
   Enabled: true
 Style/CollectionCompact:
   Enabled: true
 Style/CombinableLoops:
   Enabled: true
+Style/ConcatArrayLiterals:
+  Enabled: true
+Style/DirEmpty:
+  Enabled: true
 Style/DocumentDynamicEvalDefinition:
   Enabled: true
 Style/Documentation:
@@ -342,25 +434,29 @@ Style/EmptyHeredoc:
   Enabled: true
 Style/EndlessMethod:
   Enabled: true
+Style/EnvHome:
+  Enabled: true
+Style/ExactRegexpMatch:
+  Enabled: true
 Style/ExplicitBlockArgument:
   Enabled: false
 Style/ExponentialNotation:
   Enabled: true
-Style/EnvHome:
-  Enabled: true
 Style/FetchEnvVar:
   Enabled: false
+Style/FileEmpty:
+  Enabled: true
 Style/FileRead:
   Enabled: false
-Style/FormatStringToken:
-  Exclude:
-    - lib/jekyll/utils/ansi.rb
-    - lib/jekyll/liquid_renderer/table.rb
-    - lib/jekyll/profiler.rb
-Style/FrozenStringLiteralComment:
-  EnforcedStyle: always
 Style/FileWrite:
   Enabled: true
+Style/FormatStringToken:
+  Exclude:
+  - lib/jekyll/liquid_renderer/table.rb
+  - lib/jekyll/profiler.rb
+  - lib/jekyll/utils/ansi.rb
+Style/FrozenStringLiteralComment:
+  EnforcedStyle: always
 Style/GlobalStdStream:
   Enabled: true
 Style/GuardClause:
@@ -368,7 +464,7 @@ Style/GuardClause:
 Style/HashAsLastArrayItem:
   Enabled: true
 Style/HashConversion:
-  Enabled: true  
+  Enabled: true
 Style/HashEachMethods:
   Enabled: true
 Style/HashExcept:
@@ -392,9 +488,11 @@ Style/MapCompactWithConditionalBlock:
   Enabled: true
 Style/MapToHash:
   Enabled: true
+Style/MinMaxComparison:
+  Enabled: true
 Style/MixinUsage:
   Exclude:
-    - test/helper.rb
+  - test/helper.rb
 Style/ModuleFunction:
   Enabled: false
 Style/MultilineTernaryOperator:
@@ -405,61 +503,94 @@ Style/NestedFileDirname:
   Enabled: true
 Style/NilLambda:
   Enabled: true
+Style/ObjectThen:
+  Enabled: true
+Style/OperatorMethodCall:
+  Enabled: true
 Style/OptionalBooleanParameter:
   Enabled: true
   Exclude:
-    - lib/jekyll/log_adapter.rb
+  - lib/jekyll/log_adapter.rb
 Style/PercentLiteralDelimiters:
   PreferredDelimiters:
     "%Q": "{}"
-    "%W": ()
+    "%W": "()"
     "%q": "{}"
     "%r": "!!"
-    "%s": ()
-    "%w": ()
-    "%x": ()
+    "%s": "()"
+    "%w": "()"
+    "%x": "()"
 Style/QuotedSymbols:
   Enabled: true
 Style/RedundantArgument:
   Enabled: true
+Style/RedundantArrayConstructor:
+  Enabled: true
 Style/RedundantAssignment:
   Enabled: true
+Style/RedundantConstantBase:
+  Enabled: true
+Style/RedundantCurrentDirectoryInPath:
+  Enabled: true
+Style/RedundantDoubleSplatHashBraces:
+  Enabled: true
+Style/RedundantEach:
+  Enabled: true
 Style/RedundantFetchBlock:
   Enabled: false
 Style/RedundantFileExtensionInRequire:
   Enabled: true
+Style/RedundantFilterChain:
+  Enabled: true
+Style/RedundantHeredocDelimiterQuotes:
+  Enabled: true
 Style/RedundantInitialize:
   Enabled: true
   Exclude:
-    - lib/jekyll/plugin.rb
+  - lib/jekyll/plugin.rb
+Style/RedundantLineContinuation:
+  Enabled: true
+Style/RedundantRegexpArgument:
+  Enabled: true
 Style/RedundantRegexpCharacterClass:
   Enabled: true
+Style/RedundantRegexpConstructor:
+  Enabled: true
 Style/RedundantRegexpEscape:
   Enabled: true
 Style/RedundantSelfAssignment:
   Enabled: true
 Style/RedundantSelfAssignmentBranch:
   Enabled: true
+Style/RedundantStringEscape:
+  Enabled: true
 Style/RegexpLiteral:
   EnforcedStyle: percent_r
 Style/RescueModifier:
   Enabled: false
+Style/ReturnNilInPredicateMethodDefinition:
+  Enabled: true
 Style/SafeNavigation:
   Exclude:
-    - lib/jekyll/document.rb
+  - lib/jekyll/document.rb
+  - lib/jekyll/page.rb
 Style/SignalException:
   EnforcedStyle: only_raise
 Style/SingleArgumentDig:
   Enabled: true
+Style/SingleLineDoEndBlock:
+  Enabled: true
 Style/SlicingWithRange:
   Enabled: false
 Style/SoleNestedConditional:
   Enabled: true
+Style/StringChars:
+  Enabled: true
 Style/StringConcatenation:
   Enabled: true
   Exclude:
-    - lib/jekyll/commands/*.rb
-    - test/**/*.rb
+  - lib/jekyll/commands/*.rb
+  - test/**/*.rb
 Style/StringLiterals:
   EnforcedStyle: double_quotes
 Style/StringLiteralsInInterpolation:

Gemfile

@@ -15,16 +15,21 @@ end
 #
 
 group :test do
-  gem "activesupport", "~> 7.0.0"
+  gem "activesupport", "< 7.1.0"
   gem "cucumber", "~> 9.0"
   gem "httpclient"
   gem "jekyll_test_plugin"
   gem "jekyll_test_plugin_malicious"
   gem "memory_profiler"
+
+  # Runtime dependency of gem `httpclient`. _Needed only in Ruby 3.4+_.
+  # Remove once gem `httpclient` ships with `mutex_m` listed as a dependency in its gemspec.
+  gem "mutex_m", "~> 0.3" if RUBY_VERSION >= "3.4"
+
   gem "nokogiri", "~> 1.7"
   gem "rspec"
   gem "rspec-mocks"
-  gem "rubocop", "~> 1.37.0"
+  gem "rubocop", "~> 1.57.2"
   gem "rubocop-minitest"
   gem "rubocop-performance"
   gem "rubocop-rake"
@@ -49,7 +54,7 @@ group :test_legacy do
   gem "minitest"
   gem "minitest-profile"
   gem "minitest-reporters"
-  gem "shoulda"
+  gem "shoulda-context"
   gem "simplecov"
 end
 

History.markdown

@@ -1,10 +1,176 @@
 ## HEAD
 
+### Bug Fixes
+
+  * Avoid caching resource when called via `include_relative` tag (#9784)
+  * Fix logs containing IPv6 URLs (#9813)
+  * Do not treat colons in `url_placeholders` as URI delimiters (#9850)
+  * Fix servlet do_GET header logic (#9867)
+  * Add logger to Gemfile for Ruby 4.0 (#9920)
+
+### Documentation
+
+  * Improve documentation on collections in step-by-step walkthrough (#9803)
+  * Add `https://form.taxi` as a third-party resource for forms (#9802)
+  * Add Supranode to third-party deployment guide (#9786)
+  * Document the need for a `Gemfile` in deployment step of step-by-step walkthrough (#9805)
+  * Add Azion to the 3rd party deployment docs (#9811)
+  * Add ruby-erb prerequisite for Arch Linux installations (#9832)
+  * Add jekyllup.com to themes documentation (#9882)
+  * docs: Update contributor badge in README to include avatar height and limit parameters (#9912)
+  * Update WDM (0.1.1 → 0.2.0) in the Windows docs (#9897)
+  * Bump supported versions (#9923)
+  * Add GitCMS to resources docs (#9960)
+
 ### Development Fixes
 
-  * Backport #9737 for v4.3.x: Fix expected markup per WAI-ARIA requirements (#9738)
-  * Backport #9742 for v4.3.x: Add an optional `:rdoc` group of gems (#9744)
-  * Backport #9747 for v4.3.x: Bump cucumber to v9 (#9752)
+  * Improve readability of `post_url` tag (#9829)
+  * Fix flaky test that depends on current minute (#9889)
+  * build: fix broken CI on newer rubies (#9954)
+
+### Minor Enhancements
+
+  * feat: Allowing post_url tag to receive liquid variables (#9776)
+  * Add .ruby-lsp to default excludes (#9914)
+  * Allow configuring future metadata for individual collections (#9925)
+
+## 4.4.1 / 2025-01-29
+
+### Bug Fixes
+
+  * Restore globbed path behavior in front matter defaults (#9762)
+
+## 4.4.0 / 2025-01-27
+
+### Minor Enhancements
+
+  * Allow marking specific highlighted lines via Liquid (#9138)
+  * Add gem `csv` to runtime dependency list (#9522)
+  * Bump the minimum ruby version to 2.7 (#9525)
+  * Acknowledge `livereload_port` from site config too (#9606)
+  * Add gem `base64` as runtime dependency (#9740)
+  * Add gem `json` as runtime_dependency (#9671)
+  * Remove unnecessary constraint on gem `mercenary` (#9758)
+
+### Bug Fixes
+
+  * Optimize default front matter using `File.fnmatch?` (#9185)
+  * Remove totals in profile table properly (#9186)
+  * Optimize `Site#each_site_file` (#9187)
+  * Rename sass partial created for new blank site (#9257)
+  * Fix `jekyll serve --detach` with jekyll-sass-converter 3.x (#9304)
+  * Handle TypeError from `where` filter gracefully (#9292)
+  * Add support for upcoming logger 1.4.3 (#9392)
+  * Fix typo in devcontainer.json (#9364)
+  * Correct rubocop lint errors (#9600)
+  * Fix inexistent layout warning for the default 404 page (#9589)
+  * Relax version constraint on `wdm` in new Gemfile (#9662)
+  * Fix `--livereload-ignore` option (#9570)
+  * Render theme-gem root only in development (#9680)
+
+### Development Fixes
+
+  * Cleanup highlight tag (#9177)
+  * Run tests in utc (#9168)
+  * Lock Ruby in CI to v3.1.2 and bump JRuby to v9.4.0.0 (#9196)
+  * Update sass related tests for jekyll-sass-converter 3.x (#9223)
+  * Split `test/test_tags.rb` into multiple files (#9230)
+  * test: use hash explicitly for Struct initializer for ruby 3.2 (#9237)
+  * script/default-site: accept flags for `jekyll new` (#9259)
+  * Bump check-spelling/check-spelling from 0.0.20 to 0.0.21 (#9205)
+  * Use check-spelling/check-spelling@v0.0.21 (#9199)
+  * Bump RuboCop to v1.45.x (#9305)
+  * Bump Rubocop to version 1.48.x (#9326)
+  * Bump versions of ruby & nodejs in devcontainer (#9360)
+  * Bump rubocop version to 1.52.x (#9361)
+  * Upgrade RuboCop to 1.54 (#9401)
+  * Add CodeQL workflow (#9397)
+  * Bump actions/checkout from 3 to 4 (#9442)
+  * Test suite uses shoulda-context only. (#9441)
+  * Keep activesupport at version 7.0.x (#9469)
+  * Bump Rubocop to 1.56.4 (#9459)
+  * Configure dependabot to handle rubygems dependencies (#9445)
+  * Update rubocop gem (#9476)
+  * Fix Performance/StringIdentifierArgument violation in site.rb and allow activesupport 6 for windows tests (#9512)
+  * Add a few more emeritus team members (#9535)
+  * Make custom cop inherit `RuboCop::Cop::Base` (#9597)
+  * CI: Use JRuby 9.4.8.0 (#9654)
+  * Stop testing with Cucumber on JRuby (#9661)
+  * Windows CI on GitHub Actions (#9659)
+  * Run GitHub Actions only if needed (#9664)
+  * Format `.rubocop.yml` via a rake task (#9687)
+  * Configure some new cops (#9688)
+  * Fix expected markup per WAI-ARIA requirements (#9737)
+  * Add an optional `:rdoc` group of gems (#9742)
+  * Test `inspect` filter with custom object (#9743)
+  * Bump cucumber to v9 (#9747)
+  * Add Ruby 3.4 to CI matrix (#9740)
+  * Remove unnecessary runtime dependency (#9753)
+  * Bump `check-spelling/check-spelling` action (#9756)
+
+### Documentation
+
+  * Fix Nested tree navigation with recursion example (#9174)
+  * Fix typo on website (#9203)
+  * Publish post on major release of sass-converter (#9225)
+  * Update Jekyll on macOS (macos.md) and current ruby version to 3.1.3 in ruby.yml (#9195)
+  * Add release post for v4.3.2 (#9263)
+  * Grammatical reordering in  3-to-4 upgrading docs (#9245)
+  * fixed grammatical mistake on "showcase" page (#9264)
+  * Mark `highlight` `mark_lines` feature as 4.4 in docs (#9184)
+  * Add v3.9.3 release history & post to `master` branch (#9284)
+  * Update S3 deployment to remove s3_website (#9221)
+  * Document Exclude behavior, Include overrides and the default exclusion list (#9376)
+  * Update macos.md, remove Catalina (macOS 10.15) (#9405)
+  * Update macos.md, add support for Ventura (#9406)
+  * Typo fix - update to hooks and 3rd party deployment and one other article (#9411)
+  * Update 07-assets.md (#9393)
+  * Mention the front matter requirement in pages.md (#9423)
+  * Point to the Rouge GitHub repo rather than broken website (#9362)
+  * Add new theme directory to themes resources (#9356)
+  * Adds Kinsta to 3rd party deployments (#9331)
+  * Update Fedora prerequisites to include g++ (#9290)
+  * Update convert-site-to-jekyll.md (#9348)
+  * Update github-actions documentation (#9426)
+  * Update resources.md (#9449)
+  * Add GitHub Pages helpful notes (#9235)
+  * Clarify which version of Jekyll needs 'jekyll-paginate' (#9477)
+  * chore: update showcases (#9473)
+  * Add FreeBSD installation instructions (#9481)
+  * Fix broken link for the security team page (#9497)
+  * Fix broken links for several Jekyll integrations (#9496)
+  * Add release post for v4.3.3 (#9511)
+  * Add docs version badge to page_excerpts feature (#9520)
+  * Improve accessibility of the docs (#9338)
+  * Fix gem quote consistency on docs (#9517)
+  * Make site search work again (#9530)
+  * Jekyll docs template typo - All pages show "Deployment" (#9548)
+  * Fixed: Wrong navigation style on the right side of news and docs pages (#9586)
+  * Add redirect for step-by-step tutorial (#9593)
+  * Add Jekyll 3.10.0 release post & history (#9625)
+  * Fix minor docs error (#9641)
+  * Update windows.md (#9644)
+  * Document keys of global variable `{{ jekyll }}` (#9653)
+  * Fix incorrect and inconsistent variables in the permalinks page (#9591)
+  * Fix lapses in documentation of page variables (#9667)
+  * Add note about VSCode warning for SCSS files (#9609)
+  * docs: Fix incorrect parentheses (#9629)
+  * docs: Fix of a bug in the pagination section (#8890)
+  * Update current Ruby version renders and macOS docs (#9614)
+  * Improve docs around using GitHub Actions to build and deploy Jekyll sites (#9682)
+  * Fix grammar in the description of `page.excerpt` variable (#9689)
+  * Render HTML tables at `/docs/permalinks/` using a data file (#9666)
+  * Fix HTML attribute separation whitespace placement in the Navigation include code of Assets step of the Step by Step Tutorial (#9695)
+  * Fix missing glob matching pattern support description in the documentation of the `include` and `exclude` configuration options (#9697)
+  * Fix missing `url` configuration option documentation (#9699)
+  * Link to GitHub Pages Dependency versions page instead of explicitly specifying Jekyll version (#9715)
+  * Fix broken link on third-party.md (#9704)
+  * Fix: remove inaccessible links and their descriptions (#9745)
+  * Add release post for v4.4.0 (#9759)
+
+### Site Enhancements
+
+  * Extract markup for `Improve this page` into an inclusion (#9675)
 
 ## 4.3.4 / 2024-09-16
 
@@ -27,6 +193,37 @@
 
   * Backport #9237 for v4.3.x: Use Hash explicitly for Struct initializer (#9285)
 
+## 3.10.0 / 2024-06-23
+
+### Minor Enhancements
+
+  * Backport add-csv-dependency from #9522 to Jekyll 3 (#9616)
+  * 3.10-stable: Add webrick as a dependency (#9620)
+
+## 3.9.5 / 2024-02-12
+
+### Minor Enhancements
+
+  * 3.9-stable: allow Pages to be Excerpted (#9550)
+
+## 3.9.4 / 2023-12-28
+
+### Bug Fixes
+
+  * Backport #9392 for v3.9.x: Add support for Ruby 3.3 Logger (#9513)
+
+## 3.9.3 / 2023-01-29
+
+### Bug Fixes
+
+  * 3.9.x: Support i18n 1.x (#9269)
+  * Backport #8880 for v3.9.x: Support both tzinfo v1 and v2 along with non-half hour offsets (#9280)
+
+### Development Fixes
+
+  * v3.9.x: test under Ruby 3.2 #9272)
+  * v3.9.x: fix rdiscount test (#9277)
+
 ## 4.3.2 / 2023-01-20
 
 ### Bug Fixes
@@ -181,7 +378,7 @@
   * Remove Aerobatic (#9007)
   * Add Jekyll 3.9.2 release post to 'master' branch (#9013)
   * Simplify macOS installation docs (#8993)
-  * Improve document about Github Actions section (#8853)
+  * Improve document about GitHub Actions section (#8853)
   * Update permalinks.md  (#9017)
   * Add clarity to docs on permalinks placeholders and built-ins (#8995)
   * Remove Ionic Framework site from showcase (#9057)
@@ -1255,7 +1452,7 @@
   * make flakey test more robust (#6277)
   * Add a quick test for DataReader (#6284)
   * script/backport-pr: commit message no longer includes the `#` (#6289)
-  * Add Add CODEOWNERS file to help automate reviews. (#6320)
+  * Add CODEOWNERS file to help automate reviews. (#6320)
   * Fix builds on codeclimate (#6333)
   * Bump rubies on Travis (#6366)
 
@@ -2313,7 +2510,7 @@
   * Fixed an unclear code comment in site template SCSS (#3837)
   * Fix reading of binary metadata file (#3845)
   * Remove var collision with site template header menu iteration variable (#3838)
-  * Change non-existent `hl_linenos` to `hl_lines` to allow passthrough in safe mode (#3787)
+  * Change nonexistent `hl_linenos` to `hl_lines` to allow passthrough in safe mode (#3787)
   * Add missing flag to disable the watcher (#3820)
   * Update CI guide to include more direct explanations of the flow (#3891)
   * Set `future` to `false` in the default config (#3892)
@@ -2622,7 +2819,7 @@
   * Document the `name` variable for collection permalinks (#2829)
   * Adds info about installing jekyll in current dir (#2839)
   * Remove deprecated `jekyll-projectlist` plugin from list of third-party plugins (#2742)
-  * Remove tag plugins that are built in to Jekyll (#2751)
+  * Remove tag plugins that are built into Jekyll (#2751)
   * Add `markdown-writer` package for Atom Editor to list of third-party plugins (#2763)
   * Fix typo in site documentation for collections (#2764)
   * Fix minor typo on plugins docs page (#2765)

