`maybeInitFinished()` can emit the 'secure' event which
in turn destroys the connection in case of authentication
failure and sets `this.pair.ssl` to `null`.
If such condition appeared after non-empty read - loop will continue
and `clearOut` will be called on `null` object instead of
`crypto::Connection` instance. Resulting in the following assertion:
ERROR: Error: Hostname/IP doesn't match certificate's altnames
Assertion failed: handle->InternalFieldCount() > 0
fix#5756
The C++ API has been changed so the passed length is the byte size of
the data, not the length of the array.
This was done so users need to explicitly define how much memory they
want allocated.
`dns.lookup` defaults to selecting IPv4 record even if IPv6 is available
for the desired zone. Generally, this approach works, but if IPv4
address is unavailable - there'll be no other way to opt-out and connect using
IPv6 address than calling `dns.lookup` and passing it to `.connect()`
directly.
This commit adds `family` option to `net.connect` method to figure out
this issue.
It only fails once in about 1000 times, but that's too many.
It's timing dependent, and the main behavior is covered by the other
assertions in the test anyway.
This change is 100% backwards compatible.
This change will make using `EventEmitter` slightly simpler / nicer and
adheres to the best practice set forth by substack.
```js
var EventEmitter = require("events")
var emitter = new EventEmitter()
```
The only difference is that we now have to set `EventEmitter` as a
property of `EventEmitter` for backwards compatibility like we do with
[`Stream`][1]
We have also set the `usingDomains` property on the `EventEmitter`
constructor itself because that aligns with it's current usage of
`require("events").usingDomains = true`
There are other internals that would benefit from this change as well
like `StringDecoder`
This allows automatically-inserted headers to be removed permanently by
calling OutgoingMessage.removeHeader() on them, as if they were normal
headers.
In this situation:
writable.on('error', handler);
readable.pipe(writable);
writable.removeListener('error', handler);
writable.emit('error', new Error('boom'));
there is actually no error handler, but it doesn't throw, because of the
fix for stream.once('error', handler), in 23d92ec.
Note that simply reverting that change is not valid either, because
otherwise this will emit twice, being handled the first time, and then
throwing the second:
writable.once('error', handler);
readable.pipe(writable);
writable.emit('error', new Error('boom'));
Fix this with a horrible hack to make the stream pipe onerror handler
added before any other userland handlers, so that our handler is not
affected by adding or removing any userland handlers.
Closes#6007.
Commit 03e008d introduced src/tls_wrap.cc and src/tls_wrap.h but
said files copied on the order of 1 kLoC from src/node_crypto.cc
and src/node_crypto.h. This commit undoes some of the duplication.
Fixes#6024.
Add range checks for the offset, length and port arguments to
dgram.Socket#send(). Fixes the following assertion:
node: ../../src/udp_wrap.cc:264: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`offset < Buffer::Length(buffer_obj)' failed.
And:
node: ../../src/udp_wrap.cc:265: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`length <= Buffer::Length(buffer_obj) - offset' failed.
Interestingly enough, a negative port number was accepted until now but
silently ignored. (In other words, it would send the datagram to a
random port.)
This commit exposed a bug in the simple/test-dgram-close test which
has also been fixed.
This is a back-port of commit 41ec6d0 from the master branch.
Fixes#6025.
On windows, libuv will immediately make a `ReadConsole` call (in the
thread pool) when a 'flowing' `uv_tty_t` handle is switched to
line-buffered mode. That causes an immediate issue for some users,
since libuv can't cancel the `ReadConsole` operation on Windows 8 /
Server 2012 and up if the program switches back to raw mode later.
But even if this will be fixed in libuv at some point, it's better to
avoid the overhead of starting work in the thread pool and immediately
cancelling it afther that.
See also f34f1e3, where the same change is made for the opposite
flow, e.g. move `resume()` after `_setRawMode(true)`.
Fixes#5927
This is a backport of dfb0461 (see #5930) to the v0.10 branch.
On windows, libuv will immediately make a `ReadConsole` call (in the
thread pool) when a 'flowing' `uv_tty_t` handle is switched to
line-buffered mode. That causes an immediate issue for some users,
since libuv can't cancel the `ReadConsole` operation on Windows 8 /
Server 2012 and up if the program switches back to raw mode later.
But even if this will be fixed in libuv at some point, it's better to
avoid the overhead of starting work in the thread pool and immediately
cancelling it afther that.
See also f34f1e3, where the same change is made for the opposite
flow, e.g. move `resume()` after `_setRawMode(true)`.
Fixes#5927Closes#5930
RandomBytes() allocated memory with new[] which was then handed off to
Buffer::Use() which eventually releases it again with free().
Mixing the two is technically a violation of the spec and besides, it's
generally frowned upon.
In other Writable streams, the 'finish' event means that all of the data
was written, and flushed to the underlying system.
The 'prefinish' event means that end() was called, and all of the data
was processed, but not necessarily completely flushed.
This change brings the http OutgoingMessage classes more in sync with
the other Writable classes throughout Node.
Unfortunately, this change highlights an issue with http
IncomingMessages, where the _dump() method will not actually pull the
data off the wire. This is a minor issue that is typically only
relevant in test cases, and will be addressed in the next commit.
This removes a dubious performance "optimization" where strings body
chunks were concatenated to one another (and to the headers) without any
regard for their encoding.
Achieve a minor speed-up by looking up the timeout callback on the timer
object by using an array index rather than a named property.
Gives a performance boost of about 1% on the misc/timers benchmarks.
Code cleanup: don't call a Connection object `p` in some places, `c` in
other places and `ss` in yet other places. Let's just call it `conn`.
This also fixes about a million style errors in one fell swoop.
Don't create an Integer when setting a numeric index on an object or an
array, use the version of v8::Object::Set() that takes an uint32_t.
Change the types of the variables from int to uint32_t and clean up
some code consistency issues while we're here.
Don't set the oncomplete property in src/cares_wrap.cc, we can do it
just as easily in lib/dns.js.
Switch two closures to the 'function with _this_ object' model. Makes
it impossible for an overzealous closure to capture too much context
and accidentally hold on to too much memory.
* The test calls an internal API that changed in commit ca9eb71.
* Trying to reverse-lookup a bogus hostname now returns EINVAL rather
than the (bogus!) status code ENOTIMP.
Use v8::Integer::NewFromUnsigned() when updating the writeQueueSize
field.
Before this commit, it used v8::Integer::New() but that takes an
int32_t. It's unlikely for a write queue to grow beyond 2**31-1 bytes
but let's use the unsigned integer constructor anyway, just in case.
This is [1] applied ahead of time. Summary:
OpenBSD doesn't have <ucontext.h>. ucontext_t lives in <signal.h>
and is a typedef for struct sigcontext. There is no uc_mcontext.
[1] https://codereview.chromium.org/21705003/
Note: the patch has been accepted upstream but hasn't made its way into
a stable release yet.
No one in this day and age should be using SSLv2 so disable it by
default. You can re-enable it with `./configure --with-sslv2` but
there really should be no reason for that.
Alphabetical order should make it easier to find the switches you need
because we've got quite a lot of them now.
Keep --prefix at the top because that's arguably the one people will be
looking for most.
Don't run configure when the configure script has been touched. Doing so
would be okay if the Makefile passed the original arguments to configure
but it doesn't - it runs configure without any arguments, effectively
destroying the current configuration.
Remove this misfeature and instead print an error message telling the
user to (re-)run configure.
Change process.domain to use a getter/setter and access that property
via an array index. These are much faster to get from c++, and it can be
passed to _setupDomainUse and stored as a Persistent<Array>.
InDomain() and GetDomain() as trivial ways to access the domain
information in the native layer. Important because we'll be able to
quickly access if a domain is active. Instead of just whether the domain
module has been loaded.
Don't use v8::Object::SetHiddenValue() to keep a reference alive to the
buffer, we can just as easily do that from JS land and it's a lot faster
to boot.
Because the buffer is now a visible property of the write request
object, it's essential that we do *not* log it - we'd be effectively
serializing the whole buffer to a pretty-printed string.
v0.10 allows strings for the offset, length and port arguments to
dgram.send() and dgram.sendto() but master before this commit would
abort with the following assert:
node: ../../src/udp_wrap.cc:227: static void
node::UDPWrap::DoSend(const v8::FunctionCallbackInfo<v8::Value>&,
int): Assertion `args[2]->IsUint32()' failed.
Go beyond what v0.10 does and also add range checks: offset and length
should be >= 0, port should be between 1 and 65535.
That particular change needs to be back-ported to v0.10 because passing
a negative offset or length number aborts with the following assertions:
node: ../../src/udp_wrap.cc:264: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`offset < Buffer::Length(buffer_obj)' failed.
Or:
node: ../../src/udp_wrap.cc:265: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`length <= Buffer::Length(buffer_obj) - offset' failed.
Interestingly enough, a negative port number is accepted in v0.10 but
is silently ignored.
This commit exposed a bug in the simple/test-dgram-close test which
has also been fixed.
* Change calls to String::New() and String::NewSymbol() to their
respective one-byte, two-byte and UTF-8 counterparts.
* Add a FIXED_ONE_BYTE_STRING macro that takes a string literal and
turns it into a v8::Local<v8::String>.
* Add helper functions that make v8::String::NewFromOneByte() easier to
work with. Said function expects a `const uint8_t*` but almost every
call site deals with `const char*` or `const unsigned char*`. Helps
us avoid doing reinterpret_casts all over the place.
* Code that handles file system paths keeps using UTF-8 for backwards
compatibility reasons. At least now the use of UTF-8 is explicit.
* Remove v8::String::NewSymbol() entirely. Almost all call sites were
effectively minor de-optimizations. If you create a string only once,
there is no point in making it a symbol. If you are create the same
string repeatedly, it should probably be cached in a persistent
handle.
When a stream is flowing, and not in the middle of a sync read, and
the read buffer currently has a length of 0, we can just emit a 'data'
event rather than push it onto the array, emit 'readable', and then
automatically call read().
As it happens, this is quite a frequent occurrence! Making this change
brings the HTTP benchmarks back into a good place after the removal of
the .ondata/.onend socket kludge methods.
smalloc.alloc now accepts an optional third argument which allows
specifying the type of array that should be allocated. All available
types are now located on smalloc.Types.
* Moved the ToObject check out of smalloc::Alloc and into JS. Direct
usage of that method is for internal use only and so can bypass the
possible coercion.
* Same has been done with smalloc::SliceOnto.
* smalloc::CopyOnto will now throw if passed argument is not an object.
* Remove extra TargetFreeCallback function. There was a use for it when
it was working with a Local<T>, but that code has been removed making
the function superfluous.
There are some agent subclasses using this today.
Despite the addRequest function being undocumented internal API, it's
easy enough to just support the old signature for backwards
compatibility.
Add is_named_pipe(), is_named_pipe_ipc() and is_tcp() and update the
code base to use those rather than `stream->type == UV_FOO` and
`reinterpret_cast<uv_pipe_t*>(handle)->ipc` style checks.
Hide member fields behind getters. Make the fields themselves const
in the sense that the pointer is non-assignable - the pointed to object
remains mutable.
Makes reasoning about lifecycle and mutability a little easier.
`server.SNICallback` was initialized with `SNICallback.bind(this)`, and
therefore check `this.SNICallback === SNICallback` was always false, and
`_tls_wrap.js` always thought that it was a custom callback instead of
default one. Which in turn was causing clienthello parser to be enabled
regardless of presence of SNI contexts.
Don't create a superfluous Number object, just use the version of
v8::Object::Get() that takes an unsigned int. Convert the index to
unsigned int while we're here.
If an error listener is added to a stream using once() before it is
piped, it is invoked and removed during pipe() but before pipe() sees it
which causes it to be emitted again.
Fixes#4155#4978
The type of the expression `(uint16_t) server_names_len + 2` gets
implicitly widened to int. Change the type of server_names_len to
uint32_t to avoid the following warnings:
../../src/node_crypto_clienthello.cc:144: warning: comparison
between signed and unsigned integer expressions
../../src/node_crypto_clienthello.cc:146: warning: comparison
between signed and unsigned integer expressions
Quoting the CVE:
Google V8, as used in Google Chrome before 28.0.1500.95, allows
remote attackers to cause a denial of service or possibly have
unspecified other impact via vectors that leverage "type confusion."
Likely has zero impact on node.js because it only runs local, trusted
code but let's apply it anyway.
This is a back-port of upstream commit r15665. Original commit log:
Use internal array as API function cache.
R=yangguo@chromium.org
BUG=chromium:260106
TEST=cctest/test-api/Regress260106
Review URL: https://codereview.chromium.org/19159003Fixes#5973.
Flags and modes aren't the same, symlinks are followed in all of the
path but the last component, docs should say something about what the
mode argument is for and when its used, fs.openSync should point to the
function that contains the docs for its args, as fs.writeSync does.
This is [1] applied ahead of time. Summary:
OpenBSD doesn't have <ucontext.h>. ucontext_t lives in <signal.h>
and is a typedef for struct sigcontext. There is no uc_mcontext.
[1] https://codereview.chromium.org/21705003/
It shouldn't ignore it!
There're two possibile cases, which should be handled properly:
1. Having a default `SNICallback` which is using contexts, added with
`server.addContext(...)` routine
2. Having a custom `SNICallback`.
In first case we may want to opt-out setting `.onsniselect` method (and
thus save some CPU time), if there're no contexts added. But, if custom
`SNICallback` is used, `.onsniselect` should always be set, because
server contexts don't affect it.
Update a few more `Local<T>::New(isolate, persistent)` call sites to
`PersistentToLocal(isolate, persistent)` - the latter has a fast path
for non-weak persistent references.
When doing `FreeEmpty`, `NodeBIO` skips pre-allocated `head_` buffer.
However this might lead to double-freeing buffers since in `~NodeBIO()`
we're starting deallocation from `head_` buffer.
Commit 78d9094 updated src/*.cc to use the version of PersistentToLocal
that takes a v8::Isolate* as its first argument. This commit removes
the non-isolate version.
* Numeric values passed to alloc were converted to int32, not uint32
before the range check, which allows wrap around on ToUint32. This
would cause massive malloc calls and v8 fatal errors.
* dispose would not check if value was an Object, causing segfault if a
Primitive was passed.
* kMaxLength was not enumerable.
Build breakage accidentally introduced in 8e29ce9 during code cleanup.
HAVE_OPENSSL is always defined (as either 0 or 1) so use #if rather
than #ifdef.
Fixes#5979.
Run the garbage collector before running the actual test. It doesn't
matter now but if in the future something in node.js core creates a lot
of reclaimable garbage, that will break the test's expectation.
* Run the garbage collector before creating the big array. It doesn't
matter now but if in the future something in node.js core creates
a lot of reclaimable garbage, that will break the test's expectation.
* The first RSS check was being done too late. The garbage collector
might have run before the check, throwing off the 'reclaimed memory'
calculation.
* Due to changes in how V8 represents the big array internally, the
actual memory usage is just below 256 MB on x64. Update the test's
expectation.
Before this commit, events were set to undefined rather than deleted
from the EventEmitter's backing dictionary for performance reasons:
`delete obj.key` causes a transition of the dictionary's hidden class
and that can be costly.
Unfortunately, that introduces a memory leak when many events are added
and then removed again. The strings containing the event names are never
reclaimed by the garbage collector because they remain part of the
dictionary.
That's why this commit makes EventEmitter delete events again. This
effectively reverts commit 0397223.
Fixes#5970.
Change the build/include_order rule to match our preference:
project headers before system headers.
The rationale is that system headers before project headers makes it
easy to slip in bugs where a project header that requires a definition
from a system header, forgets to include the system header but still
compiles because the source files that include the project header
coincidentally include the system header too.
A good example is the size_t type. A project header file that needs the
definition of size_t should include stddef.h but forgetting to do so
will probably go unnoticed for a long time because almost every other
system header includes stddef.h (either directly or indirectly) and
almost every source file includes one or more system headers.
Ergo, project headers before system headers. It's a good thing.
To prevent all unnecessary calls to JS from MakeCallback, the remaining
two immediate return variables inTick and lastThrew have been added to
infoBox. Now MakeCallback should never need to call into JS unless it
absolutely has to.
Also removed Tock. Performance tests showed it was at least as fast or
faster than using a normal object, and this is more readable.
Avoid a costly buffer-to-string operation. Instead, allocate a new
buffer, copy the chunk header and data into it and send that.
The speed difference is negligible on small payloads but it really
shines with larger (10+ kB) chunks. benchmark/http/end-vs-write-end
with 64 kB chunks gives 45-50% higher throughput. With 1 MB chunks,
the difference is a staggering 590%.
Of course, YMMV will vary with real workloads and networks but this
commit should have a positive impact on CPU and memory consumption.
Big kudos to Wyatt Preul (@wpreul) for reporting the issue and providing
the initial patch.
Fixes#5941 and #5944.
Use the StringBytes::IsValidString() function introduced in commit
dce26cc to ensure that the input string meets the expectations of the
other StringBytes functions before processing it further.
Fixes the following assertion:
Assertion failed: (str->Length() % 2 == 0 && "invalid hex string
length"), function StorageSize, file ../../src/string_bytes.cc,
line 301.
Fixes#5725.
Performs a quick, non-exhaustive check on the input string to see if
it's compatible with the specified string encoding.
Curently it only checks that hex strings have a length that is a
multiple of two.
Don't throw an exception when the argument to %j is an object that
contains circular references, it's not helpful. Catch the exception
and return the string '[Circular]'.
Prior, strings would first be converted to a Buffer before being written
to disk. Now the intermediary step has been removed.
Other changes of note:
* Class member "must_free" was added to req_wrap so to track if the
memory needs to be manually cleaned up after use.
* External String Resource support, so the memory will be used directly
instead of copying out the data.
* Docs have been updated to reflect that if position is not a number
then it will assume null. Previously it specified the argument must be
null, but that was not how the code worked. An attempt was made to
only support == null, but there were too many tests that assumed !=
number would be enough.
* Docs update show some of the write/writeSync arguments are optional.
* Use ARRAY_SIZE() rather than scanning until we hit a NULL entry.
* Fix `-fsigned-char -Wnarrowing` compiler warnings. Harmless but
numerous and annoying.
* Static-ify the modp_group and mod_groups arrays.
* Const-ify the modp_groups array.
It imports the definition into every source file that includes
string_bytes.h, as evidenced by the build suddenly breaking left
and right because of missing Handle/Local/String/Value imports.
Passing the number of sent bytes to the callback is superfluous;
datagram sockets operate in atomic mode: either the sendmsg() system
call succeeds or it fails but it never does partial writes.
Instead, report send errors to the callback. UDP error reporting is
fairly haphazard on most platforms. You should not expect reliable
delivery of anything besides EMSGSIZE and (possibly) ENETDOWN and
ENETUNREACH.
Fixes#2608.
V8 3.20.9 enforces that external pointers are aligned on a two-byte
boundary.
We cannot portably guarantee that for the source code strings that
tools/js2c.py generates so simply stop using String::NewExternal()
altogether (and by extension String::ExternalAsciiStringResource).
Fixes the following run-time assert:
FATAL ERROR: v8::String::NewExternal() Pointer is not aligned
This prevents the following sort of thing from being confusing:
```javascript
stream.on('data', function() { console.error('got data'); });
stream.pause(); // stop reading
// turns out no data is available
stream.push(null);
// Hand the stream to someone else, who does stuff...
setTimeout(function() {
// too late! 'end' is already emitted!
stream.on('end', function() { console.error('got end'); });
});
```
With this change, the `end` event is not emitted until you call `read()`
*past* the EOF null. So, a paused stream will not swallow the `end`
event and emit it before you `resume()` the stream.
The title shouldn't be too long; libuv's uv_set_process_title() out of
security considerations no longer overwrites envp, only argv, so the
maximum title length is possibly quite short.
Fixes#5908.
And process.getgid() too.
Commit ed80638 changed fs.chown() and fs.fchown() to only accept
unsigned integers. Make process.getuid() and process.getgid() follow
suit.
This commit should unbreak npm on OS X - it's hitting the new 'uid must
be an unsigned int' check when installing as e.g. user 'nobody' (which
has an UID of -2 in /etc/passwd or 4294967294 when cast to an uid_t.)
Fixes#5904.
* uv: Upgrade to v0.10.13
* npm: Upgrade to v1.3.5
* os: Don't report negative times in cpu info (Ben Noordhuis)
* fs: Handle large UID and GID (Ben Noordhuis)
* url: Fix edge-case when protocol is non-lowercase (Shuan Wang)
* doc: Streams API Doc Rewrite (isaacs)
* node: call MakeDomainCallback in all domain cases (Trevor Norris)
* crypto: fix memory leak in LoadPKCS12 (Fedor Indutny)
If `obj` given to `cluster._getServer` has `_setServerData` or
`_getServerData` methods, the data will be synchronized across workers
and stored in master.
This incarnation of macros.py is only used to disable the (d)trace
macros. Rename it so it better reflects its purpose. A new macros.py
will be added in a follow-up commit.
Includes:
* No need for `typeof` when checking undefined.
* length is coerced to uint so no need to check if < 0.
* Stay consistent and always throw `new` errors.
* Returning offset + magic number in every write is error prone. Instead
return the central write function which returns the correct offset.
In a rush to implement the fix 35e0d60 I overlooked the logic that
causes 0-length buffer instantiation to automatically not assign the
parent regardless.
Before this commit, fs.chown() and fs.fchown() coerced the uid and gid
arguments to signed integers which is wrong because uid_t and gid_t are
unsigned on most all platforms and IDs that don't fit in a signed
integer do exist.
This commit changes the aforementioned functions to take unsigned ints
instead. No test because we can't assume the system has [GU]IDs that
large.
This change depends on joyent/libuv@d779eb5.
Fixes#5890.
SlowBuffer(0) passes NULL instead of doing malloc(0). So when someone
attempted to SlowBuffer(0).slice(0, 1) an assert would fail in
smalloc::SliceOnto.
It's important that the check go where it is because the resulting
Buffer needs to have external array data allocated. In the case a user
tries to slice a zero length Buffer it will also have NULL passed as the
data argument.
Also fixed where the .parent attribute was set for zero length Buffers.
There is no need to track the source of slice if the slice isn't
actually occurring.
Closes#5860
In streams2, there is an "old mode" for compatibility. Once switched
into this mode, there is no going back.
With this change, there is a "flowing mode" and a "paused mode". If you
add a data listener, then this will start the flow of data. However,
hitting the `pause()` method will switch *back* into a non-flowing mode,
where the `read()` method will pull data out.
Every time `read()` returns a data chunk, it also emits a `data` event.
In this way, a passive data listener can be added, and the stream passed
off to some other reader, for use with progress bars and the like.
There is no API change beyond this added flexibility.
Just forward declare struct sockaddr, the struct is never actually
dereferenced in src/node_internals.h.
Before this commit, it included sys/socket.h but that header doesn't
exist on Windows.
Libuv now returns errors directly. Make everything in src/ and lib/
follow suit.
The changes to lib/ are not strictly necessary but they remove the need
for the abominations that are process._errno and node::SetErrno().
Prep work for removing process._errno. The handle.getsockname() function
will return a status code in the future and set the address and port
properties on the object that's passed in from JS land.
Commit 636ca7c adds an optimization that casts strong Persistent<T>
handles directly to Local<T> handles to avoid the overhead of creating
new HandleScope-rooted Local<T> handles all the time.
One gotcha that I missed is that it's no longer legal to reference the
Local<T> after calling Persistent<T>::Dispose(). This commit addresses
that.
Helps catch bugs early on. Without it, V8 throws the fairly
unhelpful exception "TypeError: undefined is not a function" -
unhelpful because there is no stack trace.
It will be confusing if later on we add Buffer#dispose(), and smalloc is
its own cpp api anyways. So instead create a new require('smalloc') to
expose the previous Buffer.alloc/dispose methods, and expose copyOnto
and kMaxLength as well.
Other changes:
* Added documentation and additional tests.
* smalloc::CopyOnto has changed from using assert() to throwing errors
on bad argument values because it is not exposed to the user.
* Minor style fixes.
When using url.parse(), path and pathname usually return '/' when there
is no path available. However when you have a protocol that contains
non-lowercase letters and the input string does not have a trailing
slash, both path and pathname will be undefined.
The Streams API doc is now broken up into 3 sections:
1. API for Consumers
2. API for Implementors
3. Details and Extras
This addresses one of the biggest points of confusion for new users who
start to consume streams, and get the impression that they have to do
lots of extra work and implement classes and such, just to get some data
out of a file.
In fa10b75 the assert to check if data == NULL was remove for
smalloc::Alloc with no callback. It should have also been removed where
a callback is accepted.
No sense in making sure that length == 0 if data == NULL because devs
already have to be responsible for checking that length is the same as
the char* they're passing in.
It hits a compiler bug in gcc <= 4.4 similar to the issue that was
recently addressed in commit 157d2bc:
../deps/v8/include/v8.h: In function ‘char*
node::Buffer::Data(v8::Persistent&) [with TypeName = v8::Object]’:
../src/node_crypto.cc:1123: instantiated from here
../deps/v8/include/v8.h:876: error: ‘class v8::Data’ is not a
function,
../src/node_internals.h:356: error: conflict with ‘template char*
node::Buffer::Data(v8::Persistent&)’
../src/node_internals.h:357: error: in call to ‘Data’
Remove the helper function, it was only used in a couple of places.
Should fix the build on Ubuntu 10.04.
Fixes#5844.
Previously there was no way to pass a Function callback directly to
MakeCallback and support domains. The check has been added so that users
never have to worry about supporting domains while using MakeCallback.
X509_STORE_add_cert increment reference of passed `x509` cert,
`X509_free` must be called to avoid memory leak.
This is a back-port of commit c1db1ec from the master branch.
* uv: Upgrade to v0.10.12
* npm: Upgrade to 1.3.2
* windows: get proper errno (Ben Noordhuis)
* tls: only wait for finish if we haven't seen it (Timothy J Fontaine)
* http: Dump response when request is aborted (isaacs)
* http: use an unref'd timer to fix delay in exit (Peter Rust)
* zlib: level can be negative (Brian White)
* zlib: allow zero values for level and strategy (Brian White)
* buffer: add comment explaining buffer alignment (Ben Noordhuis)
* string_bytes: properly detect 64bit (Timothy J Fontaine)
* src: fix memory leak in UsingDomains() (Ben Noordhuis)
A pooled https agent may get a Connection: close, but never finish
destroying the socket as the prior request had already emitted finish
likely from a pipe.
Since the socket is not marked as destroyed it may get reused by the
agent pool and result in an ECONNRESET.
re: #5712#5739
Instead of destroying sockets when there are no pending requests, put
them in a freeSockets list, and unref() them so that they do not keep
the event loop open.
Also, set the default max sockets to Infinity, to prevent the awful
surprising deadlocks that happen when more connections are made.
When creating a slice, make sure to propagate the originating parent.
This is to prevent a buf.parent.parent.(etc) scenario.
Also speed up the constructor by preventing lookup of non-existant
properties by setting them beforehand in the prototype. (see
https://github.com/joyent/node/commit/7ce5a31#commitcomment-3332779)
Since the SlabAllocator was removed the buffer length/offset is no
longer sent to the onread callback. The benchmarks have been updated to
reflect that.
Fix bug where if dev passed a callback to Alloc then called AllocDispose
it wouldn't bother to pass the data to the callback and instead would
just free it.
There was previously up to a second exit delay when exiting node
right after an http request/response, due to the utcDate() function
doing a setTimeout to update the cached date/time.
Fixing this should increase the performance of our http tests.
This is a big commit that touches just about every file in the src/
directory. The V8 API has changed in significant ways. The most
important changes are:
* Binding functions take a const v8::FunctionCallbackInfo<T>& argument
rather than a const v8::Arguments& argument.
* Binding functions return void rather than v8::Handle<v8::Value>. The
return value is returned with the args.GetReturnValue().Set() family
of functions.
* v8::Persistent<T> no longer derives from v8::Handle<T> and no longer
allows you to directly dereference the object that the persistent
handle points to. This means that the common pattern of caching
oft-used JS values in a persistent handle no longer quite works,
you first need to reconstruct a v8::Local<T> from the persistent
handle with the Local<T>::New(isolate, persistent) factory method.
A handful of (internal) convenience classes and functions have been
added to make dealing with the new API a little easier.
The most visible one is node::Cached<T>, which wraps a v8::Persistent<T>
with some template sugar. It can hold arbitrary types but so far it's
exclusively used for v8::Strings (which was by far the most commonly
cached handle type.)
The previous commit removes our patch that builds V8 at -O2 rather
than -O3 so there is not much point in keeping the configure switch
around.
The reason it did so was to work around an assortment of compiler and
linker bugs. In particular, certain combinations of g++ and binutils
generate bad or no code when -ffunction-sections or -finline-functions
is enabled (which -O3 implicitly does.)
It was quite the problem back in the day because everyone and his dog
built from source. Now that we have prebuilt binaries and packages
available, there is no longer a pressing need to be so accommodating.
If you experience spurious (or possibly not so spurious) segmentation
faults after this commit, you need to upgrade your compiler/linker
toolchain.
UsingDomains() assigned process_tickCallback when it had already
been set by MakeCallback() a few frames down the call stack.
Dispose the handle first or we'll retain whatever is in the lexical
closure of the old process._tickCallback function.
Fixes#5795.
If a transform stream has objectMode = true, it should
allow falsey values other than (null) like 0, false, ''.
null is reserved to indicate stream eof but other falsey
values should flow through properly.
Now that Buffer instantiation has improved, the SlabAllocator is an
unnecessary layer of complexity preventing further performance
optimizations.
Currently there is a small performance loss with very small stream
requests, but this will soon be addressed.
Assert that when the client closes it has seen an error, this prevents
the test from timing out.
Also queue a second write in the case that we were able to send the
buffer before the other side closed the connection.
There was previously up to a second exit delay when exiting node
right after an http request/response, due to the utcDate() function
doing a setTimeout to update the cached date/time.
Fixing this should increase the performance of our http tests.
Assert that when the client closes it has seen an error, this prevents
the test from timing out.
Also queue a second write in the case that we were able to send the
buffer before the other side closed the connection.
Most TryCatch blocks have SetVerbose flag on, this tells V8 to report
uncaught exceptions to debugger.
FatalException handler is called from V8 Message listener instead from
the place where TryCatch was used. Otherwise uncaught exceptions are
logged twice.
See comment in `deps/v8/include/v8.h` for explanation of SetVerbose
flag:
> By default, exceptions that are caught by an external exception
> handler are not reported. Call SetVerbose with true on an
> external exception handler to have exceptions caught by the
> handler reported as if they were not caught.
The flag is used by `Isolate::ShouldReportException()`, which is called
by `Isolate::DoThrow()` to decide whether an exception is considered
uncaught.
Might cause write head running over read head, when there were no
allocation and `Commit()` was called. Source of at least one test
failure on windows (`simple/test-https-drain.js`).
gcc 4.2 on OS X gets confused about the call to node::Buffer::Data().
Fully qualify the function name to help it along.
Fixes the following build error:
../../deps/v8/include/v8.h: In function ‘char*
node::Buffer::Data(v8::Handle<v8::Value>)’:
../../deps/v8/include/v8.h:900: error: ‘class v8::Data’
is not a function,
../../src/node_buffer.h:38: error:
conflict with ‘char* node::Buffer::Data(v8::Handle<v8::Object>)’
../../src/node_buffer.cc:94: error:
in call to ‘Data’
Buffer(<String>) used to pass the string to js where it would then be
passed back to cpp for processing. Now only the buffer object
instantiation is done in js and the string is processed in cpp.
Also added a Buffer api that also accepts the encoding.
Old fill would take the char code of the first character and wrap around
the int to fit in the 127 range. Now fill will duplicate whatever string
is given through the entirety of the buffer.
Note: There is one bug around ending on a partial fill of any character
outside the ASCII range.
While the new Buffer implementation is much faster we still have the
necessity of using Buffer pools. This is undesirable because it may
still lead to unwanted memory retention, but for the time being this is
the best solution.
Because of this re-introduction, and since there is no more SlowBuffer
type, the SlowBuffer method has been re-purposed to return a non-pooled
Buffer instance. This will be helpful for developers to store data for
indeterminate lengths of time without introducing a memory leak.
Another change to Buffer pools was that they are only allocated if the
requested chunk is < poolSize / 2. This was done because allocations are
much quicker now, and it's a better use of the pool.
Memory allocations are now done through smalloc. The Buffer cc class has
been removed completely, but for backwards compatibility have left the
namespace as Buffer.
The .parent attribute is only set if the Buffer is a slice of an
allocation. Which is then set to the alloc object (not a Buffer).
The .offset attribute is now a ReadOnly set to 0, for backwards
compatibility. I'd like to remove it in the future (pre v1.0).
A few alterations have been made to how arguments are either coerced or
thrown. All primitives will now be coerced to their respective values,
and (most) all out of range index requests will throw.
The indexes that are coerced were left for backwards compatibility. For
example: Buffer slice operates more like Array slice, and coerces
instead of throwing out of range indexes. This may change in the future.
The reason for wanting to throw for out of range indexes is because
giving js access to raw memory has high potential risk. To mitigate that
it's easier to make sure the developer is always quickly alerted to the
fact that their code is attempting to access beyond memory bounds.
Because SlowBuffer will be deprecated, and simply returns a new Buffer
instance, all tests on SlowBuffer have been removed.
Heapdumps will now show usage under "smalloc" instead of "Buffer".
ParseArrayIndex was added to node_internals to support proper uint
argument checking/coercion for external array data indexes.
SlabAllocator had to be updated since handle_ no longer exists.
If the user knows the allocation is no longer needed then the memory can
be manually released.
Currently this will not ClearWeak the Persistent, so the callback will
still run.
If the user passed a ClearWeak callback, and then disposed the object,
the buffer callback argument will == NULL.
smalloc is a simple utility for quickly allocating external memory onto
js objects. This will be used to centralize how memory is managed in
node, and will become the backer for Buffers. So in the future crypto's
SlabBuffer, stream's SlabAllocator will be removed.
Note on the js API: because no arguments are optional the order of
arguments have been placed to match their cc counterparts as closely as
possible.
The console module has always been called 'stdio' in the
table-of-contents, but nowhere else, since its name is
'console'. This makes it difficult to find.
This is a back-port of commit 226a20d from the master branch.
Libuv may provide a NULL buffer to the uv_read callback in case of an
error, so with this assert we'd be using the api incorrectly. None of
the current DoRead implementations rely on this constraint, either.
The console module has always been called 'stdio' in the
table-of-contents, but nowhere else, since its name is
'console'. This makes it difficult to find.
Resolves minor discrepancies between android and standard POSIX systems.
In addition, some configure parameters were added, and a helper-script
for android configuration. Ideally, this script should be merged into
the standard configure script.
To build for android, source the android-configure script with an NDK
path:
source ./android-configure ~/android-ndk-r8d
This will create an android standalone toolchain and export the
necessary environment parameters.
After that, build as normal:
make -j8
After the build, you should now have android-compatible NodeJS binaries.
Suppress the following warning:
../../src/cares_wrap.cc: In function ‘v8::Handle<v8::Value>
node::cares_wrap::SetServers(const v8::Arguments&)’:
../../src/cares_wrap.cc:1017:5: warning: ‘uv_ret.uv_err_s::code’
may be used uninitialized in this function [-Wuninitialized]
Split `tls.js` into `_tls_legacy.js`, containing legacy
`createSecurePair` API, and `_tls_wrap.js` containing new code based on
`tls_wrap` binding.
Remove tests that are no longer useful/valid.
In case of cross-compilation host_arch_cc() function could return
target arch if CC was set to target arch compiler. Host arch
compiler should always be used in this case. This was broken
by commit 707863c.
This reverts commit a40133d10c.
Unfortunately, this breaks socket.io. Even though it's not strictly an
API change, it is too subtle and in too brittle an area of node, to be
done in a stable branch.
Conflicts:
doc/api/http.markdown
When large strings are used they cause v8's GC to spend a lot more time
cleaning up. In these cases it's much faster to use external string
resources.
UTF8 strings do not use external string resources because only one and
two byte external strings are supported.
EXTERN_APEX is the value at which v8's GC overtakes performance.
The following table has the type and buffer size that use to encode the
strings as rough estimates of the percentage of performance gain from
this patch (UTF8 is missing because they cannot be externalized).
encoding 128KB 1MB 5MB
-----------------------------
ASCII 58% 208% 250%
HEX 15% 74% 86%
BASE64 11% 74% 71%
UCS2 2% 225% 398%
BINARY 2234% 1728% 2305%
BINARY is so much faster across the board because of using the new v8
WriteOneByte API.
v8 has a new API to write out strings to memory. This has been
implemented.
One other change of note is BINARY encoded strings have a new
implementation. This has improved performance substantially.
Clang branch release_33 would optimize out a != NULL check because of
some undefined behavior. This is a floating patch as a backport of that
fix.
Committed: http://code.google.com/p/v8/source/detail?r=13570
Normalize the encoding in getEncoding() before using it. Fixes a
"AssertionError: Cannot change encoding" exception when the caller
mixes "utf8" and "utf-8".
Fixes#5655.
Before this commit NodeBIO never shrank, possibly consuming a lot of
memory (depending on reader's haste).
All buffers between write_head's child and read_head should be
deallocated on read, leaving only space left in write_head and in the
next buffer.
Commit 0bba5902 accidentally (or maybe erroneously) added node_isolate
to src/node.h and src/node_object_wrap.h.
Undo that, said variable is not for public consumption. Add-on authors
should use v8::Isolate::GetCurrent() instead.
I missed that while reviewing. Mea culpa.
Fixes#5639.
This is only relevant for CentOS 6.3 using kernel version 2.6.32.
On other linuxes and darwin, the `read` call gets an ECONNRESET in that
case. On sunos, the `write` call fails with EPIPE.
However, old CentOS will occasionally send an EOF instead of a
ECONNRESET or EPIPE when the client has been destroyed abruptly.
Make sure we don't keep trying to write or read more in that case.
Fixes#5504
However, there is still the question of what libuv should do when it
gets an EOF. Apparently in this case, it will continue trying to read,
which is almost certainly the wrong thing to do.
That should be fixed in libuv, even though this works around the issue.
In cases where there are multiple @-chars in a url, Node currently
parses the hostname and auth sections differently than web browsers.
This part of the bug is serious, and should be landed in v0.10, and
also ported to v0.8, and releases made as soon as possible.
The less serious issue is that there are many other sorts of malformed
urls which Node either accepts when it should reject, or interprets
differently than web browsers. For example, `http://a.com*foo` is
interpreted by Node like `http://a.com/*foo` when web browsers treat
this as `http://a.com%3Bfoo/`.
In general, *only* the `hostEndingChars` should be the characters that
delimit the host portion of the URL. Most of the current `nonHostChars`
that appear in the hostname should be escaped, but some of them (such as
`;` and `%` when it does not introduce a hex pair) should raise an
error.
We need to have a broader discussion about whether it's best to throw in
these cases, and potentially break extant programs, or return an object
that has every field set to `null` so that any attempt to read the
hostname/auth/etc. will appear to be empty.
In some cases, the http CONNECT/Upgrade API is unshifting an empty
bodyHead buffer onto the socket.
Normally, stream.unshift(chunk) does not set state.reading=false.
However, this check was not being done for the case when the chunk was
empty (either `''` or `Buffer(0)`), and as a result, it was causing the
socket to think that a read had completed, and to stop providing data.
This bug is not limited to http or web sockets, but rather would affect
any parser that unshifts data back onto the source stream without being
very careful to never unshift an empty chunk. Since the intent of
unshift is to *not* change the state.reading property, this is a bug.