README.markdown

@@ -69,7 +69,7 @@ Support this project by becoming a sponsor. Your logo will show up in this READM
 ### Contributors
 
 This project exists thanks to all the people who contribute.
-[![Jekyll Contributors](https://opencollective.com/jekyll/contributors.svg?width=890&button=false)](../../graphs/contributors)
+[![Jekyll Contributors](https://opencollective.com/jekyll/contributors.svg?width=890&&avatarHeight=24&limit=100&button=false)](../../graphs/contributors)
 
 ### Backers
 

Rakefile

@@ -8,6 +8,7 @@ require "yaml"
 
 $LOAD_PATH.unshift File.expand_path("lib", __dir__)
 require "jekyll/version"
+require "bundler/gem_tasks"
 
 Dir.glob("rake/**.rake").each { |f| import f }
 
@@ -42,11 +43,15 @@ def gem_file
 end
 
 def normalize_bullets(markdown)
-  markdown.gsub(%r!\n\s{2}\*{1}!, "\n-")
+  # Normalize both old-style indented bullets ("  *") and
+  # release-please-style non-indented bullets ("*") to "-"
+  markdown.gsub(%r!\n\s{0,2}\*{1}!, "\n-")
 end
 
 def linkify_prs(markdown)
-  markdown.gsub(%r!(?<\!&)#(\d+)!) do |word|
+  # Match bare PR references like #1234 but skip those already linkified
+  # by release-please as [#1234](url)
+  markdown.gsub(%r{(?<!&)(?<!\[)#(\d+)}) do |word|
     "[#{word}]({{ site.repository }}/issues/#{word.delete("#")})"
   end
 end
@@ -60,8 +65,10 @@ def liquid_escape(markdown)
 end
 
 def custom_release_header_anchors(markdown)
-  header_regexp = %r!^(\d{1,2})\.(\d{1,2})\.(\d{1,2}) \/ \d{4}-\d{2}-\d{2}!
-  section_regexp = %r!^### \w+ \w+$!
+  # Match old format: "X.Y.Z / YYYY-MM-DD"
+  # Match new release-please format: "[X.Y.Z](compare-url) (YYYY-MM-DD)"
+  header_regexp = %r!^(?:\[?)(\d{1,2})\.(\d{1,2})\.(\d{1,2})(?:\]\([^)]*\))? [\(/]\s?\d{4}-\d{2}-\d{2}\)?!
+  section_regexp = %r!^### \w[\w ]*$!
   markdown.split(%r!^##\s!).map do |release_notes|
     _, major, minor, patch = *release_notes.match(header_regexp)
     release_notes
@@ -75,7 +82,8 @@ def slugify(header)
 end
 
 def remove_head_from_history(markdown)
-  index = markdown =~ %r!^##\s+\d+\.\d+\.\d+!
+  # Match both old format "## X.Y.Z" and release-please format "## [X.Y.Z]"
+  index = markdown =~ %r!^##\s+\[?\d+\.\d+\.\d+!
   markdown[index..-1]
 end
 

docs/_config.yml

@@ -1,9 +1,10 @@
 ---
-version: 4.3.1
+version: 4.4.1
 name: Jekyll • Simple, blog-aware, static sites
 description: Transform your plain text into static websites and blogs
 url: https://jekyllrb.com
 repository: https://github.com/jekyll/jekyll
+site_branch: master
 timezone: America/Los_Angeles
 twitter:
   username: jekyllrb

docs/_data/config_options/build.yml

@@ -112,10 +112,27 @@
   flag: --strict_front_matter
 
 
+- name: Web Domain URL
+  option: "url: SCHEME://HOST[:PORT]"
+  description: >-
+    The canonical URL of the root of your production deploy, composed of the following components:<br>
+    &nbsp; &nbsp;• &nbsp; Protocol scheme (e.g. <code>http://</code>)<br>
+    &nbsp; &nbsp;• &nbsp; Hostname or IP address (e.g. <code>example.org</code>)<br>
+    &nbsp; &nbsp;• &nbsp; <em>(Optional)</em> The port number of the server, prefixed with a colon
+    (e.g. <code>:8080</code>)<br>
+    The value of this configuration option should NOT have a trailing slash. It will be appended
+    with the <code>baseurl</code> to form the full URL to your Jekyll site when using the
+    <a href="/docs/liquid/filters/">Liquid filter <code>absolute_url</code></a>.<br>
+    <strong>NOTE:</strong> This setting is automatically configured to the <strong>localhost URL</strong>
+    when the <code>jekyll serve</code> command is invoked.
+
+
 - name: Base URL
-  description: Serve the website from the given base URL.
-  option: "baseurl: URL"
-  flag: -b, --baseurl URL
+  description: >-
+    Serve the website from the given base URL (the path between web-server or domain root and your landing
+    page).
+  option: "baseurl: /PATH/TO/SITE"
+  flag: -b, --baseurl /PATH/TO/SITE
 
 
 - name: Trace

docs/_data/config_options/global.yml

@@ -40,6 +40,30 @@
   description: >-
     Exclude directories and/or files from the conversion. These exclusions are relative to the site's source directory
     and cannot be outside the source directory.
+    <br />
+    This configuration option supports Ruby's <a href="https://ruby-doc.org/3.3.5/File.html#method-c-fnmatch">
+    <code>File.fnmatch</code> filename globbing patterns</a> to match multiple entries to exclude. For example,
+    you can exclude multiple README.md files in your source tree from being included in your site by specifying the
+    following <code>exclude</code> option entries: <code>["README.md", "**/README.md"]</code>.
+    <br />
+    In Jekyll 3, the <code>exclude</code> configuration option replaces the default exclusion list.
+    <br />
+    In Jekyll 4, user-provided entries get added to the default exclusion list instead and the <code>include</code>
+    option can be used to override the default exclusion list entries.
+    <br />
+    The default exclusions are found in <code>_config.yml</code> as created by <code>jekyll new</code>:
+    <ul>
+      <li><code>.sass-cache/</code></li>
+      <li><code>.jekyll-cache/</code></li>
+      <li><code>gemfiles/</code></li>
+      <li><code>Gemfile</code></li>
+      <li><code>Gemfile.lock</code></li>
+      <li><code>node_modules/</code></li>
+      <li><code>vendor/bundle/</code></li>
+      <li><code>vendor/cache/</code></li>
+      <li><code>vendor/gems/</code></li>
+      <li><code>vendor/ruby/</code></li>
+    </ul>
   option: "exclude: [DIR, FILE, ...]"
 
 
@@ -47,6 +71,13 @@
   description: >-
     Force inclusion of directories and/or files in the conversion. <code>.htaccess</code> is a good example since
     dotfiles are excluded by default.
+    <br>
+    This configuration option supports Ruby's <a href="https://ruby-doc.org/3.3.5/File.html#method-c-fnmatch-3F">
+    <code>File.fnmatch</code> filename globbing patterns</a> to match multiple entries to include, refer the
+    <code>exclude</code> configuration option for more information.
+    <br>
+    With Jekyll 4, the <code>include</code> configuration option entries override the <code>exclude</code> option
+    entries.
   option: "include: [DIR, FILE, ...]"
 
 

docs/_data/config_options/serve.yml

@@ -17,7 +17,13 @@
 
 
 - name: Live reload ignore
-  description: File glob patterns for LiveReload to ignore.
+  description: >-
+    File glob patterns for LiveReload to ignore.<br /><br />
+    Ensure that patterns are quoted when passed via the command-line to deter your shell from
+    expanding them.<br /><br /><strong>Note:</strong> The given glob patterns are matched against
+    the <code>relative_path</code> attribute of the processed resource. In the event Jekyll
+    reloads a <em>relative_path</em> matching the pattern in spite of being quoted, try listing
+    the pattern(s) under the config file option key.
   option: "livereload_ignore: [ GLOB1,... ]"
   flag: "--livereload-ignore GLOB1[,GLOB2,...]"
 
@@ -33,7 +39,10 @@
 
 
 - name: Live reload port
-  description: Port for LiveReload to listen on.
+  description: >-
+    Port for LiveReload to listen on.<br/><em>Ability to override via config file introduced in
+    <span class="version-badge">4.4.0</span></em>.
+  option: "livereload_port: PORT"
   flag: "--livereload-port PORT"
 
 

docs/_data/jekyll_variables.yml

@@ -16,6 +16,9 @@ global:
     description: >-
       Layout specific information + the <a href="/docs/front-matter/">front matter</a>.
       Custom variables set via front matter in layouts will be available here.
+  - name: jekyll
+    description: >-
+      Jekyll-centric information will be available here. See below for details.
   - name: theme
     description: >-
       Theme-gem specific information as defined in the theme's gemspec. Useful for rendering
@@ -95,38 +98,44 @@ site:
 page:
   - name: page.content
     description: >-
-      The content of the Page, rendered or un-rendered depending upon
-      what Liquid is being processed and what <code>page</code> is.
+      The content of the Page, rendered or un-rendered depending upon what Liquid is being processed
+      and what <code>page</code> is.
   - name: page.title
     description: >-
-      The title of the Page.
+      The title of the Page or Document resource.
   - name: page.excerpt
     description: >-
-      The un-rendered excerpt of a document.
+      The un-rendered excerpt of a Page or Document. Can be overridden in the
+      <a href="/docs/front-matter/">front matter</a>. It can either be disabled atomically for
+      certain page or document by setting an empty string to an <code>excerpt_separator</code> key in
+      the front matter of desired resource or disabled site-wide by setting the same as a top-level
+      key in the config file.
   - name: page.url
     description: >-
       The URL of the Post without the domain, but with a leading slash, e.g.
       <code>/2008/12/14/my-post.html</code>
   - name: page.date
     description: >-
-      The Date assigned to the Post. This can be overridden in a Post’s front matter by specifying
+      The Date assigned to the Post. This can be overridden in a Post's front matter by specifying
       a new date/time in the format <code>YYYY-MM-DD HH:MM:SS</code> (assuming UTC), or
       <code>YYYY-MM-DD HH:MM:SS +/-TTTT</code> (to specify a time zone using an offset from UTC.
-      e.g. <code>2008-12-14 10:30:00 +0900</code>).
+      e.g. <code>2008-12-14 10:30:00 +0900</code>). Not applicable to Pages.
   - name: page.id
     description: >-
       An identifier unique to a document in a Collection or a Post (useful in RSS feeds). e.g.
-      <code>/2008/12/14/my-post</code><code>/my-collection/my-document</code>
+      <code>/2008/12/14/my-post</code><code>/my-collection/my-document</code>. Not applicable to
+      Pages.
   - name: page.categories
     description: >-
       The list of categories to which this post belongs. Categories are derived from the directory
       structure above the <code>_posts</code> directory. For example, a post at
       <code>/work/code/_posts/2008-12-24-closures.md</code> would have this field set to
       <code>['work', 'code']</code>. These can also be specified in the
-      <a href="/docs/front-matter/">front matter</a>.
+      <a href="/docs/front-matter/">front matter</a>. Note: Path-based categories may not work for
+      documents in user-defined collections.
   - name: page.collection
     description: >-
-      The label of the collection to which this document belongs. e.g. <code>posts</code> for a post, or
+      The label of the collection to which a Document belongs. e.g. <code>posts</code> for a post, or
       <code>puppies</code> for a document at path <code>_puppies/rover.md</code>. If not part of a
       collection, an empty string is returned.
   - name: page.tags
@@ -135,16 +144,29 @@ page:
       <a href="/docs/front-matter/">front matter</a>.
   - name: page.dir
     description: >-
-      The path between the source directory and the file of the post or page,  e.g.
-      <code>/pages/</code>.
-      This can be overridden by <code>permalink</code> in the <a href="/docs/front-matter/">front matter</a>.
+      The path between the source directory and the file of a page, e.g. <code>/pages/</code> when the page
+      is at path <code>pages/about.md</code> relative to the source directory. This is derived from the
+      <code>url</code> attribute of the page and can therefore be overridden via the <code>permalink</code>
+      key in the <a href="/docs/front-matter/">front matter</a>. NOTE: This variable is not applicable to
+      posts and documents in user-defined collections. Use the <code>categories</code> variable to get similar
+      info for posts.
   - name: page.name
     description: >-
       The filename of the post or page, e.g. <code>about.md</code>
   - name: page.path
     description: >-
-      The path to the raw post or page. Example usage: Linking back to the page or post’s source
-      on GitHub. This can be overridden in the <a href="/docs/front-matter/">front matter</a>.
+      The path to the raw post or page, relative to the source directory. Example usage: Using a combination
+      of the repository's blob URL and this page variable to get the full URL to the file in the repository.
+      This can be overridden in the <a href="/docs/front-matter/">front matter</a>.
+  - name: page.slug
+    description: >-
+      The filename of a Document resource without its extension (or date prefixes for a post). For example,
+      slug for a post at URL <code>/2017/02/22/my-new-post.html</code>, would be <code>my-new-post</code>.
+      Can be overridden in the <a href="/docs/front-matter/">front matter</a>.
+  - name: page.ext
+    description: >-
+      The file extension of a Document resource. For example, <code>.html</code>. Can be overridden in the
+      <a href="/docs/front-matter/">front matter</a>.
   - name: page.next
     description: >-
       The next post relative to the position of the current post in <code>site.posts</code>.
@@ -154,6 +176,12 @@ page:
       The previous post relative to the position of the current post in <code>site.posts</code>.
       Returns <code>nil</code> for the first entry.
 
+jekyll:
+  - name: jekyll.version
+    description: Version of Jekyll used to build the site.
+  - name: jekyll.environment
+    description: Value assigned to environment variable <code>JEKYLL_ENV</code> during a build.
+
 theme:
   - name: theme.root
     description: >-

docs/_data/permalinks.yml

@@ -0,0 +1,139 @@
+placeholders:
+  - name: year
+    desc: >-
+      Year from the post's filename with four digits. May be overridden via the document's
+      <code>date</code> front matter.
+  - name: short_year
+    desc: >-
+      Year from the post's filename without the century. (00..99) May be overridden via the
+      document's <code>date</code> front matter.
+  - name: month
+    desc: >-
+      Month from the post's filename. (01..12) May be overridden via the document's
+      <code>date</code> front matter.
+  - name: i_month
+    desc: >-
+      Month without leading zeros from the post's filename. May be overridden via the document's
+      <code>date</code> front matter.
+  - name: short_month
+    desc: >-
+      Three-letter month abbreviation, e.g. "Jan".
+  - name: long_month
+    intro_ver: "4.0"
+    desc: >-
+      Full month name, e.g. "January".
+  - name: day
+    desc: >-
+      Day of the month from the post's filename. (01..31) May be overridden via the document's
+      <code>date</code> front matter.
+  - name: i_day
+    desc: >-
+      Day of the month without leading zeros from the post's filename. May be overridden via the
+      document's <code>date</code> front matter.
+  - name: y_day
+    desc: >-
+      Ordinal day of the year from the post's filename, with leading zeros. (001..366)
+  - name: w_year
+    intro_ver: "4.0"
+    desc: >-
+      Week year which may differ from the month year for up to three days at the start of January
+      and end of December
+  - name: week
+    intro_ver: "4.0"
+    desc: >-
+      Week number of the current year, starting with the first week having a majority of its days
+      in January. (01..53)
+  - name: w_day
+    intro_ver: "4.0"
+    desc: >-
+      Day of the week, starting with Monday. (1..7)
+  - name: short_day
+    intro_ver: "4.0"
+    desc: >-
+      Three-letter weekday abbreviation, e.g. "Sun".
+  - name: long_day
+    intro_ver: "4.0"
+    desc: >-
+      Weekday name, e.g. "Sunday".
+  - name: hour
+    desc: >-
+      Hour of the day, 24-hour clock, zero-padded from the post's <code>date</code> front matter. (00..23)
+  - name: minute
+    desc: >-
+      Minute of the hour from the post's <code>date</code> front matter. (00..59)
+  - name: second
+    desc: >-
+      Second of the minute from the post's <code>date</code> front matter. (00..59)
+  - name: title
+    desc: >-
+      Title from the document's filename. May be overridden via the document's
+      <code>slug</code> front matter. Preserves case from the source.
+  - name: slug
+    desc: >-
+      Slugified title from the document's filename (any character except numbers and letters is
+      replaced as hyphen). May be overridden via the document's <code>slug</code> front matter.
+  - name: categories
+    desc: >-
+      The specified categories for this post. If a post has multiple categories, Jekyll will create
+      a hierarchy (e.g. <code>/category1/category2</code>). Also Jekyll automatically parses out
+      double slashes in the URLs, so if no categories are present, it will ignore this.
+  - name: slugified_categories
+    intro_ver: "4.1"
+    desc: >-
+      The specified categories for this post but <em>slugified</em>. If a category is a composite of
+      multiple words, Jekyll will downcase all alphabets and replace any non-alphanumeric character
+      with a hyphen. (e.g. <code>"Work 2 Progress"</code> will be converted into
+      <code>"work-2-progress"</code>). If a post has multiple categories, Jekyll will create
+      a hierarchy (e.g. <code>/work-2-progress/category2</code>). Also Jekyll automatically parses
+      out double slashes in the URLs, so if no categories are present, it will ignore this.
+  - name: output_ext
+    desc: >-
+      Extension of the output file. (Included by default and usually unnecessary.)
+
+builtin_formats:
+  - name: date
+    format: "/:categories/:year/:month/:day/:title:output_ext"
+  - name: pretty
+    format: "/:categories/:year/:month/:day/:title/"
+  - name: ordinal
+    format: "/:categories/:year/:y_day/:title:output_ext"
+  - name: weekdate
+    intro_ver: "4.0"
+    format: "/:categories/:year/W:week/:short_day/:title:output_ext"
+    note: "<code>W</code> will be prefixed to the value of <code>:week</code>"
+  - name: none
+    format: "/:categories/:title:output_ext"
+
+types:
+  documents:
+    - name: collection
+      desc: >-
+        Label of the containing collection.
+    - name: path
+      desc: >-
+        Path to the document relative to the collection's directory, including base filename of the document.
+        However, does not include the file extension.
+    - name: name
+      desc: >-
+        The document's base filename but slugified: downcased and every sequence of non-alphanumeric character
+        (including spaces) replaced by a hyphen.
+    - name: title
+      desc: >-
+        Takes on the value of front matter key <code>slug</code> if defined for the document. Otherwise takes
+        on the string value generated from the document's base filename by piping through the <code>slugify</code>
+        filter method with <code>pretty</code> option.<br/>
+        Regardless of the value taken, the case of the alphabets are preserved instead of being replaced with
+        lowercase counterparts.
+    - name: output_ext
+      desc: >-
+        Extension of the output file. (Included by default and usually unnecessary.)
+  pages:
+    - name: path
+      desc: >-
+        Path between the source directory and the base filename of the page.
+    - name: basename
+      desc: >-
+        The page's base filename.
+    - name: output_ext
+      desc: >-
+        Extension of the output file. (Included by default and usually unnecessary.)