Fixes#5557FixesLearnBoost/socket.io#1242
Remove the need to call start/stop the uv_idle spinner between
MakeCallbacks. The one place where the tick processor needs to be kicked
is where a user catches uncaughtException. For that we'll now use
setImmediate, which accomplishes the same task.
maxTickDepth checks have been removed for domains and replaced with a
flag that checks if the last callback threw. If it did then execution of
the remaining tickQueue is deferred to the spinner.
This is to prevent domains from entering a continuous loop when an error
callback also throws an error.
Removes the check for maxTickDepth for non-domain callbacks. So a user
can starve I/O by setting a recursive nextTick.
The domain case is more complex and will be addressed in another commit.
Previous code was calling uv_loop_delete() directly on a running loop,
which led to race condition aborts/segfaults within libuv. This change
changes the watchdog thread to call uv_run() with UV_RUN_ONCE so that
the call exits after either the timer times out or uv_async_send() is
called from the main thread in Watchdog::Destroy(). The timer/async
handles are then closed and uv_run() with UV_RUN_DEFAULT is called so
that libuv has a chance to cleanup before the thread exits. The main
thread meanwhile calls uv_thread_join() and then uv_loop_delete() to
complete the cleanup.
Before this, entering something like:
> JSON.parse('066');
resulted in the "..." prompt instead of displaying the expected
"SyntaxError: Unexpected number"
1. Emit `sslOutEnd` only when `_internallyPendingBytes() === 0`.
2. Read before checking `._halfRead`, otherwise we'll see only previous
value, and will invoke `._write` callback improperly.
3. Wait for both `end` and `finish` events in `.destroySoon`.
4. Unpipe encrypted stream from socket to prevent write after destroy.
Stream's `._write()` callback should be invoked only after it's opposite
stream has finished processing incoming data, otherwise `finish` event
fires too early and connection might be closed while there's some data
to send to the client.
see #5544
Quote from SSL_shutdown man page:
The output of SSL_get_error(3) may be misleading,
as an erroneous SSL_ERROR_SYSCALL may be flagged even though
no error occurred.
Also, handle all other errors to prevent assertion in `ClearError()`.
When writing bad data to EncryptedStream it'll first get to the
ClientHello parser, and, only after it will refuse it, to the OpenSSL.
But ClientHello parser has limited buffer and therefore write could
return `bytes_written` < `incoming_bytes`, which is not the case when
working with OpenSSL.
After such errors ClientHello parser disables itself and will
pass-through all data to the OpenSSL. So just trying to write data one
more time will throw the rest into OpenSSL and let it handle it.
Otherwise, writing an empty string causes the whole program to grind to
a halt when piping data into http messages.
This wasn't as much of a problem (though it WAS a bug) in 0.8 and
before, because our hyperactive 'drain' behavior would mean that some
*previous* write() would probably have a pending drain event, and cause
things to start moving again.
This saves a few calls to gettimeofday which can be expensive, and
potentially subject to clock drift. Instead use the loop time which
uses hrtime internally.
fixes#5497
This commit adds an optimization to the HTTP client that makes it
possible to:
* Pack the headers and the first chunk of the request body into a
single write().
* Pack the chunk header and the chunk itself into a single write().
Because only one write() system call is issued instead of several,
the chances of data ending up in a single TCP packet are phenomenally
higher: the benchmark with `type=buf size=32` jumps from 50 req/s to
7,500 req/s, a 150-fold increase.
This commit removes the check from e4b716ef that pushes binary encoded
strings into the slow path. The commit log mentions that:
We were assuming that any string can be concatenated safely to
CRLF. However, for hex, base64, or binary encoded writes, this
is not the case, and results in sending the incorrect response.
For hex and base64 strings that's certainly true but binary strings
are 'das Ding an sich': string.length is the same before and after
decoding.
Fixes#5528.
Consider a user on his Mac, who wants to cross-compile for his Linux ARM device:
./configure --dest-cpu=arm --dest-os=linux
Before this patch, for example, DTrace probes would incorrectly attempt to be
enabled because the configure script is running on a MacOS machine, even though
we're trying to compile a binary for `linux`.
With this patch, the `--dest-os` flag is respected throughout the configure
script, thus leaving DTrace probes disabled in this cross-compiling scenario.
When an internal api needs a timeout, they should use
timers._unrefActive since that won't hold the loop open. This solves
the problem where you might have unref'd the socket handle but the
timeout for the socket was still active.
Previously one could write anywhere in a buffer pool if they accidently
got their offset wrong. Mainly because the cc level checks only test
against the parent slow buffer and not against the js object properties.
So now we check to make sure values won't go beyond bounds without
letting the dev know.
Because of variations in different base64 implementation, it's been
decided to strip all padding from the end of a base64 string and
calculate its size from that.
Add localAddress and localPort properties to tls.CleartextStream.
Like remoteAddress and localPort, delegate to the backing net.Socket
object.
Refs #5502.
Instead of String::New every time, use a Persistent sym. This can be
accomplished in two ways:
1) Local<String> str = *persistent_str_sym;
2) Handle<String> str = persistent_str_sym;
I've chosen to use the latter method for simplicity's sake.
Other small changes include creating syms on Initialize and removing
unnecessary Local casting on return values.
The default encoding is 'buffer'. When the input is a string, treat it
as 'binary'. Fixes the following assertion:
node: ../src/string_bytes.cc:309: static size_t
node::StringBytes::StorageSize(v8::Handle<v8::Value>, node::encoding):
Assertion `0 && "buffer encoding specified but string provided"'
failed.
Introduced in 64fc34b2.
Fixes#5482.
Test case:
var t = setInterval(function() {}, 1);
process.nextTick(t.unref);
Output:
Assertion failed: (args.Holder()->InternalFieldCount() > 0),
function Unref, file ../src/handle_wrap.cc, line 78.
setInterval() returns a binding layer object. Make it stop doing that,
wrap the raw process.binding('timer_wrap').Timer object in a Timeout
object.
Fixes#4261.
Commit 38149bb changes http.get() and http.request() to escape unsafe
characters. However, that creates an incompatibility with v0.10 that
is difficult to work around: if you escape the path manually, then in
v0.11 it gets escaped twice. Change lib/http.js so it no longer tries
to fix up bad request paths, simply reject them with an exception.
The actual check is rather basic right now. The full check for illegal
characters is difficult to implement efficiently because it requires a
few characters of lookahead. That's why it currently only checks for
spaces because those are guaranteed to create an invalid request.
Fixes#5474.
getServers returns an array of ips that are currently being used for
resolution
setServers takes an array of ips that are to be used for resolution,
this will throw if there's invalid input but preserve the original
configuration
This also templatizes the Buffer::*Slice functions, and the template
function probably cannot be safely used outside of Node. However, it
also SHOULD not be used outside of Node, so this is arguably a feature
as well as a caveat.
Pretty much everything assumes strings to be utf-8, but crypto
traditionally used binary strings, so we need to keep the default
that way until most users get off of that pattern.
If there is an encoding, and we do 'stream.push(chunk, enc)', and the
encoding argument matches the stated encoding, then we're converting from
a string, to a buffer, and then back to a string. Of course, this is a
completely pointless bit of work, so it's best to avoid it when we know
that we can do so safely.
Empirical evidence suggests that OS-level load balancing (that is,
having multiple processes listen on a socket and have the operating
system wake up one when a connection comes in) produces skewed load
distributions on Linux, Solaris and possibly other operating systems.
The observed behavior is that a fraction of the listening processes
receive the majority of the connections. From the perspective of the
operating system, that somewhat makes sense: a task switch is expensive,
to be avoided whenever possible. That's why the operating system likes
to give preferential treatment to a few processes, because it reduces
the number of switches.
However, that rather subverts the purpose of the cluster module, which
is to distribute the load as evenly as possible. That's why this commit
adds (and defaults to) round-robin support, meaning that the master
process accepts connections and distributes them to the workers in a
round-robin fashion, effectively bypassing the operating system.
Round-robin is currently disabled on Windows due to how IOCP is wired
up. It works and you can select it manually but it probably results in
a heavy performance hit.
Fixes#4435.
Commit 9352c19 ("child_process: don't emit same handle twice") trades
one bug for another.
Before said commit, a handle was sometimes delivered with messages it
didn't belong to.
The bug fix introduced another bug that needs some explaining. On UNIX
systems, handles are basically file descriptors that are passed around
with the sendmsg() and recvmsg() system calls, using auxiliary data
(SCM_RIGHTS) as the transport.
node.js and libuv depend on the fact that none of the supported systems
ever emit more than one SCM_RIGHTS message from a recvmsg() syscall.
That assumption is something we should probably address someday for the
sake of portability but that's a separate discussion.
So, SCM_RIGHTS messages are never coalesced. SCM_RIGHTS and normal
messages however _are_ coalesced. That is, recvmsg() might return this:
recvmsg(); // { "message-with-fd", "message", "message" }
The operating system implicitly breaks pending messages along
SCM_RIGHTS boundaries. Most Unices break before such messages but Linux
also breaks _after_ them. When the sender looks like this:
sendmsg("message");
sendmsg("message-with-fd");
sendmsg("message");
Then on most Unices the receiver sees messages arriving like this:
recvmsg(); // { "message" }
recvmsg(); // { "message-with-fd", "message" }
The bug fix in commit 9352c19 assumes this behavior. On Linux however,
those messages can also come in like this:
recvmsg(); // { "message", "message-with-fd" }
recvmsg(); // { "message" }
In other words, it's incorrect to assume that the file descriptor is
always attached to the first message. This commit makes node wise up.
Fixes#5330.
This adds proper support for the following situation:
w.cork();
w.write(...);
w.cork();
w.write(...);
w.uncork();
w.write(...);
w.uncork();
This is relevant when you have a function (as we do in HTTP) that wants
to use cork, but in some cases, want to have a cork/uncork *around*
that function, without losing the benefits of writev.
In synchronous Writable streams (where the _write cb is called on the
current tick), the 'finish' event (and thus the end() callback) can in
some cases be called before all the write() callbacks are called.
Use a counter, and have stream.Transform rely on the 'prefinish' event
instead of the 'finish' event.
This has zero effect on most streams, but it corrects an edge case and
makes it perform more deterministically, which is a Good Thing.
uv_async_t handles for dispatching of debug messages and
emitting NODE_DEBUG_ENABLED used to be initialized every time
node::EnableDebug() was called, which happened every time
user sends a SIGUSR1.
Now they are initialized only once from node::Init() during
application start.
Implement support for debugging cluster workers. Each worker process
is assigned a new debug port in an increasing sequence.
I.e. when master process uses port 5858, then worker 1 uses port 5859,
worker 2 uses port 5860, and so on.
Introduce new command-line parameter '--debug-port=' which sets debug_port
but does not start debugger. This option works for all node processes, it
is not specific to cluster workers.
Fixesjoyent/node#5318.
Preserve default install prefix seen in process.config, but use DESTDIR
for installing to deliniate 32/64 versions, avoid conflicts with PREFIX
settings in config.mk
Preserve default install prefix seen in process.config, but use DESTDIR
for installing to deliniate 32/64 versions, avoid conflicts with PREFIX
settings in config.mk
Change vcbuild.bat to ignore VCINSTALLDIR environment variable,
always check for specific VS version and set GYP_MSVS_VERSION
accordingly. Otherwise GYP generates project files in format
that cannot be compiled by VS2012.
When developer calls setBreakpoint with an unknown script name,
we convert the script name into regular expression matching all
paths ending with given name (name can be a relative path too).
To create such breakpoint in V8, we use type `scriptRegEx`
instead of `scriptId` for `setbreakpoint` request.
To restore such breakpoint, we save the original script name
send by the user. We use this original name to set (restore)
breakpoint in the new child process.
This is a back-port of commit 5db936d from the master branch.
After much investigation it turns out that the affected servers are
buggy. user-service.condenastdigital.com:443 in particular seems to
reject large TLS handshake records. Cutting down the number of
advertised ciphers or disabling SNI fixes the issue.
Similarly, passing { secureOptions: constants.SSL_OP_NO_TLSv1_2 }
seems to fix most connection issues with IIS servers.
Having to work around buggy servers is annoying for our users but not
a reason to downgrade OpenSSL. Therefore, revert it.
This reverts commit 4fdb8acdae.
Add a watchdog class which executes a timer in a separate event loop in
a separate thread that will terminate v8 execution if it expires.
Add timeout argument to functions in vm module which use the watchdog
if a non-zero timeout is specified.
This commit undoes the downgrade from OpenSSL v1.0.1e to v1.0.0f,
effectively upgrading OpenSSL to v1.0.1e again. The reason for the
downgrade was to work around compatibility issues with certain TLS
servers in the stable branch. See the commit log of 4fdb8ac and the
linked issue for details. We're going to revisit that in the master
branch.
This reverts commit 4fdb8acdae.
Forward-port the comments from commit 01e2920 (v0.10) to the master
branch. Everything else from that patch already exists in master.
It didn't merge cleanly because lib/http.js has been split up in
several files.
Several people have reported issues with IIS and Resin servers (or maybe
SSL terminators sitting in front of those servers) that are fixed by
downgrading OpenSSL. The AESNI performance improvements were nice but
stability is more important. Downgrade OpenSSL from 1.0.1e to 1.0.0f.
Fixes#5360 (and others).
When developer calls setBreakpoint with an unknown script name,
we convert the script name into regular expression matching all
paths ending with given name (name can be a relative path too).
To create such breakpoint in V8, we use type `scriptRegEx`
instead of `scriptId` for `setbreakpoint` request.
To restore such breakpoint, we save the original script name
send by the user. We use this original name to set (restore)
breakpoint in the new child process.
Fixed a bug in debugger repl where `restart` command did not work
when a custom debug port was specified via command-line option
--port={number}.
File test/simple/helper-debugger-repl.js was extracted
from test/simple/test-debugger-repl.js
Fixed a bug in debugger repl where `restart` command did not work
when a custom debug port was specified via command-line option
--port={number}.
File test/simple/helper-debugger-repl.js was extracted
from test/simple/test-debugger-repl.js
Errors in leaf child processes weren't picked up by the test runner
because they didn't get bubbled up to the main process. Don't forcibly
kill the child processes; tell them to quit gracefully, then inspect
their exit codes.
This change introduces support for the common PREFIX variable in the
Makefile and install.py, instead of having /usr/local hardcoded. This
makes it much easier to install node to custom locations e.g. in a
user's home directory.
The PREFIX variable defaults to /usr/local.
The uname function can return any non-negative int to indicate success.
Strange, but that's how it is documented. This also fixes a similar
buffer overflow in the even more unlikely event that info.release is
> 255 characters, similar to how 78c5de5 did for info.sysname.
Fixes#3740
In the case of pipelined requests, you can have a situation where
the socket gets destroyed via one req/res object, but then trying
to destroy *another* req/res on the same socket will cause it to
call undefined.destroy(), since it was already removed from that
message.
Add a guard to OutgoingMessage.destroy and IncomingMessage.destroy
to prevent this error.
Fixes#3740
In the case of pipelined requests, you can have a situation where
the socket gets destroyed via one req/res object, but then trying
to destroy *another* req/res on the same socket will cause it to
call undefined.destroy(), since it was already removed from that
message.
Add a guard to OutgoingMessage.destroy and IncomingMessage.destroy
to prevent this error.
It needs to apply the Transform class when the _readableState,
_writableState, or _transformState properties are accessed,
otherwise things like setEncoding and on('data') don't work
properly.
Also, the methods wrappers are no longer needed, since they're only
problematic because they access the undefined properties.
Clean up and DRY the cluster source code. Fix a few bugs while we're
here:
* Short-lived handles in long-lived worker processes were never
reclaimed, resulting in resource leaks.
* Handles in the master process are now closed when the last worker
that holds a reference to them quits. Previously, they were only
closed at cluster shutdown.
* The cluster object no longer exposes functions/properties that are
only valid in the 'other' process, e.g. cluster.fork() is no longer
exported in worker processes.
So much goodness and still manages to reduce the line count from 590
to 320.
An absolute path will always open the same location regardless of your
current working directory. For posix, this just means path.charAt(0) ===
'/', but on Windows it's a little more complicated.
Fixesjoyent/node#5299.
V8 was upgraded to 3.18 in commit 9f68226. The knobs that control the
ARM build have changed in a number of ways. This commit patches the
configure script to reflect that. Should fix the Raspberry Pi build.
Fixes#5329.
4716dc6 made assert.equal() and related functions work better by
generating a better toString() from the expected, actual, and operator
values passed to fail(). Unfortunately, this was accomplished by putting
the generated message into the error's `name` property. When you passed
in a custom error message, the error would put the custom error into
`name` *and* `message`, resulting in helpful string representations like
"AssertionError: Oh no: Oh no".
This commit resolves that issue by storing the generated message in the
`message` property while leaving the error's name alone and adding
a regression test so that this doesn't pop back up later.
Closes#5292.
I broke dgram.Socket#bind(port, cb) almost a year ago in 332fea5a but
it wasn't until today that someone complained and none of the tests
caught it because they all either specify the address or omit the
callback.
Anyway, now it works again and does what you expect: it binds the
socket to the "any" address ("0.0.0.0" for IPv4 and "::" for IPv6.)
process.stdout isn't fully initialized yet by the time the test starts
when invoked with `python tools/test.py`. Use process.stdin instead and
force initialization with process.stdin.resume().
Fix a NULL pointer dereference in src/handle_wrap.cc which is really a
use-after-close bug.
The test checks that unref() after close() works on process.stdout but
this bug affects everything that derives from HandleWrap. I discovered
it because child processes would sometimes quit for no reason (that is,
no reason until I turned on core dumps.)
When LD_LIBRARY_PATH is overriden for custom builds we need to preserve
it for child processes. To be sure we preserve whole environment of
parent process and just add TEST_INIT variable to it.
When LD_LIBRARY_PATH is overriden for custom builds we need to preserve
it for forked process. There are possibly other environment variables
that could cause test failures so we preserve whole environment of
parent process.
Fix a (rather academic) buffer overflow. MAXHOSTNAMELEN is 256 on most
platforms, which means the buffer wasn't big enough to hold the
trailing nul byte on a system with a maximum length hostname.
Make http.request() and friends escape unsafe characters in the request
path. That is, a request for '/foo bar' is now escaped as '/foo%20bar'.
Before this commit, the path was used as-is in the request status line,
creating an invalid HTTP request ("GET /foo bar HTTP/1.1").
Fixes#4381.
Fix#5272
The consumption of a readable stream is a dance with 3 partners.
1. The specific stream Author (A)
2. The Stream Base class (B), and
3. The Consumer of the stream (C)
When B calls the _read() method that A implements, it sets a 'reading'
flag, so that parallel calls to _read() can be avoided. When A calls
stream.push(), B knows that it's safe to start calling _read() again.
If the consumer C is some kind of parser that wants in some cases to
pass the source stream off to some other party, but not before "putting
back" some bit of previously consumed data (as in the case of Node's
websocket http upgrade implementation). So, stream.unshift() will
generally *never* be called by A, but *only* called by C.
Prior to this patch, stream.unshift() *also* unset the state.reading
flag, meaning that C could indicate the end of a read, and B would
dutifully fire off another _read() call to A. This is inappropriate.
In the case of fs streams, and other variably-laggy streams that don't
tolerate overlapped _read() calls, this causes big problems.
Also, calling stream.shift() after the 'end' event did not raise any
kind of error, but would cause very strange behavior indeed. Calling it
after the EOF chunk was seen, but before the 'end' event was fired would
also cause weird behavior, and could lead to data being lost, since it
would not emit another 'readable' event.
This change makes it so that:
1. stream.unshift() does *not* set state.reading = false
2. stream.unshift() is allowed up until the 'end' event.
3. unshifting onto a EOF-encountered and zero-length (but not yet
end-emitted) stream will defer the 'end' event until the new data is
consumed.
4. pushing onto a EOF-encountered stream is now an error.
So, if you read(), you have that single tick to safely unshift() data
back into the stream, even if the null chunk was pushed, and the length
was 0.
Don't scan the whole string for a "NODE_" substring, just check that
the string starts with the expected prefix.
This is a reprise of dbbfbe7 but this time for the child_process
module.