docs/_data/ruby.yml

@@ -1,3 +1,3 @@
-min_version: 2.5.0
-current_version: 3.1.2
-current_version_output: ruby 3.1.2p20 (2022-04-12 revision 4491bb740a)
+min_version: 2.7.0
+current_version: 3.4.1
+current_version_output: ruby 3.4.1 (2024-12-25 revision 48d4efcb85)

docs/_data/showcase.yml

@@ -12,7 +12,7 @@
 #     - government
 
 - name: SiteLeaf
-  url: https://siteleaf.com
+  url: https://www.siteleaf.com/
   image: siteleaf.png
   categories:
     - software
@@ -52,7 +52,7 @@
     - marketing-site
 
 - name: Bitcoin
-  url: https://bitcoin.org/en/
+  url: https://bitcoin.org/
   image: bitcoin.png
   categories:
     - software
@@ -127,7 +127,7 @@
     - government
 
 - name: U.S. Web Design Standards
-  url: https://standards.usa.gov/
+  url: https://designsystem.digital.gov/
   image: uswds.png
   categories:
     - government
@@ -165,7 +165,7 @@
     - portfolio
 
 - name: Lattice
-  url: https://latticehq.com/
+  url: https://lattice.com/
   image: lattice.png
   categories:
     - software
@@ -196,7 +196,7 @@
     - documentation
 
 - name: Chain
-  url: https://chain.com/
+  url: https://www.chain.com/
   image: chain.png
   categories:
     - marketing-site
@@ -238,13 +238,6 @@
   categories:
     - government
 
-- name: GitHub On Demand Training
-  url: https://services.github.com/on-demand/
-  image: github-learning-lab.png
-  categories:
-    - software
-    - knowledgebase
-
 - name: TwitchCon
   url: https://www.twitchcon.com/
   image: twitchcon.png
@@ -253,13 +246,13 @@
     - conference
 
 - name: UN World Statistics
-  url: https://worldstatisticsday.org
+  url: https://worldstatisticsday.org/
   image: world-statistics-day.png
   categories:
     - government
 
 - name: Netflix Devices
-  url: https://devices.netflix.com/en/
+  url: https://devices.netflix.com/
   image: netflix.png
   categories:
     - marketing-site
@@ -301,7 +294,7 @@
     - software
 
 - name: Sketch
-  url: https://sketch.com/
+  url: https://www.sketch.com/
   image: sketch.png
   categories:
     - software

docs/_docs/collections.md

@@ -124,6 +124,16 @@ You can link to the generated page using the `url` attribute:
 ```
 {% endraw %}
 
+## Future
+
+You can configure a collection to show future items by setting the `future` metadata to `true` in the collection's configuration.
+
+```yaml
+collections:
+  staff_members:
+    future: true
+```
+
 ## Permalinks
 
 There are special [permalink variables for collections]({{ '/docs/permalinks/#collections' | relative_url }}) to

docs/_docs/configuration/sass.md

@@ -7,6 +7,9 @@ Jekyll comes bundled with [jekyll-sass-converter](https://github.com/jekyll/jeky
 
 You can further configure the plugin by adding options to your Jekyll config under the `sass` attribute. See the [plugin's documentation](https://github.com/jekyll/jekyll-sass-converter#usage) for details and for its default values.
 
+{:.note .info}
+If you see a warning in VSCode regarding `@import "main";`, you may ignore it as the same does not affect the functionality of the SCSS code in Jekyll. However, Jekyll 4 does not allow importing a `main` sass partial (`_sass/main.scss`) from a sass page of a same name, viz. `css/main.scss`.
+
 <div class="note info">
   <p>
     Note that directory paths specified in the <code>sass</code> configuration

docs/_docs/continuous-integration/circleci.md

@@ -30,8 +30,8 @@ source 'https://rubygems.org'
 
 ruby '2.7.4'
 
-gem 'jekyll'
-gem 'html-proofer'
+gem "jekyll"
+gem "html-proofer"
 ```
 
 ```yaml

docs/_docs/continuous-integration/github-actions.md

@@ -2,20 +2,35 @@
 title: GitHub Actions
 ---
 
-When building a Jekyll site with GitHub Pages, the standard flow is restricted for security reasons
-and to make it simpler to get a site setup. For more control over the build and still host the site
-with GitHub Pages you can use GitHub Actions.
+When building a Jekyll site with GitHub Pages, Jekyll runs in an environment restricted for security
+reasons, yet containing numerous [whitelisted plugins and themes][ghp-whitelist] to make it simpler
+to get a site set up.
+
+The only workaround to have control over the build environment and gemset yet use GitHub Pages to
+host the site was previously by building elsewhere and pushing the built directory contents to the
+`gh-pages` branch on your repository.
+
+However, GitHub now provides you with the option to use their in-house CI/CD product named
+*GitHub Actions* to *build and deploy (host)* your Jekyll site with complete control over the build
+environment and gemset.
 
 ## Advantages of using Actions
 
 ### Control over gemset
 
-- **Jekyll version** --- Instead of using the currently enabled version at `3.9.0`, you can use any
-  version of Jekyll you want. For example `{{site.version}}`, or point directly to the repository.
-- **Plugins** --- You can use any Jekyll plugins irrespective of them being on the
-  [supported versions][ghp-whitelist] list, even `*.rb` files placed in the `_plugins` directory
-  of your site.
-- **Themes** --- While using a custom theme is possible without Actions, it is now simpler.
+- **Jekyll version** --- Instead of using the classic GitHub Pages-provided version specified in
+  the [Dependency versions][ghp-whitelist] list, you can use any version of Jekyll you want.
+  For example `{{ site.version }}`, or point directly to the repository via the Gemfile.
+- **Plugins** --- You can use any Jekyll plugins irrespective of them being whitelisted by GitHub,
+  including any `*.rb` files placed in the `_plugins` directory of your site.
+- **Themes** --- While using a custom theme is possible without Actions, it is now possible to use
+  themes depending on features introduced in newer versions of Jekyll.
+
+{: .note .info}
+If you are migrating from the classic flow but want to keep using a GitHub-hosted theme, you may use
+the [jekyll-remote-theme][remote-theme] plugin, add any required dependencies of your theme
+(previously bundled by default) into your `_config.yml` and `Gemfile` and set the
+`remote_theme: <owner>/<repo_name>` theme repository slug correctly in your `_config.yml`.
 
 ### Workflow Management
 
@@ -23,6 +38,8 @@ with GitHub Pages you can use GitHub Actions.
   steps, use environment variables.
 - **Logging** --- The build log is visible and can be tweaked to be verbose, so it is much easier to
   debug errors using Actions.
+- **Caching** --- The `ruby/setup-ruby` action makes it possible to cache installed gems
+  automatically instead of having to download the bundle on each build.
 
 ## Workspace setup
 
@@ -30,18 +47,7 @@ The first and foremost requirement is a Jekyll project hosted at GitHub. Choose
 project or follow the [quickstart]({{ '/docs/' | relative_url }}) and push the repository to GitHub
 if it is not hosted there already.
 
-We're only going to cover builds from the `main` branch in this page. Therefore, ensure that you
-are working on the `main` branch. If necessary, you may create it based on your default branch.
-When the Action builds your site, the contents of the _destination_ directory will be automatically
-pushed to the `gh-pages` branch with a commit, ready to be used for serving.
-
-{: .note .warning}
-The Action we're using here will create (or reset an existing) `gh-pages` branch on every successful
-deploy.<br/> So, if you have an existing `gh-pages` branch that is used to deploy your production
-build, ensure to make a backup of the contents into a different branch so that you can rollback
-easily if necessary.
-
-The Jekyll site we'll be using for the rest of this page initially consists of just a `_config.yml`,
+The Jekyll site we'll be using for the rest of this page, initially consists of just a `_config.yml`,
 an `index.md` page and a `Gemfile`. The contents are respectively:
 
 ```yaml
@@ -71,10 +77,10 @@ Welcome to My Home Page
 
 source 'https://rubygems.org'
 
-gem 'jekyll', '~> 4.2'
+gem "jekyll", "~> 4.2"
 