Don't scan the whole string for a "NODE_CLUSTER_" substring, just check
that the string starts with the expected prefix. The linear scan was
causing a noticeable (but unsurprising) slowdown on messages with a
large .cmd string property.
Call SetPointerInInternalField(0, NULL) rather than
SetInternalField(0, Undefined()).
Fixes the following spurious NULL pointer dereference in debug builds:
#0 0x03ad2821 in v8::internal::FixedArrayBase::length ()
#1 0x03ad1dfc in v8::internal::FixedArray::get ()
#2 0x03ae05dd in v8::internal::Context::global_object ()
#3 0x03b6b87d in v8::internal::Context::builtins ()
#4 0x03ae1871 in v8::internal::Isolate::js_builtins_object ()
#5 0x03ab4fab in v8::CallV8HeapFunction ()
#6 0x03ab4d4a in v8::Value::Equals ()
#7 0x03b4f38b in CheckEqualsHelper ()
#8 0x03ac0f4b in v8::Object::SetInternalField ()
#9 0x06a99ddd in node::ObjectWrap::~ObjectWrap ()
#10 0x06a8b051 in node::Buffer::~Buffer ()
#11 0x06a8afbb in node::Buffer::~Buffer ()
#12 0x06a8af5e in node::Buffer::~Buffer ()
#13 0x06a9e569 in node::ObjectWrap::WeakCallback ()
We should go to next buffer if *current* one is full, not the next one.
Otherwise we may hop through buffers and written data will become
interleaved, which will lead to failure.
This change shouldn't have landed in the stable branch. It's a feature,
not a bug fix.
This reverts commit 58f93ffc4a.
This reverts commit 8c8ebe49b6.
This reverts commit ba0f7b8066.
This reverts commit 21f3c5c367.
Buffer.byteLength() works only for string inputs. Thus, when connection
has pending Buffer to write, it should just use it's length instead of
throwing exception.
Since 049903e, an end callback could be called before a write
callback if end() is called before the write is done. This patch
resolves the issue.
In collaboration with @gne
Fixesfelixge/node-formidable#209Fixes#5215
We were assuming that any string can be concatenated safely to
CRLF. However, for hex, base64, or binary encoded writes, this
is not the case, and results in sending the incorrect response.
An unusual edge case, but certainly a bug.
DH_compute_secret() may return key that is smaller than input buffer,
in such cases key should be left-padded because it is a BN (big number).
fix#5239
We should go to next buffer if *current* one is full, not the next one.
Otherwise we may hop through buffers and written data will become
interleaved, which will lead to failure.
On Linux, positional writes don't work when the file is opened in
append mode. The kernel ignores the position argument and always
appends the data to the end of the file.
To quote the man page:
POSIX requires that opening a file with the O_APPEND flag should have
no affect on the location at which pwrite() writes data. However, on
Linux, if a file is opened with O_APPEND, pwrite() appends data to the
end of the file, regardless of the value of offset.
RFC 6125 explicitly states that a client "MUST NOT seek a match
for a reference identifier of CN-ID if the presented identifiers
include a DNS-ID, SRV-ID, URI-ID, or any application-specific
identifier types supported by the client", but it MAY do so if
none of the mentioned identifier types (but others) are present.
Always define v8_postmortem_support, even if the platform does not
support it. Commit d8852aa adds a rule that references it in node.gyp.
Fixes the Windows build.
The DTrace probes were updated to accomodate platforms that can't
handle structs, update the prototypes for ETW but it's not necessary
to do anything with the new arguments as it's redundant information.
OSX and other DTrace implementations don't support dereferencing
structs in probes. To accomodate that pass members from the struct as
arguments so that DTrace is useful on those systems.
If an http response has an 'end' handler that throws, then the socket
will never be released back into the pool.
Granted, we do NOT guarantee that throwing will never have adverse
effects on Node internal state. Such a guarantee cannot be reasonably
made in a shared-global mutable-state side-effecty language like
JavaScript. However, in this case, it's a rather trivial patch to
increase our resilience a little bit, so it seems like a win.
There is no semantic change in this case, except that some event
listeners are removed, and the `'free'` event is emitted on nextTick, so
that you can schedule another request which will re-use the same socket.
From the user's point of view, there should be no detectable difference.
Closes#5107
The tests did not agree with the test comments. Tests first and second
were both testing the !state.reading case. Now second tests the
state.reading && state.length case.
Fixesjoyent/node#5183
The v0.8 Stream.pipe() method automatically destroyed the destination
stream whenever the src stream closed. However, this caused a lot of
problems, and was removed by popular demand. (Many userland modules
still have a no-op destroy() method just because of this.) It was also
very hazardous because this would be done even if { end: false } was
passed in the pipe options.
In v0.10, we decided that the 'close' event and destroy() method are
application-specific, and pipe() doesn't automatically call destroy().
However, TLS actually depended (silently) on this behavior. So, in this
case, we should just go ahead and destroy the thing when close happens.
Closes#5145
The DTrace probes were updated to accomodate platforms that can't
handle structs, update the prototypes for ETW but it's not necessary
to do anything with the new arguments as it's redundant information.
Expand the JSON representation of Buffer to include type information
so that it can be deserialized in JSON.parse() without context.
Fixes#5110.
Fixes#5143.
OSX and other DTrace implementations don't support dereferencing
structs in probes. To accomodate that pass members from the struct as
arguments so that DTrace is useful on those systems.
Pass the Isolate to Persistent<Function>::New(). Fixes the following
warning:
../../src/node.cc: In function ‘v8::Handle<v8::Value>
node::UsingDomains(const v8::Arguments&)’:
../../src/node.cc:921: warning: ‘New’ is deprecated
declared at ../../deps/v8/include/v8.h:4438)
In cases where a stream may have data added to the read queue before the
user adds a 'readable' event, there is never any indication that it's
time to start reading.
True, there's already data there, which the user would get if they
checked However, as we use 'readable' event listening as the signal to
start the flow of data with a read(0) call internally, we ought to
trigger the same effect (ie, emitting a 'readable' event) even if the
'readable' listener is added after the first emission.
To avoid confusing weirdness, only the *first* 'readable' event listener
is granted this privileged status. After we've started the flow (or,
alerted the consumer that the flow has started) we don't need to start
it again. At that point, it's the consumer's responsibility to consume
the stream.
Closes#5141
Have the formatter filter out vt100 color codes when calculating the
line width. Stops it from unnecessarily splitting strings over multiple
lines.
Fixes#5039.
A llvm/clang bug on Darwin ia32 makes these tests fail 100% of
the time. Since no one really seems to mind overly much, and we
can't reasonably fix this in node anyway, just accept both types
of NaN for now.
Calling `this.pair.encrypted._internallyPendingBytes()` before
handling/resetting error will result in assertion failure:
../src/node_crypto.cc:962: void node::crypto::Connection::ClearError():
Assertion `handle_->Get(String::New("error"))->BooleanValue() == false'
failed.
see #5058
Microsoft's IIS doesn't support it, and is not replying with ServerHello
after receiving ClientHello which contains it.
The good way might be allowing to opt-out this at runtime from
javascript-land, but unfortunately OpenSSL doesn't support it right now.
see #5119
Since _tickCallback and _tickDomainCallback were both called from
MakeCallback, it was possible for a callback to be called that required
a domain directly to _tickCallback.
The fix was to implement process.usingDomains(). This will set all
applicable functions to their domain counterparts, and set a flag in cc
to let MakeCallback know domain callbacks always need to be checked.
Added test in own file. It's important that the test remains isolated.
_charsWritten is an internal property that was constantly written to,
but never read from. So it has been removed.
Removed documentation reference as well.
Add the `sessionTimeout` integral value to the list of options
recognized by `tls.createServer`.
This option will be useful for applications which need frequently
establish short-lived TLS connections to the same endpoint. The TLS
tickets RFC is an ideal option to reduce the socket setup overhead
for such scenarios, but the default ticket timeout value (5
minutes) is too low to be useful.
It's possible to read multiple messages off the parent/child channel.
When that happens, make sure that recvHandle is cleared after emitting
the first message so it doesn't get emitted twice.
Commit f53441a added crypto.getCiphers() as a function that returns the
names of SSL ciphers.
Commit 14a6c4e then added crypto.getHashes(), which returns the names of
digest algorithms, but that creates a subtle inconsistency: the return
values of crypto.getHashes() are valid arguments to crypto.createHash()
but that is not true for crypto.getCiphers() - the returned values are
only valid for SSL/TLS functions.
Rectify that by adding tls.getCiphers() and making crypto.getCiphers()
return proper cipher names.
In process#send() and child_process.ChildProcess#send(), use 'utf8' as
the encoding instead of 'ascii' because 'ascii' mutilates non-ASCII
input. Correctly handle partial character sequences by introducing
a StringDecoder.
Sending over UTF-8 no longer works in v0.10 because the high bit of
each byte is now cleared when converting a Buffer to ASCII. See
commit 96a314b for details.
Fixes#4999 and #5011.
Commit 8632af3 ("tools: update gyp to r1601") broke the Windows build.
Older versions of GYP link to kernel32.lib, user32.lib, etc. but that
was changed in r1584. See https://codereview.chromium.org/12256017
Fix the build by explicitly linking to the required libraries.
While libuv supports reporting subsecond stat resolution across
platforms, to actually get that resolution your platform and filesystem
must support it (not HFS, ext[23], fat), otherwise the nsecs are 0
The EncIn, EncOut, ClearIn & ClearOut functions are victims of some code
copy + pasting. A common line copied to all of them is:
`if (off >= buffer_length) { ...`
448e0f43 corrected ClearIn's check from `>=` to `>`, but left the others
unchanged (with an incorrect bounds check). However, if you look down at
the next very next bounds check you'll see:
`if (off + len > buffer_length) { ...`
So the check is actually obviated by the next line, and should be
removed.
This fixes an issue where writing a zero-length buffer to an encrypted
pair's *encrypted* stream you would get a crash.
The EncIn, EncOut, ClearIn & ClearOut functions are victims of some code
copy + pasting. A common line copied to all of them is:
`if (off >= buffer_length) { ...`
448e0f43 corrected ClearIn's check from `>=` to `>`, but left the others
unchanged (with an incorrect bounds check). However, if you look down at
the next very next bounds check you'll see:
`if (off + len > buffer_length) { ...`
So the check is actually obviated by the next line, and should be
removed.
This fixes an issue where writing a zero-length buffer to an encrypted
pair's *encrypted* stream you would get a crash.
Increase the number of bits by 1 by making Flags unsigned.
BUG=chromium:211741
Review URL: https://chromiumcodereview.appspot.com/12886008
This is a back-port of commits 13964 and 13988 addressing CVE-2013-2632.
Throw a TypeError if size > 0x3fffffff. Avoids the following V8 fatal
error:
FATAL ERROR: v8::Object::SetIndexedPropertiesToExternalArrayData()
length exceeds max acceptable value
Fixes#5126.
The stall is exposed in the test, though the test itself asserts before
it stalls.
The test is constructed to replicate the stalling state of a complex
Passthrough usecase since I was not able to reliable trigger the stall.
Some of the preconditions for triggering the stall are:
* rs.length >= rs.highWaterMark
* !rs.needReadable
* _transform() handler that can return empty transforms
* multiple sync write() calls
Combined this can trigger a case where rs.reading is not cleared when
further progress requires this. The fix is to always clear rs.reading.
Before this patch calling `socket.setTimeout(0xffffffff)` will result in
signed int32 overflow in C++ which resulted in assertion error:
Assertion failed: (timeout >= -1), function uv__io_poll, file
../deps/uv/src/unix/kqueue.c, line 121.
see #5101
Since WriteBuffer has been replaced with WriteOneByte, writing ascii
will no longer automatically convert 0x0 to 0x20. So removed mention of
this special case from docs.
This is not a great fix, and it's a bug that's very tricky to reproduce.
Occasionally, while downloading a file, especially on Linux for some
reason, the pause/resume timing will be just right such that the
CryptoStream is in a 'reading' state, but actually has no data, so it
ought to pull more in. Because there's no reads happening, it just sits
there, and the process will exit
This is, fundamentally, a factor of how the HTTP implementation sits
atop CryptoStreams and TCP Socket objects, which is utterly horrible,
and needs to be rewritten. However, in the meantime, npm downloads are
prematurely exiting, causing hard-to-debug "cb() never called!" errors.
The benchmark compare would drop the last run of the binary pairs. So
when they were only run once an error would arise because no data was
generated for the second binary.
Every constant is certainly 4 bytes now, but freebsd's objdump utility
prints out odd byte sequences (5-bytes, 6-bytes and even 9-bytes long)
for v8's data section. We can safely ignore all upper bytes, because all
constants that we're using are just `int`s. Since on all supported
platforms `int` is 32bit long (and anyway v8's constants are 32bit too),
we ignore all higher bits if they were read.
All compile time warnings about using deprecated APIs have been
suppressed by updating node's API. Though there are still many function
calls that can accept Isolate, and still need to be updated.
node_isolate had to be added as an extern variable in node.h and
node_object_wrap.h
Also a couple small fixes for Error handling.
Before v8 3.16.6 the error stack message was lazily written when it was
needed, which allowed you to change the message after instantiation.
Then the stack would be written with the new message the first time it
was accessed. Though that has changed. Now it creates the stack message
on instantiation. So setting a different message afterwards won't be
displayed.
This is not a complete fix for the problem. Getting error without any
message isn't very useful.
This reverts commit ea1cba6246.
The offending commit was intended to land on the v0.8 branch only, but
it accidentally got merged at some point.
Closes#5054.
Fixes#5071, #5073.
* Normalize capitalization of drive letter
* Fix `exit()` typo in failure path
* Ignore symlink tests (Windows) if not elevated
The `test_relative_input_cwd()` test was failing on Windows when
`skipSymlinks` was `true`. So we won't run it if `skipSymlinks` is
`true`.
When it failed, the unhandled error caused Node to die before
having a chance to clean up, which resulted in two files missing
in subsequent unit tests:
* `test/fixtures/nested-index/one/hello.js`
* `test/fixtures/nested-index/one/index.js`
We should probably find a way to isolate this test from the other
test (`simple/test-module-loading`) that was failing when this test
poluted the disk state.
Looks like a merge conflict in 77ed12f left in the old, unconditional
install rule. Remove it, the new and improved rule is a few lines down.
Fixes#5044.
Also, set paused=false *before* calling resume(). Otherwise,
there's an edge case where an immediately-emitted chunk might make
it call pause() again incorrectly.
The benefits of the hot-path optimization below start to fall off when
the buffer size gets up near 128KB, because the cost of the copy is more
than the cost of the extra write() call. Switch to the write/end method
at that point.
Heuristics and magic numbers are awful, but slow http responses are
worse.
Fix#4975
Consider this example:
// fd 3 is a bound tcp socket
var s = net.createServer(cb);
s.listen({ fd: 3 });
console.log(s.address()); // prints null
This commit makes net.Server#address() print the actual address.
Ditto for non-listen sockets; properties like net.Socket#localAddress
and net.Socket#remoteAddress now return the correct value.
Fixes#5009.
Commit a804347 makes fs function rethrow errors when the callback is
omitted. While the right thing to do, it's a change from the old v0.8
behavior where such errors were silently ignored.
To give users time to upgrade, temporarily disable that and replace it
with a function that warns once about the deprecated behavior.
Close#5005
From OpenSSL's documentation:
"If BIO_free() is called on a BIO chain it will only free one BIO
resulting in a memory leak."
and
"BIO_free_all() frees up an entire BIO chain, it does not halt if an
error occurs freeing up an individual BIO in the chain"
This solves the problem of calling `readable.pipe(writable)` after the
readable stream has already emitted 'end', as often is the case when
writing simple HTTP proxies.
The spirit of streams2 is that things will work properly, even if you
don't set them up right away on the first tick.
This approach breaks down, however, because pipe()ing from an ended
readable will just do nothing. No more data will ever arrive, and the
writable will hang open forever never being ended.
However, that does not solve the case of adding a `on('end')` listener
after the stream has received the EOF chunk, if it was the first chunk
received (and thus, length was 0, and 'end' got emitted). So, with
this, we defer the 'end' event emission until the read() function is
called.
Also, in pipe(), if the source has emitted 'end' already, we call the
cleanup/onend function on nextTick. Piping from an already-ended stream
is thus the same as piping from a stream that is in the process of
ending.
Updates many tests that were relying on 'end' coming immediately, even
though they never read() from the req.
Fix#4942
In the function that pre-emptively fills the Readable queue, it relies
on a recursion through:
stream.push(chunk) ->
maybeReadMore(stream, state) ->
if (not reading more and < hwm) stream.read(0) ->
stream._read() ->
stream.push(chunk) -> repeat.
Since this was only calling read() a single time, and then relying on a
future nextTick to collect more data, it ends up causing a nextTick
recursion error (and potentially a RangeError, even) if you have a very
high highWaterMark, and are getting very small chunks pushed
synchronously in _read (as happens with TLS, or many simple test
streams).
This change implements a new approach, so that read(0) is called
repeatedly as long as it is effective (that is, the length keeps
increasing), and thus quickly fills up the buffer for streams such as
these, without any stacks overflowing.
so `ee.emit('error')` doesn't throw when domains are active
create an empty error only when handled by a domain
test for when no error is provided to an error event
Fix#4948
This adds a check before setting the incoming parser
to null. Under certain circumstances it'll already be set to
null by freeParser().
Otherwise this will cause node to crash as it tries to set
null on something that is already null.
When calling setImmediate with extra arguments the this keyword in the
callback would refer to the global object, but when not calling
setImmediate with extra arguments this would refer to the returned
handle object.
This commit fixes that inconsistency so its always set handle object.
The handle object was chosen for performance reasons.
Also, this seems to occasionally cause some annoying file-locking
errors in Windows. Not sure if this is the best fix, but it seems
to make the warnings go away in that spot.
If you call z.flush();z.write('foo'); then it would try to write 'foo'
before the flush was done, triggering an assertion in the zlib binding.
Closes#4950
Consider the following example:
console.log(Buffer('ú').toString('ascii'));
Before this commit, the contents of the buffer was used as-is and hence it
prints 'ú'.
Now, it prints 'C:'. Perhaps not much of an improvement but it conforms to what
the documentation says it does: strip off the high bits.
Fixes#4371.
Fix#4948
This adds a check before setting the incoming parser
to null. Under certain circumstances it'll already be set to
null by freeParser().
Otherwise this will cause node to crash as it tries to set
null on something that is already null.
There are no unsafe structured exception handlers in object files
generated from hand-crafted assembly - because they contain no exception
handlers at all.
child.send can send net servers and sockets. Now that we have support
for dgram clusters this functionality should be extended to include
dgram sockets.
* stream: Allow strings in Readable.push/unshift (isaacs)
* stream: Remove bufferSize option (isaacs)
* stream: Increase highWaterMark on large reads (isaacs)
* stream: _write: takes an encoding argument (isaacs)
* stream: _transform: remove no output() method, provide encoding (isaacs)
* stream: Don't require read(0) to emit 'readable' event (isaacs)
* node: Add --throw-deprecation (isaacs)
* http: fix multiple timeout events (Eugene Girshov)
* http: More useful setTimeout API on server (isaacs)
* net: use close callback, not process.nextTick (Ben Noordhuis)
* net: Provide better error when writing after FIN (isaacs)
* dns: Support NAPTR queries (Pavel Lang)
* dns: fix ReferenceError in resolve() error path (Xidorn Quan)
* child_process: handle ENOENT correctly on Windows (Scott Blomquist)
* cluster: Rename destroy() to kill(signal=SIGTERM) (isaacs)
* build: define nightly tag external to build system (Timothy J Fontaine)
* build: make msi build work when spaces are present in the path (Bert Belder)
* build: fix msi build issue with WiX 3.7/3.8 (Raymond Feng)
* repl: make compatible with domains (Dave Olszewski)
* events: Code cleanup and performance improvements (Trevor Norris)
This adds the following to HTTP:
* server.setTimeout(msecs, callback)
Sets all new connections to time out after the specified time, at
which point it emits 'timeout' on the server, passing the socket as an
argument.
In this way, timeouts can be handled in one place consistently.
* req.setTimeout(), res.setTimeout()
Essentially an alias to req/res.socket.setTimeout(), but without
having to delve into a "buried" object. Adds a listener on the
req/res object, but not on the socket.
* server.timeout
Number of milliseconds before incoming connections time out.
(Default=1000*60*2, as before.)
Furthermore, if the user sets up their own timeout listener on either
the server, the request, or the response, then the default behavior
(destroying the socket) is suppressed.
Fix#3460
This will run the benchmarks the number of times specified by NODE_BENCH_RUNS,
to attempt to reduce variability.
If the number of runs is high enough, it'll also throw out the top and bottom
quartiles, since that's where the outliers will be.
It's not very fancy statistics-fu, but it's better than nothing.
Also, linted this file. It had tabs in it. TABS!
Now that highWaterMark increases when there are large reads, this
greatly reduces the number of calls necessary to _read(size), assuming
that _read actually respects the size argument.
Don't emit the 'close' event with process.nextTick.
Closing a handle is an operation that usually *but not always* completes
on the next tick of the event loop, hence using process.nextTick is not
reliable.
Use a proper handle close callback and emit the 'close' event from
inside the callback.
Update tests that depend on the intricacies of the old model.
Fixes#3459.
1. Get rid of unnecessary 'finishing' flag
2. Dont check both ending and ended. Extraneous.
Also: Remove extraneous 'finishing' flag, and don't check both 'ending'
and 'ended', since checking just 'ending' is sufficient.
There are no unsafe structured exception handlers in object files
generated from hand-crafted assembly - because they contain no exception
handlers at all.
This commit fixes a bug where the cluster module fails to propagate
EADDRINUSE errors.
When a worker starts a (net, http) server, it requests the listen socket
from its master who then creates and binds the socket.
Now, OS X and Windows don't always signal EADDRINUSE from bind() but
instead defer the error until a later syscall. libuv mimics this
behaviour to provide consistent behaviour across platforms but that
means the worker could end up with a socket that is not actually bound
to the requested addresss.
That's why the worker now checks if the socket is bound, raising
EADDRINUSE if that's not the case.
Fixes#2721.
Strict checking for typeof types broke backwards compatibility for other
libraries. This reverts those checks.
The subclass test has been changed to ensure all operations can be
performed on the inherited EE before instantiation. Including the
ability to set event names with numbers.
When a readable listener is added, call read(0) so that data will flow in, up to
the high water mark.
Otherwise, it's somewhat confusing that you have to listen for readable,
and ALSO call read() (when it will certainly return null) just to get some
data out of the stream.
See: #4720
A typo in the variable name makes it throw a ReferenceError instead of
the expected "Unknown type" error when dns.resolve() is passed a bad
record type argument.
Fixes the following exception:
ReferenceError: type is not defined
at Object.exports.resolve (dns.js:189:40)
at /Users/bnoordhuis/src/master/test/simple/test-c-ares.js:48:9
<snip>
Calling end(data) calls write(data). Doing this after end should
raise a 'write after end' error.
However, because end() calls were previously ignored on already
ended streams, this error was confusingly suppressed, even though the
data never is written, and cannot get to the other side.
This is a re-hash of 5222d19a11, but
without assuming that the data passed to end() is valid, and thus
breaking a bunch of tests.
The try/catch in repl.js keeps any active domain from catching the
error. Since the domain may not even be enterd until the code is run,
it's not possible to avoid the try/catch, so emit on the domain when an
error is thrown.
Calling end(data) calls write(data). Doing this after end should
raise a 'write after end' error.
However, because end() calls were previously ignored on already
ended streams, this error was confusingly suppressed, even though the
data never is written, and cannot get to the other side.
The stock writable stream "write after end" message is overly vague, if
you have clearly not called end() yourself yet.
When we receive a FIN from the other side, and call destroySoon() as a
result, then generate an EPIPE error (which is what would happen if you
did actually write to the socket), with a message explaining what
actually happened.
By making sure the _events is always an object there is one less check
that needs to be performed by emit.
Use undefined instead of null. typeof checks are a lot faster than
isArray.
There are a few places where the this._events check cannot be removed
because it is possible for the user to call those methods after using
utils.extend to create their own EventEmitter, but before it has
actually been instantiated.
Unnecessary checks were being performed on if the event existed before
being removed.
_events starts out as null, so reset to null when emptied.
Checking typeof is a lot cheaper than isArray().
Ability to return just the length of listeners for a given type, using
EventEmitter.listenerCount(emitter, event). This will be a lot cheaper
than creating a copy of the listeners array just to check its length.
We were using a global temp file while setting the NODE_VERSION
environment variable. This resulted in simultaneous builds swapping
version numbers on occasion.
This patch removes the use of a temp file for this.
Register the 'close' event listener with .once(), not .on().
It doesn't matter in the grand scheme of things because the listener
doesn't keep references to any heavy-weight objects but using .once()
for a oneshot listener is something of a best practice.
The first example uses Readable, and shows the use of
readable.unshift(). The second uses the Transform class, showing that
it's much simpler in this case.
This makes it so that `stream.push(chunk)` is the only way to signal the
end of reading, removing the confusing disparity between the
callback-style _read method, and the fact that most real-world streams
do not have a 1:1 corollation between the "please give me data" event,
and the actual arrival of a chunk of data.
It is still possible, of course, to implement a `CallbackReadable` on
top of this. Simply provide a method like this as the callback:
function readCallback(er, chunk) {
if (er)
stream.emit('error', er);
else
stream.push(chunk);
}
However, *only* fs streams actually would behave in this way, so it
makes not a lot of sense to make TCP, TLS, HTTP, and all the rest have
to bend into this uncomfortable paradigm.
A primary motivation of this is to make the onread function more
inline-friendly, but also to make it more easy to explore not having
onread at all, in favor of always using push() to signal the end of
reading.
Don't emit a 'connect' event on sockets that are handed off to
net.Server 'connection' event listeners.
1. It's superfluous because the connection has already been established
at that point.
2. The implementation is arguably wrong because the event is emitted on
the same tick of the event loop while the rule of thumb is to always
emit it on the next one.
This has been tried before in commit f0a440d but was reverted again in
ede1acc because the change was incomplete (at least one test hadn't
been updated).
Fixes#1047 (again).
The output of `id -G` is unreliable on OS X. It uses an undocumented
Libsystem function called getgrouplist_2() that includes some auxiliary
groups that the POSIX getgroups() function does not return.
Or rather, not always. It leads to fun bug chases where the test fails
in one terminal but not in another.
Turn off safe exception handlers, they're incompatible with how
openssl is compiled / linked under MSVS 2012.
Addresses the following build error:
openssl.lib(x86cpuid.obj) : error LNK2026: module unsafe for SAFESEH
image. [g:\jenkins\workspace\nodejs-oneoff\node.vcxproj]
openssl.lib(x86.obj) : error LNK2026: module unsafe for SAFESEH
image. [g:\jenkins\workspace\nodejs-oneoff\node.vcxproj]
# etc. etc.
g:\jenkins\workspace\nodejs-oneoff\Release\node.exe : fatal error
LNK1281: Unable to generate SAFESEH image.
[g:\jenkins\workspace\nodejs-oneoff\node.vcxproj]
Fixes#4242.
Document how to run the example on the home page in more detail.
Apparently our Windows brethren are prone to double-clicking on the
binary instead of running it from the command line.
Fixes#4854.
It's cleaner to only load domain ticker logic when the domains are being
used. This makes execution slightly quicker in both cases, and simpler
from the spinner since there is no need to check if the latest callback
requires use of domains.
Not necessary, since we can handle the error properly on the first tick
now, even if there are event listeners, etc.
Additionally, this removes the unnecessary "_needTickCallback" from
startup, since Module.loadMain() will kick off a nextTick callback right
after it runs the main module.
Fix#4856
Clear OpenSSL's error stack on return from Connection::HandleSSLError().
This stops stale errors from popping up later in the lifecycle of the
SSL connection where they would cause spurious failures.
This commit causes a 1-2% performance regression on `make bench-tls`.
We'll address that in follow-up commits if possible but let's ensure
correctness first.
Fixes#4771.
This handles the fact that stream.Writable inherits from the Stream class,
meaning that it has the legacy pipe() method. Override that with a pipe()
method that emits an error.
Ensure that Duplex streams ARE still pipe()able, however.
Since the 'readable' flag on streams is sometimes temporary, it's probably
better not to put too much weight on that. But if something is an instanceof
Writable, rather than of Readable or Duplex, then it's safe to say that
reading from it is the wrong thing to do.
Fix#3647
It is not a valid test unless you're connected to the internet, and causes
a lot of spurious failures on Linux anyway, as it's highly dependent on
timing of things that we don't have any control over.
This makes the output of simple/test-debugger-repl and
simle/test-debugger-repl-utf8 mirror an actual debugger session, so it's
a bit easier to reason about.
Also, it uses the same code for both, and fixes it so that it doesn't
leave zombie processes lying around when it crashes.
Run 1000 times without any failures or zombies.
Starting the debugger directly in the SIGUSR1 signal handler results in
a malloc lock contention ~1% of the time. It hangs the test, which is
annoying on a daily basis to all of us, but it also is pretty terrible
if you actually want to debug a node process that has gone sideways.
Credit to @bnoordhuis for most of this. I just added the unref which
keeps it from messing up the event loop for other stuff.
The CI system requires that some environment variables are set so merge
our variables into the current environment instead of blindly replacing
it.
This will probably have to be repeated for other tests. C'est la vie.
Commit 3d67f89 ("fix generation of v8 constants on freebsd") is an
unfortunate victim of this rollback.
Revert "dtrace: fix generation of v8 constants on freebsd"
Revert "dtrace: More style"
Revert "dtrace: Make D style more D-ish"
Revert "dtrace: x64 ustack helper"
Revert "dtrace: fix style in ustack helper"
Revert "dtrace: SeqAsciiString was renamed to SeqOneByteString in v8"
This reverts commit 3d67f89552.
This reverts commit 321b8eec08.
This reverts commit 38df9d51a2.
This reverts commit f9afb3f010.
This reverts commit 13296e4b13.
This reverts commit 3b715edda9.
Reapply floating patches. Special mention: also reapplies 017009f but
with the extra change of removing DescriptorArray::kTransitionsIndex
from the postmortem metadata generator because said field no longer
exists in V8 3.14.
* http: Do not free the wrong parser on socket close (isaacs)
* http: Handle hangup writes more gently (isaacs)
* zlib: fix assert on bad input (Ben Noordhuis)
* test: add TAP output to the test runner (Timothy J Fontaine)
* unix: Handle EINPROGRESS from domain sockets (Ben Noordhuis)
This appears to fix#4673. That bug is very hard to reproduce, so it's
hard to tell for certain, but this approach is more correct anyway.
Hat-tip: @dougwilson
The Readable and Writable classes will nextTick certain things
if in sync mode. The sync flag gets unset after a call to _read
or _write. However, most of these behaviors should also be
deferred until nextTick if no reads have been made (for example,
the automatic '_read up to hwm' behavior on Readable.push(chunk))
Set the sync flag to true in the constructor, so that it will not
trigger an immediate 'readable' event, call to _read, before the
user has had a chance to set a _read method implementation.
Commit 9901b69c introduces a small regression where the trailing base64
padding is no longer written out when Cipher#final is called. Rectify
that.
Fixes#4837.
There are cases where a push() call would return true, even though
the thing being pushed was in fact way way larger than the high
water mark, simply because the 'needReadable' was already set, and
would not get unset until nextTick.
In some cases, this could lead to an infinite loop of pushing data
into the buffer, never getting to the 'readable' event which would
unset the needReadable flag.
Fix by splitting up the emitReadable function, so that it always
sets the flag on this tick, even if it defers until nextTick to
actually emit the event.
Also, if we're not ending or already in the process of reading, it
now calls read(0) if we're below the high water mark. Thus, the
highWaterMark value is the intended amount to buffer up to, and it
is smarter about hitting the target.
It seems like a good idea on the face of it, but lowWaterMarks are
actually not useful, and in practice should always be set to zero.
It would be worthwhile for writers if we actually did some kind of
writev() type of thing, but actually this just delays calling write()
and the overhead of doing a bunch of Buffer copies is not worth the
slight benefit of calling write() fewer times.
The following test case occasionally triggered an assert because
write_in_progress_ didn't get cleared on error:
$ cat test.js
require('zlib').gunzip('BAM', console.log);
setTimeout(gc, 10);
$ while true; do node --expose-gc test.js || break; done
{ [Error: incorrect header check] errno: -3, code: 'Z_DATA_ERROR' }
Assertion failed: (!write_in_progress_ && "write in progress"),
function Clear, file ../src/node_zlib.cc, line 71.
Abort trap: 6
Steps to avoid that:
* Initialize all primitive member fields in the constructor.
* Clear the write_in_progress_ member field in ZCtx::Error().
* Ref the ZCtx object as soon as write_in_progress_ is set to true.
Before this commit, it could get GC'ed in the time between setting
the field and the call to ctx->Ref().
Fixes#4783.
lib/path.js:
- throws a TypeError on the filter if the argument is not a string.
test/simple/test-path.js:
- removed the test to check if non-string types are filtered.
- added a test to check if path.join throws TypeError on arguments that
are not strings.
lib/http.js is using stream._handle.readStart/readStop to control
data-flow coming out from underlying stream. If this methods are not
present - data might be buffered regardless of whether it'll be read.
see #4657
Checks have been simplified and optimized for most-used cases.
Calling Buffer with another Buffer as the subject will now use the
SlowBuffer Copy method instead of the for loop.
No need to call for value coercion, just place the ternary inline.
ASN1_STRING_to_UTF8() passes an ASN1_STRING to ASN1_STRING_set() but forgot to
initialize the `length` field.
Fixes the following valgrind error:
$ valgrind -q --track-origins=yes --num-callers=19 \
out/Debug/node test/simple/test-tls-client-abort.js
==2690== Conditional jump or move depends on uninitialised value(s)
==2690== at 0x784B69: ASN1_STRING_set (asn1_lib.c:382)
==2690== by 0x809564: ASN1_mbstring_ncopy (a_mbstr.c:204)
==2690== by 0x8090F0: ASN1_mbstring_copy (a_mbstr.c:86)
==2690== by 0x782F1F: ASN1_STRING_to_UTF8 (a_strex.c:570)
==2690== by 0x78F090: asn1_string_canon (x_name.c:409)
==2690== by 0x78EF17: x509_name_canon (x_name.c:354)
==2690== by 0x78EA7D: x509_name_ex_d2i (x_name.c:210)
==2690== by 0x788058: ASN1_item_ex_d2i (tasn_dec.c:239)
==2690== by 0x7890D4: asn1_template_noexp_d2i (tasn_dec.c:746)
==2690== by 0x788CB6: asn1_template_ex_d2i (tasn_dec.c:607)
==2690== by 0x78877A: ASN1_item_ex_d2i (tasn_dec.c:448)
==2690== by 0x7890D4: asn1_template_noexp_d2i (tasn_dec.c:746)
==2690== by 0x788CB6: asn1_template_ex_d2i (tasn_dec.c:607)
==2690== by 0x78877A: ASN1_item_ex_d2i (tasn_dec.c:448)
==2690== by 0x787C93: ASN1_item_d2i (tasn_dec.c:136)
==2690== by 0x78F5E4: d2i_X509 (x_x509.c:141)
==2690== by 0x7C9B91: PEM_ASN1_read_bio (pem_oth.c:81)
==2690== by 0x7CA506: PEM_read_bio_X509 (pem_x509.c:67)
==2690== by 0x703C9A: node::crypto::SecureContext::AddRootCerts(v8::Arguments const&) (node_crypto.cc:497)
==2690== Uninitialised value was created by a stack allocation
==2690== at 0x782E89: ASN1_STRING_to_UTF8 (a_strex.c:560)
When perlasm generates MASM code it sets the assembler target to 468.
In this mode MASM refuses to assemble a couple of instructions. Bumping
the target to 686 solves this problem.
For throughput benchmarks, run with just 5s durations rather than 1s and 3s.
For startup benchmark, run with just a single 1s duration, since it's very
consistent anyway.
This increases fs.WriteStream throughput dramatically by removing the
"higher default water marks" for fs.WriteStream.
Also includes a benchmark. Current performance is significantly higher
than v0.8 for strings at all tested levels except size=1. Buffer
performance is still lackluster.
Further improvement in the stream.Writable base class is required, but
this is a start.
Using external memory values allows for quick communication between js
and cc land, so we can check if the js land callback needs to be run.
(this is where I meant that manually tracking nextTickQueue.length would
be helpful)
Also did some minor cleanup of removing the old Tick and
StartTickSpinner functions, and a few unneeded comments.
Conflicts:
src/node.cc
* Callbacks from spinner now calls its own function, separate from the
tickCallback logic
* MakeCallback will call a domain specific function if a domain is
detected
* _tickCallback assumes no domains, until nextTick receives a callback
with a domain. After that _tickCallback is overridden with the domain
specific implementation.
* _needTickCallback runs in startup() instead of nextTick (isaacs)
* Fix bug in _fatalException where exit would be called twice (isaacs)
* Process.domain has a default value of null
* Manually track nextTickQueue.length (will be useful later)
* Update tests to reflect internal api changes
This reverts commit 0109a9f90a.
Also included: Port all the changes to process._makeCallback into the
C++ version. Immediate nextTick, etc.
This yields a slight boost in several benchmarks. V8 is optimizing and
deoptimizing process._makeCallback repeatedly.
* npm: Upgrade to v1.2.11
* http: Do not let Agent hand out destroyed sockets (isaacs)
* http: Raise hangup error on destroyed socket write (isaacs)
* http: protect against response splitting attacks (Bert Belder)
Prior to v0.10, Node ignored ECONNRESET errors in many situations.
There *are* valid cases in which ECONNRESET should be ignored as a
normal part of the TCP dance, but in many others, it's a very relevant
signal that must be heeded with care.
Exacerbating this problem, if the OutgoingMessage does not have a
req.connection._handle, it assumes that it is in the process of
connecting, and thus buffers writes up in an array.
The problem happens when you reuse a socket between two requests, and it
is destroyed abruptly in between them. The writes will be buffered,
because the socket has no handle, but it's not ever going to GET a
handle, because it's not connecting, it's destroyed.
The proper fix is to treat ECONNRESET correctly. However, this is a
behavior/semantics change, and cannot land in a stable branch.
Fix#4775
Running repl.start without the prompt set produces this error:
repl.js:95
throw new Error('An options Object, or a prompt String are required');
^
Error: An options Object, or a prompt String are required
at new REPLServer (repl.js:95:11)
at Object.exports.start (repl.js:321:14)
at Object.<anonymous> (/Users/dan/Dropbox/Documents/dev/nextgen/repl_test.js:5:6)
at Module._compile (module.js:449:26)
at Object.Module._extensions..js (module.js:467:10)
at Module.load (module.js:356:32)
at Function.Module._load (module.js:312:12)
at Module.runMain (module.js:492:10)
at process.startup.processNextTick.process._tickCallback (node.js:244:9)
Expose the file descriptor as a read-only property on the internal
handle objects. Intended for debugging purposes, not part of the API
proper. The property is always null on Windows.
Fixes#4754.
Previously, we were only destroying sockets on end if their readable
side had already been ended. This causes a problem for non-readable
streams, since we don't expect to ever see an 'end' event from those.
Treat the lack of a 'readable' flag the same as if it was an ended
readable stream.
Fix#4751
node 0.9.6 introduced Buffer changes that cause the key argument of
Hmac::HmacInit (used in crypto.createHmac) to be NULL when the key is
empty. This argument is passed to OpenSSL's HMAC_Init, which does not
like NULL keys.
This change works around the issue by passing an empty string to
HMAC_Init when the key is empty, and adds crypto.createHmac tests for
the edge cases of empty keys and values.
This is causing the CryptoStreams to get into an awful state when
there is a tight loop calling connection.write(chunk) waiting for
a false return.