 group :jekyll_plugins do
-  gem 'jekyll-timeago', '~> 0.13.1'
+  gem "jekyll-timeago", "~> 0.13.1"
 end
 ```
 
@@ -91,96 +97,17 @@ was generated with an old version of Bundler.
 
 ### Setting up the Action
 
-GitHub Actions are registered for a repository by using a YAML file inside the directory path
-`.github/workflows` (note the dot at the start). For simplicity, here we use one of the
-[Jekyll Actions](#external-links) to show you how to use the action.
-
-Create a **workflow file**, say `github-pages.yml`, using either the GitHub interface or by pushing
-a YAML file to the workflow directory path manually. The base contents are:
-
-{% raw %}
-
-```yaml
-name: Build and deploy Jekyll site to GitHub Pages
-
-on:
-  push:
-    branches:
-      - main # or master before October 2020
-
-jobs:
-  github-pages:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v2
-      - uses: actions/cache@v2
-        with:
-          path: vendor/bundle
-          key: ${{ runner.os }}-gems-${{ hashFiles('**/Gemfile') }}
-          restore-keys: |
-            ${{ runner.os }}-gems-
-      - uses: helaili/jekyll-action@2.0.5    # Choose any one of the Jekyll Actions
-        with:                                # Some relative inputs of your action
-          token: ${{ secrets.GITHUB_TOKEN }}
-```
-
-{% endraw %}
-
-The above workflow can be explained as the following:
-
-- We trigger the build using **on.push** condition for `main` branch only --- this prevents
-  the Action from overwriting the `gh-pages` branch on any feature branch pushes.
-- The **name** of the job matches our YAML filename: `github-pages`.
-- The **checkout** action takes care of cloning your repository.
-- The **cache** action is an optimization to avoid fetching and installing gems on every build.
-- We specify our selected **action** and **version number** using `helaili/jekyll-action@2.0.5`,
-  this handles the build and deploy. You can choose any one of the Jekyll Actions that matches
-  your project and flavor from [GitHub Marketplace](https://github.com/marketplace?type=actions&query=jekyll+action).
-- We set a reference to a secret **environment variable** for the action to use. The `GITHUB_TOKEN`
-  is a secret token automatically initialized at the start of every workflow run.
-  More information can be found in [GitHub documentation](https://docs.github.com/en/actions/security-guides/automatic-token-authentication#about-the-github_token-secret). 
-
-Instead of using the **on.push** condition, you could trigger your build on a **schedule** by
-using the [on.schedule] parameter. For example, here we build daily at midnight by specifying
-**cron** syntax, which can be tested at the [crontab guru] site.
-
-```yaml
-on:
-  schedule:
-    - cron: "0 0 * * *"
-```
-
-Note that this string must be quoted to prevent the asterisks from being evaluated incorrectly.
-
-[on.schedule]: https://help.github.com/en/actions/reference/workflow-syntax-for-github-actions#onschedule
-[crontab guru]: https://crontab.guru/
-
-### Providing permissions
-
-At the start of each workflow run, GitHub automatically creates a unique `GITHUB_TOKEN` secret to use in
-your workflow. You can use the `GITHUB_TOKEN` to authenticate in a workflow run. You can use the
-`GITHUB_TOKEN` by using the standard syntax for referencing secrets: `${{ secrets.GITHUB_TOKEN }}`.
-For more information, please read [GitHub's docs on token authentication][github-token-ref]
-
-[github-token-ref]: https://docs.github.com/en/actions/security-guides/automatic-token-authentication
-
-If you need a token that requires permissions that aren't available in the `GITHUB_TOKEN`, you can create
-a Personal Access Token (PAT), and set it as a secret in your repository for this action to push to the
-`gh-pages` branch:
-
-1. On your GitHub profile, under **Developer Settings**, go to the [Personal Access Tokens][tokens]
-   section.
-2. **Create** a token. Give it a name like "GitHub Actions" and ensure it has permissions to
-   `public_repos` (or the entire `repo` scope for private repository) --- necessary for the action
-   to commit to the `gh-pages` branch.
-3. **Copy** the token value.
-4. Go to your repository's **Settings** and then the **Secrets** tab.
-5. **Create** a token named `YOUR_CUSTOM_TOKEN` (_important_). Give it a value using the value copied
-   above.
+1. Go to the **Settings** tab on your repository.
+    1. Click **Pages** under **Code and automation**.
+    2. Change **Source** under **Build and deployment** from **Deploy from a branch** to **GitHub Actions**.
+2. Go to the **Actions** tab on your repository.
+    1. Start a **New workflow** and search for **Jekyll**.
+    2. Click **Configure** under the **Jekyll** workflow (not **GitHub Pages Jekyll** workflow).
+    3. Review the change and click **Commit changes**.
 
 ### Build and deploy
 
-On pushing any local changes onto `main`, the action will be triggered and the build will
+On pushing any local changes onto the default branch, the action will be triggered and the build will
 **start**.
 
 To watch the progress and see any build errors, check on the build **status** using one of the
@@ -193,40 +120,19 @@ following approaches:
 - **Actions tab**
   - Go to the repository's Actions tab. Click on the `jekyll` workflow tab.
 
-If all goes well, all steps will be green and the built assets will now exist on the `gh-pages`
-branch.
+If all goes well, all steps will be green and the built assets will be uploaded to GitHub Pages. 
 
-On a successful build, GitHub Pages will **publish** the site stored on the repository `gh-pages`
-branches. Note that you do not need to setup a `gh-pages` branch or enable GitHub Pages, as the
-action will take care of this for you.
-(For private repositories, you'll have to upgrade to a paid plan).
+To see the **live site**, go to the **Deployments** tab on your repository, and click on the deployed
+site URL.
 
-To see the **live site**:
-
-1. Go to the **environment** tab on your repository.
-2. Click **View Deployment** to see the deployed site URL.
-3. View your site at the **URL**. Make sure the `timeago` filter works as expected.
-4. Optionally **add** this URL to your repository's main page and to your `README.md`, to make it
-   easy for people to find.
-
-When you need to make further **changes** to the site, commit to `master` and push. The workflow
-will build and deploy your site again.
-
-Be sure **not to edit** the `gh-pages` branch directly, as any changes will be lost on the next
-successful deploy from the Action.
+When you need to make further **changes** to the site, commit to the default branch and push.
+The workflow will build and deploy your site again.
 
 ## External links
 
-- [jekyll-actions] is an action available on the GitHub Marketplace and was used in this guide.
-- [jekyll-actions-quickstart] is an unofficial repository that includes a live demo of the
-  `jekyll-actions` action. That project can be used as a template for making a new site.
-- [jekyll-action-ts] is another action to build and publish Jekyll sites on GiHub Pages that includes HTML formatting options with Prettier and caching.
-- [jekyll-deploy-action] is a GitHub Action to deploy the Jekyll site conveniently for GitHub Pages (An alternative action with better speed and compatibility).
+- [starter-workflows] is the official repository providing the workflow template used in this guide.
 
 [ghp-whitelist]: https://pages.github.com/versions/
+[remote-theme]: https://github.com/benbalter/jekyll-remote-theme
 [timeago-plugin]: https://rubygems.org/gems/jekyll-timeago
-[tokens]: https://github.com/settings/tokens
-[jekyll-actions]: https://github.com/marketplace/actions/jekyll-actions
-[jekyll-actions-quickstart]: https://github.com/MichaelCurrin/jekyll-actions-quickstart
-[jekyll-action-ts]: https://github.com/limjh16/jekyll-action-ts
-[jekyll-deploy-action]: https://github.com/jeffreytse/jekyll-deploy-action
+[starter-workflows]: https://github.com/actions/starter-workflows/blob/main/pages/jekyll.yml

docs/_docs/deployment/manual.md

@@ -16,12 +16,10 @@ rsync in the [Digital Ocean tutorial](https://www.digitalocean.com/community/tut
 ## Amazon S3
 
 If you want to host your site in Amazon S3, you can do so by
-using the [s3_website](https://github.com/laurilehmijoki/s3_website)
-application. It will push your site to Amazon S3 where it can be served like
-any web server,
-dynamically scaling to almost unlimited traffic. This approach has the
-benefit of being about the cheapest hosting option available for
-low-volume blogs as you only pay for what you use.
+using the AWS cli client and pushing your rendered `_site` directory directly to
+your S3 bucket.
+
+`aws s3 sync _site s3://<YOUR DOMAIN>.com --size-only --storage-class REDUCED_REDUNDANCY`
 
 ## FTP
 

docs/_docs/deployment/third-party.md

@@ -10,10 +10,6 @@ The [AWS Amplify Console](https://console.amplify.aws) provides continuous deplo
 
 Read this [step-by-step guide](https://medium.com/@jameshamann/deploy-your-jekyll-site-using-aws-amplify-with-only-a-few-clicks-8f3dd8f26112) to deploy and host your Jekyll site on AWS Amplify.
 
-## Bip
-
-[Bip](https://bip.sh) provides zero downtime deployment, a global CDN, SSL, unlimited bandwidth and more for Jekyll websites. Deploy in seconds from the command line. [Visit the Bip website](https://bip.sh) for more information - which is also built with Jekyll.
-
 ## CloudCannon
 
 [CloudCannon](https://cloudcannon.com) has everything you need to build, host
@@ -26,7 +22,7 @@ Sites on GitHub Pages are powered by Jekyll behind the scenes, so if you’re lo
 
 ## GitLab Pages
 
-[GitLab Pages](https://about.gitlab.com/stages-devops-lifecycle/pages/) offers free hosting with custom domains. [Get started with Jekyll](https://docs.gitlab.com/ee/user/project/pages/getting_started_part_four.html#practical-example) and a fully customizable pipeline.
+[GitLab Pages](https://about.gitlab.com/stages-devops-lifecycle/pages/) offers free hosting with custom domains. [Get started with Jekyll](https://docs.gitlab.com/ee/user/project/pages/getting_started/pages_from_scratch.html) and a fully customizable pipeline.
 
 ## KeyCDN
 
@@ -39,7 +35,7 @@ Use [Kickster](https://kickster.nielsenramon.com/) for automated deploys to GitH
 
 Kickster provides a basic Jekyll project setup packed with web best practices and useful optimization tools increasing your overall project quality. Kickster ships with automated and worry-free deployment scripts for GitHub Pages.
 
-Install the Kickster gem and you are good to go. More documentation can here found [here](https://github.com/nielsenramon/kickster#kickster). If you do not want to use the gem or start a new project you can just copy paste the deployment scripts for [Travis CI](https://github.com/nielsenramon/kickster/tree/master/snippets/travis) or [Circle CI](https://github.com/nielsenramon/kickster#automated-deployment-with-circle-ci).
+Install the Kickster gem and you are good to go. More documentation can be found [here](https://github.com/nielsenramon/kickster#kickster). If you do not want to use the gem or start a new project you can just copy paste the deployment scripts for [Travis CI](https://github.com/nielsenramon/kickster/tree/master/snippets/travis) or [Circle CI](https://github.com/nielsenramon/kickster#automated-deployment-with-circle-ci).
 
 ## Netlify
 
@@ -51,9 +47,9 @@ Read this [Jekyll step-by-step guide](https://www.netlify.com/blog/2020/04/02/a-
 
 [Render](https://render.com) provides zero config continuous deployment for static sites. The service is free under 100GB monthly bandwidth.
 
-## Hostman 
+## Hostman
 
-[Hostman](https://hostman.com) allows you to host websites for free with no configurations. Read [this guide](https://hostman.com/docs/jekyll) to deploy your Jekyll site on Hostman. 
+[Hostman](https://hostman.com) allows you to host websites for free with no configurations. Read [this guide](https://hostman.com/docs/jekyll) to deploy your Jekyll site on Hostman.
 
 ## Static Publisher
 
@@ -72,3 +68,19 @@ Read this [Jekyll step-by-step guide](https://www.21yunbox.com/docs/#/deploy-jek
 ## Layer0
 
 [Layer0](https://www.layer0.co) is an all-in-one platform to develop, deploy, preview, experiment on, monitor, and run your headless frontend. It is focused on large, dynamic websites and best-in-class performance through EdgeJS (a JavaScript-based Content Delivery Network), predictive prefetching, and performance monitoring. Layer0 offers a free tier. Get started in just a few minutes by following [Layer0's guide to deploying Jekyll](https://docs.layer0.co/guides/jekyll).
+
+## Kinsta Application Hosting
+
+[Kinsta Application Hosting](https://kinsta.com/application-hosting) is a Cloud Platform designed to help your company and dev teams ship web projects faster and more efficiently. You can host your apps, databases, and sites all in one place. Easily connect with GitHub and automate deployments and get 24/7 support for all your favorite languages and frameworks.
+
+Read [this guide](https://kinsta.com/docs/jekyll-static-site-example/) to learn how to deploy Jekyll site on Kinsta.
+
+## Supranode
+
+[Supranode](https://supranode.com) offers customizable continuous deployment for static websites, featuring automatic HTTPS, a high-performance CDN, secret management, deployment previews, password protection, and more.
+
+## Azion
+
+[Azion](https://www.azion.com/en/) is an web platform that provides a wide range of services. It allows you to host static sites, including Jekyll-powered websites, with features like automatic HTTPS, custom domains, and real-time analytics. Azion's platform is designed for performance and scalability, making it an excellent choice for hosting global websites.
+
+In [this guide](https://www.azion.com/en/documentation/products/guides/jekyll-boilerplate/) you can learn how to deploy a Jekyll site on Azion.

docs/_docs/history.md

@@ -4,6 +4,242 @@ permalink: "/docs/history/"
 note: This file is autogenerated. Edit /History.markdown instead.
 ---
 
+## 4.4.1 / 2025-01-29
+{: #v4-4-1}
+
+### Bug Fixes
+{: #bug-fixes-v4-4-1}
+
+- Restore globbed path behavior in front matter defaults ([#9762]({{ site.repository }}/issues/9762))
+
+
+## 4.4.0 / 2025-01-27
+{: #v4-4-0}
+
+### Minor Enhancements
+{: #minor-enhancements-v4-4-0}
+
+- Allow marking specific highlighted lines via Liquid ([#9138]({{ site.repository }}/issues/9138))
+- Add gem `csv` to runtime dependency list ([#9522]({{ site.repository }}/issues/9522))
+- Bump the minimum ruby version to 2.7 ([#9525]({{ site.repository }}/issues/9525))
+- Acknowledge `livereload_port` from site config too ([#9606]({{ site.repository }}/issues/9606))
+- Add gem `base64` as runtime dependency ([#9740]({{ site.repository }}/issues/9740))
+- Add gem `json` as runtime_dependency ([#9671]({{ site.repository }}/issues/9671))
+- Remove unnecessary constraint on gem `mercenary` ([#9758]({{ site.repository }}/issues/9758))
+
+### Bug Fixes
+{: #bug-fixes-v4-4-0}
+
+- Optimize default front matter using `File.fnmatch?` ([#9185]({{ site.repository }}/issues/9185))
+- Remove totals in profile table properly ([#9186]({{ site.repository }}/issues/9186))
+- Optimize `Site#each_site_file` ([#9187]({{ site.repository }}/issues/9187))
+- Rename sass partial created for new blank site ([#9257]({{ site.repository }}/issues/9257))
+- Fix `jekyll serve --detach` with jekyll-sass-converter 3.x ([#9304]({{ site.repository }}/issues/9304))
+- Handle TypeError from `where` filter gracefully ([#9292]({{ site.repository }}/issues/9292))
+- Add support for upcoming logger 1.4.3 ([#9392]({{ site.repository }}/issues/9392))
+- Fix typo in devcontainer.json ([#9364]({{ site.repository }}/issues/9364))
+- Correct rubocop lint errors ([#9600]({{ site.repository }}/issues/9600))
+- Fix inexistent layout warning for the default 404 page ([#9589]({{ site.repository }}/issues/9589))
+- Relax version constraint on `wdm` in new Gemfile ([#9662]({{ site.repository }}/issues/9662))
+- Fix `--livereload-ignore` option ([#9570]({{ site.repository }}/issues/9570))
+- Render theme-gem root only in development ([#9680]({{ site.repository }}/issues/9680))
+
+### Development Fixes
+{: #development-fixes-v4-4-0}
+
+- Cleanup highlight tag ([#9177]({{ site.repository }}/issues/9177))
+- Run tests in utc ([#9168]({{ site.repository }}/issues/9168))
+- Lock Ruby in CI to v3.1.2 and bump JRuby to v9.4.0.0 ([#9196]({{ site.repository }}/issues/9196))
+- Update sass related tests for jekyll-sass-converter 3.x ([#9223]({{ site.repository }}/issues/9223))
+- Split `test/test_tags.rb` into multiple files ([#9230]({{ site.repository }}/issues/9230))
+- test: use hash explicitly for Struct initializer for ruby 3.2 ([#9237]({{ site.repository }}/issues/9237))
+- script/default-site: accept flags for `jekyll new` ([#9259]({{ site.repository }}/issues/9259))
+- Bump check-spelling/check-spelling from 0.0.20 to 0.0.21 ([#9205]({{ site.repository }}/issues/9205))
+- Use check-spelling/check-spelling@v0.0.21 ([#9199]({{ site.repository }}/issues/9199))
+- Bump RuboCop to v1.45.x ([#9305]({{ site.repository }}/issues/9305))
+- Bump Rubocop to version 1.48.x ([#9326]({{ site.repository }}/issues/9326))
+- Bump versions of ruby & nodejs in devcontainer ([#9360]({{ site.repository }}/issues/9360))
+- Bump rubocop version to 1.52.x ([#9361]({{ site.repository }}/issues/9361))
+- Upgrade RuboCop to 1.54 ([#9401]({{ site.repository }}/issues/9401))
+- Add CodeQL workflow ([#9397]({{ site.repository }}/issues/9397))
+- Bump actions/checkout from 3 to 4 ([#9442]({{ site.repository }}/issues/9442))
+- Test suite uses shoulda-context only. ([#9441]({{ site.repository }}/issues/9441))
+- Keep activesupport at version 7.0.x ([#9469]({{ site.repository }}/issues/9469))
+- Bump Rubocop to 1.56.4 ([#9459]({{ site.repository }}/issues/9459))
+- Configure dependabot to handle rubygems dependencies ([#9445]({{ site.repository }}/issues/9445))
+- Update rubocop gem ([#9476]({{ site.repository }}/issues/9476))
+- Fix Performance/StringIdentifierArgument violation in site.rb and allow activesupport 6 for windows tests ([#9512]({{ site.repository }}/issues/9512))
+- Add a few more emeritus team members ([#9535]({{ site.repository }}/issues/9535))
+- Make custom cop inherit `RuboCop::Cop::Base` ([#9597]({{ site.repository }}/issues/9597))
+- CI: Use JRuby 9.4.8.0 ([#9654]({{ site.repository }}/issues/9654))
+- Stop testing with Cucumber on JRuby ([#9661]({{ site.repository }}/issues/9661))
+- Windows CI on GitHub Actions ([#9659]({{ site.repository }}/issues/9659))
+- Run GitHub Actions only if needed ([#9664]({{ site.repository }}/issues/9664))
+- Format `.rubocop.yml` via a rake task ([#9687]({{ site.repository }}/issues/9687))
+- Configure some new cops ([#9688]({{ site.repository }}/issues/9688))
+- Fix expected markup per WAI-ARIA requirements ([#9737]({{ site.repository }}/issues/9737))
+- Add an optional `:rdoc` group of gems ([#9742]({{ site.repository }}/issues/9742))
+- Test `inspect` filter with custom object ([#9743]({{ site.repository }}/issues/9743))
+- Bump cucumber to v9 ([#9747]({{ site.repository }}/issues/9747))
+- Add Ruby 3.4 to CI matrix ([#9740]({{ site.repository }}/issues/9740))
+- Remove unnecessary runtime dependency ([#9753]({{ site.repository }}/issues/9753))
+- Bump `check-spelling/check-spelling` action ([#9756]({{ site.repository }}/issues/9756))
+
+### Documentation
+
+- Fix Nested tree navigation with recursion example ([#9174]({{ site.repository }}/issues/9174))
+- Fix typo on website ([#9203]({{ site.repository }}/issues/9203))
+- Publish post on major release of sass-converter ([#9225]({{ site.repository }}/issues/9225))
+- Update Jekyll on macOS (macos.md) and current ruby version to 3.1.3 in ruby.yml ([#9195]({{ site.repository }}/issues/9195))
+- Add release post for v4.3.2 ([#9263]({{ site.repository }}/issues/9263))
+- Grammatical reordering in  3-to-4 upgrading docs ([#9245]({{ site.repository }}/issues/9245))
+- fixed grammatical mistake on "showcase" page ([#9264]({{ site.repository }}/issues/9264))
+- Mark `highlight` `mark_lines` feature as 4.4 in docs ([#9184]({{ site.repository }}/issues/9184))
+- Add v3.9.3 release history & post to `master` branch ([#9284]({{ site.repository }}/issues/9284))
+- Update S3 deployment to remove s3_website ([#9221]({{ site.repository }}/issues/9221))
+- Document Exclude behavior, Include overrides and the default exclusion list ([#9376]({{ site.repository }}/issues/9376))
+- Update macos.md, remove Catalina (macOS 10.15) ([#9405]({{ site.repository }}/issues/9405))
+- Update macos.md, add support for Ventura ([#9406]({{ site.repository }}/issues/9406))
+- Typo fix - update to hooks and 3rd party deployment and one other article ([#9411]({{ site.repository }}/issues/9411))
+- Update 07-assets.md ([#9393]({{ site.repository }}/issues/9393))
+- Mention the front matter requirement in pages.md ([#9423]({{ site.repository }}/issues/9423))
+- Point to the Rouge GitHub repo rather than broken website ([#9362]({{ site.repository }}/issues/9362))
+- Add new theme directory to themes resources ([#9356]({{ site.repository }}/issues/9356))
+- Adds Kinsta to 3rd party deployments ([#9331]({{ site.repository }}/issues/9331))
+- Update Fedora prerequisites to include g++ ([#9290]({{ site.repository }}/issues/9290))
+- Update convert-site-to-jekyll.md ([#9348]({{ site.repository }}/issues/9348))
+- Update github-actions documentation ([#9426]({{ site.repository }}/issues/9426))
+- Update resources.md ([#9449]({{ site.repository }}/issues/9449))
+- Add GitHub Pages helpful notes ([#9235]({{ site.repository }}/issues/9235))
+- Clarify which version of Jekyll needs 'jekyll-paginate' ([#9477]({{ site.repository }}/issues/9477))
+- chore: update showcases ([#9473]({{ site.repository }}/issues/9473))
+- Add FreeBSD installation instructions ([#9481]({{ site.repository }}/issues/9481))
+- Fix broken link for the security team page ([#9497]({{ site.repository }}/issues/9497))
+- Fix broken links for several Jekyll integrations ([#9496]({{ site.repository }}/issues/9496))
+- Add release post for v4.3.3 ([#9511]({{ site.repository }}/issues/9511))
+- Add docs version badge to page_excerpts feature ([#9520]({{ site.repository }}/issues/9520))
+- Improve accessibility of the docs ([#9338]({{ site.repository }}/issues/9338))
+- Fix gem quote consistency on docs ([#9517]({{ site.repository }}/issues/9517))
+- Make site search work again ([#9530]({{ site.repository }}/issues/9530))
+- Jekyll docs template typo - All pages show "Deployment" ([#9548]({{ site.repository }}/issues/9548))
+- Fixed: Wrong navigation style on the right side of news and docs pages ([#9586]({{ site.repository }}/issues/9586))
+- Add redirect for step-by-step tutorial ([#9593]({{ site.repository }}/issues/9593))
+- Add Jekyll 3.10.0 release post & history ([#9625]({{ site.repository }}/issues/9625))
+- Fix minor docs error ([#9641]({{ site.repository }}/issues/9641))
+- Update windows.md ([#9644]({{ site.repository }}/issues/9644))
+- Document keys of global variable {% raw %}`{{ jekyll }}`{% endraw %} ([#9653]({{ site.repository }}/issues/9653))
+- Fix incorrect and inconsistent variables in the permalinks page ([#9591]({{ site.repository }}/issues/9591))
+- Fix lapses in documentation of page variables ([#9667]({{ site.repository }}/issues/9667))
+- Add note about VSCode warning for SCSS files ([#9609]({{ site.repository }}/issues/9609))
+- docs: Fix incorrect parentheses ([#9629]({{ site.repository }}/issues/9629))
+- docs: Fix of a bug in the pagination section ([#8890]({{ site.repository }}/issues/8890))
+- Update current Ruby version renders and macOS docs ([#9614]({{ site.repository }}/issues/9614))
+- Improve docs around using GitHub Actions to build and deploy Jekyll sites ([#9682]({{ site.repository }}/issues/9682))
+- Fix grammar in the description of `page.excerpt` variable ([#9689]({{ site.repository }}/issues/9689))
+- Render HTML tables at `/docs/permalinks/` using a data file ([#9666]({{ site.repository }}/issues/9666))
+- Fix HTML attribute separation whitespace placement in the Navigation include code of Assets step of the Step by Step Tutorial ([#9695]({{ site.repository }}/issues/9695))
+- Fix missing glob matching pattern support description in the documentation of the `include` and `exclude` configuration options ([#9697]({{ site.repository }}/issues/9697))
+- Fix missing `url` configuration option documentation ([#9699]({{ site.repository }}/issues/9699))
+- Link to GitHub Pages Dependency versions page instead of explicitly specifying Jekyll version ([#9715]({{ site.repository }}/issues/9715))
+- Fix broken link on third-party.md ([#9704]({{ site.repository }}/issues/9704))
+- Fix: remove inaccessible links and their descriptions ([#9745]({{ site.repository }}/issues/9745))
+- Add release post for v4.4.0 ([#9759]({{ site.repository }}/issues/9759))
+
+### Site Enhancements
+{: #site-enhancements-v4-4-0}
+
+- Extract markup for `Improve this page` into an inclusion ([#9675]({{ site.repository }}/issues/9675))
+
+
+## 4.3.4 / 2024-09-16
+{: #v4-3-4}
+
+### Bug Fixes
+{: #bug-fixes-v4-3-4}
+
+- Backport [#9662]({{ site.repository }}/issues/9662) for v4.3.x: Relax version constraint on wdm in new Gemfile ([#9683]({{ site.repository }}/issues/9683))
+- Backport [#9680]({{ site.repository }}/issues/9680) for v4.3.x: Render theme-gem root only in development ([#9684]({{ site.repository }}/issues/9684))
+
+### Development Fixes
+{: #development-fixes-v4-3-4}
+
+- Sync workflows with counterparts on `master` ([#9681]({{ site.repository }}/issues/9681))
+
+
+## 4.3.3 / 2023-12-27
+{: #v4-3-3}
+
+### Bug Fixes
+{: #bug-fixes-v4-3-3}
+
+- Backport [#9392]({{ site.repository }}/issues/9392) for v4.3.x: Fix backward compatibility issues in the Logger ([#9510]({{ site.repository }}/issues/9510))
+
+### Development Fixes
+{: #development-fixes-v4-3-3}
+
+- Backport [#9237]({{ site.repository }}/issues/9237) for v4.3.x: Use Hash explicitly for Struct initializer ([#9285]({{ site.repository }}/issues/9285))
+
+
+## 3.10.0 / 2024-06-23
+{: #v3-10-0}
+
+### Minor Enhancements
+{: #minor-enhancements-v3-10-0}
+
+- Backport add-csv-dependency from [#9522]({{ site.repository }}/issues/9522) to Jekyll 3 ([#9616]({{ site.repository }}/issues/9616))
+- 3.10-stable: Add webrick as a dependency ([#9620]({{ site.repository }}/issues/9620))
+
+
+## 3.9.5 / 2024-02-12
+{: #v3-9-5}
+
+### Minor Enhancements
+{: #minor-enhancements-v3-9-5}
+
+- 3.9-stable: allow Pages to be Excerpted ([#9550]({{ site.repository }}/issues/9550))
+
+
+## 3.9.4 / 2023-12-28
+{: #v3-9-4}
+
+### Bug Fixes
+{: #bug-fixes-v3-9-4}
+
+- Backport [#9392]({{ site.repository }}/issues/9392) for v3.9.x: Add support for Ruby 3.3 Logger ([#9513]({{ site.repository }}/issues/9513))
+
+
+## 3.9.3 / 2023-01-29
+{: #v3-9-3}
+
+### Bug Fixes
+{: #bug-fixes-v3-9-3}
+
+- 3.9.x: Support i18n 1.x ([#9269]({{ site.repository }}/issues/9269))
+- Backport [#8880]({{ site.repository }}/issues/8880) for v3.9.x: Support both tzinfo v1 and v2 along with non-half hour offsets ([#9280]({{ site.repository }}/issues/9280))
+
+### Development Fixes
+{: #development-fixes-v3-9-3}
+
+- v3.9.x: test under Ruby 3.2 [#9272]({{ site.repository }}/issues/9272))
+- v3.9.x: fix rdiscount test ([#9277]({{ site.repository }}/issues/9277))
+
+
+## 4.3.2 / 2023-01-20
+{: #v4-3-2}
+
+### Bug Fixes
+{: #bug-fixes-v4-3-2}
+
+- Backport [#9257]({{ site.repository }}/issues/9257) for v4.3.x: Rename sass partial created for new blank site ([#9262]({{ site.repository }}/issues/9262))
+- Backport [#9187]({{ site.repository }}/issues/9187) for v4.3.x: Optimize `Site#each_site_file` ([#9256]({{ site.repository }}/issues/9256))
+- Backport [#9186]({{ site.repository }}/issues/9186) for v4.3.x: Remove totals in profile table properly ([#9255]({{ site.repository }}/issues/9255))
+
+### Development Fixes
+{: #development-fixes-v4-3-2}
+
+- Backport [#9223]({{ site.repository }}/issues/9223) for 4.3.x: Update sass related tests for jekyll-sass-converter 3.x ([#9254]({{ site.repository }}/issues/9254))
+
+
 ## 4.3.1 / 2022-10-26
 {: #v4-3-1}
 

docs/_docs/installation.md

@@ -18,5 +18,6 @@ For detailed install instructions, follow the guide for your operating system.
 
 * [macOS]({{ '/docs/installation/macos/' | relative_url }})
 * [Ubuntu]({{ '/docs/installation/ubuntu/' | relative_url }})
+* [FreeBSD]({{ '/docs/installation/freebsd/' | relative_url }})
 * [Other Linux]({{ '/docs/installation/other-linux/' | relative_url }})
 * [Windows]({{ '/docs/installation/windows/' | relative_url }})

docs/_docs/installation/freebsd.md

@@ -0,0 +1,50 @@
+---
+title: Jekyll on FreeBSD
+permalink: /docs/installation/freebsd/
+---
+
+### Install Ruby
+
+```sh
+sudo pkg install ruby
+```
+
+### Install Ruby Gems
+
+Find the latest version and install it. (Replace `ruby3x` with whatever the latest version is.)
+
+```sh
+pkg search gems
+sudo pkg install ruby3x-gems
+```
+
+## Set Gems directory and add that to the Bash path
+
+Avoid installing RubyGems packages (called gems) as the root user. Instead,
+set up a gem installation directory for your user account. The following
+commands will add environment variables to your `~/.bashrc` file to configure
+the gem installation path:
+
+```sh
+echo '# Install Ruby Gems to ~/gems' >> ~/.bashrc
+echo 'export GEM_HOME="$HOME/gems"' >> ~/.bashrc
+echo 'export PATH="$HOME/gems/bin:$PATH"' >> ~/.bashrc
+source ~/.bashrc
+```
+
+## Install Jekyll Gems
+
+```sh
+gem install jekyll bundler jekyll-sitemap
+```
+
+## Verify install
+
+Both of these commands should return some output showing version number, etc.
+
+```sh
+ruby -v
+jekyll -v
+```
+
+That's it! You're ready to start using Jekyll.

docs/_docs/installation/macos.md

@@ -5,9 +5,7 @@ permalink: /docs/installation/macos/
 
 ## Supported macOS versions
 
-- Monterey (macOS 12)
-- Big Sur (macOS 11)
-- Catalina (macOS 10.15)
+We match [Homebrew's macOS requirements](https://docs.brew.sh/Installation#macos-requirements), which typically support the last 2 or 3 macOS versions.
 
 Older macOS versions might work, but we don't officially support them.
 
@@ -48,13 +46,13 @@ Jekyll on your Mac, or if you run into any issues, read that guide.
 Install `chruby` and `ruby-install` with Homebrew:
 