Because CryptoStreams use read(0) to cycle data, this was causing
the encrypted side to pull way too much data in from the cleartext
side, since the read(0) would make it always call _read.
The unfortunate side effect, fixed in the next patch, is that
CryptoStreams don't automatically cycle when the Socket drains.
Let ECONNRESET network errors bubble up so clients can detect them.
Commit c4454d2e suppressed and turned them into regular end-of-stream
events to fix the then-failing simple/test-regress-GH-1531 test. See
also issue #1571 for (scant) details.
It turns out that special handling is no longer necessary. Remove the
special casing and let the error bubble up naturally.
pummel/test-https-ci-reneg-attack and pummel/test-tls-ci-reneg-attack
are updated because they expected an EPIPE error code that is now an
ECONNRESET. Suppression of the ECONNRESET prevented the test from
detecting that the connection has been severed whereupon the next
write would fail with an EPIPE.
Fixes#1776.
Fix an exception that was raised when the WriteStream was closed
immediately after creating it:
TypeError: Cannot read property 'fd' of undefined
at WriteStream.close (fs.js:1537:18)
<snip>
Avoid the TypeError and make sure the file descriptor is closed.
Fixes#4745.
Don't run the 'has function been called?' checks if the test is exiting
with an error because a failed check will mask the real exception.
v0.8 doesn't have the _fatalException machinery in src/node.js and
src/node.cc so it doesn't have this issue.
Convert the Buffer to an ArrayBuffer. The typed_array.buffer property
should be an ArrayBuffer to avoid confusion: a Buffer doesn't have a
byteLength property and more importantly, its slice() method works
subtly different.
That means that before this commit:
var buf = new Buffer(1);
var arr = new Int8Array(buf);
assert.equal(arr.buffer, buf);
assert(arr.buffer instanceof Buffer);
And now:
var buf = new Buffer(1);
var arr = new Int8Array(buf);
assert.notEqual(arr.buffer, buf);
assert(arr.buffer instanceof ArrayBuffer);
Noteworthy installer improvements provided here:
* Support in the Installer UI for not installing shortcuts.
* Support in the Installer UI for choosing a custom install directory.
* Command line support for not installing shortcuts (ADDDEFAULT=nodejs)
* Command line support for custom install directory (INSTALLDIR=c:\tools\node)
http.ServerRequest and http.ClientResponse are merged into http.IncomingMessage
which has fields for both, and acts as a Readable Stream and EventEmitter.
Fixes#3851.
This is commit 01ee551, except for the DataView type this time.
Make the behavior of DataView consistent with that of typed arrays:
make a copy of the backing store.
Otherwise sockets that are 'finish'ed won't be unpiped and `writing to
ended stream` error will arise.
This might sound unrealistic, but it happens in net.js. When
`socket.allowHalfOpen === false`, EOF will cause `.destroySoon()` call which
ends the writable side of net.Socket.
Check that having a worker bind to a port that's already taken doesn't
leave the master process in a confused state. Releasing the port and
trying again should Just Work[TM].
Follow browser behavior, only share the backing store when it's a
ArrayBuffer. That is:
var abuf = new ArrayBuffer(32);
var a = new Int8Array(abuf);
var b = new Int8Array(abuf);
a[0] = 0;
b[0] = 1;
assert(a[0] === b[0]); // a and b share memory
But:
var a = new Int8Array(32);
var b = new Int8Array(a);
a[0] = 0;
b[0] = 1;
assert(a[0] !== b[0]); // a and b don't share memory
The typed arrays spec allows both `a[0] === b[0]` and `a[0] !=== b[0]`
but Chrome and Firefox implement the behavior where memory is not
shared.
Copying the memory is less efficient but let's do it anyway for the
sake of the Principle of Least Surprise.
Fixes#4714.
This is more backwards-compatible with stream1 streams like `fs.WriteStream`
which would allow a callback function to be passed in as the only argument.
Closes#4719.
Inform V8 that the zlib context object is tied to a large off-heap buffer.
This makes the GC run more often (in theory) and improves the accuracy of
--trace_external_memory.
In zlibBuffer(), don't wait for the garbage collector to reclaim the zlib memory
but release it manually. Reduces memory consumption by a factor of 10 or more
with some workloads.
Test case:
function f() {
require('zlib').deflate('xxx', g);
}
function g() {
setTimeout(f, 5);
}
f();
Observe RSS memory usage with and without this commit. After 10,000 iterations,
RSS stabilizes at ~35 MB with this commit. Without, RSS is over 300 MB and keeps
growing.
Cause: whenever the JS object heap hits the high-water mark, the V8 GC sweeps
it clean, then tries to grow it in order to avoid more sweeps in the near
future. Rule of thumb: the bigger the JS heap, the lazier the GC can be.
A side effect of a bigger heap is that objects now live longer. This is harmless
in general but it affects zlib context objects because those are tied to large
buffers that live outside the JS heap, on the order of 16K per context object.
Ergo, don't wait for the GC to reclaim the memory - it may take a long time.
Fixes#4172.
Move the implementation to C++ land. This is similar to commit 3f65916
but this time for the write() function and the Buffer(s, 'hex')
constructor.
Speeds up the benchmark below about 24x (2.6s vs 1:02m).
var s = 'f';
for (var i = 0; i < 26; ++i) s += s; // 64 MB
Buffer(s, 'hex');
If the NODE_DEBUGGER_TIMEOUT environment variable is set, then use
that as the number of ms to wait for the debugger to start.
This is primarily to work around a race condition that almost never
happens in real usage with the debugger, but happens EVERY FRACKING
TIME when the debugger tests run as part of 'make test'.
Move the implementation to C++ land. The old JS implementation used
string concatenation, was dog slow and consumed copious amounts of
memory for large buffers. Example:
var buf = Buffer(0x1000000); // 16 MB
buf.toString('hex') // Used 3+ GB of memory.
The new implementation operates in O(n) time and space.
Fixes#4700.
Those values, if passed to the _read() cb, will not signal an EOF. Only
null or undefined will mark the end of data, and trigger the end event.
However, great care must be taken if you are returning an empty string
or buffer! There must be some other thing somewhere that will trigger
a read() call, because there will never be a readable event fired later.
This is in preparation for CryptoStreams being ported to streams2, where
it is safe to simply stop reading, because the crypto cycle process will
cause it to read(0) again at some future date.
Make lines ending \r\n emit one 'line' event, not two (where the second
one is an empty string).
This adds a new keypress name: 'return' (as in: 'carriage return').
Fixes#3305.
This commit breaks simple/test-stream2-stderr-sync. Need to figure out
a better way, or just accept that `(function W(){stream.write(b,W)})()`
is going to be noisy. People should really be using the `'drain'` event
for this use-case anyway.
This reverts commit 02f7d1bfd8.
Always defer the _write callback. The optimization here was only
relevant in some oddball edge cases that we don't actually care about.
Our benchmarks confirm that just always deferring the Socket._write cb
is perfectly fine to do, and in some cases, even slightly more
performant.
When a datagram socket hasn't been bound yet, node will defer `send()`
operations until binding has completed. Before this patch a `listening`
listener would be installed every time `send` was called. This triggered
an EventEmitter leak warning when more than 10 packets were sent in a
tight loop. Therefore switch to using a single `listening` listener, and
use an array to enqueue outbound packets.
The refactor in b43e544140 to use
stream.push() in Transform inadvertently caused it to immediately
consume all the written data, regardless of whether or not the readable
side was being consumed.
Only pull data through the _transform() process when the readable side
is being consumed.
Fix#4667
TCPWrap::Initialize() and PipeWrap::Initialize() should be called before
any data will be read from received socket. But, because of lazy
initialization of these bindings, Initialize() method isn't called.
Init bindings manually upon socket receiving.
See #4669
Fix the following OOM error in pummel/test-net-connect-memleak
and pummel/test-tls-connect-memleak:
FATAL ERROR: CALL_AND_RETRY_0 Allocation failed - process out of
memory
Commit v8/v8@91afd39 increases the size of the deoptimization table
to the extent that a 64M float array pushes it over the brink. Switch
to SMIs so it stays below the limit.
pummel/test-net-connect-memleak is still failing albeit with a different
error this time. Needs further investigation.
=== release test-net-connect-memleak ===
Path: pummel/test-net-connect-memleak
-64 kB reclaimed
assert.js:102
throw new assert.AssertionError({
^
AssertionError: false == true
at done [as _onTimeout] (/home/bnoordhuis/src/nodejs/master/
test/pummel/test-net-connect-memleak.js:48:3)
at Timer.listOnTimeout [as ontimeout] (timers.js:110:15)
at process._makeCallback (node.js:306:20)
If the end argument is omitted or not a number, make it default to
the end of the buffer, not zero.
Ideally, it should not matter what it defaults to because the JS shim
in lib/buffer.js should handle that but there are still several places
in node.js core that secrete SlowBuffers, hence Buffer::Copy() gets
called without going through Buffer.prototype.copy() first.
It's segfaulting in release mode and asserting in debug mode:
#
# Fatal error in ../../deps/v8/src/api.h, line 297
# CHECK(allow_empty_handle || that != __null) failed
#
This reverts commit 99f0b022d5.
Before sending handle to another process using uv_write2(), it should be
referenced to prevent it from being GCed before AfterWrite() will be
called.
see #4599
mainly to allow native addons to export single functions on `exports`
rather than being restricted to operating on an existing `exports`
object.
added link to addons repo in docs
mainly to allow native addons to export single functions on
rather than being restricted to operating on an existing
object.
Init functions now receive exports as the first argument, like
before, but also the module object as the second argument, if they
support it.
Related to #4634
cc: @rvagg
* Omit ToObject() call. Buffer::Data() and Buffer::Length() know how
to deal with Values.
* Don't check if the argument is undefined because it realistically
never is and undefined->integer coercion achieves the same thing.
Fix issue where SlowBuffers couldn't be passed as target to Buffer
copy().
Also included checks to see if Argument parameters are defined before
assigning their values. This offered ~3x's performance gain.
Backport of 16bbecc from master branch. Closes#4633.
Changed types of errors thrown to be more indicative of what the error
represents. Also removed a few unnecessary uses of the v8 fully
quantified typename.
Argument checks were simplified by setting all undefined/NaN or out of
bounds values equal to their defaults.
Also copy() tests had a flaw that each buffer had the same bit pattern at
the same offset. So even if the copy failed, the bit-by-bit comparison
would have still been true. This was fixed by filling each buffer with a
unique value before copy operations.
Fix issue where SlowBuffers couldn't be passed as target to Buffer
copy().
Also included checks to see if Argument parameters are defined before
assigning their values. This offered ~3x's performance gain.
This adds a proxy for bytesWritten to the tls.CryptoStream. This
change makes the connection object more similar between HTTP and
HTTPS requests in an effort to avoid confusion.
See issue #4650 for more background information.
* npm: Upgrade to v1.2.3
* V8: Upgrade to 3.15.11.10
* streams: Support objects other than Buffers (Jake Verbaten)
* buffer: remove float write range checks (Trevor Norris)
* http: close connection on 304/204 responses with chunked encoding (Ben Noordhuis)
* build: fix build with dtrace support on FreeBSD (Fedor Indutny)
* console: Support formatting options in trace() (isaacs)
* domain: empty stack on all exceptions (Dave Olszewski)
* unix, windows: make uv_*_bind() error codes consistent (Andrius Bentkus)
* linux: add futimes() fallback (Ben Noordhuis)
We detect for non-string and non-buffer values in onread and
turn the stream into an "objectMode" stream.
If we are in "objectMode" mode then howMuchToRead will
always return 1, state.length will always have 1 appended
to it when there is a new item and fromList always takes
the first value from the list.
This means that for object streams, the n in read(n) is
ignored and read() will always return a single value
Fixed a bug with unpipe where the pipe would break because
the flowing state was not reset to false.
Fixed a bug with sync cb(null, null) in _read which would
forget to end the readable stream
This is similar to commit 2cbf458 but this time for 204 No Content
instead of 304 Not Modified responses.
When the user sends a 204 response with a Transfer-Encoding: chunked
header, suppress sending the zero chunk and force the connection to
close.
Removed range checks when writing float values, and removed a few
includes and defines. Also updated api docs to reflect that invalid 32
bit float is an unspecified behavior.
Force the connection to close when the response is a 304 Not Modified
and the user has set a "Transfer-Encoding: chunked" header.
RFC 2616 mandates that 304 responses MUST NOT have a body but node.js
used to send out a zero chunk anyway to accommodate clients that don't
have special handling for 304 responses.
It was pointed out that this might confuse reverse proxies to the point
of creating security liabilities, so suppress the zero chunk and force
the connection to close.
Every constant is certainly 4 bytes now, but freebsd's objdump utility
prints out odd byte sequences (5-bytes, 6-bytes and even 9-bytes long)
for v8's data section. We can safely ignore all upper bytes, because all
constants that we're using are just `int`s. Since on all supported
platforms `int` is 32bit long (and anyway v8's constants are 32bit too),
we ignore all higher bits if they were read.
Fix an off-by-one error introduced in 9fe3734 that caused a regression
in the default endianness used for writes in DataView::setGeneric().
Fixes#4626.
Due to the nature of asyncronous programming, it's impossible to know
what will run on the next tick. Because of this, it's not correct to
maintain domain stack state between ticks
Since the _fatalException handler is only invoked after the stack is
unwound, once it exits the tick will end. The only reasonable thing to
do in that case is to exit *all* domains.
The first example in cluster.markdown requires NODE_DEBUG env to show
debug message.
And also fix the message because it was a little bit different with
the actual message.
* V8: Upgrade to 3.15.11.7
* npm: Upgrade to 1.2.2
* punycode: Upgrade to 1.2.0 (Mathias Bynens)
* repl: make built-in modules available by default (Felix Böhm)
* windows: add support for '_Total' perf counters (Scott Blomquist)
* cluster: make --prof work for workers (Ben Noordhuis)
* child_process: do not keep list of sent sockets (Fedor Indutny)
* tls: Follow RFC6125 more strictly (Fedor Indutny)
* buffer: floating point read/write improvements (Trevor Norris)
* TypedArrays: Improve dataview perf without endian param (Dean McNamee)
* module: assert require() called with a non-empty string (Felix Böhm, James Campos)
* stdio: Set readable/writable flags properly (isaacs)
* stream: Properly handle large reads from push-streams (isaacs)
Profiling in clustered environments doesn't work out of the box.
By default, V8 writes the profile data of all processes to a single
v8.log.
Running that log file through a tick processor produces bogus numbers
because many events won't match up with the recorded memory mappings
and you end up with graphs where 80+% of ticks is unaccounted for.
Fixing the tick processor to deal with multi-process output is not very
useful because the processes may be running wildly disparate workloads.
That's why we fix up the command line arguments to include
a "--logfile=v8-%p.log" argument (where %p is expanded to the PID)
unless it already contains a --logfile argument.
Fixes#4617.
Keeping list of all sockets that were sent to child process causes memory
leak and thus unacceptable (see #4587). However `server.close()` should
still work properly.
This commit introduces two options:
* child.send(socket, { track: true }) - will send socket and track its status.
You should use it when you want to receive `close` event on sent sockets.
* child.send(socket) - will send socket without tracking it status. This
performs much better, because of smaller number of RTT between master and
child.
With both of these options `server.close()` will wait for all sent
sockets to get closed.
Keeping list of all sockets that were sent to child process causes memory
leak and thus unacceptable (see #4587). However `server.close()` should
still work properly.
This commit introduces two options:
* child.send(socket, { track: true }) - will send socket and track its status.
You should use it when you want `server.connections` to be a reliable
number, and receive `close` event on sent sockets.
* child.send(socket) - will send socket without tracking it status. This
performs much better, because of smaller number of RTT between master and
child.
With both of these options `server.close()` will wait for all sent
sockets to get closed.
Unfortunately, it's just too slow to do this in events.js. Users will
just have to live with not having events named __proto__ or toString.
This reverts commit b48e303af0.
'Stability: 5' is described as 'Locked' not as 'API Locked'
in other documents.
For example:
- `/doc/api/assert.markdown`
- `/doc/api/util.markdown`
This word was injected in 192192a.
This test starts two clustered HTTP servers on the same port.
It expects the first cluster to succeed and the second cluster
to fail with EADDRINUSE.
Reapplies commit cacd3ae, accidentally reverted in a2851b6.
Reject negative offsets in SlowBuffer::MakeFastBuffer(), it allows
the creation of buffers that point to arbitrary addresses.
Reported by Trevor Norris.
V8 seems to be particularly slow converting an undefined value to false
in BooleanValue.
Revert this when we upgrade to V8 3.17, or whenever the fix discussed
in http://code.google.com/p/v8/issues/detail?id=2487 lands in V8.
Problem 1: If stream.push() triggers a 'readable' event, and the user
calls `read(n)` with some n > the highWaterMark, then the push() will
return false (indicating that they should not push any more), but no
future 'readable' event is coming (because we're above the
highWaterMark).
Solution: return true from push() when needReadable is set.
Problem 2: A read(n) for n != 0, after the stream had encountered an
EOF, would not trigger the 'end' event if the EOF was pushed in
synchronously by the _read() function.
Solution: Check for ended in stream.read() and schedule an end event if
the length now equals 0.
Fix#4585
Improved assert check order of execution and added additional checks on
parameters to ensure no bad values make it through (e.g. negative offset
values).
Improvements:
* floating point operations are approx 4x's faster
* Now write quiet NaN's
* all read/write on floating point now done in C, so no more need for
lib/buffer_ieee754.js
* float values have more accurate min/max value checks
* add additional benchmarks for buffers read/write
* created benchmark/_bench_timer.js which is a simple library that
can be included into any benchmark and provides an intelligent tracker
for sync and async tests
* add benchmarks for DataView set methods
* add checks and tests to make sure offset is greater than 0
Make tools/install.py work with python 2.5
2.5 is still fairly widespread and does not include a json lib as
standard. Most python folk will have simplejson if they are in that
boat.
In general it seems a bit tricky to solve this perfectly...
There was previously an assert() in there, but this part of the code is
so high-volume that the added cost made a measurable dent in http_simple.
Just checking inline is fine, though, and prevents a lot of potential
hazards.
Say that a stream's current read queue has 101 bytes in it, and the
underlying resource has ended (ie, reached EOF).
If you do something like this:
stream.read(100); // leave a byte behind
stream.read(0); // read(0) for some reason
then the read(0) will get 0 from the howMuchToRead function. Since the
stream was ended, this was incorrectly treating the 0 as a "there is no
more in the buffer", and emitting 'end' before that last byte was read.
Why have the read(0) in the first place? We do this in some cases to
trigger the last few bytes of a net socket (such as a child process's
stdio pipes). This was causing issues when piping a `git archive` job
to a file: the resulting tarball was incomplete, because it occasionally
was not getting the last chunk.
Fix the following exception:
http.js:974
this._httpMessage.emit('close');
^
TypeError: Cannot call method 'emit' of null
at Socket.onServerResponseClose (http.js:974:21)
at Socket.EventEmitter.emit (events.js:124:20)
at net.js:421:10
at process._tickCallback (node.js:386:13)
at process._makeCallback (node.js:304:15)
Fixes#4586.
Remove compiler switches from $(TOPLEVEL)/deps/v8/build/common.gypi,
we set them globally in $(TOPLEVEL)/common.gypi.
Commit 7b4d95a introduced the switches again, resulting in V8 getting
built without any optimizations.
This commit is essentially a rehash of commit 4b8629d.
The int8_t and uint8_t typedefs on sunos/smartos depend on a number of
compiler directives. Avoid ambiguity and specify signed and unsigned
char explicitly.