 ```sh
-brew install chruby ruby-install xz
+brew install chruby ruby-install
 ```
 
-Install the latest stable version of Ruby:
+Install the latest stable version of Ruby (supported by Jekyll):
 
 ```sh
-ruby-install ruby
+ruby-install ruby {{ site.data.ruby.current_version }}
 ```
 
 This will take a few minutes, and once it's done, configure your shell to 

docs/_docs/installation/other-linux.md

@@ -10,7 +10,7 @@ Installation on other Linux distributions works similarly to installing on [Ubun
 ### Fedora
 
 ```sh
-sudo dnf install ruby ruby-devel openssl-devel redhat-rpm-config @development-tools
+sudo dnf install ruby ruby-devel openssl-devel redhat-rpm-config gcc-c++ @development-tools
 ```
 ### RHEL8/CentOS8
 
@@ -40,7 +40,7 @@ sudo emerge --ask --verbose jekyll
 ### ArchLinux
 
 ```sh
-sudo pacman -S ruby base-devel
+sudo pacman -S ruby base-devel ruby-erb
 ```
 
 ### OpenSUSE

docs/_docs/installation/windows.md

@@ -24,7 +24,7 @@ We only cover RubyInstaller-2.4 and newer here. Older versions need to
 2. Run the `ridk install` step on the last stage of the installation wizard. This is needed for installing gems with native
    extensions. You can find additional information regarding this in the
    [RubyInstaller Documentation](https://github.com/oneclick/rubyinstaller2#using-the-installer-on-a-target-system).
-   From the options choose `MSYS2 and MINGW development tool chain`.
+   From the options choose `MSYS2 and MINGW development toolchain`.
 3. Open a new command prompt window from the start menu, so that changes to the `PATH` environment variable becomes effective.
    Install Jekyll and Bundler using `gem install jekyll bundler`
 4. Check if Jekyll has been installed properly: `jekyll -v`
@@ -45,37 +45,9 @@ You must have [Windows Subsystem for Linux](https://msdn.microsoft.com/en-us/com
 
 Make sure all your packages and repositories are up to date. Open a new Command Prompt or PowerShell window and type `bash`.
 
-Your terminal should now be a Bash instance. Next, update your repository lists and packages:
+Your terminal should now be a Bash instance. Then, [follow the installation procedure for Ubuntu](https://jekyllrb.com/docs/installation/ubuntu/).
 
-```sh
-sudo apt-get update -y && sudo apt-get upgrade -y
-```
-
-Next, install Ruby. To do this, let's use a repository from [BrightBox](https://www.brightbox.com/docs/ruby/ubuntu/),
-which hosts optimized versions of Ruby for Ubuntu.
-
-```sh
-sudo apt-add-repository ppa:brightbox/ruby-ng
-sudo apt-get update
-sudo apt-get install ruby2.5 ruby2.5-dev build-essential dh-autoreconf
-```
-
-Next, update your Ruby gems:
-
-```sh
-gem update
-```
-
-Install Jekyll:
-
-```sh
-gem install jekyll bundler
-```
-
-{: .note .info}
-  No `sudo` here.
-
-Check your Jekyll version:
+Once this is done, check your Jekyll version:
 
 ```sh
 jekyll -v
@@ -138,7 +110,7 @@ While `listen` has built-in support for UNIX systems, it may require an extra ge
 Add the following to the `Gemfile` for your site if you have issues with auto-regeneration on Windows alone:
 
 ```ruby
-gem 'wdm', '~> 0.1.1', :install_if => Gem.win_platform?
+gem "wdm", "~> 0.2.0", :install_if => Gem.win_platform?
 ```
 
 You have to use a [Ruby+Devkit](https://rubyinstaller.org/downloads/) version of the RubyInstaller and install

docs/_docs/liquid/tags.md

@@ -15,7 +15,7 @@ If you have page snippets that you use repeatedly across your site, an
 ## Code snippet highlighting
 
 Jekyll has built in support for syntax highlighting of over 100 languages
-thanks to [Rouge](http://rouge.jneen.net). Rouge is the default highlighter
+thanks to [Rouge](https://github.com/rouge-ruby/rouge). Rouge is the default highlighter
 in Jekyll 3 and above.
 
 {: .note .warning}
@@ -66,6 +66,26 @@ end
 ```
 {% endraw %}
 
+### Marking specific lines {%- include docs_version_badge.html version="4.4.0" -%}
+{: #marking-specific-lines }
+
+You can mark specific lines in a code snippet by using the optional
+argument `mark_lines`. This argument takes a space-separated list of
+line numbers which must be wrapped in double quotes. For example, the
+following code block will mark lines 1 and 2 but not line 3:
+
+{% raw %}
+```liquid
+{% highlight ruby mark_lines="1 2" %}
+def foo
+  puts 'foo'
+end
+{% endhighlight %}
+```
+{% endraw %}
+
+A default class name of `hll` will be applied to the marked lines.
+
 ### Stylesheets for syntax highlighting
 
 In order for the highlighting to show up, you’ll need to include a highlighting
@@ -168,3 +188,25 @@ You can also use this tag to create a link to a post in Markdown as follows:
 [Name of Link]({% post_url 2010-07-21-name-of-post %})
 ```
 {% endraw %}
+
+Now lets say you have a [datafile]({{ '/docs/datafiles/' | relative_url }}) `_data/cool_posts.yaml` used to keep track
+of certain posts that you intend to be listed as say *Cool Posts*:
+
+```yaml
+- title: "An Awesome Post"
+  slug: "2010-07-21-name-of-post"
+- title: "Another Awesome Post"
+  slug: "2016-07-26-name-of-post"
+```
+
+You may list such posts using the `post_url` tag as well (from {%- include docs_version_badge.html version="4.5.0" -%}):
+
+{% raw %}
+```liquid
+Cool posts:
+
+{%- for cool_post in site.data.cool_posts %}
+- [{{ cool_post.title }}]({% post_url {{ cool_post.slug }} %})
+{%- endfor %}
+```
+{% endraw %}

docs/_docs/pages.md

@@ -9,7 +9,7 @@ members or recipes).
 
 The simplest way of adding a page is to add an HTML file in the root
 directory with a suitable filename. You can also write a page in Markdown using
-a `.md` extension which converts to HTML on build. For a site with
+a `.md` extension and front matter which converts to HTML on build. For a site with
 a homepage, an about page, and a contact page, here’s what the root directory
 and associated URLs might look like:
 
@@ -35,7 +35,6 @@ If you have a lot of pages, you can organize them into subfolders. The same subf
 
 You might want to have a particular folder structure for your source files that changes for the built site. With [permalinks](/docs/permalinks/) you have full control of the output URL.
 
-## Excerpts for pages
+## Excerpts for pages {%- include docs_version_badge.html version="4.1.1" -%}
 
-From Jekyll 4.1.1 onwards, one can *choose* to generate excerpts for their pages by setting `page_excerpts` to `true` in their
-config file.
+One can *choose* to generate excerpts for their pages by setting `page_excerpts` to `true` in their config file.

docs/_docs/pagination.md

@@ -8,8 +8,9 @@ break the main listing of posts up into smaller lists and display them over
 multiple pages. Jekyll offers a pagination plugin, so you can automatically
 generate the appropriate files and folders you need for paginated listings.
 
-For Jekyll 3, include the `jekyll-paginate` plugin in your Gemfile and in
-your `_config.yml` under `plugins`. For Jekyll 2, this is standard.
+For Jekyll 3 or higher, include the `jekyll-paginate` plugin in your
+Gemfile and in your `_config.yml` under `plugins`. For Jekyll 2, this is
+standard.
 
 <div class="note info">
   <h5>Pagination only works within HTML files</h5>
@@ -154,7 +155,7 @@ page with links to all but the current page.
     {% if page == paginator.page %}
       <em>{{ page }}</em>
     {% elsif page == 1 %}
-      <a href="{{ '/' | relative_url }}">{{ page }}</a>
+      <a href="{{ site.paginate_path | relative_url | replace: 'page:num/', '' }}">{{ page }}</a>
     {% else %}
       <a href="{{ site.paginate_path | relative_url | replace: ':num', page }}">{{ page }}</a>
     {% endif %}

docs/_docs/permalinks.md

@@ -55,237 +55,16 @@ Here's the full list of placeholders available:
     </tr>
   </thead>
   <tbody>
+    {%- for entry in site.data.permalinks.placeholders %}
     <tr>
-      <td>
-        <p><code>year</code></p>
-      </td>
-      <td>
-        <p>
-          Year from the post’s filename with four digits.
-          May be overridden via the document’s <code>date</code> front matter.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>short_year</code></p>
-      </td>
-      <td>
-        <p>
-          Year from the post’s filename without the century. (00..99)
-          May be overridden via the document’s <code>date</code> front matter.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>month</code></p>
-      </td>
-      <td>
-        <p>
-          Month from the post’s filename. (01..12)
-          May be overridden via the document’s <code>date</code> front matter.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>i_month</code></p>
-      </td>
-      <td>
-        <p>
-          Month without leading zeros from the post’s filename. May be
-          overridden via the document’s <code>date</code> front matter.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>short_month</code></p>
-      </td>
-      <td>
-        <p>Three-letter month abbreviation, e.g. “Jan”.</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>long_month</code></p>
-        <small>{% include docs_version_badge.html version="4.0" %}</small>
-      </td>
-      <td>
-        <p>Full month name, e.g. “January”.</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>day</code></p>
-      </td>
-      <td>
-        <p>
-          Day of the month from the post’s filename. (01..31)
-          May be overridden via the document’s <code>date</code> front matter.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>i_day</code></p>
-      </td>
-      <td>
-        <p>
-          Day of the month without leading zeros from the post’s filename.
-          May be overridden via the document’s <code>date</code> front matter.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>y_day</code></p>
-      </td>
-      <td>
-        <p>Ordinal day of the year from the post’s filename, with leading zeros. (001..366)</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>w_year</code></p>
-        <small>{% include docs_version_badge.html version="4.0" %}</small>
-      </td>
-      <td>
-        <p>Week year which may differ from the month year for up to three days at the start of January and end of December</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>week</code></p>
-        <small>{% include docs_version_badge.html version="4.0" %}</small>
-      </td>
-      <td>
-        <p>Week number of the current year, starting with the first week having a majority of its days in January. (01..53)</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>w_day</code></p>
-        <small>{% include docs_version_badge.html version="4.0" %}</small>
-      </td>
-      <td>
-        <p>Day of the week, starting with Monday. (1..7)</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>short_day</code></p>
-        <small>{% include docs_version_badge.html version="4.0" %}</small>
-      </td>
-      <td>
-        <p>Three-letter weekday abbreviation, e.g. “Sun”.</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>long_day</code></p>
-        <small>{% include docs_version_badge.html version="4.0" %}</small>
-      </td>
-      <td>
-        <p>Weekday name, e.g. “Sunday”.</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>hour</code></p>
-      </td>
-      <td>
-        <p>
-          Hour of the day, 24-hour clock, zero-padded from the post’s
-          <code>date</code> front matter. (00..23)
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>minute</code></p>
-      </td>
-      <td>
-        <p>
-          Minute of the hour from the post’s <code>date</code> front matter. (00..59)
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>second</code></p>
-      </td>
-      <td>
-        <p>
-          Second of the minute from the post’s <code>date</code> front matter. (00..59)
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>title</code></p>
-      </td>
-      <td>
-        <p>
-            Title from the document’s filename. May be overridden via
-            the document’s <code>slug</code> front matter. Preserves case from the source.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>slug</code></p>
-      </td>
-      <td>
-        <p>
-            Slugified title from the document’s filename (any character
-            except numbers and letters is replaced as hyphen). May be
-            overridden via the document’s <code>slug</code> front matter.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>categories</code></p>
-      </td>
-      <td>
-        <p>
-          The specified categories for this post. If a post has multiple
-          categories, Jekyll will create a hierarchy (e.g. <code>/category1/category2</code>).
-          Also Jekyll automatically parses out double slashes in the URLs,
-          so if no categories are present, it will ignore this.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>slugified_categories</code></p>
-        <small>{% include docs_version_badge.html version="4.1" %}</small>
-      </td>
-      <td>
-        <p>
-          The specified categories for this post but <em>slugified</em>. If a category is a
-          composite of multiple words, Jekyll will downcase all alphabets and replace any
-          non-alphanumeric character with a hyphen. (e.g. <code>"Work 2 Progress"</code>
-          will be converted into <code>"work-2-progress"</code>)
-        </p>
-        <p>
-          If a post has multiple categories, Jekyll will create a hierarchy
-          (e.g. <code>/work-2-progress/category2</code>).
-          Also Jekyll automatically parses out double slashes in the URLs,
-          so if no categories are present, it will ignore this.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>:output_ext</code></p>
-      </td>
-      <td>
-        <p>Extension of the output file. (Included by default and usually unnecessary.)</p>
+      <td><p><code>:{{ entry.name }}</code></p>
+        {%- if entry.intro_ver -%}
+          <small>{% include docs_version_badge.html version = entry.intro_ver %}</small>
+        {%- endif -%}
       </td>
+      <td><p>{{ entry.desc }}</p></td>
     </tr>
+    {%- endfor %}
   </tbody>
 </table>
 </div>
@@ -303,50 +82,22 @@ For posts, Jekyll also provides the following built-in styles for convenience:
     </tr>
   </thead>
   <tbody>
+    {%- for entry in site.data.permalinks.builtin_formats %}
     <tr>
-      <td>
-        <p><code>date</code></p>
+      <td><p><code>{{ entry.name }}</code></p>
+        {%- if entry.intro_ver -%}
+          <small>{% include docs_version_badge.html version = entry.intro_ver %}</small>
+        {%- endif -%}
       </td>
       <td>
-        <p><code>/:categories/:year/:month/:day/:title:output_ext</code></p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>pretty</code></p>
-      </td>
-      <td>
-        <p><code>/:categories/:year/:month/:day/:title/</code></p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>ordinal</code></p>
-      </td>
-      <td>
-        <p><code>/:categories/:year/:y_day/:title:output_ext</code></p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>weekdate</code></p>
-        <small>{% include docs_version_badge.html version="4.0" %}</small>
-      </td>
-      <td>
-        <p>
-          <code>/:categories/:year/W:week/:short_day/:title:output_ext</code><br/>
-          <small>(<code>W</code> will be prefixed to the value of <code>:week</code>)</small>
+        <p><code>{{ entry.format }}</code>
+        {%- if entry.note -%}<br/>
+          <small>({{ entry.note }})</small>
+        {%- endif -%}
         </p>
       </td>
     </tr>
-    <tr>
-      <td>
-        <p><code>none</code></p>
-      </td>
-      <td>
-        <p><code>/:categories/:title:output_ext</code></p>
-      </td>
-    </tr>
+    {%- endfor %}
   </tbody>
 </table>
 </div>
@@ -381,57 +132,12 @@ Collections have the following placeholders available:
     </tr>
   </thead>
   <tbody>
+    {%- for entry in site.data.permalinks.types.documents -%}
     <tr>
-      <td>
-        <p><code>:collection</code></p>
-      </td>
-      <td>
-        <p>Label of the containing collection.</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>:path</code></p>
-      </td>
-      <td>
-        <p>
-          Path to the document relative to the collection's directory,
-          including base filename of the document.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>:name</code></p>
-      </td>
-      <td>
-        <p>The document's base filename, with every sequence of spaces
-        and non-alphanumeric characters replaced by a hyphen.</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>:title</code></p>
-      </td>
-      <td>
-        <p>
-          The <code>:title</code> template variable will take the
-          <code>slug</code> <a href="/docs/front-matter/">front matter</a>
-          variable value if any is present in the document; if none is
-          defined then <code>:title</code> will be equivalent to
-          <code>:name</code>, aka the slug generated from the filename.
-          Preserves case from the source.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>:output_ext</code></p>
-      </td>
-      <td>
-        <p>Extension of the output file. (Included by default and usually unnecessary.)</p>
-      </td>
+      <td><p><code>:{{ entry.name }}</code></p></td>
+      <td><p>{{ entry.desc }}</p></td>
     </tr>
+    {%- endfor -%}
   </tbody>
 </table>
 </div>
@@ -453,36 +159,12 @@ Pages have the following placeholders available:
     </tr>
   </thead>
   <tbody>
+    {%- for entry in site.data.permalinks.types.pages -%}
     <tr>
-      <td>
-        <p><code>:path</code></p>
-      </td>
-      <td>
-        <p>
-          Path to the page relative to the site's source directory, excluding
-          base filename of the page.
-        </p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>:basename</code></p>
-      </td>
-      <td>
-        <p>The page's base filename</p>
-      </td>
-    </tr>
-    <tr>
-      <td>
-        <p><code>:output_ext</code></p>
-      </td>
-      <td>
-        <p>
-          Extension of the output file. (Included by default and usually
-          unnecessary.)
-        </p>
-      </td>
+      <td><p><code>:{{ entry.name }}</code></p></td>
+      <td><p>{{ entry.desc }}</p></td>
     </tr>
+    {%- endfor -%}
   </tbody>
 </table>
 </div>