Fixes the following build error:
../src/stream_wrap.cc: In static member function 'static void*
node::WriteWrap::operator new(size_t)':
../src/stream_wrap.cc:70:49: warning: no return statement in function
returning non-void [-Wreturn-type]
In file included from ../src/v8_typed_array.cc:26:0:
../src/v8_typed_array_bswap.h: In function 'T
v8_typed_array::SwapBytes(T) [with T = signed char]':
../src/v8_typed_array_bswap.h:150:23: instantiated from 'T
v8_typed_array::LoadAndSwapBytes(void*) [with T = signed char]'
../src/v8_typed_array.cc:694:7: instantiated from 'static
v8::Handle<v8::Value> {anonymous}::DataView::getGeneric(const
v8::Arguments&) [with T = signed char]'
../src/v8_typed_array.cc:738:40: instantiated from here
../src/v8_typed_array_bswap.h:125:16: error: size of array is
negative
For example, to cross-compile from my OS X laptop for Raspberry Pi, you would
do something like:
$ make binary BINARYNAME=node-v`python tools/getnodeversion.py`-linux-arm-pi \
DESTCPU=arm CONFIG_FLAGS="--dest-os=linux"
This also slightly changes the semantics, in that a 'readable'
event may be triggered by the first write() call, even if a
user has not yet called read().
This happens because the Transform _write() handler is calling
read(0) to start the flow of data. Technically, the new behavior
is more 'correct', since it is more in line with the semantics
of the 'readable' event in other streams.
Implement load and store swizzling operations. This reduces an unneeded
back and forth between types and additionally keeps the value in the
swappable type until it is swapped. This is important for correctness
when dealing with floating point, to avoid the possibility of loading
the bits of a signaling NaN (because it isn't yet swapped) into the FPU.
This additionally produces better code (comments are mine):
gcc version 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00)
setValue<double>:
movd %xmm0, %rax ; fp reg -> gen reg
bswapq %rax ; 64-bit byte swap
movq %rax, (%r15,%r12) ; store
Implement swizzling with compiler intrinsics and be aware of the native
endianness to correctly swap on big endian machines.
This introduces a template function to swap the bytes of a value,
and macros for the low level swap (taking advantage of gcc and msvc
intrinsics). This produces code like the following (comments are mine):
gcc version 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00)
setValue<double>:
movd %xmm0, %rax ; fp reg -> gen reg
bswapq %rax ; 64-bit byte swap
movd %rax, %xmm0 ; gen reg -> fp reg
movq %xmm0, (%r15,%r12) ; store
When switching into compatibility mode by setting `data` event listener,
`_read()` method will be called immediately. If method implementation
invokes callback in the same tick - all emitted `data` events will be
discarded, because `data` listener wasn't set yet.
Raise a TypeError when the argument to send() or sendto() is anything
but a Buffer.
Fixes the following assertion:
$ node -e 'require("dgram").createSocket("udp4").send("BAM")'
node: ../../src/udp_wrap.cc:220: static v8::Handle<v8::Value>
node::UDPWrap::DoSend(const v8::Arguments&, int): Assertion
`Buffer::HasInstance(args[0])' failed.
Aborted (core dumped)
Fixes#4496.
V8 3.15 has new API functions that let you specify the Isolate. V8 and
node.js generally spend 0.5-3.5% of the time in pthread_getspecific(),
looking up the current Isolate. Avoid that overhead by making "our"
isolate global so we can pass it around. The change to the new API is
introduced in follow-up commits.
The test was failing in debug mode because the timeouts were set too
low. Fix that by increasing the timeouts. Admittedly not a great fix.
If this test keeps playing up, it's probably best to remove it.
Fixes#4528.
Tests can leave the tty in non-blocking mode. If the test runner tries
to print to stdout/stderr after that and the tty buffer is full, it'll
die with a EAGAIN OSError. Ergo, put the tty back in blocking mode
before proceeding.
This test is timing sensitive and hence quite unreliable with debug
builds. What's worse is that it leaves a stray child process behind
that listens on the default test port and that makes all the tests
that come after it fail with EADDRINUSE errors.
Allows for arbitrary path to executable spawned using `fork`. This
fixes some issues around running multiple versions of node with workers
and allows arbitrary IPC with compatible executables.
Fixes#3248.
Use static_cast instead of reinterpret_cast when casting from void*
to another type.
This is mostly an aesthetic change but may help catch bugs when the
affected code is modified.
Remove compiler switches from $(TOPLEVEL)/deps/v8/build/common.gypi,
we set them globally in $(TOPLEVEL)/common.gypi.
Commit 7b4d95a introduced the switches again, resulting in V8 getting
built without any optimizations.
This commit is essentially a rehash of commit 4b8629d.
In JS, the expression ".1" is a floating point number. Issue 4268 concerns the
REPL interpreting floating point numbers that lead with a "." as keywords. The
original bugfix worked for this specific case but not for the general case:
var x = [
.1,
.2,
.3
];
The attached change and test (`.1+.1` should be `.2`) fix the bug.
Closes#4513.
Some performance counter related functions are not available on Windows
XP and Windows Server 2003, which caused node to call a NULL pointer.
Closes#4462Closes#4511
Don't give names of built-in libraries special treatment.
Changes the REPL's behavior from this:
> var path = 42
> path
A different "path" already exists globally
To this:
> var path = 42
> path
42
Fixes#4512.
Remove compiler switches from $(TOPLEVEL)/deps/v8/build/common.gypi,
we set them globally in $(TOPLEVEL)/common.gypi.
Commit 7b4d95a introduced the switches again, resulting in V8 getting
built without any optimizations.
This commit is essentially a rehash of commit 4b8629d.
Calling send() on an unbound socket forces an implicit bind to
a random port.
332fea5 made the 'listening' event asynchronous. Unfortunately,
it also introduced a bug where the implicit bind was tried more
than once if send() was called again before the first bind operation
completed.
Address that by keeping track of the bind status and making sure that
bind() is called only once.
Fixes#4499.
* assert: improve support for new execution contexts (lukebayes)
* domain: use camelCase instead of snake_case (isaacs)
* domain: Do not use uncaughtException handler (isaacs)
* fs: make 'end' work with ReadStream without 'start' (Ben Noordhuis)
* https: optimize createConnection() (Ryunosuke SATO)
* buffer: speed up base64 encoding by 20% (Ben Noordhuis)
* doc: Colorize API stabilitity index headers in docs (Luke Arduini)
* net: socket.readyState corrections (bentaber)
* http: Performance enhancements for http under streams2 (isaacs)
* stream: fix to emit end event on http.ClientResponse (Shigeki Ohtsu)
* stream: fix event handler leak in readstream pipe and unpipe (Andreas Madsen)
* build: Support ./configure --tag switch (Maciej Małecki)
* repl: don't touch `require.cache` (Nathan Rajlich)
* node: Emit 'exit' event when exiting for an uncaught exception (isaacs)
While it's true that error objects have a history of getting snake_case
properties attached by the host system, it's a point of confusion to
Node users that comes up a lot. It's still 'experimental', so best to
change this sooner rather than later.
This adds a process._fatalException method which is called into from
C++ in order to either emit the 'uncaughtException' method, or emit
'error' on the active domain.
The 'uncaughtException' event is an implementation detail that it would
be nice to deprecate one day, so exposing it as part of the domain
machinery is not ideal.
Fix#4375
Make `fs.createReadStream({ end: 42 })` work.
Before this commit, it worked only when used like this:
`fs.createReadStream({ start: 0, end: 42 })` - only when `start` was specified
by the caller.
Fixes#4423.
Remove a lot of branches from the inner loop. Speeds up buf.toString('base64')
by about 20%.
Before:
$ time out/Release/node benchmark/buffer-base64-encode.js
real 0m6.607s
user 0m5.508s
sys 0m1.088s
After:
$ time out/Release/node benchmark/buffer-base64-encode.js
real 0m5.520s
user 0m4.520s
sys 0m0.992s
Noted in @shtylman's #3898, API stability notes are easy to overlook
in the html documentation. This can be especially troublesome if the API
is deprecated. This commit gives visual feedback by adding in a class
to the html docs when they're generated. The API headers with
corresponding colors are also listed in the 'About this Documentation'
page for easy reference.
socket.readyState, .readable, and .writable behavior changed as
a result of the new streaming interfaces. Updated to be backwards
compatible with current API and adds regression test.
closes#4461
When building custom `node` versions (e.g., floating features/fixes from
different versions) it's often useful to specify a custom tag which
easily identifies build when invoking `node -v`.
Introduce a way to specify this tag in `node_version.h` file or by
running `./configure --tag="<tag>"`. Insert it right after the patch
version (and before `-pre`, if build is not a release).
Fix a bug where calling .end() on a socket without calling .connect() first
throws a TypeError:
TypeError: Cannot read property 'shutdown' of undefined
at Socket.onSocketFinish (net.js:194:20)
at Socket.EventEmitter.emit (events.js:91:17)
at Socket.Writable.end (_stream_writable.js:281:10)
at Socket.end (net.js:352:31)
Fixes#4463.
When building custom `node` versions (e.g., floating features/fixes from
different versions) it's often useful to specify a custom tag which
easily identifies build when invoking `node -v`.
Introduce a way to specify this tag in `node_version.h` file or by
running `./configure --tag="<tag>"`. Insert it right after the patch
version (and before `-pre`, if build is not a release).
Closes#4452.
Fixes#3226.
Consider a production server that uses a REPL to debug. Creating the instance
would wipe out the global cache of modules, and subsequent "require" calls in
the server would be reloaded from disk. The REPL should observe only, without
altering, its environment.
Starting a line with `**bold**` text makes it think that it's a link,
and get confused.
This should really be fixed properly in the doc generator, but for now,
it's not a major issue. It's probably just a matter of updating marked.
When perlasm generates MASM code it sets the assembler target to 468.
In this mode MASM refuses to assemble a couple of instructions. Bumping
the target to 686 solves this problem.
This patch brings the openssl library that is built with gyp closer
to what the standard build system produces.
All opensslconf.h versions are now merged into a single file, which
makes it easier for compiled addons to locate this file.
Apply the same optimization to res.end(buf) that is applied to res.end(str).
Speeds up `node benchmark/http_simple_auto -k -c 1 -n 25000 buffer/1`
(non-chunked response body) by about 750x. That's not a typo.
Chunked responses:
$ cat tmp/http-chunked-client.js
// Run `node benchmark/http_simple` in another terminal.
var http = require('http'), url = require('url');
var options = url.parse('http://127.0.0.1:8000/buffer/1/1');
options.agent = new http.Agent({ maxSockets: 1 });
for (var i = 0; i < 25000; ++i) http.get(options);
Before:
$ time out/Release/node tmp/http-chunked-client.js
real 16m40.411s
user 0m9.184s
sys 0m0.604s
After:
$ time out/Release/node tmp/http-chunked-client.js
real 0m5.386s
user 0m2.768s
sys 0m0.728s
That's still a 185x speed-up.
Fixes#4415.
This is very similar to http.sh, but generates a flamegraph
with dtrace, pruning off the single-hit stacks so that we can
more easily see the places where relevant amounts of time are
spent.
Remove the idle garbage collector. Its purpose was to run the garbage collector
when the application is idle but it never worked quite right. Many people have
complained over the years that with heaps > 128 MB, a node.js process never
sleeps anymore; instead, it spends nearly 100% of its CPU time trying to
collect garbage.
Back in the old days, idle GC probably was a good idea. But with V8's current
incremental collector, idle gc appears to offer no time or space benefits
whatsoever and indeed seems actively harmful. Remove it.
Fixes#3870.
Although it is not used externally by node, it is needed by upstream and Plask.
This effectively reverts:
commit 1444801374
Author: Aaron Jacobs <jacobsa@google.com>
Date: Thu Mar 15 13:26:35 2012 +1100
typed arrays: unexport SizeOfArrayElementForType()
It isn't used anywhere else, so made it an implementation detail in
v8_typed_array.cc.
Make parser errors bubble up to the ClientRequest instead of the underlying
net.Socket object.
This is a back-port of commit c78678b from the master branch.
Fixes#3776.
Work around an issue with the glibc malloc() implementation where memory blocks
are never returned to the operating system when they are allocated with brk()
and have overlapping lifecycles.
Fixes#4283.
Streams2 style streams might have already kicked off a read() or write()
before emitting 'data' events. Make the test less dependent on ordering
of when data events occur.
Because of some of the peculiarities of http, this has a bit of special
magic to handle cases where the IncomingMessage would wait forever in a
paused state.
In the server, if you do not begin consuming the request body by the
time the response emits 'finish', then it will be flushed out.
In the client, if you do not add a 'response' handler onto the request,
then the response stream will be flushed out.
This is a combination of 6 commits.
* XXX net fixup lcase stream
* net: Refactor to use streams2
Use 'socket.resume()' in many tests to trigger old-mode behavior.
* net: Call destroy() if shutdown() is not provided
This is important for TTY wrap streams
* net: Call .end() in socket.destroySoon if necessary
This makes the http 1.0 keepAlive test pass, also.
* net wtf-ish stuff kinda busted
* net fixup
Otherwise (especially with stdin) you sometimes end up in cases
where the high water mark is zero, and the current buffer is at 0,
and it doesn't need a readable event, so it never calls _read().
This fixes the CONNECT/Upgrade HTTP functionality, which was not getting
sliced properly, because readable wasn't emitted on this tick.
Conflicts:
test/simple/test-http-connect.js
Verifies that the callback gets invoked <n> times during the lifetime of the
test script.
This is a back-port of commit d0e6c3f from the master branch.
Don't allow connections to stall indefinitely if the SSL/TLS handshake does
not complete.
Adds a new tls.Server and https.Server configuration option, handshakeTimeout.
Fixes#4355.
The test assumes the parent and the child are scheduled fairly. Probably true
most of the time but not always, making it fail spuriously.
Bad test, remove it.
V8 debug agent needs some time to be ready and no longer sends the first event
break response to a debug client. We wait some time to connect the agent and
check its break status by obtaining breakpoint list and seeing if it exists on
line 0.
Enable long stacktraces if NODE_DEBUG=fs is set in the environment. Only
applies to the default rethrow callback; it's to help you find places where
you forgot to pass in a callback.
Use a default callback if the user omitted one. Avoids errors like the one
below:
fs.js:777
if (err) return callback(err);
^
TypeError: object is not a function
at fs.appendFile (fs.js:777:21)
at Object.oncomplete (fs.js:297:15)
This commit fixes the behavior of fs.lchmod(), fs.lchown() and fs.readFile()
when the callback is omitted. Before, they silently swallowed errors.
Fixes#4352.
Just sends a buffer to a server, which echoes it back, and then measures
the Gbits/second. Very similar to throughput.js, but using a single
process, so that it's possible to dtrace and get the jsstack frames for
profile comparison.
Fix#4331
Using double negate forces values into 32bit space. Because of this
Math.ceil needs to be used. Since NaN comparisons are always false, use
that to our advantage to return 0 if it is.
Also added two tests to verify the changes.
* Added isIP method to make use of inet_pton to cares_wrap.cc
* Modified net.isIP() to make use of new C++ isIP method.
* Added new tests to test-net-isip.js.
This is a back-port of commit fb6377e from the master branch.
Disabled the following unit tests:
* test-eio-race.js
* test-eio-race2.js
* test-eio-race4.js
These tests are known to fail on busy boxes due to being timing sensitive,
and are deemed not meaningful tests.
See https://github.com/joyent/node/issues/4272Fixes#4272.
* npm: Upgrade to 1.1.66 (isaacs)
* linux: use /proc/cpuinfo for CPU frequency (Ben Noordhuis)
* windows: map WSAESHUTDOWN to UV_EPIPE (Ben Noordhuis)
* windows: map ERROR_GEN_FAILURE to UV_EIO (Bert Belder)
* unix: do not set environ unless one is provided (Charlie McConnell)
* domains: don't crash if domain is set to null (Bert Belder)
* windows: fix the x64 debug build (Bert Belder)
* net, tls: fix connect() resource leak (Ben Noordhuis)
OR'ing together two large values, like `SSL_OP_ALL | SSL_OP_NO_TICKET`,
produces a negative number. To wit:
assert((0x80000000 | 0x4000) === -0x7fffc000); // true
assert((0x80000000 | 0x4000) === 0x80004000); // false!
It's easy to work around by doing a logical shift, like this:
assert((0x80000000 | 0x4000) >>> 0 === 0x80004000); // true
But that's not very intuitive. Let's be more lenient in what we accept.
* fix gyp build
* don't require libexecinfo, it's not there
* libpthread doesn't implement sem_timedwait(), fall back to sem_wait()
Upstreamed in https://codereview.chromium.org/11421013/
The purpose of this file was to remap the old libeio API to the new one.
We dropped libeio in ee77a6a and this file has been broken ever since.
Ergo, remove it.
While updating the readline test cases to test both "terimal: false" and
"terminal: true" mode, it turned out that the test case testing utf8 chars
being sent over multiple write() calls was failing. The solution is to use
a string_decoder instance when parsing the "keypress" events.
Before this commit, readline was inconsistent in whether or not it would emit
"line" events with or without the trailing "\n" included. When "terminal"
mode was true, then there would be no "\n", when it was false, then the "\n"
would be present. However, the trailing "\n" doesn't add much, and most of the
time people just end up stripping it manually.
Part of #4243.
* Added isIP method to make use of inet_pton to cares_wrap.cc
* Modified net.isIP() to make use of new C++ isIP method.
* Added new tests to test-net-isip.js.
DTrace on Linux should not be enabled by default because not all systems will
have the proper headers installed. Only enable when --with-dtrace is passed to
the configure script.
`url.format` should escape ? and # chars in pathname, and # chars in
search, because they change the semantics of the operation otherwise.
Don't escape % chars, or anything else. (see: #4082)
Inform V8 that the zlib context object is tied to a large off-heap buffer.
This makes the GC run more often (in theory) and improves the accuracy of
--trace_external_memory.
In zlibBuffer(), don't wait for the garbage collector to reclaim the zlib memory
but release it manually. Reduces memory consumption by a factor of 10 or more
with some workloads.
Test case:
function f() {
require('zlib').deflate('xxx', g);
}
function g() {
setTimeout(f, 5);
}
f();
Observe RSS memory usage with and without this commit. After 10,000 iterations,
RSS stabilizes at ~35 MB with this commit. Without, RSS is over 300 MB and keeps
growing.
Cause: whenever the JS object heap hits the high-water mark, the V8 GC sweeps
it clean, then tries to grow it in order to avoid more sweeps in the near
future. Rule of thumb: the bigger the JS heap, the lazier the GC can be.
A side effect of a bigger heap is that objects now live longer. This is harmless
in general but it affects zlib context objects because those are tied to large
buffers that live outside the JS heap, on the order of 16K per context object.
Ergo, don't wait for the GC to reclaim the memory - it may take a long time.
Fixes#4172.
The gyp target node_etw didn't list its output dependencies. This
was causing virgin builds to fail with a "failed to open file for
write" error.
With this corrected outputs list, gyp reliably pre-creates
required output directories.
* V8: Upgrade to 3.11.10.25
* npm: Upgrade to 1.1.65
* url: parse hostnames that start with - or _ (Ben Noordhuis)
* repl: Fix Windows 8 terminal issue (Bert Belder)
* typed arrays: use signed char for signed int8s (Aaron Jacobs)
* crypto: fix bugs in DiffieHellman (Ben Noordhuis)
* configure: turn on VFPv3 on ARMv7 (Ben Noordhuis)
* Re-enable OpenSSL UI for entering passphrases via tty (Ben Noordhuis)
* repl: ensure each REPL instance gets its own "context" (Nathan Rajlich)
Always add domain, _events, and _maxListeners properties, set to the
default values at first.
Leads to a very very slight perf improvement when using setMaxListeners,
or dealing with a lot of EE objects that don't have any listeners.
Remove compiler switches from $(TOPLEVEL)/deps/v8/build/common.gypi, we set
them globally in $(TOPLEVEL)/common.gypi.
Commit 29d12c73 accidentally reintroduced the switches again. In particular,
the 'cflags!': ['-O2','-Os'] section forced building V8 without any
optimizations, resulting in a steep (~66%) performance drop on some benchmarks.
Fixes#4191.
This is a flag to make it easier for users to upgrade through the
breaking crypto change, and easier for us to switch it back if it's a
problem.
Explicitly set default encoding to 'buffer' in other tests, in case it
ever changes back.
crypto: Hash and Hmac default to buffers
crypto: Move Cipher encoding logic to JS
crypto: Move Cipheriv encoding logic to JS
crypto: Move Decipher encoding logic to JS
crypto: Move Decipheriv into JS, default to buffers
crypto: Move Sign class to JS
crypto: Better encoding handling in Hash.update
crypto: Move Verify class to JS
crypto: Move DiffieHellman to JS, default to buffers
crypto: Move DiffieHellmanGroup to JS, default to buffers
Also, create a test for this feature
`timezone` variable contains the difference, in seconds, between UTC and
local standard time (see `man 3 localtime` on Solaris).
Call to `tzset` is required to apply contents of `TZ` variable to
`timezone` variable.
BUG=v8:2064
Review URL: https://chromiumcodereview.appspot.com/10967066
Patch from Maciej Małecki <me@mmalecki.com>.
This is a back-port of upstream commit r12802.
Fix a use-after-free bug and a memory leak in the error path of
DiffieHellman::ComputeSecret().
* the BIGNUM key was used after being freed with BN_free().
* the output buffer was not freed
Previously, the "global" mode of REPLs was broken when created after another
non-global REPL (they would end up sharing the same context). Now that "global"
mode is fixed for that case (b1e78cef09), this
test case gets its global scope modified with "module" and other REPL-specific
properties, so disable the global check.
This reverts commit 1c88c3b3b5.
It breaks the "read a password from stdin" functionality that OpenSSL provides.
Fixes#4059, #4143.
Conflicts:
deps/openssl/openssl.gyp
* The 'close' event doesn't emit an error object.
* It's possible for a 'close' event to come after an 'end' event, contrary to
what the documentation said.
Fixes#4116.
Before there was this weird module-scoped "context" variable which seemingly
shared the "context" of subsequent REPL instances, unless ".clear" was invoked
inside the REPL. To be proper, we need to ensure that each REPL gets its own
"context" object. I literally don't know why this "sharing" behavior was in place
before, but it was just plain wrong.
Make buffers report the proper retained size in heap snapshots.
Before this commit, Buffer objects would show up in the heap profiler as being
only a few hundred bytes large, even if the actual buffer was many megabytes.
Consolidates all the formatting options into an "options" object argument.
This is so that we don't have to be constantly remembering the order of
the arguments and so that we can add more formatting options easily.
Closes#4085.
Listen for the 'clientError' event that is emitted when a renegotation attack
is detected and close the connection.
Fixes test/pummel/test-https-ci-reneg-attack.js
Make the 'listening' event handler in the master process see the actual port
that the worker bound to when the worker specified port 0, i.e. a random port.
Encoding failures can be somewhat confusing, especially when they are due to
control flow frameworks auto-filling parameters from the previous step output
values to functions (such as toString and write) that developers don't expect
to take an encoding parameter. By outputting the value as part of the message,
should make it easier to track down these sort of bugs.
This reverts commit 790d651f0d.
This makes Duplex streams unworkable, and would only ever be a special
case for HTTP responses, which is not ideal.
Intead, we're going to just bless the 'finish' event for all Writable
streams in 0.10
Just as the 'WWW-Authenticate' HTTP header the 'Proxy-Authenticate' header might
be received several times as well. Currently only one value is preserved. This
change allows to receive multiple values concatenated by space and comma.
Just as the 'WWW-Authenticate' HTTP header the 'Proxy-Authenticate' header might
be received several times as well. Currently only one value is preserved. This
change allows to receive multiple values concatenated by space and comma.
When perlasm generates MASM code it sets the assembler target to 468.
In this mode MASM refuses to assemble the CPUID instruction. Bumping
the target to 586 solves this problem.
A child process created with .fork() needed to call `process.exit()` explicitly
because the communication channel with the parent kept the event loop alive.
Fix that by only ref'ing the channel when there are 'message' event listeners.
Fixes#3799.
This addresses #4034. There are two problems happening:
1. The domain is not exited automatically when calling dispose() on it.
Then, since the domain is disposed, attempting to exit it again will do
nothing.
2. The active domain is stored on process.domain. Since thrown errors
call `process.emit('uncaughtException', er)`, and the process is an
event emitter with a `.domain` member, it re-enters the domain a second
time before calling the error handler, pushing it onto the stack again.
Thus, if the handler calls `domain.dispose()`, then the domain is now on
the stack twice, and cannot be exited properly. Since the domain is
disposed, any subsequent IO will be no-op'ed, since we've declared that
this context is done and best forgotten.
The solution here is twofold:
1. In EventEmitter.emit, do not enter the domain if `this===process`.
2. Automatically exit the domain when calling `domain.dispose()`.
Make sure the deletion event gets reported in the following scenario:
1. Watch a file.
2. The initial stat() goes okay.
3. Something deletes the watched file.
4. The second stat() fails with ENOENT.
The second stat() translates into the first 'change' event but a logic error
stopped it from getting emitted.
Fixes#4027.
Update the tls and https tests to explicitly set rejectUnauthorized instead of
relying on the NODE_TLS_REJECT_UNAUTHORIZED environment variable getting set.
This commit changes the default value of the rejectUnauthorized option from
false to true.
What that means is that tls.connect(), https.get() and https.request() will
reject invalid server certificates from now on, including self-signed
certificates.
There is an escape hatch: if you set the NODE_TLS_REJECT_UNAUTHORIZED
environment variable to the literal string "0", node.js reverts to its
old behavior.
Fixes#3949.
Fix the following error:
FSEventWrap: Aborting due to unwrap failure at ../../src/fs_event_wrap.cc:169
It's possible and legal for a handle to be closed twice. HandleWrap::Close()
deals with that by ignoring the second close. Now FSEventWrap::Close() does
too.
Fixes#3997.
Check that the calls to Integer::New() and Date::New() succeed and bail out if
they don't.
V8 returns an empty handle on stack overflow. Trying to set the empty handle as
a property on an object results in a NULL pointer dereference in release builds
and an assert in debug builds.
Fixes#4015.
These patches were provided by Android and Chromium. In this form they
are not useful. The ones that we need are landed as separate commits.
As of openssl 1.0.1c, three of them made it upstream:
* npn.patch (Next Protocol Negotiation support)
* tls_exporter.patch (RFC 5705 Keying Material Exporters for TLS)
* openssl_no_dtls1.patch (minor bugfix)
Use a empty implementation for function OPENSSL_cpuid_setup to resolve link
error. We should figure out how to geenrate platform specific implementation
of OPENSSL_cpuid_setup by leveraging crypto/*cpuid.pl.
This patch is taken from Chromium.
ASN1_STRING_to_UTF8() passes an ASN1_STRING to ASN1_STRING_set() but
forgot to initialize the `length` field.
Fixes the following valgrind error:
$ valgrind -q --track-origins=yes --num-callers=19 \
out/Debug/node test/simple/test-tls-client-abort.js
==2690== Conditional jump or move depends on uninitialised value(s)
==2690== at 0x784B69: ASN1_STRING_set (asn1_lib.c:382)
==2690== by 0x809564: ASN1_mbstring_ncopy (a_mbstr.c:204)
==2690== by 0x8090F0: ASN1_mbstring_copy (a_mbstr.c:86)
==2690== by 0x782F1F: ASN1_STRING_to_UTF8 (a_strex.c:570)
==2690== by 0x78F090: asn1_string_canon (x_name.c:409)
==2690== by 0x78EF17: x509_name_canon (x_name.c:354)
==2690== by 0x78EA7D: x509_name_ex_d2i (x_name.c:210)
==2690== by 0x788058: ASN1_item_ex_d2i (tasn_dec.c:239)
==2690== by 0x7890D4: asn1_template_noexp_d2i (tasn_dec.c:746)
==2690== by 0x788CB6: asn1_template_ex_d2i (tasn_dec.c:607)
==2690== by 0x78877A: ASN1_item_ex_d2i (tasn_dec.c:448)
==2690== by 0x7890D4: asn1_template_noexp_d2i (tasn_dec.c:746)
==2690== by 0x788CB6: asn1_template_ex_d2i (tasn_dec.c:607)
==2690== by 0x78877A: ASN1_item_ex_d2i (tasn_dec.c:448)
==2690== by 0x787C93: ASN1_item_d2i (tasn_dec.c:136)
==2690== by 0x78F5E4: d2i_X509 (x_x509.c:141)
==2690== by 0x7C9B91: PEM_ASN1_read_bio (pem_oth.c:81)
==2690== by 0x7CA506: PEM_read_bio_X509 (pem_x509.c:67)
==2690== by 0x703C9A: node::crypto::SecureContext::AddRootCerts(v8::Arguments const&) (node_crypto.cc:497)
==2690== Uninitialised value was created by a stack allocation
==2690== at 0x782E89: ASN1_STRING_to_UTF8 (a_strex.c:560)
There are many symbolic links under /etc/ssl/certs created by using hash of
the pem certificates in order for OpenSSL to find those certificate.
Openssl has a tool to help you create hash symbolic links. (See tools/c_rehash)
However the new openssl changed the hash algorithm, Unless you compile/install
the latest openssl library and re-create all related symbolic links, the new
openssl can not find some certificates because the links of those certificates
were created by using old hash algorithm, which causes some tests failed.
This patch gives a way to find a certificate according to its hash by using both
new algorithm and old algorithm.
crbug.com/111045 is used to track this issue.
This patch is taken from the Chromium project.
Enables SSL3+ clients to send application data immediately following the
Finished message even when negotiating full-handshakes. With this patch,
clients can negotiate SSL connections in 1-RTT even when performing
full-handshakes.
This patch is taken from the Android Open Source Project.
SSL records may be as large as 16K, but are typically < 2K. In
addition, a historic bug in Windows allowed records to be as large
32K. OpenSSL statically allocates read and write buffers (34K and
18K respectively) used for processing records.
With this patch, OpenSSL statically allocates 4K + 4K buffers, with
the option of dynamically growing buffers to 34K + 4K, which is a
saving of 44K per connection for the typical case.
This patch is taken from the Android Open Source Project.
A HTTP/1.0 client does not support 'Transfer-Encoding: chunked' unless it
explicitly requests it by sending a 'TE: chunked' header.
Before this commit, node.js always disabled chunked encoding for HTTP/1.0
clients. Now it will scan for the TE header and turn on chunked encoding if
requested and applicable.
Fixes#940.
Don't execute the callback in the context of the global object.
MakeCallback() tries to apply the active domain to the callback. If the user
polluted the global object with a 'domain' property, as in the code example
below, MakeCallback() will try to apply that.
Example:
domain = {}; // missing var keyword is intentional
crypto.randomBytes(8, cb); // TypeError: undefined is not a function
Fixes#3956.
pthread_t is a pointer type on OS X but an unsigned long on most other
platforms. Use a C style cast because reinterpret_cast nor static_cast
work in all cases.
With this patch the IPC socket is no longer available in the
ChildProcess.stdio array. This shouldn't be very problematic, since
this socket was effectively non-functional; it would never emit any
events.
Throw an exception in the tls.Server constructor when the options object
doesn't contain either a PFX or a key/certificate combo.
Said change exposed a bug in simple/test-tls-junk-closes-server. Addressed.
Fixes#3941.
It takes an optional "expected exception" argument that is not used meaningfully
but is nevertheless documented. Undocument it, it confuses casual readers of the
documentation.
Fixes#3935.
* buffer: Add Buffer.isEncoding(enc) to test for valid encoding values (isaacs)
* Raise UV_ECANCELED on premature close. (Ben Noordhuis)
* Remove c-ares from libuv, move to a top-level node dependency (Bert Belder)
* ref/unref for all HandleWraps, timers, servers, and sockets (Timothy J Fontaine)
* addon: remove node-waf, superseded by node-gyp (Ben Noordhuis)
* child_process: emit error on exec failure (Ben Noordhuis)
* cluster: do not use internal server API (Andreas Madsen)
* constants: add O_DIRECT (Ian Babrou)
* crypto: add sync interface to crypto.pbkdf2() (Ben Noordhuis)
* darwin: emulate fdatasync() (Fedor Indutny)
* dgram: make .bind() always asynchronous (Ben Noordhuis)
* events: Make emitter.listeners() side-effect free (isaacs, Joe Andaverde)
* fs: Throw early on invalid encoding args (isaacs)
* fs: fix naming of truncate/ftruncate functions (isaacs)
* http: bubble up parser errors to ClientRequest (Brian White)
* linux: improve cpuinfo parser on ARM and MIPS (Ben Noordhuis)
* net: add support for IPv6 addresses ending in :: (Josh Erickson)
* net: support Server.listen(Pipe) (Andreas Madsen)
* node: don't scan add-on for "init" symbol (Ben Noordhuis)
* remove process.uvCounters() (Ben Noordhuis)
* repl: console writes to repl rather than process stdio (Nathan Rajlich)
* timers: implement setImmediate (Timothy J Fontaine)
* tls: fix segfault in pummel/test-tls-ci-reneg-attack (Ben Noordhuis)
* tools: Move gyp addon tools to node-gyp (Nathan Rajlich)
* unix: preliminary signal handler support (Ben Noordhuis)
* unix: remove dependency on ev_child (Ben Noordhuis)
* unix: work around darwin bug, don't poll() on pipe (Fedor Indutny)
* util: Formally deprecate util.pump() (Ben Noordhuis)
* windows: make active and closing handle state independent (Bert Belder)
* windows: report spawn errors to the exit callback (Bert Belder)
* windows: signal handling support with uv_signal_t (Bert Belder)
Removed NO_CAST, NO_MD2 and NO_STORE because otherwise there were build errors.
Added NO_CAMELLIA, NO_MDC2, and NO_CMS because otherwise there were linker errors.
* V8: upgrade to 3.11.10.19
* npm: upgrade to 1.1.59
* windows: fix uninitialized memory access in uv_update_time() (Bert Belder)
* unix, windows: fix memory corruption in fs-poll.c (Ben Noordhuis)
* unix: fix integer overflow in uv_hrtime (Tim Holy)
* sunos: fix uv_cpu_info() on x86_64 (Ben Noordhuis)
* tls: update default cipher list (Ben Noordhuis)
* unix: Fix llvm and older gcc duplicate symbol warnings (Bert Belder)
* fs: fix use after free in stat watcher (Ben Noordhuis)
* build: Fix using manually compiled gcc on OS X (Nathan Rajlich)
* windows: make junctions work again (Bert Belder)
Update the default cipher list from RC4-SHA:AES128-SHA:AES256-SHA
to ECDHE-RSA-AES128-SHA256:AES128-GCM-SHA256:RC4:HIGH:!MD5:!aNULL:!EDH
in order to mitigate BEAST attacks.
The documentation suggested AES256-SHA but unfortunately that's a CBC cipher
and therefore susceptible to attacks.
Fixes#3900.
These explicit instantiations were added to make MSVC happy. It turns
out that some older versions of gcc and llvm now complain about duplicate
symbols, so we instantiate these templates only when MSVC is used.
These explicit instantiations were added to make MSVC happy. It turns
out that some older versions of gcc and llvm now complain about duplicate
symbols, so we instantiate these templates only when MSVC is used.
This is the only thing preventing a manually compiled version of GCC
(rather than Apple's provided llvm-gcc or heavily modified gcc 4.2)
from working properly, so we might as well enable support for that.
With this patch I was able to compile node using a manually compiled
gcc 4.7.1.
Closes#3887.
Ensure that the delay >= 0 when detaching the timer from the queue. Fixes the
following assertion:
uv_timer_start: Assertion `timeout >= 0' failed.
No test included, it's timing sensitive.
Just install whatever's best for the OS.
Detect host os and architecture from the navigator properties. If we
can't make a good guess, then they get the tarball, and of course
everything we have is on the full download page.
* valgrind complained too much about memory leaks from the V8 heap to be
useful, run it with --leak-check=no. Not ideal, needs to be revisited,
preferably with a suppression file.
* tools/run-valgrind.py didn't deal with tests that logged to stderr, rewrite
the heuristic and make valgrind write to a socket instead of stderr.
Fixes#3869.
Commit 4e5fe2d changed the way how process.nextTick() works:
process.nextTick(function foo() {
process.nextTick(function bar() {
// ...
});
});
Before said commit, foo() and bar() used to run on separate event loop ticks
but that is no longer the case.
However, that's exactly the behavior that the TLS renegotiation attack guard
relies on. It gets called by OpenSSL and needs to defer the 'error' event to a
later tick because the default action is to destroy the TLS context - the same
context that OpenSSL currently operates on.
When things change underneath your feet, bad things happen and OpenSSL is no
exception. Ergo, use setImmediate() instead of process.nextTick() to ensure
that the 'error' event is actually emitted at a later tick.
Fixes#3840.
The test relied on a peculiarity of process.nextTick() that was changed in
commit 4e5fe2d. Before that commit, each nextTick callback corresponded with
the event loop moving forward one tick. That's no longer the case.
pummel/test-net-throttle assumes that a couple of big write requests result in
some of them getting queued because the kernel's send buffer fills up.
Said assumption breaks on systems with large send buffers. Raise the size of
the write request to ameliorate the issue.
Fixes a minor oversight introduced in 168a555, resulting in the following error:
fs.js:467
return fs.ftruncateSync(path, len, callback);
^
ReferenceError: callback is not defined
at Object.fs.truncateSync (fs.js:467:40)
This commit reverts the following commits (in reverse chronological order):
74d076c errnoException must be done immediately
ddb02b9 net: support Server.listen(Pipe)
085a098 cluster: do not use internal server API
d138875 net: lazy listen on handler
Commit d138875 introduced a backwards incompatible change that broke the
simple/test-net-socket-timeout and simple/test-net-lazy-listen tests - it
defers listening on the target port until the `net.Server` instance has at
least one 'connection' event listener.
The other patches had to be reverted in order to revert d138875.
Fixes#3832.
The destroy() method of fs.ReadStream and fs.WriteStream takes a callback.
It's a leftover from the node 0.1 days, undocumented and not part of the
streams API. Remove it.
Bump NODE_MODULE_VERSION so old modules won't load without recompiling when
the next major release (v0.10) comes out.
This is necessary because the ABI changes between major releases.
* punycode: update to v1.1.1 (Mathias Bynens)
* c-ares: upgrade to 1.9.0 (Saúl Ibarra Corretgé)
* dns: ignore rogue DNS servers reported by windows (Saúl Ibarra Corretgé)
* unix: speed up uv_async_send() (Ben Noordhuis)
* darwin: get cpu model correctly on mac (Xidorn Quan)
* nextTick: Handle tick callbacks before any other I/O (isaacs)
* Enable color customization of `util.inspect` (Pavel Lang)
* tls: Speed and memory improvements (Fedor Indutny)
* readline: Use one history item for reentered line (Vladimir Beloborodov)
* Fix#3521 Make process.env more like a regular Object (isaacs)
When there is an error that is thrown in a nextTick function, which is
then handled by a domain or other process.on('uncaughtException')
handler, if the error handler *also* adds a nextTick and triggers
multiple MakeCallback events (ie, by doing some I/O), then it would
skip over the tickDepth check, resulting in an infinite spin.
Solution: Check the tickDepth at the start of the tick processing, and
preserve it when we are cleaning up in the error case or exiting early
in the re-entry case.
In order to make sure that tick callbacks are *eventually* handled, any
callback triggered by the underlying spinner in libuv will be processed
as if starting from a tick depth of 0.
This is rewrite of #3701 and #3603 before.
This patch introduce `util.inspect.styles`
and `util.inspect.colors` objects, which enables customization
of color sequences.
This reverts commit 6d98524609.
This reverts commit 60ff789618.
closure_linter now depends on the gflags module and not everyone will have that
installed by default.
For some reason, though, it looks like EnvGetter is not called for the
key `__proto__`, so I can't make the info->Data() accessible. However,
putting the Object.prototype keys there, in such a way that they are not
OwnProperties, and are supersceded by environs, makes process.env much
less weird.
We already enable -fstrict-aliasing when gcc >= 4.6.0 but let's enable it for
gcc < 4.5.0 as well. The aliasing bugs that we ran into in the past are all
particular to the 4.5.x releases.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