docs/_docs/plugins/generators.md

@@ -87,6 +87,7 @@ module SamplePlugin
     # Placeholders that are used in constructing page URL.
     def url_placeholders
       {
+        :path       => @dir,
         :category   => @dir,
         :basename   => basename,
         :output_ext => output_ext,

docs/_docs/plugins/hooks.md

@@ -211,7 +211,7 @@ The complete list of available hooks:
         <p><code>:post_convert</code></p>
       </td>
       <td>
-        <p>After converting the post content, but before rendering the postlayout</p>
+        <p>After converting the post content, but before rendering the post layout</p>
       </td>
     </tr>
     <tr>

docs/_docs/plugins/installation.md

@@ -109,8 +109,10 @@ end
     <code>--safe</code> option to disable plugins (with the exception of some
     <a href="https://pages.github.com/versions">whitelisted plugins</a>) for security reasons. Unfortunately, this means your plugins won't
     work if you’re deploying via GitHub Pages.<br><br>
-    You can still use GitHub Pages to publish your site, but you’ll need to build the site locally and push the generated files to your
-    GitHub repository instead of the Jekyll source files.
+    You can still use GitHub Pages to publish your site, but you'll need to either build the site locally and push the generated files to
+    your GitHub repository or use
+    <a href="{{ '/docs/continuous-integration/github-actions/' | relative_url }}" title="GitHub Actions">GitHub Actions</a> to host source
+    files on GitHub yet build and deploy with full control on GitHub Pages.
   </p>
 </div>
 

docs/_docs/step-by-step/01-setup.md

@@ -3,6 +3,8 @@ layout: step
 title: Setup
 menu_name: Step by Step Tutorial
 position: 1
+redirect_from:
+- /docs/step-by-step/
 ---
 Welcome to Jekyll's step-by-step tutorial. This tutorial takes
 you from having some front-end web development experience to building your

docs/_docs/step-by-step/07-assets.md

@@ -17,20 +17,20 @@ Jekyll sites often use this structure to keep assets organized:
 ...
 ```
 So, from your assets folder, create folders called css, images and js.
-Additionally, directly under the root create another folder called '_sass', which you will need shortly.
+Additionally, directly under the root create another folder called `_sass`, which you will need shortly.
 
 ## Sass
 
 Inlining the styles used in `_includes/navigation.html`(adding or configuring within the same file) is not a best practice.
 Instead, let's style the current page by defining our first class in a new css file instead. 
 
-To do this, refer to the class (that you will configure in the next parts of this step) from within the navigation.html file by removing the code you added earlier (to color the current link red) and inserting the following code:
+To do this, refer to the class (that you will configure in the next parts of this step) from within the `navigation.html` file by removing the code you added earlier (to color the current link red) and inserting the following code:
 
 {% raw %}
 ```liquid
 <nav>
   {% for item in site.data.navigation %}
-    <a href="{{ item.link }}" {% if page.url == item.link %}class="current"{% endif %}>{{ item.name }}</a>
+    <a href="{{ item.link }}"{% if page.url == item.link %} class="current"{% endif %}>{{ item.name }}</a>
   {% endfor %}
 </nav>
 ```
@@ -50,7 +50,7 @@ First create a Sass file at `assets/css/styles.scss` with the following content:
 
 The empty front matter at the top tells Jekyll it needs to process the file. The
 `@import "main"` tells Sass to look for a file called `main.scss` in the sass
-directory (`_sass/`) by default which you already created directly under the root folder of your website).
+directory (`_sass/` by default) you already created at the root of your working directory earlier.
 
 At this stage you'll just have a main css file. For larger projects, this is a
 great way to keep your CSS organized.

docs/_docs/step-by-step/08-blogging.md

@@ -19,14 +19,15 @@ following content:
 layout: post
 author: jill
 ---
-A banana is an edible fruit – botanically a berry – produced by several kinds
-of large herbaceous flowering plants in the genus Musa.
+
+A banana is an edible fruit – botanically a berry – produced by several
+kinds of large herbaceous flowering plants in the genus Musa.
 
 In some countries, bananas used for cooking may be called "plantains",
-distinguishing them from dessert bananas. The fruit is variable in size, color,
-and firmness, but is usually elongated and curved, with soft flesh rich in
-starch covered with a rind, which may be green, yellow, red, purple, or brown
-when ripe.
+distinguishing them from dessert bananas. The fruit is variable in size,
+color, and firmness, but is usually elongated and curved, with soft
+flesh rich in starch covered with a rind, which may be green, yellow,
+red, purple, or brown when ripe.
 ```
 
 This is like the `about.md` you created before except it has an author and
@@ -115,11 +116,11 @@ author: jill
 ---
 An apple is a sweet, edible fruit produced by an apple tree.
 
-Apple trees are cultivated worldwide, and are the most widely grown species in
-the genus Malus. The tree originated in Central Asia, where its wild ancestor,
-Malus sieversii, is still found today. Apples have been grown for thousands of
-years in Asia and Europe, and were brought to North America by European
-colonists.
+Apple trees are cultivated worldwide, and are the most widely grown
+species in the genus Malus. The tree originated in Central Asia, where
+its wild ancestor, Malus sieversii, is still found today. Apples have
+been grown for thousands of years in Asia and Europe, and were brought
+to North America by European colonists.
 ```
 
 `_posts/2018-08-22-kiwifruit.md`:
@@ -129,14 +130,14 @@ colonists.
 layout: post
 author: ted
 ---
-Kiwifruit (often abbreviated as kiwi), or Chinese gooseberry is the edible
-berry of several species of woody vines in the genus Actinidia.
+Kiwifruit (often abbreviated as kiwi), or Chinese gooseberry is the
+edible berry of several species of woody vines in the genus Actinidia.
 
-The most common cultivar group of kiwifruit is oval, about the size of a large
-hen's egg (5–8 cm (2.0–3.1 in) in length and 4.5–5.5 cm (1.8–2.2 in) in
-diameter). It has a fibrous, dull greenish-brown skin and bright green or
-golden flesh with rows of tiny, black, edible seeds. The fruit has a soft
-texture, with a sweet and unique flavor.
+The most common cultivar group of kiwifruit is oval, about the size of
+a large hen's egg (5–8 cm (2.0–3.1 in) in length and 4.5–5.5 cm
+(1.8–2.2 in) in diameter). It has a fibrous, dull greenish-brown skin
+and bright green or golden flesh with rows of tiny, black, edible
+seeds. The fruit has a soft texture, with a sweet and unique flavor.
 ```
 
 Open <a href="http://localhost:4000" target="_blank" data-proofer-ignore>http://localhost:4000</a>

docs/_docs/step-by-step/09-collections.md

@@ -57,7 +57,7 @@ Ted has been eating fruit since he was baby.
 Let's add a page which lists all the authors on the site. Jekyll makes the
 collection available at `site.authors`.
 
-Create `staff.html` and iterate over `site.authors` to output all the staff:
+Create `staff.html` in the root directory and iterate over `site.authors` to output all the staff:
 
 {% raw %}
 ```liquid

docs/_docs/step-by-step/10-deployment.md

@@ -11,7 +11,7 @@ It's good practice to have a [Gemfile](/docs/ruby-101/#gemfile) for your site.
 This ensures the version of Jekyll and other gems remains consistent across
 different environments.
 
-Create a `Gemfile` in the root. 
+If you completed step one in this tutorial, you have already created a Gemfile. If you skipped step one, create a `Gemfile` in the root. 
 The file should be called 'Gemfile' and should *not* have any extension. 
 You can create a Gemfile with Bundler and then add the `jekyll` gem:
 
@@ -20,7 +20,7 @@ bundle init
 bundle add jekyll
 ```
 
-Your file should look something like:
+Your `Gemfile` should look something like:
 
 ```ruby
 # frozen_string_literal: true
@@ -42,10 +42,15 @@ bundle exec jekyll serve
 
 This restricts your Ruby environment to only use gems set in your `Gemfile`.
 
+Note: if publishing your site with GitHub Pages, you can match production
+version of Jekyll by using the `github-pages` gem instead of `jekyll`
+in your `Gemfile`. In this scenario you may also want to exclude `Gemfile.lock`
+from your repository because GitHub Pages ignores that file.
+
 ## Plugins
 
 Jekyll plugins allow you to create custom generated content specific to your
-site. There's many [plugins](/docs/plugins/) available or you can even
+site. There are many [plugins](/docs/plugins/) available or you can even
 write your own.
 
 There are three official plugins which are useful on almost any Jekyll site:
@@ -63,12 +68,12 @@ in a `jekyll_plugins` group they'll automatically be required into Jekyll:
 ```ruby
 source 'https://rubygems.org'
 
-gem 'jekyll'
+gem "jekyll"
 
 group :jekyll_plugins do
-  gem 'jekyll-sitemap'
-  gem 'jekyll-feed'
-  gem 'jekyll-seo-tag'
+  gem "jekyll-sitemap"
+  gem "jekyll-feed"
+  gem "jekyll-seo-tag"
 end
 ```
 

docs/_docs/themes.md

@@ -14,6 +14,7 @@ You can find and preview themes on different galleries:
 - [jekyllthemes.org](http://jekyllthemes.org/)
 - [jekyllthemes.io](https://jekyllthemes.io/)
 - [jekyll-themes.com](https://jekyll-themes.com/)
+- [jekyllup.com](https://jekyllup.com/)
 
 See also: [resources](/resources/).
 

docs/_docs/upgrading/2-to-3.md

@@ -89,11 +89,11 @@ then the layout can access that via {% raw %}`{{ layout.class }}`{% endraw %}.
 
 For the first time, the default syntax highlighter has changed for the
 `highlight` tag and for backtick code blocks. Instead of [Pygments.rb](https://github.com/tmm1/pygments.rb),
-it's now [Rouge](http://rouge.jneen.net/). If you were using the `highlight` tag with certain
+it's now [Rouge](https://github.com/rouge-ruby/rouge). If you were using the `highlight` tag with certain
 options, such as `hl_lines`, they may not be available when using Rouge. To
 go back to using Pygments, set `highlighter: pygments` in your
 `_config.yml` file and run `gem install pygments.rb` or add
-`gem 'pygments.rb'` to your project's `Gemfile`.
+`gem "pygments.rb"` to your project's `Gemfile`.
 
 ### Relative Permalink support removed
 

docs/_docs/upgrading/3-to-4.md

@@ -123,7 +123,7 @@ Jekyll has dropped support for `kramdown-1.x` entirely.
 
 From [`v2.0` onwards](https://kramdown.gettalong.org/news.html#kramdown-200-released)
 kramdown requires specific extensions to be additionally installed to use
-certain features are desired outside of kramdown's core functionality.
+certain desired features outside of kramdown's core functionality.
 
 Out of all the extensions listed in the report linked above, gem
 `kramdown-parser-gfm` is automatically installed along with Jekyll 4.0. The

docs/_docs/variables.md

@@ -34,6 +34,10 @@ The following is a reference of the available data.
   </p>
 </div>
 
+## Jekyll Variables
+
+{% include docs_variables_table.html scope=site.data.jekyll_variables.jekyll %}
+
 ## Theme Variables {%- include docs_version_badge.html version="4.3.0" -%}
 {: #theme-variables }
 

docs/_includes/anchor_links.html

@@ -1,33 +1,33 @@
 <script>
-  var anchorForId = function (id) {
-    var anchor = document.createElement("a");
-    anchor.className = "header-link";
-    anchor.href      = "#" + id;
-    anchor.innerHTML = "<span class=\"sr-only\">Permalink</span><i class=\"fa fa-link\"></i>";
-    anchor.title = "Permalink";
-    return anchor;
-  };
+/* Creates an anchor element with the given ID and link for the permalink*/
+const anchorForId = (id) => {
+  const anchor = document.createElement("a");
+  anchor.className = "header-link";
+  anchor.href = `#${id}`;
+  anchor.innerHTML = `<span class="sr-only">Permalink</span><i class="fa fa-link" aria-hidden="true"></i>`;
+  anchor.title = "Permalink";
+  return anchor;
+};
 
-  var linkifyAnchors = function (level, containingElement) {
-    var headers = containingElement.getElementsByTagName("h" + level);
-    for (var h = 0; h < headers.length; h++) {
-      var header = headers[h];
-
-      if (typeof header.id !== "undefined" && header.id !== "") {
-        header.appendChild(anchorForId(header.id));
-      }
+/* Finds all headers of the specified level within the given element, and adds a permalink to each header*/
+const linkifyAnchors = (level, containingElement) => {
+  const headers = Array.from(containingElement.getElementsByTagName(`h${level}`));
+  headers.forEach((header) => {
+    if (header.id) {
+      header.appendChild(anchorForId(header.id));
     }
-  };
+  });
+};
 
-  document.onreadystatechange = function () {
-    if (this.readyState === "complete") {
-      var contentBlock = document.getElementsByClassName("docs")[0] || document.getElementsByClassName("news")[0];
-      if (!contentBlock) {
-        return;
-      }
-      for (var level = 1; level <= 6; level++) {
-        linkifyAnchors(level, contentBlock);
-      }
+/* Executes the function when the document is ready */
+document.onreadystatechange = () => {
+  if (document.readyState === "complete") {
+    const contentBlock = document.getElementsByClassName("docs")[0]
+      ?? document.getElementsByClassName("news")[0];
+    if (!contentBlock) { return; }
+    for (let level = 1; level <= 6; level++) {
+      linkifyAnchors(level, contentBlock);
     }
-  };
+  }
+};
 </script>

docs/_includes/docs_contents.html

@@ -1,14 +1,17 @@
 <div class="unit one-fifth hide-on-mobiles">
   <aside>
-    {% for section in site.data.docs_nav -%}
+    {% for section in site.data.docs_nav %}
       <h4>{{ section.title }}</h4>
       <ul>
-      {%- for item in section.docs -%}
-        {%- assign p = site.docs | where: "url", item.link | first %}
-        <li {%- if page.url == p.url %} class="current" {%- endif -%}><a href="{{ p.url | relative_url }}">
-          {{- p.menu_name | default: p.title -}}
-        </a></li>
-      {%- endfor %}
+        {%- for item in section.docs -%}
+          {%- assign item_page = site.docs | where: "url", item.link | first -%}
+          {%- capture item_html -%}
+            <a href="{{ item_page.url | relative_url }}">
+              {{ item_page.menu_name | default: item_page.title }}
+            </a>
+          {% endcapture %}
+          <li{% unless item_page.url != page.url %} class="current"{% endunless %}>{{ item_html }}</li>
+        {% endfor %}
       </ul>
     {% endfor -%}
   </aside>

docs/_includes/docs_contents_mobile.html

@@ -1,15 +1,15 @@
 <div class="docs-nav-mobile unit whole show-on-mobiles">
-  <select onchange="if (this.value) window.location.href=this.value">
+  <select id="doc-nav" onchange="navigateToUrl(this)" aria-label="Select a page from the documentation">
     <option value="">Navigate the docs…</option>
-    {% for section in site.data.docs_nav -%}
-    <optgroup label="{{ section.title }}">
-    {%- for item in section.docs -%}
-      {% assign p = site.docs | where: "url", item.link | first %}
-      <option value="{{ p.url | relative_url }}">
-        {{- p.menu_name | default: p.title -}}
-      </option>
-    {%- endfor %}
-    </optgroup>
-    {% endfor -%}
+    {% for section in site.data.docs_nav %}
+      <optgroup label="{{ section.title }}">
+        {%- for item in section.docs -%}
+          {% assign item_page = site.docs | where: "url", item.link | first %}
+          <option value="{{ item_page.url | relative_url }}">
+            {{- item_page.menu_name | default: item_page.title -}}
+          </option>
+        {%- endfor %}
+      </optgroup>
+    {% endfor %}
   </select>
 </div>

docs/_includes/footer.html

@@ -1,23 +1,18 @@
 <footer>
   <div class="grid">
-    <div class="unit one-third center-on-mobiles">
+    <div class="unit two-thirds center-on-mobiles">
       <p>Jekyll is lovingly maintained by the <a href="{{ '/team/' | relative_url }}">core team</a> of volunteers. </p>
-      <p>The contents of this website are <br />&copy;&nbsp;{{ site.time | date: '%Y' }} under the terms of the <a href="{{ site.repository }}/blob/master/LICENSE">MIT&nbsp;License</a>.</p>
+      <p>The contents of this website are <br />&copy;&nbsp;{{ site.time | date: '%Y' }} under the terms of the <a href="{{ site.repository }}/blob/master/LICENSE">MIT License</a>.</p>
     </div>
-    <div class="unit two-thirds align-right center-on-mobiles">
+    <div class="unit one-third align-right center-on-mobiles">
       <p>
         Proudly hosted by
         <a href="https://github.com">
           <img src="{{ 'img/footer-logo.png' | relative_url }}" width="100" height="30" alt="GitHub • Social coding">
         </a>
       </p>
-    </div>
-    <div class="unit two-thirds align-right center-on-mobiles">
       <p>
-        Jekyll is funded thanks to its
-        <a href="https://github.com/jekyll/jekyll#sponsors">
-          sponsors!
-        </a>
+        Jekyll is funded thanks to its <a href="https://github.com/jekyll/jekyll#sponsors">sponsors!</a>
       </p>
     </div>
   </div>

docs/_includes/improve_doc_link.html

@@ -0,0 +1,5 @@
+<div class="improve right hide-on-mobiles">
+  <a data-proofer-ignore href="{{ site.repository }}/edit/{{ site.site_branch }}/docs/{{ page.path }}">
+    <i class="fa fa-pencil"></i> &nbsp;Improve this page
+  </a>
+</div>

docs/_includes/mobile-nav-items.html

@@ -3,12 +3,12 @@
     {% if p.show_on_mobile -%}
     <li
       {%- if p.link == '/' -%}
-        {%- if page.url == '/' %} class="current" {% endif -%}
+        {%- if page.url == '/' %} class="current" aria-current="page" {% endif -%}
       {% else -%}
-        {%- if page.url contains p.link %} class="current" {% endif -%}
+        {%- if page.url contains p.link %} class="current" aria-current="page" {% endif -%}
       {% endif -%}
     ><a href="{{ p.link | relative_url }}">{{ p.title }}</a></li>
     {% endif -%}
   {% endfor -%}
-  <li><a href="{{ site.repository }}">GitHub</a></li>
-</ul>
+  <li><a href="{{ site.repository }}" target="_blank" rel="noopener">GitHub</a></li>
+</ul>

docs/_includes/news_contents.html

@@ -1,10 +1,10 @@
 <div class="unit one-fifth hide-on-mobiles">
   <aside>
     <ul>
-      <li {%- if page.title == 'News' %} class="current" {%- endif %}>
+      <li {% if page.title == 'News' %} class="current" {% endif %}>
         <a href="{{ '/news/' | relative_url }}">All News</a>
       </li>
-      <li {%- if page.title == 'Releases' %} class="current" {%- endif %}>
+      <li {% if page.title == 'Releases' %} class="current" {% endif %}>
         <a href="{{ '/news/releases/' | relative_url }}">Jekyll Releases</a>
       </li>
     </ul>
@@ -23,7 +23,7 @@
     <ul>
     {% for post in site.posts -%}
       {% unless post.categories contains 'release' -%}
-      <li {%- if page.title == post.title %} class="current" {%- endif %}>
+      <li {% if page.title == post.title %} class="current" {% endif %}>
         <a href="{{ post.url | relative_url }}">{{ post.title }}</a>
       </li>
       {% endunless -%}

docs/_includes/news_contents_mobile.html

@@ -1,5 +1,5 @@
 <div class="docs-nav-mobile unit whole show-on-mobiles">
-  <select onchange="if (this.value) window.location.href=this.value">
+  <select id="news-nav" onchange="navigateToUrl(this)" aria-label="Select a post from the blog">
     <option value="">Navigate the blog…</option>
     <option value="{{ '/news/' | relative_url }}">Home</option>
     <optgroup label="posts">
@@ -8,4 +8,4 @@
       {% endfor -%}
     </optgroup>
   </select>
-</div>
+</div>

docs/_includes/news_item.html

@@ -1,5 +1,5 @@
-<article>
-  <h2>
+<article itemscope itemtype="http://schema.org/NewsArticle">
+  <h2 itemprop="headline">
     <a href="{{ post.url | relative_url }}">
       {{- post.title -}}
     </a>
@@ -10,16 +10,16 @@
     </span>
   </span>
   <div class="post-meta">
-    <span class="post-date">
+    <span class="post-date" itemprop="datePublished" content="{{ post.date | date: "%Y-%m-%d" }}">
       {{- post.date | date_to_string -}}
     </span>
     {% assign author = post.author -%}
-    <a href="https://github.com/{{ author }}" class="post-author">
+    <a class="post-author" itemprop="author" itemscope itemtype="http://schema.org/Person" target="_blank" href="https://github.com/{{ author }}">
       {% avatar user=author size=24 -%}
-      <span class="author-name">{{ author }}</span>
+      <span class="author-name" itemprop="name">{{ author }}</span>
     </a>
   </div>
-  <div class="post-content">
+  <div class="post-content" itemprop="articleBody">
     {{- post.content -}}
   </div>
 </article>

docs/_includes/news_item_archive.html

@@ -1,4 +1,4 @@
-<article>
+<article itemscope itemtype="http://schema.org/Article">
   <div class="cell-left">
     <span class="post-category">
       <span class="label">
@@ -8,18 +8,18 @@
   </div>
   <div class="cell-right">
     <div class="post-meta">
-      <h2 class="post-title">
-        <a href="{{ post.url | relative_url }}">
+      <h2 class="post-title" itemprop="headline">
+        <a href="{{ post.url | relative_url }}" itemprop="url">
           {{- post.title -}}
         </a>
       </h2>
-      <span class="post-date">
+      <span class="post-date" itemprop="datePublished" content="{{ post.date | date: '%Y-%m-%d' }}">
         {{- post.date | date_to_string -}}
       </span>
       {% assign author = post.author -%}
-      <a href="https://github.com/{{ author }}" class="post-author">
+      <a href="https://github.com/{{ author }}" class="post-author" itemprop="author" itemscope itemtype="http://schema.org/Person">
         {% avatar user=author size=24 -%}
-        <span class="author-name">{{ author }}</span>
+        <span class="author-name" itemprop="name">{{ author }}</span>
       </a>
     </div>
   </div>

docs/_includes/search/input.html

@@ -1 +1 @@
-<input type="text" id="docsearch-input" placeholder="Search the docs…">
+<input type="text" id="docsearch-input" placeholder="Search the docs…" aria-label="Search">

docs/_includes/top.html

@@ -1,5 +1,5 @@
-<!DOCTYPE HTML>
-<html lang="en-US">
+<!DOCTYPE html>
+<html lang="en">
 <head>
   <meta charset="UTF-8">
   <meta name="viewport" content="width=device-width,initial-scale=1">

docs/_includes/tutorials_contents_mobile.html

@@ -1,14 +1,14 @@
 <div class="docs-nav-mobile unit whole show-on-mobiles">
-  <select onchange="if (this.value) window.location.href=this.value">
+  <select id="tutorial-nav" onchange="navigateToUrl(this)" aria-label="Select a tutorial">
     <option value="">Navigate the tutorials…</option>
     {% for section in site.data.tutorials -%}
-    <optgroup label="{{ section.title }}">
-      {% for item in section.tutorials -%}
-        {% assign item_url = item | prepend:"/tutorials/" | append:"/" -%}
-        {% assign tutorial = site.tutorials | where: "url", item_url | first -%}
-        <option value="{{ tutorial.url | relative_url }}">{{ tutorial.title }}</option>
-      {% endfor -%}
-    </optgroup>
+      <optgroup label="{{ section.title }}">
+        {% for item in section.tutorials -%}
+          {% assign item_url = item | prepend:"/tutorials/" | append:"/" -%}
+          {% assign tutorial = site.tutorials | where: "url", item_url | first -%}
+          <option value="{{ tutorial.url | relative_url }}">{{ tutorial.title }}</option>
+        {% endfor -%}
+      </optgroup>
     {% endfor -%}
   </select>
-</div>
+</div>

docs/_layouts/default.html

@@ -9,5 +9,16 @@
   {%- include anchor_links.html -%}
   {%- include analytics.html -%}
   {%- include search/script.html -%}
+  
+  <script>
+  {%- comment -%}
+  // This function is called when the user selects an option from a <select> element.
+  // If the selected option has a valid URL, it changes the window location to that URL.
+  {%- endcomment %}
+  const navigateToUrl = (select) => {
+    const url = select.value;
+    url && (window.location.href = url);
+  };
+  </script>
 </body>
 </html>

docs/_layouts/docs.html

@@ -7,10 +7,7 @@ layout: default
     {% include docs_contents_mobile.html -%}
     <div class="unit four-fifths">
       <article>
-        <div class="improve right hide-on-mobiles">
-          <a data-proofer-ignore href="https://github.com/jekyll/jekyll/edit/master/docs/{{ page.path }}"><i
-             class="fa fa-pencil"></i> &nbsp;Improve this page</a>
-        </div>
+        {% include improve_doc_link.html %}
         <h1>{{ page.title }}</h1>
         {{ content }}
       </article>

docs/_layouts/news_item.html

@@ -2,8 +2,8 @@
 layout: news
 ---
 
-<article>
-  <h2>
+<article itemscope itemtype="http://schema.org/Article">
+  <h2 itemprop="headline">
     {{ page.title }}
     <a href="{{ page.url | relative_url }}" class="header-link" title="Permalink">
       <span class="sr-only">Permalink</span>
@@ -16,16 +16,16 @@ layout: news
     </span>
   </span>
   <div class="post-meta">
-    <span class="post-date">
+    <span class="post-date" itemprop="datePublished" content="{{ page.date | date: "%Y-%m-%d" }}">
       {{- page.date | date_to_string -}}
     </span>
     {% assign author = page.author -%}
-    <a href="https://github.com/{{ author }}" class="post-author">
+    <a class="post-author" itemprop="author" itemscope itemtype="http://schema.org/Person" target="_blank" href="https://github.com/{{ author }}">
       {% avatar user=author size=24 -%}
-      <span class="author-name">{{ author }}</span>
+      <span class="author-name" itemprop="name">{{ author }}</span>
     </a>
   </div>
-  <div class="post-content">
+  <div class="post-content" itemprop="articleBody">
     {{ content }}
   </div>
 </article>

docs/_layouts/page.html

@@ -7,9 +7,7 @@ layout: default
     <div class="unit whole">
       <article>
         {%- if page.permalink contains "resources" %}
-        <div class="improve right hide-on-mobiles">
-          <a data-proofer-ignore href="https://github.com/jekyll/jekyll/edit/master/docs/{{ page.path }}"><i class="fa fa-pencil"></i> &nbsp;Improve this page</a>
-        </div>
+        {% include improve_doc_link.html %}
         {% endif -%}
         <h1>{{ page.title }}</h1>
         {{ content }}

docs/_layouts/step.html

@@ -6,9 +6,7 @@ layout: default
     {% include docs_contents_mobile.html -%}
     <div class="unit four-fifths">
       <article>
-        <div class="improve right hide-on-mobiles">
-          <a data-proofer-ignore href="https://github.com/jekyll/jekyll/edit/master/docs/{{ page.path }}"><i class="fa fa-pencil"></i> &nbsp;Improve this page</a>
-        </div>
+        {% include improve_doc_link.html %}
         <h1>Step by Step Tutorial</h1>
         <h2>{{ page.position }}. {{ page.title }}</h2>
         {{ content }}

docs/_layouts/tutorials.html

@@ -8,10 +8,7 @@ layout: default
     <div class="unit four-fifths">
       <article>
         <header class="tutorial-header">
-          <div class="improve right hide-on-mobiles">
-            <a href="https://github.com/jekyll/jekyll/edit/master/docs/{{ page.path }}"><i
-               class="fa fa-pencil"></i> &nbsp;Improve this page</a>
-          </div>
+          {% include improve_doc_link.html %}
           <h1 class="tutorial-title">{{ page.title }}</h1>
           {% assign author = page.author %}
           {% if author %}

docs/_posts/2019-08-19-jekyll-4-0-0-released.markdown

@@ -82,7 +82,7 @@ First, read the [upgrade guide](/docs/upgrading/3-to-4/)!
 Next, Edit your project's `Gemfile` to test Jekyll v4.x:
 
 ```ruby
-gem "jekyll", "~> 4.0"
+gem 'jekyll', '~> 4.0'
 ```
 
 Then run `bundle update` to update all dependencies. Unless you're using

docs/_posts/2022-12-21-jekyll-sass-converter-3.0-released.markdown

@@ -0,0 +1,71 @@
+---
+title: Jekyll Sass Converter 3.0 Released
+date: 2022-12-21 17:52:15 +0530
+author: ashmaroli
+category: community
+---
+
+Jekyll Sass Converter 3.0 shipped recently and is available to those using Jekyll 4.3 and above. This release contains major changes.
+Specifically, the plugin has **stopped using `sassc` for converting your Sass partials and stylesheets** into CSS files.
+Instead, the converter now uses the `sass-embedded` gem acting as an interface to Dart Sass, which is the current primary
+implementation of Sass under active development. The secondary implementation `libsass` which the `sassc` gem interfaced
+with has been deprecated by its developers.
+
+However, Dart Sass isn't *fully compatible* with older Ruby Sass workflow.
+
+## Requirements
+
+- Minimum Ruby Version: `Ruby 2.6.0` (all platforms).
+- Minimum Rubygems Version: `3.3.22` (for Linux-based platforms).
+
+## Migration Guide
+
+### Dropped `implmentation` Option
+
+In `v3.0.x`, `sass-embedded` is the only supported Sass implmentation, and therefore the config option
+`sass.implementation` introduced in `v2.2.0` has been removed.
+
+
+### Dropped `add_charset` Option
+
+The converter will no longer emit `@charset "UTF-8";` or a `U+FEFF` (byte-order marker) for `sassify` and `scssify`
+Jekyll filters and hence the redundant option `sass.add_charset` is no longer active.
+
+
+### Dropped `line_comments` Option
+
+`sass-embedded` does not support `sass.line_comments` option.
+
+
+### Dropped support of importing files with non-standard extension names
+
+`sass-embedded` only allows importing files that have extension names of `.sass`, `.scss` or `.css`. SCSS syntax in
+files with `.css` extension name will result in a syntax error.
+
+
+### Dropped support of importing files relative to site source
+
+In `v2.x`, the Converter allowed imports using paths relative to site source directory, even if the site source
+directory is not present in Sass' `load_paths` option. This is a side effect of a bug in the converter, which will remain as is in
+`v2.x` due to its usage in the wild.
+
+In `v3.x`, imports using paths relative to site source directory will not work out of box. To allow these imports, `.`
+(meaning current directory, or site source directory) need to be explicitly listed under `load_paths` option.
+
+
+### Dropped support of importing files with the same filename as their parent file
+
+In `v2.x`, the Converter allowed imports of files with the same filename as their parent file from `sass_dir` or
+`load_paths`. This is a side effect of a bug in the Converter, which will remain as is in `v2.x` due to its usage in the
+wild.
+
+In `v3.x`, imports using the same filename of parent file will create a circular import. To fix such imports, rename
+either of the files, or use complete relative path from the parent file.
+
+
+### Behavioral Differences in Sass Implementation
+
+There are a few intentional behavioral differences between Dart Sass and Ruby Sass. Please refer
+[Behavioral Differences from Ruby Sass][behavioral-differences] for details.
+
+[behavioral-differences]: https://github.com/sass/dart-sass#behavioral-differences-from-ruby-sass

docs/_posts/2023-01-20-jekyll-4-3-2-released.markdown

@@ -0,0 +1,27 @@
+---
+title: 'Jekyll 4.3.2 Released'
+date: 2023-01-20 23:00:00 +0530
+author: ashmaroli
+version: 4.3.2
+category: release
+---
+
+Hello Jekyllers!
+
+This is a small release containing fixes for some issues that came to our attention after the
+release of v4.3.1:
+  - Our `link` tag had a significant performance regression with the release of v4.3.0 solely due
+    to a change related to `Jekyll::Site#each_site_file`. The new patch restores previous performance
+    while maintaining the enhancements introduced in v4.3.0.
+  - The tables printed out on running a build with the `--profile` did not stop including the
+    misleading `TOTALS` row as advertised in the release-notes for v4.3.0. The row has been removed
+    completely now.
+  - `jekyll-sass-converter-3.0.0` that shipped in the interim was not happy with our blank-site
+    scaffolding (from running `jekyll new <path> --blank`) having a `main.scss` stylesheet template
+    *import* a Sass partial *also named* `main.scss`. So the partial has been renamed to `base.scss`.
+
+That's about it for this release. Depending on whether you use the features patched in this release,
+you may either wait for v4.4.0 (releasing in the near future) to update your Gemfile or, download
+the latest release right away! :)
+
+Happy Jekyllin'!!

docs/_posts/2023-01-29-jekyll-3-9-3-released.markdown

@@ -0,0 +1,15 @@
+---
+title: 'Jekyll 3.9.3 Released'
+date: 2023-01-29 18:30:22 2023 -0800
+author: parkr
+version: 3.9.3
+categories: [release]
+---
+
+Jekyll 3.9.3 is a bug fix release loosening version restrictions for
+dependencies `i18n` and `tzinfo` gems. You can now use Jekyll v3.9 with
+newer versions of these gems!
+
+More details in [the full release notes]({% link _docs/history.md %}#v3-9-3).
+
+Happy Jekylling!

docs/_posts/2023-12-27-jekyll-4-3-3-released.markdown

@@ -0,0 +1,19 @@
+---
+title: 'Jekyll 4.3.3 Released'
+date: 2023-12-27 11:15:00 -0600
+author: mattr-
+version: 4.3.3
+category: release
+---
+
+Hello Jekyllers!
+
+This is a very small release containing two things:
+
+ - A fix for using Jekyll with Ruby 3.3 and the new `logger` gem included with that release.
+ - A test fix for newer versions of Ruby for packagers that run the test suite
+ as part of their packaging process.
+
+Nothing new in the way of features for this release. You'll need to wait for v4.4 for that. 😄
+
+Happy Jekylling!!

docs/_posts/2023-12-28-jekyll-3-9-4-released.markdown

@@ -0,0 +1,14 @@
+---
+title: 'Jekyll 3.9.4 Released'
+date: 2023-12-28 14:45:05 -0800
+author: parkr
+version: 3.9.4
+categories: [release]
+---
+
+Hey Jekyllers!
+
+This release, 3.9.4, is to bring Ruby 3.3 support to Jekyll. You can find
+the details in [the changelog]({% link _docs/history.md %}#v3-9-4).
+
+Happy Jekylling!

docs/_posts/2024-06-23-jekyll-3-10-0-released.markdown

@@ -0,0 +1,16 @@
+---
+title: 'Jekyll 3.10.0 Released'
+date: 2024-06-23 21:56:58 -0700
+author: parkr
+version: 3.10.0
+categories: [release]
+---
+
+As Ruby continues to march on, the maintainers have made the decision to
+drop some previously-bundled gems. This release makes Jekyll depend
+directly on those gems so that whether your Ruby installation has them
+bundled or not, your experience can continue uninterrupted.
+
+More details [are in the changelog]({% link _docs/history.md %}#v3-10-0).
+
+Happy Jekylling!

docs/_posts/2024-09-16-jekyll-4-3-4-released.markdown

@@ -0,0 +1,18 @@
+---
+title: 'Jekyll 4.3.4 Released'
+date: 2024-09-16 21:34:22 +0530
+author: ashmaroli
+version: 4.3.4
+category: release
+---
+
+Hello Jekyllers!
+
+Publishing a small bug-fix release with the following patches:
+
+* Relax version-constraint on gem `wdm` in Gemfile created by `jekyll new`.
+* Patch `Jekyll::Drops::ThemeDrop#root` to render absolute path to theme-gem only if `JEKYLL_ENV` is explicitly set
+  to string `development`.
+
+That is all for now.
+Happy Jekyllin'!!

docs/_posts/2025-01-27-jekyll-4-4-0-released.markdown

@@ -0,0 +1,39 @@
+---
+title: 'Jekyll 4.4.0 Released'
+date: 2025-01-27 20:45:32 +0530
+author: ashmaroli
+version: 4.4.0
+category: release
+---
+
+Greetings Jekyllers, Jekyll v4.4.0 has been published!
+
+This release comes with the following notable changes since v4.3.x:
+
+* Liquid tag `highlight` now allows marking specific lines in the code-block.
+* Allow customizing the port that the vendored livereload script listens to, either via command-line flag
+  `--livereload-port NUM` or via setting desired value to key `livereload_port` in configuration file.
+* Acknowledge paths passed to CLI flag `--livereload-ignore` or list of paths defined under configuration key
+  `livereload_ignore` in order prevent automatic browser-refreshes on change to those paths.
+* Support for Ruby versions older than Ruby 2.7.0 has been dropped. Regardless, we recommend using Ruby 3.2.0 or newer
+  to reduce inconveniences with installing newer versions of various plugins for Jekyll.
+* In order to improve the out-of-the-box experience with newer versions of Ruby, we have added gems `base64`, `csv` as
+  runtime-dependencies. Consequently, those gems will be automatically installed with Jekyll and made available for use
+  on issuing `bundle exec jekyll <command>`. *Users on older versions of Jekyll will have to manually add the gems to
+  their Gemfile to resolve dependency errors*.
+* Gem `json` has been added as a runtime-dependency as well to provide consistent behavior across different platforms and
+  different Ruby versions.
+* Version constraint on `mercenary` gem has been relaxed to automatically allow future releases.
+
+Special thanks to my co-maintainers and members from our community who were instrumental in improving Jekyll codebase,
+documentation and development workflow since the release of v4.3:
+
+Akira Taguchi, Andy Coates, Daniel Haim, David Silveira, Gabriel B. Nunes, Gaelan Lloyd, Gourav Khunger, IFcoltransG,
+James Hoctor, Joe Mahoney, Joel Coffman, Jonas Jared Jacek, Jorge, Josh Soref, José Romero, Juan Vásquez, KenHV, Khalila,
+Koichi ITO, Krisztian Zsolt Sallai, Maciek Palmowski, Mamoru TASAKA, Matt Rogers, Michael Nordmeyer, Mike Slinn,
+Moncef Belyamani, Muhab Abdelreheem, Olle Jonsson, Olly Headey, Otto Liljalaakso, Parker Moore, QuinnG8, Ram Vasuthevan,
+Robert Austin, Robert Love, Sean M. Collins, Seth Falco, Seth Louis, Shruti Dalvi, Silent, Simon Wagar, Sutou Kouhei,
+Tomáš Hübelbauer, Valeriy Van, Virgil Ierubino, Vít Ondruch, William Entriken, William Underwood, a story, halorrr,
+iulianOnofrei (U-lee-aan), masaki, naoki kodama, nisbet-hubbard, plgagne, velle, waqarnazir, なつき and 林博仁 Buo-ren Lin
+
+Happy Jekyllin'!!

docs/_posts/2025-01-29-jekyll-4-4-1-released.markdown

@@ -0,0 +1,10 @@
+---
+title: 'Jekyll 4.4.1 Released'
+date: 2025-01-29 18:15:32 +0530
+author: ashmaroli
+version: 4.4.1
+category: release
+---
+
+Publishing a patch release to restore existing behavior around defining front matter defaults
+where a scope with path containing glob patterns are lax in matching paths on disk.

docs/_sass/_style.scss

@@ -212,40 +212,38 @@ h6:hover .header-link {
 /* Footer */
 
 footer {
-  background-color: #212121;
-  font-size: 16px;
-  padding-bottom: 5px;
-  color: #c0c0c0;
   margin-top: 40px;
+  padding-bottom: 5px;
+  font-size: 15px;
+  font-weight: 400;
+  color: #999999;
+  background-color: #212121;
 
   a {
-    color: #fff;
+    color: #dddddd;
 
     &:hover {
-
       img { opacity: 1; }
     }
   }
 
-  .align-right {
-
-    p { display: inline-block; }
-  }
+  p { margin-block: 12px }
 
   img {
     display: inline-block;
-    vertical-align: middle;
-    margin-left: 5px;
-    opacity: .8;
+    width: 84px;
+    height: auto;
+    margin-left: 2px;
     padding: 1px;
-    @include transition(opacity .2s);
+    vertical-align: bottom;
+    opacity: 0.5;
+    @include transition(opacity 0.2s);
   }
 }
 
 @media (max-width: 568px) {
   footer {
-    .one-third p { margin-bottom: 0; }
-    .two-thirds p { margin-top: -20px; }
+    p { margin-block: 6px }
   }
 }
 
@@ -444,7 +442,9 @@ article {
 }
 
 @media (max-width: 480px) {
-  article ul { padding-left: 20px; }
+  article {
+    ul, ol { padding-left: 20px }
+  }
 }
 
 @media (max-width: 568px) {

docs/_tutorials/convert-site-to-jekyll.md

@@ -426,7 +426,7 @@ layout: null
 ---
 
 <?xml version="1.0" encoding="UTF-8" ?>
-<rss version="2.0">
+<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
 
     <channel>
         <title>{{ site.title }}</title>

docs/_tutorials/navigation.md

@@ -637,11 +637,11 @@ First, we'll create an include that we can use for rendering the navigation tree
 ```liquid
 <ul>
   {% for item in include.nav %}
-    <li><a href="{{ item.url }}">{{ item.title }}</a></li>
-
-    {% if item.subnav %}
-      {% include nav.html nav=item.subnav %}
-    {% endif %}
+    <li><a href="{{ item.url }}">{{ item.title }}</a>
+      {% if item.subnav %}
+        {% include nav.html nav=item.subnav %}
+      {% endif %}
+    </li>
   {% endfor %}
 </ul>
 ```

docs/latest_version.txt

@@ -1 +1 @@
-4.3.1
+4.4.1

docs/pages/resources.md

@@ -14,6 +14,7 @@ some of the most popular Jekyll resources.
 - [jamstackthemes.dev](https://jamstackthemes.dev/ssg/jekyll/)
 - [jekyllthemes.org](http://jekyllthemes.org/)
 - [jekyllthemes.io](https://jekyllthemes.io/)
+- [builtatlightspeed.com](https://builtatlightspeed.com/category/jekyll)
 
 See also: [docs/themes](/docs/themes/).
 
@@ -36,15 +37,16 @@ Use a SaaS service as a backend for functionality on your Jekyll site
 
 ### Comments
   - [Staticman](https://staticman.net): Add user-generated content to a Jekyll site (free and open source)
-  - [Talkyard](https://www.talkyard.io/blog-comments): Embedded comments for Jekyll and others (free and open source, or hosted serverless)
+  - [Talkyard](https://blog-comments.talkyard.io/): Embedded comments for Jekyll and others (free and open source, or hosted serverless)
 
 ### Content Management
   - [CloudCannon](https://cloudcannon.com/): The Cloud CMS for Jekyll
   - [Contentful](https://github.com/contentful/jekyll-contentful-data-import): Content infrastructure for digital teams
-  - [Forestry.io](https://forestry.io/): A free Git-based responsive CMS, with content modeling and instant previews.
-  - [Netlify CMS](https://www.netlifycms.org/): Open source content management for your Git workflow
+  - [TinaCMS.io](https://tina.io/): Tina is an open-source, Git-backed headless content management system (CMS) that empowers both developers and content creators to collaborate seamlessly on a single platform
+  - [Decap CMS](https://decapcms.org/): Decap CMS (formerly Netlify CMS) is an open source content management system for your Git workflow that enables you to provide editors with a friendly UI and intuitive workflows
+  - [GitCMS](https://gitcms.dev/): Built for markdown-first content sites with a friendly Notion-like interface, a structured editorial publishing workflow, and MCP support which turns ChatGPT/Claude into content agent.
   - [Siteleaf](https://www.siteleaf.com/): Built for developers, Loved by everyone
-  - [Kentico Kontent](https://github.com/Kentico/kontent-jekyll): A headless CMS with full control over content presentation
+  - [Kentico Kontent](https://rubygems.org/gems/kontent-jekyll/): A headless CMS with full control over content presentation
 
 ### E-commerce
   - [MemberSpace](https://www.memberspace.com/integrations/jekyll-membership/): Add memberships and paywall functionality to a Jekyll site
@@ -61,6 +63,7 @@ Use a SaaS service as a backend for functionality on your Jekyll site
   - [Formspark](https://formspark.io/)
   - [Formspree (open source)](https://formspree.io/)
   - [formX](https://formx.stream)
+  - [Form.taxi](https://form.taxi/en/backend)
   - [Simple Form](https://getsimpleform.com/)
   - [SmartForms](https://smartforms.dev/)
   - [Typeform](https://www.typeform.com/templates/c/forms/)
@@ -88,7 +91,7 @@ Use a SaaS service as a backend for functionality on your Jekyll site
 - [Adding Ajax pagination to Jekyll](https://eduardoboucas.com/blog/2014/11/05/adding-ajax-pagination-to-jekyll.html)
 - ['About this Website', by Carter Allen](http://cartera.me/2010/08/12/about-this-website/)
 
-  > "Jekyll is everything that I ever wanted in a blogging engine. Really. It isn't perfect, but what's excellent about it is that if there's something wrong, I know exactly how it works and how to fix it. It runs on the your machine only, and is essentially an added"build" step between you and the browser. I coded this entire site in TextMate using standard HTML5 and CSS3, and then at the end I added just a few little variables to the markup. Presto-chango, my site is built and I am at peace with the world."
+  > "Jekyll is everything that I ever wanted in a blogging engine. Really. It isn't perfect, but what's excellent about it is that if there's something wrong, I know exactly how it works and how to fix it. It runs on the your machine only, and is essentially an added "build" step between you and the browser. I coded this entire site in TextMate using standard HTML5 and CSS3, and then at the end I added just a few little variables to the markup. Presto-chango, my site is built and I am at peace with the world."
 
 - A way to [extend Jekyll](https://github.com/rfelix/jekyll_ext) without forking and modifying the Jekyll gem codebase and some [portable Jekyll extensions](https://github.com/rfelix/jekyll_ext/wiki/Extensions) that can be reused and shared.
 - [Using your Rails layouts in Jekyll](https://numbers.brighterplanet.com/2010/08/09/sharing-rails-views-with-jekyll)

docs/pages/showcase.html

@@ -6,7 +6,7 @@ redirect_from:
   - /docs/sites/
 ---
 
-<p>Jekyll powers many company websites, here a few nice ones:</p>
+<p>Jekyll powers many company websites; here are a few nice ones:</p>
 
 <ul class="showcase" id="showcase">
   {% for entry in site.data.showcase reversed -%}

docs/pages/team.md

@@ -26,7 +26,10 @@ patch security vulnerabilities reported to them._
 _Emeritus Core Team Members were once members of Jekyll's Core Team._
 
 * Alfred (@alfredxing)
+* Ben (@benbalter)
 * Frank (@DirtyF)
 * Nick (@qrush)
+* Olivia
 * Parker (@parkr)
+* Pat (@pathawks)
 * Tom (@mojombo)

features/highlighting.feature

@@ -4,30 +4,42 @@ Feature: Syntax Highlighting
   And make them pretty for all the world to see
 
   Scenario: highlighting an apache configuration
-    Given I have an "index.html" file with content:
+    Given I have an "index.html" page with content:
       """
-      ---
-      ---
-
       {% highlight apache %}
       RewriteEngine On
       RewriteCond %{REQUEST_FILENAME} !-f
       RewriteCond %{REQUEST_FILENAME} !-d
       RewriteRule ^(.*)$ index.php [QSA,L]
       {% endhighlight %}
-
-      ```apache
-      RewriteEngine On
-      RewriteCond %{REQUEST_FILENAME} !-f
-      RewriteCond %{REQUEST_FILENAME} !-d
-      RewriteRule ^(.*)$ index.php [QSA,L]
-      ```
-      """
-    And I have a "_config.yml" file with content:
-      """
-      kramdown:
-        input: GFM
       """
     When I run jekyll build
     Then I should get a zero exit-status
     And I should see "<span class="nc">RewriteCond</span>" in "_site/index.html"
+
+  Scenario: marking lines 1 and 2 in a Ruby code block with valid syntax
+    Given I have an "index.html" page with content:
+      """
+      {% highlight ruby mark_lines="1 2" %}
+      module Jekyll
+        module Tags
+          class HighlightBlock < Liquid::Block
+      {% endhighlight %}
+      """
+    When I run jekyll build
+    Then I should get a zero exit-status
+    And I should see "<span class=\"hll\"><span class=\"k\">module</span> <span class=\"nn\">Jekyll</span>" in "_site/index.html"
+    And I should see "<span class=\"hll\">  <span class=\"k\">module</span> <span class=\"nn\">Tags</span>" in "_site/index.html"
+    And I should see "<span class=\"k\">class</span> <span class=\"nc\">HighlightBlock</span" in "_site/index.html"
+
+  Scenario: marking a single line in a Ruby code block with invalid syntax
+    Given I have an "index.html" page with content:
+      """
+      {% highlight ruby mark_lines=1 %}
+      module Jekyll
+        module Tags
+          class HighlightBlock < Liquid::Block
+      {% endhighlight %}
+      """
+    When I run jekyll build
+    Then I should see "Liquid Exception: Syntax Error" in the build output

features/include_relative_tag.feature

@@ -58,3 +58,22 @@ Feature: include_relative Tag
     Then I should get a zero exit status
     And the _site directory should exist
     And I should see "Welcome back Dear Reader!" in "_site/index.html"
+
+  Scenario: Include multiple files relative to a page at root
+    Given I have an "apple.md" page with foo "bar" that contains "{{ page.path }}, {{ page.foo }}"
+    And I have an "banana.md" page with content:
+      """
+        {% include_relative apple.md %}
+        {% include_relative cherry.md %}
+
+        {{ page.path }}
+      """
+    And I have an "cherry.md" page with foo "lipsum" that contains "{{ page.path }}, {{ page.foo }}"
+    When I run jekyll build
+    Then I should get a zero exit status
+    And the _site directory should exist
+    And I should see "<p>apple.md, bar</p>" in "_site/apple.html"
+    And I should see "<hr />\n<p>foo: bar" in "_site/banana.html"
+    And I should see "<hr />\n<p>foo: lipsum" in "_site/banana.html"
+    And I should see "<p>cherry.md, lipsum</p>" in "_site/cherry.html"
+    But I should not see "foo: lipsum" in "_site/cherry.html"

features/post_url_tag.feature

@@ -157,3 +157,37 @@ Feature: PostUrl Tag
     But the _site directory should exist
     And I should see "<p><a href=\"/cats%20and%20dogs/2019/02/04/hello-world.html\">Post 1</a></p>" in "_site/index.html"
     And I should see "<p><a href=\"/2019/02/05/hello-again.html\">Post 2</a></p>" in "_site/index.html"
+
+  Scenario: Calling for a post via a liquid variable
+    Given I have a _posts directory
+    And I have the following post:
+      | title       | date       | content           |
+      | Hello World | 2019-02-04 | Lorem ipsum dolor |
+    And I have an "index.md" page with content:
+      """
+      {% assign value='2019-02-04-hello-world' %}
+      [Welcome]({% post_url {{ value }} %})
+      """
+    When I run jekyll build
+    Then I should get a zero exit status
+    And the _site directory should exist
+    And I should see "<p><a href=\"/2019/02/04/hello-world.html\">Welcome</a></p>" in "_site/index.html"
+
+  Scenario: Calling for posts via a liquid variable in a for tag
+    Given I have a _posts directory
+    And I have the following post:
+      | title         | date       | content           |
+      | Hello World   | 2019-02-04 | Lorem ipsum dolor |
+      | We Meet Again | 2019-02-05 | Alpha beta gamma  |
+    And I have an "index.md" page with content:
+      """
+      {% assign posts = '2019-02-04-hello-world;2019-02-05-we-meet-again' | split: ';' %}
+      {%- for slug in posts -%}
+        [{{ slug }}]({% post_url {{ slug }} %})
+      {%- endfor %}
+      """
+    When I run jekyll build
+    Then I should get a zero exit status
+    And the _site directory should exist
+    And I should see "<a href=\"/2019/02/04/hello-world.html\">2019-02-04-hello-world</a>" in "_site/index.html"
+    And I should see "<a href=\"/2019/02/05/we-meet-again.html\">2019-02-05-we-meet-again</a>" in "_site/index.html"

features/step_definitions.rb

@@ -363,7 +363,21 @@ end
 #
 
 Then(%r!^I should see today's time in "(.*)"$!) do |file|
-  step %(I should see "#{seconds_agnostic_time(Time.now)}" in "#{file}")
+  seconds = 3
+  build_time = Time.now
+  content = file_contents(file)
+  date_time_pattern = /(\d{4}-\d{2}-\d{2}\s\d+:\d{2}:\d{2})/
+  match_data = content.match(date_time_pattern)
+  expect(match_data).not_to be_nil, "No date-time pattern found in #{file}"
+  date_time_str = match_data.captures
+  file_time = Time.parse("#{date_time_str}")
+  time_difference = (build_time - file_time).abs
+  expect(time_difference).to be <= seconds, <<~MSG
+    Expected time in #{file} to be within #{seconds} seconds of build time.
+    Build time: #{build_time}
+    File time:  #{file_time}
+    Difference: #{time_difference} seconds
+  MSG
 end
 
 #

features/support/helpers.rb

@@ -145,25 +145,6 @@ end
 
 #
 
-def seconds_agnostic_datetime(datetime = Time.now)
-  date, time, zone = datetime.to_s.split(" ")
-  time = seconds_agnostic_time(time)
-
-  [
-    Regexp.escape(date),
-    "#{time}:\\d{2}",
-    Regexp.escape(zone),
-  ].join("\\ ")
-end
-
-#
-
-def seconds_agnostic_time(time)
-  time = time.strftime("%H:%M:%S") if time.is_a?(Time)
-  hour, minutes, = time.split(":")
-  "#{hour}:#{minutes}"
-end
-
 # Helper method for Windows
 def dst_active?
   config = Jekyll.configuration("quiet" => true)

jekyll.gemspec

@@ -29,19 +29,23 @@ Gem::Specification.new do |s|
   s.rdoc_options     = ["--charset=UTF-8"]
   s.extra_rdoc_files = %w(README.markdown LICENSE)
 
-  s.required_ruby_version     = ">= 2.5.0"
+  s.required_ruby_version     = ">= 2.7.0"
   s.required_rubygems_version = ">= 2.7.0"
 
   s.add_runtime_dependency("addressable",           "~> 2.4")
+  s.add_runtime_dependency("base64",                "~> 0.2")
   s.add_runtime_dependency("colorator",             "~> 1.0")
+  s.add_runtime_dependency("csv",                   "~> 3.0")
   s.add_runtime_dependency("em-websocket",          "~> 0.5")
   s.add_runtime_dependency("i18n",                  "~> 1.0")
   s.add_runtime_dependency("jekyll-sass-converter", ">= 2.0", "< 4.0")
   s.add_runtime_dependency("jekyll-watch",          "~> 2.0")
+  s.add_runtime_dependency("json",                  "~> 2.6")
   s.add_runtime_dependency("kramdown",              "~> 2.3", ">= 2.3.1")
   s.add_runtime_dependency("kramdown-parser-gfm",   "~> 1.0")
   s.add_runtime_dependency("liquid",                "~> 4.0")
-  s.add_runtime_dependency("mercenary",             ">= 0.3.6", "< 0.5")
+  s.add_runtime_dependency("logger",                "~> 1.3")
+  s.add_runtime_dependency("mercenary",             "~> 0.3", ">= 0.3.6")
   s.add_runtime_dependency("pathutil",              "~> 0.9")
   s.add_runtime_dependency("rouge",                 ">= 3.0", "< 5.0")
   s.add_runtime_dependency("safe_yaml",             "~> 1.0")